1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Based on MPC8560 ADS and arch/ppc tqm85xx ports
5 * Maintained by Kumar Gala (see MAINTAINERS for contact information)
7 * Copyright 2008 Freescale Semiconductor Inc.
9 * Copyright (c) 2005-2006 DENX Software Engineering
10 * Stefan Roese <sr@denx.de>
12 * Based on original work by
13 * Kumar Gala <kumar.gala@freescale.com>
14 * Copyright 2004 Freescale Semiconductor Inc.
17 #include <linux/stddef.h>
18 #include <linux/kernel.h>
19 #include <linux/pci.h>
20 #include <linux/kdev_t.h>
21 #include <linux/delay.h>
22 #include <linux/seq_file.h>
23 #include <linux/of_platform.h>
26 #include <asm/machdep.h>
27 #include <asm/pci-bridge.h>
29 #include <mm/mmu_decl.h>
32 #include <sysdev/fsl_soc.h>
33 #include <sysdev/fsl_pci.h>
39 #endif /* CONFIG_CPM2 */
41 static void __init tqm85xx_pic_init(void)
43 struct mpic *mpic = mpic_alloc(NULL, 0,
49 mpc85xx_cpm2_pic_init();
53 * Setup the architecture
55 static void __init tqm85xx_setup_arch(void)
58 ppc_md.progress("tqm85xx_setup_arch()", 0);
64 fsl_pci_assign_primary();
67 static void tqm85xx_show_cpuinfo(struct seq_file *m)
69 uint pvid, svid, phid1;
71 pvid = mfspr(SPRN_PVR);
72 svid = mfspr(SPRN_SVR);
74 seq_printf(m, "Vendor\t\t: TQ Components\n");
75 seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
76 seq_printf(m, "SVR\t\t: 0x%x\n", svid);
78 /* Display cpu Pll setting */
79 phid1 = mfspr(SPRN_HID1);
80 seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
83 static void tqm85xx_ti1520_fixup(struct pci_dev *pdev)
87 /* Do not do the fixup on other platforms! */
88 if (!machine_is(tqm85xx))
91 dev_info(&pdev->dev, "Using TI 1520 fixup on TQM85xx\n");
94 * Enable P2CCLK bit in system control register
95 * to enable CLOCK output to power chip
97 pci_read_config_dword(pdev, 0x80, &val);
98 pci_write_config_dword(pdev, 0x80, val | (1 << 27));
101 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
102 tqm85xx_ti1520_fixup);
104 machine_arch_initcall(tqm85xx, mpc85xx_common_publish_devices);
106 static const char * const board[] __initconst = {
116 * Called very early, device-tree isn't unflattened
118 static int __init tqm85xx_probe(void)
120 return of_device_compatible_match(of_root, board);
123 define_machine(tqm85xx) {
125 .probe = tqm85xx_probe,
126 .setup_arch = tqm85xx_setup_arch,
127 .init_IRQ = tqm85xx_pic_init,
128 .show_cpuinfo = tqm85xx_show_cpuinfo,
129 .get_irq = mpic_get_irq,
130 .progress = udbg_progress,