--- /dev/null
+/*
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted (subject to the limitations in the
+ * disclaimer below) provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ *
+ * * Neither the name of Qualcomm Atheros nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
+ * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
+ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef USB_STD_H
+#define USB_STD_H
+
+#define mDEV_REQ_REQ_DIR() (ControlCmd.Direction)
+#define mDEV_REQ_REQ_TYPE() (ControlCmd.Type)
+#define mDEV_REQ_REQ_RECI() (ControlCmd.Object)
+#define mDEV_REQ_REQ() (ControlCmd.Request)
+#define mDEV_REQ_VALUE() (ControlCmd.Value)
+#define mDEV_REQ_VALUE_LOW() (mLOW_BYTE(mDEV_REQ_VALUE()))
+#define mDEV_REQ_VALUE_HIGH() (mHIGH_BYTE(mDEV_REQ_VALUE()))
+#define mDEV_REQ_INDEX() (ControlCmd.Index)
+#define mDEV_REQ_LENGTH() (ControlCmd.Length)
+
+/******************** USB Protocol Definition *************************/
+/* Standard Request Code (Table 9-4) */
+#define USB_GET_STATUS 0
+#define USB_CLEAR_FEATURE 1
+#define USB_SET_FEATURE 3
+#define USB_SET_ADDRESS 5
+#define USB_GET_DESCRIPTOR 6
+#define USB_SET_DESCRIPTOR 7
+#define USB_GET_CONFIGURATION 8
+#define USB_SET_CONFIGURATION 9
+#define USB_GET_INTERFACE 10
+#define USB_SET_INTERFACE 11
+#define USB_SYNCH_FRAME 12
+
+/* Descriptor Type (Table 9-5) */
+#define USB_DESC_TYPE_DEVICE 1
+#define USB_DESC_TYPE_CONFIG 2
+#define USB_DESC_TYPE_STRING 3
+#define USB_DESC_TYPE_INTERFACE 4
+#define USB_DESC_TYPE_ENDPOINT 5
+
+/* Endpoint Attribute (Table 9-10) */
+#define USB_EP_ATTR_CTRL 0
+#define USB_EP_ATTR_ISOCH 1
+#define USB_EP_ATTR_BULK 2
+#define USB_EP_ATTR_INTRPT 3
+
+/*********************** for USB 2.0 **********************************/
+// Table 9-5. Descriptor Types
+#define DT_DEVICE 1
+#define DT_CONFIGURATION 2
+#define DT_STRING 3
+#define DT_INTERFACE 4
+#define DT_ENDPOINT 5
+#define DT_DEVICE_QUALIFIER 6
+#define DT_OTHER_SPEED_CONFIGURATION 7
+#define DT_INTERFACE_POWER 8
+
+/**********************************************************************/
+// Values for bmAttributes Field in USB_CONFIGURATION_DESCRIPTOR
+#define USB_BUS_POWERED 0x80
+#define USB_SELF_POWERED 0x40
+#define USB_REMOTE_WAKEUP 0x20
+
+#define cUSB_REQTYPE_DIR_POS 7
+#define cUSB_REQTYPE_DIR_LEN 1
+#define cUSB_REQTYPE_TYPE_POS 5
+#define cUSB_REQTYPE_TYPE_LEN 2
+#define cUSB_REQTYPE_RX_POS 0
+#define cUSB_REQTYPE_RX_LEN 5
+
+/* for USB State */
+#define cUSB_DEFAULT_STATE 0
+#define cUSB_ADDRESS_STATE 1
+#define cUSB_CONFIG_STATE 2
+
+/* for Data transfer direction */
+#define bmUSB_HOST_DIR 7 /* Bit 7 */
+#define cUSB_DIR_HOST_OUT 0
+#define cUSB_DIR_HOST_IN 1
+
+/* for Type */
+#define cUSB_REQTYPE_STD 0
+#define cUSB_REQTYPE_CLASS 1
+#define cUSB_REQTYPE_VENDOR 2
+
+/* for Recipient */
+#define cUSB_REQTYPE_DEVICE 0
+#define cUSB_REQTYPE_INTERFACE 1
+#define cUSB_REQTYPE_ENDPOINT 2
+#define cUSB_REQTYPE_OTHER 3
+
+/* for Descriptor Type */
+#define cUSB_DESTYPE_DEVICE 1
+#define cUSB_DESTYPE_CONFIG 2
+#define cUSB_DESTYPE_STRING 3
+#define cUSB_DESTYPE_INTERFACE 4
+#define cUSB_DESTYPE_ENDPOINT 5
+#define cUSB_DESTYPE_END cUSB_DESTYPE_ENDPOINT // for range check
+
+/* for Feature selector */
+#define cUSB_FEATSEL_RMWAKEUP 0
+#define cUSB_FEATSEL_EPHAL 1
+#define cUSB_FEATSEL_END cUSB_FEATSEL_EPHAL // for range check
+
+#define bmREQ_RECI 0
+#define bmwREQ_RECI 5 // mMASKS(bmwREQ_RECI, bmREQ_RECI)
+#define bmREQ_TYPE 5
+#define bmwREQ_TYPE 2 // mMASKS(bmwREQ_TYPE, bmREQ_TYPE)
+#define bmREQ_DIR 7
+#define bmwREQ_DIR 1
+
+#endif
projects / open-ath9k-htc-firmware.git / blobdiff