everything. You may not necessarily want everything though and can
also specify targets to make. For example:
- make av7110
+ make av7110
Please see the included Makefile for a list of all available targets.
the appropriate place, which is /lib/firmware by default although you
can override this with something like:
- make prefix=/desired/path install
+ make prefix=/desired/path install
-In order to build everything you will need the following on the host
+In order to build everything you will need the following on the host
system:
- * A C compiler, like GCC
- * Cmake
- * GNU Bison/YACC
- * GNU Flex
- * GNU Gperf
- * GNU Make
- * GNU Wget
- * GNU C cross-compiler for ARM:
- - arm-linux-gnueabi-gcc
- - arm-linux-gnueabi-ld
- - arm-linux-gnueabi-objcopy
+
+ * A C/C++ compiler, like GCC
+ * Cmake
+ * dfu-util - Device Firmware Upgrade Utilities
+ * GNU Bison/YACC
+ * GNU Flex
+ * GNU Gperf
+ * GNU Make
+ * GNU Wget
+ * GNU C cross-compiler for AVR
+ * Standard C library for Atmel AVR
+ * GNU C cross-compiler for ARM:
+ - arm-linux-gnueabi-gcc
+ - arm-linux-gnueabi-ld
+ - arm-linux-gnueabi-objcopy
+ - arm-none-eabi-gcc
+ - arm-none-eabi-objcopy
+ - arm-none-eabi-as
+
+On GNU/Linux distros that use apt you can install these with:
+
+ apt install gcc-avr avr-libc binutils-arm-linux-gnueabi \
+ binutils-arm-none-eabi bison cmake dfu-util flex g++ gcc \
+ gcc-arm-linux-gnueabi gcc-arm-none-eabi gperf make wget
CARL9170 Firmware Configuration
+-------------------------------
When building the carl9170 firmware you will be prompted with
configuration questions.
------
-Copyright (C) 2017 Jason Self <j@jxself.org>
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved. This file is offered as-is,
-without any warranty.
+atusb: Firmware for the ATUSB IEEE 802.15.4 USB Adapter
+-------------------------------------------------------
+
+To flash the firmware you need dfu-util on the host. Issue
+
+ dfu-util -d 20b7:1540 -D atusb.dfu
+
+right after plugging the device into the USB port while the red led is
+still on.
+
+Refer to the included README file for more information.
+
+Licensing
+---------
+
+You can redistribute and/or modify this file under the terms of the
+GNU General Public License as published by the Free Software
+Foundation, either version 3 of the License, or (at your option) any
+later version.
\ No newline at end of file