[releases.git] / xfs_log_cil.c

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2010 Red Hat, Inc. All Rights Reserved.
 */

#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_shared.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_extent_busy.h"
#include "xfs_trans.h"
#include "xfs_trans_priv.h"
#include "xfs_log.h"
#include "xfs_log_priv.h"
#include "xfs_trace.h"
#include "xfs_discard.h"

/*
 * Allocate a new ticket. Failing to get a new ticket makes it really hard to
 * recover, so we don't allow failure here. Also, we allocate in a context that
 * we don't want to be issuing transactions from, so we need to tell the
 * allocation code this as well.
 *
 * We don't reserve any space for the ticket - we are going to steal whatever
 * space we require from transactions as they commit. To ensure we reserve all
 * the space required, we need to set the current reservation of the ticket to
 * zero so that we know to steal the initial transaction overhead from the
 * first transaction commit.
 */
static struct xlog_ticket *
xlog_cil_ticket_alloc(
        struct xlog     *log)
{
        struct xlog_ticket *tic;

        tic = xlog_ticket_alloc(log, 0, 1, 0);

        /*
         * set the current reservation to zero so we know to steal the basic
         * transaction overhead reservation from the first transaction commit.
         */
        tic->t_curr_res = 0;
        tic->t_iclog_hdrs = 0;
        return tic;
}

static inline void
xlog_cil_set_iclog_hdr_count(struct xfs_cil *cil)
{
        struct xlog     *log = cil->xc_log;

        atomic_set(&cil->xc_iclog_hdrs,
                   (XLOG_CIL_BLOCKING_SPACE_LIMIT(log) /
                        (log->l_iclog_size - log->l_iclog_hsize)));
}

/*
 * Check if the current log item was first committed in this sequence.
 * We can't rely on just the log item being in the CIL, we have to check
 * the recorded commit sequence number.
 *
 * Note: for this to be used in a non-racy manner, it has to be called with
 * CIL flushing locked out. As a result, it should only be used during the
 * transaction commit process when deciding what to format into the item.
 */
static bool
xlog_item_in_current_chkpt(
        struct xfs_cil          *cil,
        struct xfs_log_item     *lip)
{
        if (test_bit(XLOG_CIL_EMPTY, &cil->xc_flags))
                return false;

        /*
         * li_seq is written on the first commit of a log item to record the
         * first checkpoint it is written to. Hence if it is different to the
         * current sequence, we're in a new checkpoint.
         */
        return lip->li_seq == READ_ONCE(cil->xc_current_sequence);
}

bool
xfs_log_item_in_current_chkpt(
        struct xfs_log_item *lip)
{
        return xlog_item_in_current_chkpt(lip->li_log->l_cilp, lip);
}

/*
 * Unavoidable forward declaration - xlog_cil_push_work() calls
 * xlog_cil_ctx_alloc() itself.
 */
static void xlog_cil_push_work(struct work_struct *work);

static struct xfs_cil_ctx *
xlog_cil_ctx_alloc(void)
{
        struct xfs_cil_ctx      *ctx;

        ctx = kmem_zalloc(sizeof(*ctx), KM_NOFS);
        INIT_LIST_HEAD(&ctx->committing);
        INIT_LIST_HEAD(&ctx->busy_extents.extent_list);
        INIT_LIST_HEAD(&ctx->log_items);
        INIT_LIST_HEAD(&ctx->lv_chain);
        INIT_WORK(&ctx->push_work, xlog_cil_push_work);
        return ctx;
}

/*
 * Aggregate the CIL per cpu structures into global counts, lists, etc and
 * clear the percpu state ready for the next context to use. This is called
 * from the push code with the context lock held exclusively, hence nothing else
 * will be accessing or modifying the per-cpu counters.
 */
static void
xlog_cil_push_pcp_aggregate(
        struct xfs_cil          *cil,
        struct xfs_cil_ctx      *ctx)
{
        struct xlog_cil_pcp     *cilpcp;
        int                     cpu;

        for_each_cpu(cpu, &ctx->cil_pcpmask) {
                cilpcp = per_cpu_ptr(cil->xc_pcp, cpu);

                ctx->ticket->t_curr_res += cilpcp->space_reserved;
                cilpcp->space_reserved = 0;

                if (!list_empty(&cilpcp->busy_extents)) {
                        list_splice_init(&cilpcp->busy_extents,
                                        &ctx->busy_extents.extent_list);
                }
                if (!list_empty(&cilpcp->log_items))
                        list_splice_init(&cilpcp->log_items, &ctx->log_items);

                /*
                 * We're in the middle of switching cil contexts.  Reset the
                 * counter we use to detect when the current context is nearing
                 * full.
                 */
                cilpcp->space_used = 0;
        }
}

/*
 * Aggregate the CIL per-cpu space used counters into the global atomic value.
 * This is called when the per-cpu counter aggregation will first pass the soft
 * limit threshold so we can switch to atomic counter aggregation for accurate
 * detection of hard limit traversal.
 */
static void
xlog_cil_insert_pcp_aggregate(
        struct xfs_cil          *cil,
        struct xfs_cil_ctx      *ctx)
{
        struct xlog_cil_pcp     *cilpcp;
        int                     cpu;
        int                     count = 0;

        /* Trigger atomic updates then aggregate only for the first caller */
        if (!test_and_clear_bit(XLOG_CIL_PCP_SPACE, &cil->xc_flags))
                return;

        /*
         * We can race with other cpus setting cil_pcpmask.  However, we've
         * atomically cleared PCP_SPACE which forces other threads to add to
         * the global space used count.  cil_pcpmask is a superset of cilpcp
         * structures that could have a nonzero space_used.
         */
        for_each_cpu(cpu, &ctx->cil_pcpmask) {
                int     old, prev;

                cilpcp = per_cpu_ptr(cil->xc_pcp, cpu);
                do {
                        old = cilpcp->space_used;
                        prev = cmpxchg(&cilpcp->space_used, old, 0);
                } while (old != prev);
                count += old;
        }
        atomic_add(count, &ctx->space_used);
}

static void
xlog_cil_ctx_switch(
        struct xfs_cil          *cil,
        struct xfs_cil_ctx      *ctx)
{
        xlog_cil_set_iclog_hdr_count(cil);
        set_bit(XLOG_CIL_EMPTY, &cil->xc_flags);
        set_bit(XLOG_CIL_PCP_SPACE, &cil->xc_flags);
        ctx->sequence = ++cil->xc_current_sequence;
        ctx->cil = cil;
        cil->xc_ctx = ctx;
}

/*
 * After the first stage of log recovery is done, we know where the head and
 * tail of the log are. We need this log initialisation done before we can
 * initialise the first CIL checkpoint context.
 *
 * Here we allocate a log ticket to track space usage during a CIL push.  This
 * ticket is passed to xlog_write() directly so that we don't slowly leak log
 * space by failing to account for space used by log headers and additional
 * region headers for split regions.
 */
void
xlog_cil_init_post_recovery(
        struct xlog     *log)
{
        log->l_cilp->xc_ctx->ticket = xlog_cil_ticket_alloc(log);
        log->l_cilp->xc_ctx->sequence = 1;
        xlog_cil_set_iclog_hdr_count(log->l_cilp);
}

static inline int
xlog_cil_iovec_space(
        uint    niovecs)
{
        return round_up((sizeof(struct xfs_log_vec) +
                                        niovecs * sizeof(struct xfs_log_iovec)),
                        sizeof(uint64_t));
}

/*
 * Allocate or pin log vector buffers for CIL insertion.
 *
 * The CIL currently uses disposable buffers for copying a snapshot of the
 * modified items into the log during a push. The biggest problem with this is
 * the requirement to allocate the disposable buffer during the commit if:
 *      a) does not exist; or
 *      b) it is too small
 *
 * If we do this allocation within xlog_cil_insert_format_items(), it is done
 * under the xc_ctx_lock, which means that a CIL push cannot occur during
 * the memory allocation. This means that we have a potential deadlock situation
 * under low memory conditions when we have lots of dirty metadata pinned in
 * the CIL and we need a CIL commit to occur to free memory.
 *
 * To avoid this, we need to move the memory allocation outside the
 * xc_ctx_lock, but because the log vector buffers are disposable, that opens
 * up a TOCTOU race condition w.r.t. the CIL committing and removing the log
 * vector buffers between the check and the formatting of the item into the
 * log vector buffer within the xc_ctx_lock.
 *
 * Because the log vector buffer needs to be unchanged during the CIL push
 * process, we cannot share the buffer between the transaction commit (which
 * modifies the buffer) and the CIL push context that is writing the changes
 * into the log. This means skipping preallocation of buffer space is
 * unreliable, but we most definitely do not want to be allocating and freeing
 * buffers unnecessarily during commits when overwrites can be done safely.
 *
 * The simplest solution to this problem is to allocate a shadow buffer when a
 * log item is committed for the second time, and then to only use this buffer
 * if necessary. The buffer can remain attached to the log item until such time
 * it is needed, and this is the buffer that is reallocated to match the size of
 * the incoming modification. Then during the formatting of the item we can swap
 * the active buffer with the new one if we can't reuse the existing buffer. We
 * don't free the old buffer as it may be reused on the next modification if
 * it's size is right, otherwise we'll free and reallocate it at that point.
 *
 * This function builds a vector for the changes in each log item in the
 * transaction. It then works out the length of the buffer needed for each log
 * item, allocates them and attaches the vector to the log item in preparation
 * for the formatting step which occurs under the xc_ctx_lock.
 *
 * While this means the memory footprint goes up, it avoids the repeated
 * alloc/free pattern that repeated modifications of an item would otherwise
 * cause, and hence minimises the CPU overhead of such behaviour.
 */
static void
xlog_cil_alloc_shadow_bufs(
        struct xlog             *log,
        struct xfs_trans        *tp)
{
        struct xfs_log_item     *lip;

        list_for_each_entry(lip, &tp->t_items, li_trans) {
                struct xfs_log_vec *lv;
                int     niovecs = 0;
                int     nbytes = 0;
                int     buf_size;
                bool    ordered = false;

                /* Skip items which aren't dirty in this transaction. */
                if (!test_bit(XFS_LI_DIRTY, &lip->li_flags))
                        continue;

                /* get number of vecs and size of data to be stored */
                lip->li_ops->iop_size(lip, &niovecs, &nbytes);

                /*
                 * Ordered items need to be tracked but we do not wish to write
                 * them. We need a logvec to track the object, but we do not
                 * need an iovec or buffer to be allocated for copying data.
                 */
                if (niovecs == XFS_LOG_VEC_ORDERED) {
                        ordered = true;
                        niovecs = 0;
                        nbytes = 0;
                }

                /*
                 * We 64-bit align the length of each iovec so that the start of
                 * the next one is naturally aligned.  We'll need to account for
                 * that slack space here.
                 *
                 * We also add the xlog_op_header to each region when
                 * formatting, but that's not accounted to the size of the item
                 * at this point. Hence we'll need an addition number of bytes
                 * for each vector to hold an opheader.
                 *
                 * Then round nbytes up to 64-bit alignment so that the initial
                 * buffer alignment is easy to calculate and verify.
                 */
                nbytes += niovecs *
                        (sizeof(uint64_t) + sizeof(struct xlog_op_header));
                nbytes = round_up(nbytes, sizeof(uint64_t));

                /*
                 * The data buffer needs to start 64-bit aligned, so round up
                 * that space to ensure we can align it appropriately and not
                 * overrun the buffer.
                 */
                buf_size = nbytes + xlog_cil_iovec_space(niovecs);

                /*
                 * if we have no shadow buffer, or it is too small, we need to
                 * reallocate it.
                 */
                if (!lip->li_lv_shadow ||
                    buf_size > lip->li_lv_shadow->lv_size) {
                        /*
                         * We free and allocate here as a realloc would copy
                         * unnecessary data. We don't use kvzalloc() for the
                         * same reason - we don't need to zero the data area in
                         * the buffer, only the log vector header and the iovec
                         * storage.
                         */
                        kmem_free(lip->li_lv_shadow);
                        lv = xlog_kvmalloc(buf_size);

                        memset(lv, 0, xlog_cil_iovec_space(niovecs));

                        INIT_LIST_HEAD(&lv->lv_list);
                        lv->lv_item = lip;
                        lv->lv_size = buf_size;
                        if (ordered)
                                lv->lv_buf_len = XFS_LOG_VEC_ORDERED;
                        else
                                lv->lv_iovecp = (struct xfs_log_iovec *)&lv[1];
                        lip->li_lv_shadow = lv;
                } else {
                        /* same or smaller, optimise common overwrite case */
                        lv = lip->li_lv_shadow;
                        if (ordered)
                                lv->lv_buf_len = XFS_LOG_VEC_ORDERED;
                        else
                                lv->lv_buf_len = 0;
                        lv->lv_bytes = 0;
                }

                /* Ensure the lv is set up according to ->iop_size */
                lv->lv_niovecs = niovecs;

                /* The allocated data region lies beyond the iovec region */
                lv->lv_buf = (char *)lv + xlog_cil_iovec_space(niovecs);
        }

}

/*
 * Prepare the log item for insertion into the CIL. Calculate the difference in
 * log space it will consume, and if it is a new item pin it as well.
 */
STATIC void
xfs_cil_prepare_item(
        struct xlog             *log,
        struct xfs_log_vec      *lv,
        struct xfs_log_vec      *old_lv,
        int                     *diff_len)
{
        /* Account for the new LV being passed in */
        if (lv->lv_buf_len != XFS_LOG_VEC_ORDERED)
                *diff_len += lv->lv_bytes;

        /*
         * If there is no old LV, this is the first time we've seen the item in
         * this CIL context and so we need to pin it. If we are replacing the
         * old_lv, then remove the space it accounts for and make it the shadow
         * buffer for later freeing. In both cases we are now switching to the
         * shadow buffer, so update the pointer to it appropriately.
         */
        if (!old_lv) {
                if (lv->lv_item->li_ops->iop_pin)
                        lv->lv_item->li_ops->iop_pin(lv->lv_item);
                lv->lv_item->li_lv_shadow = NULL;
        } else if (old_lv != lv) {
                ASSERT(lv->lv_buf_len != XFS_LOG_VEC_ORDERED);

                *diff_len -= old_lv->lv_bytes;
                lv->lv_item->li_lv_shadow = old_lv;
        }

        /* attach new log vector to log item */
        lv->lv_item->li_lv = lv;

        /*
         * If this is the first time the item is being committed to the
         * CIL, store the sequence number on the log item so we can
         * tell in future commits whether this is the first checkpoint
         * the item is being committed into.
         */
        if (!lv->lv_item->li_seq)
                lv->lv_item->li_seq = log->l_cilp->xc_ctx->sequence;
}

/*
 * Format log item into a flat buffers
 *
 * For delayed logging, we need to hold a formatted buffer containing all the
 * changes on the log item. This enables us to relog the item in memory and
 * write it out asynchronously without needing to relock the object that was
 * modified at the time it gets written into the iclog.
 *
 * This function takes the prepared log vectors attached to each log item, and
 * formats the changes into the log vector buffer. The buffer it uses is
 * dependent on the current state of the vector in the CIL - the shadow lv is
 * guaranteed to be large enough for the current modification, but we will only
 * use that if we can't reuse the existing lv. If we can't reuse the existing
 * lv, then simple swap it out for the shadow lv. We don't free it - that is
 * done lazily either by th enext modification or the freeing of the log item.
 *
 * We don't set up region headers during this process; we simply copy the
 * regions into the flat buffer. We can do this because we still have to do a
 * formatting step to write the regions into the iclog buffer.  Writing the
 * ophdrs during the iclog write means that we can support splitting large
 * regions across iclog boundares without needing a change in the format of the
 * item/region encapsulation.
 *
 * Hence what we need to do now is change the rewrite the vector array to point
 * to the copied region inside the buffer we just allocated. This allows us to
 * format the regions into the iclog as though they are being formatted
 * directly out of the objects themselves.
 */
static void
xlog_cil_insert_format_items(
        struct xlog             *log,
        struct xfs_trans        *tp,
        int                     *diff_len)
{
        struct xfs_log_item     *lip;

        /* Bail out if we didn't find a log item.  */
        if (list_empty(&tp->t_items)) {
                ASSERT(0);
                return;
        }

        list_for_each_entry(lip, &tp->t_items, li_trans) {
                struct xfs_log_vec *lv;
                struct xfs_log_vec *old_lv = NULL;
                struct xfs_log_vec *shadow;
                bool    ordered = false;

                /* Skip items which aren't dirty in this transaction. */
                if (!test_bit(XFS_LI_DIRTY, &lip->li_flags))
                        continue;

                /*
                 * The formatting size information is already attached to
                 * the shadow lv on the log item.
                 */
                shadow = lip->li_lv_shadow;
                if (shadow->lv_buf_len == XFS_LOG_VEC_ORDERED)
                        ordered = true;

                /* Skip items that do not have any vectors for writing */
                if (!shadow->lv_niovecs && !ordered)
                        continue;

                /* compare to existing item size */
                old_lv = lip->li_lv;
                if (lip->li_lv && shadow->lv_size <= lip->li_lv->lv_size) {
                        /* same or smaller, optimise common overwrite case */
                        lv = lip->li_lv;

                        if (ordered)
                                goto insert;

                        /*
                         * set the item up as though it is a new insertion so
                         * that the space reservation accounting is correct.
                         */
                        *diff_len -= lv->lv_bytes;

                        /* Ensure the lv is set up according to ->iop_size */
                        lv->lv_niovecs = shadow->lv_niovecs;

                        /* reset the lv buffer information for new formatting */
                        lv->lv_buf_len = 0;
                        lv->lv_bytes = 0;
                        lv->lv_buf = (char *)lv +
                                        xlog_cil_iovec_space(lv->lv_niovecs);
                } else {
                        /* switch to shadow buffer! */
                        lv = shadow;
                        lv->lv_item = lip;
                        if (ordered) {
                                /* track as an ordered logvec */
                                ASSERT(lip->li_lv == NULL);
                                goto insert;
                        }
                }

                ASSERT(IS_ALIGNED((unsigned long)lv->lv_buf, sizeof(uint64_t)));
                lip->li_ops->iop_format(lip, lv);
insert:
                xfs_cil_prepare_item(log, lv, old_lv, diff_len);
        }
}

/*
 * The use of lockless waitqueue_active() requires that the caller has
 * serialised itself against the wakeup call in xlog_cil_push_work(). That
 * can be done by either holding the push lock or the context lock.
 */
static inline bool
xlog_cil_over_hard_limit(
        struct xlog     *log,
        int32_t         space_used)
{
        if (waitqueue_active(&log->l_cilp->xc_push_wait))
                return true;
        if (space_used >= XLOG_CIL_BLOCKING_SPACE_LIMIT(log))
                return true;
        return false;
}

/*
 * Insert the log items into the CIL and calculate the difference in space
 * consumed by the item. Add the space to the checkpoint ticket and calculate
 * if the change requires additional log metadata. If it does, take that space
 * as well. Remove the amount of space we added to the checkpoint ticket from
 * the current transaction ticket so that the accounting works out correctly.
 */
static void
xlog_cil_insert_items(
        struct xlog             *log,
        struct xfs_trans        *tp,
        uint32_t                released_space)
{
        struct xfs_cil          *cil = log->l_cilp;
        struct xfs_cil_ctx      *ctx = cil->xc_ctx;
        struct xfs_log_item     *lip;
        int                     len = 0;
        int                     iovhdr_res = 0, split_res = 0, ctx_res = 0;
        int                     space_used;
        int                     order;
        unsigned int            cpu_nr;
        struct xlog_cil_pcp     *cilpcp;

        ASSERT(tp);

        /*
         * We can do this safely because the context can't checkpoint until we
         * are done so it doesn't matter exactly how we update the CIL.
         */
        xlog_cil_insert_format_items(log, tp, &len);

        /*
         * Subtract the space released by intent cancelation from the space we
         * consumed so that we remove it from the CIL space and add it back to
         * the current transaction reservation context.
         */
        len -= released_space;

        /*
         * Grab the per-cpu pointer for the CIL before we start any accounting.
         * That ensures that we are running with pre-emption disabled and so we
         * can't be scheduled away between split sample/update operations that
         * are done without outside locking to serialise them.
         */
        cpu_nr = get_cpu();
        cilpcp = this_cpu_ptr(cil->xc_pcp);

        /* Tell the future push that there was work added by this CPU. */
        if (!cpumask_test_cpu(cpu_nr, &ctx->cil_pcpmask))
                cpumask_test_and_set_cpu(cpu_nr, &ctx->cil_pcpmask);

        /*
         * We need to take the CIL checkpoint unit reservation on the first
         * commit into the CIL. Test the XLOG_CIL_EMPTY bit first so we don't
         * unnecessarily do an atomic op in the fast path here. We can clear the
         * XLOG_CIL_EMPTY bit as we are under the xc_ctx_lock here and that
         * needs to be held exclusively to reset the XLOG_CIL_EMPTY bit.
         */
        if (test_bit(XLOG_CIL_EMPTY, &cil->xc_flags) &&
            test_and_clear_bit(XLOG_CIL_EMPTY, &cil->xc_flags))
                ctx_res = ctx->ticket->t_unit_res;

        /*
         * Check if we need to steal iclog headers. atomic_read() is not a
         * locked atomic operation, so we can check the value before we do any
         * real atomic ops in the fast path. If we've already taken the CIL unit
         * reservation from this commit, we've already got one iclog header
         * space reserved so we have to account for that otherwise we risk
         * overrunning the reservation on this ticket.
         *
         * If the CIL is already at the hard limit, we might need more header
         * space that originally reserved. So steal more header space from every
         * commit that occurs once we are over the hard limit to ensure the CIL
         * push won't run out of reservation space.
         *
         * This can steal more than we need, but that's OK.
         *
         * The cil->xc_ctx_lock provides the serialisation necessary for safely
         * calling xlog_cil_over_hard_limit() in this context.
         */
        space_used = atomic_read(&ctx->space_used) + cilpcp->space_used + len;
        if (atomic_read(&cil->xc_iclog_hdrs) > 0 ||
            xlog_cil_over_hard_limit(log, space_used)) {
                split_res = log->l_iclog_hsize +
                                        sizeof(struct xlog_op_header);
                if (ctx_res)
                        ctx_res += split_res * (tp->t_ticket->t_iclog_hdrs - 1);
                else
                        ctx_res = split_res * tp->t_ticket->t_iclog_hdrs;
                atomic_sub(tp->t_ticket->t_iclog_hdrs, &cil->xc_iclog_hdrs);
        }
        cilpcp->space_reserved += ctx_res;

        /*
         * Accurately account when over the soft limit, otherwise fold the
         * percpu count into the global count if over the per-cpu threshold.
         */
        if (!test_bit(XLOG_CIL_PCP_SPACE, &cil->xc_flags)) {
                atomic_add(len, &ctx->space_used);
        } else if (cilpcp->space_used + len >
                        (XLOG_CIL_SPACE_LIMIT(log) / num_online_cpus())) {
                space_used = atomic_add_return(cilpcp->space_used + len,
                                                &ctx->space_used);
                cilpcp->space_used = 0;

                /*
                 * If we just transitioned over the soft limit, we need to
                 * transition to the global atomic counter.
                 */
                if (space_used >= XLOG_CIL_SPACE_LIMIT(log))
                        xlog_cil_insert_pcp_aggregate(cil, ctx);
        } else {
                cilpcp->space_used += len;
        }
        /* attach the transaction to the CIL if it has any busy extents */
        if (!list_empty(&tp->t_busy))
                list_splice_init(&tp->t_busy, &cilpcp->busy_extents);

        /*
         * Now update the order of everything modified in the transaction
         * and insert items into the CIL if they aren't already there.
         * We do this here so we only need to take the CIL lock once during
         * the transaction commit.
         */
        order = atomic_inc_return(&ctx->order_id);
        list_for_each_entry(lip, &tp->t_items, li_trans) {
                /* Skip items which aren't dirty in this transaction. */
                if (!test_bit(XFS_LI_DIRTY, &lip->li_flags))
                        continue;

                lip->li_order_id = order;
                if (!list_empty(&lip->li_cil))
                        continue;
                list_add_tail(&lip->li_cil, &cilpcp->log_items);
        }
        put_cpu();

        /*
         * If we've overrun the reservation, dump the tx details before we move
         * the log items. Shutdown is imminent...
         */
        tp->t_ticket->t_curr_res -= ctx_res + len;
        if (WARN_ON(tp->t_ticket->t_curr_res < 0)) {
                xfs_warn(log->l_mp, "Transaction log reservation overrun:");
                xfs_warn(log->l_mp,
                         "  log items: %d bytes (iov hdrs: %d bytes)",
                         len, iovhdr_res);
                xfs_warn(log->l_mp, "  split region headers: %d bytes",
                         split_res);
                xfs_warn(log->l_mp, "  ctx ticket: %d bytes", ctx_res);
                xlog_print_trans(tp);
                xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR);
        }
}

static void
xlog_cil_free_logvec(
        struct list_head        *lv_chain)
{
        struct xfs_log_vec      *lv;

        while (!list_empty(lv_chain)) {
                lv = list_first_entry(lv_chain, struct xfs_log_vec, lv_list);
                list_del_init(&lv->lv_list);
                kmem_free(lv);
        }
}

/*
 * Mark all items committed and clear busy extents. We free the log vector
 * chains in a separate pass so that we unpin the log items as quickly as
 * possible.
 */
static void
xlog_cil_committed(
        struct xfs_cil_ctx      *ctx)
{
        struct xfs_mount        *mp = ctx->cil->xc_log->l_mp;
        bool                    abort = xlog_is_shutdown(ctx->cil->xc_log);

        /*
         * If the I/O failed, we're aborting the commit and already shutdown.
         * Wake any commit waiters before aborting the log items so we don't
         * block async log pushers on callbacks. Async log pushers explicitly do
         * not wait on log force completion because they may be holding locks
         * required to unpin items.
         */
        if (abort) {
                spin_lock(&ctx->cil->xc_push_lock);
                wake_up_all(&ctx->cil->xc_start_wait);
                wake_up_all(&ctx->cil->xc_commit_wait);
                spin_unlock(&ctx->cil->xc_push_lock);
        }

        xfs_trans_committed_bulk(ctx->cil->xc_log->l_ailp, &ctx->lv_chain,
                                        ctx->start_lsn, abort);

        xfs_extent_busy_sort(&ctx->busy_extents.extent_list);
        xfs_extent_busy_clear(mp, &ctx->busy_extents.extent_list,
                              xfs_has_discard(mp) && !abort);

        spin_lock(&ctx->cil->xc_push_lock);
        list_del(&ctx->committing);
        spin_unlock(&ctx->cil->xc_push_lock);

        xlog_cil_free_logvec(&ctx->lv_chain);

        if (!list_empty(&ctx->busy_extents.extent_list)) {
                ctx->busy_extents.mount = mp;
                ctx->busy_extents.owner = ctx;
                xfs_discard_extents(mp, &ctx->busy_extents);
                return;
        }

        kmem_free(ctx);
}

void
xlog_cil_process_committed(
        struct list_head        *list)
{
        struct xfs_cil_ctx      *ctx;

        while ((ctx = list_first_entry_or_null(list,
                        struct xfs_cil_ctx, iclog_entry))) {
                list_del(&ctx->iclog_entry);
                xlog_cil_committed(ctx);
        }
}

/*
* Record the LSN of the iclog we were just granted space to start writing into.
* If the context doesn't have a start_lsn recorded, then this iclog will
* contain the start record for the checkpoint. Otherwise this write contains
* the commit record for the checkpoint.
*/
void
xlog_cil_set_ctx_write_state(
        struct xfs_cil_ctx      *ctx,
        struct xlog_in_core     *iclog)
{
        struct xfs_cil          *cil = ctx->cil;
        xfs_lsn_t               lsn = be64_to_cpu(iclog->ic_header.h_lsn);

        ASSERT(!ctx->commit_lsn);
        if (!ctx->start_lsn) {
                spin_lock(&cil->xc_push_lock);
                /*
                 * The LSN we need to pass to the log items on transaction
                 * commit is the LSN reported by the first log vector write, not
                 * the commit lsn. If we use the commit record lsn then we can
                 * move the grant write head beyond the tail LSN and overwrite
                 * it.
                 */
                ctx->start_lsn = lsn;
                wake_up_all(&cil->xc_start_wait);
                spin_unlock(&cil->xc_push_lock);

                /*
                 * Make sure the metadata we are about to overwrite in the log
                 * has been flushed to stable storage before this iclog is
                 * issued.
                 */
                spin_lock(&cil->xc_log->l_icloglock);
                iclog->ic_flags |= XLOG_ICL_NEED_FLUSH;
                spin_unlock(&cil->xc_log->l_icloglock);
                return;
        }

        /*
         * Take a reference to the iclog for the context so that we still hold
         * it when xlog_write is done and has released it. This means the
         * context controls when the iclog is released for IO.
         */
        atomic_inc(&iclog->ic_refcnt);

        /*
         * xlog_state_get_iclog_space() guarantees there is enough space in the
         * iclog for an entire commit record, so we can attach the context
         * callbacks now.  This needs to be done before we make the commit_lsn
         * visible to waiters so that checkpoints with commit records in the
         * same iclog order their IO completion callbacks in the same order that
         * the commit records appear in the iclog.
         */
        spin_lock(&cil->xc_log->l_icloglock);
        list_add_tail(&ctx->iclog_entry, &iclog->ic_callbacks);
        spin_unlock(&cil->xc_log->l_icloglock);

        /*
         * Now we can record the commit LSN and wake anyone waiting for this
         * sequence to have the ordered commit record assigned to a physical
         * location in the log.
         */
        spin_lock(&cil->xc_push_lock);
        ctx->commit_iclog = iclog;
        ctx->commit_lsn = lsn;
        wake_up_all(&cil->xc_commit_wait);
        spin_unlock(&cil->xc_push_lock);
}


/*
 * Ensure that the order of log writes follows checkpoint sequence order. This
 * relies on the context LSN being zero until the log write has guaranteed the
 * LSN that the log write will start at via xlog_state_get_iclog_space().
 */
enum _record_type {
        _START_RECORD,
        _COMMIT_RECORD,
};

static int
xlog_cil_order_write(
        struct xfs_cil          *cil,
        xfs_csn_t               sequence,
        enum _record_type       record)
{
        struct xfs_cil_ctx      *ctx;

restart:
        spin_lock(&cil->xc_push_lock);
        list_for_each_entry(ctx, &cil->xc_committing, committing) {
                /*
                 * Avoid getting stuck in this loop because we were woken by the
                 * shutdown, but then went back to sleep once already in the
                 * shutdown state.
                 */
                if (xlog_is_shutdown(cil->xc_log)) {
                        spin_unlock(&cil->xc_push_lock);
                        return -EIO;
                }

                /*
                 * Higher sequences will wait for this one so skip them.
                 * Don't wait for our own sequence, either.
                 */
                if (ctx->sequence >= sequence)
                        continue;

                /* Wait until the LSN for the record has been recorded. */
                switch (record) {
                case _START_RECORD:
                        if (!ctx->start_lsn) {
                                xlog_wait(&cil->xc_start_wait, &cil->xc_push_lock);
                                goto restart;
                        }
                        break;
                case _COMMIT_RECORD:
                        if (!ctx->commit_lsn) {
                                xlog_wait(&cil->xc_commit_wait, &cil->xc_push_lock);
                                goto restart;
                        }
                        break;
                }
        }
        spin_unlock(&cil->xc_push_lock);
        return 0;
}

/*
 * Write out the log vector change now attached to the CIL context. This will
 * write a start record that needs to be strictly ordered in ascending CIL
 * sequence order so that log recovery will always use in-order start LSNs when
 * replaying checkpoints.
 */
static int
xlog_cil_write_chain(
        struct xfs_cil_ctx      *ctx,
        uint32_t                chain_len)
{
        struct xlog             *log = ctx->cil->xc_log;
        int                     error;

        error = xlog_cil_order_write(ctx->cil, ctx->sequence, _START_RECORD);
        if (error)
                return error;
        return xlog_write(log, ctx, &ctx->lv_chain, ctx->ticket, chain_len);
}

/*
 * Write out the commit record of a checkpoint transaction to close off a
 * running log write. These commit records are strictly ordered in ascending CIL
 * sequence order so that log recovery will always replay the checkpoints in the
 * correct order.
 */
static int
xlog_cil_write_commit_record(
        struct xfs_cil_ctx      *ctx)
{
        struct xlog             *log = ctx->cil->xc_log;
        struct xlog_op_header   ophdr = {
                .oh_clientid = XFS_TRANSACTION,
                .oh_tid = cpu_to_be32(ctx->ticket->t_tid),
                .oh_flags = XLOG_COMMIT_TRANS,
        };
        struct xfs_log_iovec    reg = {
                .i_addr = &ophdr,
                .i_len = sizeof(struct xlog_op_header),
                .i_type = XLOG_REG_TYPE_COMMIT,
        };
        struct xfs_log_vec      vec = {
                .lv_niovecs = 1,
                .lv_iovecp = &reg,
        };
        int                     error;
        LIST_HEAD(lv_chain);
        list_add(&vec.lv_list, &lv_chain);

        if (xlog_is_shutdown(log))
                return -EIO;

        error = xlog_cil_order_write(ctx->cil, ctx->sequence, _COMMIT_RECORD);
        if (error)
                return error;

        /* account for space used by record data */
        ctx->ticket->t_curr_res -= reg.i_len;
        error = xlog_write(log, ctx, &lv_chain, ctx->ticket, reg.i_len);
        if (error)
                xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR);
        return error;
}

struct xlog_cil_trans_hdr {
        struct xlog_op_header   oph[2];
        struct xfs_trans_header thdr;
        struct xfs_log_iovec    lhdr[2];
};

/*
 * Build a checkpoint transaction header to begin the journal transaction.  We
 * need to account for the space used by the transaction header here as it is
 * not accounted for in xlog_write().
 *
 * This is the only place we write a transaction header, so we also build the
 * log opheaders that indicate the start of a log transaction and wrap the
 * transaction header. We keep the start record in it's own log vector rather
 * than compacting them into a single region as this ends up making the logic
 * in xlog_write() for handling empty opheaders for start, commit and unmount
 * records much simpler.
 */
static void
xlog_cil_build_trans_hdr(
        struct xfs_cil_ctx      *ctx,
        struct xlog_cil_trans_hdr *hdr,
        struct xfs_log_vec      *lvhdr,
        int                     num_iovecs)
{
        struct xlog_ticket      *tic = ctx->ticket;
        __be32                  tid = cpu_to_be32(tic->t_tid);

        memset(hdr, 0, sizeof(*hdr));

        /* Log start record */
        hdr->oph[0].oh_tid = tid;
        hdr->oph[0].oh_clientid = XFS_TRANSACTION;
        hdr->oph[0].oh_flags = XLOG_START_TRANS;

        /* log iovec region pointer */
        hdr->lhdr[0].i_addr = &hdr->oph[0];
        hdr->lhdr[0].i_len = sizeof(struct xlog_op_header);
        hdr->lhdr[0].i_type = XLOG_REG_TYPE_LRHEADER;

        /* log opheader */
        hdr->oph[1].oh_tid = tid;
        hdr->oph[1].oh_clientid = XFS_TRANSACTION;
        hdr->oph[1].oh_len = cpu_to_be32(sizeof(struct xfs_trans_header));

        /* transaction header in host byte order format */
        hdr->thdr.th_magic = XFS_TRANS_HEADER_MAGIC;
        hdr->thdr.th_type = XFS_TRANS_CHECKPOINT;
        hdr->thdr.th_tid = tic->t_tid;
        hdr->thdr.th_num_items = num_iovecs;

        /* log iovec region pointer */
        hdr->lhdr[1].i_addr = &hdr->oph[1];
        hdr->lhdr[1].i_len = sizeof(struct xlog_op_header) +
                                sizeof(struct xfs_trans_header);
        hdr->lhdr[1].i_type = XLOG_REG_TYPE_TRANSHDR;

        lvhdr->lv_niovecs = 2;
        lvhdr->lv_iovecp = &hdr->lhdr[0];
        lvhdr->lv_bytes = hdr->lhdr[0].i_len + hdr->lhdr[1].i_len;

        tic->t_curr_res -= lvhdr->lv_bytes;
}

/*
 * CIL item reordering compare function. We want to order in ascending ID order,
 * but we want to leave items with the same ID in the order they were added to
 * the list. This is important for operations like reflink where we log 4 order
 * dependent intents in a single transaction when we overwrite an existing
 * shared extent with a new shared extent. i.e. BUI(unmap), CUI(drop),
 * CUI (inc), BUI(remap)...
 */
static int
xlog_cil_order_cmp(
        void                    *priv,
        const struct list_head  *a,
        const struct list_head  *b)
{
        struct xfs_log_vec      *l1 = container_of(a, struct xfs_log_vec, lv_list);
        struct xfs_log_vec      *l2 = container_of(b, struct xfs_log_vec, lv_list);

        return l1->lv_order_id > l2->lv_order_id;
}

/*
 * Pull all the log vectors off the items in the CIL, and remove the items from
 * the CIL. We don't need the CIL lock here because it's only needed on the
 * transaction commit side which is currently locked out by the flush lock.
 *
 * If a log item is marked with a whiteout, we do not need to write it to the
 * journal and so we just move them to the whiteout list for the caller to
 * dispose of appropriately.
 */
static void
xlog_cil_build_lv_chain(
        struct xfs_cil_ctx      *ctx,
        struct list_head        *whiteouts,
        uint32_t                *num_iovecs,
        uint32_t                *num_bytes)
{
        while (!list_empty(&ctx->log_items)) {
                struct xfs_log_item     *item;
                struct xfs_log_vec      *lv;

                item = list_first_entry(&ctx->log_items,
                                        struct xfs_log_item, li_cil);

                if (test_bit(XFS_LI_WHITEOUT, &item->li_flags)) {
                        list_move(&item->li_cil, whiteouts);
                        trace_xfs_cil_whiteout_skip(item);
                        continue;
                }

                lv = item->li_lv;
                lv->lv_order_id = item->li_order_id;

                /* we don't write ordered log vectors */
                if (lv->lv_buf_len != XFS_LOG_VEC_ORDERED)
                        *num_bytes += lv->lv_bytes;
                *num_iovecs += lv->lv_niovecs;
                list_add_tail(&lv->lv_list, &ctx->lv_chain);

                list_del_init(&item->li_cil);
                item->li_order_id = 0;
                item->li_lv = NULL;
        }
}

static void
xlog_cil_cleanup_whiteouts(
        struct list_head        *whiteouts)
{
        while (!list_empty(whiteouts)) {
                struct xfs_log_item *item = list_first_entry(whiteouts,
                                                struct xfs_log_item, li_cil);
                list_del_init(&item->li_cil);
                trace_xfs_cil_whiteout_unpin(item);
                item->li_ops->iop_unpin(item, 1);
        }
}

/*
 * Push the Committed Item List to the log.
 *
 * If the current sequence is the same as xc_push_seq we need to do a flush. If
 * xc_push_seq is less than the current sequence, then it has already been
 * flushed and we don't need to do anything - the caller will wait for it to
 * complete if necessary.
 *
 * xc_push_seq is checked unlocked against the sequence number for a match.
 * Hence we can allow log forces to run racily and not issue pushes for the
 * same sequence twice.  If we get a race between multiple pushes for the same
 * sequence they will block on the first one and then abort, hence avoiding
 * needless pushes.
 */
static void
xlog_cil_push_work(
        struct work_struct      *work)
{
        struct xfs_cil_ctx      *ctx =
                container_of(work, struct xfs_cil_ctx, push_work);
        struct xfs_cil          *cil = ctx->cil;
        struct xlog             *log = cil->xc_log;
        struct xfs_cil_ctx      *new_ctx;
        int                     num_iovecs = 0;
        int                     num_bytes = 0;
        int                     error = 0;
        struct xlog_cil_trans_hdr thdr;
        struct xfs_log_vec      lvhdr = {};
        xfs_csn_t               push_seq;
        bool                    push_commit_stable;
        LIST_HEAD               (whiteouts);
        struct xlog_ticket      *ticket;

        new_ctx = xlog_cil_ctx_alloc();
        new_ctx->ticket = xlog_cil_ticket_alloc(log);

        down_write(&cil->xc_ctx_lock);

        spin_lock(&cil->xc_push_lock);
        push_seq = cil->xc_push_seq;
        ASSERT(push_seq <= ctx->sequence);
        push_commit_stable = cil->xc_push_commit_stable;
        cil->xc_push_commit_stable = false;

        /*
         * As we are about to switch to a new, empty CIL context, we no longer
         * need to throttle tasks on CIL space overruns. Wake any waiters that
         * the hard push throttle may have caught so they can start committing
         * to the new context. The ctx->xc_push_lock provides the serialisation
         * necessary for safely using the lockless waitqueue_active() check in
         * this context.
         */
        if (waitqueue_active(&cil->xc_push_wait))
                wake_up_all(&cil->xc_push_wait);

        xlog_cil_push_pcp_aggregate(cil, ctx);

        /*
         * Check if we've anything to push. If there is nothing, then we don't
         * move on to a new sequence number and so we have to be able to push
         * this sequence again later.
         */
        if (test_bit(XLOG_CIL_EMPTY, &cil->xc_flags)) {
                cil->xc_push_seq = 0;
                spin_unlock(&cil->xc_push_lock);
                goto out_skip;
        }


        /* check for a previously pushed sequence */
        if (push_seq < ctx->sequence) {
                spin_unlock(&cil->xc_push_lock);
                goto out_skip;
        }

        /*
         * We are now going to push this context, so add it to the committing
         * list before we do anything else. This ensures that anyone waiting on
         * this push can easily detect the difference between a "push in
         * progress" and "CIL is empty, nothing to do".
         *
         * IOWs, a wait loop can now check for:
         *      the current sequence not being found on the committing list;
         *      an empty CIL; and
         *      an unchanged sequence number
         * to detect a push that had nothing to do and therefore does not need
         * waiting on. If the CIL is not empty, we get put on the committing
         * list before emptying the CIL and bumping the sequence number. Hence
         * an empty CIL and an unchanged sequence number means we jumped out
         * above after doing nothing.
         *
         * Hence the waiter will either find the commit sequence on the
         * committing list or the sequence number will be unchanged and the CIL
         * still dirty. In that latter case, the push has not yet started, and
         * so the waiter will have to continue trying to check the CIL
         * committing list until it is found. In extreme cases of delay, the
         * sequence may fully commit between the attempts the wait makes to wait
         * on the commit sequence.
         */
        list_add(&ctx->committing, &cil->xc_committing);
        spin_unlock(&cil->xc_push_lock);

        xlog_cil_build_lv_chain(ctx, &whiteouts, &num_iovecs, &num_bytes);

        /*
         * Switch the contexts so we can drop the context lock and move out
         * of a shared context. We can't just go straight to the commit record,
         * though - we need to synchronise with previous and future commits so
         * that the commit records are correctly ordered in the log to ensure
         * that we process items during log IO completion in the correct order.
         *
         * For example, if we get an EFI in one checkpoint and the EFD in the
         * next (e.g. due to log forces), we do not want the checkpoint with
         * the EFD to be committed before the checkpoint with the EFI.  Hence
         * we must strictly order the commit records of the checkpoints so
         * that: a) the checkpoint callbacks are attached to the iclogs in the
         * correct order; and b) the checkpoints are replayed in correct order
         * in log recovery.
         *
         * Hence we need to add this context to the committing context list so
         * that higher sequences will wait for us to write out a commit record
         * before they do.
         *
         * xfs_log_force_seq requires us to mirror the new sequence into the cil
         * structure atomically with the addition of this sequence to the
         * committing list. This also ensures that we can do unlocked checks
         * against the current sequence in log forces without risking
         * deferencing a freed context pointer.
         */
        spin_lock(&cil->xc_push_lock);
        xlog_cil_ctx_switch(cil, new_ctx);
        spin_unlock(&cil->xc_push_lock);
        up_write(&cil->xc_ctx_lock);

        /*
         * Sort the log vector chain before we add the transaction headers.
         * This ensures we always have the transaction headers at the start
         * of the chain.
         */
        list_sort(NULL, &ctx->lv_chain, xlog_cil_order_cmp);

        /*
         * Build a checkpoint transaction header and write it to the log to
         * begin the transaction. We need to account for the space used by the
         * transaction header here as it is not accounted for in xlog_write().
         * Add the lvhdr to the head of the lv chain we pass to xlog_write() so
         * it gets written into the iclog first.
         */
        xlog_cil_build_trans_hdr(ctx, &thdr, &lvhdr, num_iovecs);
        num_bytes += lvhdr.lv_bytes;
        list_add(&lvhdr.lv_list, &ctx->lv_chain);

        /*
         * Take the lvhdr back off the lv_chain immediately after calling
         * xlog_cil_write_chain() as it should not be passed to log IO
         * completion.
         */
        error = xlog_cil_write_chain(ctx, num_bytes);
        list_del(&lvhdr.lv_list);
        if (error)
                goto out_abort_free_ticket;

        error = xlog_cil_write_commit_record(ctx);
        if (error)
                goto out_abort_free_ticket;

        /*
         * Grab the ticket from the ctx so we can ungrant it after releasing the
         * commit_iclog. The ctx may be freed by the time we return from
         * releasing the commit_iclog (i.e. checkpoint has been completed and
         * callback run) so we can't reference the ctx after the call to
         * xlog_state_release_iclog().
         */
        ticket = ctx->ticket;

        /*
         * If the checkpoint spans multiple iclogs, wait for all previous iclogs
         * to complete before we submit the commit_iclog. We can't use state
         * checks for this - ACTIVE can be either a past completed iclog or a
         * future iclog being filled, while WANT_SYNC through SYNC_DONE can be a
         * past or future iclog awaiting IO or ordered IO completion to be run.
         * In the latter case, if it's a future iclog and we wait on it, the we
         * will hang because it won't get processed through to ic_force_wait
         * wakeup until this commit_iclog is written to disk.  Hence we use the
         * iclog header lsn and compare it to the commit lsn to determine if we
         * need to wait on iclogs or not.
         */
        spin_lock(&log->l_icloglock);
        if (ctx->start_lsn != ctx->commit_lsn) {
                xfs_lsn_t       plsn;

                plsn = be64_to_cpu(ctx->commit_iclog->ic_prev->ic_header.h_lsn);
                if (plsn && XFS_LSN_CMP(plsn, ctx->commit_lsn) < 0) {
                        /*
                         * Waiting on ic_force_wait orders the completion of
                         * iclogs older than ic_prev. Hence we only need to wait
                         * on the most recent older iclog here.
                         */
                        xlog_wait_on_iclog(ctx->commit_iclog->ic_prev);
                        spin_lock(&log->l_icloglock);
                }

                /*
                 * We need to issue a pre-flush so that the ordering for this
                 * checkpoint is correctly preserved down to stable storage.
                 */
                ctx->commit_iclog->ic_flags |= XLOG_ICL_NEED_FLUSH;
        }

        /*
         * The commit iclog must be written to stable storage to guarantee
         * journal IO vs metadata writeback IO is correctly ordered on stable
         * storage.
         *
         * If the push caller needs the commit to be immediately stable and the
         * commit_iclog is not yet marked as XLOG_STATE_WANT_SYNC to indicate it
         * will be written when released, switch it's state to WANT_SYNC right
         * now.
         */
        ctx->commit_iclog->ic_flags |= XLOG_ICL_NEED_FUA;
        if (push_commit_stable &&
            ctx->commit_iclog->ic_state == XLOG_STATE_ACTIVE)
                xlog_state_switch_iclogs(log, ctx->commit_iclog, 0);
        ticket = ctx->ticket;
        xlog_state_release_iclog(log, ctx->commit_iclog, ticket);

        /* Not safe to reference ctx now! */

        spin_unlock(&log->l_icloglock);
        xlog_cil_cleanup_whiteouts(&whiteouts);
        xfs_log_ticket_ungrant(log, ticket);
        return;

out_skip:
        up_write(&cil->xc_ctx_lock);
        xfs_log_ticket_put(new_ctx->ticket);
        kmem_free(new_ctx);
        return;

out_abort_free_ticket:
        ASSERT(xlog_is_shutdown(log));
        xlog_cil_cleanup_whiteouts(&whiteouts);
        if (!ctx->commit_iclog) {
                xfs_log_ticket_ungrant(log, ctx->ticket);
                xlog_cil_committed(ctx);
                return;
        }
        spin_lock(&log->l_icloglock);
        ticket = ctx->ticket;
        xlog_state_release_iclog(log, ctx->commit_iclog, ticket);
        /* Not safe to reference ctx now! */
        spin_unlock(&log->l_icloglock);
        xfs_log_ticket_ungrant(log, ticket);
}

/*
 * We need to push CIL every so often so we don't cache more than we can fit in
 * the log. The limit really is that a checkpoint can't be more than half the
 * log (the current checkpoint is not allowed to overwrite the previous
 * checkpoint), but commit latency and memory usage limit this to a smaller
 * size.
 */
static void
xlog_cil_push_background(
        struct xlog     *log) __releases(cil->xc_ctx_lock)
{
        struct xfs_cil  *cil = log->l_cilp;
        int             space_used = atomic_read(&cil->xc_ctx->space_used);

        /*
         * The cil won't be empty because we are called while holding the
         * context lock so whatever we added to the CIL will still be there.
         */
        ASSERT(!test_bit(XLOG_CIL_EMPTY, &cil->xc_flags));

        /*
         * We are done if:
         * - we haven't used up all the space available yet; or
         * - we've already queued up a push; and
         * - we're not over the hard limit; and
         * - nothing has been over the hard limit.
         *
         * If so, we don't need to take the push lock as there's nothing to do.
         */
        if (space_used < XLOG_CIL_SPACE_LIMIT(log) ||
            (cil->xc_push_seq == cil->xc_current_sequence &&
             space_used < XLOG_CIL_BLOCKING_SPACE_LIMIT(log) &&
             !waitqueue_active(&cil->xc_push_wait))) {
                up_read(&cil->xc_ctx_lock);
                return;
        }

        spin_lock(&cil->xc_push_lock);
        if (cil->xc_push_seq < cil->xc_current_sequence) {
                cil->xc_push_seq = cil->xc_current_sequence;
                queue_work(cil->xc_push_wq, &cil->xc_ctx->push_work);
        }

        /*
         * Drop the context lock now, we can't hold that if we need to sleep
         * because we are over the blocking threshold. The push_lock is still
         * held, so blocking threshold sleep/wakeup is still correctly
         * serialised here.
         */
        up_read(&cil->xc_ctx_lock);

        /*
         * If we are well over the space limit, throttle the work that is being
         * done until the push work on this context has begun. Enforce the hard
         * throttle on all transaction commits once it has been activated, even
         * if the committing transactions have resulted in the space usage
         * dipping back down under the hard limit.
         *
         * The ctx->xc_push_lock provides the serialisation necessary for safely
         * calling xlog_cil_over_hard_limit() in this context.
         */
        if (xlog_cil_over_hard_limit(log, space_used)) {
                trace_xfs_log_cil_wait(log, cil->xc_ctx->ticket);
                ASSERT(space_used < log->l_logsize);
                xlog_wait(&cil->xc_push_wait, &cil->xc_push_lock);
                return;
        }

        spin_unlock(&cil->xc_push_lock);

}

/*
 * xlog_cil_push_now() is used to trigger an immediate CIL push to the sequence
 * number that is passed. When it returns, the work will be queued for
 * @push_seq, but it won't be completed.
 *
 * If the caller is performing a synchronous force, we will flush the workqueue
 * to get previously queued work moving to minimise the wait time they will
 * undergo waiting for all outstanding pushes to complete. The caller is
 * expected to do the required waiting for push_seq to complete.
 *
 * If the caller is performing an async push, we need to ensure that the
 * checkpoint is fully flushed out of the iclogs when we finish the push. If we
 * don't do this, then the commit record may remain sitting in memory in an
 * ACTIVE iclog. This then requires another full log force to push to disk,
 * which defeats the purpose of having an async, non-blocking CIL force
 * mechanism. Hence in this case we need to pass a flag to the push work to
 * indicate it needs to flush the commit record itself.
 */
static void
xlog_cil_push_now(
        struct xlog     *log,
        xfs_lsn_t       push_seq,
        bool            async)
{
        struct xfs_cil  *cil = log->l_cilp;

        if (!cil)
                return;

        ASSERT(push_seq && push_seq <= cil->xc_current_sequence);

        /* start on any pending background push to minimise wait time on it */
        if (!async)
                flush_workqueue(cil->xc_push_wq);

        spin_lock(&cil->xc_push_lock);

        /*
         * If this is an async flush request, we always need to set the
         * xc_push_commit_stable flag even if something else has already queued
         * a push. The flush caller is asking for the CIL to be on stable
         * storage when the next push completes, so regardless of who has queued
         * the push, the flush requires stable semantics from it.
         */
        cil->xc_push_commit_stable = async;

        /*
         * If the CIL is empty or we've already pushed the sequence then
         * there's no more work that we need to do.
         */
        if (test_bit(XLOG_CIL_EMPTY, &cil->xc_flags) ||
            push_seq <= cil->xc_push_seq) {
                spin_unlock(&cil->xc_push_lock);
                return;
        }

        cil->xc_push_seq = push_seq;
        queue_work(cil->xc_push_wq, &cil->xc_ctx->push_work);
        spin_unlock(&cil->xc_push_lock);
}

bool
xlog_cil_empty(
        struct xlog     *log)
{
        struct xfs_cil  *cil = log->l_cilp;
        bool            empty = false;

        spin_lock(&cil->xc_push_lock);
        if (test_bit(XLOG_CIL_EMPTY, &cil->xc_flags))
                empty = true;
        spin_unlock(&cil->xc_push_lock);
        return empty;
}

/*
 * If there are intent done items in this transaction and the related intent was
 * committed in the current (same) CIL checkpoint, we don't need to write either
 * the intent or intent done item to the journal as the change will be
 * journalled atomically within this checkpoint. As we cannot remove items from
 * the CIL here, mark the related intent with a whiteout so that the CIL push
 * can remove it rather than writing it to the journal. Then remove the intent
 * done item from the current transaction and release it so it doesn't get put
 * into the CIL at all.
 */
static uint32_t
xlog_cil_process_intents(
        struct xfs_cil          *cil,
        struct xfs_trans        *tp)
{
        struct xfs_log_item     *lip, *ilip, *next;
        uint32_t                len = 0;

        list_for_each_entry_safe(lip, next, &tp->t_items, li_trans) {
                if (!(lip->li_ops->flags & XFS_ITEM_INTENT_DONE))
                        continue;

                ilip = lip->li_ops->iop_intent(lip);
                if (!ilip || !xlog_item_in_current_chkpt(cil, ilip))
                        continue;
                set_bit(XFS_LI_WHITEOUT, &ilip->li_flags);
                trace_xfs_cil_whiteout_mark(ilip);
                len += ilip->li_lv->lv_bytes;
                kmem_free(ilip->li_lv);
                ilip->li_lv = NULL;

                xfs_trans_del_item(lip);
                lip->li_ops->iop_release(lip);
        }
        return len;
}

/*
 * Commit a transaction with the given vector to the Committed Item List.
 *
 * To do this, we need to format the item, pin it in memory if required and
 * account for the space used by the transaction. Once we have done that we
 * need to release the unused reservation for the transaction, attach the
 * transaction to the checkpoint context so we carry the busy extents through
 * to checkpoint completion, and then unlock all the items in the transaction.
 *
 * Called with the context lock already held in read mode to lock out
 * background commit, returns without it held once background commits are
 * allowed again.
 */
void
xlog_cil_commit(
        struct xlog             *log,
        struct xfs_trans        *tp,
        xfs_csn_t               *commit_seq,
        bool                    regrant)
{
        struct xfs_cil          *cil = log->l_cilp;
        struct xfs_log_item     *lip, *next;
        uint32_t                released_space = 0;

        /*
         * Do all necessary memory allocation before we lock the CIL.
         * This ensures the allocation does not deadlock with a CIL
         * push in memory reclaim (e.g. from kswapd).
         */
        xlog_cil_alloc_shadow_bufs(log, tp);

        /* lock out background commit */
        down_read(&cil->xc_ctx_lock);

        if (tp->t_flags & XFS_TRANS_HAS_INTENT_DONE)
                released_space = xlog_cil_process_intents(cil, tp);

        xlog_cil_insert_items(log, tp, released_space);

        if (regrant && !xlog_is_shutdown(log))
                xfs_log_ticket_regrant(log, tp->t_ticket);
        else
                xfs_log_ticket_ungrant(log, tp->t_ticket);
        tp->t_ticket = NULL;
        xfs_trans_unreserve_and_mod_sb(tp);

        /*
         * Once all the items of the transaction have been copied to the CIL,
         * the items can be unlocked and possibly freed.
         *
         * This needs to be done before we drop the CIL context lock because we
         * have to update state in the log items and unlock them before they go
         * to disk. If we don't, then the CIL checkpoint can race with us and
         * we can run checkpoint completion before we've updated and unlocked
         * the log items. This affects (at least) processing of stale buffers,
         * inodes and EFIs.
         */
        trace_xfs_trans_commit_items(tp, _RET_IP_);
        list_for_each_entry_safe(lip, next, &tp->t_items, li_trans) {
                xfs_trans_del_item(lip);
                if (lip->li_ops->iop_committing)
                        lip->li_ops->iop_committing(lip, cil->xc_ctx->sequence);
        }
        if (commit_seq)
                *commit_seq = cil->xc_ctx->sequence;

        /* xlog_cil_push_background() releases cil->xc_ctx_lock */
        xlog_cil_push_background(log);
}

/*
 * Flush the CIL to stable storage but don't wait for it to complete. This
 * requires the CIL push to ensure the commit record for the push hits the disk,
 * but otherwise is no different to a push done from a log force.
 */
void
xlog_cil_flush(
        struct xlog     *log)
{
        xfs_csn_t       seq = log->l_cilp->xc_current_sequence;

        trace_xfs_log_force(log->l_mp, seq, _RET_IP_);
        xlog_cil_push_now(log, seq, true);

        /*
         * If the CIL is empty, make sure that any previous checkpoint that may
         * still be in an active iclog is pushed to stable storage.
         */
        if (test_bit(XLOG_CIL_EMPTY, &log->l_cilp->xc_flags))
                xfs_log_force(log->l_mp, 0);
}

/*
 * Conditionally push the CIL based on the sequence passed in.
 *
 * We only need to push if we haven't already pushed the sequence number given.
 * Hence the only time we will trigger a push here is if the push sequence is
 * the same as the current context.
 *
 * We return the current commit lsn to allow the callers to determine if a
 * iclog flush is necessary following this call.
 */
xfs_lsn_t
xlog_cil_force_seq(
        struct xlog     *log,
        xfs_csn_t       sequence)
{
        struct xfs_cil          *cil = log->l_cilp;
        struct xfs_cil_ctx      *ctx;
        xfs_lsn_t               commit_lsn = NULLCOMMITLSN;

        ASSERT(sequence <= cil->xc_current_sequence);

        if (!sequence)
                sequence = cil->xc_current_sequence;
        trace_xfs_log_force(log->l_mp, sequence, _RET_IP_);

        /*
         * check to see if we need to force out the current context.
         * xlog_cil_push() handles racing pushes for the same sequence,
         * so no need to deal with it here.
         */
restart:
        xlog_cil_push_now(log, sequence, false);

        /*
         * See if we can find a previous sequence still committing.
         * We need to wait for all previous sequence commits to complete
         * before allowing the force of push_seq to go ahead. Hence block
         * on commits for those as well.
         */
        spin_lock(&cil->xc_push_lock);
        list_for_each_entry(ctx, &cil->xc_committing, committing) {
                /*
                 * Avoid getting stuck in this loop because we were woken by the
                 * shutdown, but then went back to sleep once already in the
                 * shutdown state.
                 */
                if (xlog_is_shutdown(log))
                        goto out_shutdown;
                if (ctx->sequence > sequence)
                        continue;
                if (!ctx->commit_lsn) {
                        /*
                         * It is still being pushed! Wait for the push to
                         * complete, then start again from the beginning.
                         */
                        XFS_STATS_INC(log->l_mp, xs_log_force_sleep);
                        xlog_wait(&cil->xc_commit_wait, &cil->xc_push_lock);
                        goto restart;
                }
                if (ctx->sequence != sequence)
                        continue;
                /* found it! */
                commit_lsn = ctx->commit_lsn;
        }

        /*
         * The call to xlog_cil_push_now() executes the push in the background.
         * Hence by the time we have got here it our sequence may not have been
         * pushed yet. This is true if the current sequence still matches the
         * push sequence after the above wait loop and the CIL still contains
         * dirty objects. This is guaranteed by the push code first adding the
         * context to the committing list before emptying the CIL.
         *
         * Hence if we don't find the context in the committing list and the
         * current sequence number is unchanged then the CIL contents are
         * significant.  If the CIL is empty, if means there was nothing to push
         * and that means there is nothing to wait for. If the CIL is not empty,
         * it means we haven't yet started the push, because if it had started
         * we would have found the context on the committing list.
         */
        if (sequence == cil->xc_current_sequence &&
            !test_bit(XLOG_CIL_EMPTY, &cil->xc_flags)) {
                spin_unlock(&cil->xc_push_lock);
                goto restart;
        }

        spin_unlock(&cil->xc_push_lock);
        return commit_lsn;

        /*
         * We detected a shutdown in progress. We need to trigger the log force
         * to pass through it's iclog state machine error handling, even though
         * we are already in a shutdown state. Hence we can't return
         * NULLCOMMITLSN here as that has special meaning to log forces (i.e.
         * LSN is already stable), so we return a zero LSN instead.
         */
out_shutdown:
        spin_unlock(&cil->xc_push_lock);
        return 0;
}

/*
 * Perform initial CIL structure initialisation.
 */
int
xlog_cil_init(
        struct xlog             *log)
{
        struct xfs_cil          *cil;
        struct xfs_cil_ctx      *ctx;
        struct xlog_cil_pcp     *cilpcp;
        int                     cpu;

        cil = kmem_zalloc(sizeof(*cil), KM_MAYFAIL);
        if (!cil)
                return -ENOMEM;
        /*
         * Limit the CIL pipeline depth to 4 concurrent works to bound the
         * concurrency the log spinlocks will be exposed to.
         */
        cil->xc_push_wq = alloc_workqueue("xfs-cil/%s",
                        XFS_WQFLAGS(WQ_FREEZABLE | WQ_MEM_RECLAIM | WQ_UNBOUND),
                        4, log->l_mp->m_super->s_id);
        if (!cil->xc_push_wq)
                goto out_destroy_cil;

        cil->xc_log = log;
        cil->xc_pcp = alloc_percpu(struct xlog_cil_pcp);
        if (!cil->xc_pcp)
                goto out_destroy_wq;

        for_each_possible_cpu(cpu) {
                cilpcp = per_cpu_ptr(cil->xc_pcp, cpu);
                INIT_LIST_HEAD(&cilpcp->busy_extents);
                INIT_LIST_HEAD(&cilpcp->log_items);
        }

        INIT_LIST_HEAD(&cil->xc_committing);
        spin_lock_init(&cil->xc_push_lock);
        init_waitqueue_head(&cil->xc_push_wait);
        init_rwsem(&cil->xc_ctx_lock);
        init_waitqueue_head(&cil->xc_start_wait);
        init_waitqueue_head(&cil->xc_commit_wait);
        log->l_cilp = cil;

        ctx = xlog_cil_ctx_alloc();
        xlog_cil_ctx_switch(cil, ctx);
        return 0;

out_destroy_wq:
        destroy_workqueue(cil->xc_push_wq);
out_destroy_cil:
        kmem_free(cil);
        return -ENOMEM;
}

void
xlog_cil_destroy(
        struct xlog     *log)
{
        struct xfs_cil  *cil = log->l_cilp;

        if (cil->xc_ctx) {
                if (cil->xc_ctx->ticket)
                        xfs_log_ticket_put(cil->xc_ctx->ticket);
                kmem_free(cil->xc_ctx);
        }

        ASSERT(test_bit(XLOG_CIL_EMPTY, &cil->xc_flags));
        free_percpu(cil->xc_pcp);
        destroy_workqueue(cil->xc_push_wq);
        kmem_free(cil);
}