carl9170 firmware: always enable HW watchdog

[carl9170fw.git] / carlfw / src / main.c

diff --git a/carlfw/src/main.c b/carlfw/src/main.c
index 55acb44792e9fe776666d6bd218d2abfc037a4c5..0653ae44dde34bb8be28d9061b014a8c7d298c6c 100644 (file)
--- a/carlfw/src/main.c
+++ b/carlfw/src/main.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2000-2005 ZyDAS Technology Corporation
  * Copyright (c) 2007-2009 Atheros Communications, Inc.
  * Copyright   2009    Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009, 2010 Christian Lamparter <chunkeey@googlemail.com>
+ * Copyright 2009-2011 Christian Lamparter <chunkeey@googlemail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -29,6 +29,7 @@
 #include "printf.h"
 #include "gpio.h"
 #include "wl.h"
+#include "usb.h"
 
 #define AR9170_WATCH_DOG_TIMER            0x100
 
@@ -70,14 +71,9 @@ static void init(void)
        orl(AR9170_MAC_REG_AFTER_PNP, 1);
 
        /* Init watch dog control flag */
-#ifdef CONFIG_CARL9170FW_WATCHDOG
        fw.watchdog_enable = 1;
 
        set(AR9170_TIMER_REG_WATCH_DOG, AR9170_WATCH_DOG_TIMER);
-#else
-       fw.watchdog_enable = 0;
-       set(AR9170_TIMER_REG_WATCH_DOG, 0xffff);
-#endif /* CONFIG_CARL9170FW_WATCHDOG */
 
 #ifdef CONFIG_CARL9170FW_GPIO_INTERRUPT
        fw.cached_gpio_state.gpio = get(AR9170_GPIO_REG_PORT_DATA) &
@@ -159,8 +155,8 @@ static void __noreturn main_loop(void)
 
 /*
  * The bootcode will work with the device driver to load the firmware
- * onto the device's Program SRAM. The Program SRAM has a size of 32 KB
- * and also contains the stack, which grows down from 0x208000.
+ * onto the device's Program SRAM. The Program SRAM has a size of 16 KB
+ * and also contains the stack, which grows down from 0x204000.
  *
  * The Program SRAM starts at address 0x200000 on the device.
  * The firmware entry point (0x200004) is located in boot.S.
@@ -169,7 +165,7 @@ static void __noreturn main_loop(void)
 
 void start(void)
 {
-       clock_set(true, AHB_40MHZ_OSC);
+       clock_set(AHB_40MHZ_OSC, true);
 
        /* watchdog magic pattern check */
        if ((get(AR9170_PWR_REG_WATCH_DOG_MAGIC) & 0xffff0000) == 0x12340000) {