1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 /* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of version 2 of the GNU General Public
6 * License as published by the Free Software Foundation.
8 #ifndef _UAPI__LINUX_BPF_H__
9 #define _UAPI__LINUX_BPF_H__
11 #include <linux/types.h>
12 #include <linux/bpf_common.h>
14 /* Extended instruction set based on top of classic BPF */
16 /* instruction classes */
17 #define BPF_JMP32 0x06 /* jmp mode in word width */
18 #define BPF_ALU64 0x07 /* alu mode in double word width */
21 #define BPF_DW 0x18 /* double word (64-bit) */
22 #define BPF_ATOMIC 0xc0 /* atomic memory ops - op type in immediate */
23 #define BPF_XADD 0xc0 /* exclusive add - legacy name */
26 #define BPF_MOV 0xb0 /* mov reg to reg */
27 #define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */
29 /* change endianness of a register */
30 #define BPF_END 0xd0 /* flags for endianness conversion: */
31 #define BPF_TO_LE 0x00 /* convert to little-endian */
32 #define BPF_TO_BE 0x08 /* convert to big-endian */
33 #define BPF_FROM_LE BPF_TO_LE
34 #define BPF_FROM_BE BPF_TO_BE
37 #define BPF_JNE 0x50 /* jump != */
38 #define BPF_JLT 0xa0 /* LT is unsigned, '<' */
39 #define BPF_JLE 0xb0 /* LE is unsigned, '<=' */
40 #define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */
41 #define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */
42 #define BPF_JSLT 0xc0 /* SLT is signed, '<' */
43 #define BPF_JSLE 0xd0 /* SLE is signed, '<=' */
44 #define BPF_CALL 0x80 /* function call */
45 #define BPF_EXIT 0x90 /* function return */
47 /* atomic op type fields (stored in immediate) */
48 #define BPF_FETCH 0x01 /* not an opcode on its own, used to build others */
49 #define BPF_XCHG (0xe0 | BPF_FETCH) /* atomic exchange */
50 #define BPF_CMPXCHG (0xf0 | BPF_FETCH) /* atomic compare-and-write */
52 /* Register numbers */
68 /* BPF has 10 general purpose 64-bit registers and stack frame. */
69 #define MAX_BPF_REG __MAX_BPF_REG
72 __u8 code; /* opcode */
73 __u8 dst_reg:4; /* dest register */
74 __u8 src_reg:4; /* source register */
75 __s16 off; /* signed offset */
76 __s32 imm; /* signed immediate constant */
79 /* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */
80 struct bpf_lpm_trie_key {
81 __u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */
82 __u8 data[0]; /* Arbitrary size */
85 struct bpf_cgroup_storage_key {
86 __u64 cgroup_inode_id; /* cgroup inode id */
87 __u32 attach_type; /* program attach type (enum bpf_attach_type) */
90 enum bpf_cgroup_iter_order {
91 BPF_CGROUP_ITER_ORDER_UNSPEC = 0,
92 BPF_CGROUP_ITER_SELF_ONLY, /* process only a single object. */
93 BPF_CGROUP_ITER_DESCENDANTS_PRE, /* walk descendants in pre-order. */
94 BPF_CGROUP_ITER_DESCENDANTS_POST, /* walk descendants in post-order. */
95 BPF_CGROUP_ITER_ANCESTORS_UP, /* walk ancestors upward. */
98 union bpf_iter_link_info {
103 enum bpf_cgroup_iter_order order;
105 /* At most one of cgroup_fd and cgroup_id can be non-zero. If
106 * both are zero, the walk starts from the default cgroup v2
107 * root. For walking v1 hierarchy, one should always explicitly
113 /* Parameters of task iterators. */
121 /* BPF syscall commands, see bpf(2) man-page for more details. */
123 * DOC: eBPF Syscall Preamble
125 * The operation to be performed by the **bpf**\ () system call is determined
126 * by the *cmd* argument. Each operation takes an accompanying argument,
127 * provided via *attr*, which is a pointer to a union of type *bpf_attr* (see
128 * below). The size argument is the size of the union pointed to by *attr*.
131 * DOC: eBPF Syscall Commands
135 * Create a map and return a file descriptor that refers to the
136 * map. The close-on-exec file descriptor flag (see **fcntl**\ (2))
137 * is automatically enabled for the new file descriptor.
139 * Applying **close**\ (2) to the file descriptor returned by
140 * **BPF_MAP_CREATE** will delete the map (but see NOTES).
143 * A new file descriptor (a nonnegative integer), or -1 if an
144 * error occurred (in which case, *errno* is set appropriately).
146 * BPF_MAP_LOOKUP_ELEM
148 * Look up an element with a given *key* in the map referred to
149 * by the file descriptor *map_fd*.
151 * The *flags* argument may be specified as one of the
155 * Look up the value of a spin-locked map without
156 * returning the lock. This must be specified if the
157 * elements contain a spinlock.
160 * Returns zero on success. On error, -1 is returned and *errno*
161 * is set appropriately.
163 * BPF_MAP_UPDATE_ELEM
165 * Create or update an element (key/value pair) in a specified map.
167 * The *flags* argument should be specified as one of the
171 * Create a new element or update an existing element.
173 * Create a new element only if it did not exist.
175 * Update an existing element.
177 * Update a spin_lock-ed map element.
180 * Returns zero on success. On error, -1 is returned and *errno*
181 * is set appropriately.
183 * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**,
184 * **E2BIG**, **EEXIST**, or **ENOENT**.
187 * The number of elements in the map reached the
188 * *max_entries* limit specified at map creation time.
190 * If *flags* specifies **BPF_NOEXIST** and the element
191 * with *key* already exists in the map.
193 * If *flags* specifies **BPF_EXIST** and the element with
194 * *key* does not exist in the map.
196 * BPF_MAP_DELETE_ELEM
198 * Look up and delete an element by key in a specified map.
201 * Returns zero on success. On error, -1 is returned and *errno*
202 * is set appropriately.
204 * BPF_MAP_GET_NEXT_KEY
206 * Look up an element by key in a specified map and return the key
207 * of the next element. Can be used to iterate over all elements
211 * Returns zero on success. On error, -1 is returned and *errno*
212 * is set appropriately.
214 * The following cases can be used to iterate over all elements of
217 * * If *key* is not found, the operation returns zero and sets
218 * the *next_key* pointer to the key of the first element.
219 * * If *key* is found, the operation returns zero and sets the
220 * *next_key* pointer to the key of the next element.
221 * * If *key* is the last element, returns -1 and *errno* is set
224 * May set *errno* to **ENOMEM**, **EFAULT**, **EPERM**, or
225 * **EINVAL** on error.
229 * Verify and load an eBPF program, returning a new file
230 * descriptor associated with the program.
232 * Applying **close**\ (2) to the file descriptor returned by
233 * **BPF_PROG_LOAD** will unload the eBPF program (but see NOTES).
235 * The close-on-exec file descriptor flag (see **fcntl**\ (2)) is
236 * automatically enabled for the new file descriptor.
239 * A new file descriptor (a nonnegative integer), or -1 if an
240 * error occurred (in which case, *errno* is set appropriately).
244 * Pin an eBPF program or map referred by the specified *bpf_fd*
245 * to the provided *pathname* on the filesystem.
247 * The *pathname* argument must not contain a dot (".").
249 * On success, *pathname* retains a reference to the eBPF object,
250 * preventing deallocation of the object when the original
251 * *bpf_fd* is closed. This allow the eBPF object to live beyond
252 * **close**\ (\ *bpf_fd*\ ), and hence the lifetime of the parent
255 * Applying **unlink**\ (2) or similar calls to the *pathname*
256 * unpins the object from the filesystem, removing the reference.
257 * If no other file descriptors or filesystem nodes refer to the
258 * same object, it will be deallocated (see NOTES).
260 * The filesystem type for the parent directory of *pathname* must
261 * be **BPF_FS_MAGIC**.
264 * Returns zero on success. On error, -1 is returned and *errno*
265 * is set appropriately.
269 * Open a file descriptor for the eBPF object pinned to the
270 * specified *pathname*.
273 * A new file descriptor (a nonnegative integer), or -1 if an
274 * error occurred (in which case, *errno* is set appropriately).
278 * Attach an eBPF program to a *target_fd* at the specified
279 * *attach_type* hook.
281 * The *attach_type* specifies the eBPF attachment point to
282 * attach the program to, and must be one of *bpf_attach_type*
285 * The *attach_bpf_fd* must be a valid file descriptor for a
286 * loaded eBPF program of a cgroup, flow dissector, LIRC, sockmap
287 * or sock_ops type corresponding to the specified *attach_type*.
289 * The *target_fd* must be a valid file descriptor for a kernel
290 * object which depends on the attach type of *attach_bpf_fd*:
292 * **BPF_PROG_TYPE_CGROUP_DEVICE**,
293 * **BPF_PROG_TYPE_CGROUP_SKB**,
294 * **BPF_PROG_TYPE_CGROUP_SOCK**,
295 * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**,
296 * **BPF_PROG_TYPE_CGROUP_SOCKOPT**,
297 * **BPF_PROG_TYPE_CGROUP_SYSCTL**,
298 * **BPF_PROG_TYPE_SOCK_OPS**
300 * Control Group v2 hierarchy with the eBPF controller
301 * enabled. Requires the kernel to be compiled with
302 * **CONFIG_CGROUP_BPF**.
304 * **BPF_PROG_TYPE_FLOW_DISSECTOR**
306 * Network namespace (eg /proc/self/ns/net).
308 * **BPF_PROG_TYPE_LIRC_MODE2**
310 * LIRC device path (eg /dev/lircN). Requires the kernel
311 * to be compiled with **CONFIG_BPF_LIRC_MODE2**.
313 * **BPF_PROG_TYPE_SK_SKB**,
314 * **BPF_PROG_TYPE_SK_MSG**
316 * eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**).
319 * Returns zero on success. On error, -1 is returned and *errno*
320 * is set appropriately.
324 * Detach the eBPF program associated with the *target_fd* at the
325 * hook specified by *attach_type*. The program must have been
326 * previously attached using **BPF_PROG_ATTACH**.
329 * Returns zero on success. On error, -1 is returned and *errno*
330 * is set appropriately.
334 * Run the eBPF program associated with the *prog_fd* a *repeat*
335 * number of times against a provided program context *ctx_in* and
336 * data *data_in*, and return the modified program context
337 * *ctx_out*, *data_out* (for example, packet data), result of the
338 * execution *retval*, and *duration* of the test run.
340 * The sizes of the buffers provided as input and output
341 * parameters *ctx_in*, *ctx_out*, *data_in*, and *data_out* must
342 * be provided in the corresponding variables *ctx_size_in*,
343 * *ctx_size_out*, *data_size_in*, and/or *data_size_out*. If any
344 * of these parameters are not provided (ie set to NULL), the
345 * corresponding size field must be zero.
347 * Some program types have particular requirements:
349 * **BPF_PROG_TYPE_SK_LOOKUP**
350 * *data_in* and *data_out* must be NULL.
352 * **BPF_PROG_TYPE_RAW_TRACEPOINT**,
353 * **BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE**
355 * *ctx_out*, *data_in* and *data_out* must be NULL.
356 * *repeat* must be zero.
358 * BPF_PROG_RUN is an alias for BPF_PROG_TEST_RUN.
361 * Returns zero on success. On error, -1 is returned and *errno*
362 * is set appropriately.
365 * Either *data_size_out* or *ctx_size_out* is too small.
367 * This command is not supported by the program type of
368 * the program referred to by *prog_fd*.
370 * BPF_PROG_GET_NEXT_ID
372 * Fetch the next eBPF program currently loaded into the kernel.
374 * Looks for the eBPF program with an id greater than *start_id*
375 * and updates *next_id* on success. If no other eBPF programs
376 * remain with ids higher than *start_id*, returns -1 and sets
377 * *errno* to **ENOENT**.
380 * Returns zero on success. On error, or when no id remains, -1
381 * is returned and *errno* is set appropriately.
383 * BPF_MAP_GET_NEXT_ID
385 * Fetch the next eBPF map currently loaded into the kernel.
387 * Looks for the eBPF map with an id greater than *start_id*
388 * and updates *next_id* on success. If no other eBPF maps
389 * remain with ids higher than *start_id*, returns -1 and sets
390 * *errno* to **ENOENT**.
393 * Returns zero on success. On error, or when no id remains, -1
394 * is returned and *errno* is set appropriately.
396 * BPF_PROG_GET_FD_BY_ID
398 * Open a file descriptor for the eBPF program corresponding to
402 * A new file descriptor (a nonnegative integer), or -1 if an
403 * error occurred (in which case, *errno* is set appropriately).
405 * BPF_MAP_GET_FD_BY_ID
407 * Open a file descriptor for the eBPF map corresponding to
411 * A new file descriptor (a nonnegative integer), or -1 if an
412 * error occurred (in which case, *errno* is set appropriately).
414 * BPF_OBJ_GET_INFO_BY_FD
416 * Obtain information about the eBPF object corresponding to
419 * Populates up to *info_len* bytes of *info*, which will be in
420 * one of the following formats depending on the eBPF object type
423 * * **struct bpf_prog_info**
424 * * **struct bpf_map_info**
425 * * **struct bpf_btf_info**
426 * * **struct bpf_link_info**
429 * Returns zero on success. On error, -1 is returned and *errno*
430 * is set appropriately.
434 * Obtain information about eBPF programs associated with the
435 * specified *attach_type* hook.
437 * The *target_fd* must be a valid file descriptor for a kernel
438 * object which depends on the attach type of *attach_bpf_fd*:
440 * **BPF_PROG_TYPE_CGROUP_DEVICE**,
441 * **BPF_PROG_TYPE_CGROUP_SKB**,
442 * **BPF_PROG_TYPE_CGROUP_SOCK**,
443 * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**,
444 * **BPF_PROG_TYPE_CGROUP_SOCKOPT**,
445 * **BPF_PROG_TYPE_CGROUP_SYSCTL**,
446 * **BPF_PROG_TYPE_SOCK_OPS**
448 * Control Group v2 hierarchy with the eBPF controller
449 * enabled. Requires the kernel to be compiled with
450 * **CONFIG_CGROUP_BPF**.
452 * **BPF_PROG_TYPE_FLOW_DISSECTOR**
454 * Network namespace (eg /proc/self/ns/net).
456 * **BPF_PROG_TYPE_LIRC_MODE2**
458 * LIRC device path (eg /dev/lircN). Requires the kernel
459 * to be compiled with **CONFIG_BPF_LIRC_MODE2**.
461 * **BPF_PROG_QUERY** always fetches the number of programs
462 * attached and the *attach_flags* which were used to attach those
463 * programs. Additionally, if *prog_ids* is nonzero and the number
464 * of attached programs is less than *prog_cnt*, populates
465 * *prog_ids* with the eBPF program ids of the programs attached
468 * The following flags may alter the result:
470 * **BPF_F_QUERY_EFFECTIVE**
471 * Only return information regarding programs which are
472 * currently effective at the specified *target_fd*.
475 * Returns zero on success. On error, -1 is returned and *errno*
476 * is set appropriately.
478 * BPF_RAW_TRACEPOINT_OPEN
480 * Attach an eBPF program to a tracepoint *name* to access kernel
481 * internal arguments of the tracepoint in their raw form.
483 * The *prog_fd* must be a valid file descriptor associated with
484 * a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**.
486 * No ABI guarantees are made about the content of tracepoint
487 * arguments exposed to the corresponding eBPF program.
489 * Applying **close**\ (2) to the file descriptor returned by
490 * **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES).
493 * A new file descriptor (a nonnegative integer), or -1 if an
494 * error occurred (in which case, *errno* is set appropriately).
498 * Verify and load BPF Type Format (BTF) metadata into the kernel,
499 * returning a new file descriptor associated with the metadata.
500 * BTF is described in more detail at
501 * https://www.kernel.org/doc/html/latest/bpf/btf.html.
503 * The *btf* parameter must point to valid memory providing
504 * *btf_size* bytes of BTF binary metadata.
506 * The returned file descriptor can be passed to other **bpf**\ ()
507 * subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to
508 * associate the BTF with those objects.
510 * Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional
511 * parameters to specify a *btf_log_buf*, *btf_log_size* and
512 * *btf_log_level* which allow the kernel to return freeform log
513 * output regarding the BTF verification process.
516 * A new file descriptor (a nonnegative integer), or -1 if an
517 * error occurred (in which case, *errno* is set appropriately).
519 * BPF_BTF_GET_FD_BY_ID
521 * Open a file descriptor for the BPF Type Format (BTF)
522 * corresponding to *btf_id*.
525 * A new file descriptor (a nonnegative integer), or -1 if an
526 * error occurred (in which case, *errno* is set appropriately).
530 * Obtain information about eBPF programs associated with the
531 * target process identified by *pid* and *fd*.
533 * If the *pid* and *fd* are associated with a tracepoint, kprobe
534 * or uprobe perf event, then the *prog_id* and *fd_type* will
535 * be populated with the eBPF program id and file descriptor type
536 * of type **bpf_task_fd_type**. If associated with a kprobe or
537 * uprobe, the *probe_offset* and *probe_addr* will also be
538 * populated. Optionally, if *buf* is provided, then up to
539 * *buf_len* bytes of *buf* will be populated with the name of
540 * the tracepoint, kprobe or uprobe.
542 * The resulting *prog_id* may be introspected in deeper detail
543 * using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**.
546 * Returns zero on success. On error, -1 is returned and *errno*
547 * is set appropriately.
549 * BPF_MAP_LOOKUP_AND_DELETE_ELEM
551 * Look up an element with the given *key* in the map referred to
552 * by the file descriptor *fd*, and if found, delete the element.
554 * For **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map
555 * types, the *flags* argument needs to be set to 0, but for other
556 * map types, it may be specified as:
559 * Look up and delete the value of a spin-locked map
560 * without returning the lock. This must be specified if
561 * the elements contain a spinlock.
563 * The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types
564 * implement this command as a "pop" operation, deleting the top
565 * element rather than one corresponding to *key*.
566 * The *key* and *key_len* parameters should be zeroed when
567 * issuing this operation for these map types.
569 * This command is only valid for the following map types:
570 * * **BPF_MAP_TYPE_QUEUE**
571 * * **BPF_MAP_TYPE_STACK**
572 * * **BPF_MAP_TYPE_HASH**
573 * * **BPF_MAP_TYPE_PERCPU_HASH**
574 * * **BPF_MAP_TYPE_LRU_HASH**
575 * * **BPF_MAP_TYPE_LRU_PERCPU_HASH**
578 * Returns zero on success. On error, -1 is returned and *errno*
579 * is set appropriately.
583 * Freeze the permissions of the specified map.
585 * Write permissions may be frozen by passing zero *flags*.
586 * Upon success, no future syscall invocations may alter the
587 * map state of *map_fd*. Write operations from eBPF programs
588 * are still possible for a frozen map.
590 * Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**.
593 * Returns zero on success. On error, -1 is returned and *errno*
594 * is set appropriately.
596 * BPF_BTF_GET_NEXT_ID
598 * Fetch the next BPF Type Format (BTF) object currently loaded
601 * Looks for the BTF object with an id greater than *start_id*
602 * and updates *next_id* on success. If no other BTF objects
603 * remain with ids higher than *start_id*, returns -1 and sets
604 * *errno* to **ENOENT**.
607 * Returns zero on success. On error, or when no id remains, -1
608 * is returned and *errno* is set appropriately.
610 * BPF_MAP_LOOKUP_BATCH
612 * Iterate and fetch multiple elements in a map.
614 * Two opaque values are used to manage batch operations,
615 * *in_batch* and *out_batch*. Initially, *in_batch* must be set
616 * to NULL to begin the batched operation. After each subsequent
617 * **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant
618 * *out_batch* as the *in_batch* for the next operation to
619 * continue iteration from the current point.
621 * The *keys* and *values* are output parameters which must point
622 * to memory large enough to hold *count* items based on the key
623 * and value size of the map *map_fd*. The *keys* buffer must be
624 * of *key_size* * *count*. The *values* buffer must be of
625 * *value_size* * *count*.
627 * The *elem_flags* argument may be specified as one of the
631 * Look up the value of a spin-locked map without
632 * returning the lock. This must be specified if the
633 * elements contain a spinlock.
635 * On success, *count* elements from the map are copied into the
636 * user buffer, with the keys copied into *keys* and the values
637 * copied into the corresponding indices in *values*.
639 * If an error is returned and *errno* is not **EFAULT**, *count*
640 * is set to the number of successfully processed elements.
643 * Returns zero on success. On error, -1 is returned and *errno*
644 * is set appropriately.
646 * May set *errno* to **ENOSPC** to indicate that *keys* or
647 * *values* is too small to dump an entire bucket during
648 * iteration of a hash-based map type.
650 * BPF_MAP_LOOKUP_AND_DELETE_BATCH
652 * Iterate and delete all elements in a map.
654 * This operation has the same behavior as
655 * **BPF_MAP_LOOKUP_BATCH** with two exceptions:
657 * * Every element that is successfully returned is also deleted
658 * from the map. This is at least *count* elements. Note that
659 * *count* is both an input and an output parameter.
660 * * Upon returning with *errno* set to **EFAULT**, up to
661 * *count* elements may be deleted without returning the keys
662 * and values of the deleted elements.
665 * Returns zero on success. On error, -1 is returned and *errno*
666 * is set appropriately.
668 * BPF_MAP_UPDATE_BATCH
670 * Update multiple elements in a map by *key*.
672 * The *keys* and *values* are input parameters which must point
673 * to memory large enough to hold *count* items based on the key
674 * and value size of the map *map_fd*. The *keys* buffer must be
675 * of *key_size* * *count*. The *values* buffer must be of
676 * *value_size* * *count*.
678 * Each element specified in *keys* is sequentially updated to the
679 * value in the corresponding index in *values*. The *in_batch*
680 * and *out_batch* parameters are ignored and should be zeroed.
682 * The *elem_flags* argument should be specified as one of the
686 * Create new elements or update a existing elements.
688 * Create new elements only if they do not exist.
690 * Update existing elements.
692 * Update spin_lock-ed map elements. This must be
693 * specified if the map value contains a spinlock.
695 * On success, *count* elements from the map are updated.
697 * If an error is returned and *errno* is not **EFAULT**, *count*
698 * is set to the number of successfully processed elements.
701 * Returns zero on success. On error, -1 is returned and *errno*
702 * is set appropriately.
704 * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, or
705 * **E2BIG**. **E2BIG** indicates that the number of elements in
706 * the map reached the *max_entries* limit specified at map
709 * May set *errno* to one of the following error codes under
710 * specific circumstances:
713 * If *flags* specifies **BPF_NOEXIST** and the element
714 * with *key* already exists in the map.
716 * If *flags* specifies **BPF_EXIST** and the element with
717 * *key* does not exist in the map.
719 * BPF_MAP_DELETE_BATCH
721 * Delete multiple elements in a map by *key*.
723 * The *keys* parameter is an input parameter which must point
724 * to memory large enough to hold *count* items based on the key
725 * size of the map *map_fd*, that is, *key_size* * *count*.
727 * Each element specified in *keys* is sequentially deleted. The
728 * *in_batch*, *out_batch*, and *values* parameters are ignored
729 * and should be zeroed.
731 * The *elem_flags* argument may be specified as one of the
735 * Look up the value of a spin-locked map without
736 * returning the lock. This must be specified if the
737 * elements contain a spinlock.
739 * On success, *count* elements from the map are updated.
741 * If an error is returned and *errno* is not **EFAULT**, *count*
742 * is set to the number of successfully processed elements. If
743 * *errno* is **EFAULT**, up to *count* elements may be been
747 * Returns zero on success. On error, -1 is returned and *errno*
748 * is set appropriately.
752 * Attach an eBPF program to a *target_fd* at the specified
753 * *attach_type* hook and return a file descriptor handle for
757 * A new file descriptor (a nonnegative integer), or -1 if an
758 * error occurred (in which case, *errno* is set appropriately).
762 * Update the eBPF program in the specified *link_fd* to
766 * Returns zero on success. On error, -1 is returned and *errno*
767 * is set appropriately.
769 * BPF_LINK_GET_FD_BY_ID
771 * Open a file descriptor for the eBPF Link corresponding to
775 * A new file descriptor (a nonnegative integer), or -1 if an
776 * error occurred (in which case, *errno* is set appropriately).
778 * BPF_LINK_GET_NEXT_ID
780 * Fetch the next eBPF link currently loaded into the kernel.
782 * Looks for the eBPF link with an id greater than *start_id*
783 * and updates *next_id* on success. If no other eBPF links
784 * remain with ids higher than *start_id*, returns -1 and sets
785 * *errno* to **ENOENT**.
788 * Returns zero on success. On error, or when no id remains, -1
789 * is returned and *errno* is set appropriately.
793 * Enable eBPF runtime statistics gathering.
795 * Runtime statistics gathering for the eBPF runtime is disabled
796 * by default to minimize the corresponding performance overhead.
797 * This command enables statistics globally.
799 * Multiple programs may independently enable statistics.
800 * After gathering the desired statistics, eBPF runtime statistics
801 * may be disabled again by calling **close**\ (2) for the file
802 * descriptor returned by this function. Statistics will only be
803 * disabled system-wide when all outstanding file descriptors
804 * returned by prior calls for this subcommand are closed.
807 * A new file descriptor (a nonnegative integer), or -1 if an
808 * error occurred (in which case, *errno* is set appropriately).
812 * Create an iterator on top of the specified *link_fd* (as
813 * previously created using **BPF_LINK_CREATE**) and return a
814 * file descriptor that can be used to trigger the iteration.
816 * If the resulting file descriptor is pinned to the filesystem
817 * using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls
818 * for that path will trigger the iterator to read kernel state
819 * using the eBPF program attached to *link_fd*.
822 * A new file descriptor (a nonnegative integer), or -1 if an
823 * error occurred (in which case, *errno* is set appropriately).
827 * Forcefully detach the specified *link_fd* from its
828 * corresponding attachment point.
831 * Returns zero on success. On error, -1 is returned and *errno*
832 * is set appropriately.
836 * Bind a map to the lifetime of an eBPF program.
838 * The map identified by *map_fd* is bound to the program
839 * identified by *prog_fd* and only released when *prog_fd* is
840 * released. This may be used in cases where metadata should be
841 * associated with a program which otherwise does not contain any
842 * references to the map (for example, embedded in the eBPF
843 * program instructions).
846 * Returns zero on success. On error, -1 is returned and *errno*
847 * is set appropriately.
850 * eBPF objects (maps and programs) can be shared between processes.
852 * * After **fork**\ (2), the child inherits file descriptors
853 * referring to the same eBPF objects.
854 * * File descriptors referring to eBPF objects can be transferred over
855 * **unix**\ (7) domain sockets.
856 * * File descriptors referring to eBPF objects can be duplicated in the
857 * usual way, using **dup**\ (2) and similar calls.
858 * * File descriptors referring to eBPF objects can be pinned to the
859 * filesystem using the **BPF_OBJ_PIN** command of **bpf**\ (2).
861 * An eBPF object is deallocated only after all file descriptors referring
862 * to the object have been closed and no references remain pinned to the
863 * filesystem or attached (for example, bound to a program or device).
870 BPF_MAP_GET_NEXT_KEY,
877 BPF_PROG_RUN = BPF_PROG_TEST_RUN,
878 BPF_PROG_GET_NEXT_ID,
880 BPF_PROG_GET_FD_BY_ID,
881 BPF_MAP_GET_FD_BY_ID,
882 BPF_OBJ_GET_INFO_BY_FD,
884 BPF_RAW_TRACEPOINT_OPEN,
886 BPF_BTF_GET_FD_BY_ID,
888 BPF_MAP_LOOKUP_AND_DELETE_ELEM,
891 BPF_MAP_LOOKUP_BATCH,
892 BPF_MAP_LOOKUP_AND_DELETE_BATCH,
893 BPF_MAP_UPDATE_BATCH,
894 BPF_MAP_DELETE_BATCH,
897 BPF_LINK_GET_FD_BY_ID,
898 BPF_LINK_GET_NEXT_ID,
909 BPF_MAP_TYPE_PROG_ARRAY,
910 BPF_MAP_TYPE_PERF_EVENT_ARRAY,
911 BPF_MAP_TYPE_PERCPU_HASH,
912 BPF_MAP_TYPE_PERCPU_ARRAY,
913 BPF_MAP_TYPE_STACK_TRACE,
914 BPF_MAP_TYPE_CGROUP_ARRAY,
915 BPF_MAP_TYPE_LRU_HASH,
916 BPF_MAP_TYPE_LRU_PERCPU_HASH,
917 BPF_MAP_TYPE_LPM_TRIE,
918 BPF_MAP_TYPE_ARRAY_OF_MAPS,
919 BPF_MAP_TYPE_HASH_OF_MAPS,
921 BPF_MAP_TYPE_SOCKMAP,
924 BPF_MAP_TYPE_SOCKHASH,
925 BPF_MAP_TYPE_CGROUP_STORAGE,
926 BPF_MAP_TYPE_REUSEPORT_SOCKARRAY,
927 BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE,
930 BPF_MAP_TYPE_SK_STORAGE,
931 BPF_MAP_TYPE_DEVMAP_HASH,
932 BPF_MAP_TYPE_STRUCT_OPS,
933 BPF_MAP_TYPE_RINGBUF,
934 BPF_MAP_TYPE_INODE_STORAGE,
935 BPF_MAP_TYPE_TASK_STORAGE,
936 BPF_MAP_TYPE_BLOOM_FILTER,
937 BPF_MAP_TYPE_USER_RINGBUF,
940 /* Note that tracing related programs such as
941 * BPF_PROG_TYPE_{KPROBE,TRACEPOINT,PERF_EVENT,RAW_TRACEPOINT}
942 * are not subject to a stable API since kernel internal data
943 * structures can change from release to release and may
944 * therefore break existing tracing BPF programs. Tracing BPF
945 * programs correspond to /a/ specific kernel which is to be
946 * analyzed, and not /a/ specific kernel /and/ all future ones.
949 BPF_PROG_TYPE_UNSPEC,
950 BPF_PROG_TYPE_SOCKET_FILTER,
951 BPF_PROG_TYPE_KPROBE,
952 BPF_PROG_TYPE_SCHED_CLS,
953 BPF_PROG_TYPE_SCHED_ACT,
954 BPF_PROG_TYPE_TRACEPOINT,
956 BPF_PROG_TYPE_PERF_EVENT,
957 BPF_PROG_TYPE_CGROUP_SKB,
958 BPF_PROG_TYPE_CGROUP_SOCK,
959 BPF_PROG_TYPE_LWT_IN,
960 BPF_PROG_TYPE_LWT_OUT,
961 BPF_PROG_TYPE_LWT_XMIT,
962 BPF_PROG_TYPE_SOCK_OPS,
963 BPF_PROG_TYPE_SK_SKB,
964 BPF_PROG_TYPE_CGROUP_DEVICE,
965 BPF_PROG_TYPE_SK_MSG,
966 BPF_PROG_TYPE_RAW_TRACEPOINT,
967 BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
968 BPF_PROG_TYPE_LWT_SEG6LOCAL,
969 BPF_PROG_TYPE_LIRC_MODE2,
970 BPF_PROG_TYPE_SK_REUSEPORT,
971 BPF_PROG_TYPE_FLOW_DISSECTOR,
972 BPF_PROG_TYPE_CGROUP_SYSCTL,
973 BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE,
974 BPF_PROG_TYPE_CGROUP_SOCKOPT,
975 BPF_PROG_TYPE_TRACING,
976 BPF_PROG_TYPE_STRUCT_OPS,
979 BPF_PROG_TYPE_SK_LOOKUP,
980 BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */
983 enum bpf_attach_type {
984 BPF_CGROUP_INET_INGRESS,
985 BPF_CGROUP_INET_EGRESS,
986 BPF_CGROUP_INET_SOCK_CREATE,
988 BPF_SK_SKB_STREAM_PARSER,
989 BPF_SK_SKB_STREAM_VERDICT,
992 BPF_CGROUP_INET4_BIND,
993 BPF_CGROUP_INET6_BIND,
994 BPF_CGROUP_INET4_CONNECT,
995 BPF_CGROUP_INET6_CONNECT,
996 BPF_CGROUP_INET4_POST_BIND,
997 BPF_CGROUP_INET6_POST_BIND,
998 BPF_CGROUP_UDP4_SENDMSG,
999 BPF_CGROUP_UDP6_SENDMSG,
1003 BPF_CGROUP_UDP4_RECVMSG,
1004 BPF_CGROUP_UDP6_RECVMSG,
1005 BPF_CGROUP_GETSOCKOPT,
1006 BPF_CGROUP_SETSOCKOPT,
1013 BPF_CGROUP_INET4_GETPEERNAME,
1014 BPF_CGROUP_INET6_GETPEERNAME,
1015 BPF_CGROUP_INET4_GETSOCKNAME,
1016 BPF_CGROUP_INET6_GETSOCKNAME,
1018 BPF_CGROUP_INET_SOCK_RELEASE,
1023 BPF_SK_REUSEPORT_SELECT,
1024 BPF_SK_REUSEPORT_SELECT_OR_MIGRATE,
1026 BPF_TRACE_KPROBE_MULTI,
1028 __MAX_BPF_ATTACH_TYPE
1031 #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
1033 enum bpf_link_type {
1034 BPF_LINK_TYPE_UNSPEC = 0,
1035 BPF_LINK_TYPE_RAW_TRACEPOINT = 1,
1036 BPF_LINK_TYPE_TRACING = 2,
1037 BPF_LINK_TYPE_CGROUP = 3,
1038 BPF_LINK_TYPE_ITER = 4,
1039 BPF_LINK_TYPE_NETNS = 5,
1040 BPF_LINK_TYPE_XDP = 6,
1041 BPF_LINK_TYPE_PERF_EVENT = 7,
1042 BPF_LINK_TYPE_KPROBE_MULTI = 8,
1043 BPF_LINK_TYPE_STRUCT_OPS = 9,
1048 /* cgroup-bpf attach flags used in BPF_PROG_ATTACH command
1050 * NONE(default): No further bpf programs allowed in the subtree.
1052 * BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program,
1053 * the program in this cgroup yields to sub-cgroup program.
1055 * BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program,
1056 * that cgroup program gets run in addition to the program in this cgroup.
1058 * Only one program is allowed to be attached to a cgroup with
1059 * NONE or BPF_F_ALLOW_OVERRIDE flag.
1060 * Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will
1061 * release old program and attach the new one. Attach flags has to match.
1063 * Multiple programs are allowed to be attached to a cgroup with
1064 * BPF_F_ALLOW_MULTI flag. They are executed in FIFO order
1065 * (those that were attached first, run first)
1066 * The programs of sub-cgroup are executed first, then programs of
1067 * this cgroup and then programs of parent cgroup.
1068 * When children program makes decision (like picking TCP CA or sock bind)
1069 * parent program has a chance to override it.
1071 * With BPF_F_ALLOW_MULTI a new program is added to the end of the list of
1072 * programs for a cgroup. Though it's possible to replace an old program at
1073 * any position by also specifying BPF_F_REPLACE flag and position itself in
1074 * replace_bpf_fd attribute. Old program at this position will be released.
1076 * A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups.
1077 * A cgroup with NONE doesn't allow any programs in sub-cgroups.
1079 * cgrp1 (MULTI progs A, B) ->
1080 * cgrp2 (OVERRIDE prog C) ->
1081 * cgrp3 (MULTI prog D) ->
1082 * cgrp4 (OVERRIDE prog E) ->
1083 * cgrp5 (NONE prog F)
1084 * the event in cgrp5 triggers execution of F,D,A,B in that order.
1085 * if prog F is detached, the execution is E,D,A,B
1086 * if prog F and D are detached, the execution is E,A,B
1087 * if prog F, E and D are detached, the execution is C,A,B
1089 * All eligible programs are executed regardless of return code from
1092 #define BPF_F_ALLOW_OVERRIDE (1U << 0)
1093 #define BPF_F_ALLOW_MULTI (1U << 1)
1094 #define BPF_F_REPLACE (1U << 2)
1096 /* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
1097 * verifier will perform strict alignment checking as if the kernel
1098 * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set,
1099 * and NET_IP_ALIGN defined to 2.
1101 #define BPF_F_STRICT_ALIGNMENT (1U << 0)
1103 /* If BPF_F_ANY_ALIGNMENT is used in BPF_PROF_LOAD command, the
1104 * verifier will allow any alignment whatsoever. On platforms
1105 * with strict alignment requirements for loads ands stores (such
1106 * as sparc and mips) the verifier validates that all loads and
1107 * stores provably follow this requirement. This flag turns that
1108 * checking and enforcement off.
1110 * It is mostly used for testing when we want to validate the
1111 * context and memory access aspects of the verifier, but because
1112 * of an unaligned access the alignment check would trigger before
1113 * the one we are interested in.
1115 #define BPF_F_ANY_ALIGNMENT (1U << 1)
1117 /* BPF_F_TEST_RND_HI32 is used in BPF_PROG_LOAD command for testing purpose.
1118 * Verifier does sub-register def/use analysis and identifies instructions whose
1119 * def only matters for low 32-bit, high 32-bit is never referenced later
1120 * through implicit zero extension. Therefore verifier notifies JIT back-ends
1121 * that it is safe to ignore clearing high 32-bit for these instructions. This
1122 * saves some back-ends a lot of code-gen. However such optimization is not
1123 * necessary on some arches, for example x86_64, arm64 etc, whose JIT back-ends
1124 * hence hasn't used verifier's analysis result. But, we really want to have a
1125 * way to be able to verify the correctness of the described optimization on
1126 * x86_64 on which testsuites are frequently exercised.
1128 * So, this flag is introduced. Once it is set, verifier will randomize high
1129 * 32-bit for those instructions who has been identified as safe to ignore them.
1130 * Then, if verifier is not doing correct analysis, such randomization will
1131 * regress tests to expose bugs.
1133 #define BPF_F_TEST_RND_HI32 (1U << 2)
1135 /* The verifier internal test flag. Behavior is undefined */
1136 #define BPF_F_TEST_STATE_FREQ (1U << 3)
1138 /* If BPF_F_SLEEPABLE is used in BPF_PROG_LOAD command, the verifier will
1139 * restrict map and helper usage for such programs. Sleepable BPF programs can
1140 * only be attached to hooks where kernel execution context allows sleeping.
1141 * Such programs are allowed to use helpers that may sleep like
1142 * bpf_copy_from_user().
1144 #define BPF_F_SLEEPABLE (1U << 4)
1146 /* If BPF_F_XDP_HAS_FRAGS is used in BPF_PROG_LOAD command, the loaded program
1147 * fully support xdp frags.
1149 #define BPF_F_XDP_HAS_FRAGS (1U << 5)
1151 /* link_create.kprobe_multi.flags used in LINK_CREATE command for
1152 * BPF_TRACE_KPROBE_MULTI attach type to create return probe.
1154 #define BPF_F_KPROBE_MULTI_RETURN (1U << 0)
1156 /* When BPF ldimm64's insn[0].src_reg != 0 then this can have
1157 * the following extensions:
1159 * insn[0].src_reg: BPF_PSEUDO_MAP_[FD|IDX]
1160 * insn[0].imm: map fd or fd_idx
1164 * ldimm64 rewrite: address of map
1165 * verifier type: CONST_PTR_TO_MAP
1167 #define BPF_PSEUDO_MAP_FD 1
1168 #define BPF_PSEUDO_MAP_IDX 5
1170 /* insn[0].src_reg: BPF_PSEUDO_MAP_[IDX_]VALUE
1171 * insn[0].imm: map fd or fd_idx
1172 * insn[1].imm: offset into value
1175 * ldimm64 rewrite: address of map[0]+offset
1176 * verifier type: PTR_TO_MAP_VALUE
1178 #define BPF_PSEUDO_MAP_VALUE 2
1179 #define BPF_PSEUDO_MAP_IDX_VALUE 6
1181 /* insn[0].src_reg: BPF_PSEUDO_BTF_ID
1182 * insn[0].imm: kernel btd id of VAR
1186 * ldimm64 rewrite: address of the kernel variable
1187 * verifier type: PTR_TO_BTF_ID or PTR_TO_MEM, depending on whether the var
1190 #define BPF_PSEUDO_BTF_ID 3
1191 /* insn[0].src_reg: BPF_PSEUDO_FUNC
1192 * insn[0].imm: insn offset to the func
1196 * ldimm64 rewrite: address of the function
1197 * verifier type: PTR_TO_FUNC.
1199 #define BPF_PSEUDO_FUNC 4
1201 /* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative
1202 * offset to another bpf function
1204 #define BPF_PSEUDO_CALL 1
1205 /* when bpf_call->src_reg == BPF_PSEUDO_KFUNC_CALL,
1206 * bpf_call->imm == btf_id of a BTF_KIND_FUNC in the running kernel
1208 #define BPF_PSEUDO_KFUNC_CALL 2
1210 /* flags for BPF_MAP_UPDATE_ELEM command */
1212 BPF_ANY = 0, /* create new element or update existing */
1213 BPF_NOEXIST = 1, /* create new element if it didn't exist */
1214 BPF_EXIST = 2, /* update existing element */
1215 BPF_F_LOCK = 4, /* spin_lock-ed map_lookup/map_update */
1218 /* flags for BPF_MAP_CREATE command */
1220 BPF_F_NO_PREALLOC = (1U << 0),
1221 /* Instead of having one common LRU list in the
1222 * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list
1223 * which can scale and perform better.
1224 * Note, the LRU nodes (including free nodes) cannot be moved
1225 * across different LRU lists.
1227 BPF_F_NO_COMMON_LRU = (1U << 1),
1228 /* Specify numa node during map creation */
1229 BPF_F_NUMA_NODE = (1U << 2),
1231 /* Flags for accessing BPF object from syscall side. */
1232 BPF_F_RDONLY = (1U << 3),
1233 BPF_F_WRONLY = (1U << 4),
1235 /* Flag for stack_map, store build_id+offset instead of pointer */
1236 BPF_F_STACK_BUILD_ID = (1U << 5),
1238 /* Zero-initialize hash function seed. This should only be used for testing. */
1239 BPF_F_ZERO_SEED = (1U << 6),
1241 /* Flags for accessing BPF object from program side. */
1242 BPF_F_RDONLY_PROG = (1U << 7),
1243 BPF_F_WRONLY_PROG = (1U << 8),
1245 /* Clone map from listener for newly accepted socket */
1246 BPF_F_CLONE = (1U << 9),
1248 /* Enable memory-mapping BPF map */
1249 BPF_F_MMAPABLE = (1U << 10),
1251 /* Share perf_event among processes */
1252 BPF_F_PRESERVE_ELEMS = (1U << 11),
1254 /* Create a map that is suitable to be an inner map with dynamic max entries */
1255 BPF_F_INNER_MAP = (1U << 12),
1258 /* Flags for BPF_PROG_QUERY. */
1260 /* Query effective (directly attached + inherited from ancestor cgroups)
1261 * programs that will be executed for events within a cgroup.
1262 * attach_flags with this flag are always returned 0.
1264 #define BPF_F_QUERY_EFFECTIVE (1U << 0)
1266 /* Flags for BPF_PROG_TEST_RUN */
1268 /* If set, run the test on the cpu specified by bpf_attr.test.cpu */
1269 #define BPF_F_TEST_RUN_ON_CPU (1U << 0)
1270 /* If set, XDP frames will be transmitted after processing */
1271 #define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1)
1273 /* type for BPF_ENABLE_STATS */
1274 enum bpf_stats_type {
1275 /* enabled run_time_ns and run_cnt */
1276 BPF_STATS_RUN_TIME = 0,
1279 enum bpf_stack_build_id_status {
1280 /* user space need an empty entry to identify end of a trace */
1281 BPF_STACK_BUILD_ID_EMPTY = 0,
1282 /* with valid build_id and offset */
1283 BPF_STACK_BUILD_ID_VALID = 1,
1284 /* couldn't get build_id, fallback to ip */
1285 BPF_STACK_BUILD_ID_IP = 2,
1288 #define BPF_BUILD_ID_SIZE 20
1289 struct bpf_stack_build_id {
1291 unsigned char build_id[BPF_BUILD_ID_SIZE];
1298 #define BPF_OBJ_NAME_LEN 16U
1301 struct { /* anonymous struct used by BPF_MAP_CREATE command */
1302 __u32 map_type; /* one of enum bpf_map_type */
1303 __u32 key_size; /* size of key in bytes */
1304 __u32 value_size; /* size of value in bytes */
1305 __u32 max_entries; /* max number of entries in a map */
1306 __u32 map_flags; /* BPF_MAP_CREATE related
1307 * flags defined above.
1309 __u32 inner_map_fd; /* fd pointing to the inner map */
1310 __u32 numa_node; /* numa node (effective only if
1311 * BPF_F_NUMA_NODE is set).
1313 char map_name[BPF_OBJ_NAME_LEN];
1314 __u32 map_ifindex; /* ifindex of netdev to create on */
1315 __u32 btf_fd; /* fd pointing to a BTF type data */
1316 __u32 btf_key_type_id; /* BTF type_id of the key */
1317 __u32 btf_value_type_id; /* BTF type_id of the value */
1318 __u32 btf_vmlinux_value_type_id;/* BTF type_id of a kernel-
1319 * struct stored as the
1322 /* Any per-map-type extra fields
1324 * BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the
1325 * number of hash functions (if 0, the bloom filter will default
1326 * to using 5 hash functions).
1331 struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
1335 __aligned_u64 value;
1336 __aligned_u64 next_key;
1341 struct { /* struct used by BPF_MAP_*_BATCH commands */
1342 __aligned_u64 in_batch; /* start batch,
1343 * NULL to start from beginning
1345 __aligned_u64 out_batch; /* output: next start batch */
1347 __aligned_u64 values;
1348 __u32 count; /* input/output:
1349 * input: # of key/value
1351 * output: # of filled elements
1358 struct { /* anonymous struct used by BPF_PROG_LOAD command */
1359 __u32 prog_type; /* one of enum bpf_prog_type */
1361 __aligned_u64 insns;
1362 __aligned_u64 license;
1363 __u32 log_level; /* verbosity level of verifier */
1364 __u32 log_size; /* size of user buffer */
1365 __aligned_u64 log_buf; /* user supplied buffer */
1366 __u32 kern_version; /* not used */
1368 char prog_name[BPF_OBJ_NAME_LEN];
1369 __u32 prog_ifindex; /* ifindex of netdev to prep for */
1370 /* For some prog types expected attach type must be known at
1371 * load time to verify attach type specific parts of prog
1372 * (context accesses, allowed helpers, etc).
1374 __u32 expected_attach_type;
1375 __u32 prog_btf_fd; /* fd pointing to BTF type data */
1376 __u32 func_info_rec_size; /* userspace bpf_func_info size */
1377 __aligned_u64 func_info; /* func info */
1378 __u32 func_info_cnt; /* number of bpf_func_info records */
1379 __u32 line_info_rec_size; /* userspace bpf_line_info size */
1380 __aligned_u64 line_info; /* line info */
1381 __u32 line_info_cnt; /* number of bpf_line_info records */
1382 __u32 attach_btf_id; /* in-kernel BTF type id to attach to */
1384 /* valid prog_fd to attach to bpf prog */
1385 __u32 attach_prog_fd;
1386 /* or valid module BTF object fd or 0 to attach to vmlinux */
1387 __u32 attach_btf_obj_fd;
1389 __u32 core_relo_cnt; /* number of bpf_core_relo */
1390 __aligned_u64 fd_array; /* array of FDs */
1391 __aligned_u64 core_relos;
1392 __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */
1395 struct { /* anonymous struct used by BPF_OBJ_* commands */
1396 __aligned_u64 pathname;
1401 struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */
1402 __u32 target_fd; /* container object to attach to */
1403 __u32 attach_bpf_fd; /* eBPF program to attach */
1406 __u32 replace_bpf_fd; /* previously attached eBPF
1407 * program to replace if
1408 * BPF_F_REPLACE is used
1412 struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */
1415 __u32 data_size_in; /* input: len of data_in */
1416 __u32 data_size_out; /* input/output: len of data_out
1417 * returns ENOSPC if data_out
1420 __aligned_u64 data_in;
1421 __aligned_u64 data_out;
1424 __u32 ctx_size_in; /* input: len of ctx_in */
1425 __u32 ctx_size_out; /* input/output: len of ctx_out
1426 * returns ENOSPC if ctx_out
1429 __aligned_u64 ctx_in;
1430 __aligned_u64 ctx_out;
1436 struct { /* anonymous struct used by BPF_*_GET_*_ID */
1448 struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */
1454 struct { /* anonymous struct used by BPF_PROG_QUERY command */
1455 __u32 target_fd; /* container object to query */
1459 __aligned_u64 prog_ids;
1461 /* output: per-program attach_flags.
1462 * not allowed to be set during effective query.
1464 __aligned_u64 prog_attach_flags;
1467 struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */
1472 struct { /* anonymous struct for BPF_BTF_LOAD */
1474 __aligned_u64 btf_log_buf;
1477 __u32 btf_log_level;
1481 __u32 pid; /* input: pid */
1482 __u32 fd; /* input: fd */
1483 __u32 flags; /* input: flags */
1484 __u32 buf_len; /* input/output: buf len */
1485 __aligned_u64 buf; /* input/output:
1486 * tp_name for tracepoint
1488 * filename for uprobe
1490 __u32 prog_id; /* output: prod_id */
1491 __u32 fd_type; /* output: BPF_FD_TYPE_* */
1492 __u64 probe_offset; /* output: probe_offset */
1493 __u64 probe_addr; /* output: probe_addr */
1496 struct { /* struct used by BPF_LINK_CREATE command */
1497 __u32 prog_fd; /* eBPF program to attach */
1499 __u32 target_fd; /* object to attach to */
1500 __u32 target_ifindex; /* target ifindex */
1502 __u32 attach_type; /* attach type */
1503 __u32 flags; /* extra flags */
1505 __u32 target_btf_id; /* btf_id of target to attach to */
1507 __aligned_u64 iter_info; /* extra bpf_iter_link_info */
1508 __u32 iter_info_len; /* iter_info length */
1511 /* black box user-provided value passed through
1512 * to BPF program at the execution time and
1513 * accessible through bpf_get_attach_cookie() BPF helper
1521 __aligned_u64 addrs;
1522 __aligned_u64 cookies;
1525 /* this is overlaid with the target_btf_id above. */
1526 __u32 target_btf_id;
1527 /* black box user-provided value passed through
1528 * to BPF program at the execution time and
1529 * accessible through bpf_get_attach_cookie() BPF helper
1536 struct { /* struct used by BPF_LINK_UPDATE command */
1537 __u32 link_fd; /* link fd */
1538 /* new program fd to update link with */
1540 __u32 flags; /* extra flags */
1541 /* expected link's program fd; is specified only if
1542 * BPF_F_REPLACE flag is set in flags */
1550 struct { /* struct used by BPF_ENABLE_STATS command */
1554 struct { /* struct used by BPF_ITER_CREATE command */
1559 struct { /* struct used by BPF_PROG_BIND_MAP command */
1562 __u32 flags; /* extra flags */
1565 } __attribute__((aligned(8)));
1567 /* The description below is an attempt at providing documentation to eBPF
1568 * developers about the multiple available eBPF helper functions. It can be
1569 * parsed and used to produce a manual page. The workflow is the following,
1570 * and requires the rst2man utility:
1572 * $ ./scripts/bpf_doc.py \
1573 * --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
1574 * $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
1575 * $ man /tmp/bpf-helpers.7
1577 * Note that in order to produce this external documentation, some RST
1578 * formatting is used in the descriptions to get "bold" and "italics" in
1579 * manual pages. Also note that the few trailing white spaces are
1580 * intentional, removing them would break paragraphs for rst2man.
1582 * Start of BPF helper function descriptions:
1584 * void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
1586 * Perform a lookup in *map* for an entry associated to *key*.
1588 * Map value associated to *key*, or **NULL** if no entry was
1591 * long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
1593 * Add or update the value of the entry associated to *key* in
1594 * *map* with *value*. *flags* is one of:
1597 * The entry for *key* must not exist in the map.
1599 * The entry for *key* must already exist in the map.
1601 * No condition on the existence of the entry for *key*.
1603 * Flag value **BPF_NOEXIST** cannot be used for maps of types
1604 * **BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY** (all
1605 * elements always exist), the helper would return an error.
1607 * 0 on success, or a negative error in case of failure.
1609 * long bpf_map_delete_elem(struct bpf_map *map, const void *key)
1611 * Delete entry with *key* from *map*.
1613 * 0 on success, or a negative error in case of failure.
1615 * long bpf_probe_read(void *dst, u32 size, const void *unsafe_ptr)
1617 * For tracing programs, safely attempt to read *size* bytes from
1618 * kernel space address *unsafe_ptr* and store the data in *dst*.
1620 * Generally, use **bpf_probe_read_user**\ () or
1621 * **bpf_probe_read_kernel**\ () instead.
1623 * 0 on success, or a negative error in case of failure.
1625 * u64 bpf_ktime_get_ns(void)
1627 * Return the time elapsed since system boot, in nanoseconds.
1628 * Does not include time the system was suspended.
1629 * See: **clock_gettime**\ (**CLOCK_MONOTONIC**)
1633 * long bpf_trace_printk(const char *fmt, u32 fmt_size, ...)
1635 * This helper is a "printk()-like" facility for debugging. It
1636 * prints a message defined by format *fmt* (of size *fmt_size*)
1637 * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if
1638 * available. It can take up to three additional **u64**
1639 * arguments (as an eBPF helpers, the total number of arguments is
1642 * Each time the helper is called, it appends a line to the trace.
1643 * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is
1644 * open, use *\/sys/kernel/debug/tracing/trace_pipe* to avoid this.
1645 * The format of the trace is customizable, and the exact output
1646 * one will get depends on the options set in
1647 * *\/sys/kernel/debug/tracing/trace_options* (see also the
1648 * *README* file under the same directory). However, it usually
1649 * defaults to something like:
1653 * telnet-470 [001] .N.. 419421.045894: 0x00000001: <formatted msg>
1657 * * ``telnet`` is the name of the current task.
1658 * * ``470`` is the PID of the current task.
1659 * * ``001`` is the CPU number on which the task is
1661 * * In ``.N..``, each character refers to a set of
1662 * options (whether irqs are enabled, scheduling
1663 * options, whether hard/softirqs are running, level of
1664 * preempt_disabled respectively). **N** means that
1665 * **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED**
1667 * * ``419421.045894`` is a timestamp.
1668 * * ``0x00000001`` is a fake value used by BPF for the
1669 * instruction pointer register.
1670 * * ``<formatted msg>`` is the message formatted with
1673 * The conversion specifiers supported by *fmt* are similar, but
1674 * more limited than for printk(). They are **%d**, **%i**,
1675 * **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**,
1676 * **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size
1677 * of field, padding with zeroes, etc.) is available, and the
1678 * helper will return **-EINVAL** (but print nothing) if it
1679 * encounters an unknown specifier.
1681 * Also, note that **bpf_trace_printk**\ () is slow, and should
1682 * only be used for debugging purposes. For this reason, a notice
1683 * block (spanning several lines) is printed to kernel logs and
1684 * states that the helper should not be used "for production use"
1685 * the first time this helper is used (or more precisely, when
1686 * **trace_printk**\ () buffers are allocated). For passing values
1687 * to user space, perf events should be preferred.
1689 * The number of bytes written to the buffer, or a negative error
1690 * in case of failure.
1692 * u32 bpf_get_prandom_u32(void)
1694 * Get a pseudo-random number.
1696 * From a security point of view, this helper uses its own
1697 * pseudo-random internal state, and cannot be used to infer the
1698 * seed of other random functions in the kernel. However, it is
1699 * essential to note that the generator used by the helper is not
1700 * cryptographically secure.
1702 * A random 32-bit unsigned value.
1704 * u32 bpf_get_smp_processor_id(void)
1706 * Get the SMP (symmetric multiprocessing) processor id. Note that
1707 * all programs run with migration disabled, which means that the
1708 * SMP processor id is stable during all the execution of the
1711 * The SMP id of the processor running the program.
1713 * long bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags)
1715 * Store *len* bytes from address *from* into the packet
1716 * associated to *skb*, at *offset*. *flags* are a combination of
1717 * **BPF_F_RECOMPUTE_CSUM** (automatically recompute the
1718 * checksum for the packet after storing the bytes) and
1719 * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\
1720 * **->swhash** and *skb*\ **->l4hash** to 0).
1722 * A call to this helper is susceptible to change the underlying
1723 * packet buffer. Therefore, at load time, all checks on pointers
1724 * previously done by the verifier are invalidated and must be
1725 * performed again, if the helper is used in combination with
1726 * direct packet access.
1728 * 0 on success, or a negative error in case of failure.
1730 * long bpf_l3_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 size)
1732 * Recompute the layer 3 (e.g. IP) checksum for the packet
1733 * associated to *skb*. Computation is incremental, so the helper
1734 * must know the former value of the header field that was
1735 * modified (*from*), the new value of this field (*to*), and the
1736 * number of bytes (2 or 4) for this field, stored in *size*.
1737 * Alternatively, it is possible to store the difference between
1738 * the previous and the new values of the header field in *to*, by
1739 * setting *from* and *size* to 0. For both methods, *offset*
1740 * indicates the location of the IP checksum within the packet.
1742 * This helper works in combination with **bpf_csum_diff**\ (),
1743 * which does not update the checksum in-place, but offers more
1744 * flexibility and can handle sizes larger than 2 or 4 for the
1745 * checksum to update.
1747 * A call to this helper is susceptible to change the underlying
1748 * packet buffer. Therefore, at load time, all checks on pointers
1749 * previously done by the verifier are invalidated and must be
1750 * performed again, if the helper is used in combination with
1751 * direct packet access.
1753 * 0 on success, or a negative error in case of failure.
1755 * long bpf_l4_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 flags)
1757 * Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the
1758 * packet associated to *skb*. Computation is incremental, so the
1759 * helper must know the former value of the header field that was
1760 * modified (*from*), the new value of this field (*to*), and the
1761 * number of bytes (2 or 4) for this field, stored on the lowest
1762 * four bits of *flags*. Alternatively, it is possible to store
1763 * the difference between the previous and the new values of the
1764 * header field in *to*, by setting *from* and the four lowest
1765 * bits of *flags* to 0. For both methods, *offset* indicates the
1766 * location of the IP checksum within the packet. In addition to
1767 * the size of the field, *flags* can be added (bitwise OR) actual
1768 * flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left
1769 * untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and
1770 * for updates resulting in a null checksum the value is set to
1771 * **CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates
1772 * the checksum is to be computed against a pseudo-header.
1774 * This helper works in combination with **bpf_csum_diff**\ (),
1775 * which does not update the checksum in-place, but offers more
1776 * flexibility and can handle sizes larger than 2 or 4 for the
1777 * checksum to update.
1779 * A call to this helper is susceptible to change the underlying
1780 * packet buffer. Therefore, at load time, all checks on pointers
1781 * previously done by the verifier are invalidated and must be
1782 * performed again, if the helper is used in combination with
1783 * direct packet access.
1785 * 0 on success, or a negative error in case of failure.
1787 * long bpf_tail_call(void *ctx, struct bpf_map *prog_array_map, u32 index)
1789 * This special helper is used to trigger a "tail call", or in
1790 * other words, to jump into another eBPF program. The same stack
1791 * frame is used (but values on stack and in registers for the
1792 * caller are not accessible to the callee). This mechanism allows
1793 * for program chaining, either for raising the maximum number of
1794 * available eBPF instructions, or to execute given programs in
1795 * conditional blocks. For security reasons, there is an upper
1796 * limit to the number of successive tail calls that can be
1799 * Upon call of this helper, the program attempts to jump into a
1800 * program referenced at index *index* in *prog_array_map*, a
1801 * special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes
1802 * *ctx*, a pointer to the context.
1804 * If the call succeeds, the kernel immediately runs the first
1805 * instruction of the new program. This is not a function call,
1806 * and it never returns to the previous program. If the call
1807 * fails, then the helper has no effect, and the caller continues
1808 * to run its subsequent instructions. A call can fail if the
1809 * destination program for the jump does not exist (i.e. *index*
1810 * is superior to the number of entries in *prog_array_map*), or
1811 * if the maximum number of tail calls has been reached for this
1812 * chain of programs. This limit is defined in the kernel by the
1813 * macro **MAX_TAIL_CALL_CNT** (not accessible to user space),
1814 * which is currently set to 33.
1816 * 0 on success, or a negative error in case of failure.
1818 * long bpf_clone_redirect(struct sk_buff *skb, u32 ifindex, u64 flags)
1820 * Clone and redirect the packet associated to *skb* to another
1821 * net device of index *ifindex*. Both ingress and egress
1822 * interfaces can be used for redirection. The **BPF_F_INGRESS**
1823 * value in *flags* is used to make the distinction (ingress path
1824 * is selected if the flag is present, egress path otherwise).
1825 * This is the only flag supported for now.
1827 * In comparison with **bpf_redirect**\ () helper,
1828 * **bpf_clone_redirect**\ () has the associated cost of
1829 * duplicating the packet buffer, but this can be executed out of
1830 * the eBPF program. Conversely, **bpf_redirect**\ () is more
1831 * efficient, but it is handled through an action code where the
1832 * redirection happens only after the eBPF program has returned.
1834 * A call to this helper is susceptible to change the underlying
1835 * packet buffer. Therefore, at load time, all checks on pointers
1836 * previously done by the verifier are invalidated and must be
1837 * performed again, if the helper is used in combination with
1838 * direct packet access.
1840 * 0 on success, or a negative error in case of failure. Positive
1841 * error indicates a potential drop or congestion in the target
1842 * device. The particular positive error codes are not defined.
1844 * u64 bpf_get_current_pid_tgid(void)
1846 * Get the current pid and tgid.
1848 * A 64-bit integer containing the current tgid and pid, and
1850 * *current_task*\ **->tgid << 32 \|**
1851 * *current_task*\ **->pid**.
1853 * u64 bpf_get_current_uid_gid(void)
1855 * Get the current uid and gid.
1857 * A 64-bit integer containing the current GID and UID, and
1858 * created as such: *current_gid* **<< 32 \|** *current_uid*.
1860 * long bpf_get_current_comm(void *buf, u32 size_of_buf)
1862 * Copy the **comm** attribute of the current task into *buf* of
1863 * *size_of_buf*. The **comm** attribute contains the name of
1864 * the executable (excluding the path) for the current task. The
1865 * *size_of_buf* must be strictly positive. On success, the
1866 * helper makes sure that the *buf* is NUL-terminated. On failure,
1867 * it is filled with zeroes.
1869 * 0 on success, or a negative error in case of failure.
1871 * u32 bpf_get_cgroup_classid(struct sk_buff *skb)
1873 * Retrieve the classid for the current task, i.e. for the net_cls
1874 * cgroup to which *skb* belongs.
1876 * This helper can be used on TC egress path, but not on ingress.
1878 * The net_cls cgroup provides an interface to tag network packets
1879 * based on a user-provided identifier for all traffic coming from
1880 * the tasks belonging to the related cgroup. See also the related
1881 * kernel documentation, available from the Linux sources in file
1882 * *Documentation/admin-guide/cgroup-v1/net_cls.rst*.
1884 * The Linux kernel has two versions for cgroups: there are
1885 * cgroups v1 and cgroups v2. Both are available to users, who can
1886 * use a mixture of them, but note that the net_cls cgroup is for
1887 * cgroup v1 only. This makes it incompatible with BPF programs
1888 * run on cgroups, which is a cgroup-v2-only feature (a socket can
1889 * only hold data for one version of cgroups at a time).
1891 * This helper is only available is the kernel was compiled with
1892 * the **CONFIG_CGROUP_NET_CLASSID** configuration option set to
1893 * "**y**" or to "**m**".
1895 * The classid, or 0 for the default unconfigured classid.
1897 * long bpf_skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci)
1899 * Push a *vlan_tci* (VLAN tag control information) of protocol
1900 * *vlan_proto* to the packet associated to *skb*, then update
1901 * the checksum. Note that if *vlan_proto* is different from
1902 * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to
1903 * be **ETH_P_8021Q**.
1905 * A call to this helper is susceptible to change the underlying
1906 * packet buffer. Therefore, at load time, all checks on pointers
1907 * previously done by the verifier are invalidated and must be
1908 * performed again, if the helper is used in combination with
1909 * direct packet access.
1911 * 0 on success, or a negative error in case of failure.
1913 * long bpf_skb_vlan_pop(struct sk_buff *skb)
1915 * Pop a VLAN header from the packet associated to *skb*.
1917 * A call to this helper is susceptible to change the underlying
1918 * packet buffer. Therefore, at load time, all checks on pointers
1919 * previously done by the verifier are invalidated and must be
1920 * performed again, if the helper is used in combination with
1921 * direct packet access.
1923 * 0 on success, or a negative error in case of failure.
1925 * long bpf_skb_get_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags)
1927 * Get tunnel metadata. This helper takes a pointer *key* to an
1928 * empty **struct bpf_tunnel_key** of **size**, that will be
1929 * filled with tunnel metadata for the packet associated to *skb*.
1930 * The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which
1931 * indicates that the tunnel is based on IPv6 protocol instead of
1934 * The **struct bpf_tunnel_key** is an object that generalizes the
1935 * principal parameters used by various tunneling protocols into a
1936 * single struct. This way, it can be used to easily make a
1937 * decision based on the contents of the encapsulation header,
1938 * "summarized" in this struct. In particular, it holds the IP
1939 * address of the remote end (IPv4 or IPv6, depending on the case)
1940 * in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also,
1941 * this struct exposes the *key*\ **->tunnel_id**, which is
1942 * generally mapped to a VNI (Virtual Network Identifier), making
1943 * it programmable together with the **bpf_skb_set_tunnel_key**\
1946 * Let's imagine that the following code is part of a program
1947 * attached to the TC ingress interface, on one end of a GRE
1948 * tunnel, and is supposed to filter out all messages coming from
1949 * remote ends with IPv4 address other than 10.0.0.1:
1954 * struct bpf_tunnel_key key = {};
1956 * ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0);
1958 * return TC_ACT_SHOT; // drop packet
1960 * if (key.remote_ipv4 != 0x0a000001)
1961 * return TC_ACT_SHOT; // drop packet
1963 * return TC_ACT_OK; // accept packet
1965 * This interface can also be used with all encapsulation devices
1966 * that can operate in "collect metadata" mode: instead of having
1967 * one network device per specific configuration, the "collect
1968 * metadata" mode only requires a single device where the
1969 * configuration can be extracted from this helper.
1971 * This can be used together with various tunnels such as VXLan,
1972 * Geneve, GRE or IP in IP (IPIP).
1974 * 0 on success, or a negative error in case of failure.
1976 * long bpf_skb_set_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags)
1978 * Populate tunnel metadata for packet associated to *skb.* The
1979 * tunnel metadata is set to the contents of *key*, of *size*. The
1980 * *flags* can be set to a combination of the following values:
1982 * **BPF_F_TUNINFO_IPV6**
1983 * Indicate that the tunnel is based on IPv6 protocol
1985 * **BPF_F_ZERO_CSUM_TX**
1986 * For IPv4 packets, add a flag to tunnel metadata
1987 * indicating that checksum computation should be skipped
1988 * and checksum set to zeroes.
1989 * **BPF_F_DONT_FRAGMENT**
1990 * Add a flag to tunnel metadata indicating that the
1991 * packet should not be fragmented.
1992 * **BPF_F_SEQ_NUMBER**
1993 * Add a flag to tunnel metadata indicating that a
1994 * sequence number should be added to tunnel header before
1995 * sending the packet. This flag was added for GRE
1996 * encapsulation, but might be used with other protocols
1997 * as well in the future.
1999 * Here is a typical usage on the transmit path:
2003 * struct bpf_tunnel_key key;
2005 * bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0);
2006 * bpf_clone_redirect(skb, vxlan_dev_ifindex, 0);
2008 * See also the description of the **bpf_skb_get_tunnel_key**\ ()
2009 * helper for additional information.
2011 * 0 on success, or a negative error in case of failure.
2013 * u64 bpf_perf_event_read(struct bpf_map *map, u64 flags)
2015 * Read the value of a perf event counter. This helper relies on a
2016 * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of
2017 * the perf event counter is selected when *map* is updated with
2018 * perf event file descriptors. The *map* is an array whose size
2019 * is the number of available CPUs, and each cell contains a value
2020 * relative to one CPU. The value to retrieve is indicated by
2021 * *flags*, that contains the index of the CPU to look up, masked
2022 * with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
2023 * **BPF_F_CURRENT_CPU** to indicate that the value for the
2024 * current CPU should be retrieved.
2026 * Note that before Linux 4.13, only hardware perf event can be
2029 * Also, be aware that the newer helper
2030 * **bpf_perf_event_read_value**\ () is recommended over
2031 * **bpf_perf_event_read**\ () in general. The latter has some ABI
2032 * quirks where error and counter value are used as a return code
2033 * (which is wrong to do since ranges may overlap). This issue is
2034 * fixed with **bpf_perf_event_read_value**\ (), which at the same
2035 * time provides more features over the **bpf_perf_event_read**\
2036 * () interface. Please refer to the description of
2037 * **bpf_perf_event_read_value**\ () for details.
2039 * The value of the perf event counter read from the map, or a
2040 * negative error code in case of failure.
2042 * long bpf_redirect(u32 ifindex, u64 flags)
2044 * Redirect the packet to another net device of index *ifindex*.
2045 * This helper is somewhat similar to **bpf_clone_redirect**\
2046 * (), except that the packet is not cloned, which provides
2047 * increased performance.
2049 * Except for XDP, both ingress and egress interfaces can be used
2050 * for redirection. The **BPF_F_INGRESS** value in *flags* is used
2051 * to make the distinction (ingress path is selected if the flag
2052 * is present, egress path otherwise). Currently, XDP only
2053 * supports redirection to the egress interface, and accepts no
2056 * The same effect can also be attained with the more generic
2057 * **bpf_redirect_map**\ (), which uses a BPF map to store the
2058 * redirect target instead of providing it directly to the helper.
2060 * For XDP, the helper returns **XDP_REDIRECT** on success or
2061 * **XDP_ABORTED** on error. For other program types, the values
2062 * are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on
2065 * u32 bpf_get_route_realm(struct sk_buff *skb)
2067 * Retrieve the realm or the route, that is to say the
2068 * **tclassid** field of the destination for the *skb*. The
2069 * identifier retrieved is a user-provided tag, similar to the
2070 * one used with the net_cls cgroup (see description for
2071 * **bpf_get_cgroup_classid**\ () helper), but here this tag is
2072 * held by a route (a destination entry), not by a task.
2074 * Retrieving this identifier works with the clsact TC egress hook
2075 * (see also **tc-bpf(8)**), or alternatively on conventional
2076 * classful egress qdiscs, but not on TC ingress path. In case of
2077 * clsact TC egress hook, this has the advantage that, internally,
2078 * the destination entry has not been dropped yet in the transmit
2079 * path. Therefore, the destination entry does not need to be
2080 * artificially held via **netif_keep_dst**\ () for a classful
2081 * qdisc until the *skb* is freed.
2083 * This helper is available only if the kernel was compiled with
2084 * **CONFIG_IP_ROUTE_CLASSID** configuration option.
2086 * The realm of the route for the packet associated to *skb*, or 0
2087 * if none was found.
2089 * long bpf_perf_event_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
2091 * Write raw *data* blob into a special BPF perf event held by
2092 * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
2093 * event must have the following attributes: **PERF_SAMPLE_RAW**
2094 * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
2095 * **PERF_COUNT_SW_BPF_OUTPUT** as **config**.
2097 * The *flags* are used to indicate the index in *map* for which
2098 * the value must be put, masked with **BPF_F_INDEX_MASK**.
2099 * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
2100 * to indicate that the index of the current CPU core should be
2103 * The value to write, of *size*, is passed through eBPF stack and
2104 * pointed by *data*.
2106 * The context of the program *ctx* needs also be passed to the
2109 * On user space, a program willing to read the values needs to
2110 * call **perf_event_open**\ () on the perf event (either for
2111 * one or for all CPUs) and to store the file descriptor into the
2112 * *map*. This must be done before the eBPF program can send data
2113 * into it. An example is available in file
2114 * *samples/bpf/trace_output_user.c* in the Linux kernel source
2115 * tree (the eBPF program counterpart is in
2116 * *samples/bpf/trace_output_kern.c*).
2118 * **bpf_perf_event_output**\ () achieves better performance
2119 * than **bpf_trace_printk**\ () for sharing data with user
2120 * space, and is much better suitable for streaming data from eBPF
2123 * Note that this helper is not restricted to tracing use cases
2124 * and can be used with programs attached to TC or XDP as well,
2125 * where it allows for passing data to user space listeners. Data
2128 * * Only custom structs,
2129 * * Only the packet payload, or
2130 * * A combination of both.
2132 * 0 on success, or a negative error in case of failure.
2134 * long bpf_skb_load_bytes(const void *skb, u32 offset, void *to, u32 len)
2136 * This helper was provided as an easy way to load data from a
2137 * packet. It can be used to load *len* bytes from *offset* from
2138 * the packet associated to *skb*, into the buffer pointed by
2141 * Since Linux 4.7, usage of this helper has mostly been replaced
2142 * by "direct packet access", enabling packet data to be
2143 * manipulated with *skb*\ **->data** and *skb*\ **->data_end**
2144 * pointing respectively to the first byte of packet data and to
2145 * the byte after the last byte of packet data. However, it
2146 * remains useful if one wishes to read large quantities of data
2147 * at once from a packet into the eBPF stack.
2149 * 0 on success, or a negative error in case of failure.
2151 * long bpf_get_stackid(void *ctx, struct bpf_map *map, u64 flags)
2153 * Walk a user or a kernel stack and return its id. To achieve
2154 * this, the helper needs *ctx*, which is a pointer to the context
2155 * on which the tracing program is executed, and a pointer to a
2156 * *map* of type **BPF_MAP_TYPE_STACK_TRACE**.
2158 * The last argument, *flags*, holds the number of stack frames to
2159 * skip (from 0 to 255), masked with
2160 * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
2161 * a combination of the following flags:
2163 * **BPF_F_USER_STACK**
2164 * Collect a user space stack instead of a kernel stack.
2165 * **BPF_F_FAST_STACK_CMP**
2166 * Compare stacks by hash only.
2167 * **BPF_F_REUSE_STACKID**
2168 * If two different stacks hash into the same *stackid*,
2169 * discard the old one.
2171 * The stack id retrieved is a 32 bit long integer handle which
2172 * can be further combined with other data (including other stack
2173 * ids) and used as a key into maps. This can be useful for
2174 * generating a variety of graphs (such as flame graphs or off-cpu
2177 * For walking a stack, this helper is an improvement over
2178 * **bpf_probe_read**\ (), which can be used with unrolled loops
2179 * but is not efficient and consumes a lot of eBPF instructions.
2180 * Instead, **bpf_get_stackid**\ () can collect up to
2181 * **PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that
2182 * this limit can be controlled with the **sysctl** program, and
2183 * that it should be manually increased in order to profile long
2184 * user stacks (such as stacks for Java programs). To do so, use:
2188 * # sysctl kernel.perf_event_max_stack=<new value>
2190 * The positive or null stack id on success, or a negative error
2191 * in case of failure.
2193 * s64 bpf_csum_diff(__be32 *from, u32 from_size, __be32 *to, u32 to_size, __wsum seed)
2195 * Compute a checksum difference, from the raw buffer pointed by
2196 * *from*, of length *from_size* (that must be a multiple of 4),
2197 * towards the raw buffer pointed by *to*, of size *to_size*
2198 * (same remark). An optional *seed* can be added to the value
2199 * (this can be cascaded, the seed may come from a previous call
2202 * This is flexible enough to be used in several ways:
2204 * * With *from_size* == 0, *to_size* > 0 and *seed* set to
2205 * checksum, it can be used when pushing new data.
2206 * * With *from_size* > 0, *to_size* == 0 and *seed* set to
2207 * checksum, it can be used when removing data from a packet.
2208 * * With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it
2209 * can be used to compute a diff. Note that *from_size* and
2210 * *to_size* do not need to be equal.
2212 * This helper can be used in combination with
2213 * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to
2214 * which one can feed in the difference computed with
2215 * **bpf_csum_diff**\ ().
2217 * The checksum result, or a negative error code in case of
2220 * long bpf_skb_get_tunnel_opt(struct sk_buff *skb, void *opt, u32 size)
2222 * Retrieve tunnel options metadata for the packet associated to
2223 * *skb*, and store the raw tunnel option data to the buffer *opt*
2226 * This helper can be used with encapsulation devices that can
2227 * operate in "collect metadata" mode (please refer to the related
2228 * note in the description of **bpf_skb_get_tunnel_key**\ () for
2229 * more details). A particular example where this can be used is
2230 * in combination with the Geneve encapsulation protocol, where it
2231 * allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper)
2232 * and retrieving arbitrary TLVs (Type-Length-Value headers) from
2233 * the eBPF program. This allows for full customization of these
2236 * The size of the option data retrieved.
2238 * long bpf_skb_set_tunnel_opt(struct sk_buff *skb, void *opt, u32 size)
2240 * Set tunnel options metadata for the packet associated to *skb*
2241 * to the option data contained in the raw buffer *opt* of *size*.
2243 * See also the description of the **bpf_skb_get_tunnel_opt**\ ()
2244 * helper for additional information.
2246 * 0 on success, or a negative error in case of failure.
2248 * long bpf_skb_change_proto(struct sk_buff *skb, __be16 proto, u64 flags)
2250 * Change the protocol of the *skb* to *proto*. Currently
2251 * supported are transition from IPv4 to IPv6, and from IPv6 to
2252 * IPv4. The helper takes care of the groundwork for the
2253 * transition, including resizing the socket buffer. The eBPF
2254 * program is expected to fill the new headers, if any, via
2255 * **skb_store_bytes**\ () and to recompute the checksums with
2256 * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\
2257 * (). The main case for this helper is to perform NAT64
2258 * operations out of an eBPF program.
2260 * Internally, the GSO type is marked as dodgy so that headers are
2261 * checked and segments are recalculated by the GSO/GRO engine.
2262 * The size for GSO target is adapted as well.
2264 * All values for *flags* are reserved for future usage, and must
2267 * A call to this helper is susceptible to change the underlying
2268 * packet buffer. Therefore, at load time, all checks on pointers
2269 * previously done by the verifier are invalidated and must be
2270 * performed again, if the helper is used in combination with
2271 * direct packet access.
2273 * 0 on success, or a negative error in case of failure.
2275 * long bpf_skb_change_type(struct sk_buff *skb, u32 type)
2277 * Change the packet type for the packet associated to *skb*. This
2278 * comes down to setting *skb*\ **->pkt_type** to *type*, except
2279 * the eBPF program does not have a write access to *skb*\
2280 * **->pkt_type** beside this helper. Using a helper here allows
2281 * for graceful handling of errors.
2283 * The major use case is to change incoming *skb*s to
2284 * **PACKET_HOST** in a programmatic way instead of having to
2285 * recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for
2288 * Note that *type* only allows certain values. At this time, they
2293 * **PACKET_BROADCAST**
2294 * Send packet to all.
2295 * **PACKET_MULTICAST**
2296 * Send packet to group.
2297 * **PACKET_OTHERHOST**
2298 * Send packet to someone else.
2300 * 0 on success, or a negative error in case of failure.
2302 * long bpf_skb_under_cgroup(struct sk_buff *skb, struct bpf_map *map, u32 index)
2304 * Check whether *skb* is a descendant of the cgroup2 held by
2305 * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
2307 * The return value depends on the result of the test, and can be:
2309 * * 0, if the *skb* failed the cgroup2 descendant test.
2310 * * 1, if the *skb* succeeded the cgroup2 descendant test.
2311 * * A negative error code, if an error occurred.
2313 * u32 bpf_get_hash_recalc(struct sk_buff *skb)
2315 * Retrieve the hash of the packet, *skb*\ **->hash**. If it is
2316 * not set, in particular if the hash was cleared due to mangling,
2317 * recompute this hash. Later accesses to the hash can be done
2318 * directly with *skb*\ **->hash**.
2320 * Calling **bpf_set_hash_invalid**\ (), changing a packet
2321 * prototype with **bpf_skb_change_proto**\ (), or calling
2322 * **bpf_skb_store_bytes**\ () with the
2323 * **BPF_F_INVALIDATE_HASH** are actions susceptible to clear
2324 * the hash and to trigger a new computation for the next call to
2325 * **bpf_get_hash_recalc**\ ().
2329 * u64 bpf_get_current_task(void)
2331 * Get the current task.
2333 * A pointer to the current task struct.
2335 * long bpf_probe_write_user(void *dst, const void *src, u32 len)
2337 * Attempt in a safe way to write *len* bytes from the buffer
2338 * *src* to *dst* in memory. It only works for threads that are in
2339 * user context, and *dst* must be a valid user space address.
2341 * This helper should not be used to implement any kind of
2342 * security mechanism because of TOC-TOU attacks, but rather to
2343 * debug, divert, and manipulate execution of semi-cooperative
2346 * Keep in mind that this feature is meant for experiments, and it
2347 * has a risk of crashing the system and running programs.
2348 * Therefore, when an eBPF program using this helper is attached,
2349 * a warning including PID and process name is printed to kernel
2352 * 0 on success, or a negative error in case of failure.
2354 * long bpf_current_task_under_cgroup(struct bpf_map *map, u32 index)
2356 * Check whether the probe is being run is the context of a given
2357 * subset of the cgroup2 hierarchy. The cgroup2 to test is held by
2358 * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
2360 * The return value depends on the result of the test, and can be:
2362 * * 1, if current task belongs to the cgroup2.
2363 * * 0, if current task does not belong to the cgroup2.
2364 * * A negative error code, if an error occurred.
2366 * long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags)
2368 * Resize (trim or grow) the packet associated to *skb* to the
2369 * new *len*. The *flags* are reserved for future usage, and must
2372 * The basic idea is that the helper performs the needed work to
2373 * change the size of the packet, then the eBPF program rewrites
2374 * the rest via helpers like **bpf_skb_store_bytes**\ (),
2375 * **bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ ()
2376 * and others. This helper is a slow path utility intended for
2377 * replies with control messages. And because it is targeted for
2378 * slow path, the helper itself can afford to be slow: it
2379 * implicitly linearizes, unclones and drops offloads from the
2382 * A call to this helper is susceptible to change the underlying
2383 * packet buffer. Therefore, at load time, all checks on pointers
2384 * previously done by the verifier are invalidated and must be
2385 * performed again, if the helper is used in combination with
2386 * direct packet access.
2388 * 0 on success, or a negative error in case of failure.
2390 * long bpf_skb_pull_data(struct sk_buff *skb, u32 len)
2392 * Pull in non-linear data in case the *skb* is non-linear and not
2393 * all of *len* are part of the linear section. Make *len* bytes
2394 * from *skb* readable and writable. If a zero value is passed for
2395 * *len*, then all bytes in the linear part of *skb* will be made
2396 * readable and writable.
2398 * This helper is only needed for reading and writing with direct
2401 * For direct packet access, testing that offsets to access
2402 * are within packet boundaries (test on *skb*\ **->data_end**) is
2403 * susceptible to fail if offsets are invalid, or if the requested
2404 * data is in non-linear parts of the *skb*. On failure the
2405 * program can just bail out, or in the case of a non-linear
2406 * buffer, use a helper to make the data available. The
2407 * **bpf_skb_load_bytes**\ () helper is a first solution to access
2408 * the data. Another one consists in using **bpf_skb_pull_data**
2409 * to pull in once the non-linear parts, then retesting and
2410 * eventually access the data.
2412 * At the same time, this also makes sure the *skb* is uncloned,
2413 * which is a necessary condition for direct write. As this needs
2414 * to be an invariant for the write part only, the verifier
2415 * detects writes and adds a prologue that is calling
2416 * **bpf_skb_pull_data()** to effectively unclone the *skb* from
2417 * the very beginning in case it is indeed cloned.
2419 * A call to this helper is susceptible to change the underlying
2420 * packet buffer. Therefore, at load time, all checks on pointers
2421 * previously done by the verifier are invalidated and must be
2422 * performed again, if the helper is used in combination with
2423 * direct packet access.
2425 * 0 on success, or a negative error in case of failure.
2427 * s64 bpf_csum_update(struct sk_buff *skb, __wsum csum)
2429 * Add the checksum *csum* into *skb*\ **->csum** in case the
2430 * driver has supplied a checksum for the entire packet into that
2431 * field. Return an error otherwise. This helper is intended to be
2432 * used in combination with **bpf_csum_diff**\ (), in particular
2433 * when the checksum needs to be updated after data has been
2434 * written into the packet through direct packet access.
2436 * The checksum on success, or a negative error code in case of
2439 * void bpf_set_hash_invalid(struct sk_buff *skb)
2441 * Invalidate the current *skb*\ **->hash**. It can be used after
2442 * mangling on headers through direct packet access, in order to
2443 * indicate that the hash is outdated and to trigger a
2444 * recalculation the next time the kernel tries to access this
2445 * hash or when the **bpf_get_hash_recalc**\ () helper is called.
2449 * long bpf_get_numa_node_id(void)
2451 * Return the id of the current NUMA node. The primary use case
2452 * for this helper is the selection of sockets for the local NUMA
2453 * node, when the program is attached to sockets using the
2454 * **SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**),
2455 * but the helper is also available to other eBPF program types,
2456 * similarly to **bpf_get_smp_processor_id**\ ().
2458 * The id of current NUMA node.
2460 * long bpf_skb_change_head(struct sk_buff *skb, u32 len, u64 flags)
2462 * Grows headroom of packet associated to *skb* and adjusts the
2463 * offset of the MAC header accordingly, adding *len* bytes of
2464 * space. It automatically extends and reallocates memory as
2467 * This helper can be used on a layer 3 *skb* to push a MAC header
2468 * for redirection into a layer 2 device.
2470 * All values for *flags* are reserved for future usage, and must
2473 * A call to this helper is susceptible to change the underlying
2474 * packet buffer. Therefore, at load time, all checks on pointers
2475 * previously done by the verifier are invalidated and must be
2476 * performed again, if the helper is used in combination with
2477 * direct packet access.
2479 * 0 on success, or a negative error in case of failure.
2481 * long bpf_xdp_adjust_head(struct xdp_buff *xdp_md, int delta)
2483 * Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that
2484 * it is possible to use a negative value for *delta*. This helper
2485 * can be used to prepare the packet for pushing or popping
2488 * A call to this helper is susceptible to change the underlying
2489 * packet buffer. Therefore, at load time, all checks on pointers
2490 * previously done by the verifier are invalidated and must be
2491 * performed again, if the helper is used in combination with
2492 * direct packet access.
2494 * 0 on success, or a negative error in case of failure.
2496 * long bpf_probe_read_str(void *dst, u32 size, const void *unsafe_ptr)
2498 * Copy a NUL terminated string from an unsafe kernel address
2499 * *unsafe_ptr* to *dst*. See **bpf_probe_read_kernel_str**\ () for
2502 * Generally, use **bpf_probe_read_user_str**\ () or
2503 * **bpf_probe_read_kernel_str**\ () instead.
2505 * On success, the strictly positive length of the string,
2506 * including the trailing NUL character. On error, a negative
2509 * u64 bpf_get_socket_cookie(struct sk_buff *skb)
2511 * If the **struct sk_buff** pointed by *skb* has a known socket,
2512 * retrieve the cookie (generated by the kernel) of this socket.
2513 * If no cookie has been set yet, generate a new cookie. Once
2514 * generated, the socket cookie remains stable for the life of the
2515 * socket. This helper can be useful for monitoring per socket
2516 * networking traffic statistics as it provides a global socket
2517 * identifier that can be assumed unique.
2519 * A 8-byte long unique number on success, or 0 if the socket
2520 * field is missing inside *skb*.
2522 * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx)
2524 * Equivalent to bpf_get_socket_cookie() helper that accepts
2525 * *skb*, but gets socket from **struct bpf_sock_addr** context.
2527 * A 8-byte long unique number.
2529 * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx)
2531 * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts
2532 * *skb*, but gets socket from **struct bpf_sock_ops** context.
2534 * A 8-byte long unique number.
2536 * u64 bpf_get_socket_cookie(struct sock *sk)
2538 * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts
2539 * *sk*, but gets socket from a BTF **struct sock**. This helper
2540 * also works for sleepable programs.
2542 * A 8-byte long unique number or 0 if *sk* is NULL.
2544 * u32 bpf_get_socket_uid(struct sk_buff *skb)
2546 * Get the owner UID of the socked associated to *skb*.
2548 * The owner UID of the socket associated to *skb*. If the socket
2549 * is **NULL**, or if it is not a full socket (i.e. if it is a
2550 * time-wait or a request socket instead), **overflowuid** value
2551 * is returned (note that **overflowuid** might also be the actual
2552 * UID value for the socket).
2554 * long bpf_set_hash(struct sk_buff *skb, u32 hash)
2556 * Set the full hash for *skb* (set the field *skb*\ **->hash**)
2561 * long bpf_setsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen)
2563 * Emulate a call to **setsockopt()** on the socket associated to
2564 * *bpf_socket*, which must be a full socket. The *level* at
2565 * which the option resides and the name *optname* of the option
2566 * must be specified, see **setsockopt(2)** for more information.
2567 * The option value of length *optlen* is pointed by *optval*.
2569 * *bpf_socket* should be one of the following:
2571 * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**.
2572 * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**
2573 * and **BPF_CGROUP_INET6_CONNECT**.
2575 * This helper actually implements a subset of **setsockopt()**.
2576 * It supports the following *level*\ s:
2578 * * **SOL_SOCKET**, which supports the following *optname*\ s:
2579 * **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**,
2580 * **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**,
2581 * **SO_BINDTODEVICE**, **SO_KEEPALIVE**.
2582 * * **IPPROTO_TCP**, which supports the following *optname*\ s:
2583 * **TCP_CONGESTION**, **TCP_BPF_IW**,
2584 * **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**,
2585 * **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**,
2586 * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**.
2587 * * **IPPROTO_IP**, which supports *optname* **IP_TOS**.
2588 * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
2590 * 0 on success, or a negative error in case of failure.
2592 * long bpf_skb_adjust_room(struct sk_buff *skb, s32 len_diff, u32 mode, u64 flags)
2594 * Grow or shrink the room for data in the packet associated to
2595 * *skb* by *len_diff*, and according to the selected *mode*.
2597 * By default, the helper will reset any offloaded checksum
2598 * indicator of the skb to CHECKSUM_NONE. This can be avoided
2599 * by the following flag:
2601 * * **BPF_F_ADJ_ROOM_NO_CSUM_RESET**: Do not reset offloaded
2602 * checksum data of the skb to CHECKSUM_NONE.
2604 * There are two supported modes at this time:
2606 * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer
2607 * (room space is added or removed between the layer 2 and
2610 * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer
2611 * (room space is added or removed between the layer 3 and
2614 * The following flags are supported at this time:
2616 * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size.
2617 * Adjusting mss in this way is not allowed for datagrams.
2619 * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**,
2620 * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**:
2621 * Any new space is reserved to hold a tunnel header.
2622 * Configure skb offsets and other fields accordingly.
2624 * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**,
2625 * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**:
2626 * Use with ENCAP_L3 flags to further specify the tunnel type.
2628 * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*):
2629 * Use with ENCAP_L3/L4 flags to further specify the tunnel
2630 * type; *len* is the length of the inner MAC header.
2632 * * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**:
2633 * Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the
2634 * L2 type as Ethernet.
2636 * A call to this helper is susceptible to change the underlying
2637 * packet buffer. Therefore, at load time, all checks on pointers
2638 * previously done by the verifier are invalidated and must be
2639 * performed again, if the helper is used in combination with
2640 * direct packet access.
2642 * 0 on success, or a negative error in case of failure.
2644 * long bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags)
2646 * Redirect the packet to the endpoint referenced by *map* at
2647 * index *key*. Depending on its type, this *map* can contain
2648 * references to net devices (for forwarding packets through other
2649 * ports), or to CPUs (for redirecting XDP frames to another CPU;
2650 * but this is only implemented for native XDP (with driver
2651 * support) as of this writing).
2653 * The lower two bits of *flags* are used as the return code if
2654 * the map lookup fails. This is so that the return value can be
2655 * one of the XDP program return codes up to **XDP_TX**, as chosen
2656 * by the caller. The higher bits of *flags* can be set to
2657 * BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS as defined below.
2659 * With BPF_F_BROADCAST the packet will be broadcasted to all the
2660 * interfaces in the map, with BPF_F_EXCLUDE_INGRESS the ingress
2661 * interface will be excluded when do broadcasting.
2663 * See also **bpf_redirect**\ (), which only supports redirecting
2664 * to an ifindex, but doesn't require a map to do so.
2666 * **XDP_REDIRECT** on success, or the value of the two lower bits
2667 * of the *flags* argument on error.
2669 * long bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags)
2671 * Redirect the packet to the socket referenced by *map* (of type
2672 * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
2673 * egress interfaces can be used for redirection. The
2674 * **BPF_F_INGRESS** value in *flags* is used to make the
2675 * distinction (ingress path is selected if the flag is present,
2676 * egress path otherwise). This is the only flag supported for now.
2678 * **SK_PASS** on success, or **SK_DROP** on error.
2680 * long bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
2682 * Add an entry to, or update a *map* referencing sockets. The
2683 * *skops* is used as a new value for the entry associated to
2684 * *key*. *flags* is one of:
2687 * The entry for *key* must not exist in the map.
2689 * The entry for *key* must already exist in the map.
2691 * No condition on the existence of the entry for *key*.
2693 * If the *map* has eBPF programs (parser and verdict), those will
2694 * be inherited by the socket being added. If the socket is
2695 * already attached to eBPF programs, this results in an error.
2697 * 0 on success, or a negative error in case of failure.
2699 * long bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta)
2701 * Adjust the address pointed by *xdp_md*\ **->data_meta** by
2702 * *delta* (which can be positive or negative). Note that this
2703 * operation modifies the address stored in *xdp_md*\ **->data**,
2704 * so the latter must be loaded only after the helper has been
2707 * The use of *xdp_md*\ **->data_meta** is optional and programs
2708 * are not required to use it. The rationale is that when the
2709 * packet is processed with XDP (e.g. as DoS filter), it is
2710 * possible to push further meta data along with it before passing
2711 * to the stack, and to give the guarantee that an ingress eBPF
2712 * program attached as a TC classifier on the same device can pick
2713 * this up for further post-processing. Since TC works with socket
2714 * buffers, it remains possible to set from XDP the **mark** or
2715 * **priority** pointers, or other pointers for the socket buffer.
2716 * Having this scratch space generic and programmable allows for
2717 * more flexibility as the user is free to store whatever meta
2720 * A call to this helper is susceptible to change the underlying
2721 * packet buffer. Therefore, at load time, all checks on pointers
2722 * previously done by the verifier are invalidated and must be
2723 * performed again, if the helper is used in combination with
2724 * direct packet access.
2726 * 0 on success, or a negative error in case of failure.
2728 * long bpf_perf_event_read_value(struct bpf_map *map, u64 flags, struct bpf_perf_event_value *buf, u32 buf_size)
2730 * Read the value of a perf event counter, and store it into *buf*
2731 * of size *buf_size*. This helper relies on a *map* of type
2732 * **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event
2733 * counter is selected when *map* is updated with perf event file
2734 * descriptors. The *map* is an array whose size is the number of
2735 * available CPUs, and each cell contains a value relative to one
2736 * CPU. The value to retrieve is indicated by *flags*, that
2737 * contains the index of the CPU to look up, masked with
2738 * **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
2739 * **BPF_F_CURRENT_CPU** to indicate that the value for the
2740 * current CPU should be retrieved.
2742 * This helper behaves in a way close to
2743 * **bpf_perf_event_read**\ () helper, save that instead of
2744 * just returning the value observed, it fills the *buf*
2745 * structure. This allows for additional data to be retrieved: in
2746 * particular, the enabled and running times (in *buf*\
2747 * **->enabled** and *buf*\ **->running**, respectively) are
2748 * copied. In general, **bpf_perf_event_read_value**\ () is
2749 * recommended over **bpf_perf_event_read**\ (), which has some
2750 * ABI issues and provides fewer functionalities.
2752 * These values are interesting, because hardware PMU (Performance
2753 * Monitoring Unit) counters are limited resources. When there are
2754 * more PMU based perf events opened than available counters,
2755 * kernel will multiplex these events so each event gets certain
2756 * percentage (but not all) of the PMU time. In case that
2757 * multiplexing happens, the number of samples or counter value
2758 * will not reflect the case compared to when no multiplexing
2759 * occurs. This makes comparison between different runs difficult.
2760 * Typically, the counter value should be normalized before
2761 * comparing to other experiments. The usual normalization is done
2766 * normalized_counter = counter * t_enabled / t_running
2768 * Where t_enabled is the time enabled for event and t_running is
2769 * the time running for event since last normalization. The
2770 * enabled and running times are accumulated since the perf event
2771 * open. To achieve scaling factor between two invocations of an
2772 * eBPF program, users can use CPU id as the key (which is
2773 * typical for perf array usage model) to remember the previous
2774 * value and do the calculation inside the eBPF program.
2776 * 0 on success, or a negative error in case of failure.
2778 * long bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size)
2780 * For en eBPF program attached to a perf event, retrieve the
2781 * value of the event counter associated to *ctx* and store it in
2782 * the structure pointed by *buf* and of size *buf_size*. Enabled
2783 * and running times are also stored in the structure (see
2784 * description of helper **bpf_perf_event_read_value**\ () for
2787 * 0 on success, or a negative error in case of failure.
2789 * long bpf_getsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen)
2791 * Emulate a call to **getsockopt()** on the socket associated to
2792 * *bpf_socket*, which must be a full socket. The *level* at
2793 * which the option resides and the name *optname* of the option
2794 * must be specified, see **getsockopt(2)** for more information.
2795 * The retrieved value is stored in the structure pointed by
2796 * *opval* and of length *optlen*.
2798 * *bpf_socket* should be one of the following:
2800 * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**.
2801 * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**
2802 * and **BPF_CGROUP_INET6_CONNECT**.
2804 * This helper actually implements a subset of **getsockopt()**.
2805 * It supports the following *level*\ s:
2807 * * **IPPROTO_TCP**, which supports *optname*
2808 * **TCP_CONGESTION**.
2809 * * **IPPROTO_IP**, which supports *optname* **IP_TOS**.
2810 * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
2812 * 0 on success, or a negative error in case of failure.
2814 * long bpf_override_return(struct pt_regs *regs, u64 rc)
2816 * Used for error injection, this helper uses kprobes to override
2817 * the return value of the probed function, and to set it to *rc*.
2818 * The first argument is the context *regs* on which the kprobe
2821 * This helper works by setting the PC (program counter)
2822 * to an override function which is run in place of the original
2823 * probed function. This means the probed function is not run at
2824 * all. The replacement function just returns with the required
2827 * This helper has security implications, and thus is subject to
2828 * restrictions. It is only available if the kernel was compiled
2829 * with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration
2830 * option, and in this case it only works on functions tagged with
2831 * **ALLOW_ERROR_INJECTION** in the kernel code.
2833 * Also, the helper is only available for the architectures having
2834 * the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing,
2835 * x86 architecture is the only one to support this feature.
2839 * long bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval)
2841 * Attempt to set the value of the **bpf_sock_ops_cb_flags** field
2842 * for the full TCP socket associated to *bpf_sock_ops* to
2845 * The primary use of this field is to determine if there should
2846 * be calls to eBPF programs of type
2847 * **BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP
2848 * code. A program of the same type can change its value, per
2849 * connection and as necessary, when the connection is
2850 * established. This field is directly accessible for reading, but
2851 * this helper must be used for updates in order to return an
2852 * error if an eBPF program tries to set a callback that is not
2853 * supported in the current kernel.
2855 * *argval* is a flag array which can combine these flags:
2857 * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out)
2858 * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission)
2859 * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change)
2860 * * **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT)
2862 * Therefore, this function can be used to clear a callback flag by
2863 * setting the appropriate bit to zero. e.g. to disable the RTO
2866 * **bpf_sock_ops_cb_flags_set(bpf_sock,**
2867 * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)**
2869 * Here are some examples of where one could call such eBPF
2873 * * When a packet is retransmitted.
2874 * * When the connection terminates.
2875 * * When a packet is sent.
2876 * * When a packet is received.
2878 * Code **-EINVAL** if the socket is not a full TCP socket;
2879 * otherwise, a positive number containing the bits that could not
2880 * be set is returned (which comes down to 0 if all bits were set
2883 * long bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags)
2885 * This helper is used in programs implementing policies at the
2886 * socket level. If the message *msg* is allowed to pass (i.e. if
2887 * the verdict eBPF program returns **SK_PASS**), redirect it to
2888 * the socket referenced by *map* (of type
2889 * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
2890 * egress interfaces can be used for redirection. The
2891 * **BPF_F_INGRESS** value in *flags* is used to make the
2892 * distinction (ingress path is selected if the flag is present,
2893 * egress path otherwise). This is the only flag supported for now.
2895 * **SK_PASS** on success, or **SK_DROP** on error.
2897 * long bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes)
2899 * For socket policies, apply the verdict of the eBPF program to
2900 * the next *bytes* (number of bytes) of message *msg*.
2902 * For example, this helper can be used in the following cases:
2904 * * A single **sendmsg**\ () or **sendfile**\ () system call
2905 * contains multiple logical messages that the eBPF program is
2906 * supposed to read and for which it should apply a verdict.
2907 * * An eBPF program only cares to read the first *bytes* of a
2908 * *msg*. If the message has a large payload, then setting up
2909 * and calling the eBPF program repeatedly for all bytes, even
2910 * though the verdict is already known, would create unnecessary
2913 * When called from within an eBPF program, the helper sets a
2914 * counter internal to the BPF infrastructure, that is used to
2915 * apply the last verdict to the next *bytes*. If *bytes* is
2916 * smaller than the current data being processed from a
2917 * **sendmsg**\ () or **sendfile**\ () system call, the first
2918 * *bytes* will be sent and the eBPF program will be re-run with
2919 * the pointer for start of data pointing to byte number *bytes*
2920 * **+ 1**. If *bytes* is larger than the current data being
2921 * processed, then the eBPF verdict will be applied to multiple
2922 * **sendmsg**\ () or **sendfile**\ () calls until *bytes* are
2925 * Note that if a socket closes with the internal counter holding
2926 * a non-zero value, this is not a problem because data is not
2927 * being buffered for *bytes* and is sent as it is received.
2931 * long bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes)
2933 * For socket policies, prevent the execution of the verdict eBPF
2934 * program for message *msg* until *bytes* (byte number) have been
2937 * This can be used when one needs a specific number of bytes
2938 * before a verdict can be assigned, even if the data spans
2939 * multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme
2940 * case would be a user calling **sendmsg**\ () repeatedly with
2941 * 1-byte long message segments. Obviously, this is bad for
2942 * performance, but it is still valid. If the eBPF program needs
2943 * *bytes* bytes to validate a header, this helper can be used to
2944 * prevent the eBPF program to be called again until *bytes* have
2949 * long bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags)
2951 * For socket policies, pull in non-linear data from user space
2952 * for *msg* and set pointers *msg*\ **->data** and *msg*\
2953 * **->data_end** to *start* and *end* bytes offsets into *msg*,
2956 * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
2957 * *msg* it can only parse data that the (**data**, **data_end**)
2958 * pointers have already consumed. For **sendmsg**\ () hooks this
2959 * is likely the first scatterlist element. But for calls relying
2960 * on the **sendpage** handler (e.g. **sendfile**\ ()) this will
2961 * be the range (**0**, **0**) because the data is shared with
2962 * user space and by default the objective is to avoid allowing
2963 * user space to modify data while (or after) eBPF verdict is
2964 * being decided. This helper can be used to pull in data and to
2965 * set the start and end pointer to given values. Data will be
2966 * copied if necessary (i.e. if data was not linear and if start
2967 * and end pointers do not point to the same chunk).
2969 * A call to this helper is susceptible to change the underlying
2970 * packet buffer. Therefore, at load time, all checks on pointers
2971 * previously done by the verifier are invalidated and must be
2972 * performed again, if the helper is used in combination with
2973 * direct packet access.
2975 * All values for *flags* are reserved for future usage, and must
2978 * 0 on success, or a negative error in case of failure.
2980 * long bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len)
2982 * Bind the socket associated to *ctx* to the address pointed by
2983 * *addr*, of length *addr_len*. This allows for making outgoing
2984 * connection from the desired IP address, which can be useful for
2985 * example when all processes inside a cgroup should use one
2986 * single IP address on a host that has multiple IP configured.
2988 * This helper works for IPv4 and IPv6, TCP and UDP sockets. The
2989 * domain (*addr*\ **->sa_family**) must be **AF_INET** (or
2990 * **AF_INET6**). It's advised to pass zero port (**sin_port**
2991 * or **sin6_port**) which triggers IP_BIND_ADDRESS_NO_PORT-like
2992 * behavior and lets the kernel efficiently pick up an unused
2993 * port as long as 4-tuple is unique. Passing non-zero port might
2994 * lead to degraded performance.
2996 * 0 on success, or a negative error in case of failure.
2998 * long bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta)
3000 * Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is
3001 * possible to both shrink and grow the packet tail.
3002 * Shrink done via *delta* being a negative integer.
3004 * A call to this helper is susceptible to change the underlying
3005 * packet buffer. Therefore, at load time, all checks on pointers
3006 * previously done by the verifier are invalidated and must be
3007 * performed again, if the helper is used in combination with
3008 * direct packet access.
3010 * 0 on success, or a negative error in case of failure.
3012 * long bpf_skb_get_xfrm_state(struct sk_buff *skb, u32 index, struct bpf_xfrm_state *xfrm_state, u32 size, u64 flags)
3014 * Retrieve the XFRM state (IP transform framework, see also
3015 * **ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*.
3017 * The retrieved value is stored in the **struct bpf_xfrm_state**
3018 * pointed by *xfrm_state* and of length *size*.
3020 * All values for *flags* are reserved for future usage, and must
3023 * This helper is available only if the kernel was compiled with
3024 * **CONFIG_XFRM** configuration option.
3026 * 0 on success, or a negative error in case of failure.
3028 * long bpf_get_stack(void *ctx, void *buf, u32 size, u64 flags)
3030 * Return a user or a kernel stack in bpf program provided buffer.
3031 * To achieve this, the helper needs *ctx*, which is a pointer
3032 * to the context on which the tracing program is executed.
3033 * To store the stacktrace, the bpf program provides *buf* with
3034 * a nonnegative *size*.
3036 * The last argument, *flags*, holds the number of stack frames to
3037 * skip (from 0 to 255), masked with
3038 * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
3039 * the following flags:
3041 * **BPF_F_USER_STACK**
3042 * Collect a user space stack instead of a kernel stack.
3043 * **BPF_F_USER_BUILD_ID**
3044 * Collect (build_id, file_offset) instead of ips for user
3045 * stack, only valid if **BPF_F_USER_STACK** is also
3048 * *file_offset* is an offset relative to the beginning
3049 * of the executable or shared object file backing the vma
3050 * which the *ip* falls in. It is *not* an offset relative
3051 * to that object's base address. Accordingly, it must be
3052 * adjusted by adding (sh_addr - sh_offset), where
3053 * sh_{addr,offset} correspond to the executable section
3054 * containing *file_offset* in the object, for comparisons
3055 * to symbols' st_value to be valid.
3057 * **bpf_get_stack**\ () can collect up to
3058 * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
3059 * to sufficient large buffer size. Note that
3060 * this limit can be controlled with the **sysctl** program, and
3061 * that it should be manually increased in order to profile long
3062 * user stacks (such as stacks for Java programs). To do so, use:
3066 * # sysctl kernel.perf_event_max_stack=<new value>
3068 * The non-negative copied *buf* length equal to or less than
3069 * *size* on success, or a negative error in case of failure.
3071 * long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header)
3073 * This helper is similar to **bpf_skb_load_bytes**\ () in that
3074 * it provides an easy way to load *len* bytes from *offset*
3075 * from the packet associated to *skb*, into the buffer pointed
3076 * by *to*. The difference to **bpf_skb_load_bytes**\ () is that
3077 * a fifth argument *start_header* exists in order to select a
3078 * base offset to start from. *start_header* can be one of:
3080 * **BPF_HDR_START_MAC**
3081 * Base offset to load data from is *skb*'s mac header.
3082 * **BPF_HDR_START_NET**
3083 * Base offset to load data from is *skb*'s network header.
3085 * In general, "direct packet access" is the preferred method to
3086 * access packet data, however, this helper is in particular useful
3087 * in socket filters where *skb*\ **->data** does not always point
3088 * to the start of the mac header and where "direct packet access"
3091 * 0 on success, or a negative error in case of failure.
3093 * long bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags)
3095 * Do FIB lookup in kernel tables using parameters in *params*.
3096 * If lookup is successful and result shows packet is to be
3097 * forwarded, the neighbor tables are searched for the nexthop.
3098 * If successful (ie., FIB lookup shows forwarding and nexthop
3099 * is resolved), the nexthop address is returned in ipv4_dst
3100 * or ipv6_dst based on family, smac is set to mac address of
3101 * egress device, dmac is set to nexthop mac address, rt_metric
3102 * is set to metric from route (IPv4/IPv6 only), and ifindex
3103 * is set to the device index of the nexthop from the FIB lookup.
3105 * *plen* argument is the size of the passed in struct.
3106 * *flags* argument can be a combination of one or more of the
3109 * **BPF_FIB_LOOKUP_DIRECT**
3110 * Do a direct table lookup vs full lookup using FIB
3112 * **BPF_FIB_LOOKUP_TBID**
3113 * Used with BPF_FIB_LOOKUP_DIRECT.
3114 * Use the routing table ID present in *params*->tbid
3115 * for the fib lookup.
3116 * **BPF_FIB_LOOKUP_OUTPUT**
3117 * Perform lookup from an egress perspective (default is
3119 * **BPF_FIB_LOOKUP_SKIP_NEIGH**
3120 * Skip the neighbour table lookup. *params*->dmac
3121 * and *params*->smac will not be set as output. A common
3122 * use case is to call **bpf_redirect_neigh**\ () after
3123 * doing **bpf_fib_lookup**\ ().
3124 * **BPF_FIB_LOOKUP_SRC**
3125 * Derive and set source IP addr in *params*->ipv{4,6}_src
3126 * for the nexthop. If the src addr cannot be derived,
3127 * **BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this
3128 * case, *params*->dmac and *params*->smac are not set either.
3130 * *ctx* is either **struct xdp_md** for XDP programs or
3131 * **struct sk_buff** tc cls_act programs.
3133 * * < 0 if any input argument is invalid
3134 * * 0 on success (packet is forwarded, nexthop neighbor exists)
3135 * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the
3136 * packet is not forwarded or needs assist from full stack
3138 * If lookup fails with BPF_FIB_LKUP_RET_FRAG_NEEDED, then the MTU
3139 * was exceeded and output params->mtu_result contains the MTU.
3141 * long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
3143 * Add an entry to, or update a sockhash *map* referencing sockets.
3144 * The *skops* is used as a new value for the entry associated to
3145 * *key*. *flags* is one of:
3148 * The entry for *key* must not exist in the map.
3150 * The entry for *key* must already exist in the map.
3152 * No condition on the existence of the entry for *key*.
3154 * If the *map* has eBPF programs (parser and verdict), those will
3155 * be inherited by the socket being added. If the socket is
3156 * already attached to eBPF programs, this results in an error.
3158 * 0 on success, or a negative error in case of failure.
3160 * long bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags)
3162 * This helper is used in programs implementing policies at the
3163 * socket level. If the message *msg* is allowed to pass (i.e. if
3164 * the verdict eBPF program returns **SK_PASS**), redirect it to
3165 * the socket referenced by *map* (of type
3166 * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
3167 * egress interfaces can be used for redirection. The
3168 * **BPF_F_INGRESS** value in *flags* is used to make the
3169 * distinction (ingress path is selected if the flag is present,
3170 * egress path otherwise). This is the only flag supported for now.
3172 * **SK_PASS** on success, or **SK_DROP** on error.
3174 * long bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags)
3176 * This helper is used in programs implementing policies at the
3177 * skb socket level. If the sk_buff *skb* is allowed to pass (i.e.
3178 * if the verdict eBPF program returns **SK_PASS**), redirect it
3179 * to the socket referenced by *map* (of type
3180 * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
3181 * egress interfaces can be used for redirection. The
3182 * **BPF_F_INGRESS** value in *flags* is used to make the
3183 * distinction (ingress path is selected if the flag is present,
3184 * egress otherwise). This is the only flag supported for now.
3186 * **SK_PASS** on success, or **SK_DROP** on error.
3188 * long bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len)
3190 * Encapsulate the packet associated to *skb* within a Layer 3
3191 * protocol header. This header is provided in the buffer at
3192 * address *hdr*, with *len* its size in bytes. *type* indicates
3193 * the protocol of the header and can be one of:
3195 * **BPF_LWT_ENCAP_SEG6**
3196 * IPv6 encapsulation with Segment Routing Header
3197 * (**struct ipv6_sr_hdr**). *hdr* only contains the SRH,
3198 * the IPv6 header is computed by the kernel.
3199 * **BPF_LWT_ENCAP_SEG6_INLINE**
3200 * Only works if *skb* contains an IPv6 packet. Insert a
3201 * Segment Routing Header (**struct ipv6_sr_hdr**) inside
3203 * **BPF_LWT_ENCAP_IP**
3204 * IP encapsulation (GRE/GUE/IPIP/etc). The outer header
3205 * must be IPv4 or IPv6, followed by zero or more
3206 * additional headers, up to **LWT_BPF_MAX_HEADROOM**
3207 * total bytes in all prepended headers. Please note that
3208 * if **skb_is_gso**\ (*skb*) is true, no more than two
3209 * headers can be prepended, and the inner header, if
3210 * present, should be either GRE or UDP/GUE.
3212 * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs
3213 * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can
3214 * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and
3215 * **BPF_PROG_TYPE_LWT_XMIT**.
3217 * A call to this helper is susceptible to change the underlying
3218 * packet buffer. Therefore, at load time, all checks on pointers
3219 * previously done by the verifier are invalidated and must be
3220 * performed again, if the helper is used in combination with
3221 * direct packet access.
3223 * 0 on success, or a negative error in case of failure.
3225 * long bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len)
3227 * Store *len* bytes from address *from* into the packet
3228 * associated to *skb*, at *offset*. Only the flags, tag and TLVs
3229 * inside the outermost IPv6 Segment Routing Header can be
3230 * modified through this helper.
3232 * A call to this helper is susceptible to change the underlying
3233 * packet buffer. Therefore, at load time, all checks on pointers
3234 * previously done by the verifier are invalidated and must be
3235 * performed again, if the helper is used in combination with
3236 * direct packet access.
3238 * 0 on success, or a negative error in case of failure.
3240 * long bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta)
3242 * Adjust the size allocated to TLVs in the outermost IPv6
3243 * Segment Routing Header contained in the packet associated to
3244 * *skb*, at position *offset* by *delta* bytes. Only offsets
3245 * after the segments are accepted. *delta* can be as well
3246 * positive (growing) as negative (shrinking).
3248 * A call to this helper is susceptible to change the underlying
3249 * packet buffer. Therefore, at load time, all checks on pointers
3250 * previously done by the verifier are invalidated and must be
3251 * performed again, if the helper is used in combination with
3252 * direct packet access.
3254 * 0 on success, or a negative error in case of failure.
3256 * long bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len)
3258 * Apply an IPv6 Segment Routing action of type *action* to the
3259 * packet associated to *skb*. Each action takes a parameter
3260 * contained at address *param*, and of length *param_len* bytes.
3261 * *action* can be one of:
3263 * **SEG6_LOCAL_ACTION_END_X**
3264 * End.X action: Endpoint with Layer-3 cross-connect.
3265 * Type of *param*: **struct in6_addr**.
3266 * **SEG6_LOCAL_ACTION_END_T**
3267 * End.T action: Endpoint with specific IPv6 table lookup.
3268 * Type of *param*: **int**.
3269 * **SEG6_LOCAL_ACTION_END_B6**
3270 * End.B6 action: Endpoint bound to an SRv6 policy.
3271 * Type of *param*: **struct ipv6_sr_hdr**.
3272 * **SEG6_LOCAL_ACTION_END_B6_ENCAP**
3273 * End.B6.Encap action: Endpoint bound to an SRv6
3274 * encapsulation policy.
3275 * Type of *param*: **struct ipv6_sr_hdr**.
3277 * A call to this helper is susceptible to change the underlying
3278 * packet buffer. Therefore, at load time, all checks on pointers
3279 * previously done by the verifier are invalidated and must be
3280 * performed again, if the helper is used in combination with
3281 * direct packet access.
3283 * 0 on success, or a negative error in case of failure.
3285 * long bpf_rc_repeat(void *ctx)
3287 * This helper is used in programs implementing IR decoding, to
3288 * report a successfully decoded repeat key message. This delays
3289 * the generation of a key up event for previously generated
3292 * Some IR protocols like NEC have a special IR message for
3293 * repeating last button, for when a button is held down.
3295 * The *ctx* should point to the lirc sample as passed into
3298 * This helper is only available is the kernel was compiled with
3299 * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
3304 * long bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle)
3306 * This helper is used in programs implementing IR decoding, to
3307 * report a successfully decoded key press with *scancode*,
3308 * *toggle* value in the given *protocol*. The scancode will be
3309 * translated to a keycode using the rc keymap, and reported as
3310 * an input key down event. After a period a key up event is
3311 * generated. This period can be extended by calling either
3312 * **bpf_rc_keydown**\ () again with the same values, or calling
3313 * **bpf_rc_repeat**\ ().
3315 * Some protocols include a toggle bit, in case the button was
3316 * released and pressed again between consecutive scancodes.
3318 * The *ctx* should point to the lirc sample as passed into
3321 * The *protocol* is the decoded protocol number (see
3322 * **enum rc_proto** for some predefined values).
3324 * This helper is only available is the kernel was compiled with
3325 * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
3330 * u64 bpf_skb_cgroup_id(struct sk_buff *skb)
3332 * Return the cgroup v2 id of the socket associated with the *skb*.
3333 * This is roughly similar to the **bpf_get_cgroup_classid**\ ()
3334 * helper for cgroup v1 by providing a tag resp. identifier that
3335 * can be matched on or used for map lookups e.g. to implement
3336 * policy. The cgroup v2 id of a given path in the hierarchy is
3337 * exposed in user space through the f_handle API in order to get
3338 * to the same 64-bit id.
3340 * This helper can be used on TC egress path, but not on ingress,
3341 * and is available only if the kernel was compiled with the
3342 * **CONFIG_SOCK_CGROUP_DATA** configuration option.
3344 * The id is returned or 0 in case the id could not be retrieved.
3346 * u64 bpf_get_current_cgroup_id(void)
3348 * Get the current cgroup id based on the cgroup within which
3349 * the current task is running.
3351 * A 64-bit integer containing the current cgroup id based
3352 * on the cgroup within which the current task is running.
3354 * void *bpf_get_local_storage(void *map, u64 flags)
3356 * Get the pointer to the local storage area.
3357 * The type and the size of the local storage is defined
3358 * by the *map* argument.
3359 * The *flags* meaning is specific for each map type,
3360 * and has to be 0 for cgroup local storage.
3362 * Depending on the BPF program type, a local storage area
3363 * can be shared between multiple instances of the BPF program,
3364 * running simultaneously.
3366 * A user should care about the synchronization by himself.
3367 * For example, by using the **BPF_ATOMIC** instructions to alter
3370 * A pointer to the local storage area.
3372 * long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags)
3374 * Select a **SO_REUSEPORT** socket from a
3375 * **BPF_MAP_TYPE_REUSEPORT_SOCKARRAY** *map*.
3376 * It checks the selected socket is matching the incoming
3377 * request in the socket buffer.
3379 * 0 on success, or a negative error in case of failure.
3381 * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level)
3383 * Return id of cgroup v2 that is ancestor of cgroup associated
3384 * with the *skb* at the *ancestor_level*. The root cgroup is at
3385 * *ancestor_level* zero and each step down the hierarchy
3386 * increments the level. If *ancestor_level* == level of cgroup
3387 * associated with *skb*, then return value will be same as that
3388 * of **bpf_skb_cgroup_id**\ ().
3390 * The helper is useful to implement policies based on cgroups
3391 * that are upper in hierarchy than immediate cgroup associated
3394 * The format of returned id and helper limitations are same as in
3395 * **bpf_skb_cgroup_id**\ ().
3397 * The id is returned or 0 in case the id could not be retrieved.
3399 * struct bpf_sock *bpf_sk_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags)
3401 * Look for TCP socket matching *tuple*, optionally in a child
3402 * network namespace *netns*. The return value must be checked,
3403 * and if non-**NULL**, released via **bpf_sk_release**\ ().
3405 * The *ctx* should point to the context of the program, such as
3406 * the skb or socket (depending on the hook in use). This is used
3407 * to determine the base network namespace for the lookup.
3409 * *tuple_size* must be one of:
3411 * **sizeof**\ (*tuple*\ **->ipv4**)
3412 * Look for an IPv4 socket.
3413 * **sizeof**\ (*tuple*\ **->ipv6**)
3414 * Look for an IPv6 socket.
3416 * If the *netns* is a negative signed 32-bit integer, then the
3417 * socket lookup table in the netns associated with the *ctx*
3418 * will be used. For the TC hooks, this is the netns of the device
3419 * in the skb. For socket hooks, this is the netns of the socket.
3420 * If *netns* is any other signed 32-bit value greater than or
3421 * equal to zero then it specifies the ID of the netns relative to
3422 * the netns associated with the *ctx*. *netns* values beyond the
3423 * range of 32-bit integers are reserved for future use.
3425 * All values for *flags* are reserved for future usage, and must
3428 * This helper is available only if the kernel was compiled with
3429 * **CONFIG_NET** configuration option.
3431 * Pointer to **struct bpf_sock**, or **NULL** in case of failure.
3432 * For sockets with reuseport option, the **struct bpf_sock**
3433 * result is from *reuse*\ **->socks**\ [] using the hash of the
3436 * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags)
3438 * Look for UDP socket matching *tuple*, optionally in a child
3439 * network namespace *netns*. The return value must be checked,
3440 * and if non-**NULL**, released via **bpf_sk_release**\ ().
3442 * The *ctx* should point to the context of the program, such as
3443 * the skb or socket (depending on the hook in use). This is used
3444 * to determine the base network namespace for the lookup.
3446 * *tuple_size* must be one of:
3448 * **sizeof**\ (*tuple*\ **->ipv4**)
3449 * Look for an IPv4 socket.
3450 * **sizeof**\ (*tuple*\ **->ipv6**)
3451 * Look for an IPv6 socket.
3453 * If the *netns* is a negative signed 32-bit integer, then the
3454 * socket lookup table in the netns associated with the *ctx*
3455 * will be used. For the TC hooks, this is the netns of the device
3456 * in the skb. For socket hooks, this is the netns of the socket.
3457 * If *netns* is any other signed 32-bit value greater than or
3458 * equal to zero then it specifies the ID of the netns relative to
3459 * the netns associated with the *ctx*. *netns* values beyond the
3460 * range of 32-bit integers are reserved for future use.
3462 * All values for *flags* are reserved for future usage, and must
3465 * This helper is available only if the kernel was compiled with
3466 * **CONFIG_NET** configuration option.
3468 * Pointer to **struct bpf_sock**, or **NULL** in case of failure.
3469 * For sockets with reuseport option, the **struct bpf_sock**
3470 * result is from *reuse*\ **->socks**\ [] using the hash of the
3473 * long bpf_sk_release(void *sock)
3475 * Release the reference held by *sock*. *sock* must be a
3476 * non-**NULL** pointer that was returned from
3477 * **bpf_sk_lookup_xxx**\ ().
3479 * 0 on success, or a negative error in case of failure.
3481 * long bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags)
3483 * Push an element *value* in *map*. *flags* is one of:
3486 * If the queue/stack is full, the oldest element is
3487 * removed to make room for this.
3489 * 0 on success, or a negative error in case of failure.
3491 * long bpf_map_pop_elem(struct bpf_map *map, void *value)
3493 * Pop an element from *map*.
3495 * 0 on success, or a negative error in case of failure.
3497 * long bpf_map_peek_elem(struct bpf_map *map, void *value)
3499 * Get an element from *map* without removing it.
3501 * 0 on success, or a negative error in case of failure.
3503 * long bpf_msg_push_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags)
3505 * For socket policies, insert *len* bytes into *msg* at offset
3508 * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
3509 * *msg* it may want to insert metadata or options into the *msg*.
3510 * This can later be read and used by any of the lower layer BPF
3513 * This helper may fail if under memory pressure (a malloc
3514 * fails) in these cases BPF programs will get an appropriate
3515 * error and BPF programs will need to handle them.
3517 * 0 on success, or a negative error in case of failure.
3519 * long bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags)
3521 * Will remove *len* bytes from a *msg* starting at byte *start*.
3522 * This may result in **ENOMEM** errors under certain situations if
3523 * an allocation and copy are required due to a full ring buffer.
3524 * However, the helper will try to avoid doing the allocation
3525 * if possible. Other errors can occur if input parameters are
3526 * invalid either due to *start* byte not being valid part of *msg*
3527 * payload and/or *pop* value being to large.
3529 * 0 on success, or a negative error in case of failure.
3531 * long bpf_rc_pointer_rel(void *ctx, s32 rel_x, s32 rel_y)
3533 * This helper is used in programs implementing IR decoding, to
3534 * report a successfully decoded pointer movement.
3536 * The *ctx* should point to the lirc sample as passed into
3539 * This helper is only available is the kernel was compiled with
3540 * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
3545 * long bpf_spin_lock(struct bpf_spin_lock *lock)
3547 * Acquire a spinlock represented by the pointer *lock*, which is
3548 * stored as part of a value of a map. Taking the lock allows to
3549 * safely update the rest of the fields in that value. The
3550 * spinlock can (and must) later be released with a call to
3551 * **bpf_spin_unlock**\ (\ *lock*\ ).
3553 * Spinlocks in BPF programs come with a number of restrictions
3556 * * **bpf_spin_lock** objects are only allowed inside maps of
3557 * types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this
3558 * list could be extended in the future).
3559 * * BTF description of the map is mandatory.
3560 * * The BPF program can take ONE lock at a time, since taking two
3561 * or more could cause dead locks.
3562 * * Only one **struct bpf_spin_lock** is allowed per map element.
3563 * * When the lock is taken, calls (either BPF to BPF or helpers)
3565 * * The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not
3566 * allowed inside a spinlock-ed region.
3567 * * The BPF program MUST call **bpf_spin_unlock**\ () to release
3568 * the lock, on all execution paths, before it returns.
3569 * * The BPF program can access **struct bpf_spin_lock** only via
3570 * the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ ()
3571 * helpers. Loading or storing data into the **struct
3572 * bpf_spin_lock** *lock*\ **;** field of a map is not allowed.
3573 * * To use the **bpf_spin_lock**\ () helper, the BTF description
3574 * of the map value must be a struct and have **struct
3575 * bpf_spin_lock** *anyname*\ **;** field at the top level.
3576 * Nested lock inside another struct is not allowed.
3577 * * The **struct bpf_spin_lock** *lock* field in a map value must
3578 * be aligned on a multiple of 4 bytes in that value.
3579 * * Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy
3580 * the **bpf_spin_lock** field to user space.
3581 * * Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from
3582 * a BPF program, do not update the **bpf_spin_lock** field.
3583 * * **bpf_spin_lock** cannot be on the stack or inside a
3584 * networking packet (it can only be inside of a map values).
3585 * * **bpf_spin_lock** is available to root only.
3586 * * Tracing programs and socket filter programs cannot use
3587 * **bpf_spin_lock**\ () due to insufficient preemption checks
3588 * (but this may change in the future).
3589 * * **bpf_spin_lock** is not allowed in inner maps of map-in-map.
3593 * long bpf_spin_unlock(struct bpf_spin_lock *lock)
3595 * Release the *lock* previously locked by a call to
3596 * **bpf_spin_lock**\ (\ *lock*\ ).
3600 * struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk)
3602 * This helper gets a **struct bpf_sock** pointer such
3603 * that all the fields in this **bpf_sock** can be accessed.
3605 * A **struct bpf_sock** pointer on success, or **NULL** in
3608 * struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk)
3610 * This helper gets a **struct bpf_tcp_sock** pointer from a
3611 * **struct bpf_sock** pointer.
3613 * A **struct bpf_tcp_sock** pointer on success, or **NULL** in
3616 * long bpf_skb_ecn_set_ce(struct sk_buff *skb)
3618 * Set ECN (Explicit Congestion Notification) field of IP header
3619 * to **CE** (Congestion Encountered) if current value is **ECT**
3620 * (ECN Capable Transport). Otherwise, do nothing. Works with IPv6
3623 * 1 if the **CE** flag is set (either by the current helper call
3624 * or because it was already present), 0 if it is not set.
3626 * struct bpf_sock *bpf_get_listener_sock(struct bpf_sock *sk)
3628 * Return a **struct bpf_sock** pointer in **TCP_LISTEN** state.
3629 * **bpf_sk_release**\ () is unnecessary and not allowed.
3631 * A **struct bpf_sock** pointer on success, or **NULL** in
3634 * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags)
3636 * Look for TCP socket matching *tuple*, optionally in a child
3637 * network namespace *netns*. The return value must be checked,
3638 * and if non-**NULL**, released via **bpf_sk_release**\ ().
3640 * This function is identical to **bpf_sk_lookup_tcp**\ (), except
3641 * that it also returns timewait or request sockets. Use
3642 * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the
3645 * This helper is available only if the kernel was compiled with
3646 * **CONFIG_NET** configuration option.
3648 * Pointer to **struct bpf_sock**, or **NULL** in case of failure.
3649 * For sockets with reuseport option, the **struct bpf_sock**
3650 * result is from *reuse*\ **->socks**\ [] using the hash of the
3653 * long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len)
3655 * Check whether *iph* and *th* contain a valid SYN cookie ACK for
3656 * the listening socket in *sk*.
3658 * *iph* points to the start of the IPv4 or IPv6 header, while
3659 * *iph_len* contains **sizeof**\ (**struct iphdr**) or
3660 * **sizeof**\ (**struct ipv6hdr**).
3662 * *th* points to the start of the TCP header, while *th_len*
3663 * contains the length of the TCP header (at least
3664 * **sizeof**\ (**struct tcphdr**)).
3666 * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative
3669 * long bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags)
3671 * Get name of sysctl in /proc/sys/ and copy it into provided by
3672 * program buffer *buf* of size *buf_len*.
3674 * The buffer is always NUL terminated, unless it's zero-sized.
3676 * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is
3677 * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name
3678 * only (e.g. "tcp_mem").
3680 * Number of character copied (not including the trailing NUL).
3682 * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
3683 * truncated name in this case).
3685 * long bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len)
3687 * Get current value of sysctl as it is presented in /proc/sys
3688 * (incl. newline, etc), and copy it as a string into provided
3689 * by program buffer *buf* of size *buf_len*.
3691 * The whole value is copied, no matter what file position user
3692 * space issued e.g. sys_read at.
3694 * The buffer is always NUL terminated, unless it's zero-sized.
3696 * Number of character copied (not including the trailing NUL).
3698 * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
3699 * truncated name in this case).
3701 * **-EINVAL** if current value was unavailable, e.g. because
3702 * sysctl is uninitialized and read returns -EIO for it.
3704 * long bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len)
3706 * Get new value being written by user space to sysctl (before
3707 * the actual write happens) and copy it as a string into
3708 * provided by program buffer *buf* of size *buf_len*.
3710 * User space may write new value at file position > 0.
3712 * The buffer is always NUL terminated, unless it's zero-sized.
3714 * Number of character copied (not including the trailing NUL).
3716 * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
3717 * truncated name in this case).
3719 * **-EINVAL** if sysctl is being read.
3721 * long bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len)
3723 * Override new value being written by user space to sysctl with
3724 * value provided by program in buffer *buf* of size *buf_len*.
3726 * *buf* should contain a string in same form as provided by user
3727 * space on sysctl write.
3729 * User space may write new value at file position > 0. To override
3730 * the whole sysctl value file position should be set to zero.
3734 * **-E2BIG** if the *buf_len* is too big.
3736 * **-EINVAL** if sysctl is being read.
3738 * long bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res)
3740 * Convert the initial part of the string from buffer *buf* of
3741 * size *buf_len* to a long integer according to the given base
3742 * and save the result in *res*.
3744 * The string may begin with an arbitrary amount of white space
3745 * (as determined by **isspace**\ (3)) followed by a single
3746 * optional '**-**' sign.
3748 * Five least significant bits of *flags* encode base, other bits
3749 * are currently unused.
3751 * Base must be either 8, 10, 16 or 0 to detect it automatically
3752 * similar to user space **strtol**\ (3).
3754 * Number of characters consumed on success. Must be positive but
3755 * no more than *buf_len*.
3757 * **-EINVAL** if no valid digits were found or unsupported base
3760 * **-ERANGE** if resulting value was out of range.
3762 * long bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res)
3764 * Convert the initial part of the string from buffer *buf* of
3765 * size *buf_len* to an unsigned long integer according to the
3766 * given base and save the result in *res*.
3768 * The string may begin with an arbitrary amount of white space
3769 * (as determined by **isspace**\ (3)).
3771 * Five least significant bits of *flags* encode base, other bits
3772 * are currently unused.
3774 * Base must be either 8, 10, 16 or 0 to detect it automatically
3775 * similar to user space **strtoul**\ (3).
3777 * Number of characters consumed on success. Must be positive but
3778 * no more than *buf_len*.
3780 * **-EINVAL** if no valid digits were found or unsupported base
3783 * **-ERANGE** if resulting value was out of range.
3785 * void *bpf_sk_storage_get(struct bpf_map *map, void *sk, void *value, u64 flags)
3787 * Get a bpf-local-storage from a *sk*.
3789 * Logically, it could be thought of getting the value from
3790 * a *map* with *sk* as the **key**. From this
3791 * perspective, the usage is not much different from
3792 * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this
3793 * helper enforces the key must be a full socket and the map must
3794 * be a **BPF_MAP_TYPE_SK_STORAGE** also.
3796 * Underneath, the value is stored locally at *sk* instead of
3797 * the *map*. The *map* is used as the bpf-local-storage
3798 * "type". The bpf-local-storage "type" (i.e. the *map*) is
3799 * searched against all bpf-local-storages residing at *sk*.
3801 * *sk* is a kernel **struct sock** pointer for LSM program.
3802 * *sk* is a **struct bpf_sock** pointer for other program types.
3804 * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be
3805 * used such that a new bpf-local-storage will be
3806 * created if one does not exist. *value* can be used
3807 * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify
3808 * the initial value of a bpf-local-storage. If *value* is
3809 * **NULL**, the new bpf-local-storage will be zero initialized.
3811 * A bpf-local-storage pointer is returned on success.
3813 * **NULL** if not found or there was an error in adding
3814 * a new bpf-local-storage.
3816 * long bpf_sk_storage_delete(struct bpf_map *map, void *sk)
3818 * Delete a bpf-local-storage from a *sk*.
3822 * **-ENOENT** if the bpf-local-storage cannot be found.
3823 * **-EINVAL** if sk is not a fullsock (e.g. a request_sock).
3825 * long bpf_send_signal(u32 sig)
3827 * Send signal *sig* to the process of the current task.
3828 * The signal may be delivered to any of this process's threads.
3830 * 0 on success or successfully queued.
3832 * **-EBUSY** if work queue under nmi is full.
3834 * **-EINVAL** if *sig* is invalid.
3836 * **-EPERM** if no permission to send the *sig*.
3838 * **-EAGAIN** if bpf program can try again.
3840 * s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len)
3842 * Try to issue a SYN cookie for the packet with corresponding
3843 * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*.
3845 * *iph* points to the start of the IPv4 or IPv6 header, while
3846 * *iph_len* contains **sizeof**\ (**struct iphdr**) or
3847 * **sizeof**\ (**struct ipv6hdr**).
3849 * *th* points to the start of the TCP header, while *th_len*
3850 * contains the length of the TCP header with options (at least
3851 * **sizeof**\ (**struct tcphdr**)).
3853 * On success, lower 32 bits hold the generated SYN cookie in
3854 * followed by 16 bits which hold the MSS value for that cookie,
3855 * and the top 16 bits are unused.
3857 * On failure, the returned value is one of the following:
3859 * **-EINVAL** SYN cookie cannot be issued due to error
3861 * **-ENOENT** SYN cookie should not be issued (no SYN flood)
3863 * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
3865 * **-EPROTONOSUPPORT** IP packet version is not 4 or 6
3867 * long bpf_skb_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
3869 * Write raw *data* blob into a special BPF perf event held by
3870 * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
3871 * event must have the following attributes: **PERF_SAMPLE_RAW**
3872 * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
3873 * **PERF_COUNT_SW_BPF_OUTPUT** as **config**.
3875 * The *flags* are used to indicate the index in *map* for which
3876 * the value must be put, masked with **BPF_F_INDEX_MASK**.
3877 * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
3878 * to indicate that the index of the current CPU core should be
3881 * The value to write, of *size*, is passed through eBPF stack and
3882 * pointed by *data*.
3884 * *ctx* is a pointer to in-kernel struct sk_buff.
3886 * This helper is similar to **bpf_perf_event_output**\ () but
3887 * restricted to raw_tracepoint bpf programs.
3889 * 0 on success, or a negative error in case of failure.
3891 * long bpf_probe_read_user(void *dst, u32 size, const void *unsafe_ptr)
3893 * Safely attempt to read *size* bytes from user space address
3894 * *unsafe_ptr* and store the data in *dst*.
3896 * 0 on success, or a negative error in case of failure.
3898 * long bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
3900 * Safely attempt to read *size* bytes from kernel space address
3901 * *unsafe_ptr* and store the data in *dst*.
3903 * 0 on success, or a negative error in case of failure.
3905 * long bpf_probe_read_user_str(void *dst, u32 size, const void *unsafe_ptr)
3907 * Copy a NUL terminated string from an unsafe user address
3908 * *unsafe_ptr* to *dst*. The *size* should include the
3909 * terminating NUL byte. In case the string length is smaller than
3910 * *size*, the target is not padded with further NUL bytes. If the
3911 * string length is larger than *size*, just *size*-1 bytes are
3912 * copied and the last byte is set to NUL.
3914 * On success, returns the number of bytes that were written,
3915 * including the terminal NUL. This makes this helper useful in
3916 * tracing programs for reading strings, and more importantly to
3917 * get its length at runtime. See the following snippet:
3921 * SEC("kprobe/sys_open")
3922 * void bpf_sys_open(struct pt_regs *ctx)
3924 * char buf[PATHLEN]; // PATHLEN is defined to 256
3925 * int res = bpf_probe_read_user_str(buf, sizeof(buf),
3928 * // Consume buf, for example push it to
3929 * // userspace via bpf_perf_event_output(); we
3930 * // can use res (the string length) as event
3931 * // size, after checking its boundaries.
3934 * In comparison, using **bpf_probe_read_user**\ () helper here
3935 * instead to read the string would require to estimate the length
3936 * at compile time, and would often result in copying more memory
3939 * Another useful use case is when parsing individual process
3940 * arguments or individual environment variables navigating
3941 * *current*\ **->mm->arg_start** and *current*\
3942 * **->mm->env_start**: using this helper and the return value,
3943 * one can quickly iterate at the right offset of the memory area.
3945 * On success, the strictly positive length of the output string,
3946 * including the trailing NUL character. On error, a negative
3949 * long bpf_probe_read_kernel_str(void *dst, u32 size, const void *unsafe_ptr)
3951 * Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr*
3952 * to *dst*. Same semantics as with **bpf_probe_read_user_str**\ () apply.
3954 * On success, the strictly positive length of the string, including
3955 * the trailing NUL character. On error, a negative value.
3957 * long bpf_tcp_send_ack(void *tp, u32 rcv_nxt)
3959 * Send out a tcp-ack. *tp* is the in-kernel struct **tcp_sock**.
3960 * *rcv_nxt* is the ack_seq to be sent out.
3962 * 0 on success, or a negative error in case of failure.
3964 * long bpf_send_signal_thread(u32 sig)
3966 * Send signal *sig* to the thread corresponding to the current task.
3968 * 0 on success or successfully queued.
3970 * **-EBUSY** if work queue under nmi is full.
3972 * **-EINVAL** if *sig* is invalid.
3974 * **-EPERM** if no permission to send the *sig*.
3976 * **-EAGAIN** if bpf program can try again.
3978 * u64 bpf_jiffies64(void)
3980 * Obtain the 64bit jiffies
3982 * The 64 bit jiffies
3984 * long bpf_read_branch_records(struct bpf_perf_event_data *ctx, void *buf, u32 size, u64 flags)
3986 * For an eBPF program attached to a perf event, retrieve the
3987 * branch records (**struct perf_branch_entry**) associated to *ctx*
3988 * and store it in the buffer pointed by *buf* up to size
3991 * On success, number of bytes written to *buf*. On error, a
3994 * The *flags* can be set to **BPF_F_GET_BRANCH_RECORDS_SIZE** to
3995 * instead return the number of bytes required to store all the
3996 * branch entries. If this flag is set, *buf* may be NULL.
3998 * **-EINVAL** if arguments invalid or **size** not a multiple
3999 * of **sizeof**\ (**struct perf_branch_entry**\ ).
4001 * **-ENOENT** if architecture does not support branch records.
4003 * long bpf_get_ns_current_pid_tgid(u64 dev, u64 ino, struct bpf_pidns_info *nsdata, u32 size)
4005 * Returns 0 on success, values for *pid* and *tgid* as seen from the current
4006 * *namespace* will be returned in *nsdata*.
4008 * 0 on success, or one of the following in case of failure:
4010 * **-EINVAL** if dev and inum supplied don't match dev_t and inode number
4011 * with nsfs of current task, or if dev conversion to dev_t lost high bits.
4013 * **-ENOENT** if pidns does not exists for the current task.
4015 * long bpf_xdp_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
4017 * Write raw *data* blob into a special BPF perf event held by
4018 * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
4019 * event must have the following attributes: **PERF_SAMPLE_RAW**
4020 * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
4021 * **PERF_COUNT_SW_BPF_OUTPUT** as **config**.
4023 * The *flags* are used to indicate the index in *map* for which
4024 * the value must be put, masked with **BPF_F_INDEX_MASK**.
4025 * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
4026 * to indicate that the index of the current CPU core should be
4029 * The value to write, of *size*, is passed through eBPF stack and
4030 * pointed by *data*.
4032 * *ctx* is a pointer to in-kernel struct xdp_buff.
4034 * This helper is similar to **bpf_perf_eventoutput**\ () but
4035 * restricted to raw_tracepoint bpf programs.
4037 * 0 on success, or a negative error in case of failure.
4039 * u64 bpf_get_netns_cookie(void *ctx)
4041 * Retrieve the cookie (generated by the kernel) of the network
4042 * namespace the input *ctx* is associated with. The network
4043 * namespace cookie remains stable for its lifetime and provides
4044 * a global identifier that can be assumed unique. If *ctx* is
4045 * NULL, then the helper returns the cookie for the initial
4046 * network namespace. The cookie itself is very similar to that
4047 * of **bpf_get_socket_cookie**\ () helper, but for network
4048 * namespaces instead of sockets.
4050 * A 8-byte long opaque number.
4052 * u64 bpf_get_current_ancestor_cgroup_id(int ancestor_level)
4054 * Return id of cgroup v2 that is ancestor of the cgroup associated
4055 * with the current task at the *ancestor_level*. The root cgroup
4056 * is at *ancestor_level* zero and each step down the hierarchy
4057 * increments the level. If *ancestor_level* == level of cgroup
4058 * associated with the current task, then return value will be the
4059 * same as that of **bpf_get_current_cgroup_id**\ ().
4061 * The helper is useful to implement policies based on cgroups
4062 * that are upper in hierarchy than immediate cgroup associated
4063 * with the current task.
4065 * The format of returned id and helper limitations are same as in
4066 * **bpf_get_current_cgroup_id**\ ().
4068 * The id is returned or 0 in case the id could not be retrieved.
4070 * long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags)
4072 * Helper is overloaded depending on BPF program type. This
4073 * description applies to **BPF_PROG_TYPE_SCHED_CLS** and
4074 * **BPF_PROG_TYPE_SCHED_ACT** programs.
4076 * Assign the *sk* to the *skb*. When combined with appropriate
4077 * routing configuration to receive the packet towards the socket,
4078 * will cause *skb* to be delivered to the specified socket.
4079 * Subsequent redirection of *skb* via **bpf_redirect**\ (),
4080 * **bpf_clone_redirect**\ () or other methods outside of BPF may
4081 * interfere with successful delivery to the socket.
4083 * This operation is only valid from TC ingress path.
4085 * The *flags* argument must be zero.
4087 * 0 on success, or a negative error in case of failure:
4089 * **-EINVAL** if specified *flags* are not supported.
4091 * **-ENOENT** if the socket is unavailable for assignment.
4093 * **-ENETUNREACH** if the socket is unreachable (wrong netns).
4095 * **-EOPNOTSUPP** if the operation is not supported, for example
4096 * a call from outside of TC ingress.
4098 * **-ESOCKTNOSUPPORT** if the socket type is not supported
4101 * long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags)
4103 * Helper is overloaded depending on BPF program type. This
4104 * description applies to **BPF_PROG_TYPE_SK_LOOKUP** programs.
4106 * Select the *sk* as a result of a socket lookup.
4108 * For the operation to succeed passed socket must be compatible
4109 * with the packet description provided by the *ctx* object.
4111 * L4 protocol (**IPPROTO_TCP** or **IPPROTO_UDP**) must
4112 * be an exact match. While IP family (**AF_INET** or
4113 * **AF_INET6**) must be compatible, that is IPv6 sockets
4114 * that are not v6-only can be selected for IPv4 packets.
4116 * Only TCP listeners and UDP unconnected sockets can be
4117 * selected. *sk* can also be NULL to reset any previous
4120 * *flags* argument can combination of following values:
4122 * * **BPF_SK_LOOKUP_F_REPLACE** to override the previous
4123 * socket selection, potentially done by a BPF program
4124 * that ran before us.
4126 * * **BPF_SK_LOOKUP_F_NO_REUSEPORT** to skip
4127 * load-balancing within reuseport group for the socket
4130 * On success *ctx->sk* will point to the selected socket.
4133 * 0 on success, or a negative errno in case of failure.
4135 * * **-EAFNOSUPPORT** if socket family (*sk->family*) is
4136 * not compatible with packet family (*ctx->family*).
4138 * * **-EEXIST** if socket has been already selected,
4139 * potentially by another program, and
4140 * **BPF_SK_LOOKUP_F_REPLACE** flag was not specified.
4142 * * **-EINVAL** if unsupported flags were specified.
4144 * * **-EPROTOTYPE** if socket L4 protocol
4145 * (*sk->protocol*) doesn't match packet protocol
4146 * (*ctx->protocol*).
4148 * * **-ESOCKTNOSUPPORT** if socket is not in allowed
4149 * state (TCP listening or UDP unconnected).
4151 * u64 bpf_ktime_get_boot_ns(void)
4153 * Return the time elapsed since system boot, in nanoseconds.
4154 * Does include the time the system was suspended.
4155 * See: **clock_gettime**\ (**CLOCK_BOOTTIME**)
4159 * long bpf_seq_printf(struct seq_file *m, const char *fmt, u32 fmt_size, const void *data, u32 data_len)
4161 * **bpf_seq_printf**\ () uses seq_file **seq_printf**\ () to print
4162 * out the format string.
4163 * The *m* represents the seq_file. The *fmt* and *fmt_size* are for
4164 * the format string itself. The *data* and *data_len* are format string
4165 * arguments. The *data* are a **u64** array and corresponding format string
4166 * values are stored in the array. For strings and pointers where pointees
4167 * are accessed, only the pointer values are stored in the *data* array.
4168 * The *data_len* is the size of *data* in bytes - must be a multiple of 8.
4170 * Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory.
4171 * Reading kernel memory may fail due to either invalid address or
4172 * valid address but requiring a major memory fault. If reading kernel memory
4173 * fails, the string for **%s** will be an empty string, and the ip
4174 * address for **%p{i,I}{4,6}** will be 0. Not returning error to
4175 * bpf program is consistent with what **bpf_trace_printk**\ () does for now.
4177 * 0 on success, or a negative error in case of failure:
4179 * **-EBUSY** if per-CPU memory copy buffer is busy, can try again
4180 * by returning 1 from bpf program.
4182 * **-EINVAL** if arguments are invalid, or if *fmt* is invalid/unsupported.
4184 * **-E2BIG** if *fmt* contains too many format specifiers.
4186 * **-EOVERFLOW** if an overflow happened: The same object will be tried again.
4188 * long bpf_seq_write(struct seq_file *m, const void *data, u32 len)
4190 * **bpf_seq_write**\ () uses seq_file **seq_write**\ () to write the data.
4191 * The *m* represents the seq_file. The *data* and *len* represent the
4192 * data to write in bytes.
4194 * 0 on success, or a negative error in case of failure:
4196 * **-EOVERFLOW** if an overflow happened: The same object will be tried again.
4198 * u64 bpf_sk_cgroup_id(void *sk)
4200 * Return the cgroup v2 id of the socket *sk*.
4202 * *sk* must be a non-**NULL** pointer to a socket, e.g. one
4203 * returned from **bpf_sk_lookup_xxx**\ (),
4204 * **bpf_sk_fullsock**\ (), etc. The format of returned id is
4205 * same as in **bpf_skb_cgroup_id**\ ().
4207 * This helper is available only if the kernel was compiled with
4208 * the **CONFIG_SOCK_CGROUP_DATA** configuration option.
4210 * The id is returned or 0 in case the id could not be retrieved.
4212 * u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level)
4214 * Return id of cgroup v2 that is ancestor of cgroup associated
4215 * with the *sk* at the *ancestor_level*. The root cgroup is at
4216 * *ancestor_level* zero and each step down the hierarchy
4217 * increments the level. If *ancestor_level* == level of cgroup
4218 * associated with *sk*, then return value will be same as that
4219 * of **bpf_sk_cgroup_id**\ ().
4221 * The helper is useful to implement policies based on cgroups
4222 * that are upper in hierarchy than immediate cgroup associated
4225 * The format of returned id and helper limitations are same as in
4226 * **bpf_sk_cgroup_id**\ ().
4228 * The id is returned or 0 in case the id could not be retrieved.
4230 * long bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags)
4232 * Copy *size* bytes from *data* into a ring buffer *ringbuf*.
4233 * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification
4234 * of new data availability is sent.
4235 * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
4236 * of new data availability is sent unconditionally.
4237 * If **0** is specified in *flags*, an adaptive notification
4238 * of new data availability is sent.
4240 * An adaptive notification is a notification sent whenever the user-space
4241 * process has caught up and consumed all available payloads. In case the user-space
4242 * process is still processing a previous payload, then no notification is needed
4243 * as it will process the newly added payload automatically.
4245 * 0 on success, or a negative error in case of failure.
4247 * void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags)
4249 * Reserve *size* bytes of payload in a ring buffer *ringbuf*.
4250 * *flags* must be 0.
4252 * Valid pointer with *size* bytes of memory available; NULL,
4255 * void bpf_ringbuf_submit(void *data, u64 flags)
4257 * Submit reserved ring buffer sample, pointed to by *data*.
4258 * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification
4259 * of new data availability is sent.
4260 * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
4261 * of new data availability is sent unconditionally.
4262 * If **0** is specified in *flags*, an adaptive notification
4263 * of new data availability is sent.
4265 * See 'bpf_ringbuf_output()' for the definition of adaptive notification.
4267 * Nothing. Always succeeds.
4269 * void bpf_ringbuf_discard(void *data, u64 flags)
4271 * Discard reserved ring buffer sample, pointed to by *data*.
4272 * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification
4273 * of new data availability is sent.
4274 * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
4275 * of new data availability is sent unconditionally.
4276 * If **0** is specified in *flags*, an adaptive notification
4277 * of new data availability is sent.
4279 * See 'bpf_ringbuf_output()' for the definition of adaptive notification.
4281 * Nothing. Always succeeds.
4283 * u64 bpf_ringbuf_query(void *ringbuf, u64 flags)
4285 * Query various characteristics of provided ring buffer. What
4286 * exactly is queries is determined by *flags*:
4288 * * **BPF_RB_AVAIL_DATA**: Amount of data not yet consumed.
4289 * * **BPF_RB_RING_SIZE**: The size of ring buffer.
4290 * * **BPF_RB_CONS_POS**: Consumer position (can wrap around).
4291 * * **BPF_RB_PROD_POS**: Producer(s) position (can wrap around).
4293 * Data returned is just a momentary snapshot of actual values
4294 * and could be inaccurate, so this facility should be used to
4295 * power heuristics and for reporting, not to make 100% correct
4298 * Requested value, or 0, if *flags* are not recognized.
4300 * long bpf_csum_level(struct sk_buff *skb, u64 level)
4302 * Change the skbs checksum level by one layer up or down, or
4303 * reset it entirely to none in order to have the stack perform
4304 * checksum validation. The level is applicable to the following
4305 * protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of
4306 * | ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP |
4307 * through **bpf_skb_adjust_room**\ () helper with passing in
4308 * **BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one call
4309 * to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since
4310 * the UDP header is removed. Similarly, an encap of the latter
4311 * into the former could be accompanied by a helper call to
4312 * **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the
4313 * skb is still intended to be processed in higher layers of the
4314 * stack instead of just egressing at tc.
4316 * There are three supported level settings at this time:
4318 * * **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs
4319 * with CHECKSUM_UNNECESSARY.
4320 * * **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs
4321 * with CHECKSUM_UNNECESSARY.
4322 * * **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and
4323 * sets CHECKSUM_NONE to force checksum validation by the stack.
4324 * * **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current
4327 * 0 on success, or a negative error in case of failure. In the
4328 * case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level
4329 * is returned or the error code -EACCES in case the skb is not
4330 * subject to CHECKSUM_UNNECESSARY.
4332 * struct tcp6_sock *bpf_skc_to_tcp6_sock(void *sk)
4334 * Dynamically cast a *sk* pointer to a *tcp6_sock* pointer.
4336 * *sk* if casting is valid, or **NULL** otherwise.
4338 * struct tcp_sock *bpf_skc_to_tcp_sock(void *sk)
4340 * Dynamically cast a *sk* pointer to a *tcp_sock* pointer.
4342 * *sk* if casting is valid, or **NULL** otherwise.
4344 * struct tcp_timewait_sock *bpf_skc_to_tcp_timewait_sock(void *sk)
4346 * Dynamically cast a *sk* pointer to a *tcp_timewait_sock* pointer.
4348 * *sk* if casting is valid, or **NULL** otherwise.
4350 * struct tcp_request_sock *bpf_skc_to_tcp_request_sock(void *sk)
4352 * Dynamically cast a *sk* pointer to a *tcp_request_sock* pointer.
4354 * *sk* if casting is valid, or **NULL** otherwise.
4356 * struct udp6_sock *bpf_skc_to_udp6_sock(void *sk)
4358 * Dynamically cast a *sk* pointer to a *udp6_sock* pointer.
4360 * *sk* if casting is valid, or **NULL** otherwise.
4362 * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags)
4364 * Return a user or a kernel stack in bpf program provided buffer.
4365 * Note: the user stack will only be populated if the *task* is
4366 * the current task; all other tasks will return -EOPNOTSUPP.
4367 * To achieve this, the helper needs *task*, which is a valid
4368 * pointer to **struct task_struct**. To store the stacktrace, the
4369 * bpf program provides *buf* with a nonnegative *size*.
4371 * The last argument, *flags*, holds the number of stack frames to
4372 * skip (from 0 to 255), masked with
4373 * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
4374 * the following flags:
4376 * **BPF_F_USER_STACK**
4377 * Collect a user space stack instead of a kernel stack.
4378 * The *task* must be the current task.
4379 * **BPF_F_USER_BUILD_ID**
4380 * Collect buildid+offset instead of ips for user stack,
4381 * only valid if **BPF_F_USER_STACK** is also specified.
4383 * **bpf_get_task_stack**\ () can collect up to
4384 * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
4385 * to sufficient large buffer size. Note that
4386 * this limit can be controlled with the **sysctl** program, and
4387 * that it should be manually increased in order to profile long
4388 * user stacks (such as stacks for Java programs). To do so, use:
4392 * # sysctl kernel.perf_event_max_stack=<new value>
4394 * The non-negative copied *buf* length equal to or less than
4395 * *size* on success, or a negative error in case of failure.
4397 * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags)
4399 * Load header option. Support reading a particular TCP header
4400 * option for bpf program (**BPF_PROG_TYPE_SOCK_OPS**).
4402 * If *flags* is 0, it will search the option from the
4403 * *skops*\ **->skb_data**. The comment in **struct bpf_sock_ops**
4404 * has details on what skb_data contains under different
4405 * *skops*\ **->op**.
4407 * The first byte of the *searchby_res* specifies the
4408 * kind that it wants to search.
4410 * If the searching kind is an experimental kind
4411 * (i.e. 253 or 254 according to RFC6994). It also
4412 * needs to specify the "magic" which is either
4413 * 2 bytes or 4 bytes. It then also needs to
4414 * specify the size of the magic by using
4415 * the 2nd byte which is "kind-length" of a TCP
4416 * header option and the "kind-length" also
4417 * includes the first 2 bytes "kind" and "kind-length"
4418 * itself as a normal TCP header option also does.
4420 * For example, to search experimental kind 254 with
4421 * 2 byte magic 0xeB9F, the searchby_res should be
4422 * [ 254, 4, 0xeB, 0x9F, 0, 0, .... 0 ].
4424 * To search for the standard window scale option (3),
4425 * the *searchby_res* should be [ 3, 0, 0, .... 0 ].
4426 * Note, kind-length must be 0 for regular option.
4428 * Searching for No-Op (0) and End-of-Option-List (1) are
4431 * *len* must be at least 2 bytes which is the minimal size
4432 * of a header option.
4436 * * **BPF_LOAD_HDR_OPT_TCP_SYN** to search from the
4437 * saved_syn packet or the just-received syn packet.
4440 * > 0 when found, the header option is copied to *searchby_res*.
4441 * The return value is the total length copied. On failure, a
4442 * negative error code is returned:
4444 * **-EINVAL** if a parameter is invalid.
4446 * **-ENOMSG** if the option is not found.
4448 * **-ENOENT** if no syn packet is available when
4449 * **BPF_LOAD_HDR_OPT_TCP_SYN** is used.
4451 * **-ENOSPC** if there is not enough space. Only *len* number of
4454 * **-EFAULT** on failure to parse the header options in the
4457 * **-EPERM** if the helper cannot be used under the current
4458 * *skops*\ **->op**.
4460 * long bpf_store_hdr_opt(struct bpf_sock_ops *skops, const void *from, u32 len, u64 flags)
4462 * Store header option. The data will be copied
4463 * from buffer *from* with length *len* to the TCP header.
4465 * The buffer *from* should have the whole option that
4466 * includes the kind, kind-length, and the actual
4467 * option data. The *len* must be at least kind-length
4468 * long. The kind-length does not have to be 4 byte
4469 * aligned. The kernel will take care of the padding
4470 * and setting the 4 bytes aligned value to th->doff.
4472 * This helper will check for duplicated option
4473 * by searching the same option in the outgoing skb.
4475 * This helper can only be called during
4476 * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**.
4479 * 0 on success, or negative error in case of failure:
4481 * **-EINVAL** If param is invalid.
4483 * **-ENOSPC** if there is not enough space in the header.
4484 * Nothing has been written
4486 * **-EEXIST** if the option already exists.
4488 * **-EFAULT** on failure to parse the existing header options.
4490 * **-EPERM** if the helper cannot be used under the current
4491 * *skops*\ **->op**.
4493 * long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags)
4495 * Reserve *len* bytes for the bpf header option. The
4496 * space will be used by **bpf_store_hdr_opt**\ () later in
4497 * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**.
4499 * If **bpf_reserve_hdr_opt**\ () is called multiple times,
4500 * the total number of bytes will be reserved.
4502 * This helper can only be called during
4503 * **BPF_SOCK_OPS_HDR_OPT_LEN_CB**.
4506 * 0 on success, or negative error in case of failure:
4508 * **-EINVAL** if a parameter is invalid.
4510 * **-ENOSPC** if there is not enough space in the header.
4512 * **-EPERM** if the helper cannot be used under the current
4513 * *skops*\ **->op**.
4515 * void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags)
4517 * Get a bpf_local_storage from an *inode*.
4519 * Logically, it could be thought of as getting the value from
4520 * a *map* with *inode* as the **key**. From this
4521 * perspective, the usage is not much different from
4522 * **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this
4523 * helper enforces the key must be an inode and the map must also
4524 * be a **BPF_MAP_TYPE_INODE_STORAGE**.
4526 * Underneath, the value is stored locally at *inode* instead of
4527 * the *map*. The *map* is used as the bpf-local-storage
4528 * "type". The bpf-local-storage "type" (i.e. the *map*) is
4529 * searched against all bpf_local_storage residing at *inode*.
4531 * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be
4532 * used such that a new bpf_local_storage will be
4533 * created if one does not exist. *value* can be used
4534 * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify
4535 * the initial value of a bpf_local_storage. If *value* is
4536 * **NULL**, the new bpf_local_storage will be zero initialized.
4538 * A bpf_local_storage pointer is returned on success.
4540 * **NULL** if not found or there was an error in adding
4541 * a new bpf_local_storage.
4543 * int bpf_inode_storage_delete(struct bpf_map *map, void *inode)
4545 * Delete a bpf_local_storage from an *inode*.
4549 * **-ENOENT** if the bpf_local_storage cannot be found.
4551 * long bpf_d_path(struct path *path, char *buf, u32 sz)
4553 * Return full path for given **struct path** object, which
4554 * needs to be the kernel BTF *path* object. The path is
4555 * returned in the provided buffer *buf* of size *sz* and
4556 * is zero terminated.
4559 * On success, the strictly positive length of the string,
4560 * including the trailing NUL character. On error, a negative
4563 * long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr)
4565 * Read *size* bytes from user space address *user_ptr* and store
4566 * the data in *dst*. This is a wrapper of **copy_from_user**\ ().
4568 * 0 on success, or a negative error in case of failure.
4570 * long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags)
4572 * Use BTF to store a string representation of *ptr*->ptr in *str*,
4573 * using *ptr*->type_id. This value should specify the type
4574 * that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1)
4575 * can be used to look up vmlinux BTF type ids. Traversing the
4576 * data structure using BTF, the type information and values are
4577 * stored in the first *str_size* - 1 bytes of *str*. Safe copy of
4578 * the pointer data is carried out to avoid kernel crashes during
4579 * operation. Smaller types can use string space on the stack;
4580 * larger programs can use map data to store the string
4583 * The string can be subsequently shared with userspace via
4584 * bpf_perf_event_output() or ring buffer interfaces.
4585 * bpf_trace_printk() is to be avoided as it places too small
4586 * a limit on string size to be useful.
4588 * *flags* is a combination of
4591 * no formatting around type information
4593 * no struct/union member names/types
4595 * show raw (unobfuscated) pointer values;
4596 * equivalent to printk specifier %px.
4598 * show zero-valued struct/union members; they
4599 * are not displayed by default
4602 * The number of bytes that were written (or would have been
4603 * written if output had to be truncated due to string size),
4604 * or a negative error in cases of failure.
4606 * long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags)
4608 * Use BTF to write to seq_write a string representation of
4609 * *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf().
4610 * *flags* are identical to those used for bpf_snprintf_btf.
4612 * 0 on success or a negative error in case of failure.
4614 * u64 bpf_skb_cgroup_classid(struct sk_buff *skb)
4616 * See **bpf_get_cgroup_classid**\ () for the main description.
4617 * This helper differs from **bpf_get_cgroup_classid**\ () in that
4618 * the cgroup v1 net_cls class is retrieved only from the *skb*'s
4619 * associated socket instead of the current process.
4621 * The id is returned or 0 in case the id could not be retrieved.
4623 * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags)
4625 * Redirect the packet to another net device of index *ifindex*
4626 * and fill in L2 addresses from neighboring subsystem. This helper
4627 * is somewhat similar to **bpf_redirect**\ (), except that it
4628 * populates L2 addresses as well, meaning, internally, the helper
4629 * relies on the neighbor lookup for the L2 address of the nexthop.
4631 * The helper will perform a FIB lookup based on the skb's
4632 * networking header to get the address of the next hop, unless
4633 * this is supplied by the caller in the *params* argument. The
4634 * *plen* argument indicates the len of *params* and should be set
4635 * to 0 if *params* is NULL.
4637 * The *flags* argument is reserved and must be 0. The helper is
4638 * currently only supported for tc BPF program types, and enabled
4639 * for IPv4 and IPv6 protocols.
4641 * The helper returns **TC_ACT_REDIRECT** on success or
4642 * **TC_ACT_SHOT** on error.
4644 * void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu)
4646 * Take a pointer to a percpu ksym, *percpu_ptr*, and return a
4647 * pointer to the percpu kernel variable on *cpu*. A ksym is an
4648 * extern variable decorated with '__ksym'. For ksym, there is a
4649 * global var (either static or global) defined of the same name
4650 * in the kernel. The ksym is percpu if the global var is percpu.
4651 * The returned pointer points to the global percpu var on *cpu*.
4653 * bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the
4654 * kernel, except that bpf_per_cpu_ptr() may return NULL. This
4655 * happens if *cpu* is larger than nr_cpu_ids. The caller of
4656 * bpf_per_cpu_ptr() must check the returned value.
4658 * A pointer pointing to the kernel percpu variable on *cpu*, or
4659 * NULL, if *cpu* is invalid.
4661 * void *bpf_this_cpu_ptr(const void *percpu_ptr)
4663 * Take a pointer to a percpu ksym, *percpu_ptr*, and return a
4664 * pointer to the percpu kernel variable on this cpu. See the
4665 * description of 'ksym' in **bpf_per_cpu_ptr**\ ().
4667 * bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in
4668 * the kernel. Different from **bpf_per_cpu_ptr**\ (), it would
4669 * never return NULL.
4671 * A pointer pointing to the kernel percpu variable on this cpu.
4673 * long bpf_redirect_peer(u32 ifindex, u64 flags)
4675 * Redirect the packet to another net device of index *ifindex*.
4676 * This helper is somewhat similar to **bpf_redirect**\ (), except
4677 * that the redirection happens to the *ifindex*' peer device and
4678 * the netns switch takes place from ingress to ingress without
4679 * going through the CPU's backlog queue.
4681 * The *flags* argument is reserved and must be 0. The helper is
4682 * currently only supported for tc BPF program types at the ingress
4683 * hook and for veth device types. The peer device must reside in a
4684 * different network namespace.
4686 * The helper returns **TC_ACT_REDIRECT** on success or
4687 * **TC_ACT_SHOT** on error.
4689 * void *bpf_task_storage_get(struct bpf_map *map, struct task_struct *task, void *value, u64 flags)
4691 * Get a bpf_local_storage from the *task*.
4693 * Logically, it could be thought of as getting the value from
4694 * a *map* with *task* as the **key**. From this
4695 * perspective, the usage is not much different from
4696 * **bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this
4697 * helper enforces the key must be a task_struct and the map must also
4698 * be a **BPF_MAP_TYPE_TASK_STORAGE**.
4700 * Underneath, the value is stored locally at *task* instead of
4701 * the *map*. The *map* is used as the bpf-local-storage
4702 * "type". The bpf-local-storage "type" (i.e. the *map*) is
4703 * searched against all bpf_local_storage residing at *task*.
4705 * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be
4706 * used such that a new bpf_local_storage will be
4707 * created if one does not exist. *value* can be used
4708 * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify
4709 * the initial value of a bpf_local_storage. If *value* is
4710 * **NULL**, the new bpf_local_storage will be zero initialized.
4712 * A bpf_local_storage pointer is returned on success.
4714 * **NULL** if not found or there was an error in adding
4715 * a new bpf_local_storage.
4717 * long bpf_task_storage_delete(struct bpf_map *map, struct task_struct *task)
4719 * Delete a bpf_local_storage from a *task*.
4723 * **-ENOENT** if the bpf_local_storage cannot be found.
4725 * struct task_struct *bpf_get_current_task_btf(void)
4727 * Return a BTF pointer to the "current" task.
4728 * This pointer can also be used in helpers that accept an
4729 * *ARG_PTR_TO_BTF_ID* of type *task_struct*.
4731 * Pointer to the current task.
4733 * long bpf_bprm_opts_set(struct linux_binprm *bprm, u64 flags)
4735 * Set or clear certain options on *bprm*:
4737 * **BPF_F_BPRM_SECUREEXEC** Set the secureexec bit
4738 * which sets the **AT_SECURE** auxv for glibc. The bit
4739 * is cleared if the flag is not specified.
4741 * **-EINVAL** if invalid *flags* are passed, zero otherwise.
4743 * u64 bpf_ktime_get_coarse_ns(void)
4745 * Return a coarse-grained version of the time elapsed since
4746 * system boot, in nanoseconds. Does not include time the system
4749 * See: **clock_gettime**\ (**CLOCK_MONOTONIC_COARSE**)
4753 * long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size)
4755 * Returns the stored IMA hash of the *inode* (if it's available).
4756 * If the hash is larger than *size*, then only *size*
4757 * bytes will be copied to *dst*
4759 * The **hash_algo** is returned on success,
4760 * **-EOPNOTSUP** if IMA is disabled or **-EINVAL** if
4761 * invalid arguments are passed.
4763 * struct socket *bpf_sock_from_file(struct file *file)
4765 * If the given file represents a socket, returns the associated
4768 * A pointer to a struct socket on success or NULL if the file is
4771 * long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags)
4773 * Check packet size against exceeding MTU of net device (based
4774 * on *ifindex*). This helper will likely be used in combination
4775 * with helpers that adjust/change the packet size.
4777 * The argument *len_diff* can be used for querying with a planned
4778 * size change. This allows to check MTU prior to changing packet
4779 * ctx. Providing a *len_diff* adjustment that is larger than the
4780 * actual packet size (resulting in negative packet size) will in
4781 * principle not exceed the MTU, which is why it is not considered
4782 * a failure. Other BPF helpers are needed for performing the
4783 * planned size change; therefore the responsibility for catching
4784 * a negative packet size belongs in those helpers.
4786 * Specifying *ifindex* zero means the MTU check is performed
4787 * against the current net device. This is practical if this isn't
4788 * used prior to redirect.
4790 * On input *mtu_len* must be a valid pointer, else verifier will
4791 * reject BPF program. If the value *mtu_len* is initialized to
4792 * zero then the ctx packet size is use. When value *mtu_len* is
4793 * provided as input this specify the L3 length that the MTU check
4794 * is done against. Remember XDP and TC length operate at L2, but
4795 * this value is L3 as this correlate to MTU and IP-header tot_len
4796 * values which are L3 (similar behavior as bpf_fib_lookup).
4798 * The Linux kernel route table can configure MTUs on a more
4799 * specific per route level, which is not provided by this helper.
4800 * For route level MTU checks use the **bpf_fib_lookup**\ ()
4803 * *ctx* is either **struct xdp_md** for XDP programs or
4804 * **struct sk_buff** for tc cls_act programs.
4806 * The *flags* argument can be a combination of one or more of the
4809 * **BPF_MTU_CHK_SEGS**
4810 * This flag will only works for *ctx* **struct sk_buff**.
4811 * If packet context contains extra packet segment buffers
4812 * (often knows as GSO skb), then MTU check is harder to
4813 * check at this point, because in transmit path it is
4814 * possible for the skb packet to get re-segmented
4815 * (depending on net device features). This could still be
4816 * a MTU violation, so this flag enables performing MTU
4817 * check against segments, with a different violation
4818 * return code to tell it apart. Check cannot use len_diff.
4820 * On return *mtu_len* pointer contains the MTU value of the net
4821 * device. Remember the net device configured MTU is the L3 size,
4822 * which is returned here and XDP and TC length operate at L2.
4823 * Helper take this into account for you, but remember when using
4824 * MTU value in your BPF-code.
4827 * * 0 on success, and populate MTU value in *mtu_len* pointer.
4829 * * < 0 if any input argument is invalid (*mtu_len* not updated)
4831 * MTU violations return positive values, but also populate MTU
4832 * value in *mtu_len* pointer, as this can be needed for
4833 * implementing PMTU handing:
4835 * * **BPF_MTU_CHK_RET_FRAG_NEEDED**
4836 * * **BPF_MTU_CHK_RET_SEGS_TOOBIG**
4838 * long bpf_for_each_map_elem(struct bpf_map *map, void *callback_fn, void *callback_ctx, u64 flags)
4840 * For each element in **map**, call **callback_fn** function with
4841 * **map**, **callback_ctx** and other map-specific parameters.
4842 * The **callback_fn** should be a static function and
4843 * the **callback_ctx** should be a pointer to the stack.
4844 * The **flags** is used to control certain aspects of the helper.
4845 * Currently, the **flags** must be 0.
4847 * The following are a list of supported map types and their
4848 * respective expected callback signatures:
4850 * BPF_MAP_TYPE_HASH, BPF_MAP_TYPE_PERCPU_HASH,
4851 * BPF_MAP_TYPE_LRU_HASH, BPF_MAP_TYPE_LRU_PERCPU_HASH,
4852 * BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PERCPU_ARRAY
4854 * long (\*callback_fn)(struct bpf_map \*map, const void \*key, void \*value, void \*ctx);
4856 * For per_cpu maps, the map_value is the value on the cpu where the
4857 * bpf_prog is running.
4859 * If **callback_fn** return 0, the helper will continue to the next
4860 * element. If return value is 1, the helper will skip the rest of
4861 * elements and return. Other return values are not used now.
4864 * The number of traversed map elements for success, **-EINVAL** for
4865 * invalid **flags**.
4867 * long bpf_snprintf(char *str, u32 str_size, const char *fmt, u64 *data, u32 data_len)
4869 * Outputs a string into the **str** buffer of size **str_size**
4870 * based on a format string stored in a read-only map pointed by
4873 * Each format specifier in **fmt** corresponds to one u64 element
4874 * in the **data** array. For strings and pointers where pointees
4875 * are accessed, only the pointer values are stored in the *data*
4876 * array. The *data_len* is the size of *data* in bytes - must be
4879 * Formats **%s** and **%p{i,I}{4,6}** require to read kernel
4880 * memory. Reading kernel memory may fail due to either invalid
4881 * address or valid address but requiring a major memory fault. If
4882 * reading kernel memory fails, the string for **%s** will be an
4883 * empty string, and the ip address for **%p{i,I}{4,6}** will be 0.
4884 * Not returning error to bpf program is consistent with what
4885 * **bpf_trace_printk**\ () does for now.
4888 * The strictly positive length of the formatted string, including
4889 * the trailing zero character. If the return value is greater than
4890 * **str_size**, **str** contains a truncated string, guaranteed to
4891 * be zero-terminated except when **str_size** is 0.
4893 * Or **-EBUSY** if the per-CPU memory copy buffer is busy.
4895 * long bpf_sys_bpf(u32 cmd, void *attr, u32 attr_size)
4897 * Execute bpf syscall with given arguments.
4901 * long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags)
4903 * Find BTF type with given name and kind in vmlinux BTF or in module's BTFs.
4905 * Returns btf_id and btf_obj_fd in lower and upper 32 bits.
4907 * long bpf_sys_close(u32 fd)
4909 * Execute close syscall for given FD.
4913 * long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, u64 flags)
4915 * Initialize the timer.
4916 * First 4 bits of *flags* specify clockid.
4917 * Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed.
4918 * All other bits of *flags* are reserved.
4919 * The verifier will reject the program if *timer* is not from
4923 * **-EBUSY** if *timer* is already initialized.
4924 * **-EINVAL** if invalid *flags* are passed.
4925 * **-EPERM** if *timer* is in a map that doesn't have any user references.
4926 * The user space should either hold a file descriptor to a map with timers
4927 * or pin such map in bpffs. When map is unpinned or file descriptor is
4928 * closed all timers in the map will be cancelled and freed.
4930 * long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn)
4932 * Configure the timer to call *callback_fn* static function.
4935 * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier.
4936 * **-EPERM** if *timer* is in a map that doesn't have any user references.
4937 * The user space should either hold a file descriptor to a map with timers
4938 * or pin such map in bpffs. When map is unpinned or file descriptor is
4939 * closed all timers in the map will be cancelled and freed.
4941 * long bpf_timer_start(struct bpf_timer *timer, u64 nsecs, u64 flags)
4943 * Set timer expiration N nanoseconds from the current time. The
4944 * configured callback will be invoked in soft irq context on some cpu
4945 * and will not repeat unless another bpf_timer_start() is made.
4946 * In such case the next invocation can migrate to a different cpu.
4947 * Since struct bpf_timer is a field inside map element the map
4948 * owns the timer. The bpf_timer_set_callback() will increment refcnt
4949 * of BPF program to make sure that callback_fn code stays valid.
4950 * When user space reference to a map reaches zero all timers
4951 * in a map are cancelled and corresponding program's refcnts are
4952 * decremented. This is done to make sure that Ctrl-C of a user
4953 * process doesn't leave any timers running. If map is pinned in
4954 * bpffs the callback_fn can re-arm itself indefinitely.
4955 * bpf_map_update/delete_elem() helpers and user space sys_bpf commands
4956 * cancel and free the timer in the given map element.
4957 * The map can contain timers that invoke callback_fn-s from different
4958 * programs. The same callback_fn can serve different timers from
4959 * different maps if key/value layout matches across maps.
4960 * Every bpf_timer_set_callback() can have different callback_fn.
4964 * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier
4965 * or invalid *flags* are passed.
4967 * long bpf_timer_cancel(struct bpf_timer *timer)
4969 * Cancel the timer and wait for callback_fn to finish if it was running.
4971 * 0 if the timer was not active.
4972 * 1 if the timer was active.
4973 * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier.
4974 * **-EDEADLK** if callback_fn tried to call bpf_timer_cancel() on its
4975 * own timer which would have led to a deadlock otherwise.
4977 * u64 bpf_get_func_ip(void *ctx)
4979 * Get address of the traced function (for tracing and kprobe programs).
4981 * Address of the traced function.
4982 * 0 for kprobes placed within the function (not at the entry).
4984 * u64 bpf_get_attach_cookie(void *ctx)
4986 * Get bpf_cookie value provided (optionally) during the program
4987 * attachment. It might be different for each individual
4988 * attachment, even if BPF program itself is the same.
4989 * Expects BPF program context *ctx* as a first argument.
4991 * Supported for the following program types:
4996 * Value specified by user at BPF link creation/attachment time
4997 * or 0, if it was not specified.
4999 * long bpf_task_pt_regs(struct task_struct *task)
5001 * Get the struct pt_regs associated with **task**.
5003 * A pointer to struct pt_regs.
5005 * long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags)
5007 * Get branch trace from hardware engines like Intel LBR. The
5008 * hardware engine is stopped shortly after the helper is
5009 * called. Therefore, the user need to filter branch entries
5010 * based on the actual use case. To capture branch trace
5011 * before the trigger point of the BPF program, the helper
5012 * should be called at the beginning of the BPF program.
5014 * The data is stored as struct perf_branch_entry into output
5015 * buffer *entries*. *size* is the size of *entries* in bytes.
5016 * *flags* is reserved for now and must be zero.
5019 * On success, number of bytes written to *buf*. On error, a
5022 * **-EINVAL** if *flags* is not zero.
5024 * **-ENOENT** if architecture does not support branch records.
5026 * long bpf_trace_vprintk(const char *fmt, u32 fmt_size, const void *data, u32 data_len)
5028 * Behaves like **bpf_trace_printk**\ () helper, but takes an array of u64
5029 * to format and can handle more format args as a result.
5031 * Arguments are to be used as in **bpf_seq_printf**\ () helper.
5033 * The number of bytes written to the buffer, or a negative error
5034 * in case of failure.
5036 * struct unix_sock *bpf_skc_to_unix_sock(void *sk)
5038 * Dynamically cast a *sk* pointer to a *unix_sock* pointer.
5040 * *sk* if casting is valid, or **NULL** otherwise.
5042 * long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res)
5044 * Get the address of a kernel symbol, returned in *res*. *res* is
5045 * set to 0 if the symbol is not found.
5047 * On success, zero. On error, a negative value.
5049 * **-EINVAL** if *flags* is not zero.
5051 * **-EINVAL** if string *name* is not the same size as *name_sz*.
5053 * **-ENOENT** if symbol is not found.
5055 * **-EPERM** if caller does not have permission to obtain kernel address.
5057 * long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags)
5059 * Find vma of *task* that contains *addr*, call *callback_fn*
5060 * function with *task*, *vma*, and *callback_ctx*.
5061 * The *callback_fn* should be a static function and
5062 * the *callback_ctx* should be a pointer to the stack.
5063 * The *flags* is used to control certain aspects of the helper.
5064 * Currently, the *flags* must be 0.
5066 * The expected callback signature is
5068 * long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx);
5072 * **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*.
5073 * **-EBUSY** if failed to try lock mmap_lock.
5074 * **-EINVAL** for invalid **flags**.
5076 * long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags)
5078 * For **nr_loops**, call **callback_fn** function
5079 * with **callback_ctx** as the context parameter.
5080 * The **callback_fn** should be a static function and
5081 * the **callback_ctx** should be a pointer to the stack.
5082 * The **flags** is used to control certain aspects of the helper.
5083 * Currently, the **flags** must be 0. Currently, nr_loops is
5084 * limited to 1 << 23 (~8 million) loops.
5086 * long (\*callback_fn)(u32 index, void \*ctx);
5088 * where **index** is the current index in the loop. The index
5091 * If **callback_fn** returns 0, the helper will continue to the next
5092 * loop. If return value is 1, the helper will skip the rest of
5093 * the loops and return. Other return values are not used now,
5094 * and will be rejected by the verifier.
5097 * The number of loops performed, **-EINVAL** for invalid **flags**,
5098 * **-E2BIG** if **nr_loops** exceeds the maximum number of loops.
5100 * long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2)
5102 * Do strncmp() between **s1** and **s2**. **s1** doesn't need
5103 * to be null-terminated and **s1_sz** is the maximum storage
5104 * size of **s1**. **s2** must be a read-only string.
5106 * An integer less than, equal to, or greater than zero
5107 * if the first **s1_sz** bytes of **s1** is found to be
5108 * less than, to match, or be greater than **s2**.
5110 * long bpf_get_func_arg(void *ctx, u32 n, u64 *value)
5112 * Get **n**-th argument register (zero based) of the traced function (for tracing programs)
5113 * returned in **value**.
5117 * **-EINVAL** if n >= argument register count of traced function.
5119 * long bpf_get_func_ret(void *ctx, u64 *value)
5121 * Get return value of the traced function (for tracing programs)
5126 * **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN.
5128 * long bpf_get_func_arg_cnt(void *ctx)
5130 * Get number of registers of the traced function (for tracing programs) where
5131 * function arguments are stored in these registers.
5134 * The number of argument registers of the traced function.
5136 * int bpf_get_retval(void)
5138 * Get the BPF program's return value that will be returned to the upper layers.
5140 * This helper is currently supported by cgroup programs and only by the hooks
5141 * where BPF program's return value is returned to the userspace via errno.
5143 * The BPF program's return value.
5145 * int bpf_set_retval(int retval)
5147 * Set the BPF program's return value that will be returned to the upper layers.
5149 * This helper is currently supported by cgroup programs and only by the hooks
5150 * where BPF program's return value is returned to the userspace via errno.
5152 * Note that there is the following corner case where the program exports an error
5153 * via bpf_set_retval but signals success via 'return 1':
5155 * bpf_set_retval(-EPERM);
5158 * In this case, the BPF program's return value will use helper's -EPERM. This
5159 * still holds true for cgroup/bind{4,6} which supports extra 'return 3' success case.
5162 * 0 on success, or a negative error in case of failure.
5164 * u64 bpf_xdp_get_buff_len(struct xdp_buff *xdp_md)
5166 * Get the total size of a given xdp buff (linear and paged area)
5168 * The total size of a given xdp buffer.
5170 * long bpf_xdp_load_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len)
5172 * This helper is provided as an easy way to load data from a
5173 * xdp buffer. It can be used to load *len* bytes from *offset* from
5174 * the frame associated to *xdp_md*, into the buffer pointed by
5177 * 0 on success, or a negative error in case of failure.
5179 * long bpf_xdp_store_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len)
5181 * Store *len* bytes from buffer *buf* into the frame
5182 * associated to *xdp_md*, at *offset*.
5184 * 0 on success, or a negative error in case of failure.
5186 * long bpf_copy_from_user_task(void *dst, u32 size, const void *user_ptr, struct task_struct *tsk, u64 flags)
5188 * Read *size* bytes from user space address *user_ptr* in *tsk*'s
5189 * address space, and stores the data in *dst*. *flags* is not
5190 * used yet and is provided for future extensibility. This helper
5191 * can only be used by sleepable programs.
5193 * 0 on success, or a negative error in case of failure. On error
5194 * *dst* buffer is zeroed out.
5196 * long bpf_skb_set_tstamp(struct sk_buff *skb, u64 tstamp, u32 tstamp_type)
5198 * Change the __sk_buff->tstamp_type to *tstamp_type*
5199 * and set *tstamp* to the __sk_buff->tstamp together.
5201 * If there is no need to change the __sk_buff->tstamp_type,
5202 * the tstamp value can be directly written to __sk_buff->tstamp
5205 * BPF_SKB_TSTAMP_DELIVERY_MONO is the only tstamp that
5206 * will be kept during bpf_redirect_*(). A non zero
5207 * *tstamp* must be used with the BPF_SKB_TSTAMP_DELIVERY_MONO
5210 * A BPF_SKB_TSTAMP_UNSPEC *tstamp_type* can only be used
5211 * with a zero *tstamp*.
5213 * Only IPv4 and IPv6 skb->protocol are supported.
5215 * This function is most useful when it needs to set a
5216 * mono delivery time to __sk_buff->tstamp and then
5217 * bpf_redirect_*() to the egress of an iface. For example,
5218 * changing the (rcv) timestamp in __sk_buff->tstamp at
5219 * ingress to a mono delivery time and then bpf_redirect_*()
5220 * to sch_fq@phy-dev.
5223 * **-EINVAL** for invalid input
5224 * **-EOPNOTSUPP** for unsupported protocol
5226 * long bpf_ima_file_hash(struct file *file, void *dst, u32 size)
5228 * Returns a calculated IMA hash of the *file*.
5229 * If the hash is larger than *size*, then only *size*
5230 * bytes will be copied to *dst*
5232 * The **hash_algo** is returned on success,
5233 * **-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if
5234 * invalid arguments are passed.
5236 * void *bpf_kptr_xchg(void *map_value, void *ptr)
5238 * Exchange kptr at pointer *map_value* with *ptr*, and return the
5239 * old value. *ptr* can be NULL, otherwise it must be a referenced
5240 * pointer which will be released when this helper is called.
5242 * The old value of kptr (which can be NULL). The returned pointer
5243 * if not NULL, is a reference which must be released using its
5244 * corresponding release function, or moved into a BPF map before
5247 * void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu)
5249 * Perform a lookup in *percpu map* for an entry associated to
5252 * Map value associated to *key* on *cpu*, or **NULL** if no entry
5253 * was found or *cpu* is invalid.
5255 * struct mptcp_sock *bpf_skc_to_mptcp_sock(void *sk)
5257 * Dynamically cast a *sk* pointer to a *mptcp_sock* pointer.
5259 * *sk* if casting is valid, or **NULL** otherwise.
5261 * long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr)
5263 * Get a dynptr to local memory *data*.
5265 * *data* must be a ptr to a map value.
5266 * The maximum *size* supported is DYNPTR_MAX_SIZE.
5267 * *flags* is currently unused.
5269 * 0 on success, -E2BIG if the size exceeds DYNPTR_MAX_SIZE,
5270 * -EINVAL if flags is not 0.
5272 * long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr)
5274 * Reserve *size* bytes of payload in a ring buffer *ringbuf*
5275 * through the dynptr interface. *flags* must be 0.
5277 * Please note that a corresponding bpf_ringbuf_submit_dynptr or
5278 * bpf_ringbuf_discard_dynptr must be called on *ptr*, even if the
5279 * reservation fails. This is enforced by the verifier.
5281 * 0 on success, or a negative error in case of failure.
5283 * void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags)
5285 * Submit reserved ring buffer sample, pointed to by *data*,
5286 * through the dynptr interface. This is a no-op if the dynptr is
5289 * For more information on *flags*, please see
5290 * 'bpf_ringbuf_submit'.
5292 * Nothing. Always succeeds.
5294 * void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags)
5296 * Discard reserved ring buffer sample through the dynptr
5297 * interface. This is a no-op if the dynptr is invalid/null.
5299 * For more information on *flags*, please see
5300 * 'bpf_ringbuf_discard'.
5302 * Nothing. Always succeeds.
5304 * long bpf_dynptr_read(void *dst, u32 len, struct bpf_dynptr *src, u32 offset, u64 flags)
5306 * Read *len* bytes from *src* into *dst*, starting from *offset*
5308 * *flags* is currently unused.
5310 * 0 on success, -E2BIG if *offset* + *len* exceeds the length
5311 * of *src*'s data, -EINVAL if *src* is an invalid dynptr or if
5314 * long bpf_dynptr_write(struct bpf_dynptr *dst, u32 offset, void *src, u32 len, u64 flags)
5316 * Write *len* bytes from *src* into *dst*, starting from *offset*
5318 * *flags* is currently unused.
5320 * 0 on success, -E2BIG if *offset* + *len* exceeds the length
5321 * of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst*
5322 * is a read-only dynptr or if *flags* is not 0.
5324 * void *bpf_dynptr_data(struct bpf_dynptr *ptr, u32 offset, u32 len)
5326 * Get a pointer to the underlying dynptr data.
5328 * *len* must be a statically known value. The returned data slice
5329 * is invalidated whenever the dynptr is invalidated.
5331 * Pointer to the underlying dynptr data, NULL if the dynptr is
5332 * read-only, if the dynptr is invalid, or if the offset and length
5335 * s64 bpf_tcp_raw_gen_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th, u32 th_len)
5337 * Try to issue a SYN cookie for the packet with corresponding
5338 * IPv4/TCP headers, *iph* and *th*, without depending on a
5341 * *iph* points to the IPv4 header.
5343 * *th* points to the start of the TCP header, while *th_len*
5344 * contains the length of the TCP header (at least
5345 * **sizeof**\ (**struct tcphdr**)).
5347 * On success, lower 32 bits hold the generated SYN cookie in
5348 * followed by 16 bits which hold the MSS value for that cookie,
5349 * and the top 16 bits are unused.
5351 * On failure, the returned value is one of the following:
5353 * **-EINVAL** if *th_len* is invalid.
5355 * s64 bpf_tcp_raw_gen_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th, u32 th_len)
5357 * Try to issue a SYN cookie for the packet with corresponding
5358 * IPv6/TCP headers, *iph* and *th*, without depending on a
5361 * *iph* points to the IPv6 header.
5363 * *th* points to the start of the TCP header, while *th_len*
5364 * contains the length of the TCP header (at least
5365 * **sizeof**\ (**struct tcphdr**)).
5367 * On success, lower 32 bits hold the generated SYN cookie in
5368 * followed by 16 bits which hold the MSS value for that cookie,
5369 * and the top 16 bits are unused.
5371 * On failure, the returned value is one of the following:
5373 * **-EINVAL** if *th_len* is invalid.
5375 * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin.
5377 * long bpf_tcp_raw_check_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th)
5379 * Check whether *iph* and *th* contain a valid SYN cookie ACK
5380 * without depending on a listening socket.
5382 * *iph* points to the IPv4 header.
5384 * *th* points to the TCP header.
5386 * 0 if *iph* and *th* are a valid SYN cookie ACK.
5388 * On failure, the returned value is one of the following:
5390 * **-EACCES** if the SYN cookie is not valid.
5392 * long bpf_tcp_raw_check_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th)
5394 * Check whether *iph* and *th* contain a valid SYN cookie ACK
5395 * without depending on a listening socket.
5397 * *iph* points to the IPv6 header.
5399 * *th* points to the TCP header.
5401 * 0 if *iph* and *th* are a valid SYN cookie ACK.
5403 * On failure, the returned value is one of the following:
5405 * **-EACCES** if the SYN cookie is not valid.
5407 * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin.
5409 * u64 bpf_ktime_get_tai_ns(void)
5411 * A nonsettable system-wide clock derived from wall-clock time but
5412 * ignoring leap seconds. This clock does not experience
5413 * discontinuities and backwards jumps caused by NTP inserting leap
5414 * seconds as CLOCK_REALTIME does.
5416 * See: **clock_gettime**\ (**CLOCK_TAI**)
5420 * long bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx, u64 flags)
5422 * Drain samples from the specified user ring buffer, and invoke
5423 * the provided callback for each such sample:
5425 * long (\*callback_fn)(struct bpf_dynptr \*dynptr, void \*ctx);
5427 * If **callback_fn** returns 0, the helper will continue to try
5428 * and drain the next sample, up to a maximum of
5429 * BPF_MAX_USER_RINGBUF_SAMPLES samples. If the return value is 1,
5430 * the helper will skip the rest of the samples and return. Other
5431 * return values are not used now, and will be rejected by the
5434 * The number of drained samples if no error was encountered while
5435 * draining samples, or 0 if no samples were present in the ring
5436 * buffer. If a user-space producer was epoll-waiting on this map,
5437 * and at least one sample was drained, they will receive an event
5438 * notification notifying them of available space in the ring
5439 * buffer. If the BPF_RB_NO_WAKEUP flag is passed to this
5440 * function, no wakeup notification will be sent. If the
5441 * BPF_RB_FORCE_WAKEUP flag is passed, a wakeup notification will
5442 * be sent even if no sample was drained.
5444 * On failure, the returned value is one of the following:
5446 * **-EBUSY** if the ring buffer is contended, and another calling
5447 * context was concurrently draining the ring buffer.
5449 * **-EINVAL** if user-space is not properly tracking the ring
5450 * buffer due to the producer position not being aligned to 8
5451 * bytes, a sample not being aligned to 8 bytes, or the producer
5452 * position not matching the advertised length of a sample.
5454 * **-E2BIG** if user-space has tried to publish a sample which is
5455 * larger than the size of the ring buffer, or which cannot fit
5456 * within a struct bpf_dynptr.
5458 #define __BPF_FUNC_MAPPER(FN) \
5460 FN(map_lookup_elem), \
5461 FN(map_update_elem), \
5462 FN(map_delete_elem), \
5466 FN(get_prandom_u32), \
5467 FN(get_smp_processor_id), \
5468 FN(skb_store_bytes), \
5469 FN(l3_csum_replace), \
5470 FN(l4_csum_replace), \
5472 FN(clone_redirect), \
5473 FN(get_current_pid_tgid), \
5474 FN(get_current_uid_gid), \
5475 FN(get_current_comm), \
5476 FN(get_cgroup_classid), \
5477 FN(skb_vlan_push), \
5479 FN(skb_get_tunnel_key), \
5480 FN(skb_set_tunnel_key), \
5481 FN(perf_event_read), \
5483 FN(get_route_realm), \
5484 FN(perf_event_output), \
5485 FN(skb_load_bytes), \
5488 FN(skb_get_tunnel_opt), \
5489 FN(skb_set_tunnel_opt), \
5490 FN(skb_change_proto), \
5491 FN(skb_change_type), \
5492 FN(skb_under_cgroup), \
5493 FN(get_hash_recalc), \
5494 FN(get_current_task), \
5495 FN(probe_write_user), \
5496 FN(current_task_under_cgroup), \
5497 FN(skb_change_tail), \
5498 FN(skb_pull_data), \
5500 FN(set_hash_invalid), \
5501 FN(get_numa_node_id), \
5502 FN(skb_change_head), \
5503 FN(xdp_adjust_head), \
5504 FN(probe_read_str), \
5505 FN(get_socket_cookie), \
5506 FN(get_socket_uid), \
5509 FN(skb_adjust_room), \
5511 FN(sk_redirect_map), \
5512 FN(sock_map_update), \
5513 FN(xdp_adjust_meta), \
5514 FN(perf_event_read_value), \
5515 FN(perf_prog_read_value), \
5517 FN(override_return), \
5518 FN(sock_ops_cb_flags_set), \
5519 FN(msg_redirect_map), \
5520 FN(msg_apply_bytes), \
5521 FN(msg_cork_bytes), \
5522 FN(msg_pull_data), \
5524 FN(xdp_adjust_tail), \
5525 FN(skb_get_xfrm_state), \
5527 FN(skb_load_bytes_relative), \
5529 FN(sock_hash_update), \
5530 FN(msg_redirect_hash), \
5531 FN(sk_redirect_hash), \
5532 FN(lwt_push_encap), \
5533 FN(lwt_seg6_store_bytes), \
5534 FN(lwt_seg6_adjust_srh), \
5535 FN(lwt_seg6_action), \
5538 FN(skb_cgroup_id), \
5539 FN(get_current_cgroup_id), \
5540 FN(get_local_storage), \
5541 FN(sk_select_reuseport), \
5542 FN(skb_ancestor_cgroup_id), \
5543 FN(sk_lookup_tcp), \
5544 FN(sk_lookup_udp), \
5546 FN(map_push_elem), \
5548 FN(map_peek_elem), \
5549 FN(msg_push_data), \
5551 FN(rc_pointer_rel), \
5556 FN(skb_ecn_set_ce), \
5557 FN(get_listener_sock), \
5558 FN(skc_lookup_tcp), \
5559 FN(tcp_check_syncookie), \
5560 FN(sysctl_get_name), \
5561 FN(sysctl_get_current_value), \
5562 FN(sysctl_get_new_value), \
5563 FN(sysctl_set_new_value), \
5566 FN(sk_storage_get), \
5567 FN(sk_storage_delete), \
5569 FN(tcp_gen_syncookie), \
5571 FN(probe_read_user), \
5572 FN(probe_read_kernel), \
5573 FN(probe_read_user_str), \
5574 FN(probe_read_kernel_str), \
5576 FN(send_signal_thread), \
5578 FN(read_branch_records), \
5579 FN(get_ns_current_pid_tgid), \
5581 FN(get_netns_cookie), \
5582 FN(get_current_ancestor_cgroup_id), \
5584 FN(ktime_get_boot_ns), \
5588 FN(sk_ancestor_cgroup_id), \
5589 FN(ringbuf_output), \
5590 FN(ringbuf_reserve), \
5591 FN(ringbuf_submit), \
5592 FN(ringbuf_discard), \
5593 FN(ringbuf_query), \
5595 FN(skc_to_tcp6_sock), \
5596 FN(skc_to_tcp_sock), \
5597 FN(skc_to_tcp_timewait_sock), \
5598 FN(skc_to_tcp_request_sock), \
5599 FN(skc_to_udp6_sock), \
5600 FN(get_task_stack), \
5602 FN(store_hdr_opt), \
5603 FN(reserve_hdr_opt), \
5604 FN(inode_storage_get), \
5605 FN(inode_storage_delete), \
5607 FN(copy_from_user), \
5609 FN(seq_printf_btf), \
5610 FN(skb_cgroup_classid), \
5611 FN(redirect_neigh), \
5614 FN(redirect_peer), \
5615 FN(task_storage_get), \
5616 FN(task_storage_delete), \
5617 FN(get_current_task_btf), \
5618 FN(bprm_opts_set), \
5619 FN(ktime_get_coarse_ns), \
5620 FN(ima_inode_hash), \
5621 FN(sock_from_file), \
5623 FN(for_each_map_elem), \
5626 FN(btf_find_by_name_kind), \
5629 FN(timer_set_callback), \
5633 FN(get_attach_cookie), \
5635 FN(get_branch_snapshot), \
5636 FN(trace_vprintk), \
5637 FN(skc_to_unix_sock), \
5638 FN(kallsyms_lookup_name), \
5644 FN(get_func_arg_cnt), \
5647 FN(xdp_get_buff_len), \
5648 FN(xdp_load_bytes), \
5649 FN(xdp_store_bytes), \
5650 FN(copy_from_user_task), \
5651 FN(skb_set_tstamp), \
5652 FN(ima_file_hash), \
5654 FN(map_lookup_percpu_elem), \
5655 FN(skc_to_mptcp_sock), \
5656 FN(dynptr_from_mem), \
5657 FN(ringbuf_reserve_dynptr), \
5658 FN(ringbuf_submit_dynptr), \
5659 FN(ringbuf_discard_dynptr), \
5663 FN(tcp_raw_gen_syncookie_ipv4), \
5664 FN(tcp_raw_gen_syncookie_ipv6), \
5665 FN(tcp_raw_check_syncookie_ipv4), \
5666 FN(tcp_raw_check_syncookie_ipv6), \
5667 FN(ktime_get_tai_ns), \
5668 FN(user_ringbuf_drain), \
5671 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
5672 * function eBPF program intends to call
5674 #define __BPF_ENUM_FN(x) BPF_FUNC_ ## x
5676 __BPF_FUNC_MAPPER(__BPF_ENUM_FN)
5679 #undef __BPF_ENUM_FN
5681 /* All flags used by eBPF helper functions, placed here. */
5683 /* BPF_FUNC_skb_store_bytes flags. */
5685 BPF_F_RECOMPUTE_CSUM = (1ULL << 0),
5686 BPF_F_INVALIDATE_HASH = (1ULL << 1),
5689 /* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags.
5690 * First 4 bits are for passing the header field size.
5693 BPF_F_HDR_FIELD_MASK = 0xfULL,
5696 /* BPF_FUNC_l4_csum_replace flags. */
5698 BPF_F_PSEUDO_HDR = (1ULL << 4),
5699 BPF_F_MARK_MANGLED_0 = (1ULL << 5),
5700 BPF_F_MARK_ENFORCE = (1ULL << 6),
5703 /* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */
5705 BPF_F_INGRESS = (1ULL << 0),
5708 /* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */
5710 BPF_F_TUNINFO_IPV6 = (1ULL << 0),
5713 /* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */
5715 BPF_F_SKIP_FIELD_MASK = 0xffULL,
5716 BPF_F_USER_STACK = (1ULL << 8),
5717 /* flags used by BPF_FUNC_get_stackid only. */
5718 BPF_F_FAST_STACK_CMP = (1ULL << 9),
5719 BPF_F_REUSE_STACKID = (1ULL << 10),
5720 /* flags used by BPF_FUNC_get_stack only. */
5721 BPF_F_USER_BUILD_ID = (1ULL << 11),
5724 /* BPF_FUNC_skb_set_tunnel_key flags. */
5726 BPF_F_ZERO_CSUM_TX = (1ULL << 1),
5727 BPF_F_DONT_FRAGMENT = (1ULL << 2),
5728 BPF_F_SEQ_NUMBER = (1ULL << 3),
5731 /* BPF_FUNC_skb_get_tunnel_key flags. */
5733 BPF_F_TUNINFO_FLAGS = (1ULL << 4),
5736 /* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and
5737 * BPF_FUNC_perf_event_read_value flags.
5740 BPF_F_INDEX_MASK = 0xffffffffULL,
5741 BPF_F_CURRENT_CPU = BPF_F_INDEX_MASK,
5742 /* BPF_FUNC_perf_event_output for sk_buff input context. */
5743 BPF_F_CTXLEN_MASK = (0xfffffULL << 32),
5746 /* Current network namespace */
5748 BPF_F_CURRENT_NETNS = (-1L),
5751 /* BPF_FUNC_csum_level level values. */
5753 BPF_CSUM_LEVEL_QUERY,
5756 BPF_CSUM_LEVEL_RESET,
5759 /* BPF_FUNC_skb_adjust_room flags. */
5761 BPF_F_ADJ_ROOM_FIXED_GSO = (1ULL << 0),
5762 BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 = (1ULL << 1),
5763 BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 = (1ULL << 2),
5764 BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3),
5765 BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4),
5766 BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5),
5767 BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6),
5771 BPF_ADJ_ROOM_ENCAP_L2_MASK = 0xff,
5772 BPF_ADJ_ROOM_ENCAP_L2_SHIFT = 56,
5775 #define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \
5776 BPF_ADJ_ROOM_ENCAP_L2_MASK) \
5777 << BPF_ADJ_ROOM_ENCAP_L2_SHIFT)
5779 /* BPF_FUNC_sysctl_get_name flags. */
5781 BPF_F_SYSCTL_BASE_NAME = (1ULL << 0),
5784 /* BPF_FUNC_<kernel_obj>_storage_get flags */
5786 BPF_LOCAL_STORAGE_GET_F_CREATE = (1ULL << 0),
5787 /* BPF_SK_STORAGE_GET_F_CREATE is only kept for backward compatibility
5788 * and BPF_LOCAL_STORAGE_GET_F_CREATE must be used instead.
5790 BPF_SK_STORAGE_GET_F_CREATE = BPF_LOCAL_STORAGE_GET_F_CREATE,
5793 /* BPF_FUNC_read_branch_records flags. */
5795 BPF_F_GET_BRANCH_RECORDS_SIZE = (1ULL << 0),
5798 /* BPF_FUNC_bpf_ringbuf_commit, BPF_FUNC_bpf_ringbuf_discard, and
5799 * BPF_FUNC_bpf_ringbuf_output flags.
5802 BPF_RB_NO_WAKEUP = (1ULL << 0),
5803 BPF_RB_FORCE_WAKEUP = (1ULL << 1),
5806 /* BPF_FUNC_bpf_ringbuf_query flags */
5808 BPF_RB_AVAIL_DATA = 0,
5809 BPF_RB_RING_SIZE = 1,
5810 BPF_RB_CONS_POS = 2,
5811 BPF_RB_PROD_POS = 3,
5814 /* BPF ring buffer constants */
5816 BPF_RINGBUF_BUSY_BIT = (1U << 31),
5817 BPF_RINGBUF_DISCARD_BIT = (1U << 30),
5818 BPF_RINGBUF_HDR_SZ = 8,
5821 /* BPF_FUNC_sk_assign flags in bpf_sk_lookup context. */
5823 BPF_SK_LOOKUP_F_REPLACE = (1ULL << 0),
5824 BPF_SK_LOOKUP_F_NO_REUSEPORT = (1ULL << 1),
5827 /* Mode for BPF_FUNC_skb_adjust_room helper. */
5828 enum bpf_adj_room_mode {
5833 /* Mode for BPF_FUNC_skb_load_bytes_relative helper. */
5834 enum bpf_hdr_start_off {
5839 /* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */
5840 enum bpf_lwt_encap_mode {
5842 BPF_LWT_ENCAP_SEG6_INLINE,
5846 /* Flags for bpf_bprm_opts_set helper */
5848 BPF_F_BPRM_SECUREEXEC = (1ULL << 0),
5851 /* Flags for bpf_redirect_map helper */
5853 BPF_F_BROADCAST = (1ULL << 3),
5854 BPF_F_EXCLUDE_INGRESS = (1ULL << 4),
5857 #define __bpf_md_ptr(type, name) \
5861 } __attribute__((aligned(8)))
5864 BPF_SKB_TSTAMP_UNSPEC,
5865 BPF_SKB_TSTAMP_DELIVERY_MONO, /* tstamp has mono delivery time */
5866 /* For any BPF_SKB_TSTAMP_* that the bpf prog cannot handle,
5867 * the bpf prog should handle it like BPF_SKB_TSTAMP_UNSPEC
5868 * and try to deduce it by ingress, egress or skb->sk->sk_clockid.
5872 /* user accessible mirror of in-kernel sk_buff.
5873 * new fields can only be added to the end of this structure
5879 __u32 queue_mapping;
5885 __u32 ingress_ifindex;
5895 /* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */
5897 __u32 remote_ip4; /* Stored in network byte order */
5898 __u32 local_ip4; /* Stored in network byte order */
5899 __u32 remote_ip6[4]; /* Stored in network byte order */
5900 __u32 local_ip6[4]; /* Stored in network byte order */
5901 __u32 remote_port; /* Stored in network byte order */
5902 __u32 local_port; /* stored in host byte order */
5906 __bpf_md_ptr(struct bpf_flow_keys *, flow_keys);
5910 __bpf_md_ptr(struct bpf_sock *, sk);
5913 __u32 :24; /* Padding, future use. */
5917 struct bpf_tunnel_key {
5921 __u32 remote_ipv6[4];
5926 __u16 tunnel_ext; /* compat */
5927 __be16 tunnel_flags;
5932 __u32 local_ipv6[4];
5936 /* user accessible mirror of in-kernel xfrm_state.
5937 * new fields can only be added to the end of this structure
5939 struct bpf_xfrm_state {
5941 __u32 spi; /* Stored in network byte order */
5943 __u16 ext; /* Padding, future use. */
5945 __u32 remote_ipv4; /* Stored in network byte order */
5946 __u32 remote_ipv6[4]; /* Stored in network byte order */
5950 /* Generic BPF return codes which all BPF program types may support.
5951 * The values are binary compatible with their TC_ACT_* counter-part to
5952 * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT
5955 * XDP is handled seprately, see XDP_*.
5963 /* >127 are reserved for prog type specific return codes.
5965 * BPF_LWT_REROUTE: used by BPF_PROG_TYPE_LWT_IN and
5966 * BPF_PROG_TYPE_LWT_XMIT to indicate that skb had been
5967 * changed and should be routed based on its new L3 header.
5968 * (This is an L3 redirect, as opposed to L2 redirect
5969 * represented by BPF_REDIRECT above).
5971 BPF_LWT_REROUTE = 128,
5972 /* BPF_FLOW_DISSECTOR_CONTINUE: used by BPF_PROG_TYPE_FLOW_DISSECTOR
5973 * to indicate that no custom dissection was performed, and
5974 * fallback to standard dissector is requested.
5976 BPF_FLOW_DISSECTOR_CONTINUE = 129,
5986 /* IP address also allows 1 and 2 bytes access */
5989 __u32 src_port; /* host byte order */
5990 __be16 dst_port; /* network byte order */
5991 __u16 :16; /* zero padding */
5995 __s32 rx_queue_mapping;
5998 struct bpf_tcp_sock {
5999 __u32 snd_cwnd; /* Sending congestion window */
6000 __u32 srtt_us; /* smoothed round trip time << 3 in usecs */
6002 __u32 snd_ssthresh; /* Slow start size threshold */
6003 __u32 rcv_nxt; /* What we want to receive next */
6004 __u32 snd_nxt; /* Next sequence we send */
6005 __u32 snd_una; /* First byte we want an ack for */
6006 __u32 mss_cache; /* Cached effective mss, not including SACKS */
6007 __u32 ecn_flags; /* ECN status bits. */
6008 __u32 rate_delivered; /* saved rate sample: packets delivered */
6009 __u32 rate_interval_us; /* saved rate sample: time elapsed */
6010 __u32 packets_out; /* Packets which are "in flight" */
6011 __u32 retrans_out; /* Retransmitted packets out */
6012 __u32 total_retrans; /* Total retransmits for entire connection */
6013 __u32 segs_in; /* RFC4898 tcpEStatsPerfSegsIn
6014 * total number of segments in.
6016 __u32 data_segs_in; /* RFC4898 tcpEStatsPerfDataSegsIn
6017 * total number of data segments in.
6019 __u32 segs_out; /* RFC4898 tcpEStatsPerfSegsOut
6020 * The total number of segments sent.
6022 __u32 data_segs_out; /* RFC4898 tcpEStatsPerfDataSegsOut
6023 * total number of data segments sent.
6025 __u32 lost_out; /* Lost packets */
6026 __u32 sacked_out; /* SACK'd packets */
6027 __u64 bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived
6028 * sum(delta(rcv_nxt)), or how many bytes
6031 __u64 bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked
6032 * sum(delta(snd_una)), or how many bytes
6035 __u32 dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups
6036 * total number of DSACK blocks received
6038 __u32 delivered; /* Total data packets delivered incl. rexmits */
6039 __u32 delivered_ce; /* Like the above but only ECE marked packets */
6040 __u32 icsk_retransmits; /* Number of unrecovered [RTO] timeouts */
6043 struct bpf_sock_tuple {
6060 struct bpf_xdp_sock {
6064 #define XDP_PACKET_HEADROOM 256
6066 /* User return codes for XDP prog type.
6067 * A valid XDP program must return one of these defined values. All other
6068 * return codes are reserved for future use. Unknown return codes will
6069 * result in packet drops and a warning via bpf_warn_invalid_xdp_action().
6079 /* user accessible metadata for XDP packet hook
6080 * new fields must be added to the end of this structure
6086 /* Below access go through struct xdp_rxq_info */
6087 __u32 ingress_ifindex; /* rxq->dev->ifindex */
6088 __u32 rx_queue_index; /* rxq->queue_index */
6090 __u32 egress_ifindex; /* txq->dev->ifindex */
6093 /* DEVMAP map-value layout
6095 * The struct data-layout of map-value is a configuration interface.
6096 * New members can only be added to the end of this structure.
6098 struct bpf_devmap_val {
6099 __u32 ifindex; /* device index */
6101 int fd; /* prog fd on map write */
6102 __u32 id; /* prog id on map read */
6106 /* CPUMAP map-value layout
6108 * The struct data-layout of map-value is a configuration interface.
6109 * New members can only be added to the end of this structure.
6111 struct bpf_cpumap_val {
6112 __u32 qsize; /* queue size to remote target CPU */
6114 int fd; /* prog fd on map write */
6115 __u32 id; /* prog id on map read */
6124 /* user accessible metadata for SK_MSG packet hook, new fields must
6125 * be added to the end of this structure
6128 __bpf_md_ptr(void *, data);
6129 __bpf_md_ptr(void *, data_end);
6132 __u32 remote_ip4; /* Stored in network byte order */
6133 __u32 local_ip4; /* Stored in network byte order */
6134 __u32 remote_ip6[4]; /* Stored in network byte order */
6135 __u32 local_ip6[4]; /* Stored in network byte order */
6136 __u32 remote_port; /* Stored in network byte order */
6137 __u32 local_port; /* stored in host byte order */
6138 __u32 size; /* Total size of sk_msg */
6140 __bpf_md_ptr(struct bpf_sock *, sk); /* current socket */
6143 struct sk_reuseport_md {
6145 * Start of directly accessible data. It begins from
6146 * the tcp/udp header.
6148 __bpf_md_ptr(void *, data);
6149 /* End of directly accessible data */
6150 __bpf_md_ptr(void *, data_end);
6152 * Total length of packet (starting from the tcp/udp header).
6153 * Note that the directly accessible bytes (data_end - data)
6154 * could be less than this "len". Those bytes could be
6155 * indirectly read by a helper "bpf_skb_load_bytes()".
6159 * Eth protocol in the mac header (network byte order). e.g.
6160 * ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD)
6163 __u32 ip_protocol; /* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */
6164 __u32 bind_inany; /* Is sock bound to an INANY address? */
6165 __u32 hash; /* A hash of the packet 4 tuples */
6166 /* When reuse->migrating_sk is NULL, it is selecting a sk for the
6167 * new incoming connection request (e.g. selecting a listen sk for
6168 * the received SYN in the TCP case). reuse->sk is one of the sk
6169 * in the reuseport group. The bpf prog can use reuse->sk to learn
6170 * the local listening ip/port without looking into the skb.
6172 * When reuse->migrating_sk is not NULL, reuse->sk is closed and
6173 * reuse->migrating_sk is the socket that needs to be migrated
6174 * to another listening socket. migrating_sk could be a fullsock
6175 * sk that is fully established or a reqsk that is in-the-middle
6176 * of 3-way handshake.
6178 __bpf_md_ptr(struct bpf_sock *, sk);
6179 __bpf_md_ptr(struct bpf_sock *, migrating_sk);
6182 #define BPF_TAG_SIZE 8
6184 struct bpf_prog_info {
6187 __u8 tag[BPF_TAG_SIZE];
6188 __u32 jited_prog_len;
6189 __u32 xlated_prog_len;
6190 __aligned_u64 jited_prog_insns;
6191 __aligned_u64 xlated_prog_insns;
6192 __u64 load_time; /* ns since boottime */
6193 __u32 created_by_uid;
6195 __aligned_u64 map_ids;
6196 char name[BPF_OBJ_NAME_LEN];
6198 __u32 gpl_compatible:1;
6199 __u32 :31; /* alignment pad */
6202 __u32 nr_jited_ksyms;
6203 __u32 nr_jited_func_lens;
6204 __aligned_u64 jited_ksyms;
6205 __aligned_u64 jited_func_lens;
6207 __u32 func_info_rec_size;
6208 __aligned_u64 func_info;
6211 __aligned_u64 line_info;
6212 __aligned_u64 jited_line_info;
6213 __u32 nr_jited_line_info;
6214 __u32 line_info_rec_size;
6215 __u32 jited_line_info_rec_size;
6217 __aligned_u64 prog_tags;
6220 __u64 recursion_misses;
6221 __u32 verified_insns;
6222 __u32 attach_btf_obj_id;
6223 __u32 attach_btf_id;
6224 } __attribute__((aligned(8)));
6226 struct bpf_map_info {
6233 char name[BPF_OBJ_NAME_LEN];
6235 __u32 btf_vmlinux_value_type_id;
6239 __u32 btf_key_type_id;
6240 __u32 btf_value_type_id;
6241 __u32 :32; /* alignment pad */
6243 } __attribute__((aligned(8)));
6245 struct bpf_btf_info {
6252 } __attribute__((aligned(8)));
6254 struct bpf_link_info {
6260 __aligned_u64 tp_name; /* in/out: tp_name buffer ptr */
6261 __u32 tp_name_len; /* in/out: tp_name buffer len */
6265 __u32 target_obj_id; /* prog_id for PROG_EXT, otherwise btf object id */
6266 __u32 target_btf_id; /* BTF type id inside the object */
6273 __aligned_u64 target_name; /* in/out: target_name buffer ptr */
6274 __u32 target_name_len; /* in/out: target_name buffer len */
6276 /* If the iter specific field is 32 bits, it can be put
6277 * in the first or second union. Otherwise it should be
6278 * put in the second union.
6304 } __attribute__((aligned(8)));
6306 /* User bpf_sock_addr struct to access socket fields and sockaddr struct passed
6307 * by user and intended to be used by socket (e.g. to bind to, depends on
6310 struct bpf_sock_addr {
6311 __u32 user_family; /* Allows 4-byte read, but no write. */
6312 __u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write.
6313 * Stored in network byte order.
6315 __u32 user_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write.
6316 * Stored in network byte order.
6318 __u32 user_port; /* Allows 1,2,4-byte read and 4-byte write.
6319 * Stored in network byte order
6321 __u32 family; /* Allows 4-byte read, but no write */
6322 __u32 type; /* Allows 4-byte read, but no write */
6323 __u32 protocol; /* Allows 4-byte read, but no write */
6324 __u32 msg_src_ip4; /* Allows 1,2,4-byte read and 4-byte write.
6325 * Stored in network byte order.
6327 __u32 msg_src_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write.
6328 * Stored in network byte order.
6330 __bpf_md_ptr(struct bpf_sock *, sk);
6333 /* User bpf_sock_ops struct to access socket values and specify request ops
6334 * and their replies.
6335 * Some of this fields are in network (bigendian) byte order and may need
6336 * to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h).
6337 * New fields can only be added at the end of this structure
6339 struct bpf_sock_ops {
6342 __u32 args[4]; /* Optionally passed to bpf program */
6343 __u32 reply; /* Returned by bpf program */
6344 __u32 replylong[4]; /* Optionally returned by bpf prog */
6347 __u32 remote_ip4; /* Stored in network byte order */
6348 __u32 local_ip4; /* Stored in network byte order */
6349 __u32 remote_ip6[4]; /* Stored in network byte order */
6350 __u32 local_ip6[4]; /* Stored in network byte order */
6351 __u32 remote_port; /* Stored in network byte order */
6352 __u32 local_port; /* stored in host byte order */
6353 __u32 is_fullsock; /* Some TCP fields are only valid if
6354 * there is a full socket. If not, the
6355 * fields read as zero.
6358 __u32 srtt_us; /* Averaged RTT << 3 in usecs */
6359 __u32 bpf_sock_ops_cb_flags; /* flags defined in uapi/linux/tcp.h */
6368 __u32 rate_delivered;
6369 __u32 rate_interval_us;
6372 __u32 total_retrans;
6376 __u32 data_segs_out;
6380 __u64 bytes_received;
6382 __bpf_md_ptr(struct bpf_sock *, sk);
6383 /* [skb_data, skb_data_end) covers the whole TCP header.
6385 * BPF_SOCK_OPS_PARSE_HDR_OPT_CB: The packet received
6386 * BPF_SOCK_OPS_HDR_OPT_LEN_CB: Not useful because the
6387 * header has not been written.
6388 * BPF_SOCK_OPS_WRITE_HDR_OPT_CB: The header and options have
6389 * been written so far.
6390 * BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB: The SYNACK that concludes
6392 * BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB: The ACK that concludes
6395 * bpf_load_hdr_opt() can also be used to read a particular option.
6397 __bpf_md_ptr(void *, skb_data);
6398 __bpf_md_ptr(void *, skb_data_end);
6399 __u32 skb_len; /* The total length of a packet.
6400 * It includes the header, options,
6403 __u32 skb_tcp_flags; /* tcp_flags of the header. It provides
6404 * an easy way to check for tcp_flags
6405 * without parsing skb_data.
6407 * In particular, the skb_tcp_flags
6408 * will still be available in
6409 * BPF_SOCK_OPS_HDR_OPT_LEN even though
6410 * the outgoing header has not
6415 /* Definitions for bpf_sock_ops_cb_flags */
6417 BPF_SOCK_OPS_RTO_CB_FLAG = (1<<0),
6418 BPF_SOCK_OPS_RETRANS_CB_FLAG = (1<<1),
6419 BPF_SOCK_OPS_STATE_CB_FLAG = (1<<2),
6420 BPF_SOCK_OPS_RTT_CB_FLAG = (1<<3),
6421 /* Call bpf for all received TCP headers. The bpf prog will be
6422 * called under sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB
6424 * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB
6425 * for the header option related helpers that will be useful
6426 * to the bpf programs.
6428 * It could be used at the client/active side (i.e. connect() side)
6429 * when the server told it that the server was in syncookie
6430 * mode and required the active side to resend the bpf-written
6431 * options. The active side can keep writing the bpf-options until
6432 * it received a valid packet from the server side to confirm
6433 * the earlier packet (and options) has been received. The later
6434 * example patch is using it like this at the active side when the
6435 * server is in syncookie mode.
6437 * The bpf prog will usually turn this off in the common cases.
6439 BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG = (1<<4),
6440 /* Call bpf when kernel has received a header option that
6441 * the kernel cannot handle. The bpf prog will be called under
6442 * sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB.
6444 * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB
6445 * for the header option related helpers that will be useful
6446 * to the bpf programs.
6448 BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG = (1<<5),
6449 /* Call bpf when the kernel is writing header options for the
6450 * outgoing packet. The bpf prog will first be called
6451 * to reserve space in a skb under
6452 * sock_ops->op == BPF_SOCK_OPS_HDR_OPT_LEN_CB. Then
6453 * the bpf prog will be called to write the header option(s)
6454 * under sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
6456 * Please refer to the comment in BPF_SOCK_OPS_HDR_OPT_LEN_CB
6457 * and BPF_SOCK_OPS_WRITE_HDR_OPT_CB for the header option
6458 * related helpers that will be useful to the bpf programs.
6460 * The kernel gets its chance to reserve space and write
6461 * options first before the BPF program does.
6463 BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG = (1<<6),
6464 /* Mask of all currently supported cb flags */
6465 BPF_SOCK_OPS_ALL_CB_FLAGS = 0x7F,
6468 /* List of known BPF sock_ops operators.
6469 * New entries can only be added at the end
6473 BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or
6474 * -1 if default value should be used
6476 BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized
6477 * window (in packets) or -1 if default
6478 * value should be used
6480 BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an
6481 * active connection is initialized
6483 BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an
6484 * active connection is
6487 BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a
6488 * passive connection is
6491 BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control
6494 BPF_SOCK_OPS_BASE_RTT, /* Get base RTT. The correct value is
6495 * based on the path and may be
6496 * dependent on the congestion control
6497 * algorithm. In general it indicates
6498 * a congestion threshold. RTTs above
6499 * this indicate congestion
6501 BPF_SOCK_OPS_RTO_CB, /* Called when an RTO has triggered.
6502 * Arg1: value of icsk_retransmits
6503 * Arg2: value of icsk_rto
6504 * Arg3: whether RTO has expired
6506 BPF_SOCK_OPS_RETRANS_CB, /* Called when skb is retransmitted.
6507 * Arg1: sequence number of 1st byte
6509 * Arg3: return value of
6510 * tcp_transmit_skb (0 => success)
6512 BPF_SOCK_OPS_STATE_CB, /* Called when TCP changes state.
6516 BPF_SOCK_OPS_TCP_LISTEN_CB, /* Called on listen(2), right after
6517 * socket transition to LISTEN state.
6519 BPF_SOCK_OPS_RTT_CB, /* Called on every RTT.
6521 BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option.
6522 * It will be called to handle
6523 * the packets received at
6524 * an already established
6527 * sock_ops->skb_data:
6528 * Referring to the received skb.
6529 * It covers the TCP header only.
6531 * bpf_load_hdr_opt() can also
6532 * be used to search for a
6533 * particular option.
6535 BPF_SOCK_OPS_HDR_OPT_LEN_CB, /* Reserve space for writing the
6536 * header option later in
6537 * BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
6538 * Arg1: bool want_cookie. (in
6539 * writing SYNACK only)
6541 * sock_ops->skb_data:
6542 * Not available because no header has
6545 * sock_ops->skb_tcp_flags:
6546 * The tcp_flags of the
6547 * outgoing skb. (e.g. SYN, ACK, FIN).
6549 * bpf_reserve_hdr_opt() should
6550 * be used to reserve space.
6552 BPF_SOCK_OPS_WRITE_HDR_OPT_CB, /* Write the header options
6553 * Arg1: bool want_cookie. (in
6554 * writing SYNACK only)
6556 * sock_ops->skb_data:
6557 * Referring to the outgoing skb.
6558 * It covers the TCP header
6559 * that has already been written
6560 * by the kernel and the
6561 * earlier bpf-progs.
6563 * sock_ops->skb_tcp_flags:
6564 * The tcp_flags of the outgoing
6565 * skb. (e.g. SYN, ACK, FIN).
6567 * bpf_store_hdr_opt() should
6568 * be used to write the
6571 * bpf_load_hdr_opt() can also
6572 * be used to search for a
6573 * particular option that
6574 * has already been written
6575 * by the kernel or the
6576 * earlier bpf-progs.
6580 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
6581 * changes between the TCP and BPF versions. Ideally this should never happen.
6582 * If it does, we need to add code to convert them before calling
6583 * the BPF sock_ops function.
6586 BPF_TCP_ESTABLISHED = 1,
6596 BPF_TCP_CLOSING, /* Now a valid state */
6597 BPF_TCP_NEW_SYN_RECV,
6599 BPF_TCP_MAX_STATES /* Leave at the end! */
6603 TCP_BPF_IW = 1001, /* Set TCP initial congestion window */
6604 TCP_BPF_SNDCWND_CLAMP = 1002, /* Set sndcwnd_clamp */
6605 TCP_BPF_DELACK_MAX = 1003, /* Max delay ack in usecs */
6606 TCP_BPF_RTO_MIN = 1004, /* Min delay ack in usecs */
6607 /* Copy the SYN pkt to optval
6609 * BPF_PROG_TYPE_SOCK_OPS only. It is similar to the
6610 * bpf_getsockopt(TCP_SAVED_SYN) but it does not limit
6611 * to only getting from the saved_syn. It can either get the
6614 * 1. the just-received SYN packet (only available when writing the
6615 * SYNACK). It will be useful when it is not necessary to
6616 * save the SYN packet for latter use. It is also the only way
6617 * to get the SYN during syncookie mode because the syn
6618 * packet cannot be saved during syncookie.
6622 * 2. the earlier saved syn which was done by
6623 * bpf_setsockopt(TCP_SAVE_SYN).
6625 * The bpf_getsockopt(TCP_BPF_SYN*) option will hide where the
6626 * SYN packet is obtained.
6628 * If the bpf-prog does not need the IP[46] header, the
6629 * bpf-prog can avoid parsing the IP header by using
6630 * TCP_BPF_SYN. Otherwise, the bpf-prog can get both
6631 * IP[46] and TCP header by using TCP_BPF_SYN_IP.
6633 * >0: Total number of bytes copied
6634 * -ENOSPC: Not enough space in optval. Only optlen number of
6636 * -ENOENT: The SYN skb is not available now and the earlier SYN pkt
6637 * is not saved by setsockopt(TCP_SAVE_SYN).
6639 TCP_BPF_SYN = 1005, /* Copy the TCP header */
6640 TCP_BPF_SYN_IP = 1006, /* Copy the IP[46] and TCP header */
6641 TCP_BPF_SYN_MAC = 1007, /* Copy the MAC, IP[46], and TCP header */
6645 BPF_LOAD_HDR_OPT_TCP_SYN = (1ULL << 0),
6648 /* args[0] value during BPF_SOCK_OPS_HDR_OPT_LEN_CB and
6649 * BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
6652 BPF_WRITE_HDR_TCP_CURRENT_MSS = 1, /* Kernel is finding the
6653 * total option spaces
6654 * required for an established
6655 * sk in order to calculate the
6656 * MSS. No skb is actually
6659 BPF_WRITE_HDR_TCP_SYNACK_COOKIE = 2, /* Kernel is in syncookie mode
6660 * when sending a SYN.
6664 struct bpf_perf_event_value {
6671 BPF_DEVCG_ACC_MKNOD = (1ULL << 0),
6672 BPF_DEVCG_ACC_READ = (1ULL << 1),
6673 BPF_DEVCG_ACC_WRITE = (1ULL << 2),
6677 BPF_DEVCG_DEV_BLOCK = (1ULL << 0),
6678 BPF_DEVCG_DEV_CHAR = (1ULL << 1),
6681 struct bpf_cgroup_dev_ctx {
6682 /* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */
6688 struct bpf_raw_tracepoint_args {
6692 /* DIRECT: Skip the FIB rules and go to FIB table associated with device
6693 * OUTPUT: Do lookup from egress perspective; default is ingress
6696 BPF_FIB_LOOKUP_DIRECT = (1U << 0),
6697 BPF_FIB_LOOKUP_OUTPUT = (1U << 1),
6698 BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2),
6699 BPF_FIB_LOOKUP_TBID = (1U << 3),
6700 BPF_FIB_LOOKUP_SRC = (1U << 4),
6704 BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */
6705 BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */
6706 BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */
6707 BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */
6708 BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */
6709 BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */
6710 BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */
6711 BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */
6712 BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */
6713 BPF_FIB_LKUP_RET_NO_SRC_ADDR, /* failed to derive IP src addr */
6716 struct bpf_fib_lookup {
6717 /* input: network family for lookup (AF_INET, AF_INET6)
6718 * output: network family of egress nexthop
6722 /* set if lookup is to consider L4 data - e.g., FIB rules */
6727 union { /* used for MTU check */
6728 /* input to lookup */
6729 __u16 tot_len; /* L3 length from network hdr (iph->tot_len) */
6731 /* output: MTU value */
6734 /* input: L3 device index for lookup
6735 * output: device index from FIB lookup
6740 /* inputs to lookup */
6741 __u8 tos; /* AF_INET */
6742 __be32 flowinfo; /* AF_INET6, flow_label + priority */
6744 /* output: metric of fib result (IPv4/IPv6 only) */
6748 /* input: source address to consider for lookup
6749 * output: source address result from lookup
6753 __u32 ipv6_src[4]; /* in6_addr; network order */
6756 /* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in
6757 * network header. output: bpf_fib_lookup sets to gateway address
6758 * if FIB lookup returns gateway route
6762 __u32 ipv6_dst[4]; /* in6_addr; network order */
6768 __be16 h_vlan_proto;
6771 /* input: when accompanied with the
6772 * 'BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_TBID` flags, a
6773 * specific routing table to use for the fib lookup.
6778 __u8 smac[6]; /* ETH_ALEN */
6779 __u8 dmac[6]; /* ETH_ALEN */
6782 struct bpf_redir_neigh {
6783 /* network family for lookup (AF_INET, AF_INET6) */
6785 /* network address of nexthop; skips fib lookup to find gateway */
6788 __u32 ipv6_nh[4]; /* in6_addr; network order */
6792 /* bpf_check_mtu flags*/
6793 enum bpf_check_mtu_flags {
6794 BPF_MTU_CHK_SEGS = (1U << 0),
6797 enum bpf_check_mtu_ret {
6798 BPF_MTU_CHK_RET_SUCCESS, /* check and lookup successful */
6799 BPF_MTU_CHK_RET_FRAG_NEEDED, /* fragmentation required to fwd */
6800 BPF_MTU_CHK_RET_SEGS_TOOBIG, /* GSO re-segmentation needed to fwd */
6803 enum bpf_task_fd_type {
6804 BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */
6805 BPF_FD_TYPE_TRACEPOINT, /* tp name */
6806 BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */
6807 BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */
6808 BPF_FD_TYPE_UPROBE, /* filename + offset */
6809 BPF_FD_TYPE_URETPROBE, /* filename + offset */
6813 BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG = (1U << 0),
6814 BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL = (1U << 1),
6815 BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP = (1U << 2),
6818 struct bpf_flow_keys {
6821 __u16 addr_proto; /* ETH_P_* of valid addrs */
6835 __u32 ipv6_src[4]; /* in6_addr; network order */
6836 __u32 ipv6_dst[4]; /* in6_addr; network order */
6843 struct bpf_func_info {
6848 #define BPF_LINE_INFO_LINE_NUM(line_col) ((line_col) >> 10)
6849 #define BPF_LINE_INFO_LINE_COL(line_col) ((line_col) & 0x3ff)
6851 struct bpf_line_info {
6853 __u32 file_name_off;
6858 struct bpf_spin_lock {
6865 } __attribute__((aligned(8)));
6870 } __attribute__((aligned(8)));
6873 __u32 write; /* Sysctl is being read (= 0) or written (= 1).
6874 * Allows 1,2,4-byte read, but no write.
6876 __u32 file_pos; /* Sysctl file position to read from, write to.
6877 * Allows 1,2,4-byte read an 4-byte write.
6881 struct bpf_sockopt {
6882 __bpf_md_ptr(struct bpf_sock *, sk);
6883 __bpf_md_ptr(void *, optval);
6884 __bpf_md_ptr(void *, optval_end);
6892 struct bpf_pidns_info {
6897 /* User accessible data for SK_LOOKUP programs. Add new fields at the end. */
6898 struct bpf_sk_lookup {
6900 __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */
6901 __u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */
6904 __u32 family; /* Protocol family (AF_INET, AF_INET6) */
6905 __u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */
6906 __u32 remote_ip4; /* Network byte order */
6907 __u32 remote_ip6[4]; /* Network byte order */
6908 __be16 remote_port; /* Network byte order */
6909 __u16 :16; /* Zero padding */
6910 __u32 local_ip4; /* Network byte order */
6911 __u32 local_ip6[4]; /* Network byte order */
6912 __u32 local_port; /* Host byte order */
6913 __u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */
6917 * struct btf_ptr is used for typed pointer representation; the
6918 * type id is used to render the pointer data as the appropriate type
6919 * via the bpf_snprintf_btf() helper described above. A flags field -
6920 * potentially to specify additional details about the BTF pointer
6921 * (rather than its mode of display) - is included for future use.
6922 * Display flags - BTF_F_* - are passed to bpf_snprintf_btf separately.
6927 __u32 flags; /* BTF ptr flags; unused at present. */
6931 * Flags to control bpf_snprintf_btf() behaviour.
6932 * - BTF_F_COMPACT: no formatting around type information
6933 * - BTF_F_NONAME: no struct/union member names/types
6934 * - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values;
6935 * equivalent to %px.
6936 * - BTF_F_ZERO: show zero-valued struct/union members; they
6937 * are not displayed by default
6940 BTF_F_COMPACT = (1ULL << 0),
6941 BTF_F_NONAME = (1ULL << 1),
6942 BTF_F_PTR_RAW = (1ULL << 2),
6943 BTF_F_ZERO = (1ULL << 3),
6946 /* bpf_core_relo_kind encodes which aspect of captured field/type/enum value
6947 * has to be adjusted by relocations. It is emitted by llvm and passed to
6948 * libbpf and later to the kernel.
6950 enum bpf_core_relo_kind {
6951 BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */
6952 BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */
6953 BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */
6954 BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */
6955 BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */
6956 BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */
6957 BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */
6958 BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */
6959 BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */
6960 BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */
6961 BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */
6962 BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */
6963 BPF_CORE_TYPE_MATCHES = 12, /* type match in target kernel */
6967 * "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf
6968 * and from libbpf to the kernel.
6970 * CO-RE relocation captures the following data:
6971 * - insn_off - instruction offset (in bytes) within a BPF program that needs
6972 * its insn->imm field to be relocated with actual field info;
6973 * - type_id - BTF type ID of the "root" (containing) entity of a relocatable
6975 * - access_str_off - offset into corresponding .BTF string section. String
6976 * interpretation depends on specific relocation kind:
6977 * - for field-based relocations, string encodes an accessed field using
6978 * a sequence of field and array indices, separated by colon (:). It's
6979 * conceptually very close to LLVM's getelementptr ([0]) instruction's
6980 * arguments for identifying offset to a field.
6981 * - for type-based relocations, strings is expected to be just "0";
6982 * - for enum value-based relocations, string contains an index of enum
6983 * value within its enum type;
6984 * - kind - one of enum bpf_core_relo_kind;
6994 * struct sample *s = ...;
6995 * int *x = &s->a; // encoded as "0:0" (a is field #0)
6996 * int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1,
6997 * // b is field #0 inside anon struct, accessing elem #5)
6998 * int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array)
7000 * type_id for all relocs in this example will capture BTF type id of
7003 * Such relocation is emitted when using __builtin_preserve_access_index()
7004 * Clang built-in, passing expression that captures field address, e.g.:
7006 * bpf_probe_read(&dst, sizeof(dst),
7007 * __builtin_preserve_access_index(&src->a.b.c));
7009 * In this case Clang will emit field relocation recording necessary data to
7010 * be able to find offset of embedded `a.b.c` field within `src` struct.
7012 * [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction
7014 struct bpf_core_relo {
7017 __u32 access_str_off;
7018 enum bpf_core_relo_kind kind;
7021 #endif /* _UAPI__LINUX_BPF_H__ */