2 * ALSA driver for ICEnsemble VT1724 (Envy24HT)
4 * Lowlevel functions for ESI Juli@ cards
6 * Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz>
7 * 2008 Pavel Hofman <dustin@seznam.cz>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26 #include <linux/delay.h>
27 #include <linux/interrupt.h>
28 #include <linux/init.h>
29 #include <linux/slab.h>
30 #include <linux/string.h>
31 #include <sound/core.h>
32 #include <sound/tlv.h>
39 struct ak4114 *ak4114;
40 unsigned int analog:1;
44 * chip addresses on I2C bus
46 #define AK4114_ADDR 0x20 /* S/PDIF receiver */
47 #define AK4358_ADDR 0x22 /* DAC */
50 * Juli does not use the standard ICE1724 clock scheme. Juli's ice1724 chip is
51 * supplied by external clock provided by Xilinx array and MK73-1 PLL frequency
52 * multiplier. Actual frequency is set by ice1724 GPIOs hooked to the Xilinx.
54 * The clock circuitry is supplied by the two ice1724 crystals. This
55 * arrangement allows to generate independent clock signal for AK4114's input
56 * rate detection circuit. As a result, Juli, unlike most other
57 * ice1724+ak4114-based cards, detects spdif input rate correctly.
58 * This fact is applied in the driver, allowing to modify PCM stream rate
59 * parameter according to the actual input rate.
61 * Juli uses the remaining three stereo-channels of its DAC to optionally
62 * monitor analog input, digital input, and digital output. The corresponding
63 * I2S signals are routed by Xilinx, controlled by GPIOs.
65 * The master mute is implemented using output muting transistors (GPIO) in
66 * combination with smuting the DAC.
68 * The card itself has no HW master volume control, implemented using the
72 * researching and fixing the input monitors
78 #define GPIO_FREQ_MASK (3<<0)
79 #define GPIO_FREQ_32KHZ (0<<0)
80 #define GPIO_FREQ_44KHZ (1<<0)
81 #define GPIO_FREQ_48KHZ (2<<0)
82 #define GPIO_MULTI_MASK (3<<2)
83 #define GPIO_MULTI_4X (0<<2)
84 #define GPIO_MULTI_2X (1<<2)
85 #define GPIO_MULTI_1X (2<<2) /* also external */
86 #define GPIO_MULTI_HALF (3<<2)
87 #define GPIO_INTERNAL_CLOCK (1<<4) /* 0 = external, 1 = internal */
88 #define GPIO_CLOCK_MASK (1<<4)
89 #define GPIO_ANALOG_PRESENT (1<<5) /* RO only: 0 = present */
90 #define GPIO_RXMCLK_SEL (1<<7) /* must be 0 */
91 #define GPIO_AK5385A_CKS0 (1<<8)
92 #define GPIO_AK5385A_DFS1 (1<<9)
93 #define GPIO_AK5385A_DFS0 (1<<10)
94 #define GPIO_DIGOUT_MONITOR (1<<11) /* 1 = active */
95 #define GPIO_DIGIN_MONITOR (1<<12) /* 1 = active */
96 #define GPIO_ANAIN_MONITOR (1<<13) /* 1 = active */
97 #define GPIO_AK5385A_CKS1 (1<<14) /* must be 0 */
98 #define GPIO_MUTE_CONTROL (1<<15) /* output mute, 1 = muted */
100 #define GPIO_RATE_MASK (GPIO_FREQ_MASK | GPIO_MULTI_MASK | \
102 #define GPIO_AK5385A_MASK (GPIO_AK5385A_CKS0 | GPIO_AK5385A_DFS0 | \
103 GPIO_AK5385A_DFS1 | GPIO_AK5385A_CKS1)
105 #define JULI_PCM_RATE (SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
106 SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
107 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
108 SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
109 SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
111 #define GPIO_RATE_16000 (GPIO_FREQ_32KHZ | GPIO_MULTI_HALF | \
113 #define GPIO_RATE_22050 (GPIO_FREQ_44KHZ | GPIO_MULTI_HALF | \
115 #define GPIO_RATE_24000 (GPIO_FREQ_48KHZ | GPIO_MULTI_HALF | \
117 #define GPIO_RATE_32000 (GPIO_FREQ_32KHZ | GPIO_MULTI_1X | \
119 #define GPIO_RATE_44100 (GPIO_FREQ_44KHZ | GPIO_MULTI_1X | \
121 #define GPIO_RATE_48000 (GPIO_FREQ_48KHZ | GPIO_MULTI_1X | \
123 #define GPIO_RATE_64000 (GPIO_FREQ_32KHZ | GPIO_MULTI_2X | \
125 #define GPIO_RATE_88200 (GPIO_FREQ_44KHZ | GPIO_MULTI_2X | \
127 #define GPIO_RATE_96000 (GPIO_FREQ_48KHZ | GPIO_MULTI_2X | \
129 #define GPIO_RATE_176400 (GPIO_FREQ_44KHZ | GPIO_MULTI_4X | \
131 #define GPIO_RATE_192000 (GPIO_FREQ_48KHZ | GPIO_MULTI_4X | \
135 * Initial setup of the conversion array GPIO <-> rate
137 static const unsigned int juli_rates[] = {
138 16000, 22050, 24000, 32000,
139 44100, 48000, 64000, 88200,
140 96000, 176400, 192000,
143 static const unsigned int gpio_vals[] = {
144 GPIO_RATE_16000, GPIO_RATE_22050, GPIO_RATE_24000, GPIO_RATE_32000,
145 GPIO_RATE_44100, GPIO_RATE_48000, GPIO_RATE_64000, GPIO_RATE_88200,
146 GPIO_RATE_96000, GPIO_RATE_176400, GPIO_RATE_192000,
149 static const struct snd_pcm_hw_constraint_list juli_rates_info = {
150 .count = ARRAY_SIZE(juli_rates),
155 static int get_gpio_val(int rate)
158 for (i = 0; i < ARRAY_SIZE(juli_rates); i++)
159 if (juli_rates[i] == rate)
164 static void juli_ak4114_write(void *private_data, unsigned char reg,
167 snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4114_ADDR,
171 static unsigned char juli_ak4114_read(void *private_data, unsigned char reg)
173 return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data,
178 * If SPDIF capture and slaved to SPDIF-IN, setting runtime rate
179 * to the external rate
181 static void juli_spdif_in_open(struct snd_ice1712 *ice,
182 struct snd_pcm_substream *substream)
184 struct juli_spec *spec = ice->spec;
185 struct snd_pcm_runtime *runtime = substream->runtime;
188 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
189 !ice->is_spdif_master(ice))
191 rate = snd_ak4114_external_rate(spec->ak4114);
192 if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) {
193 runtime->hw.rate_min = rate;
194 runtime->hw.rate_max = rate;
202 static void juli_akm_lock(struct snd_akm4xxx *ak, int chip)
206 static void juli_akm_unlock(struct snd_akm4xxx *ak, int chip)
210 static void juli_akm_write(struct snd_akm4xxx *ak, int chip,
211 unsigned char addr, unsigned char data)
213 struct snd_ice1712 *ice = ak->private_data[0];
215 if (snd_BUG_ON(chip))
217 snd_vt1724_write_i2c(ice, AK4358_ADDR, addr, data);
221 * change the rate of envy24HT, AK4358, AK5385
223 static void juli_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate)
225 unsigned char old, tmp, ak4358_dfs;
226 unsigned int ak5385_pins, old_gpio, new_gpio;
227 struct snd_ice1712 *ice = ak->private_data[0];
228 struct juli_spec *spec = ice->spec;
230 if (rate == 0) /* no hint - S/PDIF input is master or the new spdif
231 input rate undetected, simply return */
234 /* adjust DFS on codecs */
237 ak5385_pins = GPIO_AK5385A_DFS1 | GPIO_AK5385A_CKS0;
238 } else if (rate > 48000) {
240 ak5385_pins = GPIO_AK5385A_DFS0;
245 /* AK5385 first, since it requires cold reset affecting both codecs */
246 old_gpio = ice->gpio.get_data(ice);
247 new_gpio = (old_gpio & ~GPIO_AK5385A_MASK) | ak5385_pins;
248 /* dev_dbg(ice->card->dev, "JULI - ak5385 set_rate_val: new gpio 0x%x\n",
250 ice->gpio.set_data(ice, new_gpio);
253 old = inb(ICEMT1724(ice, AC97_CMD));
254 outb(old | VT1724_AC97_COLD, ICEMT1724(ice, AC97_CMD));
256 outb(old & ~VT1724_AC97_COLD, ICEMT1724(ice, AC97_CMD));
259 /* set new value, reset DFS */
260 tmp = snd_akm4xxx_get(ak, 0, 2);
261 snd_akm4xxx_reset(ak, 1);
262 tmp = snd_akm4xxx_get(ak, 0, 2);
264 tmp |= ak4358_dfs << 4;
265 snd_akm4xxx_set(ak, 0, 2, tmp);
266 snd_akm4xxx_reset(ak, 0);
269 snd_ak4114_reinit(spec->ak4114);
272 #define AK_DAC(xname, xch) { .name = xname, .num_channels = xch }
273 #define PCM_VOLUME "PCM Playback Volume"
274 #define MONITOR_AN_IN_VOLUME "Monitor Analog In Volume"
275 #define MONITOR_DIG_IN_VOLUME "Monitor Digital In Volume"
276 #define MONITOR_DIG_OUT_VOLUME "Monitor Digital Out Volume"
278 static const struct snd_akm4xxx_dac_channel juli_dac[] = {
279 AK_DAC(PCM_VOLUME, 2),
280 AK_DAC(MONITOR_AN_IN_VOLUME, 2),
281 AK_DAC(MONITOR_DIG_OUT_VOLUME, 2),
282 AK_DAC(MONITOR_DIG_IN_VOLUME, 2),
286 static const struct snd_akm4xxx akm_juli_dac = {
288 .num_dacs = 8, /* DAC1 - analog out
289 DAC2 - analog in monitor
290 DAC3 - digital out monitor
291 DAC4 - digital in monitor
294 .lock = juli_akm_lock,
295 .unlock = juli_akm_unlock,
296 .write = juli_akm_write,
297 .set_rate_val = juli_akm_set_rate_val
299 .dac_info = juli_dac,
302 #define juli_mute_info snd_ctl_boolean_mono_info
304 static int juli_mute_get(struct snd_kcontrol *kcontrol,
305 struct snd_ctl_elem_value *ucontrol)
307 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
309 val = ice->gpio.get_data(ice) & (unsigned int) kcontrol->private_value;
310 if (kcontrol->private_value == GPIO_MUTE_CONTROL)
311 /* val 0 = signal on */
312 ucontrol->value.integer.value[0] = (val) ? 0 : 1;
314 /* val 1 = signal on */
315 ucontrol->value.integer.value[0] = (val) ? 1 : 0;
319 static int juli_mute_put(struct snd_kcontrol *kcontrol,
320 struct snd_ctl_elem_value *ucontrol)
322 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
323 unsigned int old_gpio, new_gpio;
324 old_gpio = ice->gpio.get_data(ice);
325 if (ucontrol->value.integer.value[0]) {
327 if (kcontrol->private_value == GPIO_MUTE_CONTROL) {
329 new_gpio = old_gpio & ~GPIO_MUTE_CONTROL;
331 snd_akm4xxx_write(ice->akm, 0, 0x01, 0x01);
334 new_gpio = old_gpio |
335 (unsigned int) kcontrol->private_value;
338 if (kcontrol->private_value == GPIO_MUTE_CONTROL) {
340 new_gpio = old_gpio | GPIO_MUTE_CONTROL;
342 snd_akm4xxx_write(ice->akm, 0, 0x01, 0x03);
345 new_gpio = old_gpio &
346 ~((unsigned int) kcontrol->private_value);
348 /* dev_dbg(ice->card->dev,
349 "JULI - mute/unmute: control_value: 0x%x, old_gpio: 0x%x, "
351 (unsigned int)ucontrol->value.integer.value[0], old_gpio,
353 if (old_gpio != new_gpio) {
354 ice->gpio.set_data(ice, new_gpio);
361 static struct snd_kcontrol_new juli_mute_controls[] = {
363 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
364 .name = "Master Playback Switch",
365 .info = juli_mute_info,
366 .get = juli_mute_get,
367 .put = juli_mute_put,
368 .private_value = GPIO_MUTE_CONTROL,
370 /* Although the following functionality respects the succint NDA'd
371 * documentation from the card manufacturer, and the same way of
372 * operation is coded in OSS Juli driver, only Digital Out monitor
373 * seems to work. Surprisingly, Analog input monitor outputs Digital
374 * output data. The two are independent, as enabling both doubles
375 * volume of the monitor sound.
377 * Checking traces on the board suggests the functionality described
378 * by the manufacturer is correct - I2S from ADC and AK4114
379 * go to ICE as well as to Xilinx, I2S inputs of DAC2,3,4 (the monitor
380 * inputs) are fed from Xilinx.
382 * I even checked traces on board and coded a support in driver for
383 * an alternative possibility - the unused I2S ICE output channels
384 * switched to HW-IN/SPDIF-IN and providing the monitoring signal to
385 * the DAC - to no avail. The I2S outputs seem to be unconnected.
387 * The windows driver supports the monitoring correctly.
390 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
391 .name = "Monitor Analog In Switch",
392 .info = juli_mute_info,
393 .get = juli_mute_get,
394 .put = juli_mute_put,
395 .private_value = GPIO_ANAIN_MONITOR,
398 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
399 .name = "Monitor Digital Out Switch",
400 .info = juli_mute_info,
401 .get = juli_mute_get,
402 .put = juli_mute_put,
403 .private_value = GPIO_DIGOUT_MONITOR,
406 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
407 .name = "Monitor Digital In Switch",
408 .info = juli_mute_info,
409 .get = juli_mute_get,
410 .put = juli_mute_put,
411 .private_value = GPIO_DIGIN_MONITOR,
415 static char *slave_vols[] = {
417 MONITOR_AN_IN_VOLUME,
418 MONITOR_DIG_IN_VOLUME,
419 MONITOR_DIG_OUT_VOLUME,
424 DECLARE_TLV_DB_SCALE(juli_master_db_scale, -6350, 50, 1);
426 static struct snd_kcontrol *ctl_find(struct snd_card *card,
429 struct snd_ctl_elem_id sid = {0};
431 strlcpy(sid.name, name, sizeof(sid.name));
432 sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
433 return snd_ctl_find_id(card, &sid);
436 static void add_slaves(struct snd_card *card,
437 struct snd_kcontrol *master,
440 for (; *list; list++) {
441 struct snd_kcontrol *slave = ctl_find(card, *list);
442 /* dev_dbg(card->dev, "add_slaves - %s\n", *list); */
444 /* dev_dbg(card->dev, "slave %s found\n", *list); */
445 snd_ctl_add_slave(master, slave);
450 static int juli_add_controls(struct snd_ice1712 *ice)
452 struct juli_spec *spec = ice->spec;
455 struct snd_kcontrol *vmaster;
457 err = snd_ice1712_akm4xxx_build_controls(ice);
461 for (i = 0; i < ARRAY_SIZE(juli_mute_controls); i++) {
462 err = snd_ctl_add(ice->card,
463 snd_ctl_new1(&juli_mute_controls[i], ice));
467 /* Create virtual master control */
468 vmaster = snd_ctl_make_virtual_master("Master Playback Volume",
469 juli_master_db_scale);
472 add_slaves(ice->card, vmaster, slave_vols);
473 err = snd_ctl_add(ice->card, vmaster);
477 /* only capture SPDIF over AK4114 */
478 return snd_ak4114_build(spec->ak4114, NULL,
479 ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
486 #ifdef CONFIG_PM_SLEEP
487 static int juli_resume(struct snd_ice1712 *ice)
489 struct snd_akm4xxx *ak = ice->akm;
490 struct juli_spec *spec = ice->spec;
491 /* akm4358 un-reset, un-mute */
492 snd_akm4xxx_reset(ak, 0);
494 snd_ak4114_resume(spec->ak4114);
498 static int juli_suspend(struct snd_ice1712 *ice)
500 struct snd_akm4xxx *ak = ice->akm;
501 struct juli_spec *spec = ice->spec;
502 /* akm4358 reset and soft-mute */
503 snd_akm4xxx_reset(ak, 1);
504 snd_ak4114_suspend(spec->ak4114);
510 * initialize the chip
513 static inline int juli_is_spdif_master(struct snd_ice1712 *ice)
515 return (ice->gpio.get_data(ice) & GPIO_INTERNAL_CLOCK) ? 0 : 1;
518 static unsigned int juli_get_rate(struct snd_ice1712 *ice)
521 unsigned char result;
523 result = ice->gpio.get_data(ice) & GPIO_RATE_MASK;
524 for (i = 0; i < ARRAY_SIZE(gpio_vals); i++)
525 if (gpio_vals[i] == result)
526 return juli_rates[i];
530 /* setting new rate */
531 static void juli_set_rate(struct snd_ice1712 *ice, unsigned int rate)
533 unsigned int old, new;
536 old = ice->gpio.get_data(ice);
537 new = (old & ~GPIO_RATE_MASK) | get_gpio_val(rate);
538 /* dev_dbg(ice->card->dev, "JULI - set_rate: old %x, new %x\n",
539 old & GPIO_RATE_MASK,
540 new & GPIO_RATE_MASK); */
542 ice->gpio.set_data(ice, new);
543 /* switching to external clock - supplied by external circuits */
544 val = inb(ICEMT1724(ice, RATE));
545 outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
548 static inline unsigned char juli_set_mclk(struct snd_ice1712 *ice,
551 /* no change in master clock */
555 /* setting clock to external - SPDIF */
556 static int juli_set_spdif_clock(struct snd_ice1712 *ice, int type)
559 old = ice->gpio.get_data(ice);
560 /* external clock (= 0), multiply 1x, 48kHz */
561 ice->gpio.set_data(ice, (old & ~GPIO_RATE_MASK) | GPIO_MULTI_1X |
566 /* Called when ak4114 detects change in the input SPDIF stream */
567 static void juli_ak4114_change(struct ak4114 *ak4114, unsigned char c0,
570 struct snd_ice1712 *ice = ak4114->change_callback_private;
572 if (ice->is_spdif_master(ice) && c1) {
573 /* only for SPDIF master mode, rate was changed */
574 rate = snd_ak4114_external_rate(ak4114);
575 /* dev_dbg(ice->card->dev, "ak4114 - input rate changed to %d\n",
577 juli_akm_set_rate_val(ice->akm, rate);
581 static int juli_init(struct snd_ice1712 *ice)
583 static const unsigned char ak4114_init_vals[] = {
584 /* AK4117_REG_PWRDN */ AK4114_RST | AK4114_PWN |
585 AK4114_OCKS0 | AK4114_OCKS1,
586 /* AK4114_REQ_FORMAT */ AK4114_DIF_I24I2S,
587 /* AK4114_REG_IO0 */ AK4114_TX1E,
588 /* AK4114_REG_IO1 */ AK4114_EFH_1024 | AK4114_DIT |
590 /* AK4114_REG_INT0_MASK */ 0,
591 /* AK4114_REG_INT1_MASK */ 0
593 static const unsigned char ak4114_init_txcsb[] = {
594 0x41, 0x02, 0x2c, 0x00, 0x00
597 struct juli_spec *spec;
598 struct snd_akm4xxx *ak;
600 spec = kzalloc(sizeof(*spec), GFP_KERNEL);
605 err = snd_ak4114_create(ice->card,
608 ak4114_init_vals, ak4114_init_txcsb,
612 /* callback for codecs rate setting */
613 spec->ak4114->change_callback = juli_ak4114_change;
614 spec->ak4114->change_callback_private = ice;
615 /* AK4114 in Juli can detect external rate correctly */
616 spec->ak4114->check_flags = 0;
620 * it seems that the analog doughter board detection does not work reliably, so
621 * force the analog flag; it should be very rare (if ever) to come at Juli@
622 * used without the analog daughter board
624 spec->analog = (ice->gpio.get_data(ice) & GPIO_ANALOG_PRESENT) ? 0 : 1;
630 dev_info(ice->card->dev, "juli@: analog I/O detected\n");
631 ice->num_total_dacs = 2;
632 ice->num_total_adcs = 2;
634 ice->akm = kzalloc(sizeof(struct snd_akm4xxx), GFP_KERNEL);
639 err = snd_ice1712_akm4xxx_init(ak, &akm_juli_dac, NULL, ice);
644 /* juli is clocked by Xilinx array */
645 ice->hw_rates = &juli_rates_info;
646 ice->is_spdif_master = juli_is_spdif_master;
647 ice->get_rate = juli_get_rate;
648 ice->set_rate = juli_set_rate;
649 ice->set_mclk = juli_set_mclk;
650 ice->set_spdif_clock = juli_set_spdif_clock;
652 ice->spdif.ops.open = juli_spdif_in_open;
654 #ifdef CONFIG_PM_SLEEP
655 ice->pm_resume = juli_resume;
656 ice->pm_suspend = juli_suspend;
657 ice->pm_suspend_enabled = 1;
665 * Juli@ boards don't provide the EEPROM data except for the vendor IDs.
666 * hence the driver needs to sets up it properly.
669 static unsigned char juli_eeprom[] = {
670 [ICE_EEP2_SYSCONF] = 0x2b, /* clock 512, mpu401, 1xADC, 1xDACs,
672 [ICE_EEP2_ACLINK] = 0x80, /* I2S */
673 [ICE_EEP2_I2S] = 0xf8, /* vol, 96k, 24bit, 192k */
674 [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */
675 [ICE_EEP2_GPIO_DIR] = 0x9f, /* 5, 6:inputs; 7, 4-0 outputs*/
676 [ICE_EEP2_GPIO_DIR1] = 0xff,
677 [ICE_EEP2_GPIO_DIR2] = 0x7f,
678 [ICE_EEP2_GPIO_MASK] = 0x60, /* 5, 6: locked; 7, 4-0 writable */
679 [ICE_EEP2_GPIO_MASK1] = 0x00, /* 0-7 writable */
680 [ICE_EEP2_GPIO_MASK2] = 0x7f,
681 [ICE_EEP2_GPIO_STATE] = GPIO_FREQ_48KHZ | GPIO_MULTI_1X |
682 GPIO_INTERNAL_CLOCK, /* internal clock, multiple 1x, 48kHz*/
683 [ICE_EEP2_GPIO_STATE1] = 0x00, /* unmuted */
684 [ICE_EEP2_GPIO_STATE2] = 0x00,
688 struct snd_ice1712_card_info snd_vt1724_juli_cards[] = {
690 .subvendor = VT1724_SUBDEVICE_JULI,
693 .chip_init = juli_init,
694 .build_controls = juli_add_controls,
695 .eeprom_size = sizeof(juli_eeprom),
696 .eeprom_data = juli_eeprom,