carl9170 firmware: drop timer1

[carl9170fw.git] / carlfw / src / main.c

diff --git a/carlfw/src/main.c b/carlfw/src/main.c
index 0653ae44dde34bb8be28d9061b014a8c7d298c6c..92b74a0a12a37316d930fccb3ecef19746940cbd 100644 (file)
--- a/carlfw/src/main.c
+++ b/carlfw/src/main.c
@@ -29,6 +29,7 @@
 #include "printf.h"
 #include "gpio.h"
 #include "wl.h"
+#include "rf.h"
 #include "usb.h"
 
 #define AR9170_WATCH_DOG_TIMER            0x100
@@ -45,6 +46,38 @@ static void timer_init(const unsigned int timer, const unsigned int interval)
        orl(AR9170_TIMER_REG_INTERRUPT, BIT(timer));
 }
 
+void clock_set(enum cpu_clock_t clock_, bool on)
+{
+       /*
+        * Word of Warning!
+        * This setting does more than just mess with the CPU Clock.
+        * So watch out, if you need _stable_ timer interrupts.
+        */
+#ifdef CONFIG_CARL9170FW_RADIO_FUNCTIONS
+        if (fw.phy.frequency < 3000000)
+               set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);
+        else
+                set(AR9170_PWR_REG_PLL_ADDAC, 0x5143);
+#else
+       set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);
+#endif /* CONFIG_CARL9170FW_RADIO_FUNCTIONS */
+
+       fw.ticks_per_usec = GET_VAL(AR9170_PWR_PLL_ADDAC_DIV,
+               get(AR9170_PWR_REG_PLL_ADDAC));
+
+       set(AR9170_PWR_REG_CLOCK_SEL, (uint32_t) ((on ? 0x70 : 0x600) | clock_));
+
+       switch (clock_) {
+       case AHB_20_22MHZ:
+               fw.ticks_per_usec >>= 1;
+       case AHB_40MHZ_OSC:
+       case AHB_40_44MHZ:
+               fw.ticks_per_usec >>= 1;
+       case AHB_80_88MHZ:
+               break;
+       }
+}
+
 static void init(void)
 {
        led_init();
@@ -101,6 +134,10 @@ static void timer0_isr(void)
        gpio_timer();
 #endif /* CONFIG_CARL9170FW_GPIO_INTERRUPT */
 
+#ifdef CONFIG_CARL9170FW_RADIO_FUNCTIONS
+       tally_update();
+#endif /* CONFIG_CARL9170FW_RADIO_FUNCTIONS */
+
 #ifdef CONFIG_CARL9170FW_DEBUG_LED_HEARTBEAT
        set(AR9170_GPIO_REG_PORT_DATA, get(AR9170_GPIO_REG_PORT_DATA) ^ 1);
 #endif /* CONFIG_CARL9170FW_DEBUG_LED_HEARTBEAT */
@@ -163,7 +200,7 @@ static void __noreturn main_loop(void)
  * we put _start() there with the linker script carl9170.lds.
  */
 
-void start(void)
+void __section(boot) start(void)
 {
        clock_set(AHB_40MHZ_OSC, true);