GNU Linux-libre 5.4.241-gnu1

[releases.git] / include / linux / dmaengine.h

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * Copyright(c) 2004 - 2006 Intel Corporation. All rights reserved.
 */
#ifndef LINUX_DMAENGINE_H
#define LINUX_DMAENGINE_H

#include <linux/device.h>
#include <linux/err.h>
#include <linux/uio.h>
#include <linux/bug.h>
#include <linux/scatterlist.h>
#include <linux/bitmap.h>
#include <linux/types.h>
#include <asm/page.h>

/**
 * typedef dma_cookie_t - an opaque DMA cookie
 *
 * if dma_cookie_t is >0 it's a DMA request cookie, <0 it's an error code
 */
typedef s32 dma_cookie_t;
#define DMA_MIN_COOKIE  1

static inline int dma_submit_error(dma_cookie_t cookie)
{
        return cookie < 0 ? cookie : 0;
}

/**
 * enum dma_status - DMA transaction status
 * @DMA_COMPLETE: transaction completed
 * @DMA_IN_PROGRESS: transaction not yet processed
 * @DMA_PAUSED: transaction is paused
 * @DMA_ERROR: transaction failed
 */
enum dma_status {
        DMA_COMPLETE,
        DMA_IN_PROGRESS,
        DMA_PAUSED,
        DMA_ERROR,
};

/**
 * enum dma_transaction_type - DMA transaction types/indexes
 *
 * Note: The DMA_ASYNC_TX capability is not to be set by drivers.  It is
 * automatically set as dma devices are registered.
 */
enum dma_transaction_type {
        DMA_MEMCPY,
        DMA_XOR,
        DMA_PQ,
        DMA_XOR_VAL,
        DMA_PQ_VAL,
        DMA_MEMSET,
        DMA_MEMSET_SG,
        DMA_INTERRUPT,
        DMA_PRIVATE,
        DMA_ASYNC_TX,
        DMA_SLAVE,
        DMA_CYCLIC,
        DMA_INTERLEAVE,
/* last transaction type for creation of the capabilities mask */
        DMA_TX_TYPE_END,
};

/**
 * enum dma_transfer_direction - dma transfer mode and direction indicator
 * @DMA_MEM_TO_MEM: Async/Memcpy mode
 * @DMA_MEM_TO_DEV: Slave mode & From Memory to Device
 * @DMA_DEV_TO_MEM: Slave mode & From Device to Memory
 * @DMA_DEV_TO_DEV: Slave mode & From Device to Device
 */
enum dma_transfer_direction {
        DMA_MEM_TO_MEM,
        DMA_MEM_TO_DEV,
        DMA_DEV_TO_MEM,
        DMA_DEV_TO_DEV,
        DMA_TRANS_NONE,
};

/**
 * Interleaved Transfer Request
 * ----------------------------
 * A chunk is collection of contiguous bytes to be transfered.
 * The gap(in bytes) between two chunks is called inter-chunk-gap(ICG).
 * ICGs may or maynot change between chunks.
 * A FRAME is the smallest series of contiguous {chunk,icg} pairs,
 *  that when repeated an integral number of times, specifies the transfer.
 * A transfer template is specification of a Frame, the number of times
 *  it is to be repeated and other per-transfer attributes.
 *
 * Practically, a client driver would have ready a template for each
 *  type of transfer it is going to need during its lifetime and
 *  set only 'src_start' and 'dst_start' before submitting the requests.
 *
 *
 *  |      Frame-1        |       Frame-2       | ~ |       Frame-'numf'  |
 *  |====....==.===...=...|====....==.===...=...| ~ |====....==.===...=...|
 *
 *    ==  Chunk size
 *    ... ICG
 */

/**
 * struct data_chunk - Element of scatter-gather list that makes a frame.
 * @size: Number of bytes to read from source.
 *        size_dst := fn(op, size_src), so doesn't mean much for destination.
 * @icg: Number of bytes to jump after last src/dst address of this
 *       chunk and before first src/dst address for next chunk.
 *       Ignored for dst(assumed 0), if dst_inc is true and dst_sgl is false.
 *       Ignored for src(assumed 0), if src_inc is true and src_sgl is false.
 * @dst_icg: Number of bytes to jump after last dst address of this
 *       chunk and before the first dst address for next chunk.
 *       Ignored if dst_inc is true and dst_sgl is false.
 * @src_icg: Number of bytes to jump after last src address of this
 *       chunk and before the first src address for next chunk.
 *       Ignored if src_inc is true and src_sgl is false.
 */
struct data_chunk {
        size_t size;
        size_t icg;
        size_t dst_icg;
        size_t src_icg;
};

/**
 * struct dma_interleaved_template - Template to convey DMAC the transfer pattern
 *       and attributes.
 * @src_start: Bus address of source for the first chunk.
 * @dst_start: Bus address of destination for the first chunk.
 * @dir: Specifies the type of Source and Destination.
 * @src_inc: If the source address increments after reading from it.
 * @dst_inc: If the destination address increments after writing to it.
 * @src_sgl: If the 'icg' of sgl[] applies to Source (scattered read).
 *              Otherwise, source is read contiguously (icg ignored).
 *              Ignored if src_inc is false.
 * @dst_sgl: If the 'icg' of sgl[] applies to Destination (scattered write).
 *              Otherwise, destination is filled contiguously (icg ignored).
 *              Ignored if dst_inc is false.
 * @numf: Number of frames in this template.
 * @frame_size: Number of chunks in a frame i.e, size of sgl[].
 * @sgl: Array of {chunk,icg} pairs that make up a frame.
 */
struct dma_interleaved_template {
        dma_addr_t src_start;
        dma_addr_t dst_start;
        enum dma_transfer_direction dir;
        bool src_inc;
        bool dst_inc;
        bool src_sgl;
        bool dst_sgl;
        size_t numf;
        size_t frame_size;
        struct data_chunk sgl[0];
};

/**
 * enum dma_ctrl_flags - DMA flags to augment operation preparation,
 *  control completion, and communicate status.
 * @DMA_PREP_INTERRUPT - trigger an interrupt (callback) upon completion of
 *  this transaction
 * @DMA_CTRL_ACK - if clear, the descriptor cannot be reused until the client
 *  acknowledges receipt, i.e. has has a chance to establish any dependency
 *  chains
 * @DMA_PREP_PQ_DISABLE_P - prevent generation of P while generating Q
 * @DMA_PREP_PQ_DISABLE_Q - prevent generation of Q while generating P
 * @DMA_PREP_CONTINUE - indicate to a driver that it is reusing buffers as
 *  sources that were the result of a previous operation, in the case of a PQ
 *  operation it continues the calculation with new sources
 * @DMA_PREP_FENCE - tell the driver that subsequent operations depend
 *  on the result of this operation
 * @DMA_CTRL_REUSE: client can reuse the descriptor and submit again till
 *  cleared or freed
 * @DMA_PREP_CMD: tell the driver that the data passed to DMA API is command
 *  data and the descriptor should be in different format from normal
 *  data descriptors.
 */
enum dma_ctrl_flags {
        DMA_PREP_INTERRUPT = (1 << 0),
        DMA_CTRL_ACK = (1 << 1),
        DMA_PREP_PQ_DISABLE_P = (1 << 2),
        DMA_PREP_PQ_DISABLE_Q = (1 << 3),
        DMA_PREP_CONTINUE = (1 << 4),
        DMA_PREP_FENCE = (1 << 5),
        DMA_CTRL_REUSE = (1 << 6),
        DMA_PREP_CMD = (1 << 7),
};

/**
 * enum sum_check_bits - bit position of pq_check_flags
 */
enum sum_check_bits {
        SUM_CHECK_P = 0,
        SUM_CHECK_Q = 1,
};

/**
 * enum pq_check_flags - result of async_{xor,pq}_zero_sum operations
 * @SUM_CHECK_P_RESULT - 1 if xor zero sum error, 0 otherwise
 * @SUM_CHECK_Q_RESULT - 1 if reed-solomon zero sum error, 0 otherwise
 */
enum sum_check_flags {
        SUM_CHECK_P_RESULT = (1 << SUM_CHECK_P),
        SUM_CHECK_Q_RESULT = (1 << SUM_CHECK_Q),
};


/**
 * dma_cap_mask_t - capabilities bitmap modeled after cpumask_t.
 * See linux/cpumask.h
 */
typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t;

/**
 * struct dma_chan_percpu - the per-CPU part of struct dma_chan
 * @memcpy_count: transaction counter
 * @bytes_transferred: byte counter
 */

struct dma_chan_percpu {
        /* stats */
        unsigned long memcpy_count;
        unsigned long bytes_transferred;
};

/**
 * struct dma_router - DMA router structure
 * @dev: pointer to the DMA router device
 * @route_free: function to be called when the route can be disconnected
 */
struct dma_router {
        struct device *dev;
        void (*route_free)(struct device *dev, void *route_data);
};

/**
 * struct dma_chan - devices supply DMA channels, clients use them
 * @device: ptr to the dma device who supplies this channel, always !%NULL
 * @cookie: last cookie value returned to client
 * @completed_cookie: last completed cookie for this channel
 * @chan_id: channel ID for sysfs
 * @dev: class device for sysfs
 * @device_node: used to add this to the device chan list
 * @local: per-cpu pointer to a struct dma_chan_percpu
 * @client_count: how many clients are using this channel
 * @table_count: number of appearances in the mem-to-mem allocation table
 * @router: pointer to the DMA router structure
 * @route_data: channel specific data for the router
 * @private: private data for certain client-channel associations
 */
struct dma_chan {
        struct dma_device *device;
        dma_cookie_t cookie;
        dma_cookie_t completed_cookie;

        /* sysfs */
        int chan_id;
        struct dma_chan_dev *dev;

        struct list_head device_node;
        struct dma_chan_percpu __percpu *local;
        int client_count;
        int table_count;

        /* DMA router */
        struct dma_router *router;
        void *route_data;

        void *private;
};

/**
 * struct dma_chan_dev - relate sysfs device node to backing channel device
 * @chan: driver channel device
 * @device: sysfs device
 * @dev_id: parent dma_device dev_id
 * @idr_ref: reference count to gate release of dma_device dev_id
 */
struct dma_chan_dev {
        struct dma_chan *chan;
        struct device device;
        int dev_id;
        atomic_t *idr_ref;
};

/**
 * enum dma_slave_buswidth - defines bus width of the DMA slave
 * device, source or target buses
 */
enum dma_slave_buswidth {
        DMA_SLAVE_BUSWIDTH_UNDEFINED = 0,
        DMA_SLAVE_BUSWIDTH_1_BYTE = 1,
        DMA_SLAVE_BUSWIDTH_2_BYTES = 2,
        DMA_SLAVE_BUSWIDTH_3_BYTES = 3,
        DMA_SLAVE_BUSWIDTH_4_BYTES = 4,
        DMA_SLAVE_BUSWIDTH_8_BYTES = 8,
        DMA_SLAVE_BUSWIDTH_16_BYTES = 16,
        DMA_SLAVE_BUSWIDTH_32_BYTES = 32,
        DMA_SLAVE_BUSWIDTH_64_BYTES = 64,
};

/**
 * struct dma_slave_config - dma slave channel runtime config
 * @direction: whether the data shall go in or out on this slave
 * channel, right now. DMA_MEM_TO_DEV and DMA_DEV_TO_MEM are
 * legal values. DEPRECATED, drivers should use the direction argument
 * to the device_prep_slave_sg and device_prep_dma_cyclic functions or
 * the dir field in the dma_interleaved_template structure.
 * @src_addr: this is the physical address where DMA slave data
 * should be read (RX), if the source is memory this argument is
 * ignored.
 * @dst_addr: this is the physical address where DMA slave data
 * should be written (TX), if the source is memory this argument
 * is ignored.
 * @src_addr_width: this is the width in bytes of the source (RX)
 * register where DMA data shall be read. If the source
 * is memory this may be ignored depending on architecture.
 * Legal values: 1, 2, 3, 4, 8, 16, 32, 64.
 * @dst_addr_width: same as src_addr_width but for destination
 * target (TX) mutatis mutandis.
 * @src_maxburst: the maximum number of words (note: words, as in
 * units of the src_addr_width member, not bytes) that can be sent
 * in one burst to the device. Typically something like half the
 * FIFO depth on I/O peripherals so you don't overflow it. This
 * may or may not be applicable on memory sources.
 * @dst_maxburst: same as src_maxburst but for destination target
 * mutatis mutandis.
 * @src_port_window_size: The length of the register area in words the data need
 * to be accessed on the device side. It is only used for devices which is using
 * an area instead of a single register to receive the data. Typically the DMA
 * loops in this area in order to transfer the data.
 * @dst_port_window_size: same as src_port_window_size but for the destination
 * port.
 * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill
 * with 'true' if peripheral should be flow controller. Direction will be
 * selected at Runtime.
 * @slave_id: Slave requester id. Only valid for slave channels. The dma
 * slave peripheral will have unique id as dma requester which need to be
 * pass as slave config.
 *
 * This struct is passed in as configuration data to a DMA engine
 * in order to set up a certain channel for DMA transport at runtime.
 * The DMA device/engine has to provide support for an additional
 * callback in the dma_device structure, device_config and this struct
 * will then be passed in as an argument to the function.
 *
 * The rationale for adding configuration information to this struct is as
 * follows: if it is likely that more than one DMA slave controllers in
 * the world will support the configuration option, then make it generic.
 * If not: if it is fixed so that it be sent in static from the platform
 * data, then prefer to do that.
 */
struct dma_slave_config {
        enum dma_transfer_direction direction;
        phys_addr_t src_addr;
        phys_addr_t dst_addr;
        enum dma_slave_buswidth src_addr_width;
        enum dma_slave_buswidth dst_addr_width;
        u32 src_maxburst;
        u32 dst_maxburst;
        u32 src_port_window_size;
        u32 dst_port_window_size;
        bool device_fc;
        unsigned int slave_id;
};

/**
 * enum dma_residue_granularity - Granularity of the reported transfer residue
 * @DMA_RESIDUE_GRANULARITY_DESCRIPTOR: Residue reporting is not support. The
 *  DMA channel is only able to tell whether a descriptor has been completed or
 *  not, which means residue reporting is not supported by this channel. The
 *  residue field of the dma_tx_state field will always be 0.
 * @DMA_RESIDUE_GRANULARITY_SEGMENT: Residue is updated after each successfully
 *  completed segment of the transfer (For cyclic transfers this is after each
 *  period). This is typically implemented by having the hardware generate an
 *  interrupt after each transferred segment and then the drivers updates the
 *  outstanding residue by the size of the segment. Another possibility is if
 *  the hardware supports scatter-gather and the segment descriptor has a field
 *  which gets set after the segment has been completed. The driver then counts
 *  the number of segments without the flag set to compute the residue.
 * @DMA_RESIDUE_GRANULARITY_BURST: Residue is updated after each transferred
 *  burst. This is typically only supported if the hardware has a progress
 *  register of some sort (E.g. a register with the current read/write address
 *  or a register with the amount of bursts/beats/bytes that have been
 *  transferred or still need to be transferred).
 */
enum dma_residue_granularity {
        DMA_RESIDUE_GRANULARITY_DESCRIPTOR = 0,
        DMA_RESIDUE_GRANULARITY_SEGMENT = 1,
        DMA_RESIDUE_GRANULARITY_BURST = 2,
};

/**
 * struct dma_slave_caps - expose capabilities of a slave channel only
 * @src_addr_widths: bit mask of src addr widths the channel supports.
 *      Width is specified in bytes, e.g. for a channel supporting
 *      a width of 4 the mask should have BIT(4) set.
 * @dst_addr_widths: bit mask of dst addr widths the channel supports
 * @directions: bit mask of slave directions the channel supports.
 *      Since the enum dma_transfer_direction is not defined as bit flag for
 *      each type, the dma controller should set BIT(<TYPE>) and same
 *      should be checked by controller as well
 * @max_burst: max burst capability per-transfer
 * @cmd_pause: true, if pause is supported (i.e. for reading residue or
 *             for resume later)
 * @cmd_resume: true, if resume is supported
 * @cmd_terminate: true, if terminate cmd is supported
 * @residue_granularity: granularity of the reported transfer residue
 * @descriptor_reuse: if a descriptor can be reused by client and
 * resubmitted multiple times
 */
struct dma_slave_caps {
        u32 src_addr_widths;
        u32 dst_addr_widths;
        u32 directions;
        u32 max_burst;
        bool cmd_pause;
        bool cmd_resume;
        bool cmd_terminate;
        enum dma_residue_granularity residue_granularity;
        bool descriptor_reuse;
};

static inline const char *dma_chan_name(struct dma_chan *chan)
{
        return dev_name(&chan->dev->device);
}

void dma_chan_cleanup(struct kref *kref);

/**
 * typedef dma_filter_fn - callback filter for dma_request_channel
 * @chan: channel to be reviewed
 * @filter_param: opaque parameter passed through dma_request_channel
 *
 * When this optional parameter is specified in a call to dma_request_channel a
 * suitable channel is passed to this routine for further dispositioning before
 * being returned.  Where 'suitable' indicates a non-busy channel that
 * satisfies the given capability mask.  It returns 'true' to indicate that the
 * channel is suitable.
 */
typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);

typedef void (*dma_async_tx_callback)(void *dma_async_param);

enum dmaengine_tx_result {
        DMA_TRANS_NOERROR = 0,          /* SUCCESS */
        DMA_TRANS_READ_FAILED,          /* Source DMA read failed */
        DMA_TRANS_WRITE_FAILED,         /* Destination DMA write failed */
        DMA_TRANS_ABORTED,              /* Op never submitted / aborted */
};

struct dmaengine_result {
        enum dmaengine_tx_result result;
        u32 residue;
};

typedef void (*dma_async_tx_callback_result)(void *dma_async_param,
                                const struct dmaengine_result *result);

struct dmaengine_unmap_data {
#if IS_ENABLED(CONFIG_DMA_ENGINE_RAID)
        u16 map_cnt;
#else
        u8 map_cnt;
#endif
        u8 to_cnt;
        u8 from_cnt;
        u8 bidi_cnt;
        struct device *dev;
        struct kref kref;
        size_t len;
        dma_addr_t addr[0];
};

/**
 * struct dma_async_tx_descriptor - async transaction descriptor
 * ---dma generic offload fields---
 * @cookie: tracking cookie for this transaction, set to -EBUSY if
 *      this tx is sitting on a dependency list
 * @flags: flags to augment operation preparation, control completion, and
 *      communicate status
 * @phys: physical address of the descriptor
 * @chan: target channel for this operation
 * @tx_submit: accept the descriptor, assign ordered cookie and mark the
 * descriptor pending. To be pushed on .issue_pending() call
 * @callback: routine to call after this operation is complete
 * @callback_param: general parameter to pass to the callback routine
 * ---async_tx api specific fields---
 * @next: at completion submit this descriptor
 * @parent: pointer to the next level up in the dependency chain
 * @lock: protect the parent and next pointers
 */
struct dma_async_tx_descriptor {
        dma_cookie_t cookie;
        enum dma_ctrl_flags flags; /* not a 'long' to pack with cookie */
        dma_addr_t phys;
        struct dma_chan *chan;
        dma_cookie_t (*tx_submit)(struct dma_async_tx_descriptor *tx);
        int (*desc_free)(struct dma_async_tx_descriptor *tx);
        dma_async_tx_callback callback;
        dma_async_tx_callback_result callback_result;
        void *callback_param;
        struct dmaengine_unmap_data *unmap;
#ifdef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
        struct dma_async_tx_descriptor *next;
        struct dma_async_tx_descriptor *parent;
        spinlock_t lock;
#endif
};

#ifdef CONFIG_DMA_ENGINE
static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx,
                                 struct dmaengine_unmap_data *unmap)
{
        kref_get(&unmap->kref);
        tx->unmap = unmap;
}

struct dmaengine_unmap_data *
dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags);
void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap);
#else
static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx,
                                 struct dmaengine_unmap_data *unmap)
{
}
static inline struct dmaengine_unmap_data *
dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags)
{
        return NULL;
}
static inline void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap)
{
}
#endif

static inline void dma_descriptor_unmap(struct dma_async_tx_descriptor *tx)
{
        if (tx->unmap) {
                dmaengine_unmap_put(tx->unmap);
                tx->unmap = NULL;
        }
}

#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
static inline void txd_lock(struct dma_async_tx_descriptor *txd)
{
}
static inline void txd_unlock(struct dma_async_tx_descriptor *txd)
{
}
static inline void txd_chain(struct dma_async_tx_descriptor *txd, struct dma_async_tx_descriptor *next)
{
        BUG();
}
static inline void txd_clear_parent(struct dma_async_tx_descriptor *txd)
{
}
static inline void txd_clear_next(struct dma_async_tx_descriptor *txd)
{
}
static inline struct dma_async_tx_descriptor *txd_next(struct dma_async_tx_descriptor *txd)
{
        return NULL;
}
static inline struct dma_async_tx_descriptor *txd_parent(struct dma_async_tx_descriptor *txd)
{
        return NULL;
}

#else
static inline void txd_lock(struct dma_async_tx_descriptor *txd)
{
        spin_lock_bh(&txd->lock);
}
static inline void txd_unlock(struct dma_async_tx_descriptor *txd)
{
        spin_unlock_bh(&txd->lock);
}
static inline void txd_chain(struct dma_async_tx_descriptor *txd, struct dma_async_tx_descriptor *next)
{
        txd->next = next;
        next->parent = txd;
}
static inline void txd_clear_parent(struct dma_async_tx_descriptor *txd)
{
        txd->parent = NULL;
}
static inline void txd_clear_next(struct dma_async_tx_descriptor *txd)
{
        txd->next = NULL;
}
static inline struct dma_async_tx_descriptor *txd_parent(struct dma_async_tx_descriptor *txd)
{
        return txd->parent;
}
static inline struct dma_async_tx_descriptor *txd_next(struct dma_async_tx_descriptor *txd)
{
        return txd->next;
}
#endif

/**
 * struct dma_tx_state - filled in to report the status of
 * a transfer.
 * @last: last completed DMA cookie
 * @used: last issued DMA cookie (i.e. the one in progress)
 * @residue: the remaining number of bytes left to transmit
 *      on the selected transfer for states DMA_IN_PROGRESS and
 *      DMA_PAUSED if this is implemented in the driver, else 0
 */
struct dma_tx_state {
        dma_cookie_t last;
        dma_cookie_t used;
        u32 residue;
};

/**
 * enum dmaengine_alignment - defines alignment of the DMA async tx
 * buffers
 */
enum dmaengine_alignment {
        DMAENGINE_ALIGN_1_BYTE = 0,
        DMAENGINE_ALIGN_2_BYTES = 1,
        DMAENGINE_ALIGN_4_BYTES = 2,
        DMAENGINE_ALIGN_8_BYTES = 3,
        DMAENGINE_ALIGN_16_BYTES = 4,
        DMAENGINE_ALIGN_32_BYTES = 5,
        DMAENGINE_ALIGN_64_BYTES = 6,
};

/**
 * struct dma_slave_map - associates slave device and it's slave channel with
 * parameter to be used by a filter function
 * @devname: name of the device
 * @slave: slave channel name
 * @param: opaque parameter to pass to struct dma_filter.fn
 */
struct dma_slave_map {
        const char *devname;
        const char *slave;
        void *param;
};

/**
 * struct dma_filter - information for slave device/channel to filter_fn/param
 * mapping
 * @fn: filter function callback
 * @mapcnt: number of slave device/channel in the map
 * @map: array of channel to filter mapping data
 */
struct dma_filter {
        dma_filter_fn fn;
        int mapcnt;
        const struct dma_slave_map *map;
};

/**
 * struct dma_device - info on the entity supplying DMA services
 * @chancnt: how many DMA channels are supported
 * @privatecnt: how many DMA channels are requested by dma_request_channel
 * @channels: the list of struct dma_chan
 * @global_node: list_head for global dma_device_list
 * @filter: information for device/slave to filter function/param mapping
 * @cap_mask: one or more dma_capability flags
 * @max_xor: maximum number of xor sources, 0 if no capability
 * @max_pq: maximum number of PQ sources and PQ-continue capability
 * @copy_align: alignment shift for memcpy operations
 * @xor_align: alignment shift for xor operations
 * @pq_align: alignment shift for pq operations
 * @fill_align: alignment shift for memset operations
 * @dev_id: unique device ID
 * @dev: struct device reference for dma mapping api
 * @owner: owner module (automatically set based on the provided dev)
 * @src_addr_widths: bit mask of src addr widths the device supports
 *      Width is specified in bytes, e.g. for a device supporting
 *      a width of 4 the mask should have BIT(4) set.
 * @dst_addr_widths: bit mask of dst addr widths the device supports
 * @directions: bit mask of slave directions the device supports.
 *      Since the enum dma_transfer_direction is not defined as bit flag for
 *      each type, the dma controller should set BIT(<TYPE>) and same
 *      should be checked by controller as well
 * @max_burst: max burst capability per-transfer
 * @residue_granularity: granularity of the transfer residue reported
 *      by tx_status
 * @device_alloc_chan_resources: allocate resources and return the
 *      number of allocated descriptors
 * @device_free_chan_resources: release DMA channel's resources
 * @device_prep_dma_memcpy: prepares a memcpy operation
 * @device_prep_dma_xor: prepares a xor operation
 * @device_prep_dma_xor_val: prepares a xor validation operation
 * @device_prep_dma_pq: prepares a pq operation
 * @device_prep_dma_pq_val: prepares a pqzero_sum operation
 * @device_prep_dma_memset: prepares a memset operation
 * @device_prep_dma_memset_sg: prepares a memset operation over a scatter list
 * @device_prep_dma_interrupt: prepares an end of chain interrupt operation
 * @device_prep_slave_sg: prepares a slave dma operation
 * @device_prep_dma_cyclic: prepare a cyclic dma operation suitable for audio.
 *      The function takes a buffer of size buf_len. The callback function will
 *      be called after period_len bytes have been transferred.
 * @device_prep_interleaved_dma: Transfer expression in a generic way.
 * @device_prep_dma_imm_data: DMA's 8 byte immediate data to the dst address
 * @device_config: Pushes a new configuration to a channel, return 0 or an error
 *      code
 * @device_pause: Pauses any transfer happening on a channel. Returns
 *      0 or an error code
 * @device_resume: Resumes any transfer on a channel previously
 *      paused. Returns 0 or an error code
 * @device_terminate_all: Aborts all transfers on a channel. Returns 0
 *      or an error code
 * @device_synchronize: Synchronizes the termination of a transfers to the
 *  current context.
 * @device_tx_status: poll for transaction completion, the optional
 *      txstate parameter can be supplied with a pointer to get a
 *      struct with auxiliary transfer status information, otherwise the call
 *      will just return a simple status code
 * @device_issue_pending: push pending transactions to hardware
 * @descriptor_reuse: a submitted transfer can be resubmitted after completion
 */
struct dma_device {

        unsigned int chancnt;
        unsigned int privatecnt;
        struct list_head channels;
        struct list_head global_node;
        struct dma_filter filter;
        dma_cap_mask_t  cap_mask;
        unsigned short max_xor;
        unsigned short max_pq;
        enum dmaengine_alignment copy_align;
        enum dmaengine_alignment xor_align;
        enum dmaengine_alignment pq_align;
        enum dmaengine_alignment fill_align;
        #define DMA_HAS_PQ_CONTINUE (1 << 15)

        int dev_id;
        struct device *dev;
        struct module *owner;

        u32 src_addr_widths;
        u32 dst_addr_widths;
        u32 directions;
        u32 max_burst;
        bool descriptor_reuse;
        enum dma_residue_granularity residue_granularity;

        int (*device_alloc_chan_resources)(struct dma_chan *chan);
        void (*device_free_chan_resources)(struct dma_chan *chan);

        struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
                struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
                size_t len, unsigned long flags);
        struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
                struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src,
                unsigned int src_cnt, size_t len, unsigned long flags);
        struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)(
                struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt,
                size_t len, enum sum_check_flags *result, unsigned long flags);
        struct dma_async_tx_descriptor *(*device_prep_dma_pq)(
                struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
                unsigned int src_cnt, const unsigned char *scf,
                size_t len, unsigned long flags);
        struct dma_async_tx_descriptor *(*device_prep_dma_pq_val)(
                struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
                unsigned int src_cnt, const unsigned char *scf, size_t len,
                enum sum_check_flags *pqres, unsigned long flags);
        struct dma_async_tx_descriptor *(*device_prep_dma_memset)(
                struct dma_chan *chan, dma_addr_t dest, int value, size_t len,
                unsigned long flags);
        struct dma_async_tx_descriptor *(*device_prep_dma_memset_sg)(
                struct dma_chan *chan, struct scatterlist *sg,
                unsigned int nents, int value, unsigned long flags);
        struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)(
                struct dma_chan *chan, unsigned long flags);

        struct dma_async_tx_descriptor *(*device_prep_slave_sg)(
                struct dma_chan *chan, struct scatterlist *sgl,
                unsigned int sg_len, enum dma_transfer_direction direction,
                unsigned long flags, void *context);
        struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)(
                struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
                size_t period_len, enum dma_transfer_direction direction,
                unsigned long flags);
        struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
                struct dma_chan *chan, struct dma_interleaved_template *xt,
                unsigned long flags);
        struct dma_async_tx_descriptor *(*device_prep_dma_imm_data)(
                struct dma_chan *chan, dma_addr_t dst, u64 data,
                unsigned long flags);

        int (*device_config)(struct dma_chan *chan,
                             struct dma_slave_config *config);
        int (*device_pause)(struct dma_chan *chan);
        int (*device_resume)(struct dma_chan *chan);
        int (*device_terminate_all)(struct dma_chan *chan);
        void (*device_synchronize)(struct dma_chan *chan);

        enum dma_status (*device_tx_status)(struct dma_chan *chan,
                                            dma_cookie_t cookie,
                                            struct dma_tx_state *txstate);
        void (*device_issue_pending)(struct dma_chan *chan);
};

static inline int dmaengine_slave_config(struct dma_chan *chan,
                                          struct dma_slave_config *config)
{
        if (chan->device->device_config)
                return chan->device->device_config(chan, config);

        return -ENOSYS;
}

static inline bool is_slave_direction(enum dma_transfer_direction direction)
{
        return (direction == DMA_MEM_TO_DEV) || (direction == DMA_DEV_TO_MEM);
}

static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
        struct dma_chan *chan, dma_addr_t buf, size_t len,
        enum dma_transfer_direction dir, unsigned long flags)
{
        struct scatterlist sg;
        sg_init_table(&sg, 1);
        sg_dma_address(&sg) = buf;
        sg_dma_len(&sg) = len;

        if (!chan || !chan->device || !chan->device->device_prep_slave_sg)
                return NULL;

        return chan->device->device_prep_slave_sg(chan, &sg, 1,
                                                  dir, flags, NULL);
}

static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
        struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
        enum dma_transfer_direction dir, unsigned long flags)
{
        if (!chan || !chan->device || !chan->device->device_prep_slave_sg)
                return NULL;

        return chan->device->device_prep_slave_sg(chan, sgl, sg_len,
                                                  dir, flags, NULL);
}

#ifdef CONFIG_RAPIDIO_DMA_ENGINE
struct rio_dma_ext;
static inline struct dma_async_tx_descriptor *dmaengine_prep_rio_sg(
        struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
        enum dma_transfer_direction dir, unsigned long flags,
        struct rio_dma_ext *rio_ext)
{
        if (!chan || !chan->device || !chan->device->device_prep_slave_sg)
                return NULL;

        return chan->device->device_prep_slave_sg(chan, sgl, sg_len,
                                                  dir, flags, rio_ext);
}
#endif

static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
                struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
                size_t period_len, enum dma_transfer_direction dir,
                unsigned long flags)
{
        if (!chan || !chan->device || !chan->device->device_prep_dma_cyclic)
                return NULL;

        return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len,
                                                period_len, dir, flags);
}

static inline struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
                struct dma_chan *chan, struct dma_interleaved_template *xt,
                unsigned long flags)
{
        if (!chan || !chan->device || !chan->device->device_prep_interleaved_dma)
                return NULL;

        return chan->device->device_prep_interleaved_dma(chan, xt, flags);
}

static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memset(
                struct dma_chan *chan, dma_addr_t dest, int value, size_t len,
                unsigned long flags)
{
        if (!chan || !chan->device || !chan->device->device_prep_dma_memset)
                return NULL;

        return chan->device->device_prep_dma_memset(chan, dest, value,
                                                    len, flags);
}

static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy(
                struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
                size_t len, unsigned long flags)
{
        if (!chan || !chan->device || !chan->device->device_prep_dma_memcpy)
                return NULL;

        return chan->device->device_prep_dma_memcpy(chan, dest, src,
                                                    len, flags);
}

/**
 * dmaengine_terminate_all() - Terminate all active DMA transfers
 * @chan: The channel for which to terminate the transfers
 *
 * This function is DEPRECATED use either dmaengine_terminate_sync() or
 * dmaengine_terminate_async() instead.
 */
static inline int dmaengine_terminate_all(struct dma_chan *chan)
{
        if (chan->device->device_terminate_all)
                return chan->device->device_terminate_all(chan);

        return -ENOSYS;
}

/**
 * dmaengine_terminate_async() - Terminate all active DMA transfers
 * @chan: The channel for which to terminate the transfers
 *
 * Calling this function will terminate all active and pending descriptors
 * that have previously been submitted to the channel. It is not guaranteed
 * though that the transfer for the active descriptor has stopped when the
 * function returns. Furthermore it is possible the complete callback of a
 * submitted transfer is still running when this function returns.
 *
 * dmaengine_synchronize() needs to be called before it is safe to free
 * any memory that is accessed by previously submitted descriptors or before
 * freeing any resources accessed from within the completion callback of any
 * perviously submitted descriptors.
 *
 * This function can be called from atomic context as well as from within a
 * complete callback of a descriptor submitted on the same channel.
 *
 * If none of the two conditions above apply consider using
 * dmaengine_terminate_sync() instead.
 */
static inline int dmaengine_terminate_async(struct dma_chan *chan)
{
        if (chan->device->device_terminate_all)
                return chan->device->device_terminate_all(chan);

        return -EINVAL;
}

/**
 * dmaengine_synchronize() - Synchronize DMA channel termination
 * @chan: The channel to synchronize
 *
 * Synchronizes to the DMA channel termination to the current context. When this
 * function returns it is guaranteed that all transfers for previously issued
 * descriptors have stopped and and it is safe to free the memory assoicated
 * with them. Furthermore it is guaranteed that all complete callback functions
 * for a previously submitted descriptor have finished running and it is safe to
 * free resources accessed from within the complete callbacks.
 *
 * The behavior of this function is undefined if dma_async_issue_pending() has
 * been called between dmaengine_terminate_async() and this function.
 *
 * This function must only be called from non-atomic context and must not be
 * called from within a complete callback of a descriptor submitted on the same
 * channel.
 */
static inline void dmaengine_synchronize(struct dma_chan *chan)
{
        might_sleep();

        if (chan->device->device_synchronize)
                chan->device->device_synchronize(chan);
}

/**
 * dmaengine_terminate_sync() - Terminate all active DMA transfers
 * @chan: The channel for which to terminate the transfers
 *
 * Calling this function will terminate all active and pending transfers
 * that have previously been submitted to the channel. It is similar to
 * dmaengine_terminate_async() but guarantees that the DMA transfer has actually
 * stopped and that all complete callbacks have finished running when the
 * function returns.
 *
 * This function must only be called from non-atomic context and must not be
 * called from within a complete callback of a descriptor submitted on the same
 * channel.
 */
static inline int dmaengine_terminate_sync(struct dma_chan *chan)
{
        int ret;

        ret = dmaengine_terminate_async(chan);
        if (ret)
                return ret;

        dmaengine_synchronize(chan);

        return 0;
}

static inline int dmaengine_pause(struct dma_chan *chan)
{
        if (chan->device->device_pause)
                return chan->device->device_pause(chan);

        return -ENOSYS;
}

static inline int dmaengine_resume(struct dma_chan *chan)
{
        if (chan->device->device_resume)
                return chan->device->device_resume(chan);

        return -ENOSYS;
}

static inline enum dma_status dmaengine_tx_status(struct dma_chan *chan,
        dma_cookie_t cookie, struct dma_tx_state *state)
{
        return chan->device->device_tx_status(chan, cookie, state);
}

static inline dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc)
{
        return desc->tx_submit(desc);
}

static inline bool dmaengine_check_align(enum dmaengine_alignment align,
                                         size_t off1, size_t off2, size_t len)
{
        size_t mask;

        if (!align)
                return true;
        mask = (1 << align) - 1;
        if (mask & (off1 | off2 | len))
                return false;
        return true;
}

static inline bool is_dma_copy_aligned(struct dma_device *dev, size_t off1,
                                       size_t off2, size_t len)
{
        return dmaengine_check_align(dev->copy_align, off1, off2, len);
}

static inline bool is_dma_xor_aligned(struct dma_device *dev, size_t off1,
                                      size_t off2, size_t len)
{
        return dmaengine_check_align(dev->xor_align, off1, off2, len);
}

static inline bool is_dma_pq_aligned(struct dma_device *dev, size_t off1,
                                     size_t off2, size_t len)
{
        return dmaengine_check_align(dev->pq_align, off1, off2, len);
}

static inline bool is_dma_fill_aligned(struct dma_device *dev, size_t off1,
                                       size_t off2, size_t len)
{
        return dmaengine_check_align(dev->fill_align, off1, off2, len);
}

static inline void
dma_set_maxpq(struct dma_device *dma, int maxpq, int has_pq_continue)
{
        dma->max_pq = maxpq;
        if (has_pq_continue)
                dma->max_pq |= DMA_HAS_PQ_CONTINUE;
}

static inline bool dmaf_continue(enum dma_ctrl_flags flags)
{
        return (flags & DMA_PREP_CONTINUE) == DMA_PREP_CONTINUE;
}

static inline bool dmaf_p_disabled_continue(enum dma_ctrl_flags flags)
{
        enum dma_ctrl_flags mask = DMA_PREP_CONTINUE | DMA_PREP_PQ_DISABLE_P;

        return (flags & mask) == mask;
}

static inline bool dma_dev_has_pq_continue(struct dma_device *dma)
{
        return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE;
}

static inline unsigned short dma_dev_to_maxpq(struct dma_device *dma)
{
        return dma->max_pq & ~DMA_HAS_PQ_CONTINUE;
}

/* dma_maxpq - reduce maxpq in the face of continued operations
 * @dma - dma device with PQ capability
 * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set
 *
 * When an engine does not support native continuation we need 3 extra
 * source slots to reuse P and Q with the following coefficients:
 * 1/ {00} * P : remove P from Q', but use it as a source for P'
 * 2/ {01} * Q : use Q to continue Q' calculation
 * 3/ {00} * Q : subtract Q from P' to cancel (2)
 *
 * In the case where P is disabled we only need 1 extra source:
 * 1/ {01} * Q : use Q to continue Q' calculation
 */
static inline int dma_maxpq(struct dma_device *dma, enum dma_ctrl_flags flags)
{
        if (dma_dev_has_pq_continue(dma) || !dmaf_continue(flags))
                return dma_dev_to_maxpq(dma);
        else if (dmaf_p_disabled_continue(flags))
                return dma_dev_to_maxpq(dma) - 1;
        else if (dmaf_continue(flags))
                return dma_dev_to_maxpq(dma) - 3;
        BUG();
}

static inline size_t dmaengine_get_icg(bool inc, bool sgl, size_t icg,
                                      size_t dir_icg)
{
        if (inc) {
                if (dir_icg)
                        return dir_icg;
                else if (sgl)
                        return icg;
        }

        return 0;
}

static inline size_t dmaengine_get_dst_icg(struct dma_interleaved_template *xt,
                                           struct data_chunk *chunk)
{
        return dmaengine_get_icg(xt->dst_inc, xt->dst_sgl,
                                 chunk->icg, chunk->dst_icg);
}

static inline size_t dmaengine_get_src_icg(struct dma_interleaved_template *xt,
                                           struct data_chunk *chunk)
{
        return dmaengine_get_icg(xt->src_inc, xt->src_sgl,
                                 chunk->icg, chunk->src_icg);
}

/* --- public DMA engine API --- */

#ifdef CONFIG_DMA_ENGINE
void dmaengine_get(void);
void dmaengine_put(void);
#else
static inline void dmaengine_get(void)
{
}
static inline void dmaengine_put(void)
{
}
#endif

#ifdef CONFIG_ASYNC_TX_DMA
#define async_dmaengine_get()   dmaengine_get()
#define async_dmaengine_put()   dmaengine_put()
#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
#define async_dma_find_channel(type) dma_find_channel(DMA_ASYNC_TX)
#else
#define async_dma_find_channel(type) dma_find_channel(type)
#endif /* CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH */
#else
static inline void async_dmaengine_get(void)
{
}
static inline void async_dmaengine_put(void)
{
}
static inline struct dma_chan *
async_dma_find_channel(enum dma_transaction_type type)
{
        return NULL;
}
#endif /* CONFIG_ASYNC_TX_DMA */
void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx,
                                  struct dma_chan *chan);

static inline void async_tx_ack(struct dma_async_tx_descriptor *tx)
{
        tx->flags |= DMA_CTRL_ACK;
}

static inline void async_tx_clear_ack(struct dma_async_tx_descriptor *tx)
{
        tx->flags &= ~DMA_CTRL_ACK;
}

static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx)
{
        return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK;
}

#define dma_cap_set(tx, mask) __dma_cap_set((tx), &(mask))
static inline void
__dma_cap_set(enum dma_transaction_type tx_type, dma_cap_mask_t *dstp)
{
        set_bit(tx_type, dstp->bits);
}

#define dma_cap_clear(tx, mask) __dma_cap_clear((tx), &(mask))
static inline void
__dma_cap_clear(enum dma_transaction_type tx_type, dma_cap_mask_t *dstp)
{
        clear_bit(tx_type, dstp->bits);
}

#define dma_cap_zero(mask) __dma_cap_zero(&(mask))
static inline void __dma_cap_zero(dma_cap_mask_t *dstp)
{
        bitmap_zero(dstp->bits, DMA_TX_TYPE_END);
}

#define dma_has_cap(tx, mask) __dma_has_cap((tx), &(mask))
static inline int
__dma_has_cap(enum dma_transaction_type tx_type, dma_cap_mask_t *srcp)
{
        return test_bit(tx_type, srcp->bits);
}

#define for_each_dma_cap_mask(cap, mask) \
        for_each_set_bit(cap, mask.bits, DMA_TX_TYPE_END)

/**
 * dma_async_issue_pending - flush pending transactions to HW
 * @chan: target DMA channel
 *
 * This allows drivers to push copies to HW in batches,
 * reducing MMIO writes where possible.
 */
static inline void dma_async_issue_pending(struct dma_chan *chan)
{
        chan->device->device_issue_pending(chan);
}

/**
 * dma_async_is_tx_complete - poll for transaction completion
 * @chan: DMA channel
 * @cookie: transaction identifier to check status of
 * @last: returns last completed cookie, can be NULL
 * @used: returns last issued cookie, can be NULL
 *
 * If @last and @used are passed in, upon return they reflect the driver
 * internal state and can be used with dma_async_is_complete() to check
 * the status of multiple cookies without re-checking hardware state.
 */
static inline enum dma_status dma_async_is_tx_complete(struct dma_chan *chan,
        dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used)
{
        struct dma_tx_state state;
        enum dma_status status;

        status = chan->device->device_tx_status(chan, cookie, &state);
        if (last)
                *last = state.last;
        if (used)
                *used = state.used;
        return status;
}

/**
 * dma_async_is_complete - test a cookie against chan state
 * @cookie: transaction identifier to test status of
 * @last_complete: last know completed transaction
 * @last_used: last cookie value handed out
 *
 * dma_async_is_complete() is used in dma_async_is_tx_complete()
 * the test logic is separated for lightweight testing of multiple cookies
 */
static inline enum dma_status dma_async_is_complete(dma_cookie_t cookie,
                        dma_cookie_t last_complete, dma_cookie_t last_used)
{
        if (last_complete <= last_used) {
                if ((cookie <= last_complete) || (cookie > last_used))
                        return DMA_COMPLETE;
        } else {
                if ((cookie <= last_complete) && (cookie > last_used))
                        return DMA_COMPLETE;
        }
        return DMA_IN_PROGRESS;
}

static inline void
dma_set_tx_state(struct dma_tx_state *st, dma_cookie_t last, dma_cookie_t used, u32 residue)
{
        if (st) {
                st->last = last;
                st->used = used;
                st->residue = residue;
        }
}

#ifdef CONFIG_DMA_ENGINE
struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie);
enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
void dma_issue_pending_all(void);
struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask,
                                       dma_filter_fn fn, void *fn_param,
                                       struct device_node *np);
struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name);

struct dma_chan *dma_request_chan(struct device *dev, const char *name);
struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask);

void dma_release_channel(struct dma_chan *chan);
int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps);
#else
static inline struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type)
{
        return NULL;
}
static inline enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie)
{
        return DMA_COMPLETE;
}
static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
{
        return DMA_COMPLETE;
}
static inline void dma_issue_pending_all(void)
{
}
static inline struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask,
                                                     dma_filter_fn fn,
                                                     void *fn_param,
                                                     struct device_node *np)
{
        return NULL;
}
static inline struct dma_chan *dma_request_slave_channel(struct device *dev,
                                                         const char *name)
{
        return NULL;
}
static inline struct dma_chan *dma_request_chan(struct device *dev,
                                                const char *name)
{
        return ERR_PTR(-ENODEV);
}
static inline struct dma_chan *dma_request_chan_by_mask(
                                                const dma_cap_mask_t *mask)
{
        return ERR_PTR(-ENODEV);
}
static inline void dma_release_channel(struct dma_chan *chan)
{
}
static inline int dma_get_slave_caps(struct dma_chan *chan,
                                     struct dma_slave_caps *caps)
{
        return -ENXIO;
}
#endif

#define dma_request_slave_channel_reason(dev, name) dma_request_chan(dev, name)

static inline int dmaengine_desc_set_reuse(struct dma_async_tx_descriptor *tx)
{
        struct dma_slave_caps caps;
        int ret;

        ret = dma_get_slave_caps(tx->chan, &caps);
        if (ret)
                return ret;

        if (caps.descriptor_reuse) {
                tx->flags |= DMA_CTRL_REUSE;
                return 0;
        } else {
                return -EPERM;
        }
}

static inline void dmaengine_desc_clear_reuse(struct dma_async_tx_descriptor *tx)
{
        tx->flags &= ~DMA_CTRL_REUSE;
}

static inline bool dmaengine_desc_test_reuse(struct dma_async_tx_descriptor *tx)
{
        return (tx->flags & DMA_CTRL_REUSE) == DMA_CTRL_REUSE;
}

static inline int dmaengine_desc_free(struct dma_async_tx_descriptor *desc)
{
        /* this is supported for reusable desc, so check that */
        if (dmaengine_desc_test_reuse(desc))
                return desc->desc_free(desc);
        else
                return -EPERM;
}

/* --- DMA device --- */

int dma_async_device_register(struct dma_device *device);
int dmaenginem_async_device_register(struct dma_device *device);
void dma_async_device_unregister(struct dma_device *device);
void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
struct dma_chan *dma_get_any_slave_channel(struct dma_device *device);
#define dma_request_channel(mask, x, y) \
        __dma_request_channel(&(mask), x, y, NULL)
#define dma_request_slave_channel_compat(mask, x, y, dev, name) \
        __dma_request_slave_channel_compat(&(mask), x, y, dev, name)

static inline struct dma_chan
*__dma_request_slave_channel_compat(const dma_cap_mask_t *mask,
                                  dma_filter_fn fn, void *fn_param,
                                  struct device *dev, const char *name)
{
        struct dma_chan *chan;

        chan = dma_request_slave_channel(dev, name);
        if (chan)
                return chan;

        if (!fn || !fn_param)
                return NULL;

        return __dma_request_channel(mask, fn, fn_param, NULL);
}
#endif /* DMAENGINE_H */