samsung,spi.yaml

   1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/spi/samsung,spi.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Samsung S3C/S5P/Exynos SoC SPI controller
   8
   9 maintainers:
  10   - Krzysztof Kozlowski <krzk@kernel.org>
  11
  12 description:
  13   All the SPI controller nodes should be represented in the aliases node using
  14   the following format 'spi{n}' where n is a unique number for the alias.
  15
  16 properties:
  17   compatible:
  18     oneOf:
  19       - enum:
  20           - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
  21           - samsung,s3c6410-spi
  22           - samsung,s5pv210-spi # for S5PV210 and S5PC110
  23           - samsung,exynos4210-spi
  24           - samsung,exynos5433-spi
  25           - samsung,exynosautov9-spi
  26           - tesla,fsd-spi
  27       - const: samsung,exynos7-spi
  28         deprecated: true
  29
  30   clocks:
  31     minItems: 2
  32     maxItems: 3
  33
  34   clock-names:
  35     minItems: 2
  36     maxItems: 3
  37
  38   dmas:
  39     minItems: 2
  40     maxItems: 2
  41
  42   dma-names:
  43     items:
  44       - const: tx
  45       - const: rx
  46
  47   interrupts:
  48     maxItems: 1
  49
  50   no-cs-readback:
  51     description:
  52       The CS line is disconnected, therefore the device should not operate
  53       based on CS signalling.
  54     type: boolean
  55
  56   num-cs:
  57     minimum: 1
  58     maximum: 4
  59     default: 1
  60
  61   samsung,spi-src-clk:
  62     description:
  63       If the spi controller includes a internal clock mux to select the clock
  64       source for the spi bus clock, this property can be used to indicate the
  65       clock to be used for driving the spi bus clock. If not specified, the
  66       clock number 0 is used as default.
  67     $ref: /schemas/types.yaml#/definitions/uint32
  68     default: 0
  69
  70   reg:
  71     maxItems: 1
  72
  73 required:
  74   - compatible
  75   - clocks
  76   - clock-names
  77   - dmas
  78   - dma-names
  79   - interrupts
  80   - reg
  81
  82 allOf:
  83   - $ref: spi-controller.yaml#
  84   - if:
  85       properties:
  86         compatible:
  87           contains:
  88             enum:
  89               - samsung,exynos5433-spi
  90               - samsung,exynosautov9-spi
  91     then:
  92       properties:
  93         clocks:
  94           minItems: 3
  95           maxItems: 3
  96         clock-names:
  97           items:
  98             - const: spi
  99             - enum:
 100                 - spi_busclk0
 101                 - spi_busclk1
 102                 - spi_busclk2
 103                 - spi_busclk3
 104             - const: spi_ioclk
 105     else:
 106       properties:
 107         clocks:
 108           minItems: 2
 109           maxItems: 2
 110         clock-names:
 111           items:
 112             - const: spi
 113             - enum:
 114                 - spi_busclk0
 115                 - spi_busclk1
 116                 - spi_busclk2
 117                 - spi_busclk3
 118
 119 unevaluatedProperties: false
 120
 121 examples:
 122   - |
 123     #include <dt-bindings/clock/exynos5433.h>
 124     #include <dt-bindings/clock/samsung,s2mps11.h>
 125     #include <dt-bindings/interrupt-controller/arm-gic.h>
 126     #include <dt-bindings/gpio/gpio.h>
 127
 128     spi@14d30000 {
 129         compatible = "samsung,exynos5433-spi";
 130         reg = <0x14d30000 0x100>;
 131         interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
 132         dmas = <&pdma0 11>, <&pdma0 10>;
 133         dma-names = "tx", "rx";
 134         #address-cells = <1>;
 135         #size-cells = <0>;
 136         clocks = <&cmu_peric CLK_PCLK_SPI1>,
 137                  <&cmu_peric CLK_SCLK_SPI1>,
 138                  <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
 139         clock-names = "spi",
 140                       "spi_busclk0",
 141                       "spi_ioclk";
 142         samsung,spi-src-clk = <0>;
 143         pinctrl-names = "default";
 144         pinctrl-0 = <&spi1_bus>;
 145         num-cs = <1>;
 146
 147         cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
 148
 149         audio-codec@0 {
 150             compatible = "wlf,wm5110";
 151             reg = <0x0>;
 152             spi-max-frequency = <20000000>;
 153             interrupt-parent = <&gpa0>;
 154             interrupts = <4 IRQ_TYPE_NONE>;
 155             clocks = <&pmu_system_controller 0>,
 156                      <&s2mps13_osc S2MPS11_CLK_BT>;
 157             clock-names = "mclk1", "mclk2";
 158
 159             gpio-controller;
 160             #gpio-cells = <2>;
 161             interrupt-controller;
 162             #interrupt-cells = <2>;
 163
 164             wlf,micd-detect-debounce = <300>;
 165             wlf,micd-bias-start-time = <0x1>;
 166             wlf,micd-rate = <0x7>;
 167             wlf,micd-dbtime = <0x2>;
 168             wlf,micd-force-micbias;
 169             wlf,micd-configs = <0x0 1 0>;
 170             wlf,hpdet-channel = <1>;
 171             wlf,gpsw = <0x1>;
 172             wlf,inmode = <2 0 2 0>;
 173
 174             wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
 175             wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
 176
 177             /* core supplies */
 178             AVDD-supply = <&ldo18_reg>;
 179             DBVDD1-supply = <&ldo18_reg>;
 180             CPVDD-supply = <&ldo18_reg>;
 181             DBVDD2-supply = <&ldo18_reg>;
 182             DBVDD3-supply = <&ldo18_reg>;
 183             SPKVDDL-supply = <&ldo18_reg>;
 184             SPKVDDR-supply = <&ldo18_reg>;
 185
 186             controller-data {
 187                 samsung,spi-feedback-delay = <0>;
 188             };
 189         };
 190     };