GNU Linux-libre 5.10.217-gnu1
[releases.git] / include / linux / ethtool.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * ethtool.h: Defines for Linux ethtool.
4  *
5  * Copyright (C) 1998 David S. Miller (davem@redhat.com)
6  * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
7  * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
8  * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
9  *                                christopher.leech@intel.com,
10  *                                scott.feldman@intel.com)
11  * Portions Copyright (C) Sun Microsystems 2008
12  */
13 #ifndef _LINUX_ETHTOOL_H
14 #define _LINUX_ETHTOOL_H
15
16 #include <linux/bitmap.h>
17 #include <linux/compat.h>
18 #include <uapi/linux/ethtool.h>
19
20 struct compat_ethtool_rx_flow_spec {
21         u32             flow_type;
22         union ethtool_flow_union h_u;
23         struct ethtool_flow_ext h_ext;
24         union ethtool_flow_union m_u;
25         struct ethtool_flow_ext m_ext;
26         compat_u64      ring_cookie;
27         u32             location;
28 };
29
30 struct compat_ethtool_rxnfc {
31         u32                             cmd;
32         u32                             flow_type;
33         compat_u64                      data;
34         struct compat_ethtool_rx_flow_spec fs;
35         u32                             rule_cnt;
36         u32                             rule_locs[];
37 };
38
39 #include <linux/rculist.h>
40
41 /**
42  * enum ethtool_phys_id_state - indicator state for physical identification
43  * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
44  * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
45  * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
46  *      is not supported)
47  * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
48  *      is not supported)
49  */
50 enum ethtool_phys_id_state {
51         ETHTOOL_ID_INACTIVE,
52         ETHTOOL_ID_ACTIVE,
53         ETHTOOL_ID_ON,
54         ETHTOOL_ID_OFF
55 };
56
57 enum {
58         ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */
59         ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */
60         ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */
61
62         /*
63          * Add your fresh new hash function bits above and remember to update
64          * rss_hash_func_strings[] in ethtool.c
65          */
66         ETH_RSS_HASH_FUNCS_COUNT
67 };
68
69 #define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit))
70 #define __ETH_RSS_HASH(name)    __ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
71
72 #define ETH_RSS_HASH_TOP        __ETH_RSS_HASH(TOP)
73 #define ETH_RSS_HASH_XOR        __ETH_RSS_HASH(XOR)
74 #define ETH_RSS_HASH_CRC32      __ETH_RSS_HASH(CRC32)
75
76 #define ETH_RSS_HASH_UNKNOWN    0
77 #define ETH_RSS_HASH_NO_CHANGE  0
78
79 struct net_device;
80
81 /* Some generic methods drivers may use in their ethtool_ops */
82 u32 ethtool_op_get_link(struct net_device *dev);
83 int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
84
85
86 /**
87  * struct ethtool_link_ext_state_info - link extended state and substate.
88  */
89 struct ethtool_link_ext_state_info {
90         enum ethtool_link_ext_state link_ext_state;
91         union {
92                 enum ethtool_link_ext_substate_autoneg autoneg;
93                 enum ethtool_link_ext_substate_link_training link_training;
94                 enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch;
95                 enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity;
96                 enum ethtool_link_ext_substate_cable_issue cable_issue;
97                 u8 __link_ext_substate;
98         };
99 };
100
101 /**
102  * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
103  * @index: Index in RX flow hash indirection table
104  * @n_rx_rings: Number of RX rings to use
105  *
106  * This function provides the default policy for RX flow hash indirection.
107  */
108 static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
109 {
110         return index % n_rx_rings;
111 }
112
113 /* declare a link mode bitmap */
114 #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name)          \
115         DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS)
116
117 /* drivers must ignore base.cmd and base.link_mode_masks_nwords
118  * fields, but they are allowed to overwrite them (will be ignored).
119  */
120 struct ethtool_link_ksettings {
121         struct ethtool_link_settings base;
122         struct {
123                 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
124                 __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
125                 __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
126         } link_modes;
127 };
128
129 /**
130  * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask
131  *   @ptr : pointer to struct ethtool_link_ksettings
132  *   @name : one of supported/advertising/lp_advertising
133  */
134 #define ethtool_link_ksettings_zero_link_mode(ptr, name)                \
135         bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS)
136
137 /**
138  * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings
139  * link mode mask
140  *   @ptr : pointer to struct ethtool_link_ksettings
141  *   @name : one of supported/advertising/lp_advertising
142  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
143  * (not atomic, no bound checking)
144  */
145 #define ethtool_link_ksettings_add_link_mode(ptr, name, mode)           \
146         __set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
147
148 /**
149  * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings
150  * link mode mask
151  *   @ptr : pointer to struct ethtool_link_ksettings
152  *   @name : one of supported/advertising/lp_advertising
153  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
154  * (not atomic, no bound checking)
155  */
156 #define ethtool_link_ksettings_del_link_mode(ptr, name, mode)           \
157         __clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
158
159 /**
160  * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask
161  *   @ptr : pointer to struct ethtool_link_ksettings
162  *   @name : one of supported/advertising/lp_advertising
163  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
164  * (not atomic, no bound checking)
165  *
166  * Returns true/false.
167  */
168 #define ethtool_link_ksettings_test_link_mode(ptr, name, mode)          \
169         test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
170
171 extern int
172 __ethtool_get_link_ksettings(struct net_device *dev,
173                              struct ethtool_link_ksettings *link_ksettings);
174
175 /**
176  * ethtool_intersect_link_masks - Given two link masks, AND them together
177  * @dst: first mask and where result is stored
178  * @src: second mask to intersect with
179  *
180  * Given two link mode masks, AND them together and save the result in dst.
181  */
182 void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst,
183                                   struct ethtool_link_ksettings *src);
184
185 void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst,
186                                              u32 legacy_u32);
187
188 /* return false if src had higher bits set. lower bits always updated. */
189 bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
190                                      const unsigned long *src);
191
192 #define ETHTOOL_COALESCE_RX_USECS               BIT(0)
193 #define ETHTOOL_COALESCE_RX_MAX_FRAMES          BIT(1)
194 #define ETHTOOL_COALESCE_RX_USECS_IRQ           BIT(2)
195 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ      BIT(3)
196 #define ETHTOOL_COALESCE_TX_USECS               BIT(4)
197 #define ETHTOOL_COALESCE_TX_MAX_FRAMES          BIT(5)
198 #define ETHTOOL_COALESCE_TX_USECS_IRQ           BIT(6)
199 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ      BIT(7)
200 #define ETHTOOL_COALESCE_STATS_BLOCK_USECS      BIT(8)
201 #define ETHTOOL_COALESCE_USE_ADAPTIVE_RX        BIT(9)
202 #define ETHTOOL_COALESCE_USE_ADAPTIVE_TX        BIT(10)
203 #define ETHTOOL_COALESCE_PKT_RATE_LOW           BIT(11)
204 #define ETHTOOL_COALESCE_RX_USECS_LOW           BIT(12)
205 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW      BIT(13)
206 #define ETHTOOL_COALESCE_TX_USECS_LOW           BIT(14)
207 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW      BIT(15)
208 #define ETHTOOL_COALESCE_PKT_RATE_HIGH          BIT(16)
209 #define ETHTOOL_COALESCE_RX_USECS_HIGH          BIT(17)
210 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH     BIT(18)
211 #define ETHTOOL_COALESCE_TX_USECS_HIGH          BIT(19)
212 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH     BIT(20)
213 #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL   BIT(21)
214
215 #define ETHTOOL_COALESCE_USECS                                          \
216         (ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
217 #define ETHTOOL_COALESCE_MAX_FRAMES                                     \
218         (ETHTOOL_COALESCE_RX_MAX_FRAMES | ETHTOOL_COALESCE_TX_MAX_FRAMES)
219 #define ETHTOOL_COALESCE_USECS_IRQ                                      \
220         (ETHTOOL_COALESCE_RX_USECS_IRQ | ETHTOOL_COALESCE_TX_USECS_IRQ)
221 #define ETHTOOL_COALESCE_MAX_FRAMES_IRQ         \
222         (ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ |   \
223          ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ)
224 #define ETHTOOL_COALESCE_USE_ADAPTIVE                                   \
225         (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | ETHTOOL_COALESCE_USE_ADAPTIVE_TX)
226 #define ETHTOOL_COALESCE_USECS_LOW_HIGH                                 \
227         (ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_TX_USECS_LOW | \
228          ETHTOOL_COALESCE_RX_USECS_HIGH | ETHTOOL_COALESCE_TX_USECS_HIGH)
229 #define ETHTOOL_COALESCE_MAX_FRAMES_LOW_HIGH    \
230         (ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW |   \
231          ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW |   \
232          ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH |  \
233          ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH)
234 #define ETHTOOL_COALESCE_PKT_RATE_RX_USECS                              \
235         (ETHTOOL_COALESCE_USE_ADAPTIVE_RX |                             \
236          ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \
237          ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \
238          ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL)
239
240 #define ETHTOOL_STAT_NOT_SET    (~0ULL)
241
242 /**
243  * struct ethtool_pause_stats - statistics for IEEE 802.3x pause frames
244  * @tx_pause_frames: transmitted pause frame count. Reported to user space
245  *      as %ETHTOOL_A_PAUSE_STAT_TX_FRAMES.
246  *
247  *      Equivalent to `30.3.4.2 aPAUSEMACCtrlFramesTransmitted`
248  *      from the standard.
249  *
250  * @rx_pause_frames: received pause frame count. Reported to user space
251  *      as %ETHTOOL_A_PAUSE_STAT_RX_FRAMES. Equivalent to:
252  *
253  *      Equivalent to `30.3.4.3 aPAUSEMACCtrlFramesReceived`
254  *      from the standard.
255  */
256 struct ethtool_pause_stats {
257         u64 tx_pause_frames;
258         u64 rx_pause_frames;
259 };
260
261 /**
262  * struct ethtool_ops - optional netdev operations
263  * @supported_coalesce_params: supported types of interrupt coalescing.
264  * @get_drvinfo: Report driver/device information.  Should only set the
265  *      @driver, @version, @fw_version and @bus_info fields.  If not
266  *      implemented, the @driver and @bus_info fields will be filled in
267  *      according to the netdev's parent device.
268  * @get_regs_len: Get buffer length required for @get_regs
269  * @get_regs: Get device registers
270  * @get_wol: Report whether Wake-on-Lan is enabled
271  * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
272  *      or zero.
273  * @get_msglevel: Report driver message level.  This should be the value
274  *      of the @msg_enable field used by netif logging functions.
275  * @set_msglevel: Set driver message level
276  * @nway_reset: Restart autonegotiation.  Returns a negative error code
277  *      or zero.
278  * @get_link: Report whether physical link is up.  Will only be called if
279  *      the netdev is up.  Should usually be set to ethtool_op_get_link(),
280  *      which uses netif_carrier_ok().
281  * @get_link_ext_state: Report link extended state. Should set link_ext_state and
282  *      link_ext_substate (link_ext_substate of 0 means link_ext_substate is unknown,
283  *      do not attach ext_substate attribute to netlink message). If link_ext_state
284  *      and link_ext_substate are unknown, return -ENODATA. If not implemented,
285  *      link_ext_state and link_ext_substate will not be sent to userspace.
286  * @get_eeprom: Read data from the device EEPROM.
287  *      Should fill in the magic field.  Don't need to check len for zero
288  *      or wraparound.  Fill in the data argument with the eeprom values
289  *      from offset to offset + len.  Update len to the amount read.
290  *      Returns an error or zero.
291  * @set_eeprom: Write data to the device EEPROM.
292  *      Should validate the magic field.  Don't need to check len for zero
293  *      or wraparound.  Update len to the amount written.  Returns an error
294  *      or zero.
295  * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
296  *      error code or zero.
297  * @set_coalesce: Set interrupt coalescing parameters.  Supported coalescing
298  *      types should be set in @supported_coalesce_params.
299  *      Returns a negative error code or zero.
300  * @get_ringparam: Report ring sizes
301  * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
302  * @get_pause_stats: Report pause frame statistics. Drivers must not zero
303  *      statistics which they don't report. The stats structure is initialized
304  *      to ETHTOOL_STAT_NOT_SET indicating driver does not report statistics.
305  * @get_pauseparam: Report pause parameters
306  * @set_pauseparam: Set pause parameters.  Returns a negative error code
307  *      or zero.
308  * @self_test: Run specified self-tests
309  * @get_strings: Return a set of strings that describe the requested objects
310  * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
311  *      attached to it.  The implementation may update the indicator
312  *      asynchronously or synchronously, but in either case it must return
313  *      quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
314  *      and must either activate asynchronous updates and return zero, return
315  *      a negative error or return a positive frequency for synchronous
316  *      indication (e.g. 1 for one on/off cycle per second).  If it returns
317  *      a frequency then it will be called again at intervals with the
318  *      argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
319  *      the indicator accordingly.  Finally, it is called with the argument
320  *      %ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
321  *      negative error code or zero.
322  * @get_ethtool_stats: Return extended statistics about the device.
323  *      This is only useful if the device maintains statistics not
324  *      included in &struct rtnl_link_stats64.
325  * @begin: Function to be called before any other operation.  Returns a
326  *      negative error code or zero.
327  * @complete: Function to be called after any other operation except
328  *      @begin.  Will be called even if the other operation failed.
329  * @get_priv_flags: Report driver-specific feature flags.
330  * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
331  *      error code or zero.
332  * @get_sset_count: Get number of strings that @get_strings will write.
333  * @get_rxnfc: Get RX flow classification rules.  Returns a negative
334  *      error code or zero.
335  * @set_rxnfc: Set RX flow classification rules.  Returns a negative
336  *      error code or zero.
337  * @flash_device: Write a firmware image to device's flash memory.
338  *      Returns a negative error code or zero.
339  * @reset: Reset (part of) the device, as specified by a bitmask of
340  *      flags from &enum ethtool_reset_flags.  Returns a negative
341  *      error code or zero.
342  * @get_rxfh_key_size: Get the size of the RX flow hash key.
343  *      Returns zero if not supported for this specific device.
344  * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
345  *      Returns zero if not supported for this specific device.
346  * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
347  *      and/or hash function.
348  *      Returns a negative error code or zero.
349  * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
350  *      key, and/or hash function.  Arguments which are set to %NULL or zero
351  *      will remain unchanged.
352  *      Returns a negative error code or zero. An error code must be returned
353  *      if at least one unsupported change was requested.
354  * @get_rxfh_context: Get the contents of the RX flow hash indirection table,
355  *      hash key, and/or hash function assiciated to the given rss context.
356  *      Returns a negative error code or zero.
357  * @set_rxfh_context: Create, remove and configure RSS contexts. Allows setting
358  *      the contents of the RX flow hash indirection table, hash key, and/or
359  *      hash function associated to the given context. Arguments which are set
360  *      to %NULL or zero will remain unchanged.
361  *      Returns a negative error code or zero. An error code must be returned
362  *      if at least one unsupported change was requested.
363  * @get_channels: Get number of channels.
364  * @set_channels: Set number of channels.  Returns a negative error code or
365  *      zero.
366  * @get_dump_flag: Get dump flag indicating current dump length, version,
367  *                 and flag of the device.
368  * @get_dump_data: Get dump data.
369  * @set_dump: Set dump specific flags to the device.
370  * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
371  *      Drivers supporting transmit time stamps in software should set this to
372  *      ethtool_op_get_ts_info().
373  * @get_module_info: Get the size and type of the eeprom contained within
374  *      a plug-in module.
375  * @get_module_eeprom: Get the eeprom information from the plug-in module
376  * @get_eee: Get Energy-Efficient (EEE) supported and status.
377  * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
378  * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
379  *      It must check that the given queue number is valid. If neither a RX nor
380  *      a TX queue has this number, return -EINVAL. If only a RX queue or a TX
381  *      queue has this number, set the inapplicable fields to ~0 and return 0.
382  *      Returns a negative error code or zero.
383  * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
384  *      It must check that the given queue number is valid. If neither a RX nor
385  *      a TX queue has this number, return -EINVAL. If only a RX queue or a TX
386  *      queue has this number, ignore the inapplicable fields. Supported
387  *      coalescing types should be set in @supported_coalesce_params.
388  *      Returns a negative error code or zero.
389  * @get_link_ksettings: Get various device settings including Ethernet link
390  *      settings. The %cmd and %link_mode_masks_nwords fields should be
391  *      ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
392  *      any change to them will be overwritten by kernel. Returns a negative
393  *      error code or zero.
394  * @set_link_ksettings: Set various device settings including Ethernet link
395  *      settings. The %cmd and %link_mode_masks_nwords fields should be
396  *      ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
397  *      any change to them will be overwritten by kernel. Returns a negative
398  *      error code or zero.
399  * @get_fecparam: Get the network device Forward Error Correction parameters.
400  * @set_fecparam: Set the network device Forward Error Correction parameters.
401  * @get_ethtool_phy_stats: Return extended statistics about the PHY device.
402  *      This is only useful if the device maintains PHY statistics and
403  *      cannot use the standard PHY library helpers.
404  *
405  * All operations are optional (i.e. the function pointer may be set
406  * to %NULL) and callers must take this into account.  Callers must
407  * hold the RTNL lock.
408  *
409  * See the structures used by these operations for further documentation.
410  * Note that for all operations using a structure ending with a zero-
411  * length array, the array is allocated separately in the kernel and
412  * is passed to the driver as an additional parameter.
413  *
414  * See &struct net_device and &struct net_device_ops for documentation
415  * of the generic netdev features interface.
416  */
417 struct ethtool_ops {
418         u32     supported_coalesce_params;
419         void    (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
420         int     (*get_regs_len)(struct net_device *);
421         void    (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
422         void    (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
423         int     (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
424         u32     (*get_msglevel)(struct net_device *);
425         void    (*set_msglevel)(struct net_device *, u32);
426         int     (*nway_reset)(struct net_device *);
427         u32     (*get_link)(struct net_device *);
428         int     (*get_link_ext_state)(struct net_device *,
429                                       struct ethtool_link_ext_state_info *);
430         int     (*get_eeprom_len)(struct net_device *);
431         int     (*get_eeprom)(struct net_device *,
432                               struct ethtool_eeprom *, u8 *);
433         int     (*set_eeprom)(struct net_device *,
434                               struct ethtool_eeprom *, u8 *);
435         int     (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
436         int     (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
437         void    (*get_ringparam)(struct net_device *,
438                                  struct ethtool_ringparam *);
439         int     (*set_ringparam)(struct net_device *,
440                                  struct ethtool_ringparam *);
441         void    (*get_pause_stats)(struct net_device *dev,
442                                    struct ethtool_pause_stats *pause_stats);
443         void    (*get_pauseparam)(struct net_device *,
444                                   struct ethtool_pauseparam*);
445         int     (*set_pauseparam)(struct net_device *,
446                                   struct ethtool_pauseparam*);
447         void    (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
448         void    (*get_strings)(struct net_device *, u32 stringset, u8 *);
449         int     (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
450         void    (*get_ethtool_stats)(struct net_device *,
451                                      struct ethtool_stats *, u64 *);
452         int     (*begin)(struct net_device *);
453         void    (*complete)(struct net_device *);
454         u32     (*get_priv_flags)(struct net_device *);
455         int     (*set_priv_flags)(struct net_device *, u32);
456         int     (*get_sset_count)(struct net_device *, int);
457         int     (*get_rxnfc)(struct net_device *,
458                              struct ethtool_rxnfc *, u32 *rule_locs);
459         int     (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
460         int     (*flash_device)(struct net_device *, struct ethtool_flash *);
461         int     (*reset)(struct net_device *, u32 *);
462         u32     (*get_rxfh_key_size)(struct net_device *);
463         u32     (*get_rxfh_indir_size)(struct net_device *);
464         int     (*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
465                             u8 *hfunc);
466         int     (*set_rxfh)(struct net_device *, const u32 *indir,
467                             const u8 *key, const u8 hfunc);
468         int     (*get_rxfh_context)(struct net_device *, u32 *indir, u8 *key,
469                                     u8 *hfunc, u32 rss_context);
470         int     (*set_rxfh_context)(struct net_device *, const u32 *indir,
471                                     const u8 *key, const u8 hfunc,
472                                     u32 *rss_context, bool delete);
473         void    (*get_channels)(struct net_device *, struct ethtool_channels *);
474         int     (*set_channels)(struct net_device *, struct ethtool_channels *);
475         int     (*get_dump_flag)(struct net_device *, struct ethtool_dump *);
476         int     (*get_dump_data)(struct net_device *,
477                                  struct ethtool_dump *, void *);
478         int     (*set_dump)(struct net_device *, struct ethtool_dump *);
479         int     (*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
480         int     (*get_module_info)(struct net_device *,
481                                    struct ethtool_modinfo *);
482         int     (*get_module_eeprom)(struct net_device *,
483                                      struct ethtool_eeprom *, u8 *);
484         int     (*get_eee)(struct net_device *, struct ethtool_eee *);
485         int     (*set_eee)(struct net_device *, struct ethtool_eee *);
486         int     (*get_tunable)(struct net_device *,
487                                const struct ethtool_tunable *, void *);
488         int     (*set_tunable)(struct net_device *,
489                                const struct ethtool_tunable *, const void *);
490         int     (*get_per_queue_coalesce)(struct net_device *, u32,
491                                           struct ethtool_coalesce *);
492         int     (*set_per_queue_coalesce)(struct net_device *, u32,
493                                           struct ethtool_coalesce *);
494         int     (*get_link_ksettings)(struct net_device *,
495                                       struct ethtool_link_ksettings *);
496         int     (*set_link_ksettings)(struct net_device *,
497                                       const struct ethtool_link_ksettings *);
498         int     (*get_fecparam)(struct net_device *,
499                                       struct ethtool_fecparam *);
500         int     (*set_fecparam)(struct net_device *,
501                                       struct ethtool_fecparam *);
502         void    (*get_ethtool_phy_stats)(struct net_device *,
503                                          struct ethtool_stats *, u64 *);
504         int     (*get_phy_tunable)(struct net_device *,
505                                    const struct ethtool_tunable *, void *);
506         int     (*set_phy_tunable)(struct net_device *,
507                                    const struct ethtool_tunable *, const void *);
508 };
509
510 int ethtool_check_ops(const struct ethtool_ops *ops);
511
512 struct ethtool_rx_flow_rule {
513         struct flow_rule        *rule;
514         unsigned long           priv[];
515 };
516
517 struct ethtool_rx_flow_spec_input {
518         const struct ethtool_rx_flow_spec       *fs;
519         u32                                     rss_ctx;
520 };
521
522 struct ethtool_rx_flow_rule *
523 ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input);
524 void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *rule);
525
526 bool ethtool_virtdev_validate_cmd(const struct ethtool_link_ksettings *cmd);
527 int ethtool_virtdev_set_link_ksettings(struct net_device *dev,
528                                        const struct ethtool_link_ksettings *cmd,
529                                        u32 *dev_speed, u8 *dev_duplex);
530
531 struct netlink_ext_ack;
532 struct phy_device;
533 struct phy_tdr_config;
534
535 /**
536  * struct ethtool_phy_ops - Optional PHY device options
537  * @get_sset_count: Get number of strings that @get_strings will write.
538  * @get_strings: Return a set of strings that describe the requested objects
539  * @get_stats: Return extended statistics about the PHY device.
540  * @start_cable_test - Start a cable test
541  * @start_cable_test_tdr - Start a Time Domain Reflectometry cable test
542  *
543  * All operations are optional (i.e. the function pointer may be set to %NULL)
544  * and callers must take this into account. Callers must hold the RTNL lock.
545  */
546 struct ethtool_phy_ops {
547         int (*get_sset_count)(struct phy_device *dev);
548         int (*get_strings)(struct phy_device *dev, u8 *data);
549         int (*get_stats)(struct phy_device *dev,
550                          struct ethtool_stats *stats, u64 *data);
551         int (*start_cable_test)(struct phy_device *phydev,
552                                 struct netlink_ext_ack *extack);
553         int (*start_cable_test_tdr)(struct phy_device *phydev,
554                                     struct netlink_ext_ack *extack,
555                                     const struct phy_tdr_config *config);
556 };
557
558 /**
559  * ethtool_set_ethtool_phy_ops - Set the ethtool_phy_ops singleton
560  * @ops: Ethtool PHY operations to set
561  */
562 void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops);
563
564 #endif /* _LINUX_ETHTOOL_H */