+++ /dev/null
-/*
- * Copyright (c) 2013 Qualcomm Atheros, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted (subject to the limitations in the
- * disclaimer below) provided that the following conditions are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the
- * distribution.
- *
- * * Neither the name of Qualcomm Atheros nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
- * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
- * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#ifndef USB_STD_H
-#define USB_STD_H
-
-#define mDEV_REQ_REQ_DIR() (ControlCmd.Direction)
-#define mDEV_REQ_REQ_TYPE() (ControlCmd.Type)
-#define mDEV_REQ_REQ_RECI() (ControlCmd.Object)
-#define mDEV_REQ_REQ() (ControlCmd.Request)
-#define mDEV_REQ_VALUE() (ControlCmd.Value)
-#define mDEV_REQ_VALUE_LOW() (mLOW_BYTE(mDEV_REQ_VALUE()))
-#define mDEV_REQ_VALUE_HIGH() (mHIGH_BYTE(mDEV_REQ_VALUE()))
-#define mDEV_REQ_INDEX() (ControlCmd.Index)
-#define mDEV_REQ_LENGTH() (ControlCmd.Length)
-
-/******************** USB Protocol Definition *************************/
-/* Standard Request Code (Table 9-4) */
-#define USB_GET_STATUS 0
-#define USB_CLEAR_FEATURE 1
-#define USB_SET_FEATURE 3
-#define USB_SET_ADDRESS 5
-#define USB_GET_DESCRIPTOR 6
-#define USB_SET_DESCRIPTOR 7
-#define USB_GET_CONFIGURATION 8
-#define USB_SET_CONFIGURATION 9
-#define USB_GET_INTERFACE 10
-#define USB_SET_INTERFACE 11
-#define USB_SYNCH_FRAME 12
-
-/* Descriptor Type (Table 9-5) */
-#define USB_DESC_TYPE_DEVICE 1
-#define USB_DESC_TYPE_CONFIG 2
-#define USB_DESC_TYPE_STRING 3
-#define USB_DESC_TYPE_INTERFACE 4
-#define USB_DESC_TYPE_ENDPOINT 5
-
-/* Endpoint Attribute (Table 9-10) */
-#define USB_EP_ATTR_CTRL 0
-#define USB_EP_ATTR_ISOCH 1
-#define USB_EP_ATTR_BULK 2
-#define USB_EP_ATTR_INTRPT 3
-
-/*********************** for USB 2.0 **********************************/
-// Table 9-5. Descriptor Types
-#define DT_DEVICE 1
-#define DT_CONFIGURATION 2
-#define DT_STRING 3
-#define DT_INTERFACE 4
-#define DT_ENDPOINT 5
-#define DT_DEVICE_QUALIFIER 6
-#define DT_OTHER_SPEED_CONFIGURATION 7
-#define DT_INTERFACE_POWER 8
-
-/**********************************************************************/
-// Values for bmAttributes Field in USB_CONFIGURATION_DESCRIPTOR
-#define USB_BUS_POWERED 0x80
-#define USB_SELF_POWERED 0x40
-#define USB_REMOTE_WAKEUP 0x20
-
-#define cUSB_REQTYPE_DIR_POS 7
-#define cUSB_REQTYPE_DIR_LEN 1
-#define cUSB_REQTYPE_TYPE_POS 5
-#define cUSB_REQTYPE_TYPE_LEN 2
-#define cUSB_REQTYPE_RX_POS 0
-#define cUSB_REQTYPE_RX_LEN 5
-
-/* for USB State */
-#define cUSB_DEFAULT_STATE 0
-#define cUSB_ADDRESS_STATE 1
-#define cUSB_CONFIG_STATE 2
-
-/* for Data transfer direction */
-#define bmUSB_HOST_DIR 7 /* Bit 7 */
-#define cUSB_DIR_HOST_OUT 0
-#define cUSB_DIR_HOST_IN 1
-
-/* for Type */
-#define cUSB_REQTYPE_STD 0
-#define cUSB_REQTYPE_CLASS 1
-#define cUSB_REQTYPE_VENDOR 2
-
-/* for Recipient */
-#define cUSB_REQTYPE_DEVICE 0
-#define cUSB_REQTYPE_INTERFACE 1
-#define cUSB_REQTYPE_ENDPOINT 2
-#define cUSB_REQTYPE_OTHER 3
-
-/* for Descriptor Type */
-#define cUSB_DESTYPE_DEVICE 1
-#define cUSB_DESTYPE_CONFIG 2
-#define cUSB_DESTYPE_STRING 3
-#define cUSB_DESTYPE_INTERFACE 4
-#define cUSB_DESTYPE_ENDPOINT 5
-#define cUSB_DESTYPE_END cUSB_DESTYPE_ENDPOINT // for range check
-
-/* for Feature selector */
-#define cUSB_FEATSEL_RMWAKEUP 0
-#define cUSB_FEATSEL_EPHAL 1
-#define cUSB_FEATSEL_END cUSB_FEATSEL_EPHAL // for range check
-
-#define bmREQ_RECI 0
-#define bmwREQ_RECI 5 // mMASKS(bmwREQ_RECI, bmREQ_RECI)
-#define bmREQ_TYPE 5
-#define bmwREQ_TYPE 2 // mMASKS(bmwREQ_TYPE, bmREQ_TYPE)
-#define bmREQ_DIR 7
-#define bmwREQ_DIR 1
-
-#endif
projects / open-ath9k-htc-firmware.git / blobdiff