2 * Copyright 2011, Netlogic Microsystems.
3 * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
5 * This file is licensed under the terms of the GNU General Public
6 * License version 2. This program is licensed "as is" without any
7 * warranty of any kind, whether express or implied.
10 #include <linux/device.h>
11 #include <linux/platform_device.h>
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/resource.h>
15 #include <linux/serial_8250.h>
16 #include <linux/serial_reg.h>
17 #include <linux/i2c.h>
18 #include <linux/usb/ehci_pdriver.h>
19 #include <linux/usb/ohci_pdriver.h>
21 #include <asm/netlogic/haldefs.h>
22 #include <asm/netlogic/xlr/iomap.h>
23 #include <asm/netlogic/xlr/pic.h>
24 #include <asm/netlogic/xlr/xlr.h>
26 static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
31 /* sign extend to 64 bits, if needed */
32 uartbase = (uint64_t)(long)p->membase;
33 value = nlm_read_reg(uartbase, offset);
35 /* See XLR/XLS errata */
36 if (offset == UART_MSR)
38 else if (offset == UART_MCR)
44 static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
48 /* sign extend to 64 bits, if needed */
49 uartbase = (uint64_t)(long)p->membase;
51 /* See XLR/XLS errata */
52 if (offset == UART_MSR)
54 else if (offset == UART_MCR)
57 nlm_write_reg(uartbase, offset, value);
64 .iotype = UPIO_MEM32, \
65 .flags = (UPF_SKIP_TEST | \
66 UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
67 .uartclk = PIC_CLK_HZ, \
68 .type = PORT_16550A, \
69 .serial_in = nlm_xlr_uart_in, \
70 .serial_out = nlm_xlr_uart_out, \
73 static struct plat_serial8250_port xlr_uart_data[] = {
79 static struct platform_device uart_device = {
81 .id = PLAT8250_DEV_PLATFORM,
83 .platform_data = xlr_uart_data,
87 static int __init nlm_uart_init(void)
89 unsigned long uartbase;
91 uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
92 xlr_uart_data[0].membase = (void __iomem *)uartbase;
93 xlr_uart_data[0].mapbase = CPHYSADDR(uartbase);
95 uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_1_OFFSET);
96 xlr_uart_data[1].membase = (void __iomem *)uartbase;
97 xlr_uart_data[1].mapbase = CPHYSADDR(uartbase);
99 return platform_device_register(&uart_device);
102 arch_initcall(nlm_uart_init);
105 /* Platform USB devices, only on XLS chips */
106 static u64 xls_usb_dmamask = ~(u32)0;
107 #define USB_PLATFORM_DEV(n, i, irq) \
111 .num_resources = 2, \
113 .dma_mask = &xls_usb_dmamask, \
114 .coherent_dma_mask = 0xffffffff, \
116 .resource = (struct resource[]) { \
118 .flags = IORESOURCE_MEM, \
123 .flags = IORESOURCE_IRQ, \
128 static struct usb_ehci_pdata xls_usb_ehci_pdata = {
132 static struct usb_ohci_pdata xls_usb_ohci_pdata;
134 static struct platform_device xls_usb_ehci_device =
135 USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ);
136 static struct platform_device xls_usb_ohci_device_0 =
137 USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ);
138 static struct platform_device xls_usb_ohci_device_1 =
139 USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ);
141 static struct platform_device *xls_platform_devices[] = {
142 &xls_usb_ehci_device,
143 &xls_usb_ohci_device_0,
144 &xls_usb_ohci_device_1,
147 int xls_platform_usb_init(void)
149 uint64_t usb_mmio, gpio_mmio;
150 unsigned long memres;
153 if (!nlm_chip_is_xls())
156 gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
157 usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_1_OFFSET);
159 /* Clear Rogue Phy INTs */
160 nlm_write_reg(usb_mmio, 49, 0x10000000);
161 /* Enable all interrupts */
162 nlm_write_reg(usb_mmio, 50, 0x1f000000);
165 nlm_write_reg(usb_mmio, 1, 0x07000500);
167 val = nlm_read_reg(gpio_mmio, 21);
168 if (((val >> 22) & 0x01) == 0) {
169 pr_info("Detected USB Device mode - Not supported!\n");
170 nlm_write_reg(usb_mmio, 0, 0x01000000);
174 pr_info("Detected USB Host mode - Adding XLS USB devices.\n");
175 /* Clear reset, host mode */
176 nlm_write_reg(usb_mmio, 0, 0x02000000);
178 /* Memory resource for various XLS usb ports */
179 usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET);
180 memres = CPHYSADDR((unsigned long)usb_mmio);
181 xls_usb_ehci_device.resource[0].start = memres;
182 xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
183 xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata;
186 xls_usb_ohci_device_0.resource[0].start = memres;
187 xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1;
188 xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata;
191 xls_usb_ohci_device_1.resource[0].start = memres;
192 xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1;
193 xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata;
195 return platform_add_devices(xls_platform_devices,
196 ARRAY_SIZE(xls_platform_devices));
199 arch_initcall(xls_platform_usb_init);
203 static struct i2c_board_info nlm_i2c_board_info1[] __initdata = {
204 /* All XLR boards have this RTC and Max6657 Temp Chip */
215 static struct resource i2c_resources[] = {
217 .start = 0, /* filled at init */
219 .flags = IORESOURCE_MEM,
223 static struct platform_device nlm_xlr_i2c_1 = {
224 .name = "xlr-i2cbus",
227 .resource = i2c_resources,
230 static int __init nlm_i2c_init(void)
235 /* I2C bus 0 does not have any useful devices, configure only bus 1 */
236 offset = NETLOGIC_IO_I2C_1_OFFSET;
237 nlm_xlr_i2c_1.resource[0].start = CPHYSADDR(nlm_mmio_base(offset));
238 nlm_xlr_i2c_1.resource[0].end = nlm_xlr_i2c_1.resource[0].start + 0xfff;
240 platform_device_register(&nlm_xlr_i2c_1);
242 err = i2c_register_board_info(1, nlm_i2c_board_info1,
243 ARRAY_SIZE(nlm_i2c_board_info1));
245 pr_err("nlm-i2c: cannot register board I2C devices\n");
249 arch_initcall(nlm_i2c_init);