+% The Muddle Programming Language
+% Greg Pfister
+ S. W. Galley
+ et al.
+% 1979
+
MIT Technical Report 293
Laboratory for Computer Science\
Abstract
========
-The Muddle programming language began existence in late 1970 (under
-the name Muddle) as a successor to Lisp (Moon, 1974), a candidate
-vehicle for the Dynamic Modeling System, and a possible base for
-implementation of Planner (Hewitt, 1969). The original design goals
-included an interactive integrated environment for programming,
-debugging, loading, and editing: ease in learning and use; facilities
-for structured, modular, shared programs; extensibility of syntax,
-data types and operators: data-type checking for debugging and
-optional data-type declarations for compiled efficiency; associative
-storage, coroutining, and graphics. Along the way to reaching those
-goals, it developed flexible input/output (including the ARPA
-Network), and flexible interrupt and signal handling. It now serves as
-a base for software prototyping, research, development, education, and
-implementation of the majority of programs at MIT-DMS: a library of
-sharable modules, a coherent user interface, special research
+The Muddle programming language began existence in late 1970 as a
+successor to Lisp (Moon, 1974), a candidate vehicle for the Dynamic
+Modeling System, and a possible base for implementation of Planner
+(Hewitt, 1969). The original design goals included an interactive
+integrated environment for programming, debugging, loading, and
+editing: ease in learning and use; facilities for structured,
+modular, shared programs; extensibility of syntax, data types and
+operators: data-type checking for debugging and optional data-type
+declarations for compiled efficiency; associative storage,
+coroutining, and graphics. Along the way to reaching those goals, it
+developed flexible input/output (including the ARPA Network), and
+flexible interrupt and signal handling. It now serves as a base for
+software prototyping, research, development, education, and
+implementation of the majority of programs at MIT-DMS: a library of
+sharable modules, a coherent user interface, special research
projects, autonomous daemons, etc.
This document was originally intended to be a simple low-level
There are no "practice problems"; you are assumed to be learning
Muddle for some purpose, and your work in achieving that purpose will
-be more useful and motivated than artificial problems. In several
+be more useful and motivating than artificial problems. In several
cases, the examples contain illustrations of important points which
-are not covered in the text. Ignore examples as your peril.
+are not covered in the text. Ignore examples at your peril.
This document does not assume knowledge of any specific programming
-language on the \[sic\] your part. However, "computational literacy"
-is assumed: you should have written at least one program before. Also
-very little familiarity is assumed with the interactive time-sharing
-operating systems under which Muddle runs -- ITS, Tenex, and Tops-20
--- namely just file and user naming conventions.
+language on your part. However, "computational literacy" is assumed:
+you should have written at least one program before. Also very little
+familiarity is assumed with the interactive time-sharing operating
+systems under which Muddle runs -- ITS, Tenex, and Tops-20 -- namely
+just file and user naming conventions.
### Notation
-------------------------
First, catch your rabbit. Somehow get the interpreter running -- the
-program in the file `SYS:TS.Muddle` in the ITS version or
-`SYS:Muddle.SAV` in the Tenex version or `SYS:Muddle.EXE` in the
+program in the file `SYS:TS MDL` in the ITS version or
+`SYS:MDL.SAV` in the Tenex version or `SYS:MDL.EXE` in the
Tops-20 version. The interpreter will first type out some news
relating to Muddle, if any, then type
IMLAC, ARDS, Datapoint), it firsts clears the screen.
Typing `^G` (`CTRL`+`G`) causes Muddle to stop whatever it is doing
-and act as if an error had occurred ([section
-1.4](#14-errors-simple-considerations-1)). `^G` is generally most
-useful for temporary interruptions to check the progress of a
+and act as if an error had occurred (section 1.4). `^G` is generally
+most useful for temporary interruptions to check the progress of a
computation. `^G` is "reversible" -- that is, it does not destroy any
of the "state" of the computation it interrupts. To "undo" a `^G`,
type the characters
(This is discussed more fully far below, in section 16.4.)
Typing `^S` (`CTRL`+`S`) causes Muddle to **throw away** what it is
-currently doing and return a normal "listening" state. (In the Tenex
-and Tops-20 versions, `^O` also should have the same effect.) `^S` is
-generally most useful for aborting infinite loops and similar terrible
-things. `^S` **destroys** whatever is going on, and so it is **not**
-reversible.
+currently doing and return to a normal "listening" state. (In the
+Tenex and Tops-20 versions, `^O` also should have the same effect.)
+`^S` is generally most useful for aborting infinite loops and similar
+terrible things. `^S` **destroys** whatever is going on, and so it is
+**not** reversible.
Most expressions in Muddle include "brackets" (generically meant) that
must be correctly paired and nested. If you end your typing with the
One way to "name" a `FUNCTION` is
<SETG SQUARE #FUNCTION ((X) <* .X .X>)>$
- #FUNCTION ((X) <* .X .X>
+ #FUNCTION ((X) <* .X .X>)
So that
Another way, which is somewhat cleaner in its typing:
<SETG SQUARE <FUNCTION (X) <* .X .X>>>$
- #FUNCTION ((X) <* .X .X>
+ #FUNCTION ((X) <* .X .X>)
`FUNCTION` is an `FSUBR` which simply makes a `FUNCTION` out of its
arguments and returns the created `FUNCTION`.
The following table tells which `SUBR`s can be used with which modes,
where `OK` indicates an allowed use:
- -------------------------------------------------------------------------------------------------------------------------------------------------
- "READ" "PRINT" "READB" "PRINTB", "PRINTO" mode / SUBRs
- -------------------- --------------------- --------------------- -------------------------------------------- -----------------------------------
- OK OK `READ` `READCHR` `NEXTCHR`
- `READSTRING` `FILECOPY`
- `FILE-LENGTH LOAD`
+ -------------------------------------------------------------------------
+ "READ" "PRINT" "READB" "PRINTB", "PRINTO" mode / SUBRs
+ ------ ------- ------- ------------------ ------------
+ OK OK `READ` `READCHR` `NEXTCHR`
+ `READSTRING` `FILECOPY`
+ `FILE-LENGTH LOAD`
- OK OK\* `PRINT` `PRIN1` `PRINC` `IMAGE`
- `CRLF` `TERPRI` `FILECOPY`
- `PRINTSTRING` `BUFOUT` `NETS`
- `RENAME`
+ OK OK\* `PRINT` `PRIN1` `PRINC` `IMAGE`
+ `CRLF` `TERPRI` `FILECOPY`
+ `PRINTSTRING` `BUFOUT` `NETS`
+ `RENAME`
- OK `READB` `GC-READ`
+ OK `READB` `GC-READ`
- OK `PRINTB` `GC-DUMP`
+ OK `PRINTB` `GC-DUMP`
- OK OK OK `ACCESS`
+ OK OK OK `ACCESS`
- OK OK OK OK `RESET`
+ OK OK OK OK `RESET`
- OK OK `ECHOPAIR`
+ OK OK `ECHOPAIR`
- OK `TTYECHO` `TYI`
- -------------------------------------------------------------------------------------------------------------------------------------------------
+ OK `TTYECHO` `TYI`
+ -------------------------------------------------------------------------
`*` PRINTing (or `PRIN1`ing) an `RSUBR` (chapter 19) on a `"PRINTB"`
or `"PRINTO"` `CHANNEL` has special effects.
*element-number: type interpretation*
- ----------------------------------------------------------------------------------------------------
- element-number type interpretation
- -------------------------- ------------------ ------------------------------------------------------
- -1 `LIST` transcript channel(s) (see below)
+ -------------------------------------------------------------------------------------
+ element-number type interpretation
+ ---------------- ------------- ------------------------------------------------------
+ -1 `LIST` transcript channel(s) (see below)
- \* 0 varies device-dependent information
+ \* 0 varies device-dependent information
- \* 1 `FIX` channel number (ITS) or JFN (Tenex and Tops-20), `0`
- for internal or closed
+ \* 1 `FIX` channel number (ITS) or JFN (Tenex and Tops-20), `0`
+ for internal or closed
- \* 2 `STRING` mode
+ \* 2 `STRING` mode
- \* 3 `STRING` first file name argument
+ \* 3 `STRING` first file name argument
- \* 4 `STRING` second file name argument
+ \* 4 `STRING` second file name argument
- \* 5 `STRING` device name argument
+ \* 5 `STRING` device name argument
- \* 6 `STRING` directory name argument
+ \* 6 `STRING` directory name argument
- \* 7 `STRING` real first file name
+ \* 7 `STRING` real first file name
- \* 8 `STRING` real second file name
+ \* 8 `STRING` real second file name
- \* 9 `STRING` real device name
+ \* 9 `STRING` real device name
- \* 10 `STRING` real directory name
+ \* 10 `STRING` real directory name
- \* 11 `FIX` various status bits
+ \* 11 `FIX` various status bits
- \* 12 `FIX` PDP-10 instruction used to do one I/O operation
+ \* 12 `FIX` PDP-10 instruction used to do one I/O operation
- 13 `FIX` number of characters per line of output
+ 13 `FIX` number of characters per line of output
- 14 `FIX` current character position on a line
+ 14 `FIX` current character position on a line
- 15 `FIX` number of lines per page
+ 15 `FIX` number of lines per page
- 16 `FIX` current line number on a page
+ 16 `FIX` current line number on a page
- 17 `FIX` access pointer for file-oriented devices
+ 17 `FIX` access pointer for file-oriented devices
- 18 `FIX` radix for `FIX` conversion
+ 18 `FIX` radix for `FIX` conversion
- 19 `FIX` sink for an internal `CHANNEL`
- ----------------------------------------------------------------------------------------------------
+ 19 `FIX` sink for an internal `CHANNEL`
+ -------------------------------------------------------------------------------------
N.B.: The elements of a `CHANNEL` below number 1 are usually invisible
but are obtainable via `<NTH <TOP channel> fix>`, for some appropriate
projects / mudman.git / blobdiff