carl9170 firmware: remove noisy debug messages

[carl9170fw.git] / carlfw / src / main.c

diff --git a/carlfw/src/main.c b/carlfw/src/main.c
index bf6602a8d8cc29af60916edb97737b4facf9d84f..2c8ea9a30540acf7cf2744e9599943e4ad4caa37 100644 (file)
--- a/carlfw/src/main.c
+++ b/carlfw/src/main.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2000-2005 ZyDAS Technology Corporation
  * Copyright (c) 2007-2009 Atheros Communications, Inc.
  * Copyright   2009    Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009, 2010 Christian Lamparter <chunkeey@googlemail.com>
+ * Copyright 2009-2011 Christian Lamparter <chunkeey@googlemail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -29,6 +29,7 @@
 #include "printf.h"
 #include "gpio.h"
 #include "wl.h"
+#include "usb.h"
 
 #define AR9170_WATCH_DOG_TIMER            0x100
 
@@ -44,6 +45,36 @@ static void timer_init(const unsigned int timer, const unsigned int interval)
        orl(AR9170_TIMER_REG_INTERRUPT, BIT(timer));
 }
 
+void clock_set(enum cpu_clock_t clock_, bool on)
+{
+       /*
+        * Word of Warning!
+        * This setting does more than just mess with the CPU Clock.
+        * So watch out, if you need _stable_ timer interrupts.
+        */
+        if (fw.phy.frequency < 3000000)
+               set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);
+        else
+                set(AR9170_PWR_REG_PLL_ADDAC, 0x5143);
+
+       fw.ticks_per_usec = GET_VAL(AR9170_PWR_PLL_ADDAC_DIV,
+               get(AR9170_PWR_REG_PLL_ADDAC));
+
+       set(AR9170_PWR_REG_CLOCK_SEL, (uint32_t) ((on ? 0x70 : 0x600) | clock_));
+
+       switch (clock_) {
+       case AHB_20_22MHZ:
+               fw.ticks_per_usec >>= 1;
+       case AHB_40MHZ_OSC:
+       case AHB_40_44MHZ:
+               fw.ticks_per_usec >>= 1;
+       case AHB_80_88MHZ:
+               break;
+       }
+
+       timer_init(1, (fw.ticks_per_usec * 25) >> 1);
+}
+
 static void init(void)
 {
        led_init();
@@ -70,14 +101,9 @@ static void init(void)
        orl(AR9170_MAC_REG_AFTER_PNP, 1);
 
        /* Init watch dog control flag */
-#ifdef CONFIG_CARL9170FW_WATCHDOG
        fw.watchdog_enable = 1;
 
        set(AR9170_TIMER_REG_WATCH_DOG, AR9170_WATCH_DOG_TIMER);
-#else
-       fw.watchdog_enable = 0;
-       set(AR9170_TIMER_REG_WATCH_DOG, 0xffff);
-#endif /* CONFIG_CARL9170FW_WATCHDOG */
 
 #ifdef CONFIG_CARL9170FW_GPIO_INTERRUPT
        fw.cached_gpio_state.gpio = get(AR9170_GPIO_REG_PORT_DATA) &
@@ -110,6 +136,10 @@ static void timer0_isr(void)
 #endif /* CONFIG_CARL9170FW_DEBUG_LED_HEARTBEAT */
 }
 
+static void timer1_isr(void)
+{
+}
+
 static void handle_timer(void)
 {
        uint32_t intr;
@@ -129,6 +159,8 @@ static void handle_timer(void)
 
        HANDLER(intr, BIT(0), timer0_isr);
 
+       HANDLER(intr, BIT(1), timer1_isr);
+
        if (intr)
                DBG("Unhandled Timer Event %x", (unsigned int) intr);
 
@@ -167,7 +199,7 @@ static void __noreturn main_loop(void)
  * we put _start() there with the linker script carl9170.lds.
  */
 
-void start(void)
+void __section(boot) start(void)
 {
        clock_set(AHB_40MHZ_OSC, true);