hif/usb_api: remove dup code - usb_reg_out_patch

[open-ath9k-htc-firmware.git] / target_firmware / magpie_fw_dev / target / rompatch / usb_api_patch.c

diff --git a/target_firmware/magpie_fw_dev/target/rompatch/usb_api_patch.c b/target_firmware/magpie_fw_dev/target/rompatch/usb_api_patch.c
index 542a715dbe021e77c53fdae41f12102a07bce498..d952c7caa34f6a54a4ddef4759aabeaf3f6cd036 100755 (executable)
--- a/target_firmware/magpie_fw_dev/target/rompatch/usb_api_patch.c
+++ b/target_firmware/magpie_fw_dev/target/rompatch/usb_api_patch.c
@@ -118,96 +118,6 @@ void _fw_usbfifo_init(USB_FIFO_CONFIG *pConfig)
        usbFifoConf.send_event_done = pConfig->send_event_done;
 }
 
-/*
- * -- support more than 64 bytes command on ep4 -- 
- */
-void vUsb_Reg_Out_patch(void)
-{   
-       uint16_t usbfifolen;
-       uint16_t ii;
-       uint32_t ep4_data;
-       static volatile uint32_t *regaddr;
-       static uint16_t cmdLen;
-       static VBUF *buf;
-       BOOLEAN cmd_is_last = FALSE;
-       static BOOLEAN cmd_is_new = TRUE;
-
-       // get the size of this transcation
-       usbfifolen = USB_BYTE_REG_READ(ZM_EP4_BYTE_COUNT_LOW_OFFSET);
-
-       // check is command is new
-       if( cmd_is_new ){
-
-               buf = usbFifoConf.get_command_buf();
-               cmdLen = 0;
-
-               if( !buf )
-                       goto ERR;
-
-               // copy free, assignment buffer of the address
-               regaddr = (uint32_t *)buf->desc_list->buf_addr;
-
-               cmd_is_new = FALSE;
-       }
-
-       // just in case, suppose should not happen
-       if( !buf )
-               goto ERR;
-
-       // if size is smaller, this is the last command!
-       // zero-length supposed should be set through 0x27/bit7->0x19/bit4, not here
-       if( usbfifolen<64 ) {
-               cmd_is_last = TRUE;
-       }
-
-       // accumulate the size
-       cmdLen += usbfifolen;
-
-       // round it to alignment
-       if(usbfifolen % 4)
-               usbfifolen = (usbfifolen >> 2) + 1;
-       else
-               usbfifolen = usbfifolen >> 2;
-
-       // retrieve the data from fifo
-       for(ii = 0; ii < usbfifolen; ii++)
-       {
-               ep4_data = USB_WORD_REG_READ(ZM_EP4_DATA_OFFSET);   // read fifo data out
-               *regaddr = ep4_data;
-               regaddr++;
-       }
-
-       // if this is the last command, callback to HTC
-       if (  cmd_is_last  )
-       {
-               buf->desc_list->next_desc = NULL;
-               buf->desc_list->data_offset = 0;
-               buf->desc_list->data_size = cmdLen;
-               buf->desc_list->control = 0;
-               buf->next_buf = NULL;
-               buf->buf_length = cmdLen;
-
-               usbFifoConf.recv_command(buf);
-
-               cmd_is_new = TRUE;
-       }
-
-       goto DONE;
-ERR:
-       //    we might get no command buffer here?
-       //    but if we return here, the ep4 fifo will be lock out,
-       //    so that we still read them out but just drop it ?
-       for(ii = 0; ii < usbfifolen; ii++)
-       {
-               ep4_data = USB_WORD_REG_READ(ZM_EP4_DATA_OFFSET);   // read fifo data out
-       }
-
-DONE:
-       //mUSB_STATUS_IN_INT_ENABLE();
-       ;
-}
-
-
 /* 
  *  -- usb1.1 ep6 fix --
  */