Mention branches and keyring.
[releases.git] / powerpc / mm / mem.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  PowerPC version
4  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
5  *
6  *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
7  *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
8  *    Copyright (C) 1996 Paul Mackerras
9  *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
10  *
11  *  Derived from "arch/i386/mm/init.c"
12  *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
13  */
14
15 #include <linux/memblock.h>
16 #include <linux/highmem.h>
17 #include <linux/suspend.h>
18 #include <linux/dma-direct.h>
19
20 #include <asm/swiotlb.h>
21 #include <asm/machdep.h>
22 #include <asm/rtas.h>
23 #include <asm/kasan.h>
24 #include <asm/svm.h>
25 #include <asm/mmzone.h>
26 #include <asm/ftrace.h>
27 #include <asm/code-patching.h>
28 #include <asm/setup.h>
29
30 #include <mm/mmu_decl.h>
31
32 unsigned long long memory_limit;
33
34 unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)] __page_aligned_bss;
35 EXPORT_SYMBOL(empty_zero_page);
36
37 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
38                               unsigned long size, pgprot_t vma_prot)
39 {
40         if (ppc_md.phys_mem_access_prot)
41                 return ppc_md.phys_mem_access_prot(file, pfn, size, vma_prot);
42
43         if (!page_is_ram(pfn))
44                 vma_prot = pgprot_noncached(vma_prot);
45
46         return vma_prot;
47 }
48 EXPORT_SYMBOL(phys_mem_access_prot);
49
50 #ifdef CONFIG_MEMORY_HOTPLUG
51 static DEFINE_MUTEX(linear_mapping_mutex);
52
53 #ifdef CONFIG_NUMA
54 int memory_add_physaddr_to_nid(u64 start)
55 {
56         return hot_add_scn_to_nid(start);
57 }
58 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
59 #endif
60
61 int __weak create_section_mapping(unsigned long start, unsigned long end,
62                                   int nid, pgprot_t prot)
63 {
64         return -ENODEV;
65 }
66
67 int __weak remove_section_mapping(unsigned long start, unsigned long end)
68 {
69         return -ENODEV;
70 }
71
72 int __ref arch_create_linear_mapping(int nid, u64 start, u64 size,
73                                      struct mhp_params *params)
74 {
75         int rc;
76
77         start = (unsigned long)__va(start);
78         mutex_lock(&linear_mapping_mutex);
79         rc = create_section_mapping(start, start + size, nid,
80                                     params->pgprot);
81         mutex_unlock(&linear_mapping_mutex);
82         if (rc) {
83                 pr_warn("Unable to create linear mapping for 0x%llx..0x%llx: %d\n",
84                         start, start + size, rc);
85                 return -EFAULT;
86         }
87         return 0;
88 }
89
90 void __ref arch_remove_linear_mapping(u64 start, u64 size)
91 {
92         int ret;
93
94         /* Remove htab bolted mappings for this section of memory */
95         start = (unsigned long)__va(start);
96
97         mutex_lock(&linear_mapping_mutex);
98         ret = remove_section_mapping(start, start + size);
99         mutex_unlock(&linear_mapping_mutex);
100         if (ret)
101                 pr_warn("Unable to remove linear mapping for 0x%llx..0x%llx: %d\n",
102                         start, start + size, ret);
103
104         /* Ensure all vmalloc mappings are flushed in case they also
105          * hit that section of memory
106          */
107         vm_unmap_aliases();
108 }
109
110 /*
111  * After memory hotplug the variables max_pfn, max_low_pfn and high_memory need
112  * updating.
113  */
114 static void update_end_of_memory_vars(u64 start, u64 size)
115 {
116         unsigned long end_pfn = PFN_UP(start + size);
117
118         if (end_pfn > max_pfn) {
119                 max_pfn = end_pfn;
120                 max_low_pfn = end_pfn;
121                 high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
122         }
123 }
124
125 int __ref add_pages(int nid, unsigned long start_pfn, unsigned long nr_pages,
126                     struct mhp_params *params)
127 {
128         int ret;
129
130         ret = __add_pages(nid, start_pfn, nr_pages, params);
131         if (ret)
132                 return ret;
133
134         /* update max_pfn, max_low_pfn and high_memory */
135         update_end_of_memory_vars(start_pfn << PAGE_SHIFT,
136                                   nr_pages << PAGE_SHIFT);
137
138         return ret;
139 }
140
141 int __ref arch_add_memory(int nid, u64 start, u64 size,
142                           struct mhp_params *params)
143 {
144         unsigned long start_pfn = start >> PAGE_SHIFT;
145         unsigned long nr_pages = size >> PAGE_SHIFT;
146         int rc;
147
148         rc = arch_create_linear_mapping(nid, start, size, params);
149         if (rc)
150                 return rc;
151         rc = add_pages(nid, start_pfn, nr_pages, params);
152         if (rc)
153                 arch_remove_linear_mapping(start, size);
154         return rc;
155 }
156
157 void __ref arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
158 {
159         unsigned long start_pfn = start >> PAGE_SHIFT;
160         unsigned long nr_pages = size >> PAGE_SHIFT;
161
162         __remove_pages(start_pfn, nr_pages, altmap);
163         arch_remove_linear_mapping(start, size);
164 }
165 #endif
166
167 #ifndef CONFIG_NUMA
168 void __init mem_topology_setup(void)
169 {
170         max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
171         min_low_pfn = MEMORY_START >> PAGE_SHIFT;
172 #ifdef CONFIG_HIGHMEM
173         max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
174 #endif
175
176         /* Place all memblock_regions in the same node and merge contiguous
177          * memblock_regions
178          */
179         memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0);
180 }
181
182 void __init initmem_init(void)
183 {
184         sparse_init();
185 }
186
187 /* mark pages that don't exist as nosave */
188 static int __init mark_nonram_nosave(void)
189 {
190         unsigned long spfn, epfn, prev = 0;
191         int i;
192
193         for_each_mem_pfn_range(i, MAX_NUMNODES, &spfn, &epfn, NULL) {
194                 if (prev && prev < spfn)
195                         register_nosave_region(prev, spfn);
196
197                 prev = epfn;
198         }
199
200         return 0;
201 }
202 #else /* CONFIG_NUMA */
203 static int __init mark_nonram_nosave(void)
204 {
205         return 0;
206 }
207 #endif
208
209 /*
210  * Zones usage:
211  *
212  * We setup ZONE_DMA to be 31-bits on all platforms and ZONE_NORMAL to be
213  * everything else. GFP_DMA32 page allocations automatically fall back to
214  * ZONE_DMA.
215  *
216  * By using 31-bit unconditionally, we can exploit zone_dma_bits to inform the
217  * generic DMA mapping code.  32-bit only devices (if not handled by an IOMMU
218  * anyway) will take a first dip into ZONE_NORMAL and get otherwise served by
219  * ZONE_DMA.
220  */
221 static unsigned long max_zone_pfns[MAX_NR_ZONES];
222
223 /*
224  * paging_init() sets up the page tables - in fact we've already done this.
225  */
226 void __init paging_init(void)
227 {
228         unsigned long long total_ram = memblock_phys_mem_size();
229         phys_addr_t top_of_ram = memblock_end_of_DRAM();
230
231 #ifdef CONFIG_HIGHMEM
232         unsigned long v = __fix_to_virt(FIX_KMAP_END);
233         unsigned long end = __fix_to_virt(FIX_KMAP_BEGIN);
234
235         for (; v < end; v += PAGE_SIZE)
236                 map_kernel_page(v, 0, __pgprot(0)); /* XXX gross */
237
238         map_kernel_page(PKMAP_BASE, 0, __pgprot(0));    /* XXX gross */
239         pkmap_page_table = virt_to_kpte(PKMAP_BASE);
240 #endif /* CONFIG_HIGHMEM */
241
242         printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%llx\n",
243                (unsigned long long)top_of_ram, total_ram);
244         printk(KERN_DEBUG "Memory hole size: %ldMB\n",
245                (long int)((top_of_ram - total_ram) >> 20));
246
247         /*
248          * Allow 30-bit DMA for very limited Broadcom wifi chips on many
249          * powerbooks.
250          */
251         if (IS_ENABLED(CONFIG_PPC32))
252                 zone_dma_bits = 30;
253         else
254                 zone_dma_bits = 31;
255
256 #ifdef CONFIG_ZONE_DMA
257         max_zone_pfns[ZONE_DMA] = min(max_low_pfn,
258                                       1UL << (zone_dma_bits - PAGE_SHIFT));
259 #endif
260         max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
261 #ifdef CONFIG_HIGHMEM
262         max_zone_pfns[ZONE_HIGHMEM] = max_pfn;
263 #endif
264
265         free_area_init(max_zone_pfns);
266
267         mark_nonram_nosave();
268 }
269
270 void __init mem_init(void)
271 {
272         /*
273          * book3s is limited to 16 page sizes due to encoding this in
274          * a 4-bit field for slices.
275          */
276         BUILD_BUG_ON(MMU_PAGE_COUNT > 16);
277
278 #ifdef CONFIG_SWIOTLB
279         /*
280          * Some platforms (e.g. 85xx) limit DMA-able memory way below
281          * 4G. We force memblock to bottom-up mode to ensure that the
282          * memory allocated in swiotlb_init() is DMA-able.
283          * As it's the last memblock allocation, no need to reset it
284          * back to to-down.
285          */
286         memblock_set_bottom_up(true);
287         swiotlb_init(ppc_swiotlb_enable, ppc_swiotlb_flags);
288 #endif
289
290         high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
291
292         kasan_late_init();
293
294         memblock_free_all();
295
296 #ifdef CONFIG_HIGHMEM
297         {
298                 unsigned long pfn, highmem_mapnr;
299
300                 highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
301                 for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
302                         phys_addr_t paddr = (phys_addr_t)pfn << PAGE_SHIFT;
303                         struct page *page = pfn_to_page(pfn);
304                         if (memblock_is_memory(paddr) && !memblock_is_reserved(paddr))
305                                 free_highmem_page(page);
306                 }
307         }
308 #endif /* CONFIG_HIGHMEM */
309
310 #if defined(CONFIG_PPC_E500) && !defined(CONFIG_SMP)
311         /*
312          * If smp is enabled, next_tlbcam_idx is initialized in the cpu up
313          * functions.... do it here for the non-smp case.
314          */
315         per_cpu(next_tlbcam_idx, smp_processor_id()) =
316                 (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) - 1;
317 #endif
318
319 #ifdef CONFIG_PPC32
320         pr_info("Kernel virtual memory layout:\n");
321 #ifdef CONFIG_KASAN
322         pr_info("  * 0x%08lx..0x%08lx  : kasan shadow mem\n",
323                 KASAN_SHADOW_START, KASAN_SHADOW_END);
324 #endif
325         pr_info("  * 0x%08lx..0x%08lx  : fixmap\n", FIXADDR_START, FIXADDR_TOP);
326 #ifdef CONFIG_HIGHMEM
327         pr_info("  * 0x%08lx..0x%08lx  : highmem PTEs\n",
328                 PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
329 #endif /* CONFIG_HIGHMEM */
330         if (ioremap_bot != IOREMAP_TOP)
331                 pr_info("  * 0x%08lx..0x%08lx  : early ioremap\n",
332                         ioremap_bot, IOREMAP_TOP);
333         pr_info("  * 0x%08lx..0x%08lx  : vmalloc & ioremap\n",
334                 VMALLOC_START, VMALLOC_END);
335 #ifdef MODULES_VADDR
336         pr_info("  * 0x%08lx..0x%08lx  : modules\n",
337                 MODULES_VADDR, MODULES_END);
338 #endif
339 #endif /* CONFIG_PPC32 */
340 }
341
342 void free_initmem(void)
343 {
344         ppc_md.progress = ppc_printk_progress;
345         mark_initmem_nx();
346         static_branch_enable(&init_mem_is_free);
347         free_initmem_default(POISON_FREE_INITMEM);
348         ftrace_free_init_tramp();
349 }
350
351 /*
352  * System memory should not be in /proc/iomem but various tools expect it
353  * (eg kdump).
354  */
355 static int __init add_system_ram_resources(void)
356 {
357         phys_addr_t start, end;
358         u64 i;
359
360         for_each_mem_range(i, &start, &end) {
361                 struct resource *res;
362
363                 res = kzalloc(sizeof(struct resource), GFP_KERNEL);
364                 WARN_ON(!res);
365
366                 if (res) {
367                         res->name = "System RAM";
368                         res->start = start;
369                         /*
370                          * In memblock, end points to the first byte after
371                          * the range while in resourses, end points to the
372                          * last byte in the range.
373                          */
374                         res->end = end - 1;
375                         res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
376                         WARN_ON(request_resource(&iomem_resource, res) < 0);
377                 }
378         }
379
380         return 0;
381 }
382 subsys_initcall(add_system_ram_resources);
383
384 #ifdef CONFIG_STRICT_DEVMEM
385 /*
386  * devmem_is_allowed(): check to see if /dev/mem access to a certain address
387  * is valid. The argument is a physical page number.
388  *
389  * Access has to be given to non-kernel-ram areas as well, these contain the
390  * PCI mmio resources as well as potential bios/acpi data regions.
391  */
392 int devmem_is_allowed(unsigned long pfn)
393 {
394         if (page_is_rtas_user_buf(pfn))
395                 return 1;
396         if (iomem_is_exclusive(PFN_PHYS(pfn)))
397                 return 0;
398         if (!page_is_ram(pfn))
399                 return 1;
400         return 0;
401 }
402 #endif /* CONFIG_STRICT_DEVMEM */
403
404 /*
405  * This is defined in kernel/resource.c but only powerpc needs to export it, for
406  * the EHEA driver. Drop this when drivers/net/ethernet/ibm/ehea is removed.
407  */
408 EXPORT_SYMBOL_GPL(walk_system_ram_range);