# For each kver release, start extra with an empty string, then count
# from 1 if changes are needed that require rebuilding the tarball.
-kver=2.6.23 extra=3
+kver=2.6.23 extra=3++
-if unifdef /dev/null; then :; else
- echo unifdef is required >&2
- exit 1
+case $1 in
+--force) die () { echo ERROR: "$@": ignored >&2; }; shift;;
+*) die () { echo "$@" >&2; exit 1; };;
+esac
+
+if unifdef -Utest /dev/null; then :; else
+ die unifdef is required
fi
check=`echo $0 | sed 's,/[^/]*$,,'`/deblob-check
function clean_file {
#$1 = filename
if test ! -f $1; then
- echo $1 does not exist, something is wrong >&2
- exit 1
+ die $1 does not exist, something is wrong
fi
rm -v $1
}
function check_changed {
if test ! -f $1; then
- echo $1 does not exist, something is wrong >&2
- exit 1
+ die $1 does not exist, something is wrong
elif cmp $1.deblob $1 > /dev/null; then
- echo $1 did not change, something is wrong >&2
- exit 1
+ die $1 did not change, something is wrong
fi
mv $1.deblob $1
}
#$1 = filename
if $have_check; then
if test ! -f $1; then
- echo $1 does not exist, something is wrong >&2
- exit 1
+ die $1 does not exist, something is wrong
fi
name=$1
echo Removing blobs from $name
if sed -n "/\\($1\\)/p" $2 | grep . > /dev/null; then
:
else
- echo $2 does not contain matches for $1
- exit 1
+ die $2 does not contain matches for $1
fi
}
function clean_ifdef {
#$1 = filename $2 = macro to -U
echo unifdefing $1 with -U$2
- unifdef $1 -U$2 > $1.deblob
+ unifdef -U$2 $1 > $1.deblob
check_changed $1
}
sound/pci/cs46xx/imgs/cwcdma.asp \
; do
if test ! $f; then
- echo $f is not present, something is amiss >&2
- exit 1
+ die $f is not present, something is amiss
fi
done
clean_mk CONFIG_MYRI_SBUS drivers/net/Makefile
# TIGON3 - Broadcom Tigon3
-patch --no-backup-if-mismatch -p0 <<\EOF # patches/linux-2.6-tg3-clean.patch
+patch --no-backup-if-mismatch --batch -p0 <<\EOF || \
+ die failed to remove license comments from drivers/net/tg3.c \
+ # patches/linux-2.6-tg3-clean.patch
--- drivers/net/tg3.c
+++ drivers/net/tg3.c
@@ -5,14 +5,6 @@
# sed -i '/cs46xx\/ \\/d' sound/pci/Makefile
# SND_KORG1212 - Korg 1212 IO
-clean_ifdef sound/pci/korg1212/korg1212.c CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL
clean_blob sound/pci/korg1212/korg1212-firmware.h
+clean_ifdef sound/pci/korg1212/korg1212.c CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL
+clean_kconfig sound/pci/Kconfig 'SND_KORG1212_FIRMWARE_IN_KERNEL'
# SND_MAESTRO3 - ESS Allegro/Maestro3
clean_ifdef sound/pci/maestro3.c CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL
+clean_kconfig sound/pci/Kconfig 'SND_MAESTRO3_FIRMWARE_IN_KERNEL'
# SND_YMFPCI - Yamaha YMF724/740/744/754
clean_blob sound/pci/ymfpci/ymfpci_image.h
clean_ifdef sound/pci/ymfpci/ymfpci_main.c CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL
+clean_kconfig sound/pci/Kconfig 'SND_YMFPCI_FIRMWARE_IN_KERNEL'
# SND_SB16_CSP_FIRMWARE_IN_KERNEL - SB16 Advanced Signal Processor
clean_blob sound/isa/sb/sb16_csp_codecs.h
-clean_kconfig sound/isa/Kconfig SND_SB16_CSP_FIRMWARE_IN_KERNEL
+clean_kconfig sound/isa/Kconfig 'SND_SB16_CSP_FIRMWARE_IN_KERNEL'
# SND_WAVEFRONT_FIRMWARE_IN_KERNEL
# Most of this file is not matched by deblob-check because of WAIT_IDLE.
# Just remove it.
clean_file sound/isa/wavefront/yss225.c
-clean_kconfig sound/isa/Kconfig SND_WAVEFRONT_FIRMWARE_IN_KERNEL
+clean_kconfig sound/isa/Kconfig 'SND_WAVEFRONT_FIRMWARE_IN_KERNEL'
exit 0