+#define IEEE80211_VHT_CAP_EXT_NSS_BW_SHIFT 30
+#define IEEE80211_VHT_CAP_EXT_NSS_BW_MASK 0xc0000000
+
+/**
+ * ieee80211_get_vht_max_nss - return max NSS for a given bandwidth/MCS
+ * @cap: VHT capabilities of the peer
+ * @bw: bandwidth to use
+ * @mcs: MCS index to use
+ * @ext_nss_bw_capable: indicates whether or not the local transmitter
+ * (rate scaling algorithm) can deal with the new logic
+ * (dot11VHTExtendedNSSBWCapable)
+ * @max_vht_nss: current maximum NSS as advertised by the STA in
+ * operating mode notification, can be 0 in which case the
+ * capability data will be used to derive this (from MCS support)
+ *
+ * Due to the VHT Extended NSS Bandwidth Support, the maximum NSS can
+ * vary for a given BW/MCS. This function parses the data.
+ *
+ * Note: This function is exported by cfg80211.
+ */
+int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
+ enum ieee80211_vht_chanwidth bw,
+ int mcs, bool ext_nss_bw_capable,
+ unsigned int max_vht_nss);
+
+/**
+ * enum ieee80211_ap_reg_power - regulatory power for a Access Point
+ *
+ * @IEEE80211_REG_UNSET_AP: Access Point has no regulatory power mode
+ * @IEEE80211_REG_LPI: Indoor Access Point
+ * @IEEE80211_REG_SP: Standard power Access Point
+ * @IEEE80211_REG_VLP: Very low power Access Point
+ * @IEEE80211_REG_AP_POWER_AFTER_LAST: internal
+ * @IEEE80211_REG_AP_POWER_MAX: maximum value
+ */
+enum ieee80211_ap_reg_power {
+ IEEE80211_REG_UNSET_AP,
+ IEEE80211_REG_LPI_AP,
+ IEEE80211_REG_SP_AP,
+ IEEE80211_REG_VLP_AP,
+ IEEE80211_REG_AP_POWER_AFTER_LAST,
+ IEEE80211_REG_AP_POWER_MAX =
+ IEEE80211_REG_AP_POWER_AFTER_LAST - 1,
+};
+
+/**
+ * enum ieee80211_client_reg_power - regulatory power for a client
+ *
+ * @IEEE80211_REG_UNSET_CLIENT: Client has no regulatory power mode
+ * @IEEE80211_REG_DEFAULT_CLIENT: Default Client
+ * @IEEE80211_REG_SUBORDINATE_CLIENT: Subordinate Client
+ * @IEEE80211_REG_CLIENT_POWER_AFTER_LAST: internal
+ * @IEEE80211_REG_CLIENT_POWER_MAX: maximum value
+ */
+enum ieee80211_client_reg_power {
+ IEEE80211_REG_UNSET_CLIENT,
+ IEEE80211_REG_DEFAULT_CLIENT,
+ IEEE80211_REG_SUBORDINATE_CLIENT,
+ IEEE80211_REG_CLIENT_POWER_AFTER_LAST,
+ IEEE80211_REG_CLIENT_POWER_MAX =
+ IEEE80211_REG_CLIENT_POWER_AFTER_LAST - 1,
+};
+
+/* 802.11ax HE MAC capabilities */
+#define IEEE80211_HE_MAC_CAP0_HTC_HE 0x01
+#define IEEE80211_HE_MAC_CAP0_TWT_REQ 0x02
+#define IEEE80211_HE_MAC_CAP0_TWT_RES 0x04
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_NOT_SUPP 0x00
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_1 0x08
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_2 0x10
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_3 0x18
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_MASK 0x18
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_1 0x00
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_2 0x20
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_4 0x40
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_8 0x60
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_16 0x80
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_32 0xa0
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_64 0xc0
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_UNLIMITED 0xe0
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_MASK 0xe0
+
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_UNLIMITED 0x00
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_128 0x01
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_256 0x02
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_512 0x03
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_MASK 0x03
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_0US 0x00
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_8US 0x04
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US 0x08
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK 0x0c
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_1 0x00
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_2 0x10
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_3 0x20
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_4 0x30
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_5 0x40
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_6 0x50
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_7 0x60
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8 0x70
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_MASK 0x70
+
+/* Link adaptation is split between byte HE_MAC_CAP1 and
+ * HE_MAC_CAP2. It should be set only if IEEE80211_HE_MAC_CAP0_HTC_HE
+ * in which case the following values apply:
+ * 0 = No feedback.
+ * 1 = reserved.
+ * 2 = Unsolicited feedback.
+ * 3 = both
+ */
+#define IEEE80211_HE_MAC_CAP1_LINK_ADAPTATION 0x80
+
+#define IEEE80211_HE_MAC_CAP2_LINK_ADAPTATION 0x01
+#define IEEE80211_HE_MAC_CAP2_ALL_ACK 0x02
+#define IEEE80211_HE_MAC_CAP2_TRS 0x04
+#define IEEE80211_HE_MAC_CAP2_BSR 0x08
+#define IEEE80211_HE_MAC_CAP2_BCAST_TWT 0x10
+#define IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP 0x20
+#define IEEE80211_HE_MAC_CAP2_MU_CASCADING 0x40
+#define IEEE80211_HE_MAC_CAP2_ACK_EN 0x80
+
+#define IEEE80211_HE_MAC_CAP3_OMI_CONTROL 0x02
+#define IEEE80211_HE_MAC_CAP3_OFDMA_RA 0x04
+
+/* The maximum length of an A-MDPU is defined by the combination of the Maximum
+ * A-MDPU Length Exponent field in the HT capabilities, VHT capabilities and the
+ * same field in the HE capabilities.
+ */
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_0 0x00
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_1 0x08
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_2 0x10
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_3 0x18
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK 0x18
+#define IEEE80211_HE_MAC_CAP3_AMSDU_FRAG 0x20
+#define IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED 0x40
+#define IEEE80211_HE_MAC_CAP3_RX_CTRL_FRAME_TO_MULTIBSS 0x80
+
+#define IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG 0x01
+#define IEEE80211_HE_MAC_CAP4_QTP 0x02
+#define IEEE80211_HE_MAC_CAP4_BQR 0x04
+#define IEEE80211_HE_MAC_CAP4_PSR_RESP 0x08
+#define IEEE80211_HE_MAC_CAP4_NDP_FB_REP 0x10
+#define IEEE80211_HE_MAC_CAP4_OPS 0x20
+#define IEEE80211_HE_MAC_CAP4_AMSDU_IN_AMPDU 0x40
+/* Multi TID agg TX is split between byte #4 and #5
+ * The value is a combination of B39,B40,B41
+ */
+#define IEEE80211_HE_MAC_CAP4_MULTI_TID_AGG_TX_QOS_B39 0x80
+
+#define IEEE80211_HE_MAC_CAP5_MULTI_TID_AGG_TX_QOS_B40 0x01
+#define IEEE80211_HE_MAC_CAP5_MULTI_TID_AGG_TX_QOS_B41 0x02
+#define IEEE80211_HE_MAC_CAP5_SUBCHAN_SELECTIVE_TRANSMISSION 0x04
+#define IEEE80211_HE_MAC_CAP5_UL_2x996_TONE_RU 0x08
+#define IEEE80211_HE_MAC_CAP5_OM_CTRL_UL_MU_DATA_DIS_RX 0x10
+#define IEEE80211_HE_MAC_CAP5_HE_DYNAMIC_SM_PS 0x20
+#define IEEE80211_HE_MAC_CAP5_PUNCTURED_SOUNDING 0x40
+#define IEEE80211_HE_MAC_CAP5_HT_VHT_TRIG_FRAME_RX 0x80
+
+#define IEEE80211_HE_VHT_MAX_AMPDU_FACTOR 20
+#define IEEE80211_HE_HT_MAX_AMPDU_FACTOR 16
+#define IEEE80211_HE_6GHZ_MAX_AMPDU_FACTOR 13
+
+/* 802.11ax HE PHY capabilities */
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G 0x02
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G 0x04
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G 0x08
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G 0x10
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL 0x1e
+
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G 0x20
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G 0x40
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK 0xfe
+
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_20MHZ 0x01
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_40MHZ 0x02
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_20MHZ 0x04
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_40MHZ 0x08
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK 0x0f
+#define IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A 0x10
+#define IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD 0x20
+#define IEEE80211_HE_PHY_CAP1_HE_LTF_AND_GI_FOR_HE_PPDUS_0_8US 0x40
+/* Midamble RX/TX Max NSTS is split between byte #2 and byte #3 */
+#define IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS 0x80
+
+#define IEEE80211_HE_PHY_CAP2_MIDAMBLE_RX_TX_MAX_NSTS 0x01
+#define IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US 0x02
+#define IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ 0x04
+#define IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ 0x08
+#define IEEE80211_HE_PHY_CAP2_DOPPLER_TX 0x10
+#define IEEE80211_HE_PHY_CAP2_DOPPLER_RX 0x20
+
+/* Note that the meaning of UL MU below is different between an AP and a non-AP
+ * sta, where in the AP case it indicates support for Rx and in the non-AP sta
+ * case it indicates support for Tx.
+ */
+#define IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO 0x40
+#define IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO 0x80
+
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_NO_DCM 0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_BPSK 0x01
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_QPSK 0x02
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_16_QAM 0x03
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK 0x03
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_1 0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_2 0x04
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_NO_DCM 0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_BPSK 0x08
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_QPSK 0x10
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_16_QAM 0x18
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK 0x18
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_1 0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_2 0x20
+#define IEEE80211_HE_PHY_CAP3_RX_PARTIAL_BW_SU_IN_20MHZ_MU 0x40
+#define IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER 0x80
+
+#define IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE 0x01
+#define IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER 0x02
+
+/* Minimal allowed value of Max STS under 80MHz is 3 */
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 0x0c
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_5 0x10
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_6 0x14
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_7 0x18
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_8 0x1c
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_MASK 0x1c
+
+/* Minimal allowed value of Max STS above 80MHz is 3 */
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 0x60
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_5 0x80
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_6 0xa0
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_7 0xc0
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_8 0xe0
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_MASK 0xe0
+
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_1 0x00
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_2 0x01
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_3 0x02
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_4 0x03
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_5 0x04
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_6 0x05
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_7 0x06
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_8 0x07
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK 0x07
+
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_1 0x00
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2 0x08
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_3 0x10
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_4 0x18
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_5 0x20
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_6 0x28
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_7 0x30
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_8 0x38
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK 0x38
+
+#define IEEE80211_HE_PHY_CAP5_NG16_SU_FEEDBACK 0x40
+#define IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK 0x80
+
+#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_42_SU 0x01
+#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU 0x02
+#define IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMING_FB 0x04
+#define IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMING_PARTIAL_BW_FB 0x08
+#define IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB 0x10
+#define IEEE80211_HE_PHY_CAP6_PARTIAL_BW_EXT_RANGE 0x20
+#define IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO 0x40
+#define IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT 0x80
+
+#define IEEE80211_HE_PHY_CAP7_PSR_BASED_SR 0x01
+#define IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_SUPP 0x02
+#define IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI 0x04
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_1 0x08
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_2 0x10
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_3 0x18
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_4 0x20
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_5 0x28
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_6 0x30
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_7 0x38
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_MASK 0x38
+#define IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ 0x40
+#define IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ 0x80
+
+#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI 0x01
+#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G 0x02
+#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU 0x04
+#define IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU 0x08
+#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_1XLTF_AND_08_US_GI 0x10
+#define IEEE80211_HE_PHY_CAP8_MIDAMBLE_RX_TX_2X_AND_1XLTF 0x20
+#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_242 0x00
+#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_484 0x40
+#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_996 0x80
+#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_2x996 0xc0
+#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_MASK 0xc0
+
+#define IEEE80211_HE_PHY_CAP9_LONGER_THAN_16_SIGB_OFDM_SYM 0x01
+#define IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK 0x02
+#define IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU 0x04
+#define IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU 0x08
+#define IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB 0x10
+#define IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB 0x20
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_0US 0x0
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_8US 0x1
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_16US 0x2
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_RESERVED 0x3
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_POS 6
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_MASK 0xc0
+
+#define IEEE80211_HE_PHY_CAP10_HE_MU_M1RU_MAX_LTF 0x01
+
+/* 802.11ax HE TX/RX MCS NSS Support */
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_HIGHEST_MCS_POS (3)
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_POS (6)
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_POS (11)
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_MASK 0x07c0
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_MASK 0xf800
+
+/* TX/RX HE MCS Support field Highest MCS subfield encoding */
+enum ieee80211_he_highest_mcs_supported_subfield_enc {
+ HIGHEST_MCS_SUPPORTED_MCS7 = 0,
+ HIGHEST_MCS_SUPPORTED_MCS8,
+ HIGHEST_MCS_SUPPORTED_MCS9,
+ HIGHEST_MCS_SUPPORTED_MCS10,
+ HIGHEST_MCS_SUPPORTED_MCS11,
+};
+
+/* Calculate 802.11ax HE capabilities IE Tx/Rx HE MCS NSS Support Field size */
+static inline u8
+ieee80211_he_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap)
+{
+ u8 count = 4;
+
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
+ count += 4;
+
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)
+ count += 4;
+
+ return count;
+}
+
+/* 802.11ax HE PPE Thresholds */
+#define IEEE80211_PPE_THRES_NSS_SUPPORT_2NSS (1)
+#define IEEE80211_PPE_THRES_NSS_POS (0)
+#define IEEE80211_PPE_THRES_NSS_MASK (7)
+#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_2x966_AND_966_RU \
+ (BIT(5) | BIT(6))
+#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK 0x78
+#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_POS (3)
+#define IEEE80211_PPE_THRES_INFO_PPET_SIZE (3)
+#define IEEE80211_HE_PPE_THRES_INFO_HEADER_SIZE (7)
+
+/*
+ * Calculate 802.11ax HE capabilities IE PPE field size
+ * Input: Header byte of ppe_thres (first byte), and HE capa IE's PHY cap u8*
+ */
+static inline u8
+ieee80211_he_ppe_size(u8 ppe_thres_hdr, const u8 *phy_cap_info)
+{
+ u8 n;
+
+ if ((phy_cap_info[6] &
+ IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) == 0)
+ return 0;
+
+ n = hweight8(ppe_thres_hdr &
+ IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK);
+ n *= (1 + ((ppe_thres_hdr & IEEE80211_PPE_THRES_NSS_MASK) >>
+ IEEE80211_PPE_THRES_NSS_POS));
+
+ /*
+ * Each pair is 6 bits, and we need to add the 7 "header" bits to the
+ * total size.
+ */
+ n = (n * IEEE80211_PPE_THRES_INFO_PPET_SIZE * 2) + 7;
+ n = DIV_ROUND_UP(n, 8);
+
+ return n;
+}
+
+static inline bool ieee80211_he_capa_size_ok(const u8 *data, u8 len)
+{
+ const struct ieee80211_he_cap_elem *he_cap_ie_elem = (const void *)data;
+ u8 needed = sizeof(*he_cap_ie_elem);
+
+ if (len < needed)
+ return false;
+
+ needed += ieee80211_he_mcs_nss_size(he_cap_ie_elem);
+ if (len < needed)
+ return false;
+
+ if (he_cap_ie_elem->phy_cap_info[6] &
+ IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) {
+ if (len < needed + 1)
+ return false;
+ needed += ieee80211_he_ppe_size(data[needed],
+ he_cap_ie_elem->phy_cap_info);
+ }
+
+ return len >= needed;
+}
+
+/* HE Operation defines */
+#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK 0x00000007
+#define IEEE80211_HE_OPERATION_TWT_REQUIRED 0x00000008
+#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK 0x00003ff0
+#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_OFFSET 4
+#define IEEE80211_HE_OPERATION_VHT_OPER_INFO 0x00004000
+#define IEEE80211_HE_OPERATION_CO_HOSTED_BSS 0x00008000
+#define IEEE80211_HE_OPERATION_ER_SU_DISABLE 0x00010000
+#define IEEE80211_HE_OPERATION_6GHZ_OP_INFO 0x00020000
+#define IEEE80211_HE_OPERATION_BSS_COLOR_MASK 0x3f000000
+#define IEEE80211_HE_OPERATION_BSS_COLOR_OFFSET 24
+#define IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR 0x40000000
+#define IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED 0x80000000
+
+#define IEEE80211_6GHZ_CTRL_REG_LPI_AP 0
+#define IEEE80211_6GHZ_CTRL_REG_SP_AP 1
+
+/**
+ * ieee80211_he_6ghz_oper - HE 6 GHz operation Information field
+ * @primary: primary channel
+ * @control: control flags
+ * @ccfs0: channel center frequency segment 0
+ * @ccfs1: channel center frequency segment 1
+ * @minrate: minimum rate (in 1 Mbps units)
+ */
+struct ieee80211_he_6ghz_oper {
+ u8 primary;
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH 0x3
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_20MHZ 0
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_40MHZ 1
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_80MHZ 2
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_160MHZ 3
+#define IEEE80211_HE_6GHZ_OPER_CTRL_DUP_BEACON 0x4
+#define IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO 0x38
+ u8 control;
+ u8 ccfs0;
+ u8 ccfs1;
+ u8 minrate;
+} __packed;
+
+/*
+ * In "9.4.2.161 Transmit Power Envelope element" of "IEEE Std 802.11ax-2021",
+ * it show four types in "Table 9-275a-Maximum Transmit Power Interpretation
+ * subfield encoding", and two category for each type in "Table E-12-Regulatory
+ * Info subfield encoding in the United States".
+ * So it it totally max 8 Transmit Power Envelope element.
+ */
+#define IEEE80211_TPE_MAX_IE_COUNT 8
+/*
+ * In "Table 9-277—Meaning of Maximum Transmit Power Count subfield"
+ * of "IEEE Std 802.11ax™‐2021", the max power level is 8.
+ */
+#define IEEE80211_MAX_NUM_PWR_LEVEL 8
+
+#define IEEE80211_TPE_MAX_POWER_COUNT 8
+
+/* transmit power interpretation type of transmit power envelope element */
+enum ieee80211_tx_power_intrpt_type {
+ IEEE80211_TPE_LOCAL_EIRP,
+ IEEE80211_TPE_LOCAL_EIRP_PSD,
+ IEEE80211_TPE_REG_CLIENT_EIRP,
+ IEEE80211_TPE_REG_CLIENT_EIRP_PSD,
+};
+
+/**
+ * struct ieee80211_tx_pwr_env
+ *
+ * This structure represents the "Transmit Power Envelope element"
+ */
+struct ieee80211_tx_pwr_env {
+ u8 tx_power_info;
+ s8 tx_power[IEEE80211_TPE_MAX_POWER_COUNT];
+} __packed;
+
+#define IEEE80211_TX_PWR_ENV_INFO_COUNT 0x7
+#define IEEE80211_TX_PWR_ENV_INFO_INTERPRET 0x38
+#define IEEE80211_TX_PWR_ENV_INFO_CATEGORY 0xC0
+
+/*
+ * ieee80211_he_oper_size - calculate 802.11ax HE Operations IE size
+ * @he_oper_ie: byte data of the He Operations IE, stating from the byte
+ * after the ext ID byte. It is assumed that he_oper_ie has at least
+ * sizeof(struct ieee80211_he_operation) bytes, the caller must have
+ * validated this.
+ * @return the actual size of the IE data (not including header), or 0 on error
+ */
+static inline u8
+ieee80211_he_oper_size(const u8 *he_oper_ie)
+{
+ const struct ieee80211_he_operation *he_oper = (const void *)he_oper_ie;
+ u8 oper_len = sizeof(struct ieee80211_he_operation);
+ u32 he_oper_params;
+
+ /* Make sure the input is not NULL */
+ if (!he_oper_ie)
+ return 0;
+
+ /* Calc required length */
+ he_oper_params = le32_to_cpu(he_oper->he_oper_params);
+ if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO)
+ oper_len += 3;
+ if (he_oper_params & IEEE80211_HE_OPERATION_CO_HOSTED_BSS)
+ oper_len++;
+ if (he_oper_params & IEEE80211_HE_OPERATION_6GHZ_OP_INFO)
+ oper_len += sizeof(struct ieee80211_he_6ghz_oper);
+
+ /* Add the first byte (extension ID) to the total length */
+ oper_len++;
+
+ return oper_len;
+}
+
+/**
+ * ieee80211_he_6ghz_oper - obtain 6 GHz operation field
+ * @he_oper: HE operation element (must be pre-validated for size)
+ * but may be %NULL
+ *
+ * Return: a pointer to the 6 GHz operation field, or %NULL
+ */
+static inline const struct ieee80211_he_6ghz_oper *
+ieee80211_he_6ghz_oper(const struct ieee80211_he_operation *he_oper)
+{
+ const u8 *ret = (const void *)&he_oper->optional;
+ u32 he_oper_params;
+
+ if (!he_oper)
+ return NULL;
+
+ he_oper_params = le32_to_cpu(he_oper->he_oper_params);
+
+ if (!(he_oper_params & IEEE80211_HE_OPERATION_6GHZ_OP_INFO))
+ return NULL;
+ if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO)
+ ret += 3;
+ if (he_oper_params & IEEE80211_HE_OPERATION_CO_HOSTED_BSS)
+ ret++;
+
+ return (const void *)ret;
+}
+
+/* HE Spatial Reuse defines */
+#define IEEE80211_HE_SPR_PSR_DISALLOWED BIT(0)
+#define IEEE80211_HE_SPR_NON_SRG_OBSS_PD_SR_DISALLOWED BIT(1)
+#define IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT BIT(2)
+#define IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT BIT(3)
+#define IEEE80211_HE_SPR_HESIGA_SR_VAL15_ALLOWED BIT(4)
+
+/*
+ * ieee80211_he_spr_size - calculate 802.11ax HE Spatial Reuse IE size
+ * @he_spr_ie: byte data of the He Spatial Reuse IE, stating from the byte
+ * after the ext ID byte. It is assumed that he_spr_ie has at least
+ * sizeof(struct ieee80211_he_spr) bytes, the caller must have validated
+ * this
+ * @return the actual size of the IE data (not including header), or 0 on error
+ */
+static inline u8
+ieee80211_he_spr_size(const u8 *he_spr_ie)
+{
+ const struct ieee80211_he_spr *he_spr = (const void *)he_spr_ie;
+ u8 spr_len = sizeof(struct ieee80211_he_spr);
+ u8 he_spr_params;
+
+ /* Make sure the input is not NULL */
+ if (!he_spr_ie)
+ return 0;
+
+ /* Calc required length */
+ he_spr_params = he_spr->he_sr_control;
+ if (he_spr_params & IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT)
+ spr_len++;
+ if (he_spr_params & IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT)
+ spr_len += 18;
+
+ /* Add the first byte (extension ID) to the total length */
+ spr_len++;
+
+ return spr_len;
+}
+
+/* S1G Capabilities Information field */
+#define IEEE80211_S1G_CAPABILITY_LEN 15
+
+#define S1G_CAP0_S1G_LONG BIT(0)
+#define S1G_CAP0_SGI_1MHZ BIT(1)
+#define S1G_CAP0_SGI_2MHZ BIT(2)
+#define S1G_CAP0_SGI_4MHZ BIT(3)
+#define S1G_CAP0_SGI_8MHZ BIT(4)
+#define S1G_CAP0_SGI_16MHZ BIT(5)
+#define S1G_CAP0_SUPP_CH_WIDTH GENMASK(7, 6)
+
+#define S1G_SUPP_CH_WIDTH_2 0
+#define S1G_SUPP_CH_WIDTH_4 1
+#define S1G_SUPP_CH_WIDTH_8 2
+#define S1G_SUPP_CH_WIDTH_16 3
+#define S1G_SUPP_CH_WIDTH_MAX(cap) ((1 << FIELD_GET(S1G_CAP0_SUPP_CH_WIDTH, \
+ cap[0])) << 1)
+
+#define S1G_CAP1_RX_LDPC BIT(0)
+#define S1G_CAP1_TX_STBC BIT(1)
+#define S1G_CAP1_RX_STBC BIT(2)
+#define S1G_CAP1_SU_BFER BIT(3)
+#define S1G_CAP1_SU_BFEE BIT(4)
+#define S1G_CAP1_BFEE_STS GENMASK(7, 5)
+
+#define S1G_CAP2_SOUNDING_DIMENSIONS GENMASK(2, 0)
+#define S1G_CAP2_MU_BFER BIT(3)
+#define S1G_CAP2_MU_BFEE BIT(4)
+#define S1G_CAP2_PLUS_HTC_VHT BIT(5)
+#define S1G_CAP2_TRAVELING_PILOT GENMASK(7, 6)
+
+#define S1G_CAP3_RD_RESPONDER BIT(0)
+#define S1G_CAP3_HT_DELAYED_BA BIT(1)
+#define S1G_CAP3_MAX_MPDU_LEN BIT(2)
+#define S1G_CAP3_MAX_AMPDU_LEN_EXP GENMASK(4, 3)
+#define S1G_CAP3_MIN_MPDU_START GENMASK(7, 5)
+
+#define S1G_CAP4_UPLINK_SYNC BIT(0)
+#define S1G_CAP4_DYNAMIC_AID BIT(1)
+#define S1G_CAP4_BAT BIT(2)
+#define S1G_CAP4_TIME_ADE BIT(3)
+#define S1G_CAP4_NON_TIM BIT(4)
+#define S1G_CAP4_GROUP_AID BIT(5)
+#define S1G_CAP4_STA_TYPE GENMASK(7, 6)
+
+#define S1G_CAP5_CENT_AUTH_CONTROL BIT(0)
+#define S1G_CAP5_DIST_AUTH_CONTROL BIT(1)
+#define S1G_CAP5_AMSDU BIT(2)
+#define S1G_CAP5_AMPDU BIT(3)
+#define S1G_CAP5_ASYMMETRIC_BA BIT(4)
+#define S1G_CAP5_FLOW_CONTROL BIT(5)
+#define S1G_CAP5_SECTORIZED_BEAM GENMASK(7, 6)
+
+#define S1G_CAP6_OBSS_MITIGATION BIT(0)
+#define S1G_CAP6_FRAGMENT_BA BIT(1)
+#define S1G_CAP6_NDP_PS_POLL BIT(2)
+#define S1G_CAP6_RAW_OPERATION BIT(3)
+#define S1G_CAP6_PAGE_SLICING BIT(4)
+#define S1G_CAP6_TXOP_SHARING_IMP_ACK BIT(5)
+#define S1G_CAP6_VHT_LINK_ADAPT GENMASK(7, 6)
+
+#define S1G_CAP7_TACK_AS_PS_POLL BIT(0)
+#define S1G_CAP7_DUP_1MHZ BIT(1)
+#define S1G_CAP7_MCS_NEGOTIATION BIT(2)
+#define S1G_CAP7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3)
+#define S1G_CAP7_NDP_BFING_REPORT_POLL BIT(4)
+#define S1G_CAP7_UNSOLICITED_DYN_AID BIT(5)
+#define S1G_CAP7_SECTOR_TRAINING_OPERATION BIT(6)
+#define S1G_CAP7_TEMP_PS_MODE_SWITCH BIT(7)
+
+#define S1G_CAP8_TWT_GROUPING BIT(0)
+#define S1G_CAP8_BDT BIT(1)
+#define S1G_CAP8_COLOR GENMASK(4, 2)
+#define S1G_CAP8_TWT_REQUEST BIT(5)
+#define S1G_CAP8_TWT_RESPOND BIT(6)
+#define S1G_CAP8_PV1_FRAME BIT(7)
+
+#define S1G_CAP9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0)
+
+#define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ BIT(0)
+#define S1G_OPER_CH_WIDTH_OPER GENMASK(4, 1)
+
+/* EHT MAC capabilities as defined in P802.11be_D1.4 section 9.4.2.313.2 */
+#define IEEE80211_EHT_MAC_CAP0_NSEP_PRIO_ACCESS 0x01
+#define IEEE80211_EHT_MAC_CAP0_OM_CONTROL 0x02
+#define IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE1 0x04
+#define IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE2 0x08
+#define IEEE80211_EHT_MAC_CAP0_RESTRICTED_TWT 0x10
+#define IEEE80211_EHT_MAC_CAP0_SCS_TRAFFIC_DESC 0x20
+#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_MASK 0xc0
+#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_3895 0
+#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_7991 1
+#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_11454 2
+
+/* EHT PHY capabilities as defined in P802.11be_D1.4 section 9.4.2.313.3 */
+#define IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ 0x02
+#define IEEE80211_EHT_PHY_CAP0_242_TONE_RU_GT20MHZ 0x04
+#define IEEE80211_EHT_PHY_CAP0_NDP_4_EHT_LFT_32_GI 0x08
+#define IEEE80211_EHT_PHY_CAP0_PARTIAL_BW_UL_MU_MIMO 0x10
+#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMER 0x20
+#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMEE 0x40
+
+/* EHT beamformee number of spatial streams <= 80MHz is split */
+#define IEEE80211_EHT_PHY_CAP0_BEAMFORMEE_SS_80MHZ_MASK 0x80
+#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_80MHZ_MASK 0x03
+
+#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_160MHZ_MASK 0x1c
+#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_320MHZ_MASK 0xe0
+
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_80MHZ_MASK 0x07
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_160MHZ_MASK 0x38
+
+/* EHT number of sounding dimensions for 320MHz is split */
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_320MHZ_MASK 0xc0
+#define IEEE80211_EHT_PHY_CAP3_SOUNDING_DIM_320MHZ_MASK 0x01
+#define IEEE80211_EHT_PHY_CAP3_NG_16_SU_FEEDBACK 0x02
+#define IEEE80211_EHT_PHY_CAP3_NG_16_MU_FEEDBACK 0x04
+#define IEEE80211_EHT_PHY_CAP3_CODEBOOK_4_2_SU_FDBK 0x08
+#define IEEE80211_EHT_PHY_CAP3_CODEBOOK_7_5_MU_FDBK 0x10
+#define IEEE80211_EHT_PHY_CAP3_TRIG_SU_BF_FDBK 0x20
+#define IEEE80211_EHT_PHY_CAP3_TRIG_MU_BF_PART_BW_FDBK 0x40
+#define IEEE80211_EHT_PHY_CAP3_TRIG_CQI_FDBK 0x80
+
+#define IEEE80211_EHT_PHY_CAP4_PART_BW_DL_MU_MIMO 0x01
+#define IEEE80211_EHT_PHY_CAP4_PSR_SR_SUPP 0x02
+#define IEEE80211_EHT_PHY_CAP4_POWER_BOOST_FACT_SUPP 0x04
+#define IEEE80211_EHT_PHY_CAP4_EHT_MU_PPDU_4_EHT_LTF_08_GI 0x08
+#define IEEE80211_EHT_PHY_CAP4_MAX_NC_MASK 0xf0
+
+#define IEEE80211_EHT_PHY_CAP5_NON_TRIG_CQI_FEEDBACK 0x01
+#define IEEE80211_EHT_PHY_CAP5_TX_LESS_242_TONE_RU_SUPP 0x02
+#define IEEE80211_EHT_PHY_CAP5_RX_LESS_242_TONE_RU_SUPP 0x04
+#define IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT 0x08
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_MASK 0x30
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_0US 0
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_8US 1
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_16US 2
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_20US 3
+
+/* Maximum number of supported EHT LTF is split */
+#define IEEE80211_EHT_PHY_CAP5_MAX_NUM_SUPP_EHT_LTF_MASK 0xc0
+#define IEEE80211_EHT_PHY_CAP6_MAX_NUM_SUPP_EHT_LTF_MASK 0x07
+
+#define IEEE80211_EHT_PHY_CAP6_MCS15_SUPP_MASK 0x78
+#define IEEE80211_EHT_PHY_CAP6_EHT_DUP_6GHZ_SUPP 0x80
+
+#define IEEE80211_EHT_PHY_CAP7_20MHZ_STA_RX_NDP_WIDER_BW 0x01
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_80MHZ 0x02
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_160MHZ 0x04
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_320MHZ 0x08
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_80MHZ 0x10
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ 0x20
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_320MHZ 0x40
+#define IEEE80211_EHT_PHY_CAP7_TB_SOUNDING_FDBK_RATE_LIMIT 0x80
+
+#define IEEE80211_EHT_PHY_CAP8_RX_1024QAM_WIDER_BW_DL_OFDMA 0x01
+#define IEEE80211_EHT_PHY_CAP8_RX_4096QAM_WIDER_BW_DL_OFDMA 0x02
+
+/*
+ * EHT operation channel width as defined in P802.11be_D1.4 section 9.4.2.311
+ */
+#define IEEE80211_EHT_OPER_CHAN_WIDTH 0x7
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_20MHZ 0
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_40MHZ 1
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_80MHZ 2
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_160MHZ 3
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_320MHZ 4
+
+/* Calculate 802.11be EHT capabilities IE Tx/Rx EHT MCS NSS Support Field size */
+static inline u8
+ieee80211_eht_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap,
+ const struct ieee80211_eht_cap_elem_fixed *eht_cap)
+{
+ u8 count = 0;
+
+ /* on 2.4 GHz, if it supports 40 MHz, the result is 3 */
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G)
+ return 3;
+
+ /* on 2.4 GHz, these three bits are reserved, so should be 0 */
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G)
+ count += 3;
+
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
+ count += 3;
+
+ if (eht_cap->phy_cap_info[0] & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ)
+ count += 3;
+
+ return count ? count : 4;
+}
+
+/* 802.11be EHT PPE Thresholds */
+#define IEEE80211_EHT_PPE_THRES_NSS_POS 0
+#define IEEE80211_EHT_PPE_THRES_NSS_MASK 0xf
+#define IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK 0x1f0
+#define IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE 3
+#define IEEE80211_EHT_PPE_THRES_INFO_HEADER_SIZE 9
+
+/*
+ * Calculate 802.11be EHT capabilities IE EHT field size
+ */
+static inline u8
+ieee80211_eht_ppe_size(u16 ppe_thres_hdr, const u8 *phy_cap_info)
+{
+ u32 n;
+
+ if (!(phy_cap_info[5] &
+ IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT))
+ return 0;
+
+ n = hweight16(ppe_thres_hdr &
+ IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK);
+ n *= 1 + (ppe_thres_hdr & IEEE80211_EHT_PPE_THRES_NSS_MASK);
+
+ /*
+ * Each pair is 6 bits, and we need to add the 9 "header" bits to the
+ * total size.
+ */
+ n = n * IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE * 2 +
+ IEEE80211_EHT_PPE_THRES_INFO_HEADER_SIZE;
+ return DIV_ROUND_UP(n, 8);
+}
+
+static inline bool
+ieee80211_eht_capa_size_ok(const u8 *he_capa, const u8 *data, u8 len)
+{
+ const struct ieee80211_eht_cap_elem_fixed *elem = (const void *)data;
+ u8 needed = sizeof(struct ieee80211_eht_cap_elem_fixed);
+
+ if (len < needed || !he_capa)
+ return false;
+
+ needed += ieee80211_eht_mcs_nss_size((const void *)he_capa,
+ (const void *)data);
+ if (len < needed)
+ return false;
+
+ if (elem->phy_cap_info[5] &
+ IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT) {
+ u16 ppe_thres_hdr;
+
+ if (len < needed + sizeof(ppe_thres_hdr))
+ return false;
+
+ ppe_thres_hdr = (data[needed] >> 8) + data[needed + 1];
+ needed += ieee80211_eht_ppe_size(ppe_thres_hdr,
+ elem->phy_cap_info);
+ }
+
+ return len >= needed;
+}
+
+static inline bool
+ieee80211_eht_oper_size_ok(const u8 *data, u8 len)
+{
+ const struct ieee80211_eht_operation *elem = (const void *)data;
+ u8 needed = sizeof(*elem);
+
+ if (len < needed)
+ return false;
+
+ if (elem->present_bm & IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)
+ needed += 2;
+
+ return len >= needed;
+}
+
+#define LISTEN_INT_USF GENMASK(15, 14)
+#define LISTEN_INT_UI GENMASK(13, 0)
+
+#define IEEE80211_MAX_USF FIELD_MAX(LISTEN_INT_USF)
+#define IEEE80211_MAX_UI FIELD_MAX(LISTEN_INT_UI)
projects / linux-libre-firmware.git / commitdiff