1 * NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
5 - compatible: Should be one of the following:
6 - "nxp,sc16is740" for NXP SC16IS740,
7 - "nxp,sc16is741" for NXP SC16IS741,
8 - "nxp,sc16is750" for NXP SC16IS750,
9 - "nxp,sc16is752" for NXP SC16IS752,
10 - "nxp,sc16is760" for NXP SC16IS760,
11 - "nxp,sc16is762" for NXP SC16IS762.
12 - reg: I2C address of the SC16IS7xx device.
13 - interrupts: Should contain the UART interrupt
14 - clocks: Reference to the IC source clock.
17 - gpio-controller: Marks the device node as a GPIO controller.
18 - #gpio-cells: Should be two. The first cell is the GPIO number and
19 the second cell is used to specify the GPIO polarity:
24 sc16is750: sc16is750@51 {
25 compatible = "nxp,sc16is750";
28 interrupt-parent = <&gpio3>;
29 interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
37 - compatible: Should be one of the following:
38 - "nxp,sc16is740" for NXP SC16IS740,
39 - "nxp,sc16is741" for NXP SC16IS741,
40 - "nxp,sc16is750" for NXP SC16IS750,
41 - "nxp,sc16is752" for NXP SC16IS752,
42 - "nxp,sc16is760" for NXP SC16IS760,
43 - "nxp,sc16is762" for NXP SC16IS762.
44 - reg: SPI chip select number.
45 - interrupts: Specifies the interrupt source of the parent interrupt
46 controller. The format of the interrupt specifier depends on the
47 parent interrupt controller.
48 - clocks: phandle to the IC source clock.
51 - gpio-controller: Marks the device node as a GPIO controller.
52 - #gpio-cells: Should be two. The first cell is the GPIO number and
53 the second cell is used to specify the GPIO polarity:
58 sc16is750: sc16is750@0 {
59 compatible = "nxp,sc16is750";
62 interrupt-parent = <&gpio3>;
63 interrupts = <7 IRQ_TYPE_EDGE_FALLING>;