arm64: dts: qcom: sm8550: add TRNG node
[linux-modified.git] / sound / soc / intel / boards / bdw-rt5650.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * ASoC machine driver for Intel Broadwell platforms with RT5650 codec
4  *
5  * Copyright 2019, The Chromium OS Authors.  All rights reserved.
6  */
7
8 #include <linux/delay.h>
9 #include <linux/gpio/consumer.h>
10 #include <linux/module.h>
11 #include <linux/platform_device.h>
12 #include <sound/core.h>
13 #include <sound/jack.h>
14 #include <sound/pcm.h>
15 #include <sound/pcm_params.h>
16 #include <sound/soc.h>
17 #include <sound/soc-acpi.h>
18
19 #include "../../codecs/rt5645.h"
20
21 struct bdw_rt5650_priv {
22         struct gpio_desc *gpio_hp_en;
23         struct snd_soc_component *component;
24 };
25
26 static const struct snd_soc_dapm_widget bdw_rt5650_widgets[] = {
27         SND_SOC_DAPM_HP("Headphone", NULL),
28         SND_SOC_DAPM_SPK("Speaker", NULL),
29         SND_SOC_DAPM_MIC("Headset Mic", NULL),
30         SND_SOC_DAPM_MIC("DMIC Pair1", NULL),
31         SND_SOC_DAPM_MIC("DMIC Pair2", NULL),
32 };
33
34 static const struct snd_soc_dapm_route bdw_rt5650_map[] = {
35         /* Speakers */
36         {"Speaker", NULL, "SPOL"},
37         {"Speaker", NULL, "SPOR"},
38
39         /* Headset jack connectors */
40         {"Headphone", NULL, "HPOL"},
41         {"Headphone", NULL, "HPOR"},
42         {"IN1P", NULL, "Headset Mic"},
43         {"IN1N", NULL, "Headset Mic"},
44
45         /* Digital MICs
46          * DMIC Pair1 are the two DMICs connected on the DMICN1 connector.
47          * DMIC Pair2 are the two DMICs connected on the DMICN2 connector.
48          * Facing the camera, DMIC Pair1 are on the left side, DMIC Pair2
49          * are on the right side.
50          */
51         {"DMIC L1", NULL, "DMIC Pair1"},
52         {"DMIC R1", NULL, "DMIC Pair1"},
53         {"DMIC L2", NULL, "DMIC Pair2"},
54         {"DMIC R2", NULL, "DMIC Pair2"},
55
56         /* CODEC BE connections */
57         {"SSP0 CODEC IN", NULL, "AIF1 Capture"},
58         {"AIF1 Playback", NULL, "SSP0 CODEC OUT"},
59 };
60
61 static const struct snd_kcontrol_new bdw_rt5650_controls[] = {
62         SOC_DAPM_PIN_SWITCH("Speaker"),
63         SOC_DAPM_PIN_SWITCH("Headphone"),
64         SOC_DAPM_PIN_SWITCH("Headset Mic"),
65         SOC_DAPM_PIN_SWITCH("DMIC Pair1"),
66         SOC_DAPM_PIN_SWITCH("DMIC Pair2"),
67 };
68
69
70 static struct snd_soc_jack headphone_jack;
71 static struct snd_soc_jack mic_jack;
72
73 static struct snd_soc_jack_pin headphone_jack_pin = {
74         .pin    = "Headphone",
75         .mask   = SND_JACK_HEADPHONE,
76 };
77
78 static struct snd_soc_jack_pin mic_jack_pin = {
79         .pin    = "Headset Mic",
80         .mask   = SND_JACK_MICROPHONE,
81 };
82
83 static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
84                         struct snd_pcm_hw_params *params)
85 {
86         struct snd_interval *rate = hw_param_interval(params,
87                                                       SNDRV_PCM_HW_PARAM_RATE);
88         struct snd_interval *chan = hw_param_interval(params,
89                                                       SNDRV_PCM_HW_PARAM_CHANNELS);
90
91         /* The ADSP will convert the FE rate to 48k, max 4-channels */
92         rate->min = rate->max = 48000;
93         chan->min = 2;
94         chan->max = 4;
95
96         /* set SSP0 to 24 bit */
97         snd_mask_set_format(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT),
98                             SNDRV_PCM_FORMAT_S24_LE);
99
100         return 0;
101 }
102
103 static int bdw_rt5650_hw_params(struct snd_pcm_substream *substream,
104         struct snd_pcm_hw_params *params)
105 {
106         struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
107         struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
108         int ret;
109
110         /* Workaround: set codec PLL to 19.2MHz that PLL source is
111          * from MCLK(24MHz) to conform 2.4MHz DMIC clock.
112          */
113         ret = snd_soc_dai_set_pll(codec_dai, 0, RT5645_PLL1_S_MCLK,
114                 24000000, 19200000);
115         if (ret < 0) {
116                 dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
117                 return ret;
118         }
119
120         /* The actual MCLK freq is 24MHz. The codec is told that MCLK is
121          * 24.576MHz to satisfy the requirement of rl6231_get_clk_info.
122          * ASRC is enabled on AD and DA filters to ensure good audio quality.
123          */
124         ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_PLL1, 24576000,
125                 SND_SOC_CLOCK_IN);
126         if (ret < 0) {
127                 dev_err(rtd->dev, "can't set codec sysclk configuration\n");
128                 return ret;
129         }
130
131         return ret;
132 }
133
134 static struct snd_soc_ops bdw_rt5650_ops = {
135         .hw_params = bdw_rt5650_hw_params,
136 };
137
138 static const unsigned int channels[] = {
139         2, 4,
140 };
141
142 static const struct snd_pcm_hw_constraint_list constraints_channels = {
143         .count = ARRAY_SIZE(channels),
144         .list = channels,
145         .mask = 0,
146 };
147
148 static int bdw_rt5650_fe_startup(struct snd_pcm_substream *substream)
149 {
150         struct snd_pcm_runtime *runtime = substream->runtime;
151
152         /* Board supports stereo and quad configurations for capture */
153         if (substream->stream != SNDRV_PCM_STREAM_CAPTURE)
154                 return 0;
155
156         runtime->hw.channels_max = 4;
157         return snd_pcm_hw_constraint_list(runtime, 0,
158                                           SNDRV_PCM_HW_PARAM_CHANNELS,
159                                           &constraints_channels);
160 }
161
162 static const struct snd_soc_ops bdw_rt5650_fe_ops = {
163         .startup = bdw_rt5650_fe_startup,
164 };
165
166 static int bdw_rt5650_init(struct snd_soc_pcm_runtime *rtd)
167 {
168         struct bdw_rt5650_priv *bdw_rt5650 =
169                 snd_soc_card_get_drvdata(rtd->card);
170         struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
171         struct snd_soc_component *component = codec_dai->component;
172         int ret;
173
174         /* Enable codec ASRC function for Stereo DAC/Stereo1 ADC/DMIC/I2S1.
175          * The ASRC clock source is clk_i2s1_asrc.
176          */
177         rt5645_sel_asrc_clk_src(component,
178                                 RT5645_DA_STEREO_FILTER |
179                                 RT5645_DA_MONO_L_FILTER |
180                                 RT5645_DA_MONO_R_FILTER |
181                                 RT5645_AD_STEREO_FILTER |
182                                 RT5645_AD_MONO_L_FILTER |
183                                 RT5645_AD_MONO_R_FILTER,
184                                 RT5645_CLK_SEL_I2S1_ASRC);
185
186         /* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
187         ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0xF, 4, 24);
188
189         if (ret < 0) {
190                 dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret);
191                 return ret;
192         }
193
194         /* Create and initialize headphone jack */
195         if (snd_soc_card_jack_new_pins(rtd->card, "Headphone Jack",
196                         SND_JACK_HEADPHONE, &headphone_jack,
197                         &headphone_jack_pin, 1)) {
198                 dev_err(component->dev, "Can't create headphone jack\n");
199         }
200
201         /* Create and initialize mic jack */
202         if (snd_soc_card_jack_new_pins(rtd->card, "Mic Jack",
203                         SND_JACK_MICROPHONE, &mic_jack, &mic_jack_pin, 1)) {
204                 dev_err(component->dev, "Can't create mic jack\n");
205         }
206
207         rt5645_set_jack_detect(component, &headphone_jack, &mic_jack, NULL);
208
209         bdw_rt5650->component = component;
210
211         return 0;
212 }
213
214 /* broadwell digital audio interface glue - connects codec <--> CPU */
215 SND_SOC_DAILINK_DEF(dummy,
216         DAILINK_COMP_ARRAY(COMP_DUMMY()));
217
218 SND_SOC_DAILINK_DEF(fe,
219         DAILINK_COMP_ARRAY(COMP_CPU("System Pin")));
220
221 SND_SOC_DAILINK_DEF(platform,
222         DAILINK_COMP_ARRAY(COMP_PLATFORM("haswell-pcm-audio")));
223
224 SND_SOC_DAILINK_DEF(be,
225         DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5650:00", "rt5645-aif1")));
226
227 SND_SOC_DAILINK_DEF(ssp0_port,
228             DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
229
230 static struct snd_soc_dai_link bdw_rt5650_dais[] = {
231         /* Front End DAI links */
232         {
233                 .name = "System PCM",
234                 .stream_name = "System Playback",
235                 .nonatomic = 1,
236                 .dynamic = 1,
237                 .ops = &bdw_rt5650_fe_ops,
238                 .trigger = {
239                         SND_SOC_DPCM_TRIGGER_POST,
240                         SND_SOC_DPCM_TRIGGER_POST
241                 },
242                 .dpcm_playback = 1,
243                 .dpcm_capture = 1,
244                 SND_SOC_DAILINK_REG(fe, dummy, platform),
245         },
246
247         /* Back End DAI links */
248         {
249                 /* SSP0 - Codec */
250                 .name = "Codec",
251                 .id = 0,
252                 .nonatomic = 1,
253                 .no_pcm = 1,
254                 .dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF |
255                         SND_SOC_DAIFMT_CBC_CFC,
256                 .ignore_pmdown_time = 1,
257                 .be_hw_params_fixup = broadwell_ssp0_fixup,
258                 .ops = &bdw_rt5650_ops,
259                 .dpcm_playback = 1,
260                 .dpcm_capture = 1,
261                 .init = bdw_rt5650_init,
262                 SND_SOC_DAILINK_REG(ssp0_port, be, platform),
263         },
264 };
265
266 /* use space before codec name to simplify card ID, and simplify driver name */
267 #define SOF_CARD_NAME "bdw rt5650" /* card name will be 'sof-bdw rt5650' */
268 #define SOF_DRIVER_NAME "SOF"
269
270 #define CARD_NAME "bdw-rt5650"
271 #define DRIVER_NAME NULL /* card name will be used for driver name */
272
273 /* ASoC machine driver for Broadwell DSP + RT5650 */
274 static struct snd_soc_card bdw_rt5650_card = {
275         .name = CARD_NAME,
276         .driver_name = DRIVER_NAME,
277         .owner = THIS_MODULE,
278         .dai_link = bdw_rt5650_dais,
279         .num_links = ARRAY_SIZE(bdw_rt5650_dais),
280         .dapm_widgets = bdw_rt5650_widgets,
281         .num_dapm_widgets = ARRAY_SIZE(bdw_rt5650_widgets),
282         .dapm_routes = bdw_rt5650_map,
283         .num_dapm_routes = ARRAY_SIZE(bdw_rt5650_map),
284         .controls = bdw_rt5650_controls,
285         .num_controls = ARRAY_SIZE(bdw_rt5650_controls),
286         .fully_routed = true,
287 };
288
289 static int bdw_rt5650_probe(struct platform_device *pdev)
290 {
291         struct bdw_rt5650_priv *bdw_rt5650;
292         struct snd_soc_acpi_mach *mach;
293         int ret;
294
295         bdw_rt5650_card.dev = &pdev->dev;
296
297         /* Allocate driver private struct */
298         bdw_rt5650 = devm_kzalloc(&pdev->dev, sizeof(struct bdw_rt5650_priv),
299                 GFP_KERNEL);
300         if (!bdw_rt5650)
301                 return -ENOMEM;
302
303         /* override platform name, if required */
304         mach = pdev->dev.platform_data;
305         ret = snd_soc_fixup_dai_links_platform_name(&bdw_rt5650_card,
306                                                     mach->mach_params.platform);
307
308         if (ret)
309                 return ret;
310
311         /* set card and driver name */
312         if (snd_soc_acpi_sof_parent(&pdev->dev)) {
313                 bdw_rt5650_card.name = SOF_CARD_NAME;
314                 bdw_rt5650_card.driver_name = SOF_DRIVER_NAME;
315         } else {
316                 bdw_rt5650_card.name = CARD_NAME;
317                 bdw_rt5650_card.driver_name = DRIVER_NAME;
318         }
319
320         snd_soc_card_set_drvdata(&bdw_rt5650_card, bdw_rt5650);
321
322         return devm_snd_soc_register_card(&pdev->dev, &bdw_rt5650_card);
323 }
324
325 static struct platform_driver bdw_rt5650_audio = {
326         .probe = bdw_rt5650_probe,
327         .driver = {
328                 .name = "bdw-rt5650",
329                 .pm = &snd_soc_pm_ops,
330         },
331 };
332
333 module_platform_driver(bdw_rt5650_audio)
334
335 /* Module information */
336 MODULE_AUTHOR("Ben Zhang <benzh@chromium.org>");
337 MODULE_DESCRIPTION("Intel Broadwell RT5650 machine driver");
338 MODULE_LICENSE("GPL v2");
339 MODULE_ALIAS("platform:bdw-rt5650");