1 /* SPDX-License-Identifier: GPL-2.0-only */
3 * linux/include/linux/clk.h
5 * Copyright (C) 2004 ARM Limited.
6 * Written by Deep Blue Solutions Limited.
7 * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
12 #include <linux/err.h>
13 #include <linux/kernel.h>
14 #include <linux/notifier.h>
19 struct of_phandle_args;
22 * DOC: clk notifier callback types
24 * PRE_RATE_CHANGE - called immediately before the clk rate is changed,
25 * to indicate that the rate change will proceed. Drivers must
26 * immediately terminate any operations that will be affected by the
27 * rate change. Callbacks may either return NOTIFY_DONE, NOTIFY_OK,
28 * NOTIFY_STOP or NOTIFY_BAD.
30 * ABORT_RATE_CHANGE: called if the rate change failed for some reason
31 * after PRE_RATE_CHANGE. In this case, all registered notifiers on
32 * the clk will be called with ABORT_RATE_CHANGE. Callbacks must
33 * always return NOTIFY_DONE or NOTIFY_OK.
35 * POST_RATE_CHANGE - called after the clk rate change has successfully
36 * completed. Callbacks must always return NOTIFY_DONE or NOTIFY_OK.
39 #define PRE_RATE_CHANGE BIT(0)
40 #define POST_RATE_CHANGE BIT(1)
41 #define ABORT_RATE_CHANGE BIT(2)
44 * struct clk_notifier - associate a clk with a notifier
45 * @clk: struct clk * to associate the notifier with
46 * @notifier_head: a blocking_notifier_head for this clk
47 * @node: linked list pointers
49 * A list of struct clk_notifier is maintained by the notifier code.
50 * An entry is created whenever code registers the first notifier on a
51 * particular @clk. Future notifiers on that @clk are added to the
56 struct srcu_notifier_head notifier_head;
57 struct list_head node;
61 * struct clk_notifier_data - rate data to pass to the notifier callback
62 * @clk: struct clk * being changed
63 * @old_rate: previous rate of this clk
64 * @new_rate: new rate of this clk
66 * For a pre-notifier, old_rate is the clk's rate before this rate
67 * change, and new_rate is what the rate will be in the future. For a
68 * post-notifier, old_rate and new_rate are both set to the clk's
69 * current rate (this was done to optimize the implementation).
71 struct clk_notifier_data {
73 unsigned long old_rate;
74 unsigned long new_rate;
78 * struct clk_bulk_data - Data used for bulk clk operations.
80 * @id: clock consumer ID
81 * @clk: struct clk * to store the associated clock
83 * The CLK APIs provide a series of clk_bulk_() API calls as
84 * a convenience to consumers which require multiple clks. This
85 * structure is used to manage data for these calls.
87 struct clk_bulk_data {
92 #ifdef CONFIG_COMMON_CLK
95 * clk_notifier_register: register a clock rate-change notifier callback
96 * @clk: clock whose rate we are interested in
97 * @nb: notifier block with callback function pointer
99 * ProTip: debugging across notifier chains can be frustrating. Make sure that
100 * your notifier callback function prints a nice big warning in case of
103 int clk_notifier_register(struct clk *clk, struct notifier_block *nb);
106 * clk_notifier_unregister: unregister a clock rate-change notifier callback
107 * @clk: clock whose rate we are no longer interested in
108 * @nb: notifier block which will be unregistered
110 int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
113 * clk_get_accuracy - obtain the clock accuracy in ppb (parts per billion)
114 * for a clock source.
117 * This gets the clock source accuracy expressed in ppb.
118 * A perfect clock returns 0.
120 long clk_get_accuracy(struct clk *clk);
123 * clk_set_phase - adjust the phase shift of a clock signal
124 * @clk: clock signal source
125 * @degrees: number of degrees the signal is shifted
127 * Shifts the phase of a clock signal by the specified degrees. Returns 0 on
128 * success, -EERROR otherwise.
130 int clk_set_phase(struct clk *clk, int degrees);
133 * clk_get_phase - return the phase shift of a clock signal
134 * @clk: clock signal source
136 * Returns the phase shift of a clock node in degrees, otherwise returns
139 int clk_get_phase(struct clk *clk);
142 * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal
143 * @clk: clock signal source
144 * @num: numerator of the duty cycle ratio to be applied
145 * @den: denominator of the duty cycle ratio to be applied
147 * Adjust the duty cycle of a clock signal by the specified ratio. Returns 0 on
148 * success, -EERROR otherwise.
150 int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den);
153 * clk_get_duty_cycle - return the duty cycle ratio of a clock signal
154 * @clk: clock signal source
155 * @scale: scaling factor to be applied to represent the ratio as an integer
157 * Returns the duty cycle ratio multiplied by the scale provided, otherwise
160 int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale);
163 * clk_is_match - check if two clk's point to the same hardware clock
164 * @p: clk compared against q
165 * @q: clk compared against p
167 * Returns true if the two struct clk pointers both point to the same hardware
168 * clock node. Put differently, returns true if @p and @q
169 * share the same &struct clk_core object.
171 * Returns false otherwise. Note that two NULL clks are treated as matching.
173 bool clk_is_match(const struct clk *p, const struct clk *q);
176 * clk_rate_exclusive_get - get exclusivity over the rate control of a
180 * This function allows drivers to get exclusive control over the rate of a
181 * provider. It prevents any other consumer to execute, even indirectly,
182 * opereation which could alter the rate of the provider or cause glitches
184 * If exlusivity is claimed more than once on clock, even by the same driver,
185 * the rate effectively gets locked as exclusivity can't be preempted.
187 * Must not be called from within atomic context.
189 * Returns success (0) or negative errno.
191 int clk_rate_exclusive_get(struct clk *clk);
194 * clk_rate_exclusive_put - release exclusivity over the rate control of a
198 * This function allows drivers to release the exclusivity it previously got
199 * from clk_rate_exclusive_get()
201 * The caller must balance the number of clk_rate_exclusive_get() and
202 * clk_rate_exclusive_put() calls.
204 * Must not be called from within atomic context.
206 void clk_rate_exclusive_put(struct clk *clk);
210 static inline int clk_notifier_register(struct clk *clk,
211 struct notifier_block *nb)
216 static inline int clk_notifier_unregister(struct clk *clk,
217 struct notifier_block *nb)
222 static inline long clk_get_accuracy(struct clk *clk)
227 static inline long clk_set_phase(struct clk *clk, int phase)
232 static inline long clk_get_phase(struct clk *clk)
237 static inline int clk_set_duty_cycle(struct clk *clk, unsigned int num,
243 static inline unsigned int clk_get_scaled_duty_cycle(struct clk *clk,
249 static inline bool clk_is_match(const struct clk *p, const struct clk *q)
254 static inline int clk_rate_exclusive_get(struct clk *clk)
259 static inline void clk_rate_exclusive_put(struct clk *clk) {}
264 * clk_prepare - prepare a clock source
267 * This prepares the clock source for use.
269 * Must not be called from within atomic context.
271 #ifdef CONFIG_HAVE_CLK_PREPARE
272 int clk_prepare(struct clk *clk);
273 int __must_check clk_bulk_prepare(int num_clks,
274 const struct clk_bulk_data *clks);
276 static inline int clk_prepare(struct clk *clk)
282 static inline int __must_check
283 clk_bulk_prepare(int num_clks, const struct clk_bulk_data *clks)
291 * clk_unprepare - undo preparation of a clock source
294 * This undoes a previously prepared clock. The caller must balance
295 * the number of prepare and unprepare calls.
297 * Must not be called from within atomic context.
299 #ifdef CONFIG_HAVE_CLK_PREPARE
300 void clk_unprepare(struct clk *clk);
301 void clk_bulk_unprepare(int num_clks, const struct clk_bulk_data *clks);
303 static inline void clk_unprepare(struct clk *clk)
307 static inline void clk_bulk_unprepare(int num_clks,
308 const struct clk_bulk_data *clks)
314 #ifdef CONFIG_HAVE_CLK
316 * clk_get - lookup and obtain a reference to a clock producer.
317 * @dev: device for clock "consumer"
318 * @id: clock consumer ID
320 * Returns a struct clk corresponding to the clock producer, or
321 * valid IS_ERR() condition containing errno. The implementation
322 * uses @dev and @id to determine the clock consumer, and thereby
323 * the clock producer. (IOW, @id may be identical strings, but
324 * clk_get may return different clock producers depending on @dev.)
326 * Drivers must assume that the clock source is not enabled.
328 * clk_get should not be called from within interrupt context.
330 struct clk *clk_get(struct device *dev, const char *id);
333 * clk_bulk_get - lookup and obtain a number of references to clock producer.
334 * @dev: device for clock "consumer"
335 * @num_clks: the number of clk_bulk_data
336 * @clks: the clk_bulk_data table of consumer
338 * This helper function allows drivers to get several clk consumers in one
339 * operation. If any of the clk cannot be acquired then any clks
340 * that were obtained will be freed before returning to the caller.
342 * Returns 0 if all clocks specified in clk_bulk_data table are obtained
343 * successfully, or valid IS_ERR() condition containing errno.
344 * The implementation uses @dev and @clk_bulk_data.id to determine the
345 * clock consumer, and thereby the clock producer.
346 * The clock returned is stored in each @clk_bulk_data.clk field.
348 * Drivers must assume that the clock source is not enabled.
350 * clk_bulk_get should not be called from within interrupt context.
352 int __must_check clk_bulk_get(struct device *dev, int num_clks,
353 struct clk_bulk_data *clks);
355 * clk_bulk_get_all - lookup and obtain all available references to clock
357 * @dev: device for clock "consumer"
358 * @clks: pointer to the clk_bulk_data table of consumer
360 * This helper function allows drivers to get all clk consumers in one
361 * operation. If any of the clk cannot be acquired then any clks
362 * that were obtained will be freed before returning to the caller.
364 * Returns a positive value for the number of clocks obtained while the
365 * clock references are stored in the clk_bulk_data table in @clks field.
366 * Returns 0 if there're none and a negative value if something failed.
368 * Drivers must assume that the clock source is not enabled.
370 * clk_bulk_get should not be called from within interrupt context.
372 int __must_check clk_bulk_get_all(struct device *dev,
373 struct clk_bulk_data **clks);
376 * clk_bulk_get_optional - lookup and obtain a number of references to clock producer
377 * @dev: device for clock "consumer"
378 * @num_clks: the number of clk_bulk_data
379 * @clks: the clk_bulk_data table of consumer
381 * Behaves the same as clk_bulk_get() except where there is no clock producer.
382 * In this case, instead of returning -ENOENT, the function returns 0 and
383 * NULL for a clk for which a clock producer could not be determined.
385 int __must_check clk_bulk_get_optional(struct device *dev, int num_clks,
386 struct clk_bulk_data *clks);
388 * devm_clk_bulk_get - managed get multiple clk consumers
389 * @dev: device for clock "consumer"
390 * @num_clks: the number of clk_bulk_data
391 * @clks: the clk_bulk_data table of consumer
393 * Return 0 on success, an errno on failure.
395 * This helper function allows drivers to get several clk
396 * consumers in one operation with management, the clks will
397 * automatically be freed when the device is unbound.
399 int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
400 struct clk_bulk_data *clks);
402 * devm_clk_bulk_get_optional - managed get multiple optional consumer clocks
403 * @dev: device for clock "consumer"
404 * @num_clks: the number of clk_bulk_data
405 * @clks: pointer to the clk_bulk_data table of consumer
407 * Behaves the same as devm_clk_bulk_get() except where there is no clock
408 * producer. In this case, instead of returning -ENOENT, the function returns
409 * NULL for given clk. It is assumed all clocks in clk_bulk_data are optional.
411 * Returns 0 if all clocks specified in clk_bulk_data table are obtained
412 * successfully or for any clk there was no clk provider available, otherwise
413 * returns valid IS_ERR() condition containing errno.
414 * The implementation uses @dev and @clk_bulk_data.id to determine the
415 * clock consumer, and thereby the clock producer.
416 * The clock returned is stored in each @clk_bulk_data.clk field.
418 * Drivers must assume that the clock source is not enabled.
420 * clk_bulk_get should not be called from within interrupt context.
422 int __must_check devm_clk_bulk_get_optional(struct device *dev, int num_clks,
423 struct clk_bulk_data *clks);
425 * devm_clk_bulk_get_all - managed get multiple clk consumers
426 * @dev: device for clock "consumer"
427 * @clks: pointer to the clk_bulk_data table of consumer
429 * Returns a positive value for the number of clocks obtained while the
430 * clock references are stored in the clk_bulk_data table in @clks field.
431 * Returns 0 if there're none and a negative value if something failed.
433 * This helper function allows drivers to get several clk
434 * consumers in one operation with management, the clks will
435 * automatically be freed when the device is unbound.
438 int __must_check devm_clk_bulk_get_all(struct device *dev,
439 struct clk_bulk_data **clks);
442 * devm_clk_get - lookup and obtain a managed reference to a clock producer.
443 * @dev: device for clock "consumer"
444 * @id: clock consumer ID
446 * Returns a struct clk corresponding to the clock producer, or
447 * valid IS_ERR() condition containing errno. The implementation
448 * uses @dev and @id to determine the clock consumer, and thereby
449 * the clock producer. (IOW, @id may be identical strings, but
450 * clk_get may return different clock producers depending on @dev.)
452 * Drivers must assume that the clock source is not enabled.
454 * devm_clk_get should not be called from within interrupt context.
456 * The clock will automatically be freed when the device is unbound
459 struct clk *devm_clk_get(struct device *dev, const char *id);
462 * devm_clk_get_prepared - devm_clk_get() + clk_prepare()
463 * @dev: device for clock "consumer"
464 * @id: clock consumer ID
466 * Context: May sleep.
468 * Return: a struct clk corresponding to the clock producer, or
469 * valid IS_ERR() condition containing errno. The implementation
470 * uses @dev and @id to determine the clock consumer, and thereby
471 * the clock producer. (IOW, @id may be identical strings, but
472 * clk_get may return different clock producers depending on @dev.)
474 * The returned clk (if valid) is prepared. Drivers must however assume
475 * that the clock is not enabled.
477 * The clock will automatically be unprepared and freed when the device
478 * is unbound from the bus.
480 struct clk *devm_clk_get_prepared(struct device *dev, const char *id);
483 * devm_clk_get_enabled - devm_clk_get() + clk_prepare_enable()
484 * @dev: device for clock "consumer"
485 * @id: clock consumer ID
487 * Context: May sleep.
489 * Return: a struct clk corresponding to the clock producer, or
490 * valid IS_ERR() condition containing errno. The implementation
491 * uses @dev and @id to determine the clock consumer, and thereby
492 * the clock producer. (IOW, @id may be identical strings, but
493 * clk_get may return different clock producers depending on @dev.)
495 * The returned clk (if valid) is prepared and enabled.
497 * The clock will automatically be disabled, unprepared and freed
498 * when the device is unbound from the bus.
500 struct clk *devm_clk_get_enabled(struct device *dev, const char *id);
503 * devm_clk_get_optional - lookup and obtain a managed reference to an optional
505 * @dev: device for clock "consumer"
506 * @id: clock consumer ID
508 * Behaves the same as devm_clk_get() except where there is no clock producer.
509 * In this case, instead of returning -ENOENT, the function returns NULL.
511 struct clk *devm_clk_get_optional(struct device *dev, const char *id);
514 * devm_clk_get_optional_prepared - devm_clk_get_optional() + clk_prepare()
515 * @dev: device for clock "consumer"
516 * @id: clock consumer ID
518 * Context: May sleep.
520 * Return: a struct clk corresponding to the clock producer, or
521 * valid IS_ERR() condition containing errno. The implementation
522 * uses @dev and @id to determine the clock consumer, and thereby
523 * the clock producer. If no such clk is found, it returns NULL
524 * which serves as a dummy clk. That's the only difference compared
525 * to devm_clk_get_prepared().
527 * The returned clk (if valid) is prepared. Drivers must however
528 * assume that the clock is not enabled.
530 * The clock will automatically be unprepared and freed when the
531 * device is unbound from the bus.
533 struct clk *devm_clk_get_optional_prepared(struct device *dev, const char *id);
536 * devm_clk_get_optional_enabled - devm_clk_get_optional() +
537 * clk_prepare_enable()
538 * @dev: device for clock "consumer"
539 * @id: clock consumer ID
541 * Context: May sleep.
543 * Return: a struct clk corresponding to the clock producer, or
544 * valid IS_ERR() condition containing errno. The implementation
545 * uses @dev and @id to determine the clock consumer, and thereby
546 * the clock producer. If no such clk is found, it returns NULL
547 * which serves as a dummy clk. That's the only difference compared
548 * to devm_clk_get_enabled().
550 * The returned clk (if valid) is prepared and enabled.
552 * The clock will automatically be disabled, unprepared and freed
553 * when the device is unbound from the bus.
555 struct clk *devm_clk_get_optional_enabled(struct device *dev, const char *id);
558 * devm_get_clk_from_child - lookup and obtain a managed reference to a
559 * clock producer from child node.
560 * @dev: device for clock "consumer"
561 * @np: pointer to clock consumer node
562 * @con_id: clock consumer ID
564 * This function parses the clocks, and uses them to look up the
565 * struct clk from the registered list of clock providers by using
568 * The clock will automatically be freed when the device is unbound
571 struct clk *devm_get_clk_from_child(struct device *dev,
572 struct device_node *np, const char *con_id);
575 * clk_enable - inform the system when the clock source should be running.
578 * If the clock can not be enabled/disabled, this should return success.
580 * May be called from atomic contexts.
582 * Returns success (0) or negative errno.
584 int clk_enable(struct clk *clk);
587 * clk_bulk_enable - inform the system when the set of clks should be running.
588 * @num_clks: the number of clk_bulk_data
589 * @clks: the clk_bulk_data table of consumer
591 * May be called from atomic contexts.
593 * Returns success (0) or negative errno.
595 int __must_check clk_bulk_enable(int num_clks,
596 const struct clk_bulk_data *clks);
599 * clk_disable - inform the system when the clock source is no longer required.
602 * Inform the system that a clock source is no longer required by
603 * a driver and may be shut down.
605 * May be called from atomic contexts.
607 * Implementation detail: if the clock source is shared between
608 * multiple drivers, clk_enable() calls must be balanced by the
609 * same number of clk_disable() calls for the clock source to be
612 void clk_disable(struct clk *clk);
615 * clk_bulk_disable - inform the system when the set of clks is no
617 * @num_clks: the number of clk_bulk_data
618 * @clks: the clk_bulk_data table of consumer
620 * Inform the system that a set of clks is no longer required by
621 * a driver and may be shut down.
623 * May be called from atomic contexts.
625 * Implementation detail: if the set of clks is shared between
626 * multiple drivers, clk_bulk_enable() calls must be balanced by the
627 * same number of clk_bulk_disable() calls for the clock source to be
630 void clk_bulk_disable(int num_clks, const struct clk_bulk_data *clks);
633 * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
634 * This is only valid once the clock source has been enabled.
637 unsigned long clk_get_rate(struct clk *clk);
640 * clk_put - "free" the clock source
643 * Note: drivers must ensure that all clk_enable calls made on this
644 * clock source are balanced by clk_disable calls prior to calling
647 * clk_put should not be called from within interrupt context.
649 void clk_put(struct clk *clk);
652 * clk_bulk_put - "free" the clock source
653 * @num_clks: the number of clk_bulk_data
654 * @clks: the clk_bulk_data table of consumer
656 * Note: drivers must ensure that all clk_bulk_enable calls made on this
657 * clock source are balanced by clk_bulk_disable calls prior to calling
660 * clk_bulk_put should not be called from within interrupt context.
662 void clk_bulk_put(int num_clks, struct clk_bulk_data *clks);
665 * clk_bulk_put_all - "free" all the clock source
666 * @num_clks: the number of clk_bulk_data
667 * @clks: the clk_bulk_data table of consumer
669 * Note: drivers must ensure that all clk_bulk_enable calls made on this
670 * clock source are balanced by clk_bulk_disable calls prior to calling
673 * clk_bulk_put_all should not be called from within interrupt context.
675 void clk_bulk_put_all(int num_clks, struct clk_bulk_data *clks);
678 * devm_clk_put - "free" a managed clock source
679 * @dev: device used to acquire the clock
680 * @clk: clock source acquired with devm_clk_get()
682 * Note: drivers must ensure that all clk_enable calls made on this
683 * clock source are balanced by clk_disable calls prior to calling
686 * clk_put should not be called from within interrupt context.
688 void devm_clk_put(struct device *dev, struct clk *clk);
691 * The remaining APIs are optional for machine class support.
696 * clk_round_rate - adjust a rate to the exact rate a clock can provide
698 * @rate: desired clock rate in Hz
700 * This answers the question "if I were to pass @rate to clk_set_rate(),
701 * what clock rate would I end up with?" without changing the hardware
702 * in any way. In other words:
704 * rate = clk_round_rate(clk, r);
708 * clk_set_rate(clk, r);
709 * rate = clk_get_rate(clk);
711 * are equivalent except the former does not modify the clock hardware
714 * Returns rounded clock rate in Hz, or negative errno.
716 long clk_round_rate(struct clk *clk, unsigned long rate);
719 * clk_set_rate - set the clock rate for a clock source
721 * @rate: desired clock rate in Hz
723 * Updating the rate starts at the top-most affected clock and then
724 * walks the tree down to the bottom-most clock that needs updating.
726 * Returns success (0) or negative errno.
728 int clk_set_rate(struct clk *clk, unsigned long rate);
731 * clk_set_rate_exclusive- set the clock rate and claim exclusivity over
734 * @rate: desired clock rate in Hz
736 * This helper function allows drivers to atomically set the rate of a producer
737 * and claim exclusivity over the rate control of the producer.
739 * It is essentially a combination of clk_set_rate() and
740 * clk_rate_exclusite_get(). Caller must balance this call with a call to
741 * clk_rate_exclusive_put()
743 * Returns success (0) or negative errno.
745 int clk_set_rate_exclusive(struct clk *clk, unsigned long rate);
748 * clk_has_parent - check if a clock is a possible parent for another
750 * @parent: parent clock source
752 * This function can be used in drivers that need to check that a clock can be
753 * the parent of another without actually changing the parent.
755 * Returns true if @parent is a possible parent for @clk, false otherwise.
757 bool clk_has_parent(struct clk *clk, struct clk *parent);
760 * clk_set_rate_range - set a rate range for a clock source
762 * @min: desired minimum clock rate in Hz, inclusive
763 * @max: desired maximum clock rate in Hz, inclusive
765 * Returns success (0) or negative errno.
767 int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max);
770 * clk_set_min_rate - set a minimum clock rate for a clock source
772 * @rate: desired minimum clock rate in Hz, inclusive
774 * Returns success (0) or negative errno.
776 int clk_set_min_rate(struct clk *clk, unsigned long rate);
779 * clk_set_max_rate - set a maximum clock rate for a clock source
781 * @rate: desired maximum clock rate in Hz, inclusive
783 * Returns success (0) or negative errno.
785 int clk_set_max_rate(struct clk *clk, unsigned long rate);
788 * clk_set_parent - set the parent clock source for this clock
790 * @parent: parent clock source
792 * Returns success (0) or negative errno.
794 int clk_set_parent(struct clk *clk, struct clk *parent);
797 * clk_get_parent - get the parent clock source for this clock
800 * Returns struct clk corresponding to parent clock source, or
801 * valid IS_ERR() condition containing errno.
803 struct clk *clk_get_parent(struct clk *clk);
806 * clk_get_sys - get a clock based upon the device name
807 * @dev_id: device name
808 * @con_id: connection ID
810 * Returns a struct clk corresponding to the clock producer, or
811 * valid IS_ERR() condition containing errno. The implementation
812 * uses @dev_id and @con_id to determine the clock consumer, and
813 * thereby the clock producer. In contrast to clk_get() this function
814 * takes the device name instead of the device itself for identification.
816 * Drivers must assume that the clock source is not enabled.
818 * clk_get_sys should not be called from within interrupt context.
820 struct clk *clk_get_sys(const char *dev_id, const char *con_id);
823 * clk_save_context - save clock context for poweroff
825 * Saves the context of the clock register for powerstates in which the
826 * contents of the registers will be lost. Occurs deep within the suspend
827 * code so locking is not necessary.
829 int clk_save_context(void);
832 * clk_restore_context - restore clock context after poweroff
834 * This occurs with all clocks enabled. Occurs deep within the resume code
835 * so locking is not necessary.
837 void clk_restore_context(void);
839 #else /* !CONFIG_HAVE_CLK */
841 static inline struct clk *clk_get(struct device *dev, const char *id)
846 static inline int __must_check clk_bulk_get(struct device *dev, int num_clks,
847 struct clk_bulk_data *clks)
852 static inline int __must_check clk_bulk_get_optional(struct device *dev,
853 int num_clks, struct clk_bulk_data *clks)
858 static inline int __must_check clk_bulk_get_all(struct device *dev,
859 struct clk_bulk_data **clks)
864 static inline struct clk *devm_clk_get(struct device *dev, const char *id)
869 static inline struct clk *devm_clk_get_prepared(struct device *dev,
875 static inline struct clk *devm_clk_get_enabled(struct device *dev,
881 static inline struct clk *devm_clk_get_optional(struct device *dev,
887 static inline struct clk *devm_clk_get_optional_prepared(struct device *dev,
893 static inline struct clk *devm_clk_get_optional_enabled(struct device *dev,
899 static inline int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
900 struct clk_bulk_data *clks)
905 static inline int __must_check devm_clk_bulk_get_optional(struct device *dev,
906 int num_clks, struct clk_bulk_data *clks)
911 static inline int __must_check devm_clk_bulk_get_all(struct device *dev,
912 struct clk_bulk_data **clks)
918 static inline struct clk *devm_get_clk_from_child(struct device *dev,
919 struct device_node *np, const char *con_id)
924 static inline void clk_put(struct clk *clk) {}
926 static inline void clk_bulk_put(int num_clks, struct clk_bulk_data *clks) {}
928 static inline void clk_bulk_put_all(int num_clks, struct clk_bulk_data *clks) {}
930 static inline void devm_clk_put(struct device *dev, struct clk *clk) {}
932 static inline int clk_enable(struct clk *clk)
937 static inline int __must_check clk_bulk_enable(int num_clks,
938 const struct clk_bulk_data *clks)
943 static inline void clk_disable(struct clk *clk) {}
946 static inline void clk_bulk_disable(int num_clks,
947 const struct clk_bulk_data *clks) {}
949 static inline unsigned long clk_get_rate(struct clk *clk)
954 static inline int clk_set_rate(struct clk *clk, unsigned long rate)
959 static inline int clk_set_rate_exclusive(struct clk *clk, unsigned long rate)
964 static inline long clk_round_rate(struct clk *clk, unsigned long rate)
969 static inline bool clk_has_parent(struct clk *clk, struct clk *parent)
974 static inline int clk_set_rate_range(struct clk *clk, unsigned long min,
980 static inline int clk_set_min_rate(struct clk *clk, unsigned long rate)
985 static inline int clk_set_max_rate(struct clk *clk, unsigned long rate)
990 static inline int clk_set_parent(struct clk *clk, struct clk *parent)
995 static inline struct clk *clk_get_parent(struct clk *clk)
1000 static inline struct clk *clk_get_sys(const char *dev_id, const char *con_id)
1005 static inline int clk_save_context(void)
1010 static inline void clk_restore_context(void) {}
1014 /* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
1015 static inline int clk_prepare_enable(struct clk *clk)
1019 ret = clk_prepare(clk);
1022 ret = clk_enable(clk);
1029 /* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
1030 static inline void clk_disable_unprepare(struct clk *clk)
1036 static inline int __must_check
1037 clk_bulk_prepare_enable(int num_clks, const struct clk_bulk_data *clks)
1041 ret = clk_bulk_prepare(num_clks, clks);
1044 ret = clk_bulk_enable(num_clks, clks);
1046 clk_bulk_unprepare(num_clks, clks);
1051 static inline void clk_bulk_disable_unprepare(int num_clks,
1052 const struct clk_bulk_data *clks)
1054 clk_bulk_disable(num_clks, clks);
1055 clk_bulk_unprepare(num_clks, clks);
1059 * clk_get_optional - lookup and obtain a reference to an optional clock
1061 * @dev: device for clock "consumer"
1062 * @id: clock consumer ID
1064 * Behaves the same as clk_get() except where there is no clock producer. In
1065 * this case, instead of returning -ENOENT, the function returns NULL.
1067 static inline struct clk *clk_get_optional(struct device *dev, const char *id)
1069 struct clk *clk = clk_get(dev, id);
1071 if (clk == ERR_PTR(-ENOENT))
1077 #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
1078 struct clk *of_clk_get(struct device_node *np, int index);
1079 struct clk *of_clk_get_by_name(struct device_node *np, const char *name);
1080 struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec);
1082 static inline struct clk *of_clk_get(struct device_node *np, int index)
1084 return ERR_PTR(-ENOENT);
1086 static inline struct clk *of_clk_get_by_name(struct device_node *np,
1089 return ERR_PTR(-ENOENT);
1091 static inline struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec)
1093 return ERR_PTR(-ENOENT);