-# Test-suite makefile for opeb-adventure
+# Test-suite makefile for open-adventure
+
+# SPDX-FileCopyrightText: Copyright Eric S. Raymond <esr@thyrsus.com>
+# SPDX-License-Identifier: BSD-2-Clause
# Use absolute path so tests that change working directory still use
# scripts from parent directory. Note that using $PWD seems to fail
done
# Generate bogus savegames.
-sgame1:
+cheat_numdie.adv:
@$(PARDIR)/cheat -d -900 -o cheat_numdie.adv > /tmp/cheat_numdie
- @./outcheck.sh "cheat: Generate save file with -900 deaths"
-sgame2:
+cheat_numdie1000.adv:
@$(PARDIR)/cheat -d -1000 -o cheat_numdie1000.adv > /tmp/cheat_numdie1000
- @./outcheck.sh "cheat: Generate save file with -1000 deaths"
-sgame3:
+cheat_savetamper.adv:
@$(PARDIR)/cheat -d 2000 -o cheat_savetamper.adv > /tmp/cheat_savetamper
- @./outcheck.sh "cheat: Generate tamper-detection test"
-sgame4:
+resume_badversion.adv:
@$(PARDIR)/cheat -v -1337 -o resume_badversion.adv > /tmp/cheat_badversion
- @./outcheck.sh "cheat: Generate save file with version -1337"
-sgame5:
+thousand_saves.adv:
@$(PARDIR)/cheat -s -1000 -o thousand_saves.adv > /tmp/cheat_1000saves
- @./outcheck.sh "cheat: Generate save file 1000 saves"
-sgame6:
- @$(PARDIR)/cheat -t -1000 -o thousand_saves.adv > /tmp/cheat_1000turns
- @./outcheck.sh "cheat: Generate save file 1000 turns"
-sgame7:
- @$(PARDIR)/cheat -l -1000 -o thousand_lamp.adv > /tmp/cheat_1000lamp
- @./outcheck.sh "cheat: Generate save file 1000 turns"
-SGAMES = sgame1 sgame2 sgame3 sgame4 sgame5 sgame6 sgame7
+thousand_turns.adv:
+ @$(PARDIR)/cheat -t -1000 -o thousand_turns.adv > /tmp/cheat_1000turns
+thousand_limit.adv:
+ @$(PARDIR)/cheat -l -1000 -o thousand_limit.adv > /tmp/cheat_1000limit
+SGAMES = cheat_numdie.adv cheat_numdie1000.adv cheat_savetamper.adv resume_badversion.adv \
+ thousand_saves.adv thousand_turns.adv thousand_limit.adv
# Force coverage of cheat edgecases
scheck1:
@./outcheck.sh "test -r with valid input"
SCHECKS = scheck1 scheck2 scheck3 scheck4 scheck5 scheck6 scheck7
-# Don't run this from here, you'll get ctyptic warnings and no good result
-# if the advent binary wasn't built with covrage flags. Do "make clean covetage"
+# Don't run this from here, you'll get cryptic warnings and no good result
+# if the advent binary wasn't built with coverage flags. Do "make clean coverage"
# from the top-level directory.
coverage: check
lcov -t "advent" -o $(PARDIR)/advent.info -c -d $(PARDIR) --gcov-tool=$(GCOV)
OPTS=`sed -n /#options:/s///p <$${file}.log`; \
advent $$OPTS <$${file}.log >$${file}.chk 2>&1 || exit 1; \
done; \
- echo "inven" | advent isofoo.log /dev/stdin >multifile.chk; \
+ echo "inven" | advent issue36.log /dev/stdin >multifile.chk; \
rm -f scratch.tmp
RUN_TARGETS=$(TESTLOADS:%=run-regress-%)
$(RUN_TARGETS): run-regress-%: %.log
@(test=$(<:.log=); legend=$$(sed -n '/^## /s///p' <"$<" 2>/dev/null || echo "(no description)"); \
OPTS=`sed -n /#options:/s///p $<`; \
- $(advent) $$OPTS <$< | tapdiffer "$<: $${legend}" "$${test}.chk")
+ $(advent) $$OPTS <$< | tapdiffer "$${test}: $${legend}" "$${test}.chk")
multifile-regress:
- @(echo "inven" | advent isofoo.log /dev/stdin) | tapdiffer "multifile: multiple-file test" multifile.chk
+ @(echo "inven" | advent issue36.log /dev/stdin) | tapdiffer "multifile: multiple-file test" multifile.chk
-TEST_TARGETS = $(SGAMES) $(SCHECKS) $(RUN_TARGETS) multifile-regress
+TEST_TARGETS = $(SCHECKS) $(RUN_TARGETS) multifile-regress
-tap: count $(TEST_TARGETS)
+tap: count $(SGAMES) $(TEST_TARGETS)
@rm -f scratch.tmp /tmp/coverage* /tmp/cheat*
count:
@echo 1..$(words $(TEST_TARGETS))
# master leaving advent430 and adventure.data in place (make clean
# does not remove them).
#
+# make clean # Clean up object files, laving a bare source tree
+# git checkout advent430 # Check out the advent430 branch
+# make # Build the advent430 binary
+# advent430 # Run it. Answer the novice question and quit
+# make clean # Remove .o files
+# git checkout master # Go back to master branch
+# make # Rebuild advent.
+#
# The diff file produced has corrected spellings in it. That's what oldfilter
-# is for, to massage out the orioginal dpellings and avoid noise diffs.
+# is for, to massage out the original spellings and avoid noise diffs.
# Diffs in amount of whitespace and trailing whitespace are ignored
#
# A magic comment of NOCOMPARE in a log file excludes it from this comparison.
# making it a skipped test in the TAP view. First use of this was to avoid a
-# spurious mismatch on the news text. Other uses avoid spurios mismatches due
+# spurious mismatch on the news text. Other uses avoid spurious mismatches due
# to bug fixes.
#
# When adding more tests, bear in mind that any game that continues after a
# resurrection will need a NOCOMPARE. At some point in the forward port,
-# resurrection was accidentally changed in a way that messed wil the LCG chain.
+# resurrection was accidentally changed in a way that messed with the LCG chain.
+#
+# The *.chk files need not be up-to-date for this to work.
#
TAPFILTER=tapview
-ancient: $(SGAMES)
+oldcompare:
@if [ -f ../advent430 ]; then cp ../advent430 ../adventure.data .; else echo "advent430 nonexistent"; exit 1; fi
@-(for x in *.log; do \
stem=$${x%.log}; \
then echo "not ok - $${stem}.ochk: $${legend} # SKIP"; \
else \
./advent430 <$${stem}.log | oldfilter >$${stem}.ochk; \
- ./newfilter <$${stem}.chk | tapdiffer -w "$${stem}: $${legend}" $${stem}.ochk; \
+ ../advent <$${stem}.log >$${stem}.log-new; \
+ ./newfilter <$${stem}.log-new | tapdiffer -b "$${stem}: $${legend}" $${stem}.ochk; \
fi; \
done; \
echo 1..$(words $(shell ls *.log))) | $(TAPFILTER)
- @rm *.ochk advent430 adventure.data
+ @rm *.ochk *-new advent430 adventure.data
+
+# List all NOMPARE tests.
+residuals:
+ @grep -n NOCOMPARE *.log
# end
projects / open-adventure.git / blobdiff