dbg_api.c: use new io funcs

[open-ath9k-htc-firmware.git] / target_firmware / magpie_fw_dev / target / cmnos / dbg_api.c

diff --git a/target_firmware/magpie_fw_dev/target/cmnos/dbg_api.c b/target_firmware/magpie_fw_dev/target/cmnos/dbg_api.c
index e5b06c431844491d6661fb5371b6b1f33d5575a3..451059bd0e19592679757a242e76d49dc1758396 100755 (executable)
--- a/target_firmware/magpie_fw_dev/target/cmnos/dbg_api.c
+++ b/target_firmware/magpie_fw_dev/target/cmnos/dbg_api.c
@@ -35,6 +35,8 @@
 #include "sys_cfg.h"
 #include "athos_api.h"
 
+#include "adf_os_io.h"
+
 #if defined(PROJECT_K2)
 #if SYSTEM_MODULE_SFLASH
 #include "sflash_api.h"
@@ -455,12 +457,12 @@ static int db_ldr_cmd(char *cmd, char *param1, char *param2, char *param3)
                        addr &= 0xfffffffc;
                        //val = *(unsigned long *)addr;
 
-                       val = HAL_WORD_REG_READ(addr);
+                       val = ioread32(addr);
                }
                else if (strcmp(cmd, "LDRH") == 0)
                {
                        addr &= 0xfffffffe;
-                       val = HAL_HALF_WORD_REG_READ(addr);
+                       val = ioread16(addr);
                }
                else if (strcmp(cmd, "LDRB") == 0)
                {
@@ -491,23 +493,21 @@ static int db_str_cmd(char *cmd, char *param1, char *param2, char *param3)
                if (strcmp(cmd, "STR") == 0)
                {
                        addr &= 0xfffffffc;
-                       //HAL_WORD_REG_WRITE(addr, val);
-                       HAL_WORD_REG_WRITE(addr, val);
-                       //*(volatile unsigned long *)(addr & 0xfffffffc) = (unsigned long)val;
+                       iowrite32(addr, val);
                }
 
                else if (strcmp(cmd, "STRH") == 0)
                {
                        addr &= 0xfffffffe;
                        //*(volatile unsigned short *)(addr & 0xfffffffe) = (unsigned short)val;
-                       HAL_HALF_WORD_REG_WRITE(addr, val);
+                       iowrite16(addr, val);
                }
                else if (strcmp(cmd, "STRB") == 0)
                {
                        if( addr & 0x00f00000 )
-                               HAL_BYTE_REG_WRITE(addr, val);
+                               iowrite8(addr, val);
                        else
-                               HAL_BYTE_REG_WRITE(addr^3, val);
+                               iowrite8(addr^3, val);
                        //*(volatile unsigned char *)addr = (unsigned char)val;
                }
 
@@ -627,7 +627,7 @@ static void clk_change(uint32_t clk, uint32_t ratio, uint32_t baud)
                break;
        }
 
-       HAL_WORD_REG_WRITE(0x50040, (0x300|clk_sel|(ratio>>1)<<12));
+       iowrite32(0x50040, (0x300|clk_sel|(ratio>>1)<<12));
        A_UART_HWINIT((clk*1000*1000)/ratio, baud);
 
 }
@@ -793,26 +793,21 @@ static int db_wdt_cmd(char *cmd, char *param1, char *param2, char *param3)
         else if( strcmp(param1, "event") == 0 )
         {
                uint32_t event= 0x00123400;
-#define USB_BYTE_REG_WRITE(addr, val)          HAL_BYTE_REG_WRITE(USB_CTRL_BASE_ADDRESS|(uint8_t)(addr^3), (val))
-#define USB_BYTE_REG_READ(addr)                HAL_BYTE_REG_READ(USB_CTRL_BASE_ADDRESS|(uint8_t)(addr^3))
-
-#define USB_WORD_REG_WRITE(addr, val)          HAL_WORD_REG_WRITE(USB_CTRL_BASE_ADDRESS|(uint32_t)(addr), (val))
-#define USB_WORD_REG_READ(addr)                HAL_WORD_REG_READ(USB_CTRL_BASE_ADDRESS|(uint32_t)(addr))
 
-               // disable ep3 intr
-               USB_BYTE_REG_WRITE(0x17, USB_BYTE_REG_READ(0x17)|0xc0);
+               /* disable ep3 intr */
+               iowrite8_usb(0x17, ioread8_usb(0x17)|0xc0);
 
-               //ZM_CBUS_FIFO_SIZE_REG = 0xf;
-               USB_WORD_REG_WRITE(0x100, 0x0f);
+               /* ZM_CBUS_FIFO_SIZE_REG = 0xf */
+               iowrite32_usb(0x100, 0x0f);
 
-               //ZM_EP3_DATA_REG = event;
-               USB_WORD_REG_WRITE(0xF8, event);
+               /* ZM_EP3_DATA_REG = event; */
+               iowrite32_usb(0xF8, event);
 
-               // tx done
-               USB_BYTE_REG_WRITE(0xAE, USB_BYTE_REG_READ(0xAE)|0x08);
+               /* tx done */
+               iowrite8_usb(0xAE, ioread8_usb(0xAE) | 0x08);
 
-               // enable ep3 intr
-               USB_BYTE_REG_WRITE(0x17, USB_BYTE_REG_READ(0x17)&0xbf);
+               /* enable ep3 intr */
+               iowrite8_usb(0x17, ioread8_usb(0x17) & 0xbf);
         }
 }