fwcutter/make: Avoid _DEFAULT_SOURCE warning

[b43-tools.git] / assembler / README

diff --git a/assembler/README b/assembler/README
index 665880365d1f99763921d0c4c9f32e2f03c1f4a4..fe8e12e83f120323e267c79aeb7ca45755e5f1c4 100644 (file)
--- a/assembler/README
+++ b/assembler/README
@@ -16,9 +16,10 @@ sub       | A,B,rD     | Subtract                        | rD=A-B
 sub.      | A,B,rD     | Sub, set Carry                  | rD=A-B SaveCarry
 subc      | A,B,rD     | Sub with Carry                  | rD=A-B-Carry
 subc.     | A,B,rD     | Sub with Carry, set Carry       | rD=A-B-C SaveCarry
+mul       | A,B,rD     | multiply (rev 11+ only)         | spr06d=lsb; rD=msb
 
 Branch instructions:
-jmp       | l          | Unconditional jump              | PC=l
+jmp       | l          | Uncond. jump (virtual instr.)   | PC=l
 jand      | A,B,l      | Jump if binary AND              | if(A&B) PC=l
 jnand     | A,B,l      | Jump if not binary AND          | if(!(A&B)) PC=l
 js        | A,B,l      | Jump if all bits set            | if((A&B)==A) PC=l
@@ -33,15 +34,21 @@ jl        | A,B,l      | Jump if less                    | if(A<B) PC=l
 jge       | A,B,l      | Jump if greater or equal        | if(A>=B) PC=l
 jg        | A,B,l      | Jump if greater                 | if(A>B) PC=l
 jle       | A,B,l      | Jump if less or equal           | if(A<=B) PC=l
+jdn       | A,B,l      | Jump if diff is < 0, no carry   | if(nc(A-B)<0) PC=l
+jdpz      | A,B,l      | Jump if diff is >= 0, no carry  | if(nc(A-B)>=0) PC=l
+jdp       | A,B,l      | Jump if diff is > 0, no carry   | if(nc(A-B)>0) PC=l
+jdnz      | A,B,l      | Jump if diff is <= 0, no carry  | if(nc(A-B)<=0) PC=l
 call      | lrX,l      | Store PC, call function         | lrX=PC; PC=l
+calls     | l          | Store PC, call function         | PC->stack; PC=l
 ret       | lrX,lrY    | Store PC, ret from func         | lrX=PC; PC=lrY
+rets      |            | ret from function               | stack->PC
 jzx       | M,S,A,B,l  | Jump if zero after shift + mask |
 jnzx      | M,S,A,B,l  | Jump if nonzero after shift+msk |
 jext      | E,A,B,l    | Jump if External Condition true | if(E) PC=l
 jnext     | E,A,B,l    | Jump if External Condition false| if(!E) PC=l
 
 Data transfer instructions:
-mov       | A,rD       | Copy data                       | rD=A
+mov       | A,rD       | Copy data (virtual instruction) | rD=A
 tkiph     | A,rD       | TKIP S-Box lookup high          | rD=SBOX[hi8(A)]
 tkiphs    | A,rD       | TKIP S-Box lkup hi swap'd       | rD=byteswap(tkiph)
 tkipl     | A,rD       | TKIP S-Box lookup low           | rD=SBOX[lo8(A)]
@@ -54,14 +61,14 @@ and       | A,B,rD     | Bitwise AND                     | rD=A&B
 xor       | A,B,rD     | Bitwise XOR                     | rD=A^B
 sr        | A,B,rD     | Rightshift                      | rD=A>>B
 sl        | A,B,rD     | Leftshift                       | rD=A<<B
-srx       | M,S,A,B,rD | Extended right shift            |
+srx       | M,S,A,B,rD | Shift right over two registers  | See detailed docs
 rl        | A,B,rD     | Rotate left                     | rD=lrot(A, B bits)
 rr        | A,B,rD     | Rotate right                    | rD=rrot(A, B bits)
 nand      | A,B,rD     | Clear bits (notmask+and)        | rD=A&(~B)
-orx       | M,S,A,B,rD | Extended bitwise OR             |
+orx       | M,S,A,B,rD | OR with shift and select        | See detailed docs
 
 Other instructions:
-nap       | none       | Sleep until event               |
+nap       | none       | Sleep until event               | See detailed docs
 
 
 
@@ -81,3 +88,12 @@ lrY  = Link Register (lr0 - lr3)
 Raw instruction format:
 @bitcode_in_hexadecimal
 Example: @1C0 @C11,@C22,r3
+
+
+Virtual instructions are translated by the assembler to other
+lowlevel instructions.
+
+
+Please also see the detailed microcode documentation at:
+http://bcm-v4.sipsolutions.net/802.11/Microcode
+