#include "linenoise/linenoise.h"
#include "newdb.h"
-void* xmalloc(size_t size)
-{
- void* ptr = malloc(size);
- if (ptr == NULL)
- {
- fprintf(stderr, "Out of memory!\n");
- exit(EXIT_FAILURE);
- }
- return(ptr);
-}
-
char* xstrdup(const char* s)
{
char* ptr = strdup(s);
return word;
}
-void PUTTXT(token_t word, long *state, long casemake)
-/* Unpack the 30-bit value in word to obtain up to TOKLEN (currently
- * 5) integer-encoded chars, and store them in inline starting at
- * LNPOSN. If LNLENG>=LNPOSN, shift existing characters to the right
- * to make room. STATE will be zero when puttxt is called with the
- * first of a sequence of words, but is thereafter unchanged by the
- * caller, so PUTTXT can use it to maintain state across calls.
- * LNPOSN and LNLENG are incremented by the number of chars stored.
- * If CASEMAKE=1, all letters are made uppercase; if -1, lowercase; if 0,
- * as is. any other value for case is the same as 0 but also causes
- * trailing blanks to be included (in anticipation of subsequent
- * additional text). */
-{
- long alph1, alph2, byte, div, i, w;
-
- alph1=13*casemake+24;
- alph2=26*labs(casemake)+alph1;
- if (labs(casemake) > 1)
- alph1=alph2;
- /* alph1&2 define range of wrong-case chars, 11-36 or 37-62 or empty. */
- div=64L*64L*64L*64L;
- w=word;
- for (i=1; i<=TOKLEN; i++)
- {
- if (w <= 0 && *state == 0 && labs(casemake) <= 1)
- return;
- byte=w/div;
- w=(w-byte*div)*64;
- if (!(*state != 0 || byte != ascii_to_advent['%'])) {
- *state=ascii_to_advent['%'];
- continue;
- }
- SHFTXT(LNPOSN,1);
- *state=*state+byte;
- if (*state < alph2 && *state >= alph1)*state=*state-26*casemake;
- INLINE[LNPOSN]=*state;
- ++LNPOSN;
- *state=0;
- }
-}
-#define PUTTXT(WORD,STATE,CASE) fPUTTXT(WORD,&STATE,CASE)
-
-void SHFTXT(long from, long delta)
-/* Move INLINE(N) to INLINE(N+DELTA) for N=FROM,LNLENG. Delta can be
- * negative. LNLENG is updated; LNPOSN is not changed. */
-{
- long I, k, j;
-
- if (!(LNLENG < from || delta == 0)) {
- for (I=from; I<=LNLENG; I++) {
- k=I;
- if (delta > 0)
- k=from+LNLENG-I;
- j=k+delta;
- INLINE[j]=INLINE[k];
- }
- }
- LNLENG=LNLENG+delta;
-}
-
void TYPE0(void)
/* Type a blank line. This procedure is provided as a convenience for callers
* who otherwise have no use for MAPCOM. */
long i, val;
bool eof;
- /* Read a line of input, from the specified input source,
- * translate the chars to integers in the range 0-126 and store
- * them in the common array "INLINE". Integer values are as follows:
- * 0 = space [ASCII CODE 40 octal, 32 decimal]
- * 1-2 = !" [ASCII 41-42 octal, 33-34 decimal]
- * 3-10 = '()*+,-. [ASCII 47-56 octal, 39-46 decimal]
- * 11-36 = upper-case letters
- * 37-62 = lower-case letters
- * 63 = percent (%) [ASCII 45 octal, 37 decimal]
- * 64-73 = digits, 0 through 9
- * Remaining characters can be translated any way that is convenient;
- * The "TYPE" routine below is used to map them back to characters when
- * necessary. The above mappings are required so that certain special
- * characters are known to fit in 6 bits and/or can be easily spotted.
- * Array elements beyond the end of the line should be filled with 0,
- * and LNLENG should be set to the index of the last character.
+ /* Read a line of input, from the specified input source.
+ * This logic is complicated partly because it has to serve
+ * several cases with different requirements and partly because
+ * of a quirk in linenoise().
*
- * If the data file uses a character other than space (e.g., tab) to
- * separate numbers, that character should also translate to 0.
+ * The quirk shows up when you paste a test log from the clipboard
+ * to the program's command prompt. While fgets (as expected)
+ * consumes it a line at a time, linenoise() returns the first
+ * line and discards the rest. Thus, there needs to be an
+ * editline (-s) option to fall back to fgets while still
+ * prompting. Note that linenoise does behave properly when
+ * fed redirected stdin.
*
- * This procedure may use the map1,map2 arrays to maintain static data for
- * the mapping. MAP2(1) is set to 0 when the program starts
- * and is not changed thereafter unless the routines on this page choose
- * to do so. */
-
- if (prompt)
- fputs("> ", stdout);
+ * The logging is a bit of a mess because there are two distinct cases
+ * in which you want to echo commands. One is when shipping them to
+ * a log under the -l option, in which case you want to suppress
+ * prompt generation (so test logs are unadorned command sequences).
+ * On the other hand, if you redirected stdin and are feeding the program
+ * a logfile, you *do* want prompt generation - it makes checkfiles
+ * easier to read when the commands are marked by a preceding prompt.
+ */
do {
if (!editline) {
+ if (prompt)
+ fputs("> ", stdout);
IGNORE(fgets(rawbuf,sizeof(rawbuf)-1,fp));
eof = (feof(fp));
} else {
- char *cp = linenoise(prompt ? "> ": "");
+ char *cp = linenoise("> ");
eof = (cp == NULL);
if (!eof) {
strncpy(rawbuf, cp, sizeof(rawbuf)-1);
fclose(logfp);
return false;
} else {
+ FILE *efp = NULL;
if (logfp && fp == stdin)
- IGNORE(fputs(rawbuf, logfp));
+ efp = logfp;
else if (!isatty(0))
- IGNORE(fputs(rawbuf, stdout));
+ efp = stdout;
+ if (efp != NULL)
+ {
+ if (prompt && efp == stdout)
+ fputs("> ", efp);
+ IGNORE(fputs(rawbuf, efp));
+ }
strcpy(INLINE+1, rawbuf);
+ /* translate the chars to integers in the range 0-126 and store
+ * them in the common array "INLINE". Integer values are as follows:
+ * 0 = space [ASCII CODE 40 octal, 32 decimal]
+ * 1-2 = !" [ASCII 41-42 octal, 33-34 decimal]
+ * 3-10 = '()*+,-. [ASCII 47-56 octal, 39-46 decimal]
+ * 11-36 = upper-case letters
+ * 37-62 = lower-case letters
+ * 63 = percent (%) [ASCII 45 octal, 37 decimal]
+ * 64-73 = digits, 0 through 9
+ * Remaining characters can be translated any way that is convenient;
+ * The "TYPE" routine below is used to map them back to characters when
+ * necessary. The above mappings are required so that certain special
+ * characters are known to fit in 6 bits and/or can be easily spotted.
+ * Array elements beyond the end of the line should be filled with 0,
+ * and LNLENG should be set to the index of the last character.
+ *
+ * If the data file uses a character other than space (e.g., tab) to
+ * separate numbers, that character should also translate to 0.
+ *
+ * This procedure may use the map1,map2 arrays to maintain static data for
+ * the mapping. MAP2(1) is set to 0 when the program starts
+ * and is not changed thereafter unless the routines on this page choose
+ * to do so. */
LNLENG=0;
for (i=1; i<=(long)sizeof(INLINE) && INLINE[i]!=0; i++) {
val=INLINE[i];
projects / open-adventure.git / blobdiff