1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
5 * Copyright (C) 2012 Red Hat, Inc. All rights reserved.
6 * Author: Alex Williamson <alex.williamson@redhat.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
15 #include <linux/types.h>
16 #include <linux/ioctl.h>
18 #define VFIO_API_VERSION 0
21 /* Kernel & User level defines for VFIO IOCTLs. */
25 #define VFIO_TYPE1_IOMMU 1
26 #define VFIO_SPAPR_TCE_IOMMU 2
27 #define VFIO_TYPE1v2_IOMMU 3
29 * IOMMU enforces DMA cache coherence (ex. PCIe NoSnoop stripping). This
30 * capability is subject to change as groups are added or removed.
32 #define VFIO_DMA_CC_IOMMU 4
34 /* Check if EEH is supported */
38 #define VFIO_TYPE1_NESTING_IOMMU 6 /* Implies v2 */
40 #define VFIO_SPAPR_TCE_v2_IOMMU 7
43 * The No-IOMMU IOMMU offers no translation or isolation for devices and
44 * supports no ioctls outside of VFIO_CHECK_EXTENSION. Use of VFIO's No-IOMMU
45 * code will taint the host kernel and should be used with extreme caution.
47 #define VFIO_NOIOMMU_IOMMU 8
49 /* Supports VFIO_DMA_UNMAP_FLAG_ALL */
50 #define VFIO_UNMAP_ALL 9
53 * Supports the vaddr flag for DMA map and unmap. Not supported for mediated
54 * devices, so this capability is subject to change as groups are added or
57 #define VFIO_UPDATE_VADDR 10
60 * The IOCTL interface is designed for extensibility by embedding the
61 * structure length (argsz) and flags into structures passed between
62 * kernel and userspace. We therefore use the _IO() macro for these
63 * defines to avoid implicitly embedding a size into the ioctl request.
64 * As structure fields are added, argsz will increase to match and flag
65 * bits will be defined to indicate additional fields with valid data.
66 * It's *always* the caller's responsibility to indicate the size of
67 * the structure passed by setting argsz appropriately.
70 #define VFIO_TYPE (';')
74 * For extension of INFO ioctls, VFIO makes use of a capability chain
75 * designed after PCI/e capabilities. A flag bit indicates whether
76 * this capability chain is supported and a field defined in the fixed
77 * structure defines the offset of the first capability in the chain.
78 * This field is only valid when the corresponding bit in the flags
79 * bitmap is set. This offset field is relative to the start of the
80 * INFO buffer, as is the next field within each capability header.
81 * The id within the header is a shared address space per INFO ioctl,
82 * while the version field is specific to the capability id. The
83 * contents following the header are specific to the capability id.
85 struct vfio_info_cap_header {
86 __u16 id; /* Identifies capability */
87 __u16 version; /* Version specific to the capability ID */
88 __u32 next; /* Offset of next capability */
92 * Callers of INFO ioctls passing insufficiently sized buffers will see
93 * the capability chain flag bit set, a zero value for the first capability
94 * offset (if available within the provided argsz), and argsz will be
95 * updated to report the necessary buffer size. For compatibility, the
96 * INFO ioctl will not report error in this case, but the capability chain
97 * will not be available.
100 /* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
103 * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
105 * Report the version of the VFIO API. This allows us to bump the entire
106 * API version should we later need to add or change features in incompatible
108 * Return: VFIO_API_VERSION
109 * Availability: Always
111 #define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0)
114 * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
116 * Check whether an extension is supported.
117 * Return: 0 if not supported, 1 (or some other positive integer) if supported.
118 * Availability: Always
120 #define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1)
123 * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
125 * Set the iommu to the given type. The type must be supported by an
126 * iommu driver as verified by calling CHECK_EXTENSION using the same
127 * type. A group must be set to this file descriptor before this
128 * ioctl is available. The IOMMU interfaces enabled by this call are
129 * specific to the value set.
130 * Return: 0 on success, -errno on failure
131 * Availability: When VFIO group attached
133 #define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2)
135 /* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
138 * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
139 * struct vfio_group_status)
141 * Retrieve information about the group. Fills in provided
142 * struct vfio_group_info. Caller sets argsz.
143 * Return: 0 on succes, -errno on failure.
144 * Availability: Always
146 struct vfio_group_status {
149 #define VFIO_GROUP_FLAGS_VIABLE (1 << 0)
150 #define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1)
152 #define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3)
155 * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
157 * Set the container for the VFIO group to the open VFIO file
158 * descriptor provided. Groups may only belong to a single
159 * container. Containers may, at their discretion, support multiple
160 * groups. Only when a container is set are all of the interfaces
161 * of the VFIO file descriptor and the VFIO group file descriptor
162 * available to the user.
163 * Return: 0 on success, -errno on failure.
164 * Availability: Always
166 #define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4)
169 * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
171 * Remove the group from the attached container. This is the
172 * opposite of the SET_CONTAINER call and returns the group to
173 * an initial state. All device file descriptors must be released
174 * prior to calling this interface. When removing the last group
175 * from a container, the IOMMU will be disabled and all state lost,
176 * effectively also returning the VFIO file descriptor to an initial
178 * Return: 0 on success, -errno on failure.
179 * Availability: When attached to container
181 #define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5)
184 * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
186 * Return a new file descriptor for the device object described by
187 * the provided string. The string should match a device listed in
188 * the devices subdirectory of the IOMMU group sysfs entry. The
189 * group containing the device must already be added to this context.
190 * Return: new file descriptor on success, -errno on failure.
191 * Availability: When attached to container
193 #define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6)
195 /* --------------- IOCTLs for DEVICE file descriptors --------------- */
198 * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
199 * struct vfio_device_info)
201 * Retrieve information about the device. Fills in provided
202 * struct vfio_device_info. Caller sets argsz.
203 * Return: 0 on success, -errno on failure.
205 struct vfio_device_info {
208 #define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */
209 #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */
210 #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */
211 #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */
212 #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */
213 #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */
214 #define VFIO_DEVICE_FLAGS_FSL_MC (1 << 6) /* vfio-fsl-mc device */
215 #define VFIO_DEVICE_FLAGS_CAPS (1 << 7) /* Info supports caps */
216 __u32 num_regions; /* Max region index + 1 */
217 __u32 num_irqs; /* Max IRQ index + 1 */
218 __u32 cap_offset; /* Offset within info struct of first cap */
220 #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7)
223 * Vendor driver using Mediated device framework should provide device_api
224 * attribute in supported type attribute groups. Device API string should be one
225 * of the following corresponding to device flags in vfio_device_info structure.
228 #define VFIO_DEVICE_API_PCI_STRING "vfio-pci"
229 #define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform"
230 #define VFIO_DEVICE_API_AMBA_STRING "vfio-amba"
231 #define VFIO_DEVICE_API_CCW_STRING "vfio-ccw"
232 #define VFIO_DEVICE_API_AP_STRING "vfio-ap"
235 * The following capabilities are unique to s390 zPCI devices. Their contents
236 * are further-defined in vfio_zdev.h
238 #define VFIO_DEVICE_INFO_CAP_ZPCI_BASE 1
239 #define VFIO_DEVICE_INFO_CAP_ZPCI_GROUP 2
240 #define VFIO_DEVICE_INFO_CAP_ZPCI_UTIL 3
241 #define VFIO_DEVICE_INFO_CAP_ZPCI_PFIP 4
244 * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
245 * struct vfio_region_info)
247 * Retrieve information about a device region. Caller provides
248 * struct vfio_region_info with index value set. Caller sets argsz.
249 * Implementation of region mapping is bus driver specific. This is
250 * intended to describe MMIO, I/O port, as well as bus specific
251 * regions (ex. PCI config space). Zero sized regions may be used
252 * to describe unimplemented regions (ex. unimplemented PCI BARs).
253 * Return: 0 on success, -errno on failure.
255 struct vfio_region_info {
258 #define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */
259 #define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */
260 #define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */
261 #define VFIO_REGION_INFO_FLAG_CAPS (1 << 3) /* Info supports caps */
262 __u32 index; /* Region index */
263 __u32 cap_offset; /* Offset within info struct of first cap */
264 __u64 size; /* Region size (bytes) */
265 __u64 offset; /* Region offset from start of device fd */
267 #define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8)
270 * The sparse mmap capability allows finer granularity of specifying areas
271 * within a region with mmap support. When specified, the user should only
272 * mmap the offset ranges specified by the areas array. mmaps outside of the
273 * areas specified may fail (such as the range covering a PCI MSI-X table) or
274 * may result in improper device behavior.
276 * The structures below define version 1 of this capability.
278 #define VFIO_REGION_INFO_CAP_SPARSE_MMAP 1
280 struct vfio_region_sparse_mmap_area {
281 __u64 offset; /* Offset of mmap'able area within region */
282 __u64 size; /* Size of mmap'able area */
285 struct vfio_region_info_cap_sparse_mmap {
286 struct vfio_info_cap_header header;
289 struct vfio_region_sparse_mmap_area areas[];
293 * The device specific type capability allows regions unique to a specific
294 * device or class of devices to be exposed. This helps solve the problem for
295 * vfio bus drivers of defining which region indexes correspond to which region
296 * on the device, without needing to resort to static indexes, as done by
297 * vfio-pci. For instance, if we were to go back in time, we might remove
298 * VFIO_PCI_VGA_REGION_INDEX and let vfio-pci simply define that all indexes
299 * greater than or equal to VFIO_PCI_NUM_REGIONS are device specific and we'd
300 * make a "VGA" device specific type to describe the VGA access space. This
301 * means that non-VGA devices wouldn't need to waste this index, and thus the
302 * address space associated with it due to implementation of device file
303 * descriptor offsets in vfio-pci.
305 * The current implementation is now part of the user ABI, so we can't use this
306 * for VGA, but there are other upcoming use cases, such as opregions for Intel
307 * IGD devices and framebuffers for vGPU devices. We missed VGA, but we'll
308 * use this for future additions.
310 * The structure below defines version 1 of this capability.
312 #define VFIO_REGION_INFO_CAP_TYPE 2
314 struct vfio_region_info_cap_type {
315 struct vfio_info_cap_header header;
316 __u32 type; /* global per bus driver */
317 __u32 subtype; /* type specific */
321 * List of region types, global per bus driver.
322 * If you introduce a new type, please add it here.
325 /* PCI region type containing a PCI vendor part */
326 #define VFIO_REGION_TYPE_PCI_VENDOR_TYPE (1 << 31)
327 #define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff)
328 #define VFIO_REGION_TYPE_GFX (1)
329 #define VFIO_REGION_TYPE_CCW (2)
330 #define VFIO_REGION_TYPE_MIGRATION_DEPRECATED (3)
332 /* sub-types for VFIO_REGION_TYPE_PCI_* */
334 /* 8086 vendor PCI sub-types */
335 #define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1)
336 #define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG (2)
337 #define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3)
339 /* 10de vendor PCI sub-types */
341 * NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space.
343 * Deprecated, region no longer provided
345 #define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM (1)
347 /* 1014 vendor PCI sub-types */
349 * IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU
350 * to do TLB invalidation on a GPU.
352 * Deprecated, region no longer provided
354 #define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD (1)
356 /* sub-types for VFIO_REGION_TYPE_GFX */
357 #define VFIO_REGION_SUBTYPE_GFX_EDID (1)
360 * struct vfio_region_gfx_edid - EDID region layout.
362 * Set display link state and EDID blob.
364 * The EDID blob has monitor information such as brand, name, serial
365 * number, physical size, supported video modes and more.
367 * This special region allows userspace (typically qemu) set a virtual
368 * EDID for the virtual monitor, which allows a flexible display
371 * For the edid blob spec look here:
372 * https://en.wikipedia.org/wiki/Extended_Display_Identification_Data
374 * On linux systems you can find the EDID blob in sysfs:
375 * /sys/class/drm/${card}/${connector}/edid
377 * You can use the edid-decode ulility (comes with xorg-x11-utils) to
378 * decode the EDID blob.
380 * @edid_offset: location of the edid blob, relative to the
381 * start of the region (readonly).
382 * @edid_max_size: max size of the edid blob (readonly).
383 * @edid_size: actual edid size (read/write).
384 * @link_state: display link state (read/write).
385 * VFIO_DEVICE_GFX_LINK_STATE_UP: Monitor is turned on.
386 * VFIO_DEVICE_GFX_LINK_STATE_DOWN: Monitor is turned off.
387 * @max_xres: max display width (0 == no limitation, readonly).
388 * @max_yres: max display height (0 == no limitation, readonly).
390 * EDID update protocol:
391 * (1) set link-state to down.
392 * (2) update edid blob and size.
393 * (3) set link-state to up.
395 struct vfio_region_gfx_edid {
402 #define VFIO_DEVICE_GFX_LINK_STATE_UP 1
403 #define VFIO_DEVICE_GFX_LINK_STATE_DOWN 2
406 /* sub-types for VFIO_REGION_TYPE_CCW */
407 #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1)
408 #define VFIO_REGION_SUBTYPE_CCW_SCHIB (2)
409 #define VFIO_REGION_SUBTYPE_CCW_CRW (3)
411 /* sub-types for VFIO_REGION_TYPE_MIGRATION */
412 #define VFIO_REGION_SUBTYPE_MIGRATION_DEPRECATED (1)
414 struct vfio_device_migration_info {
415 __u32 device_state; /* VFIO device state */
416 #define VFIO_DEVICE_STATE_V1_STOP (0)
417 #define VFIO_DEVICE_STATE_V1_RUNNING (1 << 0)
418 #define VFIO_DEVICE_STATE_V1_SAVING (1 << 1)
419 #define VFIO_DEVICE_STATE_V1_RESUMING (1 << 2)
420 #define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_V1_RUNNING | \
421 VFIO_DEVICE_STATE_V1_SAVING | \
422 VFIO_DEVICE_STATE_V1_RESUMING)
424 #define VFIO_DEVICE_STATE_VALID(state) \
425 (state & VFIO_DEVICE_STATE_V1_RESUMING ? \
426 (state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_V1_RESUMING : 1)
428 #define VFIO_DEVICE_STATE_IS_ERROR(state) \
429 ((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_V1_SAVING | \
430 VFIO_DEVICE_STATE_V1_RESUMING))
432 #define VFIO_DEVICE_STATE_SET_ERROR(state) \
433 ((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_STATE_V1_SAVING | \
434 VFIO_DEVICE_STATE_V1_RESUMING)
443 * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
444 * which allows direct access to non-MSIX registers which happened to be within
445 * the same system page.
447 * Even though the userspace gets direct access to the MSIX data, the existing
448 * VFIO_DEVICE_SET_IRQS interface must still be used for MSIX configuration.
450 #define VFIO_REGION_INFO_CAP_MSIX_MAPPABLE 3
453 * Capability with compressed real address (aka SSA - small system address)
454 * where GPU RAM is mapped on a system bus. Used by a GPU for DMA routing
455 * and by the userspace to associate a NVLink bridge with a GPU.
457 * Deprecated, capability no longer provided
459 #define VFIO_REGION_INFO_CAP_NVLINK2_SSATGT 4
461 struct vfio_region_info_cap_nvlink2_ssatgt {
462 struct vfio_info_cap_header header;
467 * Capability with an NVLink link speed. The value is read by
468 * the NVlink2 bridge driver from the bridge's "ibm,nvlink-speed"
469 * property in the device tree. The value is fixed in the hardware
470 * and failing to provide the correct value results in the link
471 * not working with no indication from the driver why.
473 * Deprecated, capability no longer provided
475 #define VFIO_REGION_INFO_CAP_NVLINK2_LNKSPD 5
477 struct vfio_region_info_cap_nvlink2_lnkspd {
478 struct vfio_info_cap_header header;
484 * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
485 * struct vfio_irq_info)
487 * Retrieve information about a device IRQ. Caller provides
488 * struct vfio_irq_info with index value set. Caller sets argsz.
489 * Implementation of IRQ mapping is bus driver specific. Indexes
490 * using multiple IRQs are primarily intended to support MSI-like
491 * interrupt blocks. Zero count irq blocks may be used to describe
492 * unimplemented interrupt types.
494 * The EVENTFD flag indicates the interrupt index supports eventfd based
497 * The MASKABLE flags indicates the index supports MASK and UNMASK
498 * actions described below.
500 * AUTOMASKED indicates that after signaling, the interrupt line is
501 * automatically masked by VFIO and the user needs to unmask the line
502 * to receive new interrupts. This is primarily intended to distinguish
503 * level triggered interrupts.
505 * The NORESIZE flag indicates that the interrupt lines within the index
506 * are setup as a set and new subindexes cannot be enabled without first
507 * disabling the entire index. This is used for interrupts like PCI MSI
508 * and MSI-X where the driver may only use a subset of the available
509 * indexes, but VFIO needs to enable a specific number of vectors
510 * upfront. In the case of MSI-X, where the user can enable MSI-X and
511 * then add and unmask vectors, it's up to userspace to make the decision
512 * whether to allocate the maximum supported number of vectors or tear
513 * down setup and incrementally increase the vectors as each is enabled.
515 struct vfio_irq_info {
518 #define VFIO_IRQ_INFO_EVENTFD (1 << 0)
519 #define VFIO_IRQ_INFO_MASKABLE (1 << 1)
520 #define VFIO_IRQ_INFO_AUTOMASKED (1 << 2)
521 #define VFIO_IRQ_INFO_NORESIZE (1 << 3)
522 __u32 index; /* IRQ index */
523 __u32 count; /* Number of IRQs within this index */
525 #define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9)
528 * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
530 * Set signaling, masking, and unmasking of interrupts. Caller provides
531 * struct vfio_irq_set with all fields set. 'start' and 'count' indicate
532 * the range of subindexes being specified.
534 * The DATA flags specify the type of data provided. If DATA_NONE, the
535 * operation performs the specified action immediately on the specified
536 * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]:
537 * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
539 * DATA_BOOL allows sparse support for the same on arrays of interrupts.
540 * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
541 * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
544 * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
545 * A value of -1 can be used to either de-assign interrupts if already
546 * assigned or skip un-assigned interrupts. For example, to set an eventfd
547 * to be trigger for interrupts [0,0] and [0,2]:
548 * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
549 * data = {fd1, -1, fd2}
550 * If index [0,1] is previously set, two count = 1 ioctls calls would be
551 * required to set [0,0] and [0,2] without changing [0,1].
553 * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
554 * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
555 * from userspace (ie. simulate hardware triggering).
557 * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
558 * enables the interrupt index for the device. Individual subindex interrupts
559 * can be disabled using the -1 value for DATA_EVENTFD or the index can be
560 * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
562 * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
563 * ACTION_TRIGGER specifies kernel->user signaling.
565 struct vfio_irq_set {
568 #define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */
569 #define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */
570 #define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */
571 #define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */
572 #define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */
573 #define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */
579 #define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10)
581 #define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \
582 VFIO_IRQ_SET_DATA_BOOL | \
583 VFIO_IRQ_SET_DATA_EVENTFD)
584 #define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \
585 VFIO_IRQ_SET_ACTION_UNMASK | \
586 VFIO_IRQ_SET_ACTION_TRIGGER)
588 * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
592 #define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11)
595 * The VFIO-PCI bus driver makes use of the following fixed region and
596 * IRQ index mapping. Unimplemented regions return a size of zero.
597 * Unimplemented IRQ types return a count of zero.
601 VFIO_PCI_BAR0_REGION_INDEX,
602 VFIO_PCI_BAR1_REGION_INDEX,
603 VFIO_PCI_BAR2_REGION_INDEX,
604 VFIO_PCI_BAR3_REGION_INDEX,
605 VFIO_PCI_BAR4_REGION_INDEX,
606 VFIO_PCI_BAR5_REGION_INDEX,
607 VFIO_PCI_ROM_REGION_INDEX,
608 VFIO_PCI_CONFIG_REGION_INDEX,
610 * Expose VGA regions defined for PCI base class 03, subclass 00.
611 * This includes I/O port ranges 0x3b0 to 0x3bb and 0x3c0 to 0x3df
612 * as well as the MMIO range 0xa0000 to 0xbffff. Each implemented
613 * range is found at it's identity mapped offset from the region
614 * offset, for example 0x3b0 is region_info.offset + 0x3b0. Areas
615 * between described ranges are unimplemented.
617 VFIO_PCI_VGA_REGION_INDEX,
618 VFIO_PCI_NUM_REGIONS = 9 /* Fixed user ABI, region indexes >=9 use */
619 /* device specific cap to define content. */
623 VFIO_PCI_INTX_IRQ_INDEX,
624 VFIO_PCI_MSI_IRQ_INDEX,
625 VFIO_PCI_MSIX_IRQ_INDEX,
626 VFIO_PCI_ERR_IRQ_INDEX,
627 VFIO_PCI_REQ_IRQ_INDEX,
632 * The vfio-ccw bus driver makes use of the following fixed region and
633 * IRQ index mapping. Unimplemented regions return a size of zero.
634 * Unimplemented IRQ types return a count of zero.
638 VFIO_CCW_CONFIG_REGION_INDEX,
643 VFIO_CCW_IO_IRQ_INDEX,
644 VFIO_CCW_CRW_IRQ_INDEX,
645 VFIO_CCW_REQ_IRQ_INDEX,
650 * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12,
651 * struct vfio_pci_hot_reset_info)
653 * Return: 0 on success, -errno on failure:
654 * -enospc = insufficient buffer, -enodev = unsupported for device.
656 struct vfio_pci_dependent_device {
660 __u8 devfn; /* Use PCI_SLOT/PCI_FUNC */
663 struct vfio_pci_hot_reset_info {
667 struct vfio_pci_dependent_device devices[];
670 #define VFIO_DEVICE_GET_PCI_HOT_RESET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
673 * VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13,
674 * struct vfio_pci_hot_reset)
676 * Return: 0 on success, -errno on failure.
678 struct vfio_pci_hot_reset {
685 #define VFIO_DEVICE_PCI_HOT_RESET _IO(VFIO_TYPE, VFIO_BASE + 13)
688 * VFIO_DEVICE_QUERY_GFX_PLANE - _IOW(VFIO_TYPE, VFIO_BASE + 14,
689 * struct vfio_device_query_gfx_plane)
691 * Set the drm_plane_type and flags, then retrieve the gfx plane info.
694 * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_DMABUF are set
695 * to ask if the mdev supports dma-buf. 0 on support, -EINVAL on no
696 * support for dma-buf.
697 * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_REGION are set
698 * to ask if the mdev supports region. 0 on support, -EINVAL on no
699 * support for region.
700 * - VFIO_GFX_PLANE_TYPE_DMABUF or VFIO_GFX_PLANE_TYPE_REGION is set
701 * with each call to query the plane info.
702 * - Others are invalid and return -EINVAL.
705 * 1. Plane could be disabled by guest. In that case, success will be
706 * returned with zero-initialized drm_format, size, width and height
708 * 2. x_hot/y_hot is set to 0xFFFFFFFF if no hotspot information available
710 * Return: 0 on success, -errno on other failure.
712 struct vfio_device_gfx_plane_info {
715 #define VFIO_GFX_PLANE_TYPE_PROBE (1 << 0)
716 #define VFIO_GFX_PLANE_TYPE_DMABUF (1 << 1)
717 #define VFIO_GFX_PLANE_TYPE_REGION (1 << 2)
719 __u32 drm_plane_type; /* type of plane: DRM_PLANE_TYPE_* */
721 __u32 drm_format; /* drm format of plane */
722 __u64 drm_format_mod; /* tiled mode */
723 __u32 width; /* width of plane */
724 __u32 height; /* height of plane */
725 __u32 stride; /* stride of plane */
726 __u32 size; /* size of plane in bytes, align on page*/
727 __u32 x_pos; /* horizontal position of cursor plane */
728 __u32 y_pos; /* vertical position of cursor plane*/
729 __u32 x_hot; /* horizontal position of cursor hotspot */
730 __u32 y_hot; /* vertical position of cursor hotspot */
732 __u32 region_index; /* region index */
733 __u32 dmabuf_id; /* dma-buf id */
737 #define VFIO_DEVICE_QUERY_GFX_PLANE _IO(VFIO_TYPE, VFIO_BASE + 14)
740 * VFIO_DEVICE_GET_GFX_DMABUF - _IOW(VFIO_TYPE, VFIO_BASE + 15, __u32)
742 * Return a new dma-buf file descriptor for an exposed guest framebuffer
743 * described by the provided dmabuf_id. The dmabuf_id is returned from VFIO_
744 * DEVICE_QUERY_GFX_PLANE as a token of the exposed guest framebuffer.
747 #define VFIO_DEVICE_GET_GFX_DMABUF _IO(VFIO_TYPE, VFIO_BASE + 15)
750 * VFIO_DEVICE_IOEVENTFD - _IOW(VFIO_TYPE, VFIO_BASE + 16,
751 * struct vfio_device_ioeventfd)
753 * Perform a write to the device at the specified device fd offset, with
754 * the specified data and width when the provided eventfd is triggered.
755 * vfio bus drivers may not support this for all regions, for all widths,
756 * or at all. vfio-pci currently only enables support for BAR regions,
757 * excluding the MSI-X vector table.
759 * Return: 0 on success, -errno on failure.
761 struct vfio_device_ioeventfd {
764 #define VFIO_DEVICE_IOEVENTFD_8 (1 << 0) /* 1-byte write */
765 #define VFIO_DEVICE_IOEVENTFD_16 (1 << 1) /* 2-byte write */
766 #define VFIO_DEVICE_IOEVENTFD_32 (1 << 2) /* 4-byte write */
767 #define VFIO_DEVICE_IOEVENTFD_64 (1 << 3) /* 8-byte write */
768 #define VFIO_DEVICE_IOEVENTFD_SIZE_MASK (0xf)
769 __u64 offset; /* device fd offset of write */
770 __u64 data; /* data to be written */
771 __s32 fd; /* -1 for de-assignment */
774 #define VFIO_DEVICE_IOEVENTFD _IO(VFIO_TYPE, VFIO_BASE + 16)
777 * VFIO_DEVICE_FEATURE - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
778 * struct vfio_device_feature)
780 * Get, set, or probe feature data of the device. The feature is selected
781 * using the FEATURE_MASK portion of the flags field. Support for a feature
782 * can be probed by setting both the FEATURE_MASK and PROBE bits. A probe
783 * may optionally include the GET and/or SET bits to determine read vs write
784 * access of the feature respectively. Probing a feature will return success
785 * if the feature is supported and all of the optionally indicated GET/SET
786 * methods are supported. The format of the data portion of the structure is
787 * specific to the given feature. The data portion is not required for
788 * probing. GET and SET are mutually exclusive, except for use with PROBE.
790 * Return 0 on success, -errno on failure.
792 struct vfio_device_feature {
795 #define VFIO_DEVICE_FEATURE_MASK (0xffff) /* 16-bit feature index */
796 #define VFIO_DEVICE_FEATURE_GET (1 << 16) /* Get feature into data[] */
797 #define VFIO_DEVICE_FEATURE_SET (1 << 17) /* Set feature from data[] */
798 #define VFIO_DEVICE_FEATURE_PROBE (1 << 18) /* Probe feature support */
802 #define VFIO_DEVICE_FEATURE _IO(VFIO_TYPE, VFIO_BASE + 17)
805 * Provide support for setting a PCI VF Token, which is used as a shared
806 * secret between PF and VF drivers. This feature may only be set on a
807 * PCI SR-IOV PF when SR-IOV is enabled on the PF and there are no existing
808 * open VFs. Data provided when setting this feature is a 16-byte array
809 * (__u8 b[16]), representing a UUID.
811 #define VFIO_DEVICE_FEATURE_PCI_VF_TOKEN (0)
814 * Indicates the device can support the migration API through
815 * VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE. If this GET succeeds, the RUNNING and
816 * ERROR states are always supported. Support for additional states is
817 * indicated via the flags field; at least VFIO_MIGRATION_STOP_COPY must be
820 * VFIO_MIGRATION_STOP_COPY means that STOP, STOP_COPY and
821 * RESUMING are supported.
823 * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P means that RUNNING_P2P
824 * is supported in addition to the STOP_COPY states.
826 * Other combinations of flags have behavior to be defined in the future.
828 struct vfio_device_feature_migration {
830 #define VFIO_MIGRATION_STOP_COPY (1 << 0)
831 #define VFIO_MIGRATION_P2P (1 << 1)
833 #define VFIO_DEVICE_FEATURE_MIGRATION 1
836 * Upon VFIO_DEVICE_FEATURE_SET, execute a migration state change on the VFIO
837 * device. The new state is supplied in device_state, see enum
838 * vfio_device_mig_state for details
840 * The kernel migration driver must fully transition the device to the new state
841 * value before the operation returns to the user.
843 * The kernel migration driver must not generate asynchronous device state
844 * transitions outside of manipulation by the user or the VFIO_DEVICE_RESET
845 * ioctl as described above.
847 * If this function fails then current device_state may be the original
848 * operating state or some other state along the combination transition path.
849 * The user can then decide if it should execute a VFIO_DEVICE_RESET, attempt
850 * to return to the original state, or attempt to return to some other state
851 * such as RUNNING or STOP.
853 * If the new_state starts a new data transfer session then the FD associated
854 * with that session is returned in data_fd. The user is responsible to close
855 * this FD when it is finished. The user must consider the migration data stream
856 * carried over the FD to be opaque and must preserve the byte order of the
857 * stream. The user is not required to preserve buffer segmentation when writing
858 * the data stream during the RESUMING operation.
860 * Upon VFIO_DEVICE_FEATURE_GET, get the current migration state of the VFIO
861 * device, data_fd will be -1.
863 struct vfio_device_feature_mig_state {
864 __u32 device_state; /* From enum vfio_device_mig_state */
867 #define VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE 2
870 * The device migration Finite State Machine is described by the enum
871 * vfio_device_mig_state. Some of the FSM arcs will create a migration data
872 * transfer session by returning a FD, in this case the migration data will
873 * flow over the FD using read() and write() as discussed below.
875 * There are 5 states to support VFIO_MIGRATION_STOP_COPY:
876 * RUNNING - The device is running normally
877 * STOP - The device does not change the internal or external state
878 * STOP_COPY - The device internal state can be read out
879 * RESUMING - The device is stopped and is loading a new internal state
880 * ERROR - The device has failed and must be reset
882 * And 1 optional state to support VFIO_MIGRATION_P2P:
883 * RUNNING_P2P - RUNNING, except the device cannot do peer to peer DMA
885 * The FSM takes actions on the arcs between FSM states. The driver implements
886 * the following behavior for the FSM arcs:
888 * RUNNING_P2P -> STOP
890 * While in STOP the device must stop the operation of the device. The device
891 * must not generate interrupts, DMA, or any other change to external state.
892 * It must not change its internal state. When stopped the device and kernel
893 * migration driver must accept and respond to interaction to support external
894 * subsystems in the STOP state, for example PCI MSI-X and PCI config space.
895 * Failure by the user to restrict device access while in STOP must not result
896 * in error conditions outside the user context (ex. host system faults).
898 * The STOP_COPY arc will terminate a data transfer session.
901 * Leaving RESUMING terminates a data transfer session and indicates the
902 * device should complete processing of the data delivered by write(). The
903 * kernel migration driver should complete the incorporation of data written
904 * to the data transfer FD into the device internal state and perform
905 * final validity and consistency checking of the new device state. If the
906 * user provided data is found to be incomplete, inconsistent, or otherwise
907 * invalid, the migration driver must fail the SET_STATE ioctl and
908 * optionally go to the ERROR state as described below.
910 * While in STOP the device has the same behavior as other STOP states
913 * To abort a RESUMING session the device must be reset.
915 * RUNNING_P2P -> RUNNING
916 * While in RUNNING the device is fully operational, the device may generate
917 * interrupts, DMA, respond to MMIO, all vfio device regions are functional,
918 * and the device may advance its internal state.
920 * RUNNING -> RUNNING_P2P
921 * STOP -> RUNNING_P2P
922 * While in RUNNING_P2P the device is partially running in the P2P quiescent
923 * state defined below.
926 * This arc begin the process of saving the device state and will return a
929 * While in the STOP_COPY state the device has the same behavior as STOP
930 * with the addition that the data transfers session continues to stream the
931 * migration state. End of stream on the FD indicates the entire device
932 * state has been transferred.
934 * The user should take steps to restrict access to vfio device regions while
935 * the device is in STOP_COPY or risk corruption of the device migration data
939 * Entering the RESUMING state starts a process of restoring the device state
940 * and will return a new data_fd. The data stream fed into the data_fd should
941 * be taken from the data transfer output of a single FD during saving from
942 * a compatible device. The migration driver may alter/reset the internal
943 * device state for this arc if required to prepare the device to receive the
947 * ERROR cannot be specified as a device state, however any transition request
948 * can be failed with an errno return and may then move the device_state into
949 * ERROR. In this case the device was unable to execute the requested arc and
950 * was also unable to restore the device to any valid device_state.
951 * To recover from ERROR VFIO_DEVICE_RESET must be used to return the
952 * device_state back to RUNNING.
954 * The optional peer to peer (P2P) quiescent state is intended to be a quiescent
955 * state for the device for the purposes of managing multiple devices within a
956 * user context where peer-to-peer DMA between devices may be active. The
957 * RUNNING_P2P states must prevent the device from initiating
958 * any new P2P DMA transactions. If the device can identify P2P transactions
959 * then it can stop only P2P DMA, otherwise it must stop all DMA. The migration
960 * driver must complete any such outstanding operations prior to completing the
961 * FSM arc into a P2P state. For the purpose of specification the states
962 * behave as though the device was fully running if not supported. Like while in
963 * STOP or STOP_COPY the user must not touch the device, otherwise the state
966 * The remaining possible transitions are interpreted as combinations of the
967 * above FSM arcs. As there are multiple paths through the FSM arcs the path
968 * should be selected based on the following rules:
969 * - Select the shortest path.
970 * Refer to vfio_mig_get_next_state() for the result of the algorithm.
972 * The automatic transit through the FSM arcs that make up the combination
973 * transition is invisible to the user. When working with combination arcs the
974 * user may see any step along the path in the device_state if SET_STATE
975 * fails. When handling these types of errors users should anticipate future
976 * revisions of this protocol using new states and those states becoming
977 * visible in this case.
979 * The optional states cannot be used with SET_STATE if the device does not
980 * support them. The user can discover if these states are supported by using
981 * VFIO_DEVICE_FEATURE_MIGRATION. By using combination transitions the user can
982 * avoid knowing about these optional states if the kernel driver supports them.
984 enum vfio_device_mig_state {
985 VFIO_DEVICE_STATE_ERROR = 0,
986 VFIO_DEVICE_STATE_STOP = 1,
987 VFIO_DEVICE_STATE_RUNNING = 2,
988 VFIO_DEVICE_STATE_STOP_COPY = 3,
989 VFIO_DEVICE_STATE_RESUMING = 4,
990 VFIO_DEVICE_STATE_RUNNING_P2P = 5,
994 * Upon VFIO_DEVICE_FEATURE_SET, allow the device to be moved into a low power
995 * state with the platform-based power management. Device use of lower power
996 * states depends on factors managed by the runtime power management core,
997 * including system level support and coordinating support among dependent
998 * devices. Enabling device low power entry does not guarantee lower power
999 * usage by the device, nor is a mechanism provided through this feature to
1000 * know the current power state of the device. If any device access happens
1001 * (either from the host or through the vfio uAPI) when the device is in the
1002 * low power state, then the host will move the device out of the low power
1003 * state as necessary prior to the access. Once the access is completed, the
1004 * device may re-enter the low power state. For single shot low power support
1005 * with wake-up notification, see
1006 * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP below. Access to mmap'd
1007 * device regions is disabled on LOW_POWER_ENTRY and may only be resumed after
1008 * calling LOW_POWER_EXIT.
1010 #define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY 3
1013 * This device feature has the same behavior as
1014 * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY with the exception that the user
1015 * provides an eventfd for wake-up notification. When the device moves out of
1016 * the low power state for the wake-up, the host will not allow the device to
1017 * re-enter a low power state without a subsequent user call to one of the low
1018 * power entry device feature IOCTLs. Access to mmap'd device regions is
1019 * disabled on LOW_POWER_ENTRY_WITH_WAKEUP and may only be resumed after the
1020 * low power exit. The low power exit can happen either through LOW_POWER_EXIT
1021 * or through any other access (where the wake-up notification has been
1022 * generated). The access to mmap'd device regions will not trigger low power
1025 * The notification through the provided eventfd will be generated only when
1026 * the device has entered and is resumed from a low power state after
1027 * calling this device feature IOCTL. A device that has not entered low power
1028 * state, as managed through the runtime power management core, will not
1029 * generate a notification through the provided eventfd on access. Calling the
1030 * LOW_POWER_EXIT feature is optional in the case where notification has been
1031 * signaled on the provided eventfd that a resume from low power has occurred.
1033 struct vfio_device_low_power_entry_with_wakeup {
1034 __s32 wakeup_eventfd;
1038 #define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP 4
1041 * Upon VFIO_DEVICE_FEATURE_SET, disallow use of device low power states as
1042 * previously enabled via VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY or
1043 * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP device features.
1044 * This device feature IOCTL may itself generate a wakeup eventfd notification
1045 * in the latter case if the device had previously entered a low power state.
1047 #define VFIO_DEVICE_FEATURE_LOW_POWER_EXIT 5
1050 * Upon VFIO_DEVICE_FEATURE_SET start/stop device DMA logging.
1051 * VFIO_DEVICE_FEATURE_PROBE can be used to detect if the device supports
1054 * DMA logging allows a device to internally record what DMAs the device is
1055 * initiating and report them back to userspace. It is part of the VFIO
1056 * migration infrastructure that allows implementing dirty page tracking
1057 * during the pre copy phase of live migration. Only DMA WRITEs are logged,
1058 * and this API is not connected to VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE.
1060 * When DMA logging is started a range of IOVAs to monitor is provided and the
1061 * device can optimize its logging to cover only the IOVA range given. Each
1062 * DMA that the device initiates inside the range will be logged by the device
1063 * for later retrieval.
1065 * page_size is an input that hints what tracking granularity the device
1066 * should try to achieve. If the device cannot do the hinted page size then
1067 * it's the driver choice which page size to pick based on its support.
1068 * On output the device will return the page size it selected.
1070 * ranges is a pointer to an array of
1071 * struct vfio_device_feature_dma_logging_range.
1073 * The core kernel code guarantees to support by minimum num_ranges that fit
1074 * into a single kernel page. User space can try higher values but should give
1075 * up if the above can't be achieved as of some driver limitations.
1077 * A single call to start device DMA logging can be issued and a matching stop
1078 * should follow at the end. Another start is not allowed in the meantime.
1080 struct vfio_device_feature_dma_logging_control {
1081 __aligned_u64 page_size;
1084 __aligned_u64 ranges;
1087 struct vfio_device_feature_dma_logging_range {
1089 __aligned_u64 length;
1092 #define VFIO_DEVICE_FEATURE_DMA_LOGGING_START 6
1095 * Upon VFIO_DEVICE_FEATURE_SET stop device DMA logging that was started
1096 * by VFIO_DEVICE_FEATURE_DMA_LOGGING_START
1098 #define VFIO_DEVICE_FEATURE_DMA_LOGGING_STOP 7
1101 * Upon VFIO_DEVICE_FEATURE_GET read back and clear the device DMA log
1103 * Query the device's DMA log for written pages within the given IOVA range.
1104 * During querying the log is cleared for the IOVA range.
1106 * bitmap is a pointer to an array of u64s that will hold the output bitmap
1107 * with 1 bit reporting a page_size unit of IOVA. The mapping of IOVA to bits
1109 * bitmap[(addr - iova)/page_size] & (1ULL << (addr % 64))
1111 * The input page_size can be any power of two value and does not have to
1112 * match the value given to VFIO_DEVICE_FEATURE_DMA_LOGGING_START. The driver
1113 * will format its internal logging to match the reporting page size, possibly
1114 * by replicating bits if the internal page size is lower than requested.
1116 * The LOGGING_REPORT will only set bits in the bitmap and never clear or
1117 * perform any initialization of the user provided bitmap.
1119 * If any error is returned userspace should assume that the dirty log is
1120 * corrupted. Error recovery is to consider all memory dirty and try to
1121 * restart the dirty tracking, or to abort/restart the whole migration.
1123 * If DMA logging is not enabled, an error will be returned.
1126 struct vfio_device_feature_dma_logging_report {
1128 __aligned_u64 length;
1129 __aligned_u64 page_size;
1130 __aligned_u64 bitmap;
1133 #define VFIO_DEVICE_FEATURE_DMA_LOGGING_REPORT 8
1135 /* -------- API for Type1 VFIO IOMMU -------- */
1138 * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
1140 * Retrieve information about the IOMMU object. Fills in provided
1141 * struct vfio_iommu_info. Caller sets argsz.
1143 * XXX Should we do these by CHECK_EXTENSION too?
1145 struct vfio_iommu_type1_info {
1148 #define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */
1149 #define VFIO_IOMMU_INFO_CAPS (1 << 1) /* Info supports caps */
1150 __u64 iova_pgsizes; /* Bitmap of supported page sizes */
1151 __u32 cap_offset; /* Offset within info struct of first cap */
1155 * The IOVA capability allows to report the valid IOVA range(s)
1156 * excluding any non-relaxable reserved regions exposed by
1157 * devices attached to the container. Any DMA map attempt
1158 * outside the valid iova range will return error.
1160 * The structures below define version 1 of this capability.
1162 #define VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE 1
1164 struct vfio_iova_range {
1169 struct vfio_iommu_type1_info_cap_iova_range {
1170 struct vfio_info_cap_header header;
1173 struct vfio_iova_range iova_ranges[];
1177 * The migration capability allows to report supported features for migration.
1179 * The structures below define version 1 of this capability.
1181 * The existence of this capability indicates that IOMMU kernel driver supports
1182 * dirty page logging.
1184 * pgsize_bitmap: Kernel driver returns bitmap of supported page sizes for dirty
1186 * max_dirty_bitmap_size: Kernel driver returns maximum supported dirty bitmap
1187 * size in bytes that can be used by user applications when getting the dirty
1190 #define VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION 2
1192 struct vfio_iommu_type1_info_cap_migration {
1193 struct vfio_info_cap_header header;
1195 __u64 pgsize_bitmap;
1196 __u64 max_dirty_bitmap_size; /* in bytes */
1200 * The DMA available capability allows to report the current number of
1201 * simultaneously outstanding DMA mappings that are allowed.
1203 * The structure below defines version 1 of this capability.
1205 * avail: specifies the current number of outstanding DMA mappings allowed.
1207 #define VFIO_IOMMU_TYPE1_INFO_DMA_AVAIL 3
1209 struct vfio_iommu_type1_info_dma_avail {
1210 struct vfio_info_cap_header header;
1214 #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
1217 * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
1219 * Map process virtual addresses to IO virtual addresses using the
1220 * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
1222 * If flags & VFIO_DMA_MAP_FLAG_VADDR, update the base vaddr for iova. The vaddr
1223 * must have previously been invalidated with VFIO_DMA_UNMAP_FLAG_VADDR. To
1224 * maintain memory consistency within the user application, the updated vaddr
1225 * must address the same memory object as originally mapped. Failure to do so
1226 * will result in user memory corruption and/or device misbehavior. iova and
1227 * size must match those in the original MAP_DMA call. Protection is not
1228 * changed, and the READ & WRITE flags must be 0.
1230 struct vfio_iommu_type1_dma_map {
1233 #define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */
1234 #define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */
1235 #define VFIO_DMA_MAP_FLAG_VADDR (1 << 2)
1236 __u64 vaddr; /* Process virtual address */
1237 __u64 iova; /* IO virtual address */
1238 __u64 size; /* Size of mapping (bytes) */
1241 #define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
1243 struct vfio_bitmap {
1244 __u64 pgsize; /* page size for bitmap in bytes */
1245 __u64 size; /* in bytes */
1246 __u64 __user *data; /* one bit per page */
1250 * VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14,
1251 * struct vfio_dma_unmap)
1253 * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
1254 * Caller sets argsz. The actual unmapped size is returned in the size
1255 * field. No guarantee is made to the user that arbitrary unmaps of iova
1256 * or size different from those used in the original mapping call will
1259 * VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap
1260 * before unmapping IO virtual addresses. When this flag is set, the user must
1261 * provide a struct vfio_bitmap in data[]. User must provide zero-allocated
1262 * memory via vfio_bitmap.data and its size in the vfio_bitmap.size field.
1263 * A bit in the bitmap represents one page, of user provided page size in
1264 * vfio_bitmap.pgsize field, consecutively starting from iova offset. Bit set
1265 * indicates that the page at that offset from iova is dirty. A Bitmap of the
1266 * pages in the range of unmapped size is returned in the user-provided
1269 * If flags & VFIO_DMA_UNMAP_FLAG_ALL, unmap all addresses. iova and size
1270 * must be 0. This cannot be combined with the get-dirty-bitmap flag.
1272 * If flags & VFIO_DMA_UNMAP_FLAG_VADDR, do not unmap, but invalidate host
1273 * virtual addresses in the iova range. DMA to already-mapped pages continues.
1274 * Groups may not be added to the container while any addresses are invalid.
1275 * This cannot be combined with the get-dirty-bitmap flag.
1277 struct vfio_iommu_type1_dma_unmap {
1280 #define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0)
1281 #define VFIO_DMA_UNMAP_FLAG_ALL (1 << 1)
1282 #define VFIO_DMA_UNMAP_FLAG_VADDR (1 << 2)
1283 __u64 iova; /* IO virtual address */
1284 __u64 size; /* Size of mapping (bytes) */
1288 #define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
1291 * IOCTLs to enable/disable IOMMU container usage.
1292 * No parameters are supported.
1294 #define VFIO_IOMMU_ENABLE _IO(VFIO_TYPE, VFIO_BASE + 15)
1295 #define VFIO_IOMMU_DISABLE _IO(VFIO_TYPE, VFIO_BASE + 16)
1298 * VFIO_IOMMU_DIRTY_PAGES - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
1299 * struct vfio_iommu_type1_dirty_bitmap)
1300 * IOCTL is used for dirty pages logging.
1301 * Caller should set flag depending on which operation to perform, details as
1304 * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_START flag set, instructs
1305 * the IOMMU driver to log pages that are dirtied or potentially dirtied by
1306 * the device; designed to be used when a migration is in progress. Dirty pages
1307 * are logged until logging is disabled by user application by calling the IOCTL
1308 * with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag.
1310 * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag set, instructs
1311 * the IOMMU driver to stop logging dirtied pages.
1313 * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP flag set
1314 * returns the dirty pages bitmap for IOMMU container for a given IOVA range.
1315 * The user must specify the IOVA range and the pgsize through the structure
1316 * vfio_iommu_type1_dirty_bitmap_get in the data[] portion. This interface
1317 * supports getting a bitmap of the smallest supported pgsize only and can be
1318 * modified in future to get a bitmap of any specified supported pgsize. The
1319 * user must provide a zeroed memory area for the bitmap memory and specify its
1320 * size in bitmap.size. One bit is used to represent one page consecutively
1321 * starting from iova offset. The user should provide page size in bitmap.pgsize
1322 * field. A bit set in the bitmap indicates that the page at that offset from
1323 * iova is dirty. The caller must set argsz to a value including the size of
1324 * structure vfio_iommu_type1_dirty_bitmap_get, but excluding the size of the
1325 * actual bitmap. If dirty pages logging is not enabled, an error will be
1328 * Only one of the flags _START, _STOP and _GET may be specified at a time.
1331 struct vfio_iommu_type1_dirty_bitmap {
1334 #define VFIO_IOMMU_DIRTY_PAGES_FLAG_START (1 << 0)
1335 #define VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP (1 << 1)
1336 #define VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP (1 << 2)
1340 struct vfio_iommu_type1_dirty_bitmap_get {
1341 __u64 iova; /* IO virtual address */
1342 __u64 size; /* Size of iova range */
1343 struct vfio_bitmap bitmap;
1346 #define VFIO_IOMMU_DIRTY_PAGES _IO(VFIO_TYPE, VFIO_BASE + 17)
1348 /* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */
1351 * The SPAPR TCE DDW info struct provides the information about
1352 * the details of Dynamic DMA window capability.
1354 * @pgsizes contains a page size bitmask, 4K/64K/16M are supported.
1355 * @max_dynamic_windows_supported tells the maximum number of windows
1356 * which the platform can create.
1357 * @levels tells the maximum number of levels in multi-level IOMMU tables;
1358 * this allows splitting a table into smaller chunks which reduces
1359 * the amount of physically contiguous memory required for the table.
1361 struct vfio_iommu_spapr_tce_ddw_info {
1362 __u64 pgsizes; /* Bitmap of supported page sizes */
1363 __u32 max_dynamic_windows_supported;
1368 * The SPAPR TCE info struct provides the information about the PCI bus
1369 * address ranges available for DMA, these values are programmed into
1370 * the hardware so the guest has to know that information.
1372 * The DMA 32 bit window start is an absolute PCI bus address.
1373 * The IOVA address passed via map/unmap ioctls are absolute PCI bus
1374 * addresses too so the window works as a filter rather than an offset
1375 * for IOVA addresses.
1378 * - VFIO_IOMMU_SPAPR_INFO_DDW: informs the userspace that dynamic DMA windows
1379 * (DDW) support is present. @ddw is only supported when DDW is present.
1381 struct vfio_iommu_spapr_tce_info {
1384 #define VFIO_IOMMU_SPAPR_INFO_DDW (1 << 0) /* DDW supported */
1385 __u32 dma32_window_start; /* 32 bit window start (bytes) */
1386 __u32 dma32_window_size; /* 32 bit window size (bytes) */
1387 struct vfio_iommu_spapr_tce_ddw_info ddw;
1390 #define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
1393 * EEH PE operation struct provides ways to:
1394 * - enable/disable EEH functionality;
1395 * - unfreeze IO/DMA for frozen PE;
1399 * - inject EEH error.
1401 struct vfio_eeh_pe_err {
1408 struct vfio_eeh_pe_op {
1413 struct vfio_eeh_pe_err err;
1417 #define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */
1418 #define VFIO_EEH_PE_ENABLE 1 /* Enable EEH functionality */
1419 #define VFIO_EEH_PE_UNFREEZE_IO 2 /* Enable IO for frozen PE */
1420 #define VFIO_EEH_PE_UNFREEZE_DMA 3 /* Enable DMA for frozen PE */
1421 #define VFIO_EEH_PE_GET_STATE 4 /* PE state retrieval */
1422 #define VFIO_EEH_PE_STATE_NORMAL 0 /* PE in functional state */
1423 #define VFIO_EEH_PE_STATE_RESET 1 /* PE reset in progress */
1424 #define VFIO_EEH_PE_STATE_STOPPED 2 /* Stopped DMA and IO */
1425 #define VFIO_EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA only */
1426 #define VFIO_EEH_PE_STATE_UNAVAIL 5 /* State unavailable */
1427 #define VFIO_EEH_PE_RESET_DEACTIVATE 5 /* Deassert PE reset */
1428 #define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */
1429 #define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */
1430 #define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */
1431 #define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error */
1433 #define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21)
1436 * VFIO_IOMMU_SPAPR_REGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 17, struct vfio_iommu_spapr_register_memory)
1438 * Registers user space memory where DMA is allowed. It pins
1439 * user pages and does the locked memory accounting so
1440 * subsequent VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA calls
1443 struct vfio_iommu_spapr_register_memory {
1446 __u64 vaddr; /* Process virtual address */
1447 __u64 size; /* Size of mapping (bytes) */
1449 #define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17)
1452 * VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 18, struct vfio_iommu_spapr_register_memory)
1454 * Unregisters user space memory registered with
1455 * VFIO_IOMMU_SPAPR_REGISTER_MEMORY.
1456 * Uses vfio_iommu_spapr_register_memory for parameters.
1458 #define VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 18)
1461 * VFIO_IOMMU_SPAPR_TCE_CREATE - _IOWR(VFIO_TYPE, VFIO_BASE + 19, struct vfio_iommu_spapr_tce_create)
1463 * Creates an additional TCE table and programs it (sets a new DMA window)
1464 * to every IOMMU group in the container. It receives page shift, window
1465 * size and number of levels in the TCE table being created.
1467 * It allocates and returns an offset on a PCI bus of the new DMA window.
1469 struct vfio_iommu_spapr_tce_create {
1481 #define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19)
1484 * VFIO_IOMMU_SPAPR_TCE_REMOVE - _IOW(VFIO_TYPE, VFIO_BASE + 20, struct vfio_iommu_spapr_tce_remove)
1486 * Unprograms a TCE table from all groups in the container and destroys it.
1487 * It receives a PCI bus offset as a window id.
1489 struct vfio_iommu_spapr_tce_remove {
1495 #define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20)
1497 /* ***************************************************************** */
1499 #endif /* _UAPIVFIO_H */