4 * Copyright (C) 2001-2002 Greg Kroah-Hartman (greg@kroah.com)
5 * Copyright (C) 2002 Gary Brubaker (xavyer@ix.netcom.com)
6 * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com)
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This driver allows a USB IrDA device to be used as a "dumb" serial device.
14 * This can be useful if you do not have access to a full IrDA stack on the
15 * other side of the connection. If you do have an IrDA stack on both devices,
16 * please use the usb-irda driver, as it contains the proper error checking and
17 * other goodness of a full IrDA stack.
19 * Portions of this driver were taken from drivers/net/irda/irda-usb.c, which
20 * was written by Roman Weissgaerber <weissg@vienna.at>, Dag Brattli
21 * <dag@brattli.net>, and Jean Tourrilhes <jt@hpl.hp.com>
23 * See Documentation/usb/usb-serial.txt for more information on using this
27 #include <linux/kernel.h>
28 #include <linux/errno.h>
29 #include <linux/init.h>
30 #include <linux/slab.h>
31 #include <linux/tty.h>
32 #include <linux/tty_driver.h>
33 #include <linux/tty_flip.h>
34 #include <linux/module.h>
35 #include <linux/spinlock.h>
36 #include <linux/uaccess.h>
37 #include <linux/usb.h>
38 #include <linux/usb/serial.h>
39 #include <linux/usb/irda.h>
41 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Johan Hovold <jhovold@gmail.com>"
42 #define DRIVER_DESC "USB IR Dongle driver"
44 /* if overridden by the user, then use their value for the size of the read and
46 static int buffer_size;
48 /* if overridden by the user, then use the specified number of XBOFs */
51 static int ir_startup (struct usb_serial *serial);
52 static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
53 const unsigned char *buf, int count);
54 static int ir_write_room(struct tty_struct *tty);
55 static void ir_write_bulk_callback(struct urb *urb);
56 static void ir_process_read_urb(struct urb *urb);
57 static void ir_set_termios(struct tty_struct *tty,
58 struct usb_serial_port *port, struct ktermios *old_termios);
60 /* Not that this lot means you can only have one per system */
65 static const struct usb_device_id ir_id_table[] = {
66 { USB_DEVICE(0x050f, 0x0180) }, /* KC Technology, KC-180 */
67 { USB_DEVICE(0x08e9, 0x0100) }, /* XTNDAccess */
68 { USB_DEVICE(0x09c4, 0x0011) }, /* ACTiSys ACT-IR2000U */
69 { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, USB_SUBCLASS_IRDA, 0) },
70 { } /* Terminating entry */
73 MODULE_DEVICE_TABLE(usb, ir_id_table);
75 static struct usb_serial_driver ir_device = {
80 .description = "IR Dongle",
81 .id_table = ir_id_table,
83 .set_termios = ir_set_termios,
86 .write_room = ir_write_room,
87 .write_bulk_callback = ir_write_bulk_callback,
88 .process_read_urb = ir_process_read_urb,
91 static struct usb_serial_driver * const serial_drivers[] = {
95 static inline void irda_usb_dump_class_desc(struct usb_serial *serial,
96 struct usb_irda_cs_descriptor *desc)
98 struct device *dev = &serial->dev->dev;
100 dev_dbg(dev, "bLength=%x\n", desc->bLength);
101 dev_dbg(dev, "bDescriptorType=%x\n", desc->bDescriptorType);
102 dev_dbg(dev, "bcdSpecRevision=%x\n", __le16_to_cpu(desc->bcdSpecRevision));
103 dev_dbg(dev, "bmDataSize=%x\n", desc->bmDataSize);
104 dev_dbg(dev, "bmWindowSize=%x\n", desc->bmWindowSize);
105 dev_dbg(dev, "bmMinTurnaroundTime=%d\n", desc->bmMinTurnaroundTime);
106 dev_dbg(dev, "wBaudRate=%x\n", __le16_to_cpu(desc->wBaudRate));
107 dev_dbg(dev, "bmAdditionalBOFs=%x\n", desc->bmAdditionalBOFs);
108 dev_dbg(dev, "bIrdaRateSniff=%x\n", desc->bIrdaRateSniff);
109 dev_dbg(dev, "bMaxUnicastList=%x\n", desc->bMaxUnicastList);
112 /*------------------------------------------------------------------*/
114 * Function irda_usb_find_class_desc(dev, ifnum)
116 * Returns instance of IrDA class descriptor, or NULL if not found
118 * The class descriptor is some extra info that IrDA USB devices will
119 * offer to us, describing their IrDA characteristics. We will use that in
120 * irda_usb_init_qos()
122 * Based on the same function in drivers/net/irda/irda-usb.c
124 static struct usb_irda_cs_descriptor *
125 irda_usb_find_class_desc(struct usb_serial *serial, unsigned int ifnum)
127 struct usb_device *dev = serial->dev;
128 struct usb_irda_cs_descriptor *desc;
131 desc = kzalloc(sizeof(*desc), GFP_KERNEL);
135 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
136 USB_REQ_CS_IRDA_GET_CLASS_DESC,
137 USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
138 0, ifnum, desc, sizeof(*desc), 1000);
140 dev_dbg(&serial->dev->dev, "%s - ret=%d\n", __func__, ret);
141 if (ret < sizeof(*desc)) {
142 dev_dbg(&serial->dev->dev,
143 "%s - class descriptor read %s (%d)\n", __func__,
144 (ret < 0) ? "failed" : "too short", ret);
147 if (desc->bDescriptorType != USB_DT_CS_IRDA) {
148 dev_dbg(&serial->dev->dev, "%s - bad class descriptor type\n",
153 irda_usb_dump_class_desc(serial, desc);
161 static u8 ir_xbof_change(u8 xbof)
165 /* reference irda-usb.c */
199 static int ir_startup(struct usb_serial *serial)
201 struct usb_irda_cs_descriptor *irda_desc;
203 if (serial->num_bulk_in < 1 || serial->num_bulk_out < 1)
206 irda_desc = irda_usb_find_class_desc(serial, 0);
208 dev_err(&serial->dev->dev,
209 "IRDA class descriptor not found, device not bound\n");
213 dev_dbg(&serial->dev->dev,
214 "%s - Baud rates supported:%s%s%s%s%s%s%s%s%s\n",
216 (irda_desc->wBaudRate & USB_IRDA_BR_2400) ? " 2400" : "",
217 (irda_desc->wBaudRate & USB_IRDA_BR_9600) ? " 9600" : "",
218 (irda_desc->wBaudRate & USB_IRDA_BR_19200) ? " 19200" : "",
219 (irda_desc->wBaudRate & USB_IRDA_BR_38400) ? " 38400" : "",
220 (irda_desc->wBaudRate & USB_IRDA_BR_57600) ? " 57600" : "",
221 (irda_desc->wBaudRate & USB_IRDA_BR_115200) ? " 115200" : "",
222 (irda_desc->wBaudRate & USB_IRDA_BR_576000) ? " 576000" : "",
223 (irda_desc->wBaudRate & USB_IRDA_BR_1152000) ? " 1152000" : "",
224 (irda_desc->wBaudRate & USB_IRDA_BR_4000000) ? " 4000000" : "");
226 switch (irda_desc->bmAdditionalBOFs) {
260 static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
261 const unsigned char *buf, int count)
263 struct urb *urb = NULL;
267 if (port->bulk_out_size == 0)
273 count = min(count, port->bulk_out_size - 1);
275 spin_lock_irqsave(&port->lock, flags);
276 if (__test_and_clear_bit(0, &port->write_urbs_free)) {
277 urb = port->write_urbs[0];
278 port->tx_bytes += count;
280 spin_unlock_irqrestore(&port->lock, flags);
286 * The first byte of the packet we send to the device contains an
287 * outbound header which indicates an additional number of BOFs and
288 * a baud rate change.
290 * See section 5.4.2.2 of the USB IrDA spec.
292 *(u8 *)urb->transfer_buffer = ir_xbof | ir_baud;
294 memcpy(urb->transfer_buffer + 1, buf, count);
296 urb->transfer_buffer_length = count + 1;
297 urb->transfer_flags = URB_ZERO_PACKET;
299 ret = usb_submit_urb(urb, GFP_ATOMIC);
301 dev_err(&port->dev, "failed to submit write urb: %d\n", ret);
303 spin_lock_irqsave(&port->lock, flags);
304 __set_bit(0, &port->write_urbs_free);
305 port->tx_bytes -= count;
306 spin_unlock_irqrestore(&port->lock, flags);
314 static void ir_write_bulk_callback(struct urb *urb)
316 struct usb_serial_port *port = urb->context;
317 int status = urb->status;
320 spin_lock_irqsave(&port->lock, flags);
321 __set_bit(0, &port->write_urbs_free);
322 port->tx_bytes -= urb->transfer_buffer_length - 1;
323 spin_unlock_irqrestore(&port->lock, flags);
331 dev_dbg(&port->dev, "write urb stopped: %d\n", status);
334 dev_err(&port->dev, "write urb stopped: %d\n", status);
337 dev_err(&port->dev, "nonzero write-urb status: %d\n", status);
341 usb_serial_port_softint(port);
344 static int ir_write_room(struct tty_struct *tty)
346 struct usb_serial_port *port = tty->driver_data;
349 if (port->bulk_out_size == 0)
352 if (test_bit(0, &port->write_urbs_free))
353 count = port->bulk_out_size - 1;
358 static void ir_process_read_urb(struct urb *urb)
360 struct usb_serial_port *port = urb->context;
361 unsigned char *data = urb->transfer_buffer;
363 if (!urb->actual_length)
366 * The first byte of the packet we get from the device
367 * contains a busy indicator and baud rate change.
368 * See section 5.4.1.2 of the USB IrDA spec.
371 ir_baud = *data & 0x0f;
373 if (urb->actual_length == 1)
376 tty_insert_flip_string(&port->port, data + 1, urb->actual_length - 1);
377 tty_flip_buffer_push(&port->port);
380 static void ir_set_termios_callback(struct urb *urb)
382 kfree(urb->transfer_buffer);
385 dev_dbg(&urb->dev->dev, "%s - non-zero urb status: %d\n",
386 __func__, urb->status);
389 static void ir_set_termios(struct tty_struct *tty,
390 struct usb_serial_port *port, struct ktermios *old_termios)
393 unsigned char *transfer_buffer;
398 baud = tty_get_baud_rate(tty);
401 * FIXME, we should compare the baud request against the
402 * capability stated in the IR header that we got in the
408 ir_baud = USB_IRDA_LS_2400;
411 ir_baud = USB_IRDA_LS_9600;
414 ir_baud = USB_IRDA_LS_19200;
417 ir_baud = USB_IRDA_LS_38400;
420 ir_baud = USB_IRDA_LS_57600;
423 ir_baud = USB_IRDA_LS_115200;
426 ir_baud = USB_IRDA_LS_576000;
429 ir_baud = USB_IRDA_LS_1152000;
432 ir_baud = USB_IRDA_LS_4000000;
435 ir_baud = USB_IRDA_LS_9600;
440 ir_xbof = ir_xbof_change(ir_add_bof);
442 ir_xbof = ir_xbof_change(xbof) ;
444 /* Only speed changes are supported */
445 tty_termios_copy_hw(&tty->termios, old_termios);
446 tty_encode_baud_rate(tty, baud, baud);
449 * send the baud change out on an "empty" data packet
451 urb = usb_alloc_urb(0, GFP_KERNEL);
455 transfer_buffer = kmalloc(1, GFP_KERNEL);
456 if (!transfer_buffer)
459 *transfer_buffer = ir_xbof | ir_baud;
464 usb_sndbulkpipe(port->serial->dev,
465 port->bulk_out_endpointAddress),
468 ir_set_termios_callback,
471 urb->transfer_flags = URB_ZERO_PACKET;
473 result = usb_submit_urb(urb, GFP_KERNEL);
475 dev_err(&port->dev, "%s - failed to submit urb: %d\n",
484 kfree(transfer_buffer);
489 static int __init ir_init(void)
492 ir_device.bulk_in_size = buffer_size;
493 ir_device.bulk_out_size = buffer_size;
496 return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ir_id_table);
499 static void __exit ir_exit(void)
501 usb_serial_deregister_drivers(serial_drivers);
505 module_init(ir_init);
506 module_exit(ir_exit);
508 MODULE_AUTHOR(DRIVER_AUTHOR);
509 MODULE_DESCRIPTION(DRIVER_DESC);
510 MODULE_LICENSE("GPL");
512 module_param(xbof, int, 0);
513 MODULE_PARM_DESC(xbof, "Force specific number of XBOFs");
514 module_param(buffer_size, int, 0);
515 MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers");