1 Briefly, running "make" without specifying any targets will build
2 everything. You may not necessarily want everything though and can
3 also specify targets to make. For example:
7 Please see the included Makefile for a list of all available targets.
9 Once the desired things are built, "make install" will put them into
10 the appropriate place, which is /lib/firmware by default although you
11 can override this with something like:
13 make prefix=/desired/path install
15 In order to build everything you will need the following on the host
18 * A C/C++ compiler, like GCC
25 * GNU C cross-compiler for AVR
26 * Standard C library for Atmel AVR
27 * GNU C cross-compiler for ARM:
28 - arm-linux-gnueabi-gcc
29 - arm-linux-gnueabi-ld
30 - arm-linux-gnueabi-objcopy
32 - arm-none-eabi-objcopy
35 On GNU/Linux distros that use apt you can install these with:
37 apt install gcc-avr avr-libc binutils-arm-linux-gnueabi \
38 binutils-arm-none-eabi bison cmake flex g++ gcc \
39 gcc-arm-linux-gnueabi gcc-arm-none-eabi gperf make wget
41 CARL9170 Firmware Configuration
42 -------------------------------
43 When building the carl9170 firmware you will be prompted with
44 configuration questions.
46 atusb: Firmware for the ATUSB IEEE 802.15.4 USB Adapter
47 -------------------------------------------------------
49 To flash the firmware you need dfu-util on the host. Issue
53 right after plugging the device into the USB port while the red led is
56 Refer to the included README file for more information.
61 You can redistribute and/or modify this file under the terms of the
62 GNU General Public License as published by the Free Software
63 Foundation, either version 3 of the License, or (at your option) any