hif/usb_api: remove dup code - bGet_descriptor_patch

[open-ath9k-htc-firmware.git] / target_firmware / magpie_fw_dev / target / hif / k2_fw_usb_api.c

diff --git a/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c b/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c
index e954539c6be2ef1bde05d82a43329f91936067d7..395aaa9f18a226dab247fd592e6528a249e54cf6 100755 (executable)
--- a/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c
+++ b/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c
@@ -401,201 +401,4 @@ void _fw_usb_reset_fifo(void)
     HAL_WORD_REG_WRITE(0x50040, (0x200|0|(1>>1)<<12));
     A_UART_HWINIT((22*1000*1000), 19200);
 }
-
-/* 
- *  -- usb1.1 ep6 fix --
- */
-extern uint16_t       u8UsbConfigValue;
-extern uint16_t       u8UsbInterfaceValue;
-extern uint16_t       u8UsbInterfaceAlternateSetting;
-extern SetupPacket    ControlCmd;
-extern void vUsbClrEPx(void);
-
-void vUSBFIFO_EP6Cfg_FS_patch(void)
-{
-#if (FS_C1_I0_A0_EP_NUMBER >= 6)
-    int i;
-
-    //EP0X06
-    mUsbEPMap(EP6, FS_C1_I0_A0_EP6_MAP);
-    mUsbFIFOMap(FS_C1_I0_A0_EP6_FIFO_START, FS_C1_I0_A0_EP6_FIFO_MAP);
-    mUsbFIFOConfig(FS_C1_I0_A0_EP6_FIFO_START, FS_C1_I0_A0_EP6_FIFO_CONFIG);
-
-    for(i = FS_C1_I0_A0_EP6_FIFO_START + 1 ;
-        i < FS_C1_I0_A0_EP6_FIFO_START + FS_C1_I0_A0_EP6_FIFO_NO ; i ++)
-    {
-        mUsbFIFOConfig(i, (FS_C1_I0_A0_EP6_FIFO_CONFIG & (~BIT7)) );
-    }
-                            
-    mUsbEPMxPtSzHigh(EP6, FS_C1_I0_A0_EP6_DIRECTION, (FS_C1_I0_A0_EP6_MAX_PACKET & 0x7ff));
-    mUsbEPMxPtSzLow(EP6, FS_C1_I0_A0_EP6_DIRECTION, (FS_C1_I0_A0_EP6_MAX_PACKET & 0x7ff));
-    mUsbEPinHighBandSet(EP6 , FS_C1_I0_A0_EP6_DIRECTION, FS_C1_I0_A0_EP6_MAX_PACKET);
 #endif
-}
-
-void vUsbFIFO_EPxCfg_FS_patch(void)
-{
-    switch (u8UsbConfigValue)
-    {
-        #if (FS_CONFIGURATION_NUMBER >= 1)
-        // Configuration 0X01
-        case 0X01:
-            switch (u8UsbInterfaceValue)
-            {
-                #if (FS_C1_INTERFACE_NUMBER >= 1)
-                // Interface 0
-                case 0:
-                    switch (u8UsbInterfaceAlternateSetting)
-                    {
-
-                        #if (FS_C1_I0_ALT_NUMBER >= 1)
-                        // AlternateSetting 0
-                        case 0:
-
-                                                       // snapped....
-
-                                                       // patch up this ep6_fs config
-                            vUSBFIFO_EP6Cfg_FS_patch();
-
-                            break;
-
-                        #endif
-                        default:
-                            break;
-                    }
-                    break;
-                #endif
-                default:
-                    break;
-            }
-            break;
-        #endif
-        default:
-            break;
-    }
-    //mCHECK_STACK();
-}
-
-
-BOOLEAN bSet_configuration_patch(void)
-{
-    //A_PRINTF("bSet_configuration...\n\r");
-
-       bSet_configuration();
-
-    if (mLOW_BYTE(mDEV_REQ_VALUE()) == 0)
-    {
-               // snapped....
-               ;
-    }
-    else
-    {
-        if (mUsbHighSpeedST())                  // First judge HS or FS??
-        {
-                       // snapped....
-                       ;
-        }
-        else
-        {
-                       // snapped....
-                       vUsbFIFO_EPxCfg_FS_patch();
-        }
-           
-               // snapped....
-    }
-
-    eUsbCxFinishAction = ACT_DONE;
-    return TRUE;
-}
-
-extern uint16_t *u8UsbDeviceDescriptor;
-extern uint16_t *u8ConfigDescriptorEX;
-extern uint16_t *pu8DescriptorEX;
-extern uint16_t u16TxRxCounter;
-extern BOOLEAN bGet_descriptor(void);
-
-uint16_t DeviceDescriptorPatch[9];
-uint16_t ConfigDescriptorPatch[30];
-
-
-#define BCD_DEVICE                 6
-#define BCD_DEVICE_FW_SIGNATURE            0xffff
-#define EP3_TRANSFER_TYPE_OFFSET    17
-#define EP3_INT_INTERVAL            19
-#define EP4_TRANSFER_TYPE_OFFSET    21
-#define EP4_INT_INTERVAL            22
-
-BOOLEAN bGet_descriptor_patch(void)
-{
-    int i;
-    switch (mDEV_REQ_VALUE_HIGH()) {
-    case 1:
-        ath_hal_memcpy(DeviceDescriptorPatch,
-            u8UsbDeviceDescriptor, sizeof(DeviceDescriptorPatch));
-
-        DeviceDescriptorPatch[BCD_DEVICE] = BCD_DEVICE_FW_SIGNATURE;
-
-        pu8DescriptorEX = DeviceDescriptorPatch;
-        u16TxRxCounter = mTABLE_LEN(DeviceDescriptorPatch[0]);
-        break;
-    case 2:
-        /* Copy ConfigDescriptor */
-       ath_hal_memcpy(ConfigDescriptorPatch,
-            u8ConfigDescriptorEX, sizeof(ConfigDescriptorPatch));
-
-       /* place holder for EPx patches */
-
-        switch (mDEV_REQ_VALUE_LOW())
-        {
-        case 0x00:      // configuration no: 0
-            pu8DescriptorEX = ConfigDescriptorPatch;
-            u16TxRxCounter = ConfigDescriptorPatch[1];
-            //u16TxRxCounter = 46;
-            break;
-        default:
-            return FALSE;
-        }
-        break;
-    default:
-        return bGet_descriptor();
-    }
-
-    if (u16TxRxCounter > mDEV_REQ_LENGTH())
-        u16TxRxCounter = mDEV_REQ_LENGTH();
-
-    A_USB_EP0_TX_DATA();
-    return TRUE;
-}
-
-extern BOOLEAN bStandardCommand(void);
-
-BOOLEAN bStandardCommand_patch(void)
-{
-    if (mDEV_REQ_REQ() == USB_SET_CONFIGURATION) {
-        A_USB_SET_CONFIG();
-
-#if ENABLE_SWAP_DATA_MODE
-        // SWAP FUNCTION should be enabled while DMA engine is not working,
-        // the best place to enable it is before we trigger the DMA
-        MAGPIE_REG_USB_RX0_SWAP_DATA = 0x1;
-        MAGPIE_REG_USB_TX0_SWAP_DATA = 0x1;
-
-        #if SYSTEM_MODULE_HP_EP5
-            MAGPIE_REG_USB_RX1_SWAP_DATA = 0x1;
-        #endif
-
-        #if SYSTEM_MODULE_HP_EP6
-            MAGPIE_REG_USB_RX2_SWAP_DATA = 0x1;
-        #endif
-
-#endif //ENABLE_SWAP_DATA_MODE
-        return TRUE;
-    }
-    else {
-        return bStandardCommand();
-    }
-}
-
-#endif
-
-