1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2013, Michael (Ellerman|Neuling), IBM Corporation.
6 #define pr_fmt(fmt) "powernv: " fmt
8 #include <linux/kernel.h>
10 #include <linux/cpumask.h>
11 #include <linux/device.h>
12 #include <linux/gfp.h>
13 #include <linux/smp.h>
14 #include <linux/stop_machine.h>
16 #include <asm/cputhreads.h>
17 #include <asm/cpuidle.h>
18 #include <asm/kvm_ppc.h>
19 #include <asm/machdep.h>
23 #include <trace/events/ipi.h>
30 * Split/unsplit procedure:
32 * A core can be in one of three states, unsplit, 2-way split, and 4-way split.
34 * The mapping to subcores_per_core is simple:
36 * State | subcores_per_core
37 * ------------|------------------
42 * The core is split along thread boundaries, the mapping between subcores and
43 * threads is as follows:
46 * ----------------------------
48 * ----------------------------
49 * Thread | 0 1 2 3 4 5 6 7 |
50 * ----------------------------
53 * -------------------------------------
55 * -------------------------------------
56 * Thread | 0 1 2 3 | 4 5 6 7 |
57 * -------------------------------------
60 * -----------------------------------------
61 * Subcore | 0 | 1 | 2 | 3 |
62 * -----------------------------------------
63 * Thread | 0 1 | 2 3 | 4 5 | 6 7 |
64 * -----------------------------------------
70 * It is not possible to transition between either of the split states, the
71 * core must first be unsplit. The legal transitions are:
73 * ----------- ---------------
74 * | | <----> | 2-way split |
78 * | | <----> | 4-way split |
79 * ----------- ---------------
84 * Unsplitting is the simpler procedure. It requires thread 0 to request the
85 * unsplit while all other threads NAP.
87 * Thread 0 clears HID0_POWER8_DYNLPARDIS (Dynamic LPAR Disable). This tells
88 * the hardware that if all threads except 0 are napping, the hardware should
91 * Non-zero threads are sent to a NAP loop, they don't exit the loop until they
92 * see the core unsplit.
94 * Core 0 spins waiting for the hardware to see all the other threads napping
95 * and perform the unsplit.
97 * Once thread 0 sees the unsplit, it IPIs the secondary threads to wake them
98 * out of NAP. They will then see the core unsplit and exit the NAP loop.
103 * The basic splitting procedure is fairly straight forward. However it is
104 * complicated by the fact that after the split occurs, the newly created
105 * subcores are not in a fully initialised state.
107 * Most notably the subcores do not have the correct value for SDR1, which
108 * means they must not be running in virtual mode when the split occurs. The
109 * subcores have separate timebases SPRs but these are pre-synchronised by
112 * To begin with secondary threads are sent to an assembly routine. There they
113 * switch to real mode, so they are immune to the uninitialised SDR1 value.
114 * Once in real mode they indicate that they are in real mode, and spin waiting
115 * to see the core split.
117 * Thread 0 waits to see that all secondaries are in real mode, and then begins
118 * the splitting procedure. It firstly sets HID0_POWER8_DYNLPARDIS, which
119 * prevents the hardware from unsplitting. Then it sets the appropriate HID bit
120 * to request the split, and spins waiting to see that the split has happened.
122 * Concurrently the secondaries will notice the split. When they do they set up
123 * their SPRs, notably SDR1, and then they can return to virtual mode and exit
127 /* Initialised at boot by subcore_init() */
128 static int subcores_per_core;
131 * Used to communicate to offline cpus that we want them to pop out of the
132 * offline loop and do a split or unsplit.
134 * 0 - no split happening
135 * 1 - unsplit in progress
136 * 2 - split to 2 in progress
137 * 4 - split to 4 in progress
139 static int new_split_mode;
141 static cpumask_var_t cpu_offline_mask;
148 static DEFINE_PER_CPU(struct split_state, split_state);
150 static void wait_for_sync_step(int step)
152 int i, cpu = smp_processor_id();
154 for (i = cpu + 1; i < cpu + threads_per_core; i++)
155 while(per_cpu(split_state, i).step < step)
158 /* Order the wait loop vs any subsequent loads/stores. */
162 static void update_hid_in_slw(u64 hid0)
164 u64 idle_states = pnv_get_supported_cpuidle_states();
166 if (idle_states & OPAL_PM_WINKLE_ENABLED) {
167 /* OPAL call to patch slw with the new HID0 value */
168 u64 cpu_pir = hard_smp_processor_id();
170 opal_slw_set_reg(cpu_pir, SPRN_HID0, hid0);
174 static inline void update_power8_hid0(unsigned long hid0)
177 * The HID0 update on Power8 should at the very least be
178 * preceded by a SYNC instruction followed by an ISYNC
181 asm volatile("sync; mtspr %0,%1; isync":: "i"(SPRN_HID0), "r"(hid0));
184 static void unsplit_core(void)
189 mask = HID0_POWER8_2LPARMODE | HID0_POWER8_4LPARMODE;
191 cpu = smp_processor_id();
192 if (cpu_thread_in_core(cpu) != 0) {
193 while (mfspr(SPRN_HID0) & mask)
194 power7_idle_type(PNV_THREAD_NAP);
196 per_cpu(split_state, cpu).step = SYNC_STEP_UNSPLIT;
200 hid0 = mfspr(SPRN_HID0);
201 hid0 &= ~HID0_POWER8_DYNLPARDIS;
202 update_power8_hid0(hid0);
203 update_hid_in_slw(hid0);
205 while (mfspr(SPRN_HID0) & mask)
208 /* Wake secondaries out of NAP */
209 for (i = cpu + 1; i < cpu + threads_per_core; i++)
210 smp_send_reschedule(i);
212 wait_for_sync_step(SYNC_STEP_UNSPLIT);
215 static void split_core(int new_mode)
217 struct { u64 value; u64 mask; } split_parms[2] = {
218 { HID0_POWER8_1TO2LPAR, HID0_POWER8_2LPARMODE },
219 { HID0_POWER8_1TO4LPAR, HID0_POWER8_4LPARMODE }
224 /* Convert new_mode (2 or 4) into an index into our parms array */
225 i = (new_mode >> 1) - 1;
226 BUG_ON(i < 0 || i > 1);
228 cpu = smp_processor_id();
229 if (cpu_thread_in_core(cpu) != 0) {
230 split_core_secondary_loop(&per_cpu(split_state, cpu).step);
234 wait_for_sync_step(SYNC_STEP_REAL_MODE);
237 hid0 = mfspr(SPRN_HID0);
238 hid0 |= HID0_POWER8_DYNLPARDIS | split_parms[i].value;
239 update_power8_hid0(hid0);
240 update_hid_in_slw(hid0);
242 /* Wait for it to happen */
243 while (!(mfspr(SPRN_HID0) & split_parms[i].mask))
247 static void cpu_do_split(int new_mode)
250 * At boot subcores_per_core will be 0, so we will always unsplit at
251 * boot. In the usual case where the core is already unsplit it's a
252 * nop, and this just ensures the kernel's notion of the mode is
253 * consistent with the hardware.
255 if (subcores_per_core != 1)
259 split_core(new_mode);
262 per_cpu(split_state, smp_processor_id()).step = SYNC_STEP_FINISHED;
265 bool cpu_core_split_required(void)
272 cpu_do_split(new_split_mode);
277 void update_subcore_sibling_mask(void)
281 * sibling mask for the first cpu. Left shift this by required bits
282 * to get sibling mask for the rest of the cpus.
284 int sibling_mask_first_cpu = (1 << threads_per_subcore) - 1;
286 for_each_possible_cpu(cpu) {
287 int tid = cpu_thread_in_core(cpu);
288 int offset = (tid / threads_per_subcore) * threads_per_subcore;
289 int mask = sibling_mask_first_cpu << offset;
291 paca_ptrs[cpu]->subcore_sibling_mask = mask;
296 static int cpu_update_split_mode(void *data)
298 int cpu, new_mode = *(int *)data;
300 if (this_cpu_ptr(&split_state)->master) {
301 new_split_mode = new_mode;
304 cpumask_andnot(cpu_offline_mask, cpu_present_mask,
307 /* This should work even though the cpu is offline */
308 for_each_cpu(cpu, cpu_offline_mask)
309 smp_send_reschedule(cpu);
312 cpu_do_split(new_mode);
314 if (this_cpu_ptr(&split_state)->master) {
315 /* Wait for all cpus to finish before we touch subcores_per_core */
316 for_each_present_cpu(cpu) {
317 if (cpu >= setup_max_cpus)
320 while(per_cpu(split_state, cpu).step < SYNC_STEP_FINISHED)
326 /* Make the new mode public */
327 subcores_per_core = new_mode;
328 threads_per_subcore = threads_per_core / subcores_per_core;
329 update_subcore_sibling_mask();
331 /* Make sure the new mode is written before we exit */
338 static int set_subcores_per_core(int new_mode)
340 struct split_state *state;
343 if (kvm_hv_mode_active()) {
344 pr_err("Unable to change split core mode while KVM active.\n");
349 * We are only called at boot, or from the sysfs write. If that ever
350 * changes we'll need a lock here.
352 BUG_ON(new_mode < 1 || new_mode > 4 || new_mode == 3);
354 for_each_present_cpu(cpu) {
355 state = &per_cpu(split_state, cpu);
356 state->step = SYNC_STEP_INITIAL;
362 /* This cpu will update the globals before exiting stop machine */
363 this_cpu_ptr(&split_state)->master = 1;
365 /* Ensure state is consistent before we call the other cpus */
368 stop_machine_cpuslocked(cpu_update_split_mode, &new_mode,
376 static ssize_t __used store_subcores_per_core(struct device *dev,
377 struct device_attribute *attr, const char *buf,
383 /* We are serialised by the attribute lock */
385 rc = sscanf(buf, "%lx", &val);
393 if (subcores_per_core == val)
401 rc = set_subcores_per_core(val);
409 static ssize_t show_subcores_per_core(struct device *dev,
410 struct device_attribute *attr, char *buf)
412 return sprintf(buf, "%x\n", subcores_per_core);
415 static DEVICE_ATTR(subcores_per_core, 0644,
416 show_subcores_per_core, store_subcores_per_core);
418 static int subcore_init(void)
420 struct device *dev_root;
424 pvr_ver = PVR_VER(mfspr(SPRN_PVR));
426 if (pvr_ver != PVR_POWER8 &&
427 pvr_ver != PVR_POWER8E &&
428 pvr_ver != PVR_POWER8NVL)
432 * We need all threads in a core to be present to split/unsplit so
433 * continue only if max_cpus are aligned to threads_per_core.
435 if (setup_max_cpus % threads_per_core)
438 BUG_ON(!alloc_cpumask_var(&cpu_offline_mask, GFP_KERNEL));
440 set_subcores_per_core(1);
442 dev_root = bus_get_dev_root(&cpu_subsys);
444 rc = device_create_file(dev_root, &dev_attr_subcores_per_core);
445 put_device(dev_root);
449 machine_device_initcall(powernv, subcore_init);