/* U-APSD queue for WMM IEs sent by AP */
#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7)
+#define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK 0x0f
/* U-APSD queues for WMM IEs sent by STA */
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO (1<<0)
cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
}
+static inline unsigned int ieee80211_hdrlen(__le16 fc)
+{
+ unsigned int hdrlen = 24;
+
+ if (ieee80211_has_a4(fc))
+ hdrlen = 30;
+
+ if (ieee80211_is_data_qos(fc)) {
+ hdrlen += IEEE80211_QOS_CTL_LEN;
+ if (ieee80211_has_order(fc))
+ hdrlen += IEEE80211_HT_CTL_LEN;
+ }
+
+ return hdrlen;
+}
+
struct ieee80211s_hdr {
u8 flags;
u8 ttl;
__le32 seqnum;
u8 eaddr1[6];
u8 eaddr2[6];
- u8 eaddr3[6];
} __attribute__ ((packed));
/* Mesh flags */
__u8 ta[6];
__le16 control;
__le16 start_seq_num;
-} __attribute__((packed));
+} __attribute__((packed)) __aligned(4);
/* 802.11 BA(R) control masks */
#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000
#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000
#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000
+/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */
+#define IEEE80211_HT_EXT_CAP_PCO 0x0001
+#define IEEE80211_HT_EXT_CAP_PCO_TIME 0x0006
+#define IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT 1
+#define IEEE80211_HT_EXT_CAP_MCS_FB 0x0300
+#define IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT 8
+#define IEEE80211_HT_EXT_CAP_HTC_SUP 0x0400
+#define IEEE80211_HT_EXT_CAP_RD_RESPONDER 0x0800
+
/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
/* block-ack parameters */
#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
-#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0
+#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
#define WLAN_AUTH_FT 2
+#define WLAN_AUTH_SAE 3
#define WLAN_AUTH_LEAP 128
#define WLAN_AUTH_CHALLENGE_LEN 128
WLAN_STATUS_NO_DIRECT_LINK = 48,
WLAN_STATUS_STA_NOT_PRESENT = 49,
WLAN_STATUS_STA_NOT_QSTA = 50,
+ /* 802.11s */
+ WLAN_STATUS_ANTI_CLOG_REQUIRED = 76,
+ WLAN_STATUS_FCG_NOT_SUPP = 78,
+ WLAN_STATUS_STA_NO_TBTT = 78,
};
WLAN_REASON_QSTA_REQUIRE_SETUP = 38,
WLAN_REASON_QSTA_TIMEOUT = 39,
WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45,
+ /* 802.11s */
+ WLAN_REASON_MESH_PEER_CANCELED = 52,
+ WLAN_REASON_MESH_MAX_PEERS = 53,
+ WLAN_REASON_MESH_CONFIG = 54,
+ WLAN_REASON_MESH_CLOSE = 55,
+ WLAN_REASON_MESH_MAX_RETRIES = 56,
+ WLAN_REASON_MESH_CONFIRM_TIMEOUT = 57,
+ WLAN_REASON_MESH_INVALID_GTK = 58,
+ WLAN_REASON_MESH_INCONSISTENT_PARAM = 59,
+ WLAN_REASON_MESH_INVALID_SECURITY = 60,
+ WLAN_REASON_MESH_PATH_ERROR = 61,
+ WLAN_REASON_MESH_PATH_NOFORWARD = 62,
+ WLAN_REASON_MESH_PATH_DEST_UNREACHABLE = 63,
+ WLAN_REASON_MAC_EXISTS_IN_MBSS = 64,
+ WLAN_REASON_MESH_CHAN_REGULATORY = 65,
+ WLAN_REASON_MESH_CHAN = 66,
};
WLAN_EID_TS_DELAY = 43,
WLAN_EID_TCLAS_PROCESSING = 44,
WLAN_EID_QOS_CAPA = 46,
- /* 802.11s
- *
- * All mesh EID numbers are pending IEEE 802.11 ANA approval.
- * The numbers have been incremented from those suggested in
- * 802.11s/D2.0 so that MESH_CONFIG does not conflict with
- * EXT_SUPP_RATES.
+ /* 802.11s */
+ WLAN_EID_MESH_CONFIG = 113,
+ WLAN_EID_MESH_ID = 114,
+ WLAN_EID_LINK_METRIC_REPORT = 115,
+ WLAN_EID_CONGESTION_NOTIFICATION = 116,
+ /* Note that the Peer Link IE has been replaced with the similar
+ * Peer Management IE. We will keep the former definition until mesh
+ * code is changed to comply with latest 802.11s drafts.
*/
- WLAN_EID_MESH_CONFIG = 51,
- WLAN_EID_MESH_ID = 52,
- WLAN_EID_PEER_LINK = 55,
- WLAN_EID_PREQ = 68,
- WLAN_EID_PREP = 69,
- WLAN_EID_PERR = 70,
- WLAN_EID_RANN = 49, /* compatible with FreeBSD */
+ WLAN_EID_PEER_LINK = 55, /* no longer in 802.11s drafts */
+ WLAN_EID_PEER_MGMT = 117,
+ WLAN_EID_CHAN_SWITCH_PARAM = 118,
+ WLAN_EID_MESH_AWAKE_WINDOW = 119,
+ WLAN_EID_BEACON_TIMING = 120,
+ WLAN_EID_MCCAOP_SETUP_REQ = 121,
+ WLAN_EID_MCCAOP_SETUP_RESP = 122,
+ WLAN_EID_MCCAOP_ADVERT = 123,
+ WLAN_EID_MCCAOP_TEARDOWN = 124,
+ WLAN_EID_GANN = 125,
+ WLAN_EID_RANN = 126,
+ WLAN_EID_PREQ = 130,
+ WLAN_EID_PREP = 131,
+ WLAN_EID_PERR = 132,
+ WLAN_EID_PXU = 137,
+ WLAN_EID_PXUC = 138,
+ WLAN_EID_AUTH_MESH_PEER_EXCH = 139,
+ WLAN_EID_MIC = 140,
WLAN_EID_PWR_CONSTRAINT = 32,
WLAN_EID_PWR_CAPABILITY = 33,
WLAN_EID_BSS_AC_ACCESS_DELAY = 68,
WLAN_EID_RRM_ENABLED_CAPABILITIES = 70,
WLAN_EID_MULTIPLE_BSSID = 71,
+ WLAN_EID_BSS_COEX_2040 = 72,
+ WLAN_EID_OVERLAP_BSS_SCAN_PARAM = 74,
+ WLAN_EID_EXT_CAPABILITY = 127,
WLAN_EID_MOBILITY_DOMAIN = 54,
WLAN_EID_FAST_BSS_TRANSITION = 55,
WLAN_CATEGORY_HT = 7,
WLAN_CATEGORY_SA_QUERY = 8,
WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
+ WLAN_CATEGORY_MESH_ACTION = 13,
+ WLAN_CATEGORY_MULTIHOP_ACTION = 14,
+ WLAN_CATEGORY_SELF_PROTECTED = 15,
WLAN_CATEGORY_WMM = 17,
- WLAN_CATEGORY_MESH_PLINK = 30, /* Pending ANA approval */
- WLAN_CATEGORY_MESH_PATH_SEL = 32, /* Pending ANA approval */
+ /* TODO: remove MESH_PATH_SEL after mesh is updated
+ * to current 802.11s draft */
+ WLAN_CATEGORY_MESH_PATH_SEL = 32,
WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
};
WLAN_KEY_LEN_AES_CMAC = 16,
};
+/**
+ * enum - mesh path selection protocol identifier
+ *
+ * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
+ * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
+ * be specified in a vendor specific information element
+ */
+enum {
+ IEEE80211_PATH_PROTOCOL_HWMP = 0,
+ IEEE80211_PATH_PROTOCOL_VENDOR = 255,
+};
+
+/**
+ * enum - mesh path selection metric identifier
+ *
+ * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
+ * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
+ * specified in a vendor specific information element
+ */
+enum {
+ IEEE80211_PATH_METRIC_AIRTIME = 0,
+ IEEE80211_PATH_METRIC_VENDOR = 255,
+};
+
+
/*
* IEEE 802.11-2007 7.3.2.9 Country information element
*
/* Although the spec says 8 I'm seeing 6 in practice */
#define IEEE80211_COUNTRY_IE_MIN_LEN 6
+/* The Country String field of the element shall be 3 octets in length */
+#define IEEE80211_COUNTRY_STRING_LEN 3
+
/*
* For regulatory extension stuff see IEEE 802.11-2007
* Annex I (page 1141) and Annex J (page 1147). Also
/* AKM suite selectors */
#define WLAN_AKM_SUITE_8021X 0x000FAC01
#define WLAN_AKM_SUITE_PSK 0x000FAC02
+#define WLAN_AKM_SUITE_SAE 0x000FAC08
+#define WLAN_AKM_SUITE_FT_OVER_SAE 0x000FAC09
#define WLAN_MAX_KEY_LEN 32
projects / carl9170fw.git / blobdiff