sound/soc/codecs/wm8993.c

   1 /*
   2  * wm8993.c -- WM8993 ALSA SoC audio driver
   3  *
   4  * Copyright 2009-12 Wolfson Microelectronics plc
   5  *
   6  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #include <linux/module.h>
  14 #include <linux/moduleparam.h>
  15 #include <linux/init.h>
  16 #include <linux/delay.h>
  17 #include <linux/pm.h>
  18 #include <linux/i2c.h>
  19 #include <linux/regmap.h>
  20 #include <linux/regulator/consumer.h>
  21 #include <linux/spi/spi.h>
  22 #include <linux/slab.h>
  23 #include <sound/core.h>
  24 #include <sound/pcm.h>
  25 #include <sound/pcm_params.h>
  26 #include <sound/tlv.h>
  27 #include <sound/soc.h>
  28 #include <sound/initval.h>
  29 #include <sound/wm8993.h>
  30
  31 #include "wm8993.h"
  32 #include "wm_hubs.h"
  33
  34 #define WM8993_NUM_SUPPLIES 6
  35 static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = {
  36         "DCVDD",
  37         "DBVDD",
  38         "AVDD1",
  39         "AVDD2",
  40         "CPVDD",
  41         "SPKVDD",
  42 };
  43
  44 static const struct reg_default wm8993_reg_defaults[] = {
  45         { 1,   0x0000 },     /* R1   - Power Management (1) */
  46         { 2,   0x6000 },     /* R2   - Power Management (2) */
  47         { 3,   0x0000 },     /* R3   - Power Management (3) */
  48         { 4,   0x4050 },     /* R4   - Audio Interface (1) */
  49         { 5,   0x4000 },     /* R5   - Audio Interface (2) */
  50         { 6,   0x01C8 },     /* R6   - Clocking 1 */
  51         { 7,   0x0000 },     /* R7   - Clocking 2 */
  52         { 8,   0x0000 },     /* R8   - Audio Interface (3) */
  53         { 9,   0x0040 },     /* R9   - Audio Interface (4) */
  54         { 10,  0x0004 },     /* R10  - DAC CTRL */
  55         { 11,  0x00C0 },     /* R11  - Left DAC Digital Volume */
  56         { 12,  0x00C0 },     /* R12  - Right DAC Digital Volume */
  57         { 13,  0x0000 },     /* R13  - Digital Side Tone */
  58         { 14,  0x0300 },     /* R14  - ADC CTRL */
  59         { 15,  0x00C0 },     /* R15  - Left ADC Digital Volume */
  60         { 16,  0x00C0 },     /* R16  - Right ADC Digital Volume */
  61         { 18,  0x0000 },     /* R18  - GPIO CTRL 1 */
  62         { 19,  0x0010 },     /* R19  - GPIO1 */
  63         { 20,  0x0000 },     /* R20  - IRQ_DEBOUNCE */
  64         { 21,  0x0000 },     /* R21  - Inputs Clamp */
  65         { 22,  0x8000 },     /* R22  - GPIOCTRL 2 */
  66         { 23,  0x0800 },     /* R23  - GPIO_POL */
  67         { 24,  0x008B },     /* R24  - Left Line Input 1&2 Volume */
  68         { 25,  0x008B },     /* R25  - Left Line Input 3&4 Volume */
  69         { 26,  0x008B },     /* R26  - Right Line Input 1&2 Volume */
  70         { 27,  0x008B },     /* R27  - Right Line Input 3&4 Volume */
  71         { 28,  0x006D },     /* R28  - Left Output Volume */
  72         { 29,  0x006D },     /* R29  - Right Output Volume */
  73         { 30,  0x0066 },     /* R30  - Line Outputs Volume */
  74         { 31,  0x0020 },     /* R31  - HPOUT2 Volume */
  75         { 32,  0x0079 },     /* R32  - Left OPGA Volume */
  76         { 33,  0x0079 },     /* R33  - Right OPGA Volume */
  77         { 34,  0x0003 },     /* R34  - SPKMIXL Attenuation */
  78         { 35,  0x0003 },     /* R35  - SPKMIXR Attenuation */
  79         { 36,  0x0011 },     /* R36  - SPKOUT Mixers */
  80         { 37,  0x0100 },     /* R37  - SPKOUT Boost */
  81         { 38,  0x0079 },     /* R38  - Speaker Volume Left */
  82         { 39,  0x0079 },     /* R39  - Speaker Volume Right */
  83         { 40,  0x0000 },     /* R40  - Input Mixer2 */
  84         { 41,  0x0000 },     /* R41  - Input Mixer3 */
  85         { 42,  0x0000 },     /* R42  - Input Mixer4 */
  86         { 43,  0x0000 },     /* R43  - Input Mixer5 */
  87         { 44,  0x0000 },     /* R44  - Input Mixer6 */
  88         { 45,  0x0000 },     /* R45  - Output Mixer1 */
  89         { 46,  0x0000 },     /* R46  - Output Mixer2 */
  90         { 47,  0x0000 },     /* R47  - Output Mixer3 */
  91         { 48,  0x0000 },     /* R48  - Output Mixer4 */
  92         { 49,  0x0000 },     /* R49  - Output Mixer5 */
  93         { 50,  0x0000 },     /* R50  - Output Mixer6 */
  94         { 51,  0x0000 },     /* R51  - HPOUT2 Mixer */
  95         { 52,  0x0000 },     /* R52  - Line Mixer1 */
  96         { 53,  0x0000 },     /* R53  - Line Mixer2 */
  97         { 54,  0x0000 },     /* R54  - Speaker Mixer */
  98         { 55,  0x0000 },     /* R55  - Additional Control */
  99         { 56,  0x0000 },     /* R56  - AntiPOP1 */
 100         { 57,  0x0000 },     /* R57  - AntiPOP2 */
 101         { 58,  0x0000 },     /* R58  - MICBIAS */
 102         { 60,  0x0000 },     /* R60  - FLL Control 1 */
 103         { 61,  0x0000 },     /* R61  - FLL Control 2 */
 104         { 62,  0x0000 },     /* R62  - FLL Control 3 */
 105         { 63,  0x2EE0 },     /* R63  - FLL Control 4 */
 106         { 64,  0x0002 },     /* R64  - FLL Control 5 */
 107         { 65,  0x2287 },     /* R65  - Clocking 3 */
 108         { 66,  0x025F },     /* R66  - Clocking 4 */
 109         { 67,  0x0000 },     /* R67  - MW Slave Control */
 110         { 69,  0x0002 },     /* R69  - Bus Control 1 */
 111         { 70,  0x0000 },     /* R70  - Write Sequencer 0 */
 112         { 71,  0x0000 },     /* R71  - Write Sequencer 1 */
 113         { 72,  0x0000 },     /* R72  - Write Sequencer 2 */
 114         { 73,  0x0000 },     /* R73  - Write Sequencer 3 */
 115         { 74,  0x0000 },     /* R74  - Write Sequencer 4 */
 116         { 75,  0x0000 },     /* R75  - Write Sequencer 5 */
 117         { 76,  0x1F25 },     /* R76  - Charge Pump 1 */
 118         { 81,  0x0000 },     /* R81  - Class W 0 */
 119         { 85,  0x054A },     /* R85  - DC Servo 1 */
 120         { 87,  0x0000 },     /* R87  - DC Servo 3 */
 121         { 96,  0x0100 },     /* R96  - Analogue HP 0 */
 122         { 98,  0x0000 },     /* R98  - EQ1 */
 123         { 99,  0x000C },     /* R99  - EQ2 */
 124         { 100, 0x000C },     /* R100 - EQ3 */
 125         { 101, 0x000C },     /* R101 - EQ4 */
 126         { 102, 0x000C },     /* R102 - EQ5 */
 127         { 103, 0x000C },     /* R103 - EQ6 */
 128         { 104, 0x0FCA },     /* R104 - EQ7 */
 129         { 105, 0x0400 },     /* R105 - EQ8 */
 130         { 106, 0x00D8 },     /* R106 - EQ9 */
 131         { 107, 0x1EB5 },     /* R107 - EQ10 */
 132         { 108, 0xF145 },     /* R108 - EQ11 */
 133         { 109, 0x0B75 },     /* R109 - EQ12 */
 134         { 110, 0x01C5 },     /* R110 - EQ13 */
 135         { 111, 0x1C58 },     /* R111 - EQ14 */
 136         { 112, 0xF373 },     /* R112 - EQ15 */
 137         { 113, 0x0A54 },     /* R113 - EQ16 */
 138         { 114, 0x0558 },     /* R114 - EQ17 */
 139         { 115, 0x168E },     /* R115 - EQ18 */
 140         { 116, 0xF829 },     /* R116 - EQ19 */
 141         { 117, 0x07AD },     /* R117 - EQ20 */
 142         { 118, 0x1103 },     /* R118 - EQ21 */
 143         { 119, 0x0564 },     /* R119 - EQ22 */
 144         { 120, 0x0559 },     /* R120 - EQ23 */
 145         { 121, 0x4000 },     /* R121 - EQ24 */
 146         { 122, 0x0000 },     /* R122 - Digital Pulls */
 147         { 123, 0x0F08 },     /* R123 - DRC Control 1 */
 148         { 124, 0x0000 },     /* R124 - DRC Control 2 */
 149         { 125, 0x0080 },     /* R125 - DRC Control 3 */
 150         { 126, 0x0000 },     /* R126 - DRC Control 4 */
 151 };
 152
 153 static struct {
 154         int ratio;
 155         int clk_sys_rate;
 156 } clk_sys_rates[] = {
 157         { 64,   0 },
 158         { 128,  1 },
 159         { 192,  2 },
 160         { 256,  3 },
 161         { 384,  4 },
 162         { 512,  5 },
 163         { 768,  6 },
 164         { 1024, 7 },
 165         { 1408, 8 },
 166         { 1536, 9 },
 167 };
 168
 169 static struct {
 170         int rate;
 171         int sample_rate;
 172 } sample_rates[] = {
 173         { 8000,  0  },
 174         { 11025, 1  },
 175         { 12000, 1  },
 176         { 16000, 2  },
 177         { 22050, 3  },
 178         { 24000, 3  },
 179         { 32000, 4  },
 180         { 44100, 5  },
 181         { 48000, 5  },
 182 };
 183
 184 static struct {
 185         int div; /* *10 due to .5s */
 186         int bclk_div;
 187 } bclk_divs[] = {
 188         { 10,  0  },
 189         { 15,  1  },
 190         { 20,  2  },
 191         { 30,  3  },
 192         { 40,  4  },
 193         { 55,  5  },
 194         { 60,  6  },
 195         { 80,  7  },
 196         { 110, 8  },
 197         { 120, 9  },
 198         { 160, 10 },
 199         { 220, 11 },
 200         { 240, 12 },
 201         { 320, 13 },
 202         { 440, 14 },
 203         { 480, 15 },
 204 };
 205
 206 struct wm8993_priv {
 207         struct wm_hubs_data hubs_data;
 208         struct device *dev;
 209         struct regmap *regmap;
 210         struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
 211         struct wm8993_platform_data pdata;
 212         struct completion fll_lock;
 213         int master;
 214         int sysclk_source;
 215         int tdm_slots;
 216         int tdm_width;
 217         unsigned int mclk_rate;
 218         unsigned int sysclk_rate;
 219         unsigned int fs;
 220         unsigned int bclk;
 221         unsigned int fll_fref;
 222         unsigned int fll_fout;
 223         int fll_src;
 224 };
 225
 226 static bool wm8993_volatile(struct device *dev, unsigned int reg)
 227 {
 228         switch (reg) {
 229         case WM8993_SOFTWARE_RESET:
 230         case WM8993_GPIO_CTRL_1:
 231         case WM8993_DC_SERVO_0:
 232         case WM8993_DC_SERVO_READBACK_0:
 233         case WM8993_DC_SERVO_READBACK_1:
 234         case WM8993_DC_SERVO_READBACK_2:
 235                 return true;
 236         default:
 237                 return false;
 238         }
 239 }
 240
 241 static bool wm8993_readable(struct device *dev, unsigned int reg)
 242 {
 243         switch (reg) {
 244         case WM8993_SOFTWARE_RESET:
 245         case WM8993_POWER_MANAGEMENT_1:
 246         case WM8993_POWER_MANAGEMENT_2:
 247         case WM8993_POWER_MANAGEMENT_3:
 248         case WM8993_AUDIO_INTERFACE_1:
 249         case WM8993_AUDIO_INTERFACE_2:
 250         case WM8993_CLOCKING_1:
 251         case WM8993_CLOCKING_2:
 252         case WM8993_AUDIO_INTERFACE_3:
 253         case WM8993_AUDIO_INTERFACE_4:
 254         case WM8993_DAC_CTRL:
 255         case WM8993_LEFT_DAC_DIGITAL_VOLUME:
 256         case WM8993_RIGHT_DAC_DIGITAL_VOLUME:
 257         case WM8993_DIGITAL_SIDE_TONE:
 258         case WM8993_ADC_CTRL:
 259         case WM8993_LEFT_ADC_DIGITAL_VOLUME:
 260         case WM8993_RIGHT_ADC_DIGITAL_VOLUME:
 261         case WM8993_GPIO_CTRL_1:
 262         case WM8993_GPIO1:
 263         case WM8993_IRQ_DEBOUNCE:
 264         case WM8993_GPIOCTRL_2:
 265         case WM8993_GPIO_POL:
 266         case WM8993_LEFT_LINE_INPUT_1_2_VOLUME:
 267         case WM8993_LEFT_LINE_INPUT_3_4_VOLUME:
 268         case WM8993_RIGHT_LINE_INPUT_1_2_VOLUME:
 269         case WM8993_RIGHT_LINE_INPUT_3_4_VOLUME:
 270         case WM8993_LEFT_OUTPUT_VOLUME:
 271         case WM8993_RIGHT_OUTPUT_VOLUME:
 272         case WM8993_LINE_OUTPUTS_VOLUME:
 273         case WM8993_HPOUT2_VOLUME:
 274         case WM8993_LEFT_OPGA_VOLUME:
 275         case WM8993_RIGHT_OPGA_VOLUME:
 276         case WM8993_SPKMIXL_ATTENUATION:
 277         case WM8993_SPKMIXR_ATTENUATION:
 278         case WM8993_SPKOUT_MIXERS:
 279         case WM8993_SPKOUT_BOOST:
 280         case WM8993_SPEAKER_VOLUME_LEFT:
 281         case WM8993_SPEAKER_VOLUME_RIGHT:
 282         case WM8993_INPUT_MIXER2:
 283         case WM8993_INPUT_MIXER3:
 284         case WM8993_INPUT_MIXER4:
 285         case WM8993_INPUT_MIXER5:
 286         case WM8993_INPUT_MIXER6:
 287         case WM8993_OUTPUT_MIXER1:
 288         case WM8993_OUTPUT_MIXER2:
 289         case WM8993_OUTPUT_MIXER3:
 290         case WM8993_OUTPUT_MIXER4:
 291         case WM8993_OUTPUT_MIXER5:
 292         case WM8993_OUTPUT_MIXER6:
 293         case WM8993_HPOUT2_MIXER:
 294         case WM8993_LINE_MIXER1:
 295         case WM8993_LINE_MIXER2:
 296         case WM8993_SPEAKER_MIXER:
 297         case WM8993_ADDITIONAL_CONTROL:
 298         case WM8993_ANTIPOP1:
 299         case WM8993_ANTIPOP2:
 300         case WM8993_MICBIAS:
 301         case WM8993_FLL_CONTROL_1:
 302         case WM8993_FLL_CONTROL_2:
 303         case WM8993_FLL_CONTROL_3:
 304         case WM8993_FLL_CONTROL_4:
 305         case WM8993_FLL_CONTROL_5:
 306         case WM8993_CLOCKING_3:
 307         case WM8993_CLOCKING_4:
 308         case WM8993_MW_SLAVE_CONTROL:
 309         case WM8993_BUS_CONTROL_1:
 310         case WM8993_WRITE_SEQUENCER_0:
 311         case WM8993_WRITE_SEQUENCER_1:
 312         case WM8993_WRITE_SEQUENCER_2:
 313         case WM8993_WRITE_SEQUENCER_3:
 314         case WM8993_WRITE_SEQUENCER_4:
 315         case WM8993_WRITE_SEQUENCER_5:
 316         case WM8993_CHARGE_PUMP_1:
 317         case WM8993_CLASS_W_0:
 318         case WM8993_DC_SERVO_0:
 319         case WM8993_DC_SERVO_1:
 320         case WM8993_DC_SERVO_3:
 321         case WM8993_DC_SERVO_READBACK_0:
 322         case WM8993_DC_SERVO_READBACK_1:
 323         case WM8993_DC_SERVO_READBACK_2:
 324         case WM8993_ANALOGUE_HP_0:
 325         case WM8993_EQ1:
 326         case WM8993_EQ2:
 327         case WM8993_EQ3:
 328         case WM8993_EQ4:
 329         case WM8993_EQ5:
 330         case WM8993_EQ6:
 331         case WM8993_EQ7:
 332         case WM8993_EQ8:
 333         case WM8993_EQ9:
 334         case WM8993_EQ10:
 335         case WM8993_EQ11:
 336         case WM8993_EQ12:
 337         case WM8993_EQ13:
 338         case WM8993_EQ14:
 339         case WM8993_EQ15:
 340         case WM8993_EQ16:
 341         case WM8993_EQ17:
 342         case WM8993_EQ18:
 343         case WM8993_EQ19:
 344         case WM8993_EQ20:
 345         case WM8993_EQ21:
 346         case WM8993_EQ22:
 347         case WM8993_EQ23:
 348         case WM8993_EQ24:
 349         case WM8993_DIGITAL_PULLS:
 350         case WM8993_DRC_CONTROL_1:
 351         case WM8993_DRC_CONTROL_2:
 352         case WM8993_DRC_CONTROL_3:
 353         case WM8993_DRC_CONTROL_4:
 354                 return true;
 355         default:
 356                 return false;
 357         }
 358 }
 359
 360 struct _fll_div {
 361         u16 fll_fratio;
 362         u16 fll_outdiv;
 363         u16 fll_clk_ref_div;
 364         u16 n;
 365         u16 k;
 366 };
 367
 368 /* The size in bits of the FLL divide multiplied by 10
 369  * to allow rounding later */
 370 #define FIXED_FLL_SIZE ((1 << 16) * 10)
 371
 372 static struct {
 373         unsigned int min;
 374         unsigned int max;
 375         u16 fll_fratio;
 376         int ratio;
 377 } fll_fratios[] = {
 378         {       0,    64000, 4, 16 },
 379         {   64000,   128000, 3,  8 },
 380         {  128000,   256000, 2,  4 },
 381         {  256000,  1000000, 1,  2 },
 382         { 1000000, 13500000, 0,  1 },
 383 };
 384
 385 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 386                        unsigned int Fout)
 387 {
 388         u64 Kpart;
 389         unsigned int K, Ndiv, Nmod, target;
 390         unsigned int div;
 391         int i;
 392
 393         /* Fref must be <=13.5MHz */
 394         div = 1;
 395         fll_div->fll_clk_ref_div = 0;
 396         while ((Fref / div) > 13500000) {
 397                 div *= 2;
 398                 fll_div->fll_clk_ref_div++;
 399
 400                 if (div > 8) {
 401                         pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
 402                                Fref);
 403                         return -EINVAL;
 404                 }
 405         }
 406
 407         pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
 408
 409         /* Apply the division for our remaining calculations */
 410         Fref /= div;
 411
 412         /* Fvco should be 90-100MHz; don't check the upper bound */
 413         div = 0;
 414         target = Fout * 2;
 415         while (target < 90000000) {
 416                 div++;
 417                 target *= 2;
 418                 if (div > 7) {
 419                         pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
 420                                Fout);
 421                         return -EINVAL;
 422                 }
 423         }
 424         fll_div->fll_outdiv = div;
 425
 426         pr_debug("Fvco=%dHz\n", target);
 427
 428         /* Find an appropriate FLL_FRATIO and factor it out of the target */
 429         for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
 430                 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
 431                         fll_div->fll_fratio = fll_fratios[i].fll_fratio;
 432                         target /= fll_fratios[i].ratio;
 433                         break;
 434                 }
 435         }
 436         if (i == ARRAY_SIZE(fll_fratios)) {
 437                 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
 438                 return -EINVAL;
 439         }
 440
 441         /* Now, calculate N.K */
 442         Ndiv = target / Fref;
 443
 444         fll_div->n = Ndiv;
 445         Nmod = target % Fref;
 446         pr_debug("Nmod=%d\n", Nmod);
 447
 448         /* Calculate fractional part - scale up so we can round. */
 449         Kpart = FIXED_FLL_SIZE * (long long)Nmod;
 450
 451         do_div(Kpart, Fref);
 452
 453         K = Kpart & 0xFFFFFFFF;
 454
 455         if ((K % 10) >= 5)
 456                 K += 5;
 457
 458         /* Move down to proper range now rounding is done */
 459         fll_div->k = K / 10;
 460
 461         pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
 462                  fll_div->n, fll_div->k,
 463                  fll_div->fll_fratio, fll_div->fll_outdiv,
 464                  fll_div->fll_clk_ref_div);
 465
 466         return 0;
 467 }
 468
 469 static int _wm8993_set_fll(struct snd_soc_component *component, int fll_id, int source,
 470                           unsigned int Fref, unsigned int Fout)
 471 {
 472         struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
 473         struct i2c_client *i2c = to_i2c_client(component->dev);
 474         u16 reg1, reg4, reg5;
 475         struct _fll_div fll_div;
 476         unsigned int timeout;
 477         int ret;
 478
 479         /* Any change? */
 480         if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
 481                 return 0;
 482
 483         /* Disable the FLL */
 484         if (Fout == 0) {
 485                 dev_dbg(component->dev, "FLL disabled\n");
 486                 wm8993->fll_fref = 0;
 487                 wm8993->fll_fout = 0;
 488
 489                 reg1 = snd_soc_component_read32(component, WM8993_FLL_CONTROL_1);
 490                 reg1 &= ~WM8993_FLL_ENA;
 491                 snd_soc_component_write(component, WM8993_FLL_CONTROL_1, reg1);
 492
 493                 return 0;
 494         }
 495
 496         ret = fll_factors(&fll_div, Fref, Fout);
 497         if (ret != 0)
 498                 return ret;
 499
 500         reg5 = snd_soc_component_read32(component, WM8993_FLL_CONTROL_5);
 501         reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
 502
 503         switch (fll_id) {
 504         case WM8993_FLL_MCLK:
 505                 break;
 506
 507         case WM8993_FLL_LRCLK:
 508                 reg5 |= 1;
 509                 break;
 510
 511         case WM8993_FLL_BCLK:
 512                 reg5 |= 2;
 513                 break;
 514
 515         default:
 516                 dev_err(component->dev, "Unknown FLL ID %d\n", fll_id);
 517                 return -EINVAL;
 518         }
 519
 520         /* Any FLL configuration change requires that the FLL be
 521          * disabled first. */
 522         reg1 = snd_soc_component_read32(component, WM8993_FLL_CONTROL_1);
 523         reg1 &= ~WM8993_FLL_ENA;
 524         snd_soc_component_write(component, WM8993_FLL_CONTROL_1, reg1);
 525
 526         /* Apply the configuration */
 527         if (fll_div.k)
 528                 reg1 |= WM8993_FLL_FRAC_MASK;
 529         else
 530                 reg1 &= ~WM8993_FLL_FRAC_MASK;
 531         snd_soc_component_write(component, WM8993_FLL_CONTROL_1, reg1);
 532
 533         snd_soc_component_write(component, WM8993_FLL_CONTROL_2,
 534                       (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
 535                       (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
 536         snd_soc_component_write(component, WM8993_FLL_CONTROL_3, fll_div.k);
 537
 538         reg4 = snd_soc_component_read32(component, WM8993_FLL_CONTROL_4);
 539         reg4 &= ~WM8993_FLL_N_MASK;
 540         reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
 541         snd_soc_component_write(component, WM8993_FLL_CONTROL_4, reg4);
 542
 543         reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
 544         reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
 545         snd_soc_component_write(component, WM8993_FLL_CONTROL_5, reg5);
 546
 547         /* If we've got an interrupt wired up make sure we get it */
 548         if (i2c->irq)
 549                 timeout = msecs_to_jiffies(20);
 550         else if (Fref < 1000000)
 551                 timeout = msecs_to_jiffies(3);
 552         else
 553                 timeout = msecs_to_jiffies(1);
 554
 555         try_wait_for_completion(&wm8993->fll_lock);
 556
 557         /* Enable the FLL */
 558         snd_soc_component_write(component, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
 559
 560         timeout = wait_for_completion_timeout(&wm8993->fll_lock, timeout);
 561         if (i2c->irq && !timeout)
 562                 dev_warn(component->dev, "Timed out waiting for FLL\n");
 563
 564         dev_dbg(component->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
 565
 566         wm8993->fll_fref = Fref;
 567         wm8993->fll_fout = Fout;
 568         wm8993->fll_src = source;
 569
 570         return 0;
 571 }
 572
 573 static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
 574                           unsigned int Fref, unsigned int Fout)
 575 {
 576         return _wm8993_set_fll(dai->component, fll_id, source, Fref, Fout);
 577 }
 578
 579 static int configure_clock(struct snd_soc_component *component)
 580 {
 581         struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
 582         unsigned int reg;
 583
 584         /* This should be done on init() for bypass paths */
 585         switch (wm8993->sysclk_source) {
 586         case WM8993_SYSCLK_MCLK:
 587                 dev_dbg(component->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
 588
 589                 reg = snd_soc_component_read32(component, WM8993_CLOCKING_2);
 590                 reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
 591                 if (wm8993->mclk_rate > 13500000) {
 592                         reg |= WM8993_MCLK_DIV;
 593                         wm8993->sysclk_rate = wm8993->mclk_rate / 2;
 594                 } else {
 595                         reg &= ~WM8993_MCLK_DIV;
 596                         wm8993->sysclk_rate = wm8993->mclk_rate;
 597                 }
 598                 snd_soc_component_write(component, WM8993_CLOCKING_2, reg);
 599                 break;
 600
 601         case WM8993_SYSCLK_FLL:
 602                 dev_dbg(component->dev, "Using %dHz FLL clock\n",
 603                         wm8993->fll_fout);
 604
 605                 reg = snd_soc_component_read32(component, WM8993_CLOCKING_2);
 606                 reg |= WM8993_SYSCLK_SRC;
 607                 if (wm8993->fll_fout > 13500000) {
 608                         reg |= WM8993_MCLK_DIV;
 609                         wm8993->sysclk_rate = wm8993->fll_fout / 2;
 610                 } else {
 611                         reg &= ~WM8993_MCLK_DIV;
 612                         wm8993->sysclk_rate = wm8993->fll_fout;
 613                 }
 614                 snd_soc_component_write(component, WM8993_CLOCKING_2, reg);
 615                 break;
 616
 617         default:
 618                 dev_err(component->dev, "System clock not configured\n");
 619                 return -EINVAL;
 620         }
 621
 622         dev_dbg(component->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
 623
 624         return 0;
 625 }
 626
 627 static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
 628 static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
 629 static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
 630 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
 631 static const DECLARE_TLV_DB_RANGE(drc_max_tlv,
 632         0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
 633         3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0)
 634 );
 635 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
 636 static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
 637 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 638 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
 639 static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
 640
 641 static const char *dac_deemph_text[] = {
 642         "None",
 643         "32kHz",
 644         "44.1kHz",
 645         "48kHz",
 646 };
 647
 648 static SOC_ENUM_SINGLE_DECL(dac_deemph,
 649                             WM8993_DAC_CTRL, 4, dac_deemph_text);
 650
 651 static const char *adc_hpf_text[] = {
 652         "Hi-Fi",
 653         "Voice 1",
 654         "Voice 2",
 655         "Voice 3",
 656 };
 657
 658 static SOC_ENUM_SINGLE_DECL(adc_hpf,
 659                             WM8993_ADC_CTRL, 5, adc_hpf_text);
 660
 661 static const char *drc_path_text[] = {
 662         "ADC",
 663         "DAC"
 664 };
 665
 666 static SOC_ENUM_SINGLE_DECL(drc_path,
 667                             WM8993_DRC_CONTROL_1, 14, drc_path_text);
 668
 669 static const char *drc_r0_text[] = {
 670         "1",
 671         "1/2",
 672         "1/4",
 673         "1/8",
 674         "1/16",
 675         "0",
 676 };
 677
 678 static SOC_ENUM_SINGLE_DECL(drc_r0,
 679                             WM8993_DRC_CONTROL_3, 8, drc_r0_text);
 680
 681 static const char *drc_r1_text[] = {
 682         "1",
 683         "1/2",
 684         "1/4",
 685         "1/8",
 686         "0",
 687 };
 688
 689 static SOC_ENUM_SINGLE_DECL(drc_r1,
 690                             WM8993_DRC_CONTROL_4, 13, drc_r1_text);
 691
 692 static const char *drc_attack_text[] = {
 693         "Reserved",
 694         "181us",
 695         "363us",
 696         "726us",
 697         "1.45ms",
 698         "2.9ms",
 699         "5.8ms",
 700         "11.6ms",
 701         "23.2ms",
 702         "46.4ms",
 703         "92.8ms",
 704         "185.6ms",
 705 };
 706
 707 static SOC_ENUM_SINGLE_DECL(drc_attack,
 708                             WM8993_DRC_CONTROL_2, 12, drc_attack_text);
 709
 710 static const char *drc_decay_text[] = {
 711         "186ms",
 712         "372ms",
 713         "743ms",
 714         "1.49s",
 715         "2.97ms",
 716         "5.94ms",
 717         "11.89ms",
 718         "23.78ms",
 719         "47.56ms",
 720 };
 721
 722 static SOC_ENUM_SINGLE_DECL(drc_decay,
 723                             WM8993_DRC_CONTROL_2, 8, drc_decay_text);
 724
 725 static const char *drc_ff_text[] = {
 726         "5 samples",
 727         "9 samples",
 728 };
 729
 730 static SOC_ENUM_SINGLE_DECL(drc_ff,
 731                             WM8993_DRC_CONTROL_3, 7, drc_ff_text);
 732
 733 static const char *drc_qr_rate_text[] = {
 734         "0.725ms",
 735         "1.45ms",
 736         "5.8ms",
 737 };
 738
 739 static SOC_ENUM_SINGLE_DECL(drc_qr_rate,
 740                             WM8993_DRC_CONTROL_3, 0, drc_qr_rate_text);
 741
 742 static const char *drc_smooth_text[] = {
 743         "Low",
 744         "Medium",
 745         "High",
 746 };
 747
 748 static SOC_ENUM_SINGLE_DECL(drc_smooth,
 749                             WM8993_DRC_CONTROL_1, 4, drc_smooth_text);
 750
 751 static const struct snd_kcontrol_new wm8993_snd_controls[] = {
 752 SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
 753                5, 9, 12, 0, sidetone_tlv),
 754
 755 SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
 756 SOC_ENUM("DRC Path", drc_path),
 757 SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2,
 758                2, 60, 1, drc_comp_threash),
 759 SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
 760                11, 30, 1, drc_comp_amp),
 761 SOC_ENUM("DRC R0", drc_r0),
 762 SOC_ENUM("DRC R1", drc_r1),
 763 SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
 764                drc_min_tlv),
 765 SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
 766                drc_max_tlv),
 767 SOC_ENUM("DRC Attack Rate", drc_attack),
 768 SOC_ENUM("DRC Decay Rate", drc_decay),
 769 SOC_ENUM("DRC FF Delay", drc_ff),
 770 SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
 771 SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
 772 SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
 773                drc_qr_tlv),
 774 SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
 775 SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
 776 SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
 777 SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth),
 778 SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
 779                drc_startup_tlv),
 780
 781 SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
 782
 783 SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
 784                  WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
 785 SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
 786 SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
 787
 788 SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
 789                  WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
 790 SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
 791                dac_boost_tlv),
 792 SOC_ENUM("DAC Deemphasis", dac_deemph),
 793
 794 SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
 795                2, 1, 1, wm_hubs_spkmix_tlv),
 796
 797 SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
 798                2, 1, 1, wm_hubs_spkmix_tlv),
 799 };
 800
 801 static const struct snd_kcontrol_new wm8993_eq_controls[] = {
 802 SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
 803 SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
 804 SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
 805 SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
 806 SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
 807 };
 808
 809 static int clk_sys_event(struct snd_soc_dapm_widget *w,
 810                          struct snd_kcontrol *kcontrol, int event)
 811 {
 812         struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
 813
 814         switch (event) {
 815         case SND_SOC_DAPM_PRE_PMU:
 816                 return configure_clock(component);
 817
 818         case SND_SOC_DAPM_POST_PMD:
 819                 break;
 820         }
 821
 822         return 0;
 823 }
 824
 825 static const struct snd_kcontrol_new left_speaker_mixer[] = {
 826 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
 827 SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
 828 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
 829 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
 830 };
 831
 832 static const struct snd_kcontrol_new right_speaker_mixer[] = {
 833 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
 834 SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
 835 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
 836 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
 837 };
 838
 839 static const char *aif_text[] = {
 840         "Left", "Right"
 841 };
 842
 843 static SOC_ENUM_SINGLE_DECL(aifoutl_enum,
 844                             WM8993_AUDIO_INTERFACE_1, 15, aif_text);
 845
 846 static const struct snd_kcontrol_new aifoutl_mux =
 847         SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
 848
 849 static SOC_ENUM_SINGLE_DECL(aifoutr_enum,
 850                             WM8993_AUDIO_INTERFACE_1, 14, aif_text);
 851
 852 static const struct snd_kcontrol_new aifoutr_mux =
 853         SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
 854
 855 static SOC_ENUM_SINGLE_DECL(aifinl_enum,
 856                             WM8993_AUDIO_INTERFACE_2, 15, aif_text);
 857
 858 static const struct snd_kcontrol_new aifinl_mux =
 859         SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
 860
 861 static SOC_ENUM_SINGLE_DECL(aifinr_enum,
 862                             WM8993_AUDIO_INTERFACE_2, 14, aif_text);
 863
 864 static const struct snd_kcontrol_new aifinr_mux =
 865         SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
 866
 867 static const char *sidetone_text[] = {
 868         "None", "Left", "Right"
 869 };
 870
 871 static SOC_ENUM_SINGLE_DECL(sidetonel_enum,
 872                             WM8993_DIGITAL_SIDE_TONE, 2, sidetone_text);
 873
 874 static const struct snd_kcontrol_new sidetonel_mux =
 875         SOC_DAPM_ENUM("Left Sidetone", sidetonel_enum);
 876
 877 static SOC_ENUM_SINGLE_DECL(sidetoner_enum,
 878                             WM8993_DIGITAL_SIDE_TONE, 0, sidetone_text);
 879
 880 static const struct snd_kcontrol_new sidetoner_mux =
 881         SOC_DAPM_ENUM("Right Sidetone", sidetoner_enum);
 882
 883 static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
 884 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
 885                     SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
 886 SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
 887 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
 888 SND_SOC_DAPM_SUPPLY("VMID", SND_SOC_NOPM, 0, 0, NULL, 0),
 889
 890 SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
 891 SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
 892
 893 SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
 894 SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
 895
 896 SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
 897 SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
 898
 899 SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
 900 SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
 901
 902 SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
 903 SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
 904
 905 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &sidetonel_mux),
 906 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &sidetoner_mux),
 907
 908 SND_SOC_DAPM_DAC("DACL", NULL, WM8993_POWER_MANAGEMENT_3, 1, 0),
 909 SND_SOC_DAPM_DAC("DACR", NULL, WM8993_POWER_MANAGEMENT_3, 0, 0),
 910
 911 SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &wm_hubs_hpl_mux),
 912 SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &wm_hubs_hpr_mux),
 913
 914 SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
 915                    left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
 916 SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
 917                    right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
 918 SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
 919 };
 920
 921 static const struct snd_soc_dapm_route routes[] = {
 922         { "MICBIAS1", NULL, "VMID" },
 923         { "MICBIAS2", NULL, "VMID" },
 924
 925         { "ADCL", NULL, "CLK_SYS" },
 926         { "ADCL", NULL, "CLK_DSP" },
 927         { "ADCR", NULL, "CLK_SYS" },
 928         { "ADCR", NULL, "CLK_DSP" },
 929
 930         { "AIFOUTL Mux", "Left", "ADCL" },
 931         { "AIFOUTL Mux", "Right", "ADCR" },
 932         { "AIFOUTR Mux", "Left", "ADCL" },
 933         { "AIFOUTR Mux", "Right", "ADCR" },
 934
 935         { "AIFOUTL", NULL, "AIFOUTL Mux" },
 936         { "AIFOUTR", NULL, "AIFOUTR Mux" },
 937
 938         { "DACL Mux", "Left", "AIFINL" },
 939         { "DACL Mux", "Right", "AIFINR" },
 940         { "DACR Mux", "Left", "AIFINL" },
 941         { "DACR Mux", "Right", "AIFINR" },
 942
 943         { "DACL Sidetone", "Left", "ADCL" },
 944         { "DACL Sidetone", "Right", "ADCR" },
 945         { "DACR Sidetone", "Left", "ADCL" },
 946         { "DACR Sidetone", "Right", "ADCR" },
 947
 948         { "DACL", NULL, "CLK_SYS" },
 949         { "DACL", NULL, "CLK_DSP" },
 950         { "DACL", NULL, "DACL Mux" },
 951         { "DACL", NULL, "DACL Sidetone" },
 952         { "DACR", NULL, "CLK_SYS" },
 953         { "DACR", NULL, "CLK_DSP" },
 954         { "DACR", NULL, "DACR Mux" },
 955         { "DACR", NULL, "DACR Sidetone" },
 956
 957         { "Left Output Mixer", "DAC Switch", "DACL" },
 958
 959         { "Right Output Mixer", "DAC Switch", "DACR" },
 960
 961         { "Left Output PGA", NULL, "CLK_SYS" },
 962
 963         { "Right Output PGA", NULL, "CLK_SYS" },
 964
 965         { "SPKL", "DAC Switch", "DACL" },
 966         { "SPKL", NULL, "CLK_SYS" },
 967
 968         { "SPKR", "DAC Switch", "DACR" },
 969         { "SPKR", NULL, "CLK_SYS" },
 970
 971         { "Left Headphone Mux", "DAC", "DACL" },
 972         { "Right Headphone Mux", "DAC", "DACR" },
 973 };
 974
 975 static int wm8993_set_bias_level(struct snd_soc_component *component,
 976                                  enum snd_soc_bias_level level)
 977 {
 978         struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
 979         int ret;
 980
 981         wm_hubs_set_bias_level(component, level);
 982
 983         switch (level) {
 984         case SND_SOC_BIAS_ON:
 985         case SND_SOC_BIAS_PREPARE:
 986                 /* VMID=2*40k */
 987                 snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_1,
 988                                     WM8993_VMID_SEL_MASK, 0x2);
 989                 snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_2,
 990                                     WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
 991                 break;
 992
 993         case SND_SOC_BIAS_STANDBY:
 994                 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
 995                         ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
 996                                                     wm8993->supplies);
 997                         if (ret != 0)
 998                                 return ret;
 999
1000                         regcache_cache_only(wm8993->regmap, false);
1001                         regcache_sync(wm8993->regmap);
1002
1003                         wm_hubs_vmid_ena(component);
1004
1005                         /* Bring up VMID with fast soft start */
1006                         snd_soc_component_update_bits(component, WM8993_ANTIPOP2,
1007                                             WM8993_STARTUP_BIAS_ENA |
1008                                             WM8993_VMID_BUF_ENA |
1009                                             WM8993_VMID_RAMP_MASK |
1010                                             WM8993_BIAS_SRC,
1011                                             WM8993_STARTUP_BIAS_ENA |
1012                                             WM8993_VMID_BUF_ENA |
1013                                             WM8993_VMID_RAMP_MASK |
1014                                             WM8993_BIAS_SRC);
1015
1016                         /* If either line output is single ended we
1017                          * need the VMID buffer */
1018                         if (!wm8993->pdata.lineout1_diff ||
1019                             !wm8993->pdata.lineout2_diff)
1020                                 snd_soc_component_update_bits(component, WM8993_ANTIPOP1,
1021                                                  WM8993_LINEOUT_VMID_BUF_ENA,
1022                                                  WM8993_LINEOUT_VMID_BUF_ENA);
1023
1024                         /* VMID=2*40k */
1025                         snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_1,
1026                                             WM8993_VMID_SEL_MASK |
1027                                             WM8993_BIAS_ENA,
1028                                             WM8993_BIAS_ENA | 0x2);
1029                         msleep(32);
1030
1031                         /* Switch to normal bias */
1032                         snd_soc_component_update_bits(component, WM8993_ANTIPOP2,
1033                                             WM8993_BIAS_SRC |
1034                                             WM8993_STARTUP_BIAS_ENA, 0);
1035                 }
1036
1037                 /* VMID=2*240k */
1038                 snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_1,
1039                                     WM8993_VMID_SEL_MASK, 0x4);
1040
1041                 snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_2,
1042                                     WM8993_TSHUT_ENA, 0);
1043                 break;
1044
1045         case SND_SOC_BIAS_OFF:
1046                 snd_soc_component_update_bits(component, WM8993_ANTIPOP1,
1047                                     WM8993_LINEOUT_VMID_BUF_ENA, 0);
1048
1049                 snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_1,
1050                                     WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
1051                                     0);
1052
1053                 snd_soc_component_update_bits(component, WM8993_ANTIPOP2,
1054                                     WM8993_STARTUP_BIAS_ENA |
1055                                     WM8993_VMID_BUF_ENA |
1056                                     WM8993_VMID_RAMP_MASK |
1057                                     WM8993_BIAS_SRC, 0);
1058
1059                 regcache_cache_only(wm8993->regmap, true);
1060                 regcache_mark_dirty(wm8993->regmap);
1061
1062                 regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies),
1063                                        wm8993->supplies);
1064                 break;
1065         }
1066
1067         return 0;
1068 }
1069
1070 static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
1071                              int clk_id, unsigned int freq, int dir)
1072 {
1073         struct snd_soc_component *component = codec_dai->component;
1074         struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1075
1076         switch (clk_id) {
1077         case WM8993_SYSCLK_MCLK:
1078                 wm8993->mclk_rate = freq;
1079                 /* fall through */
1080         case WM8993_SYSCLK_FLL:
1081                 wm8993->sysclk_source = clk_id;
1082                 break;
1083
1084         default:
1085                 return -EINVAL;
1086         }
1087
1088         return 0;
1089 }
1090
1091 static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
1092                               unsigned int fmt)
1093 {
1094         struct snd_soc_component *component = dai->component;
1095         struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1096         unsigned int aif1 = snd_soc_component_read32(component, WM8993_AUDIO_INTERFACE_1);
1097         unsigned int aif4 = snd_soc_component_read32(component, WM8993_AUDIO_INTERFACE_4);
1098
1099         aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
1100                   WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
1101         aif4 &= ~WM8993_LRCLK_DIR;
1102
1103         switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1104         case SND_SOC_DAIFMT_CBS_CFS:
1105                 wm8993->master = 0;
1106                 break;
1107         case SND_SOC_DAIFMT_CBS_CFM:
1108                 aif4 |= WM8993_LRCLK_DIR;
1109                 wm8993->master = 1;
1110                 break;
1111         case SND_SOC_DAIFMT_CBM_CFS:
1112                 aif1 |= WM8993_BCLK_DIR;
1113                 wm8993->master = 1;
1114                 break;
1115         case SND_SOC_DAIFMT_CBM_CFM:
1116                 aif1 |= WM8993_BCLK_DIR;
1117                 aif4 |= WM8993_LRCLK_DIR;
1118                 wm8993->master = 1;
1119                 break;
1120         default:
1121                 return -EINVAL;
1122         }
1123
1124         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1125         case SND_SOC_DAIFMT_DSP_B:
1126                 aif1 |= WM8993_AIF_LRCLK_INV;
1127                 /* fall through */
1128         case SND_SOC_DAIFMT_DSP_A:
1129                 aif1 |= 0x18;
1130                 break;
1131         case SND_SOC_DAIFMT_I2S:
1132                 aif1 |= 0x10;
1133                 break;
1134         case SND_SOC_DAIFMT_RIGHT_J:
1135                 break;
1136         case SND_SOC_DAIFMT_LEFT_J:
1137                 aif1 |= 0x8;
1138                 break;
1139         default:
1140                 return -EINVAL;
1141         }
1142
1143         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1144         case SND_SOC_DAIFMT_DSP_A:
1145         case SND_SOC_DAIFMT_DSP_B:
1146                 /* frame inversion not valid for DSP modes */
1147                 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1148                 case SND_SOC_DAIFMT_NB_NF:
1149                         break;
1150                 case SND_SOC_DAIFMT_IB_NF:
1151                         aif1 |= WM8993_AIF_BCLK_INV;
1152                         break;
1153                 default:
1154                         return -EINVAL;
1155                 }
1156                 break;
1157
1158         case SND_SOC_DAIFMT_I2S:
1159         case SND_SOC_DAIFMT_RIGHT_J:
1160         case SND_SOC_DAIFMT_LEFT_J:
1161                 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1162                 case SND_SOC_DAIFMT_NB_NF:
1163                         break;
1164                 case SND_SOC_DAIFMT_IB_IF:
1165                         aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
1166                         break;
1167                 case SND_SOC_DAIFMT_IB_NF:
1168                         aif1 |= WM8993_AIF_BCLK_INV;
1169                         break;
1170                 case SND_SOC_DAIFMT_NB_IF:
1171                         aif1 |= WM8993_AIF_LRCLK_INV;
1172                         break;
1173                 default:
1174                         return -EINVAL;
1175                 }
1176                 break;
1177         default:
1178                 return -EINVAL;
1179         }
1180
1181         snd_soc_component_write(component, WM8993_AUDIO_INTERFACE_1, aif1);
1182         snd_soc_component_write(component, WM8993_AUDIO_INTERFACE_4, aif4);
1183
1184         return 0;
1185 }
1186
1187 static int wm8993_hw_params(struct snd_pcm_substream *substream,
1188                             struct snd_pcm_hw_params *params,
1189                             struct snd_soc_dai *dai)
1190 {
1191         struct snd_soc_component *component = dai->component;
1192         struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1193         int ret, i, best, best_val, cur_val;
1194         unsigned int clocking1, clocking3, aif1, aif4;
1195
1196         clocking1 = snd_soc_component_read32(component, WM8993_CLOCKING_1);
1197         clocking1 &= ~WM8993_BCLK_DIV_MASK;
1198
1199         clocking3 = snd_soc_component_read32(component, WM8993_CLOCKING_3);
1200         clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
1201
1202         aif1 = snd_soc_component_read32(component, WM8993_AUDIO_INTERFACE_1);
1203         aif1 &= ~WM8993_AIF_WL_MASK;
1204
1205         aif4 = snd_soc_component_read32(component, WM8993_AUDIO_INTERFACE_4);
1206         aif4 &= ~WM8993_LRCLK_RATE_MASK;
1207
1208         /* What BCLK do we need? */
1209         wm8993->fs = params_rate(params);
1210         wm8993->bclk = 2 * wm8993->fs;
1211         if (wm8993->tdm_slots) {
1212                 dev_dbg(component->dev, "Configuring for %d %d bit TDM slots\n",
1213                         wm8993->tdm_slots, wm8993->tdm_width);
1214                 wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
1215         } else {
1216                 switch (params_width(params)) {
1217                 case 16:
1218                         wm8993->bclk *= 16;
1219                         break;
1220                 case 20:
1221                         wm8993->bclk *= 20;
1222                         aif1 |= 0x8;
1223                         break;
1224                 case 24:
1225                         wm8993->bclk *= 24;
1226                         aif1 |= 0x10;
1227                         break;
1228                 case 32:
1229                         wm8993->bclk *= 32;
1230                         aif1 |= 0x18;
1231                         break;
1232                 default:
1233                         return -EINVAL;
1234                 }
1235         }
1236
1237         dev_dbg(component->dev, "Target BCLK is %dHz\n", wm8993->bclk);
1238
1239         ret = configure_clock(component);
1240         if (ret != 0)
1241                 return ret;
1242
1243         /* Select nearest CLK_SYS_RATE */
1244         best = 0;
1245         best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
1246                        - wm8993->fs);
1247         for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1248                 cur_val = abs((wm8993->sysclk_rate /
1249                                clk_sys_rates[i].ratio) - wm8993->fs);
1250                 if (cur_val < best_val) {
1251                         best = i;
1252                         best_val = cur_val;
1253                 }
1254         }
1255         dev_dbg(component->dev, "Selected CLK_SYS_RATIO of %d\n",
1256                 clk_sys_rates[best].ratio);
1257         clocking3 |= (clk_sys_rates[best].clk_sys_rate
1258                       << WM8993_CLK_SYS_RATE_SHIFT);
1259
1260         /* SAMPLE_RATE */
1261         best = 0;
1262         best_val = abs(wm8993->fs - sample_rates[0].rate);
1263         for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1264                 /* Closest match */
1265                 cur_val = abs(wm8993->fs - sample_rates[i].rate);
1266                 if (cur_val < best_val) {
1267                         best = i;
1268                         best_val = cur_val;
1269                 }
1270         }
1271         dev_dbg(component->dev, "Selected SAMPLE_RATE of %dHz\n",
1272                 sample_rates[best].rate);
1273         clocking3 |= (sample_rates[best].sample_rate
1274                       << WM8993_SAMPLE_RATE_SHIFT);
1275
1276         /* BCLK_DIV */
1277         best = 0;
1278         best_val = INT_MAX;
1279         for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1280                 cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
1281                         - wm8993->bclk;
1282                 if (cur_val < 0) /* Table is sorted */
1283                         break;
1284                 if (cur_val < best_val) {
1285                         best = i;
1286                         best_val = cur_val;
1287                 }
1288         }
1289         wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
1290         dev_dbg(component->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1291                 bclk_divs[best].div, wm8993->bclk);
1292         clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
1293
1294         /* LRCLK is a simple fraction of BCLK */
1295         dev_dbg(component->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
1296         aif4 |= wm8993->bclk / wm8993->fs;
1297
1298         snd_soc_component_write(component, WM8993_CLOCKING_1, clocking1);
1299         snd_soc_component_write(component, WM8993_CLOCKING_3, clocking3);
1300         snd_soc_component_write(component, WM8993_AUDIO_INTERFACE_1, aif1);
1301         snd_soc_component_write(component, WM8993_AUDIO_INTERFACE_4, aif4);
1302
1303         /* ReTune Mobile? */
1304         if (wm8993->pdata.num_retune_configs) {
1305                 u16 eq1 = snd_soc_component_read32(component, WM8993_EQ1);
1306                 struct wm8993_retune_mobile_setting *s;
1307
1308                 best = 0;
1309                 best_val = abs(wm8993->pdata.retune_configs[0].rate
1310                                - wm8993->fs);
1311                 for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
1312                         cur_val = abs(wm8993->pdata.retune_configs[i].rate
1313                                       - wm8993->fs);
1314                         if (cur_val < best_val) {
1315                                 best_val = cur_val;
1316                                 best = i;
1317                         }
1318                 }
1319                 s = &wm8993->pdata.retune_configs[best];
1320
1321                 dev_dbg(component->dev, "ReTune Mobile %s tuned for %dHz\n",
1322                         s->name, s->rate);
1323
1324                 /* Disable EQ while we reconfigure */
1325                 snd_soc_component_update_bits(component, WM8993_EQ1, WM8993_EQ_ENA, 0);
1326
1327                 for (i = 1; i < ARRAY_SIZE(s->config); i++)
1328                         snd_soc_component_write(component, WM8993_EQ1 + i, s->config[i]);
1329
1330                 snd_soc_component_update_bits(component, WM8993_EQ1, WM8993_EQ_ENA, eq1);
1331         }
1332
1333         return 0;
1334 }
1335
1336 static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
1337 {
1338         struct snd_soc_component *component = codec_dai->component;
1339         unsigned int reg;
1340
1341         reg = snd_soc_component_read32(component, WM8993_DAC_CTRL);
1342
1343         if (mute)
1344                 reg |= WM8993_DAC_MUTE;
1345         else
1346                 reg &= ~WM8993_DAC_MUTE;
1347
1348         snd_soc_component_write(component, WM8993_DAC_CTRL, reg);
1349
1350         return 0;
1351 }
1352
1353 static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
1354                                unsigned int rx_mask, int slots, int slot_width)
1355 {
1356         struct snd_soc_component *component = dai->component;
1357         struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1358         int aif1 = 0;
1359         int aif2 = 0;
1360
1361         /* Don't need to validate anything if we're turning off TDM */
1362         if (slots == 0) {
1363                 wm8993->tdm_slots = 0;
1364                 goto out;
1365         }
1366
1367         /* Note that we allow configurations we can't handle ourselves -
1368          * for example, we can generate clocks for slots 2 and up even if
1369          * we can't use those slots ourselves.
1370          */
1371         aif1 |= WM8993_AIFADC_TDM;
1372         aif2 |= WM8993_AIFDAC_TDM;
1373
1374         switch (rx_mask) {
1375         case 3:
1376                 break;
1377         case 0xc:
1378                 aif1 |= WM8993_AIFADC_TDM_CHAN;
1379                 break;
1380         default:
1381                 return -EINVAL;
1382         }
1383
1384
1385         switch (tx_mask) {
1386         case 3:
1387                 break;
1388         case 0xc:
1389                 aif2 |= WM8993_AIFDAC_TDM_CHAN;
1390                 break;
1391         default:
1392                 return -EINVAL;
1393         }
1394
1395 out:
1396         wm8993->tdm_width = slot_width;
1397         wm8993->tdm_slots = slots / 2;
1398
1399         snd_soc_component_update_bits(component, WM8993_AUDIO_INTERFACE_1,
1400                             WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
1401         snd_soc_component_update_bits(component, WM8993_AUDIO_INTERFACE_2,
1402                             WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
1403
1404         return 0;
1405 }
1406
1407 static irqreturn_t wm8993_irq(int irq, void *data)
1408 {
1409         struct wm8993_priv *wm8993 = data;
1410         int mask, val, ret;
1411
1412         ret = regmap_read(wm8993->regmap, WM8993_GPIO_CTRL_1, &val);
1413         if (ret != 0) {
1414                 dev_err(wm8993->dev, "Failed to read interrupt status: %d\n",
1415                         ret);
1416                 return IRQ_NONE;
1417         }
1418
1419         ret = regmap_read(wm8993->regmap, WM8993_GPIOCTRL_2, &mask);
1420         if (ret != 0) {
1421                 dev_err(wm8993->dev, "Failed to read interrupt mask: %d\n",
1422                         ret);
1423                 return IRQ_NONE;
1424         }
1425
1426         /* The IRQ pin status is visible in the register too */
1427         val &= ~(mask | WM8993_IRQ);
1428         if (!val)
1429                 return IRQ_NONE;
1430
1431         if (val & WM8993_TEMPOK_EINT)
1432                 dev_crit(wm8993->dev, "Thermal warning\n");
1433
1434         if (val & WM8993_FLL_LOCK_EINT) {
1435                 dev_dbg(wm8993->dev, "FLL locked\n");
1436                 complete(&wm8993->fll_lock);
1437         }
1438
1439         ret = regmap_write(wm8993->regmap, WM8993_GPIO_CTRL_1, val);
1440         if (ret != 0)
1441                 dev_err(wm8993->dev, "Failed to ack interrupt: %d\n", ret);
1442
1443         return IRQ_HANDLED;
1444 }
1445
1446 static const struct snd_soc_dai_ops wm8993_ops = {
1447         .set_sysclk = wm8993_set_sysclk,
1448         .set_fmt = wm8993_set_dai_fmt,
1449         .hw_params = wm8993_hw_params,
1450         .digital_mute = wm8993_digital_mute,
1451         .set_pll = wm8993_set_fll,
1452         .set_tdm_slot = wm8993_set_tdm_slot,
1453 };
1454
1455 #define WM8993_RATES SNDRV_PCM_RATE_8000_48000
1456
1457 #define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
1458                         SNDRV_PCM_FMTBIT_S20_3LE |\
1459                         SNDRV_PCM_FMTBIT_S24_LE |\
1460                         SNDRV_PCM_FMTBIT_S32_LE)
1461
1462 static struct snd_soc_dai_driver wm8993_dai = {
1463         .name = "wm8993-hifi",
1464         .playback = {
1465                 .stream_name = "Playback",
1466                 .channels_min = 1,
1467                 .channels_max = 2,
1468                 .rates = WM8993_RATES,
1469                 .formats = WM8993_FORMATS,
1470                 .sig_bits = 24,
1471         },
1472         .capture = {
1473                  .stream_name = "Capture",
1474                  .channels_min = 1,
1475                  .channels_max = 2,
1476                  .rates = WM8993_RATES,
1477                  .formats = WM8993_FORMATS,
1478                  .sig_bits = 24,
1479          },
1480         .ops = &wm8993_ops,
1481         .symmetric_rates = 1,
1482 };
1483
1484 static int wm8993_probe(struct snd_soc_component *component)
1485 {
1486         struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1487         struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
1488
1489         wm8993->hubs_data.hp_startup_mode = 1;
1490         wm8993->hubs_data.dcs_codes_l = -2;
1491         wm8993->hubs_data.dcs_codes_r = -2;
1492         wm8993->hubs_data.series_startup = 1;
1493
1494         /* Latch volume update bits and default ZC on */
1495         snd_soc_component_update_bits(component, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
1496                             WM8993_DAC_VU, WM8993_DAC_VU);
1497         snd_soc_component_update_bits(component, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
1498                             WM8993_ADC_VU, WM8993_ADC_VU);
1499
1500         /* Manualy manage the HPOUT sequencing for independent stereo
1501          * control. */
1502         snd_soc_component_update_bits(component, WM8993_ANALOGUE_HP_0,
1503                             WM8993_HPOUT1_AUTO_PU, 0);
1504
1505         /* Use automatic clock configuration */
1506         snd_soc_component_update_bits(component, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
1507
1508         wm_hubs_handle_analogue_pdata(component, wm8993->pdata.lineout1_diff,
1509                                       wm8993->pdata.lineout2_diff,
1510                                       wm8993->pdata.lineout1fb,
1511                                       wm8993->pdata.lineout2fb,
1512                                       wm8993->pdata.jd_scthr,
1513                                       wm8993->pdata.jd_thr,
1514                                       wm8993->pdata.micbias1_delay,
1515                                       wm8993->pdata.micbias2_delay,
1516                                       wm8993->pdata.micbias1_lvl,
1517                                       wm8993->pdata.micbias2_lvl);
1518
1519         snd_soc_add_component_controls(component, wm8993_snd_controls,
1520                              ARRAY_SIZE(wm8993_snd_controls));
1521         if (wm8993->pdata.num_retune_configs != 0) {
1522                 dev_dbg(component->dev, "Using ReTune Mobile\n");
1523         } else {
1524                 dev_dbg(component->dev, "No ReTune Mobile, using normal EQ\n");
1525                 snd_soc_add_component_controls(component, wm8993_eq_controls,
1526                                      ARRAY_SIZE(wm8993_eq_controls));
1527         }
1528
1529         snd_soc_dapm_new_controls(dapm, wm8993_dapm_widgets,
1530                                   ARRAY_SIZE(wm8993_dapm_widgets));
1531         wm_hubs_add_analogue_controls(component);
1532
1533         snd_soc_dapm_add_routes(dapm, routes, ARRAY_SIZE(routes));
1534         wm_hubs_add_analogue_routes(component, wm8993->pdata.lineout1_diff,
1535                                     wm8993->pdata.lineout2_diff);
1536
1537         /* If the line outputs are differential then we aren't presenting
1538          * VMID as an output and can disable it.
1539          */
1540         if (wm8993->pdata.lineout1_diff && wm8993->pdata.lineout2_diff)
1541                 dapm->idle_bias_off = 1;
1542
1543         return 0;
1544
1545 }
1546
1547 #ifdef CONFIG_PM
1548 static int wm8993_suspend(struct snd_soc_component *component)
1549 {
1550         struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1551         int fll_fout = wm8993->fll_fout;
1552         int fll_fref  = wm8993->fll_fref;
1553         int ret;
1554
1555         /* Stop the FLL in an orderly fashion */
1556         ret = _wm8993_set_fll(component, 0, 0, 0, 0);
1557         if (ret != 0) {
1558                 dev_err(component->dev, "Failed to stop FLL\n");
1559                 return ret;
1560         }
1561
1562         wm8993->fll_fout = fll_fout;
1563         wm8993->fll_fref = fll_fref;
1564
1565         snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
1566
1567         return 0;
1568 }
1569
1570 static int wm8993_resume(struct snd_soc_component *component)
1571 {
1572         struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1573         int ret;
1574
1575         snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY);
1576
1577         /* Restart the FLL? */
1578         if (wm8993->fll_fout) {
1579                 int fll_fout = wm8993->fll_fout;
1580                 int fll_fref  = wm8993->fll_fref;
1581
1582                 wm8993->fll_fref = 0;
1583                 wm8993->fll_fout = 0;
1584
1585                 ret = _wm8993_set_fll(component, 0, wm8993->fll_src,
1586                                      fll_fref, fll_fout);
1587                 if (ret != 0)
1588                         dev_err(component->dev, "Failed to restart FLL\n");
1589         }
1590
1591         return 0;
1592 }
1593 #else
1594 #define wm8993_suspend NULL
1595 #define wm8993_resume NULL
1596 #endif
1597
1598 /* Tune DC servo configuration */
1599 static const struct reg_sequence wm8993_regmap_patch[] = {
1600         { 0x44, 3 },
1601         { 0x56, 3 },
1602         { 0x44, 0 },
1603 };
1604
1605 static const struct regmap_config wm8993_regmap = {
1606         .reg_bits = 8,
1607         .val_bits = 16,
1608
1609         .max_register = WM8993_MAX_REGISTER,
1610         .volatile_reg = wm8993_volatile,
1611         .readable_reg = wm8993_readable,
1612
1613         .cache_type = REGCACHE_RBTREE,
1614         .reg_defaults = wm8993_reg_defaults,
1615         .num_reg_defaults = ARRAY_SIZE(wm8993_reg_defaults),
1616 };
1617
1618 static const struct snd_soc_component_driver soc_component_dev_wm8993 = {
1619         .probe                  = wm8993_probe,
1620         .suspend                = wm8993_suspend,
1621         .resume                 = wm8993_resume,
1622         .set_bias_level         = wm8993_set_bias_level,
1623         .idle_bias_on           = 1,
1624         .use_pmdown_time        = 1,
1625         .endianness             = 1,
1626         .non_legacy_dai_naming  = 1,
1627 };
1628
1629 static int wm8993_i2c_probe(struct i2c_client *i2c,
1630                             const struct i2c_device_id *id)
1631 {
1632         struct wm8993_priv *wm8993;
1633         unsigned int reg;
1634         int ret, i;
1635
1636         wm8993 = devm_kzalloc(&i2c->dev, sizeof(struct wm8993_priv),
1637                               GFP_KERNEL);
1638         if (wm8993 == NULL)
1639                 return -ENOMEM;
1640
1641         wm8993->dev = &i2c->dev;
1642         init_completion(&wm8993->fll_lock);
1643
1644         wm8993->regmap = devm_regmap_init_i2c(i2c, &wm8993_regmap);
1645         if (IS_ERR(wm8993->regmap)) {
1646                 ret = PTR_ERR(wm8993->regmap);
1647                 dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret);
1648                 return ret;
1649         }
1650
1651         i2c_set_clientdata(i2c, wm8993);
1652
1653         for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++)
1654                 wm8993->supplies[i].supply = wm8993_supply_names[i];
1655
1656         ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8993->supplies),
1657                                  wm8993->supplies);
1658         if (ret != 0) {
1659                 dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
1660                 return ret;
1661         }
1662
1663         ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
1664                                     wm8993->supplies);
1665         if (ret != 0) {
1666                 dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
1667                 return ret;
1668         }
1669
1670         ret = regmap_read(wm8993->regmap, WM8993_SOFTWARE_RESET, &reg);
1671         if (ret != 0) {
1672                 dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
1673                 goto err_enable;
1674         }
1675
1676         if (reg != 0x8993) {
1677                 dev_err(&i2c->dev, "Invalid ID register value %x\n", reg);
1678                 ret = -EINVAL;
1679                 goto err_enable;
1680         }
1681
1682         ret = regmap_write(wm8993->regmap, WM8993_SOFTWARE_RESET, 0xffff);
1683         if (ret != 0)
1684                 goto err_enable;
1685
1686         ret = regmap_register_patch(wm8993->regmap, wm8993_regmap_patch,
1687                                     ARRAY_SIZE(wm8993_regmap_patch));
1688         if (ret != 0)
1689                 dev_warn(wm8993->dev, "Failed to apply regmap patch: %d\n",
1690                          ret);
1691
1692         if (i2c->irq) {
1693                 /* Put GPIO1 into interrupt mode (only GPIO1 can output IRQ) */
1694                 ret = regmap_update_bits(wm8993->regmap, WM8993_GPIO1,
1695                                          WM8993_GPIO1_PD |
1696                                          WM8993_GPIO1_SEL_MASK, 7);
1697                 if (ret != 0)
1698                         goto err_enable;
1699
1700                 ret = request_threaded_irq(i2c->irq, NULL, wm8993_irq,
1701                                            IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
1702                                            "wm8993", wm8993);
1703                 if (ret != 0)
1704                         goto err_enable;
1705
1706         }
1707
1708         regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1709
1710         regcache_cache_only(wm8993->regmap, true);
1711
1712         ret = devm_snd_soc_register_component(&i2c->dev,
1713                         &soc_component_dev_wm8993, &wm8993_dai, 1);
1714         if (ret != 0) {
1715                 dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
1716                 goto err_irq;
1717         }
1718
1719         return 0;
1720
1721 err_irq:
1722         if (i2c->irq)
1723                 free_irq(i2c->irq, wm8993);
1724 err_enable:
1725         regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1726         return ret;
1727 }
1728
1729 static int wm8993_i2c_remove(struct i2c_client *i2c)
1730 {
1731         struct wm8993_priv *wm8993 = i2c_get_clientdata(i2c);
1732
1733         if (i2c->irq)
1734                 free_irq(i2c->irq, wm8993);
1735         regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1736
1737         return 0;
1738 }
1739
1740 static const struct i2c_device_id wm8993_i2c_id[] = {
1741         { "wm8993", 0 },
1742         { }
1743 };
1744 MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
1745
1746 static struct i2c_driver wm8993_i2c_driver = {
1747         .driver = {
1748                 .name = "wm8993",
1749         },
1750         .probe =    wm8993_i2c_probe,
1751         .remove =   wm8993_i2c_remove,
1752         .id_table = wm8993_i2c_id,
1753 };
1754
1755 module_i2c_driver(wm8993_i2c_driver);
1756
1757 MODULE_DESCRIPTION("ASoC WM8993 driver");
1758 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1759 MODULE_LICENSE("GPL");