#define IEEE80211_QOS_CTL_ACK_POLICY_NOACK 0x0020
#define IEEE80211_QOS_CTL_ACK_POLICY_NO_EXPL 0x0040
#define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK 0x0060
+#define IEEE80211_QOS_CTL_ACK_POLICY_MASK 0x0060
/* A-MSDU 802.11n */
#define IEEE80211_QOS_CTL_A_MSDU_PRESENT 0x0080
/* Mesh Control 802.11s */
return hdrlen;
}
+/**
+ * ieee80211_is_first_frag - check if IEEE80211_SCTL_FRAG is not set
+ * @seq_ctrl: frame sequence control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_first_frag(__le16 seq_ctrl)
+{
+ return (seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG)) == 0;
+}
+
struct ieee80211s_hdr {
u8 flags;
u8 ttl;
#define MESH_FLAGS_AE 0x3
#define MESH_FLAGS_PS_DEEP 0x4
+/**
+ * enum ieee80211_preq_flags - mesh PREQ element flags
+ *
+ * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield
+ */
+enum ieee80211_preq_flags {
+ IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2,
+};
+
+/**
+ * enum ieee80211_preq_target_flags - mesh PREQ element per target flags
+ *
+ * @IEEE80211_PREQ_TO_FLAG: target only subfield
+ * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield
+ */
+enum ieee80211_preq_target_flags {
+ IEEE80211_PREQ_TO_FLAG = 1<<0,
+ IEEE80211_PREQ_USN_FLAG = 1<<2,
+};
+
/**
* struct ieee80211_quiet_ie
*
u8 rann_hopcount;
u8 rann_ttl;
u8 rann_addr[6];
- u32 rann_seq;
- u32 rann_interval;
- u32 rann_metric;
+ __le32 rann_seq;
+ __le32 rann_interval;
+ __le32 rann_metric;
} __attribute__ ((packed));
enum ieee80211_rann_flags {
};
/**
- * struct ieee80211_ht_info - HT information
+ * struct ieee80211_ht_operation - HT operation IE
*
- * This structure is the "HT information element" as
- * described in 802.11n D5.0 7.3.2.58
+ * This structure is the "HT operation element" as
+ * described in 802.11n-2009 7.3.2.57
*/
-struct ieee80211_ht_info {
- u8 control_chan;
+struct ieee80211_ht_operation {
+ u8 primary_chan;
u8 ht_param;
__le16 operation_mode;
__le16 stbc_param;
#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03
#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04
#define IEEE80211_HT_PARAM_RIFS_MODE 0x08
-#define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10
-#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0
/* for operation_mode */
#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003
WLAN_EID_EXT_SUPP_RATES = 50,
WLAN_EID_HT_CAPABILITY = 45,
- WLAN_EID_HT_INFORMATION = 61,
+ WLAN_EID_HT_OPERATION = 61,
WLAN_EID_RSN = 48,
WLAN_EID_MMIE = 76,
/* TDLS specific payload type in the LLC/SNAP header */
#define WLAN_TDLS_SNAP_RFTYPE 0x2
+/**
+ * enum - mesh synchronization method identifier
+ *
+ * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method
+ * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method
+ * that will be specified in a vendor specific information element
+ */
+enum {
+ IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1,
+ IEEE80211_SYNC_METHOD_VENDOR = 255,
+};
+
/**
* enum - mesh path selection protocol identifier
*
* @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
* @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
- * be specified in a vendor specific information element
+ * be specified in a vendor specific information element
*/
enum {
- IEEE80211_PATH_PROTOCOL_HWMP = 0,
+ IEEE80211_PATH_PROTOCOL_HWMP = 1,
IEEE80211_PATH_PROTOCOL_VENDOR = 255,
};
*
* @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
* @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
- * specified in a vendor specific information element
+ * specified in a vendor specific information element
*/
enum {
- IEEE80211_PATH_METRIC_AIRTIME = 0,
+ IEEE80211_PATH_METRIC_AIRTIME = 1,
IEEE80211_PATH_METRIC_VENDOR = 255,
};
+/**
+ * enum ieee80211_root_mode_identifier - root mesh STA mode identifier
+ *
+ * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode
+ *
+ * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default)
+ * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than
+ * this value
+ * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports
+ * the proactive PREQ with proactive PREP subfield set to 0
+ * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA
+ * supports the proactive PREQ with proactive PREP subfield set to 1
+ * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports
+ * the proactive RANN
+ */
+enum ieee80211_root_mode_identifier {
+ IEEE80211_ROOTMODE_NO_ROOT = 0,
+ IEEE80211_ROOTMODE_ROOT = 1,
+ IEEE80211_PROACTIVE_PREQ_NO_PREP = 2,
+ IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3,
+ IEEE80211_PROACTIVE_RANN = 4,
+};
/*
* IEEE 802.11-2007 7.3.2.9 Country information element
#define WLAN_CIPHER_SUITE_WEP104 0x000FAC05
#define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06
+#define WLAN_CIPHER_SUITE_SMS4 0x00147201
+
/* AKM suite selectors */
#define WLAN_AKM_SUITE_8021X 0x000FAC01
#define WLAN_AKM_SUITE_PSK 0x000FAC02
#define WLAN_OUI_WFA 0x506f9a
#define WLAN_OUI_TYPE_WFA_P2P 9
+#define WLAN_OUI_MICROSOFT 0x0050f2
+#define WLAN_OUI_TYPE_MICROSOFT_WPA 1
/*
* WMM/802.11e Tspec Element
return false;
}
+/**
+ * ieee80211_is_public_action - check if frame is a public action frame
+ * @hdr: the frame
+ * @len: length of the frame
+ */
+static inline bool ieee80211_is_public_action(struct ieee80211_hdr *hdr,
+ size_t len)
+{
+ struct ieee80211_mgmt *mgmt = (void *)hdr;
+
+ if (len < IEEE80211_MIN_ACTION_SIZE)
+ return false;
+ if (!ieee80211_is_action(hdr->frame_control))
+ return false;
+ return mgmt->u.action.category == WLAN_CATEGORY_PUBLIC;
+}
+
/**
* ieee80211_fhss_chan_to_freq - get channel frequency
* @channel: the FHSS channel
projects / carl9170fw.git / blobdiff