GNU Linux-libre 4.9.331-gnu1
[releases.git] / net / ipv4 / arp.c
1 /* linux/net/ipv4/arp.c
2  *
3  * Copyright (C) 1994 by Florian  La Roche
4  *
5  * This module implements the Address Resolution Protocol ARP (RFC 826),
6  * which is used to convert IP addresses (or in the future maybe other
7  * high-level addresses) into a low-level hardware address (like an Ethernet
8  * address).
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License
12  * as published by the Free Software Foundation; either version
13  * 2 of the License, or (at your option) any later version.
14  *
15  * Fixes:
16  *              Alan Cox        :       Removed the Ethernet assumptions in
17  *                                      Florian's code
18  *              Alan Cox        :       Fixed some small errors in the ARP
19  *                                      logic
20  *              Alan Cox        :       Allow >4K in /proc
21  *              Alan Cox        :       Make ARP add its own protocol entry
22  *              Ross Martin     :       Rewrote arp_rcv() and arp_get_info()
23  *              Stephen Henson  :       Add AX25 support to arp_get_info()
24  *              Alan Cox        :       Drop data when a device is downed.
25  *              Alan Cox        :       Use init_timer().
26  *              Alan Cox        :       Double lock fixes.
27  *              Martin Seine    :       Move the arphdr structure
28  *                                      to if_arp.h for compatibility.
29  *                                      with BSD based programs.
30  *              Andrew Tridgell :       Added ARP netmask code and
31  *                                      re-arranged proxy handling.
32  *              Alan Cox        :       Changed to use notifiers.
33  *              Niibe Yutaka    :       Reply for this device or proxies only.
34  *              Alan Cox        :       Don't proxy across hardware types!
35  *              Jonathan Naylor :       Added support for NET/ROM.
36  *              Mike Shaver     :       RFC1122 checks.
37  *              Jonathan Naylor :       Only lookup the hardware address for
38  *                                      the correct hardware type.
39  *              Germano Caronni :       Assorted subtle races.
40  *              Craig Schlenter :       Don't modify permanent entry
41  *                                      during arp_rcv.
42  *              Russ Nelson     :       Tidied up a few bits.
43  *              Alexey Kuznetsov:       Major changes to caching and behaviour,
44  *                                      eg intelligent arp probing and
45  *                                      generation
46  *                                      of host down events.
47  *              Alan Cox        :       Missing unlock in device events.
48  *              Eckes           :       ARP ioctl control errors.
49  *              Alexey Kuznetsov:       Arp free fix.
50  *              Manuel Rodriguez:       Gratuitous ARP.
51  *              Jonathan Layes  :       Added arpd support through kerneld
52  *                                      message queue (960314)
53  *              Mike Shaver     :       /proc/sys/net/ipv4/arp_* support
54  *              Mike McLagan    :       Routing by source
55  *              Stuart Cheshire :       Metricom and grat arp fixes
56  *                                      *** FOR 2.1 clean this up ***
57  *              Lawrence V. Stefani: (08/12/96) Added FDDI support.
58  *              Alan Cox        :       Took the AP1000 nasty FDDI hack and
59  *                                      folded into the mainstream FDDI code.
60  *                                      Ack spit, Linus how did you allow that
61  *                                      one in...
62  *              Jes Sorensen    :       Make FDDI work again in 2.1.x and
63  *                                      clean up the APFDDI & gen. FDDI bits.
64  *              Alexey Kuznetsov:       new arp state machine;
65  *                                      now it is in net/core/neighbour.c.
66  *              Krzysztof Halasa:       Added Frame Relay ARP support.
67  *              Arnaldo C. Melo :       convert /proc/net/arp to seq_file
68  *              Shmulik Hen:            Split arp_send to arp_create and
69  *                                      arp_xmit so intermediate drivers like
70  *                                      bonding can change the skb before
71  *                                      sending (e.g. insert 8021q tag).
72  *              Harald Welte    :       convert to make use of jenkins hash
73  *              Jesper D. Brouer:       Proxy ARP PVLAN RFC 3069 support.
74  */
75
76 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
77
78 #include <linux/module.h>
79 #include <linux/types.h>
80 #include <linux/string.h>
81 #include <linux/kernel.h>
82 #include <linux/capability.h>
83 #include <linux/socket.h>
84 #include <linux/sockios.h>
85 #include <linux/errno.h>
86 #include <linux/in.h>
87 #include <linux/mm.h>
88 #include <linux/inet.h>
89 #include <linux/inetdevice.h>
90 #include <linux/netdevice.h>
91 #include <linux/etherdevice.h>
92 #include <linux/fddidevice.h>
93 #include <linux/if_arp.h>
94 #include <linux/skbuff.h>
95 #include <linux/proc_fs.h>
96 #include <linux/seq_file.h>
97 #include <linux/stat.h>
98 #include <linux/init.h>
99 #include <linux/net.h>
100 #include <linux/rcupdate.h>
101 #include <linux/slab.h>
102 #ifdef CONFIG_SYSCTL
103 #include <linux/sysctl.h>
104 #endif
105
106 #include <net/net_namespace.h>
107 #include <net/ip.h>
108 #include <net/icmp.h>
109 #include <net/route.h>
110 #include <net/protocol.h>
111 #include <net/tcp.h>
112 #include <net/sock.h>
113 #include <net/arp.h>
114 #include <net/ax25.h>
115 #include <net/netrom.h>
116 #include <net/dst_metadata.h>
117 #include <net/ip_tunnels.h>
118
119 #include <linux/uaccess.h>
120
121 #include <linux/netfilter_arp.h>
122
123 /*
124  *      Interface to generic neighbour cache.
125  */
126 static u32 arp_hash(const void *pkey, const struct net_device *dev, __u32 *hash_rnd);
127 static bool arp_key_eq(const struct neighbour *n, const void *pkey);
128 static int arp_constructor(struct neighbour *neigh);
129 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
130 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
131 static void parp_redo(struct sk_buff *skb);
132
133 static const struct neigh_ops arp_generic_ops = {
134         .family =               AF_INET,
135         .solicit =              arp_solicit,
136         .error_report =         arp_error_report,
137         .output =               neigh_resolve_output,
138         .connected_output =     neigh_connected_output,
139 };
140
141 static const struct neigh_ops arp_hh_ops = {
142         .family =               AF_INET,
143         .solicit =              arp_solicit,
144         .error_report =         arp_error_report,
145         .output =               neigh_resolve_output,
146         .connected_output =     neigh_resolve_output,
147 };
148
149 static const struct neigh_ops arp_direct_ops = {
150         .family =               AF_INET,
151         .output =               neigh_direct_output,
152         .connected_output =     neigh_direct_output,
153 };
154
155 struct neigh_table arp_tbl = {
156         .family         = AF_INET,
157         .key_len        = 4,
158         .protocol       = cpu_to_be16(ETH_P_IP),
159         .hash           = arp_hash,
160         .key_eq         = arp_key_eq,
161         .constructor    = arp_constructor,
162         .proxy_redo     = parp_redo,
163         .id             = "arp_cache",
164         .parms          = {
165                 .tbl                    = &arp_tbl,
166                 .reachable_time         = 30 * HZ,
167                 .data   = {
168                         [NEIGH_VAR_MCAST_PROBES] = 3,
169                         [NEIGH_VAR_UCAST_PROBES] = 3,
170                         [NEIGH_VAR_RETRANS_TIME] = 1 * HZ,
171                         [NEIGH_VAR_BASE_REACHABLE_TIME] = 30 * HZ,
172                         [NEIGH_VAR_DELAY_PROBE_TIME] = 5 * HZ,
173                         [NEIGH_VAR_GC_STALETIME] = 60 * HZ,
174                         [NEIGH_VAR_QUEUE_LEN_BYTES] = 64 * 1024,
175                         [NEIGH_VAR_PROXY_QLEN] = 64,
176                         [NEIGH_VAR_ANYCAST_DELAY] = 1 * HZ,
177                         [NEIGH_VAR_PROXY_DELAY] = (8 * HZ) / 10,
178                         [NEIGH_VAR_LOCKTIME] = 1 * HZ,
179                 },
180         },
181         .gc_interval    = 30 * HZ,
182         .gc_thresh1     = 128,
183         .gc_thresh2     = 512,
184         .gc_thresh3     = 1024,
185 };
186 EXPORT_SYMBOL(arp_tbl);
187
188 int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
189 {
190         switch (dev->type) {
191         case ARPHRD_ETHER:
192         case ARPHRD_FDDI:
193         case ARPHRD_IEEE802:
194                 ip_eth_mc_map(addr, haddr);
195                 return 0;
196         case ARPHRD_INFINIBAND:
197                 ip_ib_mc_map(addr, dev->broadcast, haddr);
198                 return 0;
199         case ARPHRD_IPGRE:
200                 ip_ipgre_mc_map(addr, dev->broadcast, haddr);
201                 return 0;
202         default:
203                 if (dir) {
204                         memcpy(haddr, dev->broadcast, dev->addr_len);
205                         return 0;
206                 }
207         }
208         return -EINVAL;
209 }
210
211
212 static u32 arp_hash(const void *pkey,
213                     const struct net_device *dev,
214                     __u32 *hash_rnd)
215 {
216         return arp_hashfn(pkey, dev, hash_rnd);
217 }
218
219 static bool arp_key_eq(const struct neighbour *neigh, const void *pkey)
220 {
221         return neigh_key_eq32(neigh, pkey);
222 }
223
224 static int arp_constructor(struct neighbour *neigh)
225 {
226         __be32 addr;
227         struct net_device *dev = neigh->dev;
228         struct in_device *in_dev;
229         struct neigh_parms *parms;
230         u32 inaddr_any = INADDR_ANY;
231
232         if (dev->flags & (IFF_LOOPBACK | IFF_POINTOPOINT))
233                 memcpy(neigh->primary_key, &inaddr_any, arp_tbl.key_len);
234
235         addr = *(__be32 *)neigh->primary_key;
236         rcu_read_lock();
237         in_dev = __in_dev_get_rcu(dev);
238         if (!in_dev) {
239                 rcu_read_unlock();
240                 return -EINVAL;
241         }
242
243         neigh->type = inet_addr_type_dev_table(dev_net(dev), dev, addr);
244
245         parms = in_dev->arp_parms;
246         __neigh_parms_put(neigh->parms);
247         neigh->parms = neigh_parms_clone(parms);
248         rcu_read_unlock();
249
250         if (!dev->header_ops) {
251                 neigh->nud_state = NUD_NOARP;
252                 neigh->ops = &arp_direct_ops;
253                 neigh->output = neigh_direct_output;
254         } else {
255                 /* Good devices (checked by reading texts, but only Ethernet is
256                    tested)
257
258                    ARPHRD_ETHER: (ethernet, apfddi)
259                    ARPHRD_FDDI: (fddi)
260                    ARPHRD_IEEE802: (tr)
261                    ARPHRD_METRICOM: (strip)
262                    ARPHRD_ARCNET:
263                    etc. etc. etc.
264
265                    ARPHRD_IPDDP will also work, if author repairs it.
266                    I did not it, because this driver does not work even
267                    in old paradigm.
268                  */
269
270                 if (neigh->type == RTN_MULTICAST) {
271                         neigh->nud_state = NUD_NOARP;
272                         arp_mc_map(addr, neigh->ha, dev, 1);
273                 } else if (dev->flags & (IFF_NOARP | IFF_LOOPBACK)) {
274                         neigh->nud_state = NUD_NOARP;
275                         memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
276                 } else if (neigh->type == RTN_BROADCAST ||
277                            (dev->flags & IFF_POINTOPOINT)) {
278                         neigh->nud_state = NUD_NOARP;
279                         memcpy(neigh->ha, dev->broadcast, dev->addr_len);
280                 }
281
282                 if (dev->header_ops->cache)
283                         neigh->ops = &arp_hh_ops;
284                 else
285                         neigh->ops = &arp_generic_ops;
286
287                 if (neigh->nud_state & NUD_VALID)
288                         neigh->output = neigh->ops->connected_output;
289                 else
290                         neigh->output = neigh->ops->output;
291         }
292         return 0;
293 }
294
295 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
296 {
297         dst_link_failure(skb);
298         kfree_skb(skb);
299 }
300
301 /* Create and send an arp packet. */
302 static void arp_send_dst(int type, int ptype, __be32 dest_ip,
303                          struct net_device *dev, __be32 src_ip,
304                          const unsigned char *dest_hw,
305                          const unsigned char *src_hw,
306                          const unsigned char *target_hw,
307                          struct dst_entry *dst)
308 {
309         struct sk_buff *skb;
310
311         /* arp on this interface. */
312         if (dev->flags & IFF_NOARP)
313                 return;
314
315         skb = arp_create(type, ptype, dest_ip, dev, src_ip,
316                          dest_hw, src_hw, target_hw);
317         if (!skb)
318                 return;
319
320         skb_dst_set(skb, dst_clone(dst));
321         arp_xmit(skb);
322 }
323
324 void arp_send(int type, int ptype, __be32 dest_ip,
325               struct net_device *dev, __be32 src_ip,
326               const unsigned char *dest_hw, const unsigned char *src_hw,
327               const unsigned char *target_hw)
328 {
329         arp_send_dst(type, ptype, dest_ip, dev, src_ip, dest_hw, src_hw,
330                      target_hw, NULL);
331 }
332 EXPORT_SYMBOL(arp_send);
333
334 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
335 {
336         __be32 saddr = 0;
337         u8 dst_ha[MAX_ADDR_LEN], *dst_hw = NULL;
338         struct net_device *dev = neigh->dev;
339         __be32 target = *(__be32 *)neigh->primary_key;
340         int probes = atomic_read(&neigh->probes);
341         struct in_device *in_dev;
342         struct dst_entry *dst = NULL;
343
344         rcu_read_lock();
345         in_dev = __in_dev_get_rcu(dev);
346         if (!in_dev) {
347                 rcu_read_unlock();
348                 return;
349         }
350         switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
351         default:
352         case 0:         /* By default announce any local IP */
353                 if (skb && inet_addr_type_dev_table(dev_net(dev), dev,
354                                           ip_hdr(skb)->saddr) == RTN_LOCAL)
355                         saddr = ip_hdr(skb)->saddr;
356                 break;
357         case 1:         /* Restrict announcements of saddr in same subnet */
358                 if (!skb)
359                         break;
360                 saddr = ip_hdr(skb)->saddr;
361                 if (inet_addr_type_dev_table(dev_net(dev), dev,
362                                              saddr) == RTN_LOCAL) {
363                         /* saddr should be known to target */
364                         if (inet_addr_onlink(in_dev, target, saddr))
365                                 break;
366                 }
367                 saddr = 0;
368                 break;
369         case 2:         /* Avoid secondary IPs, get a primary/preferred one */
370                 break;
371         }
372         rcu_read_unlock();
373
374         if (!saddr)
375                 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
376
377         probes -= NEIGH_VAR(neigh->parms, UCAST_PROBES);
378         if (probes < 0) {
379                 if (!(neigh->nud_state & NUD_VALID))
380                         pr_debug("trying to ucast probe in NUD_INVALID\n");
381                 neigh_ha_snapshot(dst_ha, neigh, dev);
382                 dst_hw = dst_ha;
383         } else {
384                 probes -= NEIGH_VAR(neigh->parms, APP_PROBES);
385                 if (probes < 0) {
386                         neigh_app_ns(neigh);
387                         return;
388                 }
389         }
390
391         if (skb && !(dev->priv_flags & IFF_XMIT_DST_RELEASE))
392                 dst = skb_dst(skb);
393         arp_send_dst(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
394                      dst_hw, dev->dev_addr, NULL, dst);
395 }
396
397 static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip)
398 {
399         struct net *net = dev_net(in_dev->dev);
400         int scope;
401
402         switch (IN_DEV_ARP_IGNORE(in_dev)) {
403         case 0: /* Reply, the tip is already validated */
404                 return 0;
405         case 1: /* Reply only if tip is configured on the incoming interface */
406                 sip = 0;
407                 scope = RT_SCOPE_HOST;
408                 break;
409         case 2: /*
410                  * Reply only if tip is configured on the incoming interface
411                  * and is in same subnet as sip
412                  */
413                 scope = RT_SCOPE_HOST;
414                 break;
415         case 3: /* Do not reply for scope host addresses */
416                 sip = 0;
417                 scope = RT_SCOPE_LINK;
418                 in_dev = NULL;
419                 break;
420         case 4: /* Reserved */
421         case 5:
422         case 6:
423         case 7:
424                 return 0;
425         case 8: /* Do not reply */
426                 return 1;
427         default:
428                 return 0;
429         }
430         return !inet_confirm_addr(net, in_dev, sip, tip, scope);
431 }
432
433 static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
434 {
435         struct rtable *rt;
436         int flag = 0;
437         /*unsigned long now; */
438         struct net *net = dev_net(dev);
439
440         rt = ip_route_output(net, sip, tip, 0, l3mdev_master_ifindex_rcu(dev));
441         if (IS_ERR(rt))
442                 return 1;
443         if (rt->dst.dev != dev) {
444                 __NET_INC_STATS(net, LINUX_MIB_ARPFILTER);
445                 flag = 1;
446         }
447         ip_rt_put(rt);
448         return flag;
449 }
450
451 /*
452  * Check if we can use proxy ARP for this path
453  */
454 static inline int arp_fwd_proxy(struct in_device *in_dev,
455                                 struct net_device *dev, struct rtable *rt)
456 {
457         struct in_device *out_dev;
458         int imi, omi = -1;
459
460         if (rt->dst.dev == dev)
461                 return 0;
462
463         if (!IN_DEV_PROXY_ARP(in_dev))
464                 return 0;
465         imi = IN_DEV_MEDIUM_ID(in_dev);
466         if (imi == 0)
467                 return 1;
468         if (imi == -1)
469                 return 0;
470
471         /* place to check for proxy_arp for routes */
472
473         out_dev = __in_dev_get_rcu(rt->dst.dev);
474         if (out_dev)
475                 omi = IN_DEV_MEDIUM_ID(out_dev);
476
477         return omi != imi && omi != -1;
478 }
479
480 /*
481  * Check for RFC3069 proxy arp private VLAN (allow to send back to same dev)
482  *
483  * RFC3069 supports proxy arp replies back to the same interface.  This
484  * is done to support (ethernet) switch features, like RFC 3069, where
485  * the individual ports are not allowed to communicate with each
486  * other, BUT they are allowed to talk to the upstream router.  As
487  * described in RFC 3069, it is possible to allow these hosts to
488  * communicate through the upstream router, by proxy_arp'ing.
489  *
490  * RFC 3069: "VLAN Aggregation for Efficient IP Address Allocation"
491  *
492  *  This technology is known by different names:
493  *    In RFC 3069 it is called VLAN Aggregation.
494  *    Cisco and Allied Telesyn call it Private VLAN.
495  *    Hewlett-Packard call it Source-Port filtering or port-isolation.
496  *    Ericsson call it MAC-Forced Forwarding (RFC Draft).
497  *
498  */
499 static inline int arp_fwd_pvlan(struct in_device *in_dev,
500                                 struct net_device *dev, struct rtable *rt,
501                                 __be32 sip, __be32 tip)
502 {
503         /* Private VLAN is only concerned about the same ethernet segment */
504         if (rt->dst.dev != dev)
505                 return 0;
506
507         /* Don't reply on self probes (often done by windowz boxes)*/
508         if (sip == tip)
509                 return 0;
510
511         if (IN_DEV_PROXY_ARP_PVLAN(in_dev))
512                 return 1;
513         else
514                 return 0;
515 }
516
517 /*
518  *      Interface to link layer: send routine and receive handler.
519  */
520
521 /*
522  *      Create an arp packet. If dest_hw is not set, we create a broadcast
523  *      message.
524  */
525 struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
526                            struct net_device *dev, __be32 src_ip,
527                            const unsigned char *dest_hw,
528                            const unsigned char *src_hw,
529                            const unsigned char *target_hw)
530 {
531         struct sk_buff *skb;
532         struct arphdr *arp;
533         unsigned char *arp_ptr;
534         int hlen = LL_RESERVED_SPACE(dev);
535         int tlen = dev->needed_tailroom;
536
537         /*
538          *      Allocate a buffer
539          */
540
541         skb = alloc_skb(arp_hdr_len(dev) + hlen + tlen, GFP_ATOMIC);
542         if (!skb)
543                 return NULL;
544
545         skb_reserve(skb, hlen);
546         skb_reset_network_header(skb);
547         arp = (struct arphdr *) skb_put(skb, arp_hdr_len(dev));
548         skb->dev = dev;
549         skb->protocol = htons(ETH_P_ARP);
550         if (!src_hw)
551                 src_hw = dev->dev_addr;
552         if (!dest_hw)
553                 dest_hw = dev->broadcast;
554
555         /*
556          *      Fill the device header for the ARP frame
557          */
558         if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0)
559                 goto out;
560
561         /*
562          * Fill out the arp protocol part.
563          *
564          * The arp hardware type should match the device type, except for FDDI,
565          * which (according to RFC 1390) should always equal 1 (Ethernet).
566          */
567         /*
568          *      Exceptions everywhere. AX.25 uses the AX.25 PID value not the
569          *      DIX code for the protocol. Make these device structure fields.
570          */
571         switch (dev->type) {
572         default:
573                 arp->ar_hrd = htons(dev->type);
574                 arp->ar_pro = htons(ETH_P_IP);
575                 break;
576
577 #if IS_ENABLED(CONFIG_AX25)
578         case ARPHRD_AX25:
579                 arp->ar_hrd = htons(ARPHRD_AX25);
580                 arp->ar_pro = htons(AX25_P_IP);
581                 break;
582
583 #if IS_ENABLED(CONFIG_NETROM)
584         case ARPHRD_NETROM:
585                 arp->ar_hrd = htons(ARPHRD_NETROM);
586                 arp->ar_pro = htons(AX25_P_IP);
587                 break;
588 #endif
589 #endif
590
591 #if IS_ENABLED(CONFIG_FDDI)
592         case ARPHRD_FDDI:
593                 arp->ar_hrd = htons(ARPHRD_ETHER);
594                 arp->ar_pro = htons(ETH_P_IP);
595                 break;
596 #endif
597         }
598
599         arp->ar_hln = dev->addr_len;
600         arp->ar_pln = 4;
601         arp->ar_op = htons(type);
602
603         arp_ptr = (unsigned char *)(arp + 1);
604
605         memcpy(arp_ptr, src_hw, dev->addr_len);
606         arp_ptr += dev->addr_len;
607         memcpy(arp_ptr, &src_ip, 4);
608         arp_ptr += 4;
609
610         switch (dev->type) {
611 #if IS_ENABLED(CONFIG_FIREWIRE_NET)
612         case ARPHRD_IEEE1394:
613                 break;
614 #endif
615         default:
616                 if (target_hw)
617                         memcpy(arp_ptr, target_hw, dev->addr_len);
618                 else
619                         memset(arp_ptr, 0, dev->addr_len);
620                 arp_ptr += dev->addr_len;
621         }
622         memcpy(arp_ptr, &dest_ip, 4);
623
624         return skb;
625
626 out:
627         kfree_skb(skb);
628         return NULL;
629 }
630 EXPORT_SYMBOL(arp_create);
631
632 static int arp_xmit_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
633 {
634         return dev_queue_xmit(skb);
635 }
636
637 /*
638  *      Send an arp packet.
639  */
640 void arp_xmit(struct sk_buff *skb)
641 {
642         /* Send it off, maybe filter it using firewalling first.  */
643         NF_HOOK(NFPROTO_ARP, NF_ARP_OUT,
644                 dev_net(skb->dev), NULL, skb, NULL, skb->dev,
645                 arp_xmit_finish);
646 }
647 EXPORT_SYMBOL(arp_xmit);
648
649 /*
650  *      Process an arp request.
651  */
652
653 static int arp_process(struct net *net, struct sock *sk, struct sk_buff *skb)
654 {
655         struct net_device *dev = skb->dev;
656         struct in_device *in_dev = __in_dev_get_rcu(dev);
657         struct arphdr *arp;
658         unsigned char *arp_ptr;
659         struct rtable *rt;
660         unsigned char *sha;
661         unsigned char *tha = NULL;
662         __be32 sip, tip;
663         u16 dev_type = dev->type;
664         int addr_type;
665         struct neighbour *n;
666         struct dst_entry *reply_dst = NULL;
667         bool is_garp = false;
668
669         /* arp_rcv below verifies the ARP header and verifies the device
670          * is ARP'able.
671          */
672
673         if (!in_dev)
674                 goto out_free_skb;
675
676         arp = arp_hdr(skb);
677
678         switch (dev_type) {
679         default:
680                 if (arp->ar_pro != htons(ETH_P_IP) ||
681                     htons(dev_type) != arp->ar_hrd)
682                         goto out_free_skb;
683                 break;
684         case ARPHRD_ETHER:
685         case ARPHRD_FDDI:
686         case ARPHRD_IEEE802:
687                 /*
688                  * ETHERNET, and Fibre Channel (which are IEEE 802
689                  * devices, according to RFC 2625) devices will accept ARP
690                  * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
691                  * This is the case also of FDDI, where the RFC 1390 says that
692                  * FDDI devices should accept ARP hardware of (1) Ethernet,
693                  * however, to be more robust, we'll accept both 1 (Ethernet)
694                  * or 6 (IEEE 802.2)
695                  */
696                 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
697                      arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
698                     arp->ar_pro != htons(ETH_P_IP))
699                         goto out_free_skb;
700                 break;
701         case ARPHRD_AX25:
702                 if (arp->ar_pro != htons(AX25_P_IP) ||
703                     arp->ar_hrd != htons(ARPHRD_AX25))
704                         goto out_free_skb;
705                 break;
706         case ARPHRD_NETROM:
707                 if (arp->ar_pro != htons(AX25_P_IP) ||
708                     arp->ar_hrd != htons(ARPHRD_NETROM))
709                         goto out_free_skb;
710                 break;
711         }
712
713         /* Understand only these message types */
714
715         if (arp->ar_op != htons(ARPOP_REPLY) &&
716             arp->ar_op != htons(ARPOP_REQUEST))
717                 goto out_free_skb;
718
719 /*
720  *      Extract fields
721  */
722         arp_ptr = (unsigned char *)(arp + 1);
723         sha     = arp_ptr;
724         arp_ptr += dev->addr_len;
725         memcpy(&sip, arp_ptr, 4);
726         arp_ptr += 4;
727         switch (dev_type) {
728 #if IS_ENABLED(CONFIG_FIREWIRE_NET)
729         case ARPHRD_IEEE1394:
730                 break;
731 #endif
732         default:
733                 tha = arp_ptr;
734                 arp_ptr += dev->addr_len;
735         }
736         memcpy(&tip, arp_ptr, 4);
737 /*
738  *      Check for bad requests for 127.x.x.x and requests for multicast
739  *      addresses.  If this is one such, delete it.
740  */
741         if (ipv4_is_multicast(tip) ||
742             (!IN_DEV_ROUTE_LOCALNET(in_dev) && ipv4_is_loopback(tip)))
743                 goto out_free_skb;
744
745  /*
746   *     For some 802.11 wireless deployments (and possibly other networks),
747   *     there will be an ARP proxy and gratuitous ARP frames are attacks
748   *     and thus should not be accepted.
749   */
750         if (sip == tip && IN_DEV_ORCONF(in_dev, DROP_GRATUITOUS_ARP))
751                 goto out_free_skb;
752
753 /*
754  *     Special case: We must set Frame Relay source Q.922 address
755  */
756         if (dev_type == ARPHRD_DLCI)
757                 sha = dev->broadcast;
758
759 /*
760  *  Process entry.  The idea here is we want to send a reply if it is a
761  *  request for us or if it is a request for someone else that we hold
762  *  a proxy for.  We want to add an entry to our cache if it is a reply
763  *  to us or if it is a request for our address.
764  *  (The assumption for this last is that if someone is requesting our
765  *  address, they are probably intending to talk to us, so it saves time
766  *  if we cache their address.  Their address is also probably not in
767  *  our cache, since ours is not in their cache.)
768  *
769  *  Putting this another way, we only care about replies if they are to
770  *  us, in which case we add them to the cache.  For requests, we care
771  *  about those for us and those for our proxies.  We reply to both,
772  *  and in the case of requests for us we add the requester to the arp
773  *  cache.
774  */
775
776         if (arp->ar_op == htons(ARPOP_REQUEST) && skb_metadata_dst(skb))
777                 reply_dst = (struct dst_entry *)
778                             iptunnel_metadata_reply(skb_metadata_dst(skb),
779                                                     GFP_ATOMIC);
780
781         /* Special case: IPv4 duplicate address detection packet (RFC2131) */
782         if (sip == 0) {
783                 if (arp->ar_op == htons(ARPOP_REQUEST) &&
784                     inet_addr_type_dev_table(net, dev, tip) == RTN_LOCAL &&
785                     !arp_ignore(in_dev, sip, tip))
786                         arp_send_dst(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip,
787                                      sha, dev->dev_addr, sha, reply_dst);
788                 goto out_consume_skb;
789         }
790
791         if (arp->ar_op == htons(ARPOP_REQUEST) &&
792             ip_route_input_noref(skb, tip, sip, 0, dev) == 0) {
793
794                 rt = skb_rtable(skb);
795                 addr_type = rt->rt_type;
796
797                 if (addr_type == RTN_LOCAL) {
798                         int dont_send;
799
800                         dont_send = arp_ignore(in_dev, sip, tip);
801                         if (!dont_send && IN_DEV_ARPFILTER(in_dev))
802                                 dont_send = arp_filter(sip, tip, dev);
803                         if (!dont_send) {
804                                 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
805                                 if (n) {
806                                         arp_send_dst(ARPOP_REPLY, ETH_P_ARP,
807                                                      sip, dev, tip, sha,
808                                                      dev->dev_addr, sha,
809                                                      reply_dst);
810                                         neigh_release(n);
811                                 }
812                         }
813                         goto out_consume_skb;
814                 } else if (IN_DEV_FORWARD(in_dev)) {
815                         if (addr_type == RTN_UNICAST  &&
816                             (arp_fwd_proxy(in_dev, dev, rt) ||
817                              arp_fwd_pvlan(in_dev, dev, rt, sip, tip) ||
818                              (rt->dst.dev != dev &&
819                               pneigh_lookup(&arp_tbl, net, &tip, dev, 0)))) {
820                                 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
821                                 if (n)
822                                         neigh_release(n);
823
824                                 if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED ||
825                                     skb->pkt_type == PACKET_HOST ||
826                                     NEIGH_VAR(in_dev->arp_parms, PROXY_DELAY) == 0) {
827                                         arp_send_dst(ARPOP_REPLY, ETH_P_ARP,
828                                                      sip, dev, tip, sha,
829                                                      dev->dev_addr, sha,
830                                                      reply_dst);
831                                 } else {
832                                         pneigh_enqueue(&arp_tbl,
833                                                        in_dev->arp_parms, skb);
834                                         goto out_free_dst;
835                                 }
836                                 goto out_consume_skb;
837                         }
838                 }
839         }
840
841         /* Update our ARP tables */
842
843         n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
844
845         if (IN_DEV_ARP_ACCEPT(in_dev)) {
846                 unsigned int addr_type = inet_addr_type_dev_table(net, dev, sip);
847
848                 /* Unsolicited ARP is not accepted by default.
849                    It is possible, that this option should be enabled for some
850                    devices (strip is candidate)
851                  */
852                 is_garp = tip == sip && addr_type == RTN_UNICAST;
853
854                 /* Unsolicited ARP _replies_ also require target hwaddr to be
855                  * the same as source.
856                  */
857                 if (is_garp && arp->ar_op == htons(ARPOP_REPLY))
858                         is_garp =
859                                 /* IPv4 over IEEE 1394 doesn't provide target
860                                  * hardware address field in its ARP payload.
861                                  */
862                                 tha &&
863                                 !memcmp(tha, sha, dev->addr_len);
864
865                 if (!n &&
866                     ((arp->ar_op == htons(ARPOP_REPLY)  &&
867                                 addr_type == RTN_UNICAST) || is_garp))
868                         n = __neigh_lookup(&arp_tbl, &sip, dev, 1);
869         }
870
871         if (n) {
872                 int state = NUD_REACHABLE;
873                 int override;
874
875                 /* If several different ARP replies follows back-to-back,
876                    use the FIRST one. It is possible, if several proxy
877                    agents are active. Taking the first reply prevents
878                    arp trashing and chooses the fastest router.
879                  */
880                 override = time_after(jiffies,
881                                       n->updated +
882                                       NEIGH_VAR(n->parms, LOCKTIME)) ||
883                            is_garp;
884
885                 /* Broadcast replies and request packets
886                    do not assert neighbour reachability.
887                  */
888                 if (arp->ar_op != htons(ARPOP_REPLY) ||
889                     skb->pkt_type != PACKET_HOST)
890                         state = NUD_STALE;
891                 neigh_update(n, sha, state,
892                              override ? NEIGH_UPDATE_F_OVERRIDE : 0);
893                 neigh_release(n);
894         }
895
896 out_consume_skb:
897         consume_skb(skb);
898
899 out_free_dst:
900         dst_release(reply_dst);
901         return NET_RX_SUCCESS;
902
903 out_free_skb:
904         kfree_skb(skb);
905         return NET_RX_DROP;
906 }
907
908 static void parp_redo(struct sk_buff *skb)
909 {
910         arp_process(dev_net(skb->dev), NULL, skb);
911 }
912
913
914 /*
915  *      Receive an arp request from the device layer.
916  */
917
918 static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
919                    struct packet_type *pt, struct net_device *orig_dev)
920 {
921         const struct arphdr *arp;
922
923         /* do not tweak dropwatch on an ARP we will ignore */
924         if (dev->flags & IFF_NOARP ||
925             skb->pkt_type == PACKET_OTHERHOST ||
926             skb->pkt_type == PACKET_LOOPBACK)
927                 goto consumeskb;
928
929         skb = skb_share_check(skb, GFP_ATOMIC);
930         if (!skb)
931                 goto out_of_mem;
932
933         /* ARP header, plus 2 device addresses, plus 2 IP addresses.  */
934         if (!pskb_may_pull(skb, arp_hdr_len(dev)))
935                 goto freeskb;
936
937         arp = arp_hdr(skb);
938         if (arp->ar_hln != dev->addr_len || arp->ar_pln != 4)
939                 goto freeskb;
940
941         memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
942
943         return NF_HOOK(NFPROTO_ARP, NF_ARP_IN,
944                        dev_net(dev), NULL, skb, dev, NULL,
945                        arp_process);
946
947 consumeskb:
948         consume_skb(skb);
949         return NET_RX_SUCCESS;
950 freeskb:
951         kfree_skb(skb);
952 out_of_mem:
953         return NET_RX_DROP;
954 }
955
956 /*
957  *      User level interface (ioctl)
958  */
959
960 /*
961  *      Set (create) an ARP cache entry.
962  */
963
964 static int arp_req_set_proxy(struct net *net, struct net_device *dev, int on)
965 {
966         if (!dev) {
967                 IPV4_DEVCONF_ALL(net, PROXY_ARP) = on;
968                 return 0;
969         }
970         if (__in_dev_get_rtnl(dev)) {
971                 IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, on);
972                 return 0;
973         }
974         return -ENXIO;
975 }
976
977 static int arp_req_set_public(struct net *net, struct arpreq *r,
978                 struct net_device *dev)
979 {
980         __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
981         __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
982
983         if (mask && mask != htonl(0xFFFFFFFF))
984                 return -EINVAL;
985         if (!dev && (r->arp_flags & ATF_COM)) {
986                 dev = dev_getbyhwaddr_rcu(net, r->arp_ha.sa_family,
987                                       r->arp_ha.sa_data);
988                 if (!dev)
989                         return -ENODEV;
990         }
991         if (mask) {
992                 if (!pneigh_lookup(&arp_tbl, net, &ip, dev, 1))
993                         return -ENOBUFS;
994                 return 0;
995         }
996
997         return arp_req_set_proxy(net, dev, 1);
998 }
999
1000 static int arp_req_set(struct net *net, struct arpreq *r,
1001                        struct net_device *dev)
1002 {
1003         __be32 ip;
1004         struct neighbour *neigh;
1005         int err;
1006
1007         if (r->arp_flags & ATF_PUBL)
1008                 return arp_req_set_public(net, r, dev);
1009
1010         ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1011         if (r->arp_flags & ATF_PERM)
1012                 r->arp_flags |= ATF_COM;
1013         if (!dev) {
1014                 struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0);
1015
1016                 if (IS_ERR(rt))
1017                         return PTR_ERR(rt);
1018                 dev = rt->dst.dev;
1019                 ip_rt_put(rt);
1020                 if (!dev)
1021                         return -EINVAL;
1022         }
1023         switch (dev->type) {
1024 #if IS_ENABLED(CONFIG_FDDI)
1025         case ARPHRD_FDDI:
1026                 /*
1027                  * According to RFC 1390, FDDI devices should accept ARP
1028                  * hardware types of 1 (Ethernet).  However, to be more
1029                  * robust, we'll accept hardware types of either 1 (Ethernet)
1030                  * or 6 (IEEE 802.2).
1031                  */
1032                 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
1033                     r->arp_ha.sa_family != ARPHRD_ETHER &&
1034                     r->arp_ha.sa_family != ARPHRD_IEEE802)
1035                         return -EINVAL;
1036                 break;
1037 #endif
1038         default:
1039                 if (r->arp_ha.sa_family != dev->type)
1040                         return -EINVAL;
1041                 break;
1042         }
1043
1044         neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1045         err = PTR_ERR(neigh);
1046         if (!IS_ERR(neigh)) {
1047                 unsigned int state = NUD_STALE;
1048                 if (r->arp_flags & ATF_PERM)
1049                         state = NUD_PERMANENT;
1050                 err = neigh_update(neigh, (r->arp_flags & ATF_COM) ?
1051                                    r->arp_ha.sa_data : NULL, state,
1052                                    NEIGH_UPDATE_F_OVERRIDE |
1053                                    NEIGH_UPDATE_F_ADMIN);
1054                 neigh_release(neigh);
1055         }
1056         return err;
1057 }
1058
1059 static unsigned int arp_state_to_flags(struct neighbour *neigh)
1060 {
1061         if (neigh->nud_state&NUD_PERMANENT)
1062                 return ATF_PERM | ATF_COM;
1063         else if (neigh->nud_state&NUD_VALID)
1064                 return ATF_COM;
1065         else
1066                 return 0;
1067 }
1068
1069 /*
1070  *      Get an ARP cache entry.
1071  */
1072
1073 static int arp_req_get(struct arpreq *r, struct net_device *dev)
1074 {
1075         __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1076         struct neighbour *neigh;
1077         int err = -ENXIO;
1078
1079         neigh = neigh_lookup(&arp_tbl, &ip, dev);
1080         if (neigh) {
1081                 if (!(neigh->nud_state & NUD_NOARP)) {
1082                         read_lock_bh(&neigh->lock);
1083                         memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1084                         r->arp_flags = arp_state_to_flags(neigh);
1085                         read_unlock_bh(&neigh->lock);
1086                         r->arp_ha.sa_family = dev->type;
1087                         strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1088                         err = 0;
1089                 }
1090                 neigh_release(neigh);
1091         }
1092         return err;
1093 }
1094
1095 static int arp_invalidate(struct net_device *dev, __be32 ip)
1096 {
1097         struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev);
1098         int err = -ENXIO;
1099
1100         if (neigh) {
1101                 if (neigh->nud_state & ~NUD_NOARP)
1102                         err = neigh_update(neigh, NULL, NUD_FAILED,
1103                                            NEIGH_UPDATE_F_OVERRIDE|
1104                                            NEIGH_UPDATE_F_ADMIN);
1105                 neigh_release(neigh);
1106         }
1107
1108         return err;
1109 }
1110
1111 static int arp_req_delete_public(struct net *net, struct arpreq *r,
1112                 struct net_device *dev)
1113 {
1114         __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1115         __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1116
1117         if (mask == htonl(0xFFFFFFFF))
1118                 return pneigh_delete(&arp_tbl, net, &ip, dev);
1119
1120         if (mask)
1121                 return -EINVAL;
1122
1123         return arp_req_set_proxy(net, dev, 0);
1124 }
1125
1126 static int arp_req_delete(struct net *net, struct arpreq *r,
1127                           struct net_device *dev)
1128 {
1129         __be32 ip;
1130
1131         if (r->arp_flags & ATF_PUBL)
1132                 return arp_req_delete_public(net, r, dev);
1133
1134         ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1135         if (!dev) {
1136                 struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0);
1137                 if (IS_ERR(rt))
1138                         return PTR_ERR(rt);
1139                 dev = rt->dst.dev;
1140                 ip_rt_put(rt);
1141                 if (!dev)
1142                         return -EINVAL;
1143         }
1144         return arp_invalidate(dev, ip);
1145 }
1146
1147 /*
1148  *      Handle an ARP layer I/O control request.
1149  */
1150
1151 int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg)
1152 {
1153         int err;
1154         struct arpreq r;
1155         struct net_device *dev = NULL;
1156
1157         switch (cmd) {
1158         case SIOCDARP:
1159         case SIOCSARP:
1160                 if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
1161                         return -EPERM;
1162         case SIOCGARP:
1163                 err = copy_from_user(&r, arg, sizeof(struct arpreq));
1164                 if (err)
1165                         return -EFAULT;
1166                 break;
1167         default:
1168                 return -EINVAL;
1169         }
1170
1171         if (r.arp_pa.sa_family != AF_INET)
1172                 return -EPFNOSUPPORT;
1173
1174         if (!(r.arp_flags & ATF_PUBL) &&
1175             (r.arp_flags & (ATF_NETMASK | ATF_DONTPUB)))
1176                 return -EINVAL;
1177         if (!(r.arp_flags & ATF_NETMASK))
1178                 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1179                                                            htonl(0xFFFFFFFFUL);
1180         rtnl_lock();
1181         if (r.arp_dev[0]) {
1182                 err = -ENODEV;
1183                 dev = __dev_get_by_name(net, r.arp_dev);
1184                 if (!dev)
1185                         goto out;
1186
1187                 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1188                 if (!r.arp_ha.sa_family)
1189                         r.arp_ha.sa_family = dev->type;
1190                 err = -EINVAL;
1191                 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1192                         goto out;
1193         } else if (cmd == SIOCGARP) {
1194                 err = -ENODEV;
1195                 goto out;
1196         }
1197
1198         switch (cmd) {
1199         case SIOCDARP:
1200                 err = arp_req_delete(net, &r, dev);
1201                 break;
1202         case SIOCSARP:
1203                 err = arp_req_set(net, &r, dev);
1204                 break;
1205         case SIOCGARP:
1206                 err = arp_req_get(&r, dev);
1207                 break;
1208         }
1209 out:
1210         rtnl_unlock();
1211         if (cmd == SIOCGARP && !err && copy_to_user(arg, &r, sizeof(r)))
1212                 err = -EFAULT;
1213         return err;
1214 }
1215
1216 static int arp_netdev_event(struct notifier_block *this, unsigned long event,
1217                             void *ptr)
1218 {
1219         struct net_device *dev = netdev_notifier_info_to_dev(ptr);
1220         struct netdev_notifier_change_info *change_info;
1221
1222         switch (event) {
1223         case NETDEV_CHANGEADDR:
1224                 neigh_changeaddr(&arp_tbl, dev);
1225                 rt_cache_flush(dev_net(dev));
1226                 break;
1227         case NETDEV_CHANGE:
1228                 change_info = ptr;
1229                 if (change_info->flags_changed & IFF_NOARP)
1230                         neigh_changeaddr(&arp_tbl, dev);
1231                 break;
1232         default:
1233                 break;
1234         }
1235
1236         return NOTIFY_DONE;
1237 }
1238
1239 static struct notifier_block arp_netdev_notifier = {
1240         .notifier_call = arp_netdev_event,
1241 };
1242
1243 /* Note, that it is not on notifier chain.
1244    It is necessary, that this routine was called after route cache will be
1245    flushed.
1246  */
1247 void arp_ifdown(struct net_device *dev)
1248 {
1249         neigh_ifdown(&arp_tbl, dev);
1250 }
1251
1252
1253 /*
1254  *      Called once on startup.
1255  */
1256
1257 static struct packet_type arp_packet_type __read_mostly = {
1258         .type = cpu_to_be16(ETH_P_ARP),
1259         .func = arp_rcv,
1260 };
1261
1262 static int arp_proc_init(void);
1263
1264 void __init arp_init(void)
1265 {
1266         neigh_table_init(NEIGH_ARP_TABLE, &arp_tbl);
1267
1268         dev_add_pack(&arp_packet_type);
1269         arp_proc_init();
1270 #ifdef CONFIG_SYSCTL
1271         neigh_sysctl_register(NULL, &arp_tbl.parms, NULL);
1272 #endif
1273         register_netdevice_notifier(&arp_netdev_notifier);
1274 }
1275
1276 #ifdef CONFIG_PROC_FS
1277 #if IS_ENABLED(CONFIG_AX25)
1278
1279 /* ------------------------------------------------------------------------ */
1280 /*
1281  *      ax25 -> ASCII conversion
1282  */
1283 static void ax2asc2(ax25_address *a, char *buf)
1284 {
1285         char c, *s;
1286         int n;
1287
1288         for (n = 0, s = buf; n < 6; n++) {
1289                 c = (a->ax25_call[n] >> 1) & 0x7F;
1290
1291                 if (c != ' ')
1292                         *s++ = c;
1293         }
1294
1295         *s++ = '-';
1296         n = (a->ax25_call[6] >> 1) & 0x0F;
1297         if (n > 9) {
1298                 *s++ = '1';
1299                 n -= 10;
1300         }
1301
1302         *s++ = n + '0';
1303         *s++ = '\0';
1304
1305         if (*buf == '\0' || *buf == '-') {
1306                 buf[0] = '*';
1307                 buf[1] = '\0';
1308         }
1309 }
1310 #endif /* CONFIG_AX25 */
1311
1312 #define HBUFFERLEN 30
1313
1314 static void arp_format_neigh_entry(struct seq_file *seq,
1315                                    struct neighbour *n)
1316 {
1317         char hbuffer[HBUFFERLEN];
1318         int k, j;
1319         char tbuf[16];
1320         struct net_device *dev = n->dev;
1321         int hatype = dev->type;
1322
1323         read_lock(&n->lock);
1324         /* Convert hardware address to XX:XX:XX:XX ... form. */
1325 #if IS_ENABLED(CONFIG_AX25)
1326         if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1327                 ax2asc2((ax25_address *)n->ha, hbuffer);
1328         else {
1329 #endif
1330         for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1331                 hbuffer[k++] = hex_asc_hi(n->ha[j]);
1332                 hbuffer[k++] = hex_asc_lo(n->ha[j]);
1333                 hbuffer[k++] = ':';
1334         }
1335         if (k != 0)
1336                 --k;
1337         hbuffer[k] = 0;
1338 #if IS_ENABLED(CONFIG_AX25)
1339         }
1340 #endif
1341         sprintf(tbuf, "%pI4", n->primary_key);
1342         seq_printf(seq, "%-16s 0x%-10x0x%-10x%-17s     *        %s\n",
1343                    tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1344         read_unlock(&n->lock);
1345 }
1346
1347 static void arp_format_pneigh_entry(struct seq_file *seq,
1348                                     struct pneigh_entry *n)
1349 {
1350         struct net_device *dev = n->dev;
1351         int hatype = dev ? dev->type : 0;
1352         char tbuf[16];
1353
1354         sprintf(tbuf, "%pI4", n->key);
1355         seq_printf(seq, "%-16s 0x%-10x0x%-10x%s     *        %s\n",
1356                    tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1357                    dev ? dev->name : "*");
1358 }
1359
1360 static int arp_seq_show(struct seq_file *seq, void *v)
1361 {
1362         if (v == SEQ_START_TOKEN) {
1363                 seq_puts(seq, "IP address       HW type     Flags       "
1364                               "HW address            Mask     Device\n");
1365         } else {
1366                 struct neigh_seq_state *state = seq->private;
1367
1368                 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1369                         arp_format_pneigh_entry(seq, v);
1370                 else
1371                         arp_format_neigh_entry(seq, v);
1372         }
1373
1374         return 0;
1375 }
1376
1377 static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1378 {
1379         /* Don't want to confuse "arp -a" w/ magic entries,
1380          * so we tell the generic iterator to skip NUD_NOARP.
1381          */
1382         return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1383 }
1384
1385 /* ------------------------------------------------------------------------ */
1386
1387 static const struct seq_operations arp_seq_ops = {
1388         .start  = arp_seq_start,
1389         .next   = neigh_seq_next,
1390         .stop   = neigh_seq_stop,
1391         .show   = arp_seq_show,
1392 };
1393
1394 static int arp_seq_open(struct inode *inode, struct file *file)
1395 {
1396         return seq_open_net(inode, file, &arp_seq_ops,
1397                             sizeof(struct neigh_seq_state));
1398 }
1399
1400 static const struct file_operations arp_seq_fops = {
1401         .owner          = THIS_MODULE,
1402         .open           = arp_seq_open,
1403         .read           = seq_read,
1404         .llseek         = seq_lseek,
1405         .release        = seq_release_net,
1406 };
1407
1408
1409 static int __net_init arp_net_init(struct net *net)
1410 {
1411         if (!proc_create("arp", S_IRUGO, net->proc_net, &arp_seq_fops))
1412                 return -ENOMEM;
1413         return 0;
1414 }
1415
1416 static void __net_exit arp_net_exit(struct net *net)
1417 {
1418         remove_proc_entry("arp", net->proc_net);
1419 }
1420
1421 static struct pernet_operations arp_net_ops = {
1422         .init = arp_net_init,
1423         .exit = arp_net_exit,
1424 };
1425
1426 static int __init arp_proc_init(void)
1427 {
1428         return register_pernet_subsys(&arp_net_ops);
1429 }
1430
1431 #else /* CONFIG_PROC_FS */
1432
1433 static int __init arp_proc_init(void)
1434 {
1435         return 0;
1436 }
1437
1438 #endif /* CONFIG_PROC_FS */