GNU Linux-libre 6.6.34-gnu
[releases.git] / include / scsi / scsi_device.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _SCSI_SCSI_DEVICE_H
3 #define _SCSI_SCSI_DEVICE_H
4
5 #include <linux/list.h>
6 #include <linux/spinlock.h>
7 #include <linux/workqueue.h>
8 #include <linux/blk-mq.h>
9 #include <scsi/scsi.h>
10 #include <linux/atomic.h>
11 #include <linux/sbitmap.h>
12
13 struct bsg_device;
14 struct device;
15 struct request_queue;
16 struct scsi_cmnd;
17 struct scsi_lun;
18 struct scsi_sense_hdr;
19
20 typedef __u64 __bitwise blist_flags_t;
21
22 #define SCSI_SENSE_BUFFERSIZE   96
23
24 struct scsi_mode_data {
25         __u32   length;
26         __u16   block_descriptor_length;
27         __u8    medium_type;
28         __u8    device_specific;
29         __u8    header_length;
30         __u8    longlba:1;
31 };
32
33 /*
34  * sdev state: If you alter this, you also need to alter scsi_sysfs.c
35  * (for the ascii descriptions) and the state model enforcer:
36  * scsi_lib:scsi_device_set_state().
37  */
38 enum scsi_device_state {
39         SDEV_CREATED = 1,       /* device created but not added to sysfs
40                                  * Only internal commands allowed (for inq) */
41         SDEV_RUNNING,           /* device properly configured
42                                  * All commands allowed */
43         SDEV_CANCEL,            /* beginning to delete device
44                                  * Only error handler commands allowed */
45         SDEV_DEL,               /* device deleted 
46                                  * no commands allowed */
47         SDEV_QUIESCE,           /* Device quiescent.  No block commands
48                                  * will be accepted, only specials (which
49                                  * originate in the mid-layer) */
50         SDEV_OFFLINE,           /* Device offlined (by error handling or
51                                  * user request */
52         SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */
53         SDEV_BLOCK,             /* Device blocked by scsi lld.  No
54                                  * scsi commands from user or midlayer
55                                  * should be issued to the scsi
56                                  * lld. */
57         SDEV_CREATED_BLOCK,     /* same as above but for created devices */
58 };
59
60 enum scsi_scan_mode {
61         SCSI_SCAN_INITIAL = 0,
62         SCSI_SCAN_RESCAN,
63         SCSI_SCAN_MANUAL,
64 };
65
66 enum scsi_device_event {
67         SDEV_EVT_MEDIA_CHANGE   = 1,    /* media has changed */
68         SDEV_EVT_INQUIRY_CHANGE_REPORTED,               /* 3F 03  UA reported */
69         SDEV_EVT_CAPACITY_CHANGE_REPORTED,              /* 2A 09  UA reported */
70         SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED,       /* 38 07  UA reported */
71         SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED,        /* 2A 01  UA reported */
72         SDEV_EVT_LUN_CHANGE_REPORTED,                   /* 3F 0E  UA reported */
73         SDEV_EVT_ALUA_STATE_CHANGE_REPORTED,            /* 2A 06  UA reported */
74         SDEV_EVT_POWER_ON_RESET_OCCURRED,               /* 29 00  UA reported */
75
76         SDEV_EVT_FIRST          = SDEV_EVT_MEDIA_CHANGE,
77         SDEV_EVT_LAST           = SDEV_EVT_POWER_ON_RESET_OCCURRED,
78
79         SDEV_EVT_MAXBITS        = SDEV_EVT_LAST + 1
80 };
81
82 struct scsi_event {
83         enum scsi_device_event  evt_type;
84         struct list_head        node;
85
86         /* put union of data structures, for non-simple event types,
87          * here
88          */
89 };
90
91 /**
92  * struct scsi_vpd - SCSI Vital Product Data
93  * @rcu: For kfree_rcu().
94  * @len: Length in bytes of @data.
95  * @data: VPD data as defined in various T10 SCSI standard documents.
96  */
97 struct scsi_vpd {
98         struct rcu_head rcu;
99         int             len;
100         unsigned char   data[];
101 };
102
103 struct scsi_device {
104         struct Scsi_Host *host;
105         struct request_queue *request_queue;
106
107         /* the next two are protected by the host->host_lock */
108         struct list_head    siblings;   /* list of all devices on this host */
109         struct list_head    same_target_siblings; /* just the devices sharing same target id */
110
111         struct sbitmap budget_map;
112         atomic_t device_blocked;        /* Device returned QUEUE_FULL. */
113
114         atomic_t restarts;
115         spinlock_t list_lock;
116         struct list_head starved_entry;
117         unsigned short queue_depth;     /* How deep of a queue we want */
118         unsigned short max_queue_depth; /* max queue depth */
119         unsigned short last_queue_full_depth; /* These two are used by */
120         unsigned short last_queue_full_count; /* scsi_track_queue_full() */
121         unsigned long last_queue_full_time;     /* last queue full time */
122         unsigned long queue_ramp_up_period;     /* ramp up period in jiffies */
123 #define SCSI_DEFAULT_RAMP_UP_PERIOD     (120 * HZ)
124
125         unsigned long last_queue_ramp_up;       /* last queue ramp up time */
126
127         unsigned int id, channel;
128         u64 lun;
129         unsigned int manufacturer;      /* Manufacturer of device, for using 
130                                          * vendor-specific cmd's */
131         unsigned sector_size;   /* size in bytes */
132
133         void *hostdata;         /* available to low-level driver */
134         unsigned char type;
135         char scsi_level;
136         char inq_periph_qual;   /* PQ from INQUIRY data */      
137         struct mutex inquiry_mutex;
138         unsigned char inquiry_len;      /* valid bytes in 'inquiry' */
139         unsigned char * inquiry;        /* INQUIRY response data */
140         const char * vendor;            /* [back_compat] point into 'inquiry' ... */
141         const char * model;             /* ... after scan; point to static string */
142         const char * rev;               /* ... "nullnullnullnull" before scan */
143
144 #define SCSI_DEFAULT_VPD_LEN    255     /* default SCSI VPD page size (max) */
145         struct scsi_vpd __rcu *vpd_pg0;
146         struct scsi_vpd __rcu *vpd_pg83;
147         struct scsi_vpd __rcu *vpd_pg80;
148         struct scsi_vpd __rcu *vpd_pg89;
149         struct scsi_vpd __rcu *vpd_pgb0;
150         struct scsi_vpd __rcu *vpd_pgb1;
151         struct scsi_vpd __rcu *vpd_pgb2;
152
153         struct scsi_target      *sdev_target;
154
155         blist_flags_t           sdev_bflags; /* black/white flags as also found in
156                                  * scsi_devinfo.[hc]. For now used only to
157                                  * pass settings from slave_alloc to scsi
158                                  * core. */
159         unsigned int eh_timeout; /* Error handling timeout */
160
161         /*
162          * If true, let the high-level device driver (sd) manage the device
163          * power state for system suspend/resume (suspend to RAM and
164          * hibernation) operations.
165          */
166         unsigned manage_system_start_stop:1;
167
168         /*
169          * If true, let the high-level device driver (sd) manage the device
170          * power state for runtime device suspand and resume operations.
171          */
172         unsigned manage_runtime_start_stop:1;
173
174         /*
175          * If true, let the high-level device driver (sd) manage the device
176          * power state for system shutdown (power off) operations.
177          */
178         unsigned manage_shutdown:1;
179
180         /*
181          * If set and if the device is runtime suspended, ask the high-level
182          * device driver (sd) to force a runtime resume of the device.
183          */
184         unsigned force_runtime_start_on_system_start:1;
185
186         unsigned removable:1;
187         unsigned changed:1;     /* Data invalid due to media change */
188         unsigned busy:1;        /* Used to prevent races */
189         unsigned lockable:1;    /* Able to prevent media removal */
190         unsigned locked:1;      /* Media removal disabled */
191         unsigned borken:1;      /* Tell the Seagate driver to be 
192                                  * painfully slow on this device */
193         unsigned disconnect:1;  /* can disconnect */
194         unsigned soft_reset:1;  /* Uses soft reset option */
195         unsigned sdtr:1;        /* Device supports SDTR messages */
196         unsigned wdtr:1;        /* Device supports WDTR messages */
197         unsigned ppr:1;         /* Device supports PPR messages */
198         unsigned tagged_supported:1;    /* Supports SCSI-II tagged queuing */
199         unsigned simple_tags:1; /* simple queue tag messages are enabled */
200         unsigned was_reset:1;   /* There was a bus reset on the bus for 
201                                  * this device */
202         unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
203                                      * because we did a bus reset. */
204         unsigned use_10_for_rw:1; /* first try 10-byte read / write */
205         unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
206         unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */
207         unsigned read_before_ms:1;      /* perform a READ before MODE SENSE */
208         unsigned no_report_opcodes:1;   /* no REPORT SUPPORTED OPERATION CODES */
209         unsigned no_write_same:1;       /* no WRITE SAME command */
210         unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
211         unsigned use_16_for_sync:1;     /* Use sync (16) over sync (10) */
212         unsigned skip_ms_page_8:1;      /* do not use MODE SENSE page 0x08 */
213         unsigned skip_ms_page_3f:1;     /* do not use MODE SENSE page 0x3f */
214         unsigned skip_vpd_pages:1;      /* do not read VPD pages */
215         unsigned try_vpd_pages:1;       /* attempt to read VPD pages */
216         unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
217         unsigned no_start_on_add:1;     /* do not issue start on add */
218         unsigned allow_restart:1; /* issue START_UNIT in error handler */
219         unsigned no_start_on_resume:1; /* Do not issue START_STOP_UNIT on resume */
220         unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
221         unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
222         unsigned select_no_atn:1;
223         unsigned fix_capacity:1;        /* READ_CAPACITY is too high by 1 */
224         unsigned guess_capacity:1;      /* READ_CAPACITY might be too high by 1 */
225         unsigned retry_hwerror:1;       /* Retry HARDWARE_ERROR */
226         unsigned last_sector_bug:1;     /* do not use multisector accesses on
227                                            SD_LAST_BUGGY_SECTORS */
228         unsigned no_read_disc_info:1;   /* Avoid READ_DISC_INFO cmds */
229         unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
230         unsigned try_rc_10_first:1;     /* Try READ_CAPACACITY_10 first */
231         unsigned security_supported:1;  /* Supports Security Protocols */
232         unsigned is_visible:1;  /* is the device visible in sysfs */
233         unsigned wce_default_on:1;      /* Cache is ON by default */
234         unsigned no_dif:1;      /* T10 PI (DIF) should be disabled */
235         unsigned broken_fua:1;          /* Don't set FUA bit */
236         unsigned lun_in_cdb:1;          /* Store LUN bits in CDB[1] */
237         unsigned unmap_limit_for_ws:1;  /* Use the UNMAP limit for WRITE SAME */
238         unsigned rpm_autosuspend:1;     /* Enable runtime autosuspend at device
239                                          * creation time */
240         unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */
241         unsigned silence_suspend:1;     /* Do not print runtime PM related messages */
242         unsigned no_vpd_size:1;         /* No VPD size reported in header */
243
244         unsigned cdl_supported:1;       /* Command duration limits supported */
245         unsigned cdl_enable:1;          /* Enable/disable Command duration limits */
246
247         unsigned int queue_stopped;     /* request queue is quiesced */
248         bool offline_already;           /* Device offline message logged */
249
250         atomic_t disk_events_disable_depth; /* disable depth for disk events */
251
252         DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
253         DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
254         struct list_head event_list;    /* asserted events */
255         struct work_struct event_work;
256
257         unsigned int max_device_blocked; /* what device_blocked counts down from  */
258 #define SCSI_DEFAULT_DEVICE_BLOCKED     3
259
260         atomic_t iorequest_cnt;
261         atomic_t iodone_cnt;
262         atomic_t ioerr_cnt;
263         atomic_t iotmo_cnt;
264
265         struct device           sdev_gendev,
266                                 sdev_dev;
267
268         struct work_struct      requeue_work;
269
270         struct scsi_device_handler *handler;
271         void                    *handler_data;
272
273         size_t                  dma_drain_len;
274         void                    *dma_drain_buf;
275
276         unsigned int            sg_timeout;
277         unsigned int            sg_reserved_size;
278
279         struct bsg_device       *bsg_dev;
280         unsigned char           access_state;
281         struct mutex            state_mutex;
282         enum scsi_device_state sdev_state;
283         struct task_struct      *quiesced_by;
284         unsigned long           sdev_data[];
285 } __attribute__((aligned(sizeof(unsigned long))));
286
287 #define to_scsi_device(d)       \
288         container_of(d, struct scsi_device, sdev_gendev)
289 #define class_to_sdev(d)        \
290         container_of(d, struct scsi_device, sdev_dev)
291 #define transport_class_to_sdev(class_dev) \
292         to_scsi_device(class_dev->parent)
293
294 #define sdev_dbg(sdev, fmt, a...) \
295         dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
296
297 /*
298  * like scmd_printk, but the device name is passed in
299  * as a string pointer
300  */
301 __printf(4, 5) void
302 sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
303                 const char *, ...);
304
305 #define sdev_printk(l, sdev, fmt, a...)                         \
306         sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
307
308 __printf(3, 4) void
309 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
310
311 #define scmd_dbg(scmd, fmt, a...)                                       \
312         do {                                                            \
313                 struct request *__rq = scsi_cmd_to_rq((scmd));          \
314                                                                         \
315                 if (__rq->q->disk)                                      \
316                         sdev_dbg((scmd)->device, "[%s] " fmt,           \
317                                  __rq->q->disk->disk_name, ##a);        \
318                 else                                                    \
319                         sdev_dbg((scmd)->device, fmt, ##a);             \
320         } while (0)
321
322 enum scsi_target_state {
323         STARGET_CREATED = 1,
324         STARGET_RUNNING,
325         STARGET_REMOVE,
326         STARGET_CREATED_REMOVE,
327         STARGET_DEL,
328 };
329
330 /*
331  * scsi_target: representation of a scsi target, for now, this is only
332  * used for single_lun devices. If no one has active IO to the target,
333  * starget_sdev_user is NULL, else it points to the active sdev.
334  */
335 struct scsi_target {
336         struct scsi_device      *starget_sdev_user;
337         struct list_head        siblings;
338         struct list_head        devices;
339         struct device           dev;
340         struct kref             reap_ref; /* last put renders target invisible */
341         unsigned int            channel;
342         unsigned int            id; /* target id ... replace
343                                      * scsi_device.id eventually */
344         unsigned int            create:1; /* signal that it needs to be added */
345         unsigned int            single_lun:1;   /* Indicates we should only
346                                                  * allow I/O to one of the luns
347                                                  * for the device at a time. */
348         unsigned int            pdt_1f_for_no_lun:1;    /* PDT = 0x1f
349                                                  * means no lun present. */
350         unsigned int            no_report_luns:1;       /* Don't use
351                                                  * REPORT LUNS for scanning. */
352         unsigned int            expecting_lun_change:1; /* A device has reported
353                                                  * a 3F/0E UA, other devices on
354                                                  * the same target will also. */
355         /* commands actually active on LLD. */
356         atomic_t                target_busy;
357         atomic_t                target_blocked;
358
359         /*
360          * LLDs should set this in the slave_alloc host template callout.
361          * If set to zero then there is not limit.
362          */
363         unsigned int            can_queue;
364         unsigned int            max_target_blocked;
365 #define SCSI_DEFAULT_TARGET_BLOCKED     3
366
367         char                    scsi_level;
368         enum scsi_target_state  state;
369         void                    *hostdata; /* available to low-level driver */
370         unsigned long           starget_data[]; /* for the transport */
371         /* starget_data must be the last element!!!! */
372 } __attribute__((aligned(sizeof(unsigned long))));
373
374 #define to_scsi_target(d)       container_of(d, struct scsi_target, dev)
375 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
376 {
377         return to_scsi_target(sdev->sdev_gendev.parent);
378 }
379 #define transport_class_to_starget(class_dev) \
380         to_scsi_target(class_dev->parent)
381
382 #define starget_printk(prefix, starget, fmt, a...)      \
383         dev_printk(prefix, &(starget)->dev, fmt, ##a)
384
385 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
386                 uint, uint, u64, void *hostdata);
387 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
388                            uint target, u64 lun);
389 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
390 extern void scsi_remove_device(struct scsi_device *);
391 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
392 void scsi_attach_vpd(struct scsi_device *sdev);
393 void scsi_cdl_check(struct scsi_device *sdev);
394 int scsi_cdl_enable(struct scsi_device *sdev, bool enable);
395
396 extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);
397 extern int __must_check scsi_device_get(struct scsi_device *);
398 extern void scsi_device_put(struct scsi_device *);
399 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
400                                               uint, uint, u64);
401 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
402                                                 uint, uint, u64);
403 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
404                                                         u64);
405 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
406                                                           u64);
407 extern void starget_for_each_device(struct scsi_target *, void *,
408                      void (*fn)(struct scsi_device *, void *));
409 extern void __starget_for_each_device(struct scsi_target *, void *,
410                                       void (*fn)(struct scsi_device *,
411                                                  void *));
412
413 /* only exposed to implement shost_for_each_device */
414 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
415                                                   struct scsi_device *);
416
417 /**
418  * shost_for_each_device - iterate over all devices of a host
419  * @sdev: the &struct scsi_device to use as a cursor
420  * @shost: the &struct scsi_host to iterate over
421  *
422  * Iterator that returns each device attached to @shost.  This loop
423  * takes a reference on each device and releases it at the end.  If
424  * you break out of the loop, you must call scsi_device_put(sdev).
425  */
426 #define shost_for_each_device(sdev, shost) \
427         for ((sdev) = __scsi_iterate_devices((shost), NULL); \
428              (sdev); \
429              (sdev) = __scsi_iterate_devices((shost), (sdev)))
430
431 /**
432  * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
433  * @sdev: the &struct scsi_device to use as a cursor
434  * @shost: the &struct scsi_host to iterate over
435  *
436  * Iterator that returns each device attached to @shost.  It does _not_
437  * take a reference on the scsi_device, so the whole loop must be
438  * protected by shost->host_lock.
439  *
440  * Note: The only reason to use this is because you need to access the
441  * device list in interrupt context.  Otherwise you really want to use
442  * shost_for_each_device instead.
443  */
444 #define __shost_for_each_device(sdev, shost) \
445         list_for_each_entry((sdev), &((shost)->__devices), siblings)
446
447 extern int scsi_change_queue_depth(struct scsi_device *, int);
448 extern int scsi_track_queue_full(struct scsi_device *, int);
449
450 extern int scsi_set_medium_removal(struct scsi_device *, char);
451
452 int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
453                     int subpage, unsigned char *buffer, int len, int timeout,
454                     int retries, struct scsi_mode_data *data,
455                     struct scsi_sense_hdr *);
456 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
457                             unsigned char *buffer, int len, int timeout,
458                             int retries, struct scsi_mode_data *data,
459                             struct scsi_sense_hdr *);
460 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
461                                 int retries, struct scsi_sense_hdr *sshdr);
462 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
463                              int buf_len);
464 int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
465                        unsigned int len, unsigned char opcode,
466                        unsigned short sa);
467 extern int scsi_device_set_state(struct scsi_device *sdev,
468                                  enum scsi_device_state state);
469 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
470                                           gfp_t gfpflags);
471 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
472 extern void sdev_evt_send_simple(struct scsi_device *sdev,
473                           enum scsi_device_event evt_type, gfp_t gfpflags);
474 extern int scsi_device_quiesce(struct scsi_device *sdev);
475 extern void scsi_device_resume(struct scsi_device *sdev);
476 extern void scsi_target_quiesce(struct scsi_target *);
477 extern void scsi_target_resume(struct scsi_target *);
478 extern void scsi_scan_target(struct device *parent, unsigned int channel,
479                              unsigned int id, u64 lun,
480                              enum scsi_scan_mode rescan);
481 extern void scsi_target_reap(struct scsi_target *);
482 void scsi_block_targets(struct Scsi_Host *shost, struct device *dev);
483 extern void scsi_target_unblock(struct device *, enum scsi_device_state);
484 extern void scsi_remove_target(struct device *);
485 extern const char *scsi_device_state_name(enum scsi_device_state);
486 extern int scsi_is_sdev_device(const struct device *);
487 extern int scsi_is_target_device(const struct device *);
488 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
489
490 /* Optional arguments to scsi_execute_cmd */
491 struct scsi_exec_args {
492         unsigned char *sense;           /* sense buffer */
493         unsigned int sense_len;         /* sense buffer len */
494         struct scsi_sense_hdr *sshdr;   /* decoded sense header */
495         blk_mq_req_flags_t req_flags;   /* BLK_MQ_REQ flags */
496         int scmd_flags;                 /* SCMD flags */
497         int *resid;                     /* residual length */
498 };
499
500 int scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd,
501                      blk_opf_t opf, void *buffer, unsigned int bufflen,
502                      int timeout, int retries,
503                      const struct scsi_exec_args *args);
504
505 extern void sdev_disable_disk_events(struct scsi_device *sdev);
506 extern void sdev_enable_disk_events(struct scsi_device *sdev);
507 extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
508 extern int scsi_vpd_tpg_id(struct scsi_device *, int *);
509
510 #ifdef CONFIG_PM
511 extern int scsi_autopm_get_device(struct scsi_device *);
512 extern void scsi_autopm_put_device(struct scsi_device *);
513 #else
514 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
515 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
516 #endif /* CONFIG_PM */
517
518 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
519 {
520         return device_reprobe(&sdev->sdev_gendev);
521 }
522
523 static inline unsigned int sdev_channel(struct scsi_device *sdev)
524 {
525         return sdev->channel;
526 }
527
528 static inline unsigned int sdev_id(struct scsi_device *sdev)
529 {
530         return sdev->id;
531 }
532
533 #define scmd_id(scmd) sdev_id((scmd)->device)
534 #define scmd_channel(scmd) sdev_channel((scmd)->device)
535
536 /*
537  * checks for positions of the SCSI state machine
538  */
539 static inline int scsi_device_online(struct scsi_device *sdev)
540 {
541         return (sdev->sdev_state != SDEV_OFFLINE &&
542                 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
543                 sdev->sdev_state != SDEV_DEL);
544 }
545 static inline int scsi_device_blocked(struct scsi_device *sdev)
546 {
547         return sdev->sdev_state == SDEV_BLOCK ||
548                 sdev->sdev_state == SDEV_CREATED_BLOCK;
549 }
550 static inline int scsi_device_created(struct scsi_device *sdev)
551 {
552         return sdev->sdev_state == SDEV_CREATED ||
553                 sdev->sdev_state == SDEV_CREATED_BLOCK;
554 }
555
556 int scsi_internal_device_block_nowait(struct scsi_device *sdev);
557 int scsi_internal_device_unblock_nowait(struct scsi_device *sdev,
558                                         enum scsi_device_state new_state);
559
560 /* accessor functions for the SCSI parameters */
561 static inline int scsi_device_sync(struct scsi_device *sdev)
562 {
563         return sdev->sdtr;
564 }
565 static inline int scsi_device_wide(struct scsi_device *sdev)
566 {
567         return sdev->wdtr;
568 }
569 static inline int scsi_device_dt(struct scsi_device *sdev)
570 {
571         return sdev->ppr;
572 }
573 static inline int scsi_device_dt_only(struct scsi_device *sdev)
574 {
575         if (sdev->inquiry_len < 57)
576                 return 0;
577         return (sdev->inquiry[56] & 0x0c) == 0x04;
578 }
579 static inline int scsi_device_ius(struct scsi_device *sdev)
580 {
581         if (sdev->inquiry_len < 57)
582                 return 0;
583         return sdev->inquiry[56] & 0x01;
584 }
585 static inline int scsi_device_qas(struct scsi_device *sdev)
586 {
587         if (sdev->inquiry_len < 57)
588                 return 0;
589         return sdev->inquiry[56] & 0x02;
590 }
591 static inline int scsi_device_enclosure(struct scsi_device *sdev)
592 {
593         return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
594 }
595
596 static inline int scsi_device_protection(struct scsi_device *sdev)
597 {
598         if (sdev->no_dif)
599                 return 0;
600
601         return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
602 }
603
604 static inline int scsi_device_tpgs(struct scsi_device *sdev)
605 {
606         return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
607 }
608
609 /**
610  * scsi_device_supports_vpd - test if a device supports VPD pages
611  * @sdev: the &struct scsi_device to test
612  *
613  * If the 'try_vpd_pages' flag is set it takes precedence.
614  * Otherwise we will assume VPD pages are supported if the
615  * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
616  */
617 static inline int scsi_device_supports_vpd(struct scsi_device *sdev)
618 {
619         /* Attempt VPD inquiry if the device blacklist explicitly calls
620          * for it.
621          */
622         if (sdev->try_vpd_pages)
623                 return 1;
624         /*
625          * Although VPD inquiries can go to SCSI-2 type devices,
626          * some USB ones crash on receiving them, and the pages
627          * we currently ask for are mandatory for SPC-2 and beyond
628          */
629         if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages)
630                 return 1;
631         return 0;
632 }
633
634 static inline int scsi_device_busy(struct scsi_device *sdev)
635 {
636         return sbitmap_weight(&sdev->budget_map);
637 }
638
639 #define MODULE_ALIAS_SCSI_DEVICE(type) \
640         MODULE_ALIAS("scsi:t-" __stringify(type) "*")
641 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
642
643 #endif /* _SCSI_SCSI_DEVICE_H */