GNU Linux-libre 6.7.9-gnu
[releases.git] / include / net / bond_options.h
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * drivers/net/bond/bond_options.h - bonding options
4  * Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
5  */
6
7 #ifndef _NET_BOND_OPTIONS_H
8 #define _NET_BOND_OPTIONS_H
9
10 #include <linux/bits.h>
11 #include <linux/limits.h>
12 #include <linux/types.h>
13 #include <linux/string.h>
14
15 struct netlink_ext_ack;
16 struct nlattr;
17
18 #define BOND_OPT_MAX_NAMELEN 32
19 #define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
20 #define BOND_MODE_ALL_EX(x) (~(x))
21
22 /* Option flags:
23  * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
24  * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
25  * BOND_OPTFLAG_RAWVAL - the option parses the value itself
26  */
27 enum {
28         BOND_OPTFLAG_NOSLAVES   = BIT(0),
29         BOND_OPTFLAG_IFDOWN     = BIT(1),
30         BOND_OPTFLAG_RAWVAL     = BIT(2)
31 };
32
33 /* Value type flags:
34  * BOND_VALFLAG_DEFAULT - mark the value as default
35  * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
36  */
37 enum {
38         BOND_VALFLAG_DEFAULT    = BIT(0),
39         BOND_VALFLAG_MIN        = BIT(1),
40         BOND_VALFLAG_MAX        = BIT(2)
41 };
42
43 /* Option IDs, their bit positions correspond to their IDs */
44 enum {
45         BOND_OPT_MODE,
46         BOND_OPT_PACKETS_PER_SLAVE,
47         BOND_OPT_XMIT_HASH,
48         BOND_OPT_ARP_VALIDATE,
49         BOND_OPT_ARP_ALL_TARGETS,
50         BOND_OPT_FAIL_OVER_MAC,
51         BOND_OPT_ARP_INTERVAL,
52         BOND_OPT_ARP_TARGETS,
53         BOND_OPT_DOWNDELAY,
54         BOND_OPT_UPDELAY,
55         BOND_OPT_LACP_RATE,
56         BOND_OPT_MINLINKS,
57         BOND_OPT_AD_SELECT,
58         BOND_OPT_NUM_PEER_NOTIF,
59         BOND_OPT_MIIMON,
60         BOND_OPT_PRIMARY,
61         BOND_OPT_PRIMARY_RESELECT,
62         BOND_OPT_USE_CARRIER,
63         BOND_OPT_ACTIVE_SLAVE,
64         BOND_OPT_QUEUE_ID,
65         BOND_OPT_ALL_SLAVES_ACTIVE,
66         BOND_OPT_RESEND_IGMP,
67         BOND_OPT_LP_INTERVAL,
68         BOND_OPT_SLAVES,
69         BOND_OPT_TLB_DYNAMIC_LB,
70         BOND_OPT_AD_ACTOR_SYS_PRIO,
71         BOND_OPT_AD_ACTOR_SYSTEM,
72         BOND_OPT_AD_USER_PORT_KEY,
73         BOND_OPT_NUM_PEER_NOTIF_ALIAS,
74         BOND_OPT_PEER_NOTIF_DELAY,
75         BOND_OPT_LACP_ACTIVE,
76         BOND_OPT_MISSED_MAX,
77         BOND_OPT_NS_TARGETS,
78         BOND_OPT_PRIO,
79         BOND_OPT_LAST
80 };
81
82 /* This structure is used for storing option values and for passing option
83  * values when changing an option. The logic when used as an arg is as follows:
84  * - if value != ULLONG_MAX -> parse value
85  * - if string != NULL -> parse string
86  * - if the opt is RAW data and length less than maxlen,
87  *   copy the data to extra storage
88  */
89
90 #define BOND_OPT_EXTRA_MAXLEN 16
91 struct bond_opt_value {
92         char *string;
93         u64 value;
94         u32 flags;
95         union {
96                 char extra[BOND_OPT_EXTRA_MAXLEN];
97                 struct net_device *slave_dev;
98         };
99 };
100
101 struct bonding;
102
103 struct bond_option {
104         int id;
105         const char *name;
106         const char *desc;
107         u32 flags;
108
109         /* unsuppmodes is used to denote modes in which the option isn't
110          * supported.
111          */
112         unsigned long unsuppmodes;
113         /* supported values which this option can have, can be a subset of
114          * BOND_OPTVAL_RANGE's value range
115          */
116         const struct bond_opt_value *values;
117
118         int (*set)(struct bonding *bond, const struct bond_opt_value *val);
119 };
120
121 int __bond_opt_set(struct bonding *bond, unsigned int option,
122                    struct bond_opt_value *val,
123                    struct nlattr *bad_attr, struct netlink_ext_ack *extack);
124 int __bond_opt_set_notify(struct bonding *bond, unsigned int option,
125                           struct bond_opt_value *val);
126 int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
127
128 const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
129                                             struct bond_opt_value *val);
130 const struct bond_option *bond_opt_get(unsigned int option);
131 const struct bond_option *bond_opt_get_by_name(const char *name);
132 const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
133
134 /* This helper is used to initialize a bond_opt_value structure for parameter
135  * passing. There should be either a valid string or value, but not both.
136  * When value is ULLONG_MAX then string will be used.
137  */
138 static inline void __bond_opt_init(struct bond_opt_value *optval,
139                                    char *string, u64 value,
140                                    void *extra, size_t extra_len)
141 {
142         memset(optval, 0, sizeof(*optval));
143         optval->value = ULLONG_MAX;
144         if (value != ULLONG_MAX)
145                 optval->value = value;
146         else if (string)
147                 optval->string = string;
148
149         if (extra && extra_len <= BOND_OPT_EXTRA_MAXLEN)
150                 memcpy(optval->extra, extra, extra_len);
151 }
152 #define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value, NULL, 0)
153 #define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX, NULL, 0)
154 #define bond_opt_initextra(optval, extra, extra_len) \
155         __bond_opt_init(optval, NULL, ULLONG_MAX, extra, extra_len)
156 #define bond_opt_slave_initval(optval, slave_dev, value) \
157         __bond_opt_init(optval, NULL, value, slave_dev, sizeof(struct net_device *))
158
159 void bond_option_arp_ip_targets_clear(struct bonding *bond);
160 #if IS_ENABLED(CONFIG_IPV6)
161 void bond_option_ns_ip6_targets_clear(struct bonding *bond);
162 #endif
163
164 #endif /* _NET_BOND_OPTIONS_H */