4 * Author: Dave Jiang <djiang@mvista.com>
6 * 2006-2008 (c) MontaVista Software, Inc. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
12 #ifndef _LINUX_EDAC_H_
13 #define _LINUX_EDAC_H_
15 #include <linux/atomic.h>
16 #include <linux/device.h>
17 #include <linux/completion.h>
18 #include <linux/workqueue.h>
19 #include <linux/debugfs.h>
20 #include <linux/numa.h>
24 #define EDAC_OPSTATE_INVAL -1
25 #define EDAC_OPSTATE_POLL 0
26 #define EDAC_OPSTATE_NMI 1
27 #define EDAC_OPSTATE_INT 2
29 extern int edac_op_state;
30 extern int edac_err_assert;
31 extern atomic_t edac_handlers;
33 extern int edac_handler_set(void);
34 extern void edac_atomic_assert_error(void);
35 extern struct bus_type *edac_get_sysfs_subsys(void);
38 EDAC_REPORTING_ENABLED,
39 EDAC_REPORTING_DISABLED,
43 extern int edac_report_status;
45 static inline int get_edac_report_status(void)
47 return edac_report_status;
50 static inline void set_edac_report_status(int new)
52 edac_report_status = new;
55 static inline int get_edac_report_status(void)
57 return EDAC_REPORTING_DISABLED;
60 static inline void set_edac_report_status(int new)
65 static inline void opstate_init(void)
67 switch (edac_op_state) {
68 case EDAC_OPSTATE_POLL:
69 case EDAC_OPSTATE_NMI:
72 edac_op_state = EDAC_OPSTATE_POLL;
77 /* Max length of a DIMM label*/
78 #define EDAC_MC_LABEL_LEN 31
80 /* Maximum size of the location string */
81 #define LOCATION_SIZE 256
83 /* Defines the maximum number of labels that can be reported */
84 #define EDAC_MAX_LABELS 8
86 /* String used to join two or more labels */
87 #define OTHER_LABEL " or "
90 * enum dev_type - describe the type of memory DRAM chips used at the stick
91 * @DEV_UNKNOWN: Can't be determined, or MC doesn't support detect it
92 * @DEV_X1: 1 bit for data
93 * @DEV_X2: 2 bits for data
94 * @DEV_X4: 4 bits for data
95 * @DEV_X8: 8 bits for data
96 * @DEV_X16: 16 bits for data
97 * @DEV_X32: 32 bits for data
98 * @DEV_X64: 64 bits for data
100 * Typical values are x4 and x8.
109 DEV_X32, /* Do these parts exist? */
110 DEV_X64 /* Do these parts exist? */
113 #define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN)
114 #define DEV_FLAG_X1 BIT(DEV_X1)
115 #define DEV_FLAG_X2 BIT(DEV_X2)
116 #define DEV_FLAG_X4 BIT(DEV_X4)
117 #define DEV_FLAG_X8 BIT(DEV_X8)
118 #define DEV_FLAG_X16 BIT(DEV_X16)
119 #define DEV_FLAG_X32 BIT(DEV_X32)
120 #define DEV_FLAG_X64 BIT(DEV_X64)
123 * enum hw_event_mc_err_type - type of the detected error
125 * @HW_EVENT_ERR_CORRECTED: Corrected Error - Indicates that an ECC
126 * corrected error was detected
127 * @HW_EVENT_ERR_UNCORRECTED: Uncorrected Error - Indicates an error that
128 * can't be corrected by ECC, but it is not
129 * fatal (maybe it is on an unused memory area,
130 * or the memory controller could recover from
131 * it for example, by re-trying the operation).
132 * @HW_EVENT_ERR_FATAL: Fatal Error - Uncorrected error that could not
135 enum hw_event_mc_err_type {
136 HW_EVENT_ERR_CORRECTED,
137 HW_EVENT_ERR_UNCORRECTED,
142 static inline char *mc_event_error_type(const unsigned int err_type)
145 case HW_EVENT_ERR_CORRECTED:
147 case HW_EVENT_ERR_UNCORRECTED:
148 return "Uncorrected";
149 case HW_EVENT_ERR_FATAL:
152 case HW_EVENT_ERR_INFO:
158 * enum mem_type - memory types. For a more detailed reference, please see
159 * http://en.wikipedia.org/wiki/DRAM
161 * @MEM_EMPTY Empty csrow
162 * @MEM_RESERVED: Reserved csrow type
163 * @MEM_UNKNOWN: Unknown csrow type
164 * @MEM_FPM: FPM - Fast Page Mode, used on systems up to 1995.
165 * @MEM_EDO: EDO - Extended data out, used on systems up to 1998.
166 * @MEM_BEDO: BEDO - Burst Extended data out, an EDO variant.
167 * @MEM_SDR: SDR - Single data rate SDRAM
168 * http://en.wikipedia.org/wiki/Synchronous_dynamic_random-access_memory
169 * They use 3 pins for chip select: Pins 0 and 2 are
170 * for rank 0; pins 1 and 3 are for rank 1, if the memory
172 * @MEM_RDR: Registered SDR SDRAM
173 * @MEM_DDR: Double data rate SDRAM
174 * http://en.wikipedia.org/wiki/DDR_SDRAM
175 * @MEM_RDDR: Registered Double data rate SDRAM
176 * This is a variant of the DDR memories.
177 * A registered memory has a buffer inside it, hiding
178 * part of the memory details to the memory controller.
179 * @MEM_RMBS: Rambus DRAM, used on a few Pentium III/IV controllers.
180 * @MEM_DDR2: DDR2 RAM, as described at JEDEC JESD79-2F.
181 * Those memories are labed as "PC2-" instead of "PC" to
182 * differenciate from DDR.
183 * @MEM_FB_DDR2: Fully-Buffered DDR2, as described at JEDEC Std No. 205
185 * Those memories are accessed per DIMM slot, and not by
186 * a chip select signal.
187 * @MEM_RDDR2: Registered DDR2 RAM
188 * This is a variant of the DDR2 memories.
189 * @MEM_XDR: Rambus XDR
190 * It is an evolution of the original RAMBUS memories,
191 * created to compete with DDR2. Weren't used on any
192 * x86 arch, but cell_edac PPC memory controller uses it.
193 * @MEM_DDR3: DDR3 RAM
194 * @MEM_RDDR3: Registered DDR3 RAM
195 * This is a variant of the DDR3 memories.
196 * @MEM_LRDDR3 Load-Reduced DDR3 memory.
197 * @MEM_DDR4: Unbuffered DDR4 RAM
198 * @MEM_RDDR4: Registered DDR4 RAM
199 * This is a variant of the DDR4 memories.
224 #define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
225 #define MEM_FLAG_RESERVED BIT(MEM_RESERVED)
226 #define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN)
227 #define MEM_FLAG_FPM BIT(MEM_FPM)
228 #define MEM_FLAG_EDO BIT(MEM_EDO)
229 #define MEM_FLAG_BEDO BIT(MEM_BEDO)
230 #define MEM_FLAG_SDR BIT(MEM_SDR)
231 #define MEM_FLAG_RDR BIT(MEM_RDR)
232 #define MEM_FLAG_DDR BIT(MEM_DDR)
233 #define MEM_FLAG_RDDR BIT(MEM_RDDR)
234 #define MEM_FLAG_RMBS BIT(MEM_RMBS)
235 #define MEM_FLAG_DDR2 BIT(MEM_DDR2)
236 #define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
237 #define MEM_FLAG_RDDR2 BIT(MEM_RDDR2)
238 #define MEM_FLAG_XDR BIT(MEM_XDR)
239 #define MEM_FLAG_DDR3 BIT(MEM_DDR3)
240 #define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)
241 #define MEM_FLAG_DDR4 BIT(MEM_DDR4)
242 #define MEM_FLAG_RDDR4 BIT(MEM_RDDR4)
245 * enum edac-type - Error Detection and Correction capabilities and mode
246 * @EDAC_UNKNOWN: Unknown if ECC is available
247 * @EDAC_NONE: Doesn't support ECC
248 * @EDAC_RESERVED: Reserved ECC type
249 * @EDAC_PARITY: Detects parity errors
250 * @EDAC_EC: Error Checking - no correction
251 * @EDAC_SECDED: Single bit error correction, Double detection
252 * @EDAC_S2ECD2ED: Chipkill x2 devices - do these exist?
253 * @EDAC_S4ECD4ED: Chipkill x4 devices
254 * @EDAC_S8ECD8ED: Chipkill x8 devices
255 * @EDAC_S16ECD16ED: Chipkill x16 devices
270 #define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN)
271 #define EDAC_FLAG_NONE BIT(EDAC_NONE)
272 #define EDAC_FLAG_PARITY BIT(EDAC_PARITY)
273 #define EDAC_FLAG_EC BIT(EDAC_EC)
274 #define EDAC_FLAG_SECDED BIT(EDAC_SECDED)
275 #define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED)
276 #define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED)
277 #define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED)
278 #define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED)
281 * enum scrub_type - scrubbing capabilities
282 * @SCRUB_UNKNOWN Unknown if scrubber is available
283 * @SCRUB_NONE: No scrubber
284 * @SCRUB_SW_PROG: SW progressive (sequential) scrubbing
285 * @SCRUB_SW_SRC: Software scrub only errors
286 * @SCRUB_SW_PROG_SRC: Progressive software scrub from an error
287 * @SCRUB_SW_TUNABLE: Software scrub frequency is tunable
288 * @SCRUB_HW_PROG: HW progressive (sequential) scrubbing
289 * @SCRUB_HW_SRC: Hardware scrub only errors
290 * @SCRUB_HW_PROG_SRC: Progressive hardware scrub from an error
291 * SCRUB_HW_TUNABLE: Hardware scrub frequency is tunable
306 #define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG)
307 #define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC)
308 #define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC)
309 #define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE)
310 #define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG)
311 #define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC)
312 #define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC)
313 #define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE)
315 /* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
317 /* EDAC internal operation states */
318 #define OP_ALLOC 0x100
319 #define OP_RUNNING_POLL 0x201
320 #define OP_RUNNING_INTERRUPT 0x202
321 #define OP_RUNNING_POLL_INTR 0x203
322 #define OP_OFFLINE 0x300
325 * Concepts used at the EDAC subsystem
327 * There are several things to be aware of that aren't at all obvious:
329 * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
331 * These are some of the many terms that are thrown about that don't always
332 * mean what people think they mean (Inconceivable!). In the interest of
333 * creating a common ground for discussion, terms and their definitions
334 * will be established.
336 * Memory devices: The individual DRAM chips on a memory stick. These
337 * devices commonly output 4 and 8 bits each (x4, x8).
338 * Grouping several of these in parallel provides the
339 * number of bits that the memory controller expects:
340 * typically 72 bits, in order to provide 64 bits +
341 * 8 bits of ECC data.
343 * Memory Stick: A printed circuit board that aggregates multiple
344 * memory devices in parallel. In general, this is the
345 * Field Replaceable Unit (FRU) which gets replaced, in
346 * the case of excessive errors. Most often it is also
347 * called DIMM (Dual Inline Memory Module).
349 * Memory Socket: A physical connector on the motherboard that accepts
350 * a single memory stick. Also called as "slot" on several
353 * Channel: A memory controller channel, responsible to communicate
354 * with a group of DIMMs. Each channel has its own
355 * independent control (command) and data bus, and can
356 * be used independently or grouped with other channels.
358 * Branch: It is typically the highest hierarchy on a
359 * Fully-Buffered DIMM memory controller.
360 * Typically, it contains two channels.
361 * Two channels at the same branch can be used in single
362 * mode or in lockstep mode.
363 * When lockstep is enabled, the cacheline is doubled,
364 * but it generally brings some performance penalty.
365 * Also, it is generally not possible to point to just one
366 * memory stick when an error occurs, as the error
367 * correction code is calculated using two DIMMs instead
368 * of one. Due to that, it is capable of correcting more
369 * errors than on single mode.
371 * Single-channel: The data accessed by the memory controller is contained
372 * into one dimm only. E. g. if the data is 64 bits-wide,
373 * the data flows to the CPU using one 64 bits parallel
375 * Typically used with SDR, DDR, DDR2 and DDR3 memories.
376 * FB-DIMM and RAMBUS use a different concept for channel,
377 * so this concept doesn't apply there.
379 * Double-channel: The data size accessed by the memory controller is
380 * interlaced into two dimms, accessed at the same time.
381 * E. g. if the DIMM is 64 bits-wide (72 bits with ECC),
382 * the data flows to the CPU using a 128 bits parallel
385 * Chip-select row: This is the name of the DRAM signal used to select the
386 * DRAM ranks to be accessed. Common chip-select rows for
387 * single channel are 64 bits, for dual channel 128 bits.
388 * It may not be visible by the memory controller, as some
389 * DIMM types have a memory buffer that can hide direct
390 * access to it from the Memory Controller.
392 * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory.
393 * Motherboards commonly drive two chip-select pins to
394 * a memory stick. A single-ranked stick, will occupy
395 * only one of those rows. The other will be unused.
397 * Double-Ranked stick: A double-ranked stick has two chip-select rows which
398 * access different sets of memory devices. The two
399 * rows cannot be accessed concurrently.
401 * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick.
402 * A double-sided stick has two chip-select rows which
403 * access different sets of memory devices. The two
404 * rows cannot be accessed concurrently. "Double-sided"
405 * is irrespective of the memory devices being mounted
406 * on both sides of the memory stick.
408 * Socket set: All of the memory sticks that are required for
409 * a single memory access or all of the memory sticks
410 * spanned by a chip-select row. A single socket set
411 * has two chip-select rows and if double-sided sticks
412 * are used these will occupy those chip-select rows.
414 * Bank: This term is avoided because it is unclear when
415 * needing to distinguish between chip-select rows and
425 * STRUCTURE ORGANIZATION AND CHOICES
429 * PS - I enjoyed writing all that about as much as you enjoyed reading it.
433 * enum edac_mc_layer - memory controller hierarchy layer
435 * @EDAC_MC_LAYER_BRANCH: memory layer is named "branch"
436 * @EDAC_MC_LAYER_CHANNEL: memory layer is named "channel"
437 * @EDAC_MC_LAYER_SLOT: memory layer is named "slot"
438 * @EDAC_MC_LAYER_CHIP_SELECT: memory layer is named "chip select"
439 * @EDAC_MC_LAYER_ALL_MEM: memory layout is unknown. All memory is mapped
440 * as a single memory area. This is used when
441 * retrieving errors from a firmware driven driver.
443 * This enum is used by the drivers to tell edac_mc_sysfs what name should
444 * be used when describing a memory stick location.
446 enum edac_mc_layer_type {
447 EDAC_MC_LAYER_BRANCH,
448 EDAC_MC_LAYER_CHANNEL,
450 EDAC_MC_LAYER_CHIP_SELECT,
451 EDAC_MC_LAYER_ALL_MEM,
455 * struct edac_mc_layer - describes the memory controller hierarchy
457 * @size: number of components per layer. For example,
458 * if the channel layer has two channels, size = 2
459 * @is_virt_csrow: This layer is part of the "csrow" when old API
460 * compatibility mode is enabled. Otherwise, it is
463 struct edac_mc_layer {
464 enum edac_mc_layer_type type;
470 * Maximum number of layers used by the memory controller to uniquely
471 * identify a single memory stick.
472 * NOTE: Changing this constant requires not only to change the constant
473 * below, but also to change the existing code at the core, as there are
474 * some code there that are optimized for 3 layers.
476 #define EDAC_MAX_LAYERS 3
479 * EDAC_DIMM_OFF - Macro responsible to get a pointer offset inside a pointer array
480 * for the element given by [layer0,layer1,layer2] position
482 * @layers: a struct edac_mc_layer array, describing how many elements
483 * were allocated for each layer
484 * @n_layers: Number of layers at the @layers array
485 * @layer0: layer0 position
486 * @layer1: layer1 position. Unused if n_layers < 2
487 * @layer2: layer2 position. Unused if n_layers < 3
489 * For 1 layer, this macro returns &var[layer0] - &var
490 * For 2 layers, this macro is similar to allocate a bi-dimensional array
491 * and to return "&var[layer0][layer1] - &var"
492 * For 3 layers, this macro is similar to allocate a tri-dimensional array
493 * and to return "&var[layer0][layer1][layer2] - &var"
495 * A loop could be used here to make it more generic, but, as we only have
496 * 3 layers, this is a little faster.
497 * By design, layers can never be 0 or more than 3. If that ever happens,
498 * a NULL is returned, causing an OOPS during the memory allocation routine,
499 * with would point to the developer that he's doing something wrong.
501 #define EDAC_DIMM_OFF(layers, nlayers, layer0, layer1, layer2) ({ \
503 if ((nlayers) == 1) \
505 else if ((nlayers) == 2) \
506 __i = (layer1) + ((layers[1]).size * (layer0)); \
507 else if ((nlayers) == 3) \
508 __i = (layer2) + ((layers[2]).size * ((layer1) + \
509 ((layers[1]).size * (layer0)))); \
516 * EDAC_DIMM_PTR - Macro responsible to get a pointer inside a pointer array
517 * for the element given by [layer0,layer1,layer2] position
519 * @layers: a struct edac_mc_layer array, describing how many elements
520 * were allocated for each layer
521 * @var: name of the var where we want to get the pointer
523 * @n_layers: Number of layers at the @layers array
524 * @layer0: layer0 position
525 * @layer1: layer1 position. Unused if n_layers < 2
526 * @layer2: layer2 position. Unused if n_layers < 3
528 * For 1 layer, this macro returns &var[layer0]
529 * For 2 layers, this macro is similar to allocate a bi-dimensional array
530 * and to return "&var[layer0][layer1]"
531 * For 3 layers, this macro is similar to allocate a tri-dimensional array
532 * and to return "&var[layer0][layer1][layer2]"
534 #define EDAC_DIMM_PTR(layers, var, nlayers, layer0, layer1, layer2) ({ \
536 int ___i = EDAC_DIMM_OFF(layers, nlayers, layer0, layer1, layer2); \
547 char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */
549 /* Memory location data */
550 unsigned location[EDAC_MAX_LAYERS];
552 struct mem_ctl_info *mci; /* the parent */
554 u32 grain; /* granularity of reported error in bytes */
555 enum dev_type dtype; /* memory device type */
556 enum mem_type mtype; /* memory dimm type */
557 enum edac_type edac_mode; /* EDAC mode for this dimm */
559 u32 nr_pages; /* number of pages on this dimm */
561 unsigned csrow, cschannel; /* Points to the old API data */
565 * struct rank_info - contains the information for one DIMM rank
567 * @chan_idx: channel number where the rank is (typically, 0 or 1)
568 * @ce_count: number of correctable errors for this rank
569 * @csrow: A pointer to the chip select row structure (the parent
570 * structure). The location of the rank is given by
571 * the (csrow->csrow_idx, chan_idx) vector.
572 * @dimm: A pointer to the DIMM structure, where the DIMM label
573 * information is stored.
575 * FIXME: Currently, the EDAC core model will assume one DIMM per rank.
576 * This is a bad assumption, but it makes this patch easier. Later
577 * patches in this series will fix this issue.
581 struct csrow_info *csrow;
582 struct dimm_info *dimm;
584 u32 ce_count; /* Correctable Errors for this csrow */
590 /* Used only by edac_mc_find_csrow_by_page() */
591 unsigned long first_page; /* first page number in csrow */
592 unsigned long last_page; /* last page number in csrow */
593 unsigned long page_mask; /* used for interleaving -
594 * 0UL for non intlv */
596 int csrow_idx; /* the chip-select row */
598 u32 ue_count; /* Uncorrectable Errors for this csrow */
599 u32 ce_count; /* Correctable Errors for this csrow */
601 struct mem_ctl_info *mci; /* the parent */
603 /* channel information for this csrow */
605 struct rank_info **channels;
609 * struct errcount_attribute - used to store the several error counts
611 struct errcount_attribute_data {
613 int pos[EDAC_MAX_LAYERS];
614 int layer0, layer1, layer2;
618 * edac_raw_error_desc - Raw error report structure
619 * @grain: minimum granularity for an error report, in bytes
620 * @error_count: number of errors of the same type
621 * @top_layer: top layer of the error (layer[0])
622 * @mid_layer: middle layer of the error (layer[1])
623 * @low_layer: low layer of the error (layer[2])
624 * @page_frame_number: page where the error happened
625 * @offset_in_page: page offset
626 * @syndrome: syndrome of the error (or 0 if unknown or if
627 * the syndrome is not applicable)
628 * @msg: error message
629 * @location: location of the error
630 * @label: label of the affected DIMM(s)
631 * @other_detail: other driver-specific detail about the error
632 * @enable_per_layer_report: if false, the error affects all layers
633 * (typically, a memory controller error)
635 struct edac_raw_error_desc {
637 * NOTE: everything before grain won't be cleaned by
638 * edac_raw_error_desc_clean()
640 char location[LOCATION_SIZE];
641 char label[(EDAC_MC_LABEL_LEN + 1 + sizeof(OTHER_LABEL)) * EDAC_MAX_LABELS];
644 /* the vars below and grain will be cleaned on every new error report */
649 unsigned long page_frame_number;
650 unsigned long offset_in_page;
651 unsigned long syndrome;
653 const char *other_detail;
654 bool enable_per_layer_report;
657 /* MEMORY controller information structure
659 struct mem_ctl_info {
661 struct bus_type *bus;
663 struct list_head link; /* for global list of mem_ctl_info structs */
665 struct module *owner; /* Module owner of this control struct */
667 unsigned long mtype_cap; /* memory types supported by mc */
668 unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */
669 unsigned long edac_cap; /* configuration capabilities - this is
670 * closely related to edac_ctl_cap. The
671 * difference is that the controller may be
672 * capable of s4ecd4ed which would be listed
673 * in edac_ctl_cap, but if channels aren't
674 * capable of s4ecd4ed then the edac_cap would
675 * not have that capability.
677 unsigned long scrub_cap; /* chipset scrub capabilities */
678 enum scrub_type scrub_mode; /* current scrub mode */
680 /* Translates sdram memory scrub rate given in bytes/sec to the
681 internal representation and configures whatever else needs
684 int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
686 /* Get the current sdram memory scrub rate from the internal
687 representation and converts it to the closest matching
688 bandwidth in bytes/sec.
690 int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
693 /* pointer to edac checking routine */
694 void (*edac_check) (struct mem_ctl_info * mci);
697 * Remaps memory pages: controller pages to physical pages.
698 * For most MC's, this will be NULL.
700 /* FIXME - why not send the phys page to begin with? */
701 unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
704 struct csrow_info **csrows;
705 unsigned nr_csrows, num_cschannel;
708 * Memory Controller hierarchy
710 * There are basically two types of memory controller: the ones that
711 * sees memory sticks ("dimms"), and the ones that sees memory ranks.
712 * All old memory controllers enumerate memories per rank, but most
713 * of the recent drivers enumerate memories per DIMM, instead.
714 * When the memory controller is per rank, csbased is true.
717 struct edac_mc_layer *layers;
721 * DIMM info. Will eventually remove the entire csrows_info some day
724 struct dimm_info **dimms;
727 * FIXME - what about controllers on other busses? - IDs must be
728 * unique. dev pointer should be sufficiently unique, but
729 * BUS:SLOT.FUNC numbers may not be unique.
732 const char *mod_name;
734 const char *ctl_name;
735 const char *dev_name;
737 unsigned long start_time; /* mci load start time (in jiffies) */
740 * drivers shouldn't access those fields directly, as the core
741 * already handles that.
743 u32 ce_noinfo_count, ue_noinfo_count;
745 u32 *ce_per_layer[EDAC_MAX_LAYERS], *ue_per_layer[EDAC_MAX_LAYERS];
747 struct completion complete;
749 /* Additional top controller level attributes, but specified
750 * by the low level driver.
752 * Set by the low level driver to provide attributes at the
754 * An array of structures, NULL terminated
756 * If attributes are desired, then set to array of attributes
757 * If no attributes are desired, leave NULL
759 const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
761 /* work struct for this MC */
762 struct delayed_work work;
765 * Used to report an error - by being at the global struct
766 * makes the memory allocated by the EDAC core
768 struct edac_raw_error_desc error_desc;
770 /* the internal state of this controller instance */
773 struct dentry *debugfs;
774 u8 fake_inject_layer[EDAC_MAX_LAYERS];
776 u16 fake_inject_count;
780 * Maximum number of memory controllers in the coherent fabric.
782 #define EDAC_MAX_MCS 2 * MAX_NUMNODES