1 // SPDX-License-Identifier: GPL-2.0
3 #include "ddk750_reg.h"
4 #include "ddk750_mode.h"
5 #include "ddk750_chip.h"
9 * This function takes care extra registers and bit fields required to set
10 * up a mode in SM750LE
12 * Explanation about Display Control register:
13 * HW only supports 7 predefined pixel clocks, and clock select is
14 * in bit 29:27 of Display Control register.
16 static unsigned long displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
17 unsigned long dispControl)
21 x = pModeParam->horizontal_display_end;
22 y = pModeParam->vertical_display_end;
25 * SM750LE has to set up the top-left and bottom-right
27 * Note that normal SM750/SM718 only use those two register for
28 * auto-centering mode.
30 poke32(CRT_AUTO_CENTERING_TL, 0);
32 poke32(CRT_AUTO_CENTERING_BR,
33 (((y - 1) << CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT) &
34 CRT_AUTO_CENTERING_BR_BOTTOM_MASK) |
35 ((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
38 * Assume common fields in dispControl have been properly set before
39 * calling this function.
40 * This function only sets the extra fields in dispControl.
43 /* Clear bit 29:27 of display control register */
44 dispControl &= ~CRT_DISPLAY_CTRL_CLK_MASK;
46 /* Set bit 29:27 of display control register for the right clock */
47 /* Note that SM750LE only need to supported 7 resolutions. */
48 if (x == 800 && y == 600)
49 dispControl |= CRT_DISPLAY_CTRL_CLK_PLL41;
50 else if (x == 1024 && y == 768)
51 dispControl |= CRT_DISPLAY_CTRL_CLK_PLL65;
52 else if (x == 1152 && y == 864)
53 dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
54 else if (x == 1280 && y == 768)
55 dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
56 else if (x == 1280 && y == 720)
57 dispControl |= CRT_DISPLAY_CTRL_CLK_PLL74;
58 else if (x == 1280 && y == 960)
59 dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
60 else if (x == 1280 && y == 1024)
61 dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
62 else /* default to VGA clock */
63 dispControl |= CRT_DISPLAY_CTRL_CLK_PLL25;
65 /* Set bit 25:24 of display controller */
66 dispControl |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
68 /* Set bit 14 of display controller */
69 dispControl |= DISPLAY_CTRL_CLOCK_PHASE;
71 poke32(CRT_DISPLAY_CTRL, dispControl);
76 /* only timing related registers will be programed */
77 static int programModeRegisters(struct mode_parameter *pModeParam,
78 struct pll_value *pll)
82 unsigned int tmp, reg;
84 if (pll->clockType == SECONDARY_PLL) {
85 /* programe secondary pixel clock */
86 poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
88 tmp = ((pModeParam->horizontal_total - 1) <<
89 CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
90 CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
91 tmp |= (pModeParam->horizontal_display_end - 1) &
92 CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
94 poke32(CRT_HORIZONTAL_TOTAL, tmp);
96 tmp = (pModeParam->horizontal_sync_width <<
97 CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
98 CRT_HORIZONTAL_SYNC_WIDTH_MASK;
99 tmp |= (pModeParam->horizontal_sync_start - 1) &
100 CRT_HORIZONTAL_SYNC_START_MASK;
102 poke32(CRT_HORIZONTAL_SYNC, tmp);
104 tmp = ((pModeParam->vertical_total - 1) <<
105 CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
106 CRT_VERTICAL_TOTAL_TOTAL_MASK;
107 tmp |= (pModeParam->vertical_display_end - 1) &
108 CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
110 poke32(CRT_VERTICAL_TOTAL, tmp);
112 tmp = ((pModeParam->vertical_sync_height <<
113 CRT_VERTICAL_SYNC_HEIGHT_SHIFT)) &
114 CRT_VERTICAL_SYNC_HEIGHT_MASK;
115 tmp |= (pModeParam->vertical_sync_start - 1) &
116 CRT_VERTICAL_SYNC_START_MASK;
118 poke32(CRT_VERTICAL_SYNC, tmp);
120 tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
121 if (pModeParam->vertical_sync_polarity)
122 tmp |= DISPLAY_CTRL_VSYNC_PHASE;
123 if (pModeParam->horizontal_sync_polarity)
124 tmp |= DISPLAY_CTRL_HSYNC_PHASE;
126 if (sm750_get_chip_type() == SM750LE) {
127 displayControlAdjust_SM750LE(pModeParam, tmp);
129 reg = peek32(CRT_DISPLAY_CTRL) &
130 ~(DISPLAY_CTRL_VSYNC_PHASE |
131 DISPLAY_CTRL_HSYNC_PHASE |
132 DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE);
134 poke32(CRT_DISPLAY_CTRL, tmp | reg);
137 } else if (pll->clockType == PRIMARY_PLL) {
138 unsigned int reserved;
140 poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
142 reg = ((pModeParam->horizontal_total - 1) <<
143 PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
144 PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
145 reg |= ((pModeParam->horizontal_display_end - 1) &
146 PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
147 poke32(PANEL_HORIZONTAL_TOTAL, reg);
149 poke32(PANEL_HORIZONTAL_SYNC,
150 ((pModeParam->horizontal_sync_width <<
151 PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
152 PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
153 ((pModeParam->horizontal_sync_start - 1) &
154 PANEL_HORIZONTAL_SYNC_START_MASK));
156 poke32(PANEL_VERTICAL_TOTAL,
157 (((pModeParam->vertical_total - 1) <<
158 PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
159 PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
160 ((pModeParam->vertical_display_end - 1) &
161 PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
163 poke32(PANEL_VERTICAL_SYNC,
164 ((pModeParam->vertical_sync_height <<
165 PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
166 PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
167 ((pModeParam->vertical_sync_start - 1) &
168 PANEL_VERTICAL_SYNC_START_MASK));
170 tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
171 if (pModeParam->vertical_sync_polarity)
172 tmp |= DISPLAY_CTRL_VSYNC_PHASE;
173 if (pModeParam->horizontal_sync_polarity)
174 tmp |= DISPLAY_CTRL_HSYNC_PHASE;
175 if (pModeParam->clock_phase_polarity)
176 tmp |= DISPLAY_CTRL_CLOCK_PHASE;
178 reserved = PANEL_DISPLAY_CTRL_RESERVED_MASK |
179 PANEL_DISPLAY_CTRL_VSYNC;
181 reg = (peek32(PANEL_DISPLAY_CTRL) & ~reserved) &
182 ~(DISPLAY_CTRL_CLOCK_PHASE | DISPLAY_CTRL_VSYNC_PHASE |
183 DISPLAY_CTRL_HSYNC_PHASE | DISPLAY_CTRL_TIMING |
187 * May a hardware bug or just my test chip (not confirmed).
188 * PANEL_DISPLAY_CTRL register seems requiring few writes
189 * before a value can be successfully written in.
190 * Added some masks to mask out the reserved bits.
191 * Note: This problem happens by design. The hardware will wait
192 * for the next vertical sync to turn on/off the plane.
194 poke32(PANEL_DISPLAY_CTRL, tmp | reg);
196 while ((peek32(PANEL_DISPLAY_CTRL) & ~reserved) !=
201 poke32(PANEL_DISPLAY_CTRL, tmp | reg);
209 int ddk750_setModeTiming(struct mode_parameter *parm, clock_type_t clock)
211 struct pll_value pll;
212 unsigned int uiActualPixelClk;
214 pll.inputFreq = DEFAULT_INPUT_CLOCK;
215 pll.clockType = clock;
217 uiActualPixelClk = sm750_calc_pll_value(parm->pixel_clock, &pll);
218 if (sm750_get_chip_type() == SM750LE) {
219 /* set graphic mode via IO method */
223 programModeRegisters(parm, &pll);