GNU Linux-libre 4.19.245-gnu1
[releases.git] / net / mac80211 / main.c
1 /*
2  * Copyright 2002-2005, Instant802 Networks, Inc.
3  * Copyright 2005-2006, Devicescape Software, Inc.
4  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
5  * Copyright 2013-2014  Intel Mobile Communications GmbH
6  * Copyright (C) 2017     Intel Deutschland GmbH
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12
13 #include <net/mac80211.h>
14 #include <linux/module.h>
15 #include <linux/init.h>
16 #include <linux/netdevice.h>
17 #include <linux/types.h>
18 #include <linux/slab.h>
19 #include <linux/skbuff.h>
20 #include <linux/etherdevice.h>
21 #include <linux/if_arp.h>
22 #include <linux/rtnetlink.h>
23 #include <linux/bitmap.h>
24 #include <linux/inetdevice.h>
25 #include <net/net_namespace.h>
26 #include <net/cfg80211.h>
27 #include <net/addrconf.h>
28
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
31 #include "rate.h"
32 #include "mesh.h"
33 #include "wep.h"
34 #include "led.h"
35 #include "debugfs.h"
36
37 void ieee80211_configure_filter(struct ieee80211_local *local)
38 {
39         u64 mc;
40         unsigned int changed_flags;
41         unsigned int new_flags = 0;
42
43         if (atomic_read(&local->iff_allmultis))
44                 new_flags |= FIF_ALLMULTI;
45
46         if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) ||
47             test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning))
48                 new_flags |= FIF_BCN_PRBRESP_PROMISC;
49
50         if (local->fif_probe_req || local->probe_req_reg)
51                 new_flags |= FIF_PROBE_REQ;
52
53         if (local->fif_fcsfail)
54                 new_flags |= FIF_FCSFAIL;
55
56         if (local->fif_plcpfail)
57                 new_flags |= FIF_PLCPFAIL;
58
59         if (local->fif_control)
60                 new_flags |= FIF_CONTROL;
61
62         if (local->fif_other_bss)
63                 new_flags |= FIF_OTHER_BSS;
64
65         if (local->fif_pspoll)
66                 new_flags |= FIF_PSPOLL;
67
68         spin_lock_bh(&local->filter_lock);
69         changed_flags = local->filter_flags ^ new_flags;
70
71         mc = drv_prepare_multicast(local, &local->mc_list);
72         spin_unlock_bh(&local->filter_lock);
73
74         /* be a bit nasty */
75         new_flags |= (1<<31);
76
77         drv_configure_filter(local, changed_flags, &new_flags, mc);
78
79         WARN_ON(new_flags & (1<<31));
80
81         local->filter_flags = new_flags & ~(1<<31);
82 }
83
84 static void ieee80211_reconfig_filter(struct work_struct *work)
85 {
86         struct ieee80211_local *local =
87                 container_of(work, struct ieee80211_local, reconfig_filter);
88
89         ieee80211_configure_filter(local);
90 }
91
92 static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
93 {
94         struct ieee80211_sub_if_data *sdata;
95         struct cfg80211_chan_def chandef = {};
96         u32 changed = 0;
97         int power;
98         u32 offchannel_flag;
99
100         offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
101
102         if (local->scan_chandef.chan) {
103                 chandef = local->scan_chandef;
104         } else if (local->tmp_channel) {
105                 chandef.chan = local->tmp_channel;
106                 chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
107                 chandef.center_freq1 = chandef.chan->center_freq;
108         } else
109                 chandef = local->_oper_chandef;
110
111         WARN(!cfg80211_chandef_valid(&chandef),
112              "control:%d MHz width:%d center: %d/%d MHz",
113              chandef.chan->center_freq, chandef.width,
114              chandef.center_freq1, chandef.center_freq2);
115
116         if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
117                 local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
118         else
119                 local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
120
121         offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
122
123         if (offchannel_flag ||
124             !cfg80211_chandef_identical(&local->hw.conf.chandef,
125                                         &local->_oper_chandef)) {
126                 local->hw.conf.chandef = chandef;
127                 changed |= IEEE80211_CONF_CHANGE_CHANNEL;
128         }
129
130         if (!conf_is_ht(&local->hw.conf)) {
131                 /*
132                  * mac80211.h documents that this is only valid
133                  * when the channel is set to an HT type, and
134                  * that otherwise STATIC is used.
135                  */
136                 local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
137         } else if (local->hw.conf.smps_mode != local->smps_mode) {
138                 local->hw.conf.smps_mode = local->smps_mode;
139                 changed |= IEEE80211_CONF_CHANGE_SMPS;
140         }
141
142         power = ieee80211_chandef_max_power(&chandef);
143
144         rcu_read_lock();
145         list_for_each_entry_rcu(sdata, &local->interfaces, list) {
146                 if (!rcu_access_pointer(sdata->vif.chanctx_conf))
147                         continue;
148                 if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
149                         continue;
150                 power = min(power, sdata->vif.bss_conf.txpower);
151         }
152         rcu_read_unlock();
153
154         if (local->hw.conf.power_level != power) {
155                 changed |= IEEE80211_CONF_CHANGE_POWER;
156                 local->hw.conf.power_level = power;
157         }
158
159         return changed;
160 }
161
162 int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
163 {
164         int ret = 0;
165
166         might_sleep();
167
168         if (!local->use_chanctx)
169                 changed |= ieee80211_hw_conf_chan(local);
170         else
171                 changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL |
172                              IEEE80211_CONF_CHANGE_POWER);
173
174         if (changed && local->open_count) {
175                 ret = drv_config(local, changed);
176                 /*
177                  * Goal:
178                  * HW reconfiguration should never fail, the driver has told
179                  * us what it can support so it should live up to that promise.
180                  *
181                  * Current status:
182                  * rfkill is not integrated with mac80211 and a
183                  * configuration command can thus fail if hardware rfkill
184                  * is enabled
185                  *
186                  * FIXME: integrate rfkill with mac80211 and then add this
187                  * WARN_ON() back
188                  *
189                  */
190                 /* WARN_ON(ret); */
191         }
192
193         return ret;
194 }
195
196 void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
197                                       u32 changed)
198 {
199         struct ieee80211_local *local = sdata->local;
200
201         if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
202                 return;
203
204         drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed);
205 }
206
207 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
208 {
209         sdata->vif.bss_conf.use_cts_prot = false;
210         sdata->vif.bss_conf.use_short_preamble = false;
211         sdata->vif.bss_conf.use_short_slot = false;
212         return BSS_CHANGED_ERP_CTS_PROT |
213                BSS_CHANGED_ERP_PREAMBLE |
214                BSS_CHANGED_ERP_SLOT;
215 }
216
217 static void ieee80211_tasklet_handler(unsigned long data)
218 {
219         struct ieee80211_local *local = (struct ieee80211_local *) data;
220         struct sk_buff *skb;
221
222         while ((skb = skb_dequeue(&local->skb_queue)) ||
223                (skb = skb_dequeue(&local->skb_queue_unreliable))) {
224                 switch (skb->pkt_type) {
225                 case IEEE80211_RX_MSG:
226                         /* Clear skb->pkt_type in order to not confuse kernel
227                          * netstack. */
228                         skb->pkt_type = 0;
229                         ieee80211_rx(&local->hw, skb);
230                         break;
231                 case IEEE80211_TX_STATUS_MSG:
232                         skb->pkt_type = 0;
233                         ieee80211_tx_status(&local->hw, skb);
234                         break;
235                 default:
236                         WARN(1, "mac80211: Packet is of unknown type %d\n",
237                              skb->pkt_type);
238                         dev_kfree_skb(skb);
239                         break;
240                 }
241         }
242 }
243
244 static void ieee80211_restart_work(struct work_struct *work)
245 {
246         struct ieee80211_local *local =
247                 container_of(work, struct ieee80211_local, restart_work);
248         struct ieee80211_sub_if_data *sdata;
249
250         /* wait for scan work complete */
251         flush_workqueue(local->workqueue);
252         flush_work(&local->sched_scan_stopped_work);
253
254         WARN(test_bit(SCAN_HW_SCANNING, &local->scanning),
255              "%s called with hardware scan in progress\n", __func__);
256
257         flush_work(&local->radar_detected_work);
258         rtnl_lock();
259         list_for_each_entry(sdata, &local->interfaces, list) {
260                 /*
261                  * XXX: there may be more work for other vif types and even
262                  * for station mode: a good thing would be to run most of
263                  * the iface type's dependent _stop (ieee80211_mg_stop,
264                  * ieee80211_ibss_stop) etc...
265                  * For now, fix only the specific bug that was seen: race
266                  * between csa_connection_drop_work and us.
267                  */
268                 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
269                         /*
270                          * This worker is scheduled from the iface worker that
271                          * runs on mac80211's workqueue, so we can't be
272                          * scheduling this worker after the cancel right here.
273                          * The exception is ieee80211_chswitch_done.
274                          * Then we can have a race...
275                          */
276                         cancel_work_sync(&sdata->u.mgd.csa_connection_drop_work);
277                 }
278                 flush_delayed_work(&sdata->dec_tailroom_needed_wk);
279         }
280         ieee80211_scan_cancel(local);
281
282         /* make sure any new ROC will consider local->in_reconfig */
283         flush_delayed_work(&local->roc_work);
284         flush_work(&local->hw_roc_done);
285
286         /* wait for all packet processing to be done */
287         synchronize_net();
288
289         ieee80211_reconfig(local);
290         rtnl_unlock();
291 }
292
293 void ieee80211_restart_hw(struct ieee80211_hw *hw)
294 {
295         struct ieee80211_local *local = hw_to_local(hw);
296
297         trace_api_restart_hw(local);
298
299         wiphy_info(hw->wiphy,
300                    "Hardware restart was requested\n");
301
302         /* use this reason, ieee80211_reconfig will unblock it */
303         ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
304                                         IEEE80211_QUEUE_STOP_REASON_SUSPEND,
305                                         false);
306
307         /*
308          * Stop all Rx during the reconfig. We don't want state changes
309          * or driver callbacks while this is in progress.
310          */
311         local->in_reconfig = true;
312         barrier();
313
314         queue_work(system_freezable_wq, &local->restart_work);
315 }
316 EXPORT_SYMBOL(ieee80211_restart_hw);
317
318 #ifdef CONFIG_INET
319 static int ieee80211_ifa_changed(struct notifier_block *nb,
320                                  unsigned long data, void *arg)
321 {
322         struct in_ifaddr *ifa = arg;
323         struct ieee80211_local *local =
324                 container_of(nb, struct ieee80211_local,
325                              ifa_notifier);
326         struct net_device *ndev = ifa->ifa_dev->dev;
327         struct wireless_dev *wdev = ndev->ieee80211_ptr;
328         struct in_device *idev;
329         struct ieee80211_sub_if_data *sdata;
330         struct ieee80211_bss_conf *bss_conf;
331         struct ieee80211_if_managed *ifmgd;
332         int c = 0;
333
334         /* Make sure it's our interface that got changed */
335         if (!wdev)
336                 return NOTIFY_DONE;
337
338         if (wdev->wiphy != local->hw.wiphy)
339                 return NOTIFY_DONE;
340
341         sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
342         bss_conf = &sdata->vif.bss_conf;
343
344         /* ARP filtering is only supported in managed mode */
345         if (sdata->vif.type != NL80211_IFTYPE_STATION)
346                 return NOTIFY_DONE;
347
348         idev = __in_dev_get_rtnl(sdata->dev);
349         if (!idev)
350                 return NOTIFY_DONE;
351
352         ifmgd = &sdata->u.mgd;
353         sdata_lock(sdata);
354
355         /* Copy the addresses to the bss_conf list */
356         ifa = idev->ifa_list;
357         while (ifa) {
358                 if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN)
359                         bss_conf->arp_addr_list[c] = ifa->ifa_address;
360                 ifa = ifa->ifa_next;
361                 c++;
362         }
363
364         bss_conf->arp_addr_cnt = c;
365
366         /* Configure driver only if associated (which also implies it is up) */
367         if (ifmgd->associated)
368                 ieee80211_bss_info_change_notify(sdata,
369                                                  BSS_CHANGED_ARP_FILTER);
370
371         sdata_unlock(sdata);
372
373         return NOTIFY_OK;
374 }
375 #endif
376
377 #if IS_ENABLED(CONFIG_IPV6)
378 static int ieee80211_ifa6_changed(struct notifier_block *nb,
379                                   unsigned long data, void *arg)
380 {
381         struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg;
382         struct inet6_dev *idev = ifa->idev;
383         struct net_device *ndev = ifa->idev->dev;
384         struct ieee80211_local *local =
385                 container_of(nb, struct ieee80211_local, ifa6_notifier);
386         struct wireless_dev *wdev = ndev->ieee80211_ptr;
387         struct ieee80211_sub_if_data *sdata;
388
389         /* Make sure it's our interface that got changed */
390         if (!wdev || wdev->wiphy != local->hw.wiphy)
391                 return NOTIFY_DONE;
392
393         sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
394
395         /*
396          * For now only support station mode. This is mostly because
397          * doing AP would have to handle AP_VLAN in some way ...
398          */
399         if (sdata->vif.type != NL80211_IFTYPE_STATION)
400                 return NOTIFY_DONE;
401
402         drv_ipv6_addr_change(local, sdata, idev);
403
404         return NOTIFY_OK;
405 }
406 #endif
407
408 /* There isn't a lot of sense in it, but you can transmit anything you like */
409 static const struct ieee80211_txrx_stypes
410 ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
411         [NL80211_IFTYPE_ADHOC] = {
412                 .tx = 0xffff,
413                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
414                         BIT(IEEE80211_STYPE_AUTH >> 4) |
415                         BIT(IEEE80211_STYPE_DEAUTH >> 4) |
416                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
417         },
418         [NL80211_IFTYPE_STATION] = {
419                 .tx = 0xffff,
420                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
421                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
422         },
423         [NL80211_IFTYPE_AP] = {
424                 .tx = 0xffff,
425                 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
426                         BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
427                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
428                         BIT(IEEE80211_STYPE_DISASSOC >> 4) |
429                         BIT(IEEE80211_STYPE_AUTH >> 4) |
430                         BIT(IEEE80211_STYPE_DEAUTH >> 4) |
431                         BIT(IEEE80211_STYPE_ACTION >> 4),
432         },
433         [NL80211_IFTYPE_AP_VLAN] = {
434                 /* copy AP */
435                 .tx = 0xffff,
436                 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
437                         BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
438                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
439                         BIT(IEEE80211_STYPE_DISASSOC >> 4) |
440                         BIT(IEEE80211_STYPE_AUTH >> 4) |
441                         BIT(IEEE80211_STYPE_DEAUTH >> 4) |
442                         BIT(IEEE80211_STYPE_ACTION >> 4),
443         },
444         [NL80211_IFTYPE_P2P_CLIENT] = {
445                 .tx = 0xffff,
446                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
447                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
448         },
449         [NL80211_IFTYPE_P2P_GO] = {
450                 .tx = 0xffff,
451                 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
452                         BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
453                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
454                         BIT(IEEE80211_STYPE_DISASSOC >> 4) |
455                         BIT(IEEE80211_STYPE_AUTH >> 4) |
456                         BIT(IEEE80211_STYPE_DEAUTH >> 4) |
457                         BIT(IEEE80211_STYPE_ACTION >> 4),
458         },
459         [NL80211_IFTYPE_MESH_POINT] = {
460                 .tx = 0xffff,
461                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
462                         BIT(IEEE80211_STYPE_AUTH >> 4) |
463                         BIT(IEEE80211_STYPE_DEAUTH >> 4),
464         },
465         [NL80211_IFTYPE_P2P_DEVICE] = {
466                 .tx = 0xffff,
467                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
468                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
469         },
470 };
471
472 static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = {
473         .ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR |
474                              IEEE80211_HT_AMPDU_PARM_DENSITY,
475
476         .cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
477                                 IEEE80211_HT_CAP_MAX_AMSDU |
478                                 IEEE80211_HT_CAP_SGI_20 |
479                                 IEEE80211_HT_CAP_SGI_40 |
480                                 IEEE80211_HT_CAP_LDPC_CODING |
481                                 IEEE80211_HT_CAP_40MHZ_INTOLERANT),
482         .mcs = {
483                 .rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff,
484                              0xff, 0xff, 0xff, 0xff, 0xff, },
485         },
486 };
487
488 static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = {
489         .vht_cap_info =
490                 cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC |
491                             IEEE80211_VHT_CAP_SHORT_GI_80 |
492                             IEEE80211_VHT_CAP_SHORT_GI_160 |
493                             IEEE80211_VHT_CAP_RXSTBC_MASK |
494                             IEEE80211_VHT_CAP_TXSTBC |
495                             IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
496                             IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
497                             IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN |
498                             IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
499                             IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK),
500         .supp_mcs = {
501                 .rx_mcs_map = cpu_to_le16(~0),
502                 .tx_mcs_map = cpu_to_le16(~0),
503         },
504 };
505
506 struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
507                                            const struct ieee80211_ops *ops,
508                                            const char *requested_name)
509 {
510         struct ieee80211_local *local;
511         int priv_size, i;
512         struct wiphy *wiphy;
513         bool use_chanctx;
514
515         if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config ||
516                     !ops->add_interface || !ops->remove_interface ||
517                     !ops->configure_filter))
518                 return NULL;
519
520         if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove)))
521                 return NULL;
522
523         /* check all or no channel context operations exist */
524         i = !!ops->add_chanctx + !!ops->remove_chanctx +
525             !!ops->change_chanctx + !!ops->assign_vif_chanctx +
526             !!ops->unassign_vif_chanctx;
527         if (WARN_ON(i != 0 && i != 5))
528                 return NULL;
529         use_chanctx = i == 5;
530
531         /* Ensure 32-byte alignment of our private data and hw private data.
532          * We use the wiphy priv data for both our ieee80211_local and for
533          * the driver's private data
534          *
535          * In memory it'll be like this:
536          *
537          * +-------------------------+
538          * | struct wiphy           |
539          * +-------------------------+
540          * | struct ieee80211_local  |
541          * +-------------------------+
542          * | driver's private data   |
543          * +-------------------------+
544          *
545          */
546         priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
547
548         wiphy = wiphy_new_nm(&mac80211_config_ops, priv_size, requested_name);
549
550         if (!wiphy)
551                 return NULL;
552
553         wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes;
554
555         wiphy->privid = mac80211_wiphy_privid;
556
557         wiphy->flags |= WIPHY_FLAG_NETNS_OK |
558                         WIPHY_FLAG_4ADDR_AP |
559                         WIPHY_FLAG_4ADDR_STATION |
560                         WIPHY_FLAG_REPORTS_OBSS |
561                         WIPHY_FLAG_OFFCHAN_TX;
562
563         if (ops->remain_on_channel)
564                 wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
565
566         wiphy->features |= NL80211_FEATURE_SK_TX_STATUS |
567                            NL80211_FEATURE_SAE |
568                            NL80211_FEATURE_HT_IBSS |
569                            NL80211_FEATURE_VIF_TXPOWER |
570                            NL80211_FEATURE_MAC_ON_CREATE |
571                            NL80211_FEATURE_USERSPACE_MPM |
572                            NL80211_FEATURE_FULL_AP_CLIENT_STATE;
573         wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_FILS_STA);
574         wiphy_ext_feature_set(wiphy,
575                               NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211);
576
577         if (!ops->hw_scan) {
578                 wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
579                                    NL80211_FEATURE_AP_SCAN;
580                 /*
581                  * if the driver behaves correctly using the probe request
582                  * (template) from mac80211, then both of these should be
583                  * supported even with hw scan - but let drivers opt in.
584                  */
585                 wiphy_ext_feature_set(wiphy,
586                                       NL80211_EXT_FEATURE_SCAN_RANDOM_SN);
587                 wiphy_ext_feature_set(wiphy,
588                                       NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT);
589         }
590
591         if (!ops->set_key)
592                 wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
593
594         if (ops->wake_tx_queue)
595                 wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_TXQS);
596
597         wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_RRM);
598
599         wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
600
601         local = wiphy_priv(wiphy);
602
603         if (sta_info_init(local))
604                 goto err_free;
605
606         local->hw.wiphy = wiphy;
607
608         local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
609
610         local->ops = ops;
611         local->use_chanctx = use_chanctx;
612
613         /* set up some defaults */
614         local->hw.queues = 1;
615         local->hw.max_rates = 1;
616         local->hw.max_report_rates = 0;
617         local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF_HT;
618         local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF_HT;
619         local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE;
620         local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
621         local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
622         local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
623                                          IEEE80211_RADIOTAP_MCS_HAVE_GI |
624                                          IEEE80211_RADIOTAP_MCS_HAVE_BW;
625         local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
626                                          IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
627         local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
628         local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN;
629         local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
630         wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask;
631         wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask;
632
633         local->ext_capa[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF;
634
635         wiphy->extended_capabilities = local->ext_capa;
636         wiphy->extended_capabilities_mask = local->ext_capa;
637         wiphy->extended_capabilities_len =
638                 ARRAY_SIZE(local->ext_capa);
639
640         INIT_LIST_HEAD(&local->interfaces);
641         INIT_LIST_HEAD(&local->mon_list);
642
643         __hw_addr_init(&local->mc_list);
644
645         mutex_init(&local->iflist_mtx);
646         mutex_init(&local->mtx);
647
648         mutex_init(&local->key_mtx);
649         spin_lock_init(&local->filter_lock);
650         spin_lock_init(&local->rx_path_lock);
651         spin_lock_init(&local->queue_stop_reason_lock);
652
653         INIT_LIST_HEAD(&local->chanctx_list);
654         mutex_init(&local->chanctx_mtx);
655
656         INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
657
658         INIT_WORK(&local->restart_work, ieee80211_restart_work);
659
660         INIT_WORK(&local->radar_detected_work,
661                   ieee80211_dfs_radar_detected_work);
662
663         INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
664         local->smps_mode = IEEE80211_SMPS_OFF;
665
666         INIT_WORK(&local->dynamic_ps_enable_work,
667                   ieee80211_dynamic_ps_enable_work);
668         INIT_WORK(&local->dynamic_ps_disable_work,
669                   ieee80211_dynamic_ps_disable_work);
670         timer_setup(&local->dynamic_ps_timer, ieee80211_dynamic_ps_timer, 0);
671
672         INIT_WORK(&local->sched_scan_stopped_work,
673                   ieee80211_sched_scan_stopped_work);
674
675         INIT_WORK(&local->tdls_chsw_work, ieee80211_tdls_chsw_work);
676
677         spin_lock_init(&local->ack_status_lock);
678         idr_init(&local->ack_status_frames);
679
680         for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
681                 skb_queue_head_init(&local->pending[i]);
682                 atomic_set(&local->agg_queue_stop[i], 0);
683         }
684         tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
685                      (unsigned long)local);
686
687         tasklet_init(&local->tasklet,
688                      ieee80211_tasklet_handler,
689                      (unsigned long) local);
690
691         skb_queue_head_init(&local->skb_queue);
692         skb_queue_head_init(&local->skb_queue_unreliable);
693         skb_queue_head_init(&local->skb_queue_tdls_chsw);
694
695         ieee80211_alloc_led_names(local);
696
697         ieee80211_roc_setup(local);
698
699         local->hw.radiotap_timestamp.units_pos = -1;
700         local->hw.radiotap_timestamp.accuracy = -1;
701
702         return &local->hw;
703  err_free:
704         wiphy_free(wiphy);
705         return NULL;
706 }
707 EXPORT_SYMBOL(ieee80211_alloc_hw_nm);
708
709 static int ieee80211_init_cipher_suites(struct ieee80211_local *local)
710 {
711         bool have_wep = !(IS_ERR(local->wep_tx_tfm) ||
712                           IS_ERR(local->wep_rx_tfm));
713         bool have_mfp = ieee80211_hw_check(&local->hw, MFP_CAPABLE);
714         int n_suites = 0, r = 0, w = 0;
715         u32 *suites;
716         static const u32 cipher_suites[] = {
717                 /* keep WEP first, it may be removed below */
718                 WLAN_CIPHER_SUITE_WEP40,
719                 WLAN_CIPHER_SUITE_WEP104,
720                 WLAN_CIPHER_SUITE_TKIP,
721                 WLAN_CIPHER_SUITE_CCMP,
722                 WLAN_CIPHER_SUITE_CCMP_256,
723                 WLAN_CIPHER_SUITE_GCMP,
724                 WLAN_CIPHER_SUITE_GCMP_256,
725
726                 /* keep last -- depends on hw flags! */
727                 WLAN_CIPHER_SUITE_AES_CMAC,
728                 WLAN_CIPHER_SUITE_BIP_CMAC_256,
729                 WLAN_CIPHER_SUITE_BIP_GMAC_128,
730                 WLAN_CIPHER_SUITE_BIP_GMAC_256,
731         };
732
733         if (ieee80211_hw_check(&local->hw, SW_CRYPTO_CONTROL) ||
734             local->hw.wiphy->cipher_suites) {
735                 /* If the driver advertises, or doesn't support SW crypto,
736                  * we only need to remove WEP if necessary.
737                  */
738                 if (have_wep)
739                         return 0;
740
741                 /* well if it has _no_ ciphers ... fine */
742                 if (!local->hw.wiphy->n_cipher_suites)
743                         return 0;
744
745                 /* Driver provides cipher suites, but we need to exclude WEP */
746                 suites = kmemdup(local->hw.wiphy->cipher_suites,
747                                  sizeof(u32) * local->hw.wiphy->n_cipher_suites,
748                                  GFP_KERNEL);
749                 if (!suites)
750                         return -ENOMEM;
751
752                 for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
753                         u32 suite = local->hw.wiphy->cipher_suites[r];
754
755                         if (suite == WLAN_CIPHER_SUITE_WEP40 ||
756                             suite == WLAN_CIPHER_SUITE_WEP104)
757                                 continue;
758                         suites[w++] = suite;
759                 }
760         } else if (!local->hw.cipher_schemes) {
761                 /* If the driver doesn't have cipher schemes, there's nothing
762                  * else to do other than assign the (software supported and
763                  * perhaps offloaded) cipher suites.
764                  */
765                 local->hw.wiphy->cipher_suites = cipher_suites;
766                 local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
767
768                 if (!have_mfp)
769                         local->hw.wiphy->n_cipher_suites -= 4;
770
771                 if (!have_wep) {
772                         local->hw.wiphy->cipher_suites += 2;
773                         local->hw.wiphy->n_cipher_suites -= 2;
774                 }
775
776                 /* not dynamically allocated, so just return */
777                 return 0;
778         } else {
779                 const struct ieee80211_cipher_scheme *cs;
780
781                 cs = local->hw.cipher_schemes;
782
783                 /* Driver specifies cipher schemes only (but not cipher suites
784                  * including the schemes)
785                  *
786                  * We start counting ciphers defined by schemes, TKIP, CCMP,
787                  * CCMP-256, GCMP, and GCMP-256
788                  */
789                 n_suites = local->hw.n_cipher_schemes + 5;
790
791                 /* check if we have WEP40 and WEP104 */
792                 if (have_wep)
793                         n_suites += 2;
794
795                 /* check if we have AES_CMAC, BIP-CMAC-256, BIP-GMAC-128,
796                  * BIP-GMAC-256
797                  */
798                 if (have_mfp)
799                         n_suites += 4;
800
801                 suites = kmalloc_array(n_suites, sizeof(u32), GFP_KERNEL);
802                 if (!suites)
803                         return -ENOMEM;
804
805                 suites[w++] = WLAN_CIPHER_SUITE_CCMP;
806                 suites[w++] = WLAN_CIPHER_SUITE_CCMP_256;
807                 suites[w++] = WLAN_CIPHER_SUITE_TKIP;
808                 suites[w++] = WLAN_CIPHER_SUITE_GCMP;
809                 suites[w++] = WLAN_CIPHER_SUITE_GCMP_256;
810
811                 if (have_wep) {
812                         suites[w++] = WLAN_CIPHER_SUITE_WEP40;
813                         suites[w++] = WLAN_CIPHER_SUITE_WEP104;
814                 }
815
816                 if (have_mfp) {
817                         suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC;
818                         suites[w++] = WLAN_CIPHER_SUITE_BIP_CMAC_256;
819                         suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_128;
820                         suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_256;
821                 }
822
823                 for (r = 0; r < local->hw.n_cipher_schemes; r++) {
824                         suites[w++] = cs[r].cipher;
825                         if (WARN_ON(cs[r].pn_len > IEEE80211_MAX_PN_LEN)) {
826                                 kfree(suites);
827                                 return -EINVAL;
828                         }
829                 }
830         }
831
832         local->hw.wiphy->cipher_suites = suites;
833         local->hw.wiphy->n_cipher_suites = w;
834         local->wiphy_ciphers_allocated = true;
835
836         return 0;
837 }
838
839 int ieee80211_register_hw(struct ieee80211_hw *hw)
840 {
841         struct ieee80211_local *local = hw_to_local(hw);
842         int result, i;
843         enum nl80211_band band;
844         int channels, max_bitrates;
845         bool supp_ht, supp_vht, supp_he;
846         netdev_features_t feature_whitelist;
847         struct cfg80211_chan_def dflt_chandef = {};
848
849         if (ieee80211_hw_check(hw, QUEUE_CONTROL) &&
850             (local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE ||
851              local->hw.offchannel_tx_hw_queue >= local->hw.queues))
852                 return -EINVAL;
853
854         if ((hw->wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) &&
855             (!local->ops->tdls_channel_switch ||
856              !local->ops->tdls_cancel_channel_switch ||
857              !local->ops->tdls_recv_channel_switch))
858                 return -EOPNOTSUPP;
859
860         if (WARN_ON(ieee80211_hw_check(hw, SUPPORTS_TX_FRAG) &&
861                     !local->ops->set_frag_threshold))
862                 return -EINVAL;
863
864         if (WARN_ON(local->hw.wiphy->interface_modes &
865                         BIT(NL80211_IFTYPE_NAN) &&
866                     (!local->ops->start_nan || !local->ops->stop_nan)))
867                 return -EINVAL;
868
869 #ifdef CONFIG_PM
870         if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume))
871                 return -EINVAL;
872 #endif
873
874         if (!local->use_chanctx) {
875                 for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
876                         const struct ieee80211_iface_combination *comb;
877
878                         comb = &local->hw.wiphy->iface_combinations[i];
879
880                         if (comb->num_different_channels > 1)
881                                 return -EINVAL;
882                 }
883         } else {
884                 /*
885                  * WDS is currently prohibited when channel contexts are used
886                  * because there's no clear definition of which channel WDS
887                  * type interfaces use
888                  */
889                 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS))
890                         return -EINVAL;
891
892                 /* DFS is not supported with multi-channel combinations yet */
893                 for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
894                         const struct ieee80211_iface_combination *comb;
895
896                         comb = &local->hw.wiphy->iface_combinations[i];
897
898                         if (comb->radar_detect_widths &&
899                             comb->num_different_channels > 1)
900                                 return -EINVAL;
901                 }
902         }
903
904         /* Only HW csum features are currently compatible with mac80211 */
905         feature_whitelist = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
906                             NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA |
907                             NETIF_F_GSO_SOFTWARE | NETIF_F_RXCSUM;
908         if (WARN_ON(hw->netdev_features & ~feature_whitelist))
909                 return -EINVAL;
910
911         if (hw->max_report_rates == 0)
912                 hw->max_report_rates = hw->max_rates;
913
914         local->rx_chains = 1;
915
916         /*
917          * generic code guarantees at least one band,
918          * set this very early because much code assumes
919          * that hw.conf.channel is assigned
920          */
921         channels = 0;
922         max_bitrates = 0;
923         supp_ht = false;
924         supp_vht = false;
925         supp_he = false;
926         for (band = 0; band < NUM_NL80211_BANDS; band++) {
927                 struct ieee80211_supported_band *sband;
928
929                 sband = local->hw.wiphy->bands[band];
930                 if (!sband)
931                         continue;
932
933                 if (!dflt_chandef.chan) {
934                         /*
935                          * Assign the first enabled channel to dflt_chandef
936                          * from the list of channels
937                          */
938                         for (i = 0; i < sband->n_channels; i++)
939                                 if (!(sband->channels[i].flags &
940                                                 IEEE80211_CHAN_DISABLED))
941                                         break;
942                         /* if none found then use the first anyway */
943                         if (i == sband->n_channels)
944                                 i = 0;
945                         cfg80211_chandef_create(&dflt_chandef,
946                                                 &sband->channels[i],
947                                                 NL80211_CHAN_NO_HT);
948                         /* init channel we're on */
949                         if (!local->use_chanctx && !local->_oper_chandef.chan) {
950                                 local->hw.conf.chandef = dflt_chandef;
951                                 local->_oper_chandef = dflt_chandef;
952                         }
953                         local->monitor_chandef = dflt_chandef;
954                 }
955
956                 channels += sband->n_channels;
957
958                 if (max_bitrates < sband->n_bitrates)
959                         max_bitrates = sband->n_bitrates;
960                 supp_ht = supp_ht || sband->ht_cap.ht_supported;
961                 supp_vht = supp_vht || sband->vht_cap.vht_supported;
962
963                 if (!supp_he)
964                         supp_he = !!ieee80211_get_he_sta_cap(sband);
965
966                 if (!sband->ht_cap.ht_supported)
967                         continue;
968
969                 /* TODO: consider VHT for RX chains, hopefully it's the same */
970                 local->rx_chains =
971                         max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs),
972                             local->rx_chains);
973
974                 /* no need to mask, SM_PS_DISABLED has all bits set */
975                 sband->ht_cap.cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
976                                      IEEE80211_HT_CAP_SM_PS_SHIFT;
977         }
978
979         /* if low-level driver supports AP, we also support VLAN.
980          * drivers advertising SW_CRYPTO_CONTROL should enable AP_VLAN
981          * based on their support to transmit SW encrypted packets.
982          */
983         if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP) &&
984             !ieee80211_hw_check(&local->hw, SW_CRYPTO_CONTROL)) {
985                 hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
986                 hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
987         }
988
989         /* mac80211 always supports monitor */
990         hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
991         hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
992
993         /* mac80211 doesn't support more than one IBSS interface right now */
994         for (i = 0; i < hw->wiphy->n_iface_combinations; i++) {
995                 const struct ieee80211_iface_combination *c;
996                 int j;
997
998                 c = &hw->wiphy->iface_combinations[i];
999
1000                 for (j = 0; j < c->n_limits; j++)
1001                         if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) &&
1002                             c->limits[j].max > 1)
1003                                 return -EINVAL;
1004         }
1005
1006         local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
1007                                       sizeof(void *) * channels, GFP_KERNEL);
1008         if (!local->int_scan_req)
1009                 return -ENOMEM;
1010
1011         for (band = 0; band < NUM_NL80211_BANDS; band++) {
1012                 if (!local->hw.wiphy->bands[band])
1013                         continue;
1014                 local->int_scan_req->rates[band] = (u32) -1;
1015         }
1016
1017 #ifndef CONFIG_MAC80211_MESH
1018         /* mesh depends on Kconfig, but drivers should set it if they want */
1019         local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT);
1020 #endif
1021
1022         /* if the underlying driver supports mesh, mac80211 will (at least)
1023          * provide routing of mesh authentication frames to userspace */
1024         if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
1025                 local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH;
1026
1027         /* mac80211 supports control port protocol changing */
1028         local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
1029
1030         if (ieee80211_hw_check(&local->hw, SIGNAL_DBM)) {
1031                 local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
1032         } else if (ieee80211_hw_check(&local->hw, SIGNAL_UNSPEC)) {
1033                 local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
1034                 if (hw->max_signal <= 0) {
1035                         result = -EINVAL;
1036                         goto fail_wiphy_register;
1037                 }
1038         }
1039
1040         /*
1041          * Calculate scan IE length -- we need this to alloc
1042          * memory and to subtract from the driver limit. It
1043          * includes the DS Params, (extended) supported rates, and HT
1044          * information -- SSID is the driver's responsibility.
1045          */
1046         local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ +
1047                 3 /* DS Params */;
1048         if (supp_ht)
1049                 local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
1050
1051         if (supp_vht)
1052                 local->scan_ies_len +=
1053                         2 + sizeof(struct ieee80211_vht_cap);
1054
1055         /* HE cap element is variable in size - set len to allow max size */
1056         /*
1057          * TODO: 1 is added at the end of the calculation to accommodate for
1058          *      the temporary placing of the HE capabilities IE under EXT.
1059          *      Remove it once it is placed in the final place.
1060          */
1061         if (supp_he)
1062                 local->scan_ies_len +=
1063                         2 + sizeof(struct ieee80211_he_cap_elem) +
1064                         sizeof(struct ieee80211_he_mcs_nss_supp) +
1065                         IEEE80211_HE_PPE_THRES_MAX_LEN + 1;
1066
1067         if (!local->ops->hw_scan) {
1068                 /* For hw_scan, driver needs to set these up. */
1069                 local->hw.wiphy->max_scan_ssids = 4;
1070                 local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
1071         }
1072
1073         /*
1074          * If the driver supports any scan IEs, then assume the
1075          * limit includes the IEs mac80211 will add, otherwise
1076          * leave it at zero and let the driver sort it out; we
1077          * still pass our IEs to the driver but userspace will
1078          * not be allowed to in that case.
1079          */
1080         if (local->hw.wiphy->max_scan_ie_len)
1081                 local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
1082
1083         if (WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes,
1084                                              local->hw.n_cipher_schemes))) {
1085                 result = -EINVAL;
1086                 goto fail_workqueue;
1087         }
1088
1089         result = ieee80211_init_cipher_suites(local);
1090         if (result < 0)
1091                 goto fail_wiphy_register;
1092
1093         if (!local->ops->remain_on_channel)
1094                 local->hw.wiphy->max_remain_on_channel_duration = 5000;
1095
1096         /* mac80211 based drivers don't support internal TDLS setup */
1097         if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)
1098                 local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
1099
1100         /* mac80211 supports eCSA, if the driver supports STA CSA at all */
1101         if (ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA))
1102                 local->ext_capa[0] |= WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING;
1103
1104         local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CSA_COUNTERS_NUM;
1105
1106         result = wiphy_register(local->hw.wiphy);
1107         if (result < 0)
1108                 goto fail_wiphy_register;
1109
1110         /*
1111          * We use the number of queues for feature tests (QoS, HT) internally
1112          * so restrict them appropriately.
1113          */
1114         if (hw->queues > IEEE80211_MAX_QUEUES)
1115                 hw->queues = IEEE80211_MAX_QUEUES;
1116
1117         local->workqueue =
1118                 alloc_ordered_workqueue("%s", 0, wiphy_name(local->hw.wiphy));
1119         if (!local->workqueue) {
1120                 result = -ENOMEM;
1121                 goto fail_workqueue;
1122         }
1123
1124         /*
1125          * The hardware needs headroom for sending the frame,
1126          * and we need some headroom for passing the frame to monitor
1127          * interfaces, but never both at the same time.
1128          */
1129         local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
1130                                    IEEE80211_TX_STATUS_HEADROOM);
1131
1132         debugfs_hw_add(local);
1133
1134         /*
1135          * if the driver doesn't specify a max listen interval we
1136          * use 5 which should be a safe default
1137          */
1138         if (local->hw.max_listen_interval == 0)
1139                 local->hw.max_listen_interval = 5;
1140
1141         local->hw.conf.listen_interval = local->hw.max_listen_interval;
1142
1143         local->dynamic_ps_forced_timeout = -1;
1144
1145         if (!local->hw.max_nan_de_entries)
1146                 local->hw.max_nan_de_entries = IEEE80211_MAX_NAN_INSTANCE_ID;
1147
1148         result = ieee80211_wep_init(local);
1149         if (result < 0)
1150                 wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
1151                             result);
1152
1153         local->hw.conf.flags = IEEE80211_CONF_IDLE;
1154
1155         ieee80211_led_init(local);
1156
1157         result = ieee80211_txq_setup_flows(local);
1158         if (result)
1159                 goto fail_flows;
1160
1161         rtnl_lock();
1162
1163         result = ieee80211_init_rate_ctrl_alg(local,
1164                                               hw->rate_control_algorithm);
1165         if (result < 0) {
1166                 wiphy_debug(local->hw.wiphy,
1167                             "Failed to initialize rate control algorithm\n");
1168                 goto fail_rate;
1169         }
1170
1171         /* add one default STA interface if supported */
1172         if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) &&
1173             !ieee80211_hw_check(hw, NO_AUTO_VIF)) {
1174                 result = ieee80211_if_add(local, "wlan%d", NET_NAME_ENUM, NULL,
1175                                           NL80211_IFTYPE_STATION, NULL);
1176                 if (result)
1177                         wiphy_warn(local->hw.wiphy,
1178                                    "Failed to add default virtual iface\n");
1179         }
1180
1181         rtnl_unlock();
1182
1183 #ifdef CONFIG_INET
1184         local->ifa_notifier.notifier_call = ieee80211_ifa_changed;
1185         result = register_inetaddr_notifier(&local->ifa_notifier);
1186         if (result)
1187                 goto fail_ifa;
1188 #endif
1189
1190 #if IS_ENABLED(CONFIG_IPV6)
1191         local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
1192         result = register_inet6addr_notifier(&local->ifa6_notifier);
1193         if (result)
1194                 goto fail_ifa6;
1195 #endif
1196
1197         return 0;
1198
1199 #if IS_ENABLED(CONFIG_IPV6)
1200  fail_ifa6:
1201 #ifdef CONFIG_INET
1202         unregister_inetaddr_notifier(&local->ifa_notifier);
1203 #endif
1204 #endif
1205 #if defined(CONFIG_INET) || defined(CONFIG_IPV6)
1206  fail_ifa:
1207 #endif
1208         rtnl_lock();
1209         rate_control_deinitialize(local);
1210         ieee80211_remove_interfaces(local);
1211  fail_rate:
1212         rtnl_unlock();
1213         ieee80211_led_exit(local);
1214         ieee80211_wep_free(local);
1215  fail_flows:
1216         destroy_workqueue(local->workqueue);
1217  fail_workqueue:
1218         wiphy_unregister(local->hw.wiphy);
1219  fail_wiphy_register:
1220         if (local->wiphy_ciphers_allocated)
1221                 kfree(local->hw.wiphy->cipher_suites);
1222         kfree(local->int_scan_req);
1223         return result;
1224 }
1225 EXPORT_SYMBOL(ieee80211_register_hw);
1226
1227 void ieee80211_unregister_hw(struct ieee80211_hw *hw)
1228 {
1229         struct ieee80211_local *local = hw_to_local(hw);
1230
1231         tasklet_kill(&local->tx_pending_tasklet);
1232         tasklet_kill(&local->tasklet);
1233
1234 #ifdef CONFIG_INET
1235         unregister_inetaddr_notifier(&local->ifa_notifier);
1236 #endif
1237 #if IS_ENABLED(CONFIG_IPV6)
1238         unregister_inet6addr_notifier(&local->ifa6_notifier);
1239 #endif
1240
1241         rtnl_lock();
1242
1243         /*
1244          * At this point, interface list manipulations are fine
1245          * because the driver cannot be handing us frames any
1246          * more and the tasklet is killed.
1247          */
1248         ieee80211_remove_interfaces(local);
1249
1250         rtnl_unlock();
1251
1252         cancel_delayed_work_sync(&local->roc_work);
1253         cancel_work_sync(&local->restart_work);
1254         cancel_work_sync(&local->reconfig_filter);
1255         cancel_work_sync(&local->tdls_chsw_work);
1256         flush_work(&local->sched_scan_stopped_work);
1257         flush_work(&local->radar_detected_work);
1258
1259         ieee80211_clear_tx_pending(local);
1260         rate_control_deinitialize(local);
1261
1262         if (skb_queue_len(&local->skb_queue) ||
1263             skb_queue_len(&local->skb_queue_unreliable))
1264                 wiphy_warn(local->hw.wiphy, "skb_queue not empty\n");
1265         skb_queue_purge(&local->skb_queue);
1266         skb_queue_purge(&local->skb_queue_unreliable);
1267         skb_queue_purge(&local->skb_queue_tdls_chsw);
1268
1269         destroy_workqueue(local->workqueue);
1270         wiphy_unregister(local->hw.wiphy);
1271         ieee80211_wep_free(local);
1272         ieee80211_led_exit(local);
1273         kfree(local->int_scan_req);
1274 }
1275 EXPORT_SYMBOL(ieee80211_unregister_hw);
1276
1277 static int ieee80211_free_ack_frame(int id, void *p, void *data)
1278 {
1279         WARN_ONCE(1, "Have pending ack frames!\n");
1280         kfree_skb(p);
1281         return 0;
1282 }
1283
1284 void ieee80211_free_hw(struct ieee80211_hw *hw)
1285 {
1286         struct ieee80211_local *local = hw_to_local(hw);
1287
1288         mutex_destroy(&local->iflist_mtx);
1289         mutex_destroy(&local->mtx);
1290
1291         if (local->wiphy_ciphers_allocated)
1292                 kfree(local->hw.wiphy->cipher_suites);
1293
1294         idr_for_each(&local->ack_status_frames,
1295                      ieee80211_free_ack_frame, NULL);
1296         idr_destroy(&local->ack_status_frames);
1297
1298         sta_info_stop(local);
1299
1300         ieee80211_free_led_names(local);
1301
1302         wiphy_free(local->hw.wiphy);
1303 }
1304 EXPORT_SYMBOL(ieee80211_free_hw);
1305
1306 static int __init ieee80211_init(void)
1307 {
1308         struct sk_buff *skb;
1309         int ret;
1310
1311         BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
1312         BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
1313                      IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
1314
1315         ret = rc80211_minstrel_init();
1316         if (ret)
1317                 return ret;
1318
1319         ret = rc80211_minstrel_ht_init();
1320         if (ret)
1321                 goto err_minstrel;
1322
1323         ret = ieee80211_iface_init();
1324         if (ret)
1325                 goto err_netdev;
1326
1327         return 0;
1328  err_netdev:
1329         rc80211_minstrel_ht_exit();
1330  err_minstrel:
1331         rc80211_minstrel_exit();
1332
1333         return ret;
1334 }
1335
1336 static void __exit ieee80211_exit(void)
1337 {
1338         rc80211_minstrel_ht_exit();
1339         rc80211_minstrel_exit();
1340
1341         ieee80211s_stop();
1342
1343         ieee80211_iface_exit();
1344
1345         rcu_barrier();
1346 }
1347
1348
1349 subsys_initcall(ieee80211_init);
1350 module_exit(ieee80211_exit);
1351
1352 MODULE_DESCRIPTION("IEEE 802.11 subsystem");
1353 MODULE_LICENSE("GPL");