sound/pci/emu10k1/p16v.h

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  *  Copyright (c) by James Courtier-Dutton <James@superbug.demon.co.uk>
   4  *  Driver p16v chips
   5  *
   6  *  This code was initially based on code from ALSA's emu10k1x.c which is:
   7  *  Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
   8  */
   9
  10 /********************************************************************************************************/
  11 /* Audigy2 P16V pointer-offset register set, accessed through the PTR2 and DATA2 registers              */
  12 /********************************************************************************************************/
  13
  14 /* The sample rate of the SPDIF outputs is set by modifying a register in the EMU10K2 PTR register A_SPDIF_SAMPLERATE.
  15  * The sample rate is also controlled by the same registers that control the rate of the EMU10K2 sample rate converters.
  16  */
  17
  18 /* Initially all registers from 0x00 to 0x3f have zero contents. */
  19 #define PLAYBACK_LIST_ADDR      0x00            /* Base DMA address of a list of pointers to each period/size */
  20                                                 /* One list entry: 4 bytes for DMA address,
  21                                                  * 4 bytes for period_size << 16.
  22                                                  * One list entry is 8 bytes long.
  23                                                  * One list entry for each period in the buffer.
  24                                                  */
  25 #define PLAYBACK_LIST_SIZE      0x01            /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000  */
  26 #define PLAYBACK_LIST_PTR       0x02            /* Pointer to the current period being played */
  27 #define PLAYBACK_UNKNOWN3       0x03            /* Not used */
  28 #define PLAYBACK_DMA_ADDR       0x04            /* Playback DMA address */
  29 #define PLAYBACK_PERIOD_SIZE    0x05            /* Playback period size. win2000 uses 0x04000000 */
  30 #define PLAYBACK_POINTER        0x06            /* Playback period pointer. Used with PLAYBACK_LIST_PTR to determine buffer position currently in DAC */
  31 #define PLAYBACK_FIFO_END_ADDRESS       0x07            /* Playback FIFO end address */
  32 #define PLAYBACK_FIFO_POINTER   0x08            /* Playback FIFO pointer and number of valid sound samples in cache */
  33 #define PLAYBACK_UNKNOWN9       0x09            /* Not used */
  34 #define CAPTURE_DMA_ADDR        0x10            /* Capture DMA address */
  35 #define CAPTURE_BUFFER_SIZE     0x11            /* Capture buffer size */
  36 #define CAPTURE_POINTER         0x12            /* Capture buffer pointer. Sample currently in ADC */
  37 #define CAPTURE_FIFO_POINTER    0x13            /* Capture FIFO pointer and number of valid sound samples in cache */
  38 #define CAPTURE_P16V_VOLUME1    0x14            /* Low: Capture volume 0xXXXX3030 */
  39 #define CAPTURE_P16V_VOLUME2    0x15            /* High:Has no effect on capture volume */
  40 #define CAPTURE_P16V_SOURCE     0x16            /* P16V source select. Set to 0x0700E4E5 for AC97 CAPTURE */
  41                                                 /* [0:1] Capture input 0 channel select. 0 = Capture output 0.
  42                                                  *                                       1 = Capture output 1.
  43                                                  *                                       2 = Capture output 2.
  44                                                  *                                       3 = Capture output 3.
  45                                                  * [3:2] Capture input 1 channel select. 0 = Capture output 0.
  46                                                  *                                       1 = Capture output 1.
  47                                                  *                                       2 = Capture output 2.
  48                                                  *                                       3 = Capture output 3.
  49                                                  * [5:4] Capture input 2 channel select. 0 = Capture output 0.
  50                                                  *                                       1 = Capture output 1.
  51                                                  *                                       2 = Capture output 2.
  52                                                  *                                       3 = Capture output 3.
  53                                                  * [7:6] Capture input 3 channel select. 0 = Capture output 0.
  54                                                  *                                       1 = Capture output 1.
  55                                                  *                                       2 = Capture output 2.
  56                                                  *                                       3 = Capture output 3.
  57                                                  * [9:8] Playback input 0 channel select. 0 = Play output 0.
  58                                                  *                                        1 = Play output 1.
  59                                                  *                                        2 = Play output 2.
  60                                                  *                                        3 = Play output 3.
  61                                                  * [11:10] Playback input 1 channel select. 0 = Play output 0.
  62                                                  *                                          1 = Play output 1.
  63                                                  *                                          2 = Play output 2.
  64                                                  *                                          3 = Play output 3.
  65                                                  * [13:12] Playback input 2 channel select. 0 = Play output 0.
  66                                                  *                                          1 = Play output 1.
  67                                                  *                                          2 = Play output 2.
  68                                                  *                                          3 = Play output 3.
  69                                                  * [15:14] Playback input 3 channel select. 0 = Play output 0.
  70                                                  *                                          1 = Play output 1.
  71                                                  *                                          2 = Play output 2.
  72                                                  *                                          3 = Play output 3.
  73                                                  * [19:16] Playback mixer output enable. 1 bit per channel.
  74                                                  * [23:20] Capture mixer output enable. 1 bit per channel.
  75                                                  * [26:24] FX engine channel capture 0 = 0x60-0x67.
  76                                                  *                                   1 = 0x68-0x6f.
  77                                                  *                                   2 = 0x70-0x77.
  78                                                  *                                   3 = 0x78-0x7f.
  79                                                  *                                   4 = 0x80-0x87.
  80                                                  *                                   5 = 0x88-0x8f.
  81                                                  *                                   6 = 0x90-0x97.
  82                                                  *                                   7 = 0x98-0x9f.
  83                                                  * [31:27] Not used.
  84                                                  */
  85
  86                                                 /* 0x1 = capture on.
  87                                                  * 0x100 = capture off.
  88                                                  * 0x200 = capture off.
  89                                                  * 0x1000 = capture off.
  90                                                  */
  91 #define CAPTURE_RATE_STATUS             0x17            /* Capture sample rate. Read only */
  92                                                 /* [15:0] Not used.
  93                                                  * [18:16] Channel 0 Detected sample rate. 0 - 44.1khz
  94                                                  *                               1 - 48 khz
  95                                                  *                               2 - 96 khz
  96                                                  *                               3 - 192 khz
  97                                                  *                               7 - undefined rate.
  98                                                  * [19] Channel 0. 1 - Valid, 0 - Not Valid.
  99                                                  * [22:20] Channel 1 Detected sample rate.
 100                                                  * [23] Channel 1. 1 - Valid, 0 - Not Valid.
 101                                                  * [26:24] Channel 2 Detected sample rate.
 102                                                  * [27] Channel 2. 1 - Valid, 0 - Not Valid.
 103                                                  * [30:28] Channel 3 Detected sample rate.
 104                                                  * [31] Channel 3. 1 - Valid, 0 - Not Valid.
 105                                                  */
 106 /* 0x18 - 0x1f unused */
 107 #define PLAYBACK_LAST_SAMPLE    0x20            /* The sample currently being played. Read only */
 108 /* 0x21 - 0x3f unused */
 109 #define BASIC_INTERRUPT         0x40            /* Used by both playback and capture interrupt handler */
 110                                                 /* Playback (0x1<<channel_id) Don't touch high 16bits. */
 111                                                 /* Capture  (0x100<<channel_id). not tested */
 112                                                 /* Start Playback [3:0] (one bit per channel)
 113                                                  * Start Capture [11:8] (one bit per channel)
 114                                                  * Record source select for channel 0 [18:16]
 115                                                  * Record source select for channel 1 [22:20]
 116                                                  * Record source select for channel 2 [26:24]
 117                                                  * Record source select for channel 3 [30:28]
 118                                                  * 0 - SPDIF channel.
 119                                                  * 1 - I2S channel.
 120                                                  * 2 - SRC48 channel.
 121                                                  * 3 - SRCMulti_SPDIF channel.
 122                                                  * 4 - SRCMulti_I2S channel.
 123                                                  * 5 - SPDIF channel.
 124                                                  * 6 - fxengine capture.
 125                                                  * 7 - AC97 capture.
 126                                                  */
 127                                                 /* Default 41110000.
 128                                                  * Writing 0xffffffff hangs the PC.
 129                                                  * Writing 0xffff0000 -> 77770000 so it must be some sort of route.
 130                                                  * bit 0x1 starts DMA playback on channel_id 0
 131                                                  */
 132 /* 0x41,42 take values from 0 - 0xffffffff, but have no effect on playback */
 133 /* 0x43,0x48 do not remember settings */
 134 /* 0x41-45 unused */
 135 #define WATERMARK            0x46               /* Test bit to indicate cache level usage */
 136                                                 /* Values it can have while playing on channel 0.
 137                                                  * 0000f000, 0000f004, 0000f008, 0000f00c.
 138                                                  * Readonly.
 139                                                  */
 140 /* 0x47-0x4f unused */
 141 /* 0x50-0x5f Capture cache data */
 142 #define SRCSel                  0x60            /* SRCSel. Default 0x4. Bypass P16V 0x14 */
 143                                                 /* [0] 0 = 10K2 audio, 1 = SRC48 mixer output.
 144                                                  * [2] 0 = 10K2 audio, 1 = SRCMulti SPDIF mixer output.
 145                                                  * [4] 0 = 10K2 audio, 1 = SRCMulti I2S mixer output.
 146                                                  */
 147                                                 /* SRC48 converts samples rates 44.1, 48, 96, 192 to 48 khz. */
 148                                                 /* SRCMulti converts 48khz samples rates to 44.1, 48, 96, 192 to 48. */
 149                                                 /* SRC48 and SRCMULTI sample rate select and output select. */
 150                                                 /* 0xffffffff -> 0xC0000015
 151                                                  * 0xXXXXXXX4 = Enable Front Left/Right
 152                                                  * Enable PCMs
 153                                                  */
 154
 155 /* 0x61 -> 0x6c are Volume controls */
 156 #define PLAYBACK_VOLUME_MIXER1  0x61            /* SRC48 Low to mixer input volume control. */
 157 #define PLAYBACK_VOLUME_MIXER2  0x62            /* SRC48 High to mixer input volume control. */
 158 #define PLAYBACK_VOLUME_MIXER3  0x63            /* SRCMULTI SPDIF Low to mixer input volume control. */
 159 #define PLAYBACK_VOLUME_MIXER4  0x64            /* SRCMULTI SPDIF High to mixer input volume control. */
 160 #define PLAYBACK_VOLUME_MIXER5  0x65            /* SRCMULTI I2S Low to mixer input volume control. */
 161 #define PLAYBACK_VOLUME_MIXER6  0x66            /* SRCMULTI I2S High to mixer input volume control. */
 162 #define PLAYBACK_VOLUME_MIXER7  0x67            /* P16V Low to SRCMULTI SPDIF mixer input volume control. */
 163 #define PLAYBACK_VOLUME_MIXER8  0x68            /* P16V High to SRCMULTI SPDIF mixer input volume control. */
 164 #define PLAYBACK_VOLUME_MIXER9  0x69            /* P16V Low to SRCMULTI I2S mixer input volume control. */
 165                                                 /* 0xXXXX3030 = PCM0 Volume (Front).
 166                                                  * 0x3030XXXX = PCM1 Volume (Center)
 167                                                  */
 168 #define PLAYBACK_VOLUME_MIXER10  0x6a           /* P16V High to SRCMULTI I2S mixer input volume control. */
 169                                                 /* 0x3030XXXX = PCM3 Volume (Rear). */
 170 #define PLAYBACK_VOLUME_MIXER11  0x6b           /* E10K2 Low to SRC48 mixer input volume control. */
 171 #define PLAYBACK_VOLUME_MIXER12 0x6c            /* E10K2 High to SRC48 mixer input volume control. */
 172
 173 #define SRC48_ENABLE            0x6d            /* SRC48 input audio enable */
 174                                                 /* SRC48 converts samples rates 44.1, 48, 96, 192 to 48 khz. */
 175                                                 /* [23:16] The corresponding P16V channel to SRC48 enabled if == 1.
 176                                                  * [31:24] The corresponding E10K2 channel to SRC48 enabled.
 177                                                  */
 178 #define SRCMULTI_ENABLE         0x6e            /* SRCMulti input audio enable. Default 0xffffffff */
 179                                                 /* SRCMulti converts 48khz samples rates to 44.1, 48, 96, 192 to 48. */
 180                                                 /* [7:0] The corresponding P16V channel to SRCMulti_I2S enabled if == 1.
 181                                                  * [15:8] The corresponding E10K2 channel to SRCMulti I2S enabled.
 182                                                  * [23:16] The corresponding P16V channel to SRCMulti SPDIF enabled.
 183                                                  * [31:24] The corresponding E10K2 channel to SRCMulti SPDIF enabled.
 184                                                  */
 185                                                 /* Bypass P16V 0xff00ff00
 186                                                  * Bitmap. 0 = Off, 1 = On.
 187                                                  * P16V playback outputs:
 188                                                  * 0xXXXXXXX1 = PCM0 Left. (Front)
 189                                                  * 0xXXXXXXX2 = PCM0 Right.
 190                                                  * 0xXXXXXXX4 = PCM1 Left. (Center/LFE)
 191                                                  * 0xXXXXXXX8 = PCM1 Right.
 192                                                  * 0xXXXXXX1X = PCM2 Left. (Unknown)
 193                                                  * 0xXXXXXX2X = PCM2 Right.
 194                                                  * 0xXXXXXX4X = PCM3 Left. (Rear)
 195                                                  * 0xXXXXXX8X = PCM3 Right.
 196                                                  */
 197 #define AUDIO_OUT_ENABLE        0x6f            /* Default: 000100FF */
 198                                                 /* [3:0] Does something, but not documented. Probably capture enable.
 199                                                  * [7:4] Playback channels enable. not documented.
 200                                                  * [16] AC97 output enable if == 1
 201                                                  * [30] 0 = SRCMulti_I2S input from fxengine 0x68-0x6f.
 202                                                  *      1 = SRCMulti_I2S input from SRC48 output.
 203                                                  * [31] 0 = SRCMulti_SPDIF input from fxengine 0x60-0x67.
 204                                                  *      1 = SRCMulti_SPDIF input from SRC48 output.
 205                                                  */
 206                                                 /* 0xffffffff -> C00100FF */
 207                                                 /* 0 -> Not playback sound, irq still running */
 208                                                 /* 0xXXXXXX10 = PCM0 Left/Right On. (Front)
 209                                                  * 0xXXXXXX20 = PCM1 Left/Right On. (Center/LFE)
 210                                                  * 0xXXXXXX40 = PCM2 Left/Right On. (Unknown)
 211                                                  * 0xXXXXXX80 = PCM3 Left/Right On. (Rear)
 212                                                  */
 213 #define PLAYBACK_SPDIF_SELECT     0x70          /* Default: 12030F00 */
 214                                                 /* 0xffffffff -> 3FF30FFF */
 215                                                 /* 0x00000001 pauses stream/irq fail. */
 216                                                 /* All other bits do not effect playback */
 217 #define PLAYBACK_SPDIF_SRC_SELECT 0x71          /* Default: 0000E4E4 */
 218                                                 /* 0xffffffff -> F33FFFFF */
 219                                                 /* All bits do not effect playback */
 220 #define PLAYBACK_SPDIF_USER_DATA0 0x72          /* SPDIF out user data 0 */
 221 #define PLAYBACK_SPDIF_USER_DATA1 0x73          /* SPDIF out user data 1 */
 222 /* 0x74-0x75 unknown */
 223 #define CAPTURE_SPDIF_CONTROL   0x76            /* SPDIF in control setting */
 224 #define CAPTURE_SPDIF_STATUS    0x77            /* SPDIF in status */
 225 #define CAPURE_SPDIF_USER_DATA0 0x78            /* SPDIF in user data 0 */
 226 #define CAPURE_SPDIF_USER_DATA1 0x79            /* SPDIF in user data 1 */
 227 #define CAPURE_SPDIF_USER_DATA2 0x7a            /* SPDIF in user data 2 */
 228