1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (c) 2001-2002 by David Brownell
6 #ifndef __LINUX_USB_EHCI_DEF_H
7 #define __LINUX_USB_EHCI_DEF_H
9 #include <linux/usb/ehci-dbgp.h>
11 /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
13 /* Section 2.2 Host Controller Capability Registers */
15 /* these fields are specified as 8 and 16 bit registers,
16 * but some hosts can't perform 8 or 16 bit PCI accesses.
17 * some hosts treat caplength and hciversion as parts of a 32-bit
18 * register, others treat them as two separate registers, this
19 * affects the memory map for big endian controllers.
22 #define HC_LENGTH(ehci, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
23 (ehci_big_endian_capbase(ehci) ? 24 : 0)))
24 #define HC_VERSION(ehci, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \
25 (ehci_big_endian_capbase(ehci) ? 0 : 16)))
26 u32 hcs_params; /* HCSPARAMS - offset 0x4 */
27 #define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
28 #define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
29 #define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
30 #define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
31 #define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
32 #define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
33 #define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
34 #define HCS_N_PORTS_MAX 15 /* N_PORTS valid 0x1-0xF */
36 u32 hcc_params; /* HCCPARAMS - offset 0x8 */
37 /* EHCI 1.1 addendum */
38 #define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19))
39 #define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18))
40 #define HCC_LPM(p) ((p)&(1 << 17))
41 #define HCC_HW_PREFETCH(p) ((p)&(1 << 16))
43 #define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
44 #define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
45 #define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
46 #define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
47 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
48 #define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
49 u8 portroute[8]; /* nibbles for routing - offset 0xC */
53 /* Section 2.3 Host Controller Operational Registers */
56 /* USBCMD: offset 0x00 */
59 /* EHCI 1.1 addendum */
60 #define CMD_HIRD (0xf<<24) /* host initiated resume duration */
61 #define CMD_PPCEE (1<<15) /* per port change event enable */
62 #define CMD_FSP (1<<14) /* fully synchronized prefetch */
63 #define CMD_ASPE (1<<13) /* async schedule prefetch enable */
64 #define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */
65 /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
66 #define CMD_PARK (1<<11) /* enable "park" on async qh */
67 #define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
68 #define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
69 #define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
70 #define CMD_ASE (1<<5) /* async schedule enable */
71 #define CMD_PSE (1<<4) /* periodic schedule enable */
72 /* 3:2 is periodic frame list size */
73 #define CMD_RESET (1<<1) /* reset HC not bus */
74 #define CMD_RUN (1<<0) /* start/stop HC */
76 /* USBSTS: offset 0x04 */
78 #define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */
79 #define STS_ASS (1<<15) /* Async Schedule Status */
80 #define STS_PSS (1<<14) /* Periodic Schedule Status */
81 #define STS_RECL (1<<13) /* Reclamation */
82 #define STS_HALT (1<<12) /* Not running (any reason) */
83 /* some bits reserved */
84 /* these STS_* flags are also intr_enable bits (USBINTR) */
85 #define STS_IAA (1<<5) /* Interrupted on async advance */
86 #define STS_FATAL (1<<4) /* such as some PCI access errors */
87 #define STS_FLR (1<<3) /* frame list rolled over */
88 #define STS_PCD (1<<2) /* port change detect */
89 #define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
90 #define STS_INT (1<<0) /* "normal" completion (short, ...) */
92 /* USBINTR: offset 0x08 */
95 /* FRINDEX: offset 0x0C */
96 u32 frame_index; /* current microframe number */
97 /* CTRLDSSEGMENT: offset 0x10 */
98 u32 segment; /* address bits 63:32 if needed */
99 /* PERIODICLISTBASE: offset 0x14 */
100 u32 frame_list; /* points to periodic list */
101 /* ASYNCLISTADDR: offset 0x18 */
102 u32 async_next; /* address of next async queue head */
106 /* TXFILLTUNING: offset 0x24 */
107 u32 txfill_tuning; /* TX FIFO Tuning register */
108 #define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */
112 /* CONFIGFLAG: offset 0x40 */
114 #define FLAG_CF (1<<0) /* true: we'll support "high speed" */
117 /* PORTSC: offset 0x44 */
118 u32 port_status[HCS_N_PORTS_MAX]; /* up to N_PORTS */
119 /* EHCI 1.1 addendum */
120 #define PORTSC_SUSPEND_STS_ACK 0
121 #define PORTSC_SUSPEND_STS_NYET 1
122 #define PORTSC_SUSPEND_STS_STALL 2
123 #define PORTSC_SUSPEND_STS_ERR 3
125 #define PORT_DEV_ADDR (0x7f<<25) /* device address */
126 #define PORT_SSTS (0x3<<23) /* suspend status */
128 #define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
129 #define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
130 #define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
131 /* 19:16 for port testing */
132 #define PORT_TEST(x) (((x)&0xf)<<16) /* Port Test Control */
133 #define PORT_TEST_PKT PORT_TEST(0x4) /* Port Test Control - packet test */
134 #define PORT_TEST_FORCE PORT_TEST(0x5) /* Port Test Control - force enable */
135 #define PORT_LED_OFF (0<<14)
136 #define PORT_LED_AMBER (1<<14)
137 #define PORT_LED_GREEN (2<<14)
138 #define PORT_LED_MASK (3<<14)
139 #define PORT_OWNER (1<<13) /* true: companion hc owns this port */
140 #define PORT_POWER (1<<12) /* true: has power (see PPC) */
141 #define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
142 #define PORT_LS_MASK (3<<10) /* Link status (SE0, K or J */
144 #define PORT_LPM (1<<9) /* LPM transaction */
145 #define PORT_RESET (1<<8) /* reset port */
146 #define PORT_SUSPEND (1<<7) /* suspend port */
147 #define PORT_RESUME (1<<6) /* resume it */
148 #define PORT_OCC (1<<5) /* over current change */
149 #define PORT_OC (1<<4) /* over current active */
150 #define PORT_PEC (1<<3) /* port enable change */
151 #define PORT_PE (1<<2) /* port enable */
152 #define PORT_CSC (1<<1) /* connect status change */
153 #define PORT_CONNECT (1<<0) /* device connected */
154 #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
157 /* USBMODE: offset 0x68 */
158 u32 usbmode; /* USB Device mode */
160 #define USBMODE_SDIS (1<<3) /* Stream disable */
161 #define USBMODE_BE (1<<2) /* BE/LE endianness select */
162 #define USBMODE_CM_HC (3<<0) /* host controller mode */
163 #define USBMODE_CM_IDLE (0<<0) /* idle state */
166 /* Moorestown has some non-standard registers, partially due to the fact that
167 * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
173 /* HOSTPC: offset 0x84 */
174 u32 hostpc[HCS_N_PORTS_MAX];
175 #define HOSTPC_PHCD (1<<22) /* Phy clock disable */
176 #define HOSTPC_PSPD (3<<25) /* Port speed detection */
179 /* Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x80 */
185 /* USBMODE_EX: offset 0xc8 */
186 u32 usbmode_ex; /* USB Device mode extension */
187 #define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */
188 #define USBMODE_EX_HC (3<<0) /* host controller mode */
191 #endif /* __LINUX_USB_EHCI_DEF_H */