carl9170fw/carlfw/src/rf.c

   1 /*
   2  * carl9170 firmware - used by the ar9170 wireless device
   3  *
   4  * PHY and RF functions
   5  *
   6  * Copyright (c) 2000-2005 ZyDAS Technology Corporation
   7  * Copyright (c) 2007-2009 Atheros Communications, Inc.
   8  * Copyright    2009    Johannes Berg <johannes@sipsolutions.net>
   9  * Copyright 2009-2011  Christian Lamparter <chunkeey@googlemail.com>
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License along
  22  * with this program; if not, write to the Free Software Foundation, Inc.,
  23  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  24  */
  25
  26 #include "carl9170.h"
  27 #include "timer.h"
  28 #include "printf.h"
  29 #include "rf.h"
  30 #include "shared/phy.h"
  31
  32 #ifdef CONFIG_CARL9170FW_RADIO_FUNCTIONS
  33 static void set_channel_end(void)
  34 {
  35         /* Manipulate CCA threshold to resume transmission */
  36         set(AR9170_PHY_REG_CCA_THRESHOLD, 0x0);
  37         /* Disable Virtual CCA */
  38         andl(AR9170_MAC_REG_QOS_PRIORITY_VIRTUAL_CCA,
  39              ~AR9170_MAC_VIRTUAL_CCA_ALL);
  40
  41         fw.phy.state = CARL9170_PHY_ON;
  42 }
  43
  44 void rf_notify_set_channel(void)
  45 {
  46         /* Manipulate CCA threshold to stop transmission */
  47         set(AR9170_PHY_REG_CCA_THRESHOLD, 0x300);
  48         /* Enable Virtual CCA */
  49         orl(AR9170_MAC_REG_QOS_PRIORITY_VIRTUAL_CCA,
  50             AR9170_MAC_VIRTUAL_CCA_ALL);
  51
  52         /* reset CCA stats */
  53         fw.tally.active = 0;
  54         fw.tally.cca = 0;
  55         fw.tally.tx_time = 0;
  56         fw.phy.state = CARL9170_PHY_OFF;
  57 }
  58
  59 /*
  60  * Update delta slope coeff man and exp
  61  */
  62 static void hw_turn_off_dyn(const uint32_t delta_slope_coeff_exp,
  63                             const uint32_t delta_slope_coeff_man,
  64                             const uint32_t delta_slope_coeff_exp_shgi,
  65                             const uint32_t delta_slope_coeff_man_shgi)
  66 {
  67         uint32_t tmp;
  68
  69         tmp = get_async(AR9170_PHY_REG_TIMING3) & 0x00001fff;
  70         tmp |= (delta_slope_coeff_man << AR9170_PHY_TIMING3_DSC_MAN_S) &
  71                 AR9170_PHY_TIMING3_DSC_MAN;
  72         tmp |= (delta_slope_coeff_exp << AR9170_PHY_TIMING3_DSC_EXP_S) &
  73                 AR9170_PHY_TIMING3_DSC_EXP;
  74
  75         set(AR9170_PHY_REG_TIMING3, tmp);
  76
  77         tmp = (delta_slope_coeff_man_shgi << AR9170_PHY_HALFGI_DSC_MAN_S) &
  78                 AR9170_PHY_HALFGI_DSC_MAN;
  79
  80         tmp |= (delta_slope_coeff_exp_shgi << AR9170_PHY_HALFGI_DSC_EXP_S) &
  81                 AR9170_PHY_HALFGI_DSC_EXP;
  82
  83         set(AR9170_PHY_REG_HALFGI, tmp);
  84 }
  85
  86 static void program_ADDAC(void)
  87 {
  88         /* ??? Select Internal ADDAC ??? (is external radio) */
  89         set(AR9170_PHY_REG_ADC_SERIAL_CTL, AR9170_PHY_ADC_SCTL_SEL_EXTERNAL_RADIO);
  90
  91         delay(10);
  92
  93         set(0x1c589c, 0x00000000);      /*# 7-0 */
  94         set(0x1c589c, 0x00000000);      /*# 15-8 */
  95         set(0x1c589c, 0x00000000);      /*# 23-16 */
  96         set(0x1c589c, 0x00000000);      /*# 31- */
  97
  98         set(0x1c589c, 0x00000000);      /*# 39- */
  99         set(0x1c589c, 0x00000000);      /*# 47- */
 100         set(0x1c589c, 0x00000000);      /*# 55- [48]:doubles the xtalosc bias current */
 101         set(0x1c589c, 0x00000000);      /*# 63- */
 102
 103         set(0x1c589c, 0x00000000);      /*# 71- */
 104         set(0x1c589c, 0x00000000);      /*# 79- */
 105         set(0x1c589c, 0x00000000);      /*# 87- */
 106         set(0x1c589c, 0x00000000);      /*# 95- */
 107
 108         set(0x1c589c, 0x00000000);      /*# 103- */
 109         set(0x1c589c, 0x00000000);      /*# 111- */
 110         set(0x1c589c, 0x00000000);      /*# 119- */
 111         set(0x1c589c, 0x00000000);      /*# 127- */
 112
 113         set(0x1c589c, 0x00000000);      /*# 135- */
 114         set(0x1c589c, 0x00000000);      /*# 143- */
 115         set(0x1c589c, 0x00000000);      /*# 151- */
 116         set(0x1c589c, 0x00000030);      /*# 159- #[158:156]=xlnabufmode */
 117
 118         set(0x1c589c, 0x00000004);      /*# 167-  [162]:disable clkp_driver to flow */
 119         set(0x1c589c, 0x00000000);      /*# 175- */
 120         set(0x1c589c, 0x00000000);      /*# 183-176 */
 121         set(0x1c589c, 0x00000000);      /*# 191-184 */
 122
 123         set(0x1c589c, 0x00000000);      /*# 199- */
 124         set(0x1c589c, 0x00000000);      /*# 207- */
 125         set(0x1c589c, 0x00000000);      /*# 215- */
 126         set(0x1c589c, 0x00000000);      /*# 223- */
 127
 128         set(0x1c589c, 0x00000000);      /*# 231- */
 129         set(0x1c58c4, 0x00000000);      /*# 233-232 */
 130
 131         delay(10);
 132
 133         /* Select External Flow ???? (is internal addac??) */
 134         set(AR9170_PHY_REG_ADC_SERIAL_CTL, AR9170_PHY_ADC_SCTL_SEL_INTERNAL_ADDAC);
 135 }
 136
 137 static uint32_t AGC_calibration(uint32_t loop)
 138 {
 139         uint32_t wrdata;
 140         uint32_t ret;
 141
 142 #define AGC_CAL_NF      (AR9170_PHY_AGC_CONTROL_CAL | AR9170_PHY_AGC_CONTROL_NF)
 143
 144         wrdata = get_async(AR9170_PHY_REG_AGC_CONTROL) | AGC_CAL_NF;
 145         set(AR9170_PHY_REG_AGC_CONTROL, wrdata);
 146
 147         ret = get_async(AR9170_PHY_REG_AGC_CONTROL) & AGC_CAL_NF;
 148
 149         /* sitesurvey : 100 ms / current connected 200 ms */
 150         while ((ret != 0) && loop--) {
 151                 udelay(100);
 152
 153                 ret = get_async(AR9170_PHY_REG_AGC_CONTROL) & AGC_CAL_NF;
 154         }
 155
 156         /* return the AGC/Noise calibration state to the driver */
 157         return ret;
 158 }
 159
 160 #define EIGHTY_FLAG (CARL9170FW_PHY_HT_ENABLE | CARL9170FW_PHY_HT_DYN2040)
 161
 162 static uint32_t rf_init(const uint32_t delta_slope_coeff_exp,
 163                         const uint32_t delta_slope_coeff_man,
 164                         const uint32_t delta_slope_coeff_exp_shgi,
 165                         const uint32_t delta_slope_coeff_man_shgi,
 166                         const uint32_t finiteLoopCount,
 167                         const bool initialize)
 168 {
 169         uint32_t ret;
 170
 171         hw_turn_off_dyn(delta_slope_coeff_exp,
 172                         delta_slope_coeff_man,
 173                         delta_slope_coeff_exp_shgi,
 174                         delta_slope_coeff_man_shgi);
 175
 176         if (initialize) {
 177                 /* Real Chip */
 178                 program_ADDAC();
 179
 180                 /* inverse chain 0 <-> chain 2 */
 181                 set(AR9170_PHY_REG_ANALOG_SWAP, AR9170_PHY_ANALOG_SWAP_AB);
 182
 183                 /* swap chain 0 and chain 2 */
 184                 set(AR9170_PHY_REG_ANALOG_SWAP, AR9170_PHY_ANALOG_SWAP_AB |
 185                                                 AR9170_PHY_ANALOG_SWAP_ALT_CHAIN);
 186
 187                 /* Activate BB */
 188                 set(AR9170_PHY_REG_ACTIVE, AR9170_PHY_ACTIVE_EN);
 189                 delay(10);
 190         }
 191
 192         ret = AGC_calibration(finiteLoopCount);
 193
 194         set_channel_end();
 195         return ret;
 196 }
 197
 198 void rf_cmd(const struct carl9170_cmd *cmd, struct carl9170_rsp *resp)
 199 {
 200         uint32_t ret;
 201
 202         fw.phy.ht_settings = cmd->rf_init.ht_settings;
 203         fw.phy.frequency = cmd->rf_init.freq;
 204
 205         /*
 206          * Is the clock controlled by the PHY?
 207          */
 208         if ((fw.phy.ht_settings & EIGHTY_FLAG) == EIGHTY_FLAG)
 209                 clock_set(AHB_80_88MHZ, true);
 210         else
 211                 clock_set(AHB_40_44MHZ, true);
 212
 213         ret = rf_init(le32_to_cpu(cmd->rf_init.delta_slope_coeff_exp),
 214                       le32_to_cpu(cmd->rf_init.delta_slope_coeff_man),
 215                       le32_to_cpu(cmd->rf_init.delta_slope_coeff_exp_shgi),
 216                       le32_to_cpu(cmd->rf_init.delta_slope_coeff_man_shgi),
 217                       le32_to_cpu(cmd->rf_init.finiteLoopCount),
 218                       cmd->hdr.cmd == CARL9170_CMD_RF_INIT);
 219
 220         resp->hdr.len = sizeof(struct carl9170_rf_init_result);
 221         resp->rf_init_res.ret = cpu_to_le32(ret);
 222 }
 223
 224 void rf_psm(void)
 225 {
 226         u32 bank3;
 227
 228         if (fw.phy.psm.state == CARL9170_PSM_SOFTWARE) {
 229                 /* not enabled by the driver */
 230                 return;
 231         }
 232
 233         if (fw.phy.psm.state & CARL9170_PSM_SLEEP) {
 234                 fw.phy.psm.state &= ~CARL9170_PSM_SLEEP;
 235
 236                 /* disable all agc gain and offset updates to a2 */
 237                 set(AR9170_PHY_REG_TEST2, 0x8000000);
 238
 239                 /* power down ADDAC */
 240                 set(AR9170_PHY_REG_ADC_CTL,
 241                     AR9170_PHY_ADC_CTL_OFF_PWDDAC |
 242                     AR9170_PHY_ADC_CTL_OFF_PWDADC |
 243                     0xa0000000);
 244
 245                 /* Synthesizer off + RX off */
 246                 bank3 = 0x00400018;
 247
 248                 fw.phy.state = CARL9170_PHY_OFF;
 249         } else {
 250                 /* advance to the next PSM step */
 251                 fw.phy.psm.state--;
 252
 253                 if (fw.phy.psm.state == CARL9170_PSM_WAKE) {
 254                         /* wake up ADDAC */
 255                         set(AR9170_PHY_REG_ADC_CTL,
 256                             AR9170_PHY_ADC_CTL_OFF_PWDDAC |
 257                             AR9170_PHY_ADC_CTL_OFF_PWDADC);
 258
 259                         /* enable all agc gain and offset updates to a2 */
 260                         set(AR9170_PHY_REG_TEST2, 0x0);
 261
 262                         /* Synthesizer on + RX on */
 263                         bank3 = 0x01420098;
 264
 265                         fw.phy.state = CARL9170_PHY_ON;
 266                 } else {
 267                         return ;
 268                 }
 269         }
 270
 271         if (fw.phy.frequency < 3000000)
 272                 bank3 |= 0x00800000;
 273
 274         set(0x1c58f0, bank3);
 275 }
 276
 277 #endif /* CONFIG_CARL9170FW_RADIO_FUNCTIONS */