GNU Linux-libre 5.15.155-gnu
[releases.git] / include / asm-generic / vmlinux.lds.h
1 /*
2  * Helper macros to support writing architecture specific
3  * linker scripts.
4  *
5  * A minimal linker scripts has following content:
6  * [This is a sample, architectures may have special requiriements]
7  *
8  * OUTPUT_FORMAT(...)
9  * OUTPUT_ARCH(...)
10  * ENTRY(...)
11  * SECTIONS
12  * {
13  *      . = START;
14  *      __init_begin = .;
15  *      HEAD_TEXT_SECTION
16  *      INIT_TEXT_SECTION(PAGE_SIZE)
17  *      INIT_DATA_SECTION(...)
18  *      PERCPU_SECTION(CACHELINE_SIZE)
19  *      __init_end = .;
20  *
21  *      _stext = .;
22  *      TEXT_SECTION = 0
23  *      _etext = .;
24  *
25  *      _sdata = .;
26  *      RO_DATA(PAGE_SIZE)
27  *      RW_DATA(...)
28  *      _edata = .;
29  *
30  *      EXCEPTION_TABLE(...)
31  *
32  *      BSS_SECTION(0, 0, 0)
33  *      _end = .;
34  *
35  *      STABS_DEBUG
36  *      DWARF_DEBUG
37  *      ELF_DETAILS
38  *
39  *      DISCARDS                // must be the last
40  * }
41  *
42  * [__init_begin, __init_end] is the init section that may be freed after init
43  *      // __init_begin and __init_end should be page aligned, so that we can
44  *      // free the whole .init memory
45  * [_stext, _etext] is the text section
46  * [_sdata, _edata] is the data section
47  *
48  * Some of the included output section have their own set of constants.
49  * Examples are: [__initramfs_start, __initramfs_end] for initramfs and
50  *               [__nosave_begin, __nosave_end] for the nosave data
51  */
52
53 #ifndef LOAD_OFFSET
54 #define LOAD_OFFSET 0
55 #endif
56
57 /*
58  * Only some architectures want to have the .notes segment visible in
59  * a separate PT_NOTE ELF Program Header. When this happens, it needs
60  * to be visible in both the kernel text's PT_LOAD and the PT_NOTE
61  * Program Headers. In this case, though, the PT_LOAD needs to be made
62  * the default again so that all the following sections don't also end
63  * up in the PT_NOTE Program Header.
64  */
65 #ifdef EMITS_PT_NOTE
66 #define NOTES_HEADERS           :text :note
67 #define NOTES_HEADERS_RESTORE   __restore_ph : { *(.__restore_ph) } :text
68 #else
69 #define NOTES_HEADERS
70 #define NOTES_HEADERS_RESTORE
71 #endif
72
73 /*
74  * Some architectures have non-executable read-only exception tables.
75  * They can be added to the RO_DATA segment by specifying their desired
76  * alignment.
77  */
78 #ifdef RO_EXCEPTION_TABLE_ALIGN
79 #define RO_EXCEPTION_TABLE      EXCEPTION_TABLE(RO_EXCEPTION_TABLE_ALIGN)
80 #else
81 #define RO_EXCEPTION_TABLE
82 #endif
83
84 /* Align . function alignment. */
85 #define ALIGN_FUNCTION()  . = ALIGN(CONFIG_FUNCTION_ALIGNMENT)
86
87 /*
88  * LD_DEAD_CODE_DATA_ELIMINATION option enables -fdata-sections, which
89  * generates .data.identifier sections, which need to be pulled in with
90  * .data. We don't want to pull in .data..other sections, which Linux
91  * has defined. Same for text and bss.
92  *
93  * With LTO_CLANG, the linker also splits sections by default, so we need
94  * these macros to combine the sections during the final link.
95  *
96  * RODATA_MAIN is not used because existing code already defines .rodata.x
97  * sections to be brought in with rodata.
98  */
99 #if defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) || defined(CONFIG_LTO_CLANG)
100 #define TEXT_MAIN .text .text.[0-9a-zA-Z_]*
101 #define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..L* .data..compoundliteral* .data.$__unnamed_* .data.$L*
102 #define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]*
103 #define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]* .rodata..L*
104 #define BSS_MAIN .bss .bss.[0-9a-zA-Z_]* .bss..compoundliteral*
105 #define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]*
106 #else
107 #define TEXT_MAIN .text
108 #define DATA_MAIN .data
109 #define SDATA_MAIN .sdata
110 #define RODATA_MAIN .rodata
111 #define BSS_MAIN .bss
112 #define SBSS_MAIN .sbss
113 #endif
114
115 /*
116  * GCC 4.5 and later have a 32 bytes section alignment for structures.
117  * Except GCC 4.9, that feels the need to align on 64 bytes.
118  */
119 #define STRUCT_ALIGNMENT 32
120 #define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT)
121
122 /*
123  * The order of the sched class addresses are important, as they are
124  * used to determine the order of the priority of each sched class in
125  * relation to each other.
126  */
127 #define SCHED_DATA                              \
128         STRUCT_ALIGN();                         \
129         __begin_sched_classes = .;              \
130         *(__idle_sched_class)                   \
131         *(__fair_sched_class)                   \
132         *(__rt_sched_class)                     \
133         *(__dl_sched_class)                     \
134         *(__stop_sched_class)                   \
135         __end_sched_classes = .;
136
137 /* The actual configuration determine if the init/exit sections
138  * are handled as text/data or they can be discarded (which
139  * often happens at runtime)
140  */
141 #ifdef CONFIG_HOTPLUG_CPU
142 #define CPU_KEEP(sec)    *(.cpu##sec)
143 #define CPU_DISCARD(sec)
144 #else
145 #define CPU_KEEP(sec)
146 #define CPU_DISCARD(sec) *(.cpu##sec)
147 #endif
148
149 #if defined(CONFIG_MEMORY_HOTPLUG)
150 #define MEM_KEEP(sec)    *(.mem##sec)
151 #define MEM_DISCARD(sec)
152 #else
153 #define MEM_KEEP(sec)
154 #define MEM_DISCARD(sec) *(.mem##sec)
155 #endif
156
157 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
158 /*
159  * The ftrace call sites are logged to a section whose name depends on the
160  * compiler option used. A given kernel image will only use one, AKA
161  * FTRACE_CALLSITE_SECTION. We capture all of them here to avoid header
162  * dependencies for FTRACE_CALLSITE_SECTION's definition.
163  *
164  * Need to also make ftrace_stub_graph point to ftrace_stub
165  * so that the same stub location may have different protocols
166  * and not mess up with C verifiers.
167  */
168 #define MCOUNT_REC()    . = ALIGN(8);                           \
169                         __start_mcount_loc = .;                 \
170                         KEEP(*(__mcount_loc))                   \
171                         KEEP(*(__patchable_function_entries))   \
172                         __stop_mcount_loc = .;                  \
173                         ftrace_stub_graph = ftrace_stub;
174 #else
175 # ifdef CONFIG_FUNCTION_TRACER
176 #  define MCOUNT_REC()  ftrace_stub_graph = ftrace_stub;
177 # else
178 #  define MCOUNT_REC()
179 # endif
180 #endif
181
182 #ifdef CONFIG_TRACE_BRANCH_PROFILING
183 #define LIKELY_PROFILE()        __start_annotated_branch_profile = .;   \
184                                 KEEP(*(_ftrace_annotated_branch))       \
185                                 __stop_annotated_branch_profile = .;
186 #else
187 #define LIKELY_PROFILE()
188 #endif
189
190 #ifdef CONFIG_PROFILE_ALL_BRANCHES
191 #define BRANCH_PROFILE()        __start_branch_profile = .;             \
192                                 KEEP(*(_ftrace_branch))                 \
193                                 __stop_branch_profile = .;
194 #else
195 #define BRANCH_PROFILE()
196 #endif
197
198 #ifdef CONFIG_KPROBES
199 #define KPROBE_BLACKLIST()      . = ALIGN(8);                                 \
200                                 __start_kprobe_blacklist = .;                 \
201                                 KEEP(*(_kprobe_blacklist))                    \
202                                 __stop_kprobe_blacklist = .;
203 #else
204 #define KPROBE_BLACKLIST()
205 #endif
206
207 #ifdef CONFIG_FUNCTION_ERROR_INJECTION
208 #define ERROR_INJECT_WHITELIST()        STRUCT_ALIGN();                       \
209                         __start_error_injection_whitelist = .;                \
210                         KEEP(*(_error_injection_whitelist))                   \
211                         __stop_error_injection_whitelist = .;
212 #else
213 #define ERROR_INJECT_WHITELIST()
214 #endif
215
216 #ifdef CONFIG_EVENT_TRACING
217 #define FTRACE_EVENTS() . = ALIGN(8);                                   \
218                         __start_ftrace_events = .;                      \
219                         KEEP(*(_ftrace_events))                         \
220                         __stop_ftrace_events = .;                       \
221                         __start_ftrace_eval_maps = .;                   \
222                         KEEP(*(_ftrace_eval_map))                       \
223                         __stop_ftrace_eval_maps = .;
224 #else
225 #define FTRACE_EVENTS()
226 #endif
227
228 #ifdef CONFIG_TRACING
229 #define TRACE_PRINTKS()  __start___trace_bprintk_fmt = .;      \
230                          KEEP(*(__trace_printk_fmt)) /* Trace_printk fmt' pointer */ \
231                          __stop___trace_bprintk_fmt = .;
232 #define TRACEPOINT_STR() __start___tracepoint_str = .;  \
233                          KEEP(*(__tracepoint_str)) /* Trace_printk fmt' pointer */ \
234                          __stop___tracepoint_str = .;
235 #else
236 #define TRACE_PRINTKS()
237 #define TRACEPOINT_STR()
238 #endif
239
240 #ifdef CONFIG_FTRACE_SYSCALLS
241 #define TRACE_SYSCALLS() . = ALIGN(8);                                  \
242                          __start_syscalls_metadata = .;                 \
243                          KEEP(*(__syscalls_metadata))                   \
244                          __stop_syscalls_metadata = .;
245 #else
246 #define TRACE_SYSCALLS()
247 #endif
248
249 #ifdef CONFIG_BPF_EVENTS
250 #define BPF_RAW_TP() STRUCT_ALIGN();                                    \
251                          __start__bpf_raw_tp = .;                       \
252                          KEEP(*(__bpf_raw_tp_map))                      \
253                          __stop__bpf_raw_tp = .;
254 #else
255 #define BPF_RAW_TP()
256 #endif
257
258 #ifdef CONFIG_SERIAL_EARLYCON
259 #define EARLYCON_TABLE() . = ALIGN(8);                          \
260                          __earlycon_table = .;                  \
261                          KEEP(*(__earlycon_table))              \
262                          __earlycon_table_end = .;
263 #else
264 #define EARLYCON_TABLE()
265 #endif
266
267 #ifdef CONFIG_SECURITY
268 #define LSM_TABLE()     . = ALIGN(8);                                   \
269                         __start_lsm_info = .;                           \
270                         KEEP(*(.lsm_info.init))                         \
271                         __end_lsm_info = .;
272 #define EARLY_LSM_TABLE()       . = ALIGN(8);                           \
273                         __start_early_lsm_info = .;                     \
274                         KEEP(*(.early_lsm_info.init))                   \
275                         __end_early_lsm_info = .;
276 #else
277 #define LSM_TABLE()
278 #define EARLY_LSM_TABLE()
279 #endif
280
281 #define ___OF_TABLE(cfg, name)  _OF_TABLE_##cfg(name)
282 #define __OF_TABLE(cfg, name)   ___OF_TABLE(cfg, name)
283 #define OF_TABLE(cfg, name)     __OF_TABLE(IS_ENABLED(cfg), name)
284 #define _OF_TABLE_0(name)
285 #define _OF_TABLE_1(name)                                               \
286         . = ALIGN(8);                                                   \
287         __##name##_of_table = .;                                        \
288         KEEP(*(__##name##_of_table))                                    \
289         KEEP(*(__##name##_of_table_end))
290
291 #define TIMER_OF_TABLES()       OF_TABLE(CONFIG_TIMER_OF, timer)
292 #define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip)
293 #define CLK_OF_TABLES()         OF_TABLE(CONFIG_COMMON_CLK, clk)
294 #define RESERVEDMEM_OF_TABLES() OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem)
295 #define CPU_METHOD_OF_TABLES()  OF_TABLE(CONFIG_SMP, cpu_method)
296 #define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method)
297
298 #ifdef CONFIG_ACPI
299 #define ACPI_PROBE_TABLE(name)                                          \
300         . = ALIGN(8);                                                   \
301         __##name##_acpi_probe_table = .;                                \
302         KEEP(*(__##name##_acpi_probe_table))                            \
303         __##name##_acpi_probe_table_end = .;
304 #else
305 #define ACPI_PROBE_TABLE(name)
306 #endif
307
308 #ifdef CONFIG_THERMAL
309 #define THERMAL_TABLE(name)                                             \
310         . = ALIGN(8);                                                   \
311         __##name##_thermal_table = .;                                   \
312         KEEP(*(__##name##_thermal_table))                               \
313         __##name##_thermal_table_end = .;
314 #else
315 #define THERMAL_TABLE(name)
316 #endif
317
318 #ifdef CONFIG_DTPM
319 #define DTPM_TABLE()                                                    \
320         . = ALIGN(8);                                                   \
321         __dtpm_table = .;                                               \
322         KEEP(*(__dtpm_table))                                           \
323         __dtpm_table_end = .;
324 #else
325 #define DTPM_TABLE()
326 #endif
327
328 #define KERNEL_DTB()                                                    \
329         STRUCT_ALIGN();                                                 \
330         __dtb_start = .;                                                \
331         KEEP(*(.dtb.init.rodata))                                       \
332         __dtb_end = .;
333
334 /*
335  * .data section
336  */
337 #define DATA_DATA                                                       \
338         *(.xiptext)                                                     \
339         *(DATA_MAIN)                                                    \
340         *(.data..decrypted)                                             \
341         *(.ref.data)                                                    \
342         *(.data..shared_aligned) /* percpu related */                   \
343         MEM_KEEP(init.data*)                                            \
344         MEM_KEEP(exit.data*)                                            \
345         *(.data.unlikely)                                               \
346         __start_once = .;                                               \
347         *(.data.once)                                                   \
348         __end_once = .;                                                 \
349         STRUCT_ALIGN();                                                 \
350         *(__tracepoints)                                                \
351         /* implement dynamic printk debug */                            \
352         . = ALIGN(8);                                                   \
353         __start___dyndbg = .;                                           \
354         KEEP(*(__dyndbg))                                               \
355         __stop___dyndbg = .;                                            \
356         LIKELY_PROFILE()                                                \
357         BRANCH_PROFILE()                                                \
358         TRACE_PRINTKS()                                                 \
359         BPF_RAW_TP()                                                    \
360         TRACEPOINT_STR()
361
362 /*
363  * Data section helpers
364  */
365 #define NOSAVE_DATA                                                     \
366         . = ALIGN(PAGE_SIZE);                                           \
367         __nosave_begin = .;                                             \
368         *(.data..nosave)                                                \
369         . = ALIGN(PAGE_SIZE);                                           \
370         __nosave_end = .;
371
372 #define PAGE_ALIGNED_DATA(page_align)                                   \
373         . = ALIGN(page_align);                                          \
374         *(.data..page_aligned)                                          \
375         . = ALIGN(page_align);
376
377 #define READ_MOSTLY_DATA(align)                                         \
378         . = ALIGN(align);                                               \
379         *(.data..read_mostly)                                           \
380         . = ALIGN(align);
381
382 #define CACHELINE_ALIGNED_DATA(align)                                   \
383         . = ALIGN(align);                                               \
384         *(.data..cacheline_aligned)
385
386 #define INIT_TASK_DATA(align)                                           \
387         . = ALIGN(align);                                               \
388         __start_init_task = .;                                          \
389         init_thread_union = .;                                          \
390         init_stack = .;                                                 \
391         KEEP(*(.data..init_task))                                       \
392         KEEP(*(.data..init_thread_info))                                \
393         . = __start_init_task + THREAD_SIZE;                            \
394         __end_init_task = .;
395
396 #define JUMP_TABLE_DATA                                                 \
397         . = ALIGN(8);                                                   \
398         __start___jump_table = .;                                       \
399         KEEP(*(__jump_table))                                           \
400         __stop___jump_table = .;
401
402 #define STATIC_CALL_DATA                                                \
403         . = ALIGN(8);                                                   \
404         __start_static_call_sites = .;                                  \
405         KEEP(*(.static_call_sites))                                     \
406         __stop_static_call_sites = .;                                   \
407         __start_static_call_tramp_key = .;                              \
408         KEEP(*(.static_call_tramp_key))                                 \
409         __stop_static_call_tramp_key = .;
410
411 /*
412  * Allow architectures to handle ro_after_init data on their
413  * own by defining an empty RO_AFTER_INIT_DATA.
414  */
415 #ifndef RO_AFTER_INIT_DATA
416 #define RO_AFTER_INIT_DATA                                              \
417         . = ALIGN(8);                                                   \
418         __start_ro_after_init = .;                                      \
419         *(.data..ro_after_init)                                         \
420         JUMP_TABLE_DATA                                                 \
421         STATIC_CALL_DATA                                                \
422         __end_ro_after_init = .;
423 #endif
424
425 /*
426  * Read only Data
427  */
428 #define RO_DATA(align)                                                  \
429         . = ALIGN((align));                                             \
430         .rodata           : AT(ADDR(.rodata) - LOAD_OFFSET) {           \
431                 __start_rodata = .;                                     \
432                 *(.rodata) *(.rodata.*)                                 \
433                 SCHED_DATA                                              \
434                 RO_AFTER_INIT_DATA      /* Read only after init */      \
435                 . = ALIGN(8);                                           \
436                 __start___tracepoints_ptrs = .;                         \
437                 KEEP(*(__tracepoints_ptrs)) /* Tracepoints: pointer array */ \
438                 __stop___tracepoints_ptrs = .;                          \
439                 *(__tracepoints_strings)/* Tracepoints: strings */      \
440         }                                                               \
441                                                                         \
442         .rodata1          : AT(ADDR(.rodata1) - LOAD_OFFSET) {          \
443                 *(.rodata1)                                             \
444         }                                                               \
445                                                                         \
446         /* PCI quirks */                                                \
447         .pci_fixup        : AT(ADDR(.pci_fixup) - LOAD_OFFSET) {        \
448                 __start_pci_fixups_early = .;                           \
449                 KEEP(*(.pci_fixup_early))                               \
450                 __end_pci_fixups_early = .;                             \
451                 __start_pci_fixups_header = .;                          \
452                 KEEP(*(.pci_fixup_header))                              \
453                 __end_pci_fixups_header = .;                            \
454                 __start_pci_fixups_final = .;                           \
455                 KEEP(*(.pci_fixup_final))                               \
456                 __end_pci_fixups_final = .;                             \
457                 __start_pci_fixups_enable = .;                          \
458                 KEEP(*(.pci_fixup_enable))                              \
459                 __end_pci_fixups_enable = .;                            \
460                 __start_pci_fixups_resume = .;                          \
461                 KEEP(*(.pci_fixup_resume))                              \
462                 __end_pci_fixups_resume = .;                            \
463                 __start_pci_fixups_resume_early = .;                    \
464                 KEEP(*(.pci_fixup_resume_early))                        \
465                 __end_pci_fixups_resume_early = .;                      \
466                 __start_pci_fixups_suspend = .;                         \
467                 KEEP(*(.pci_fixup_suspend))                             \
468                 __end_pci_fixups_suspend = .;                           \
469                 __start_pci_fixups_suspend_late = .;                    \
470                 KEEP(*(.pci_fixup_suspend_late))                        \
471                 __end_pci_fixups_suspend_late = .;                      \
472         }                                                               \
473                                                                         \
474         /* Built-in firmware blobs */                                   \
475         .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) ALIGN(8) {    \
476                 __start_builtin_fw = .;                                 \
477                 KEEP(*(.builtin_fw))                                    \
478                 __end_builtin_fw = .;                                   \
479         }                                                               \
480                                                                         \
481         TRACEDATA                                                       \
482                                                                         \
483         PRINTK_INDEX                                                    \
484                                                                         \
485         /* Kernel symbol table: Normal symbols */                       \
486         __ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {         \
487                 __start___ksymtab = .;                                  \
488                 KEEP(*(SORT(___ksymtab+*)))                             \
489                 __stop___ksymtab = .;                                   \
490         }                                                               \
491                                                                         \
492         /* Kernel symbol table: GPL-only symbols */                     \
493         __ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {     \
494                 __start___ksymtab_gpl = .;                              \
495                 KEEP(*(SORT(___ksymtab_gpl+*)))                         \
496                 __stop___ksymtab_gpl = .;                               \
497         }                                                               \
498                                                                         \
499         /* Kernel symbol table: Normal symbols */                       \
500         __kcrctab         : AT(ADDR(__kcrctab) - LOAD_OFFSET) {         \
501                 __start___kcrctab = .;                                  \
502                 KEEP(*(SORT(___kcrctab+*)))                             \
503                 __stop___kcrctab = .;                                   \
504         }                                                               \
505                                                                         \
506         /* Kernel symbol table: GPL-only symbols */                     \
507         __kcrctab_gpl     : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) {     \
508                 __start___kcrctab_gpl = .;                              \
509                 KEEP(*(SORT(___kcrctab_gpl+*)))                         \
510                 __stop___kcrctab_gpl = .;                               \
511         }                                                               \
512                                                                         \
513         /* Kernel symbol table: strings */                              \
514         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
515                 *(__ksymtab_strings)                                    \
516         }                                                               \
517                                                                         \
518         /* __*init sections */                                          \
519         __init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) {         \
520                 *(.ref.rodata)                                          \
521                 MEM_KEEP(init.rodata)                                   \
522                 MEM_KEEP(exit.rodata)                                   \
523         }                                                               \
524                                                                         \
525         /* Built-in module parameters. */                               \
526         __param : AT(ADDR(__param) - LOAD_OFFSET) {                     \
527                 __start___param = .;                                    \
528                 KEEP(*(__param))                                        \
529                 __stop___param = .;                                     \
530         }                                                               \
531                                                                         \
532         /* Built-in module versions. */                                 \
533         __modver : AT(ADDR(__modver) - LOAD_OFFSET) {                   \
534                 __start___modver = .;                                   \
535                 KEEP(*(__modver))                                       \
536                 __stop___modver = .;                                    \
537         }                                                               \
538                                                                         \
539         RO_EXCEPTION_TABLE                                              \
540         NOTES                                                           \
541         BTF                                                             \
542                                                                         \
543         . = ALIGN((align));                                             \
544         __end_rodata = .;
545
546
547 /*
548  * .text..L.cfi.jumptable.* contain Control-Flow Integrity (CFI)
549  * jump table entries.
550  */
551 #ifdef CONFIG_CFI_CLANG
552 #define TEXT_CFI_JT                                                     \
553                 ALIGN_FUNCTION();                                       \
554                 __cfi_jt_start = .;                                     \
555                 *(.text..L.cfi.jumptable .text..L.cfi.jumptable.*)      \
556                 __cfi_jt_end = .;
557 #else
558 #define TEXT_CFI_JT
559 #endif
560
561 /*
562  * Non-instrumentable text section
563  */
564 #define NOINSTR_TEXT                                                    \
565                 ALIGN_FUNCTION();                                       \
566                 __noinstr_text_start = .;                               \
567                 *(.noinstr.text)                                        \
568                 __noinstr_text_end = .;
569
570 /*
571  * .text section. Map to function alignment to avoid address changes
572  * during second ld run in second ld pass when generating System.map
573  *
574  * TEXT_MAIN here will match .text.fixup and .text.unlikely if dead
575  * code elimination is enabled, so these sections should be converted
576  * to use ".." first.
577  */
578 #define TEXT_TEXT                                                       \
579                 ALIGN_FUNCTION();                                       \
580                 *(.text.hot .text.hot.*)                                \
581                 *(TEXT_MAIN .text.fixup)                                \
582                 *(.text.unlikely .text.unlikely.*)                      \
583                 *(.text.unknown .text.unknown.*)                        \
584                 NOINSTR_TEXT                                            \
585                 *(.text..refcount)                                      \
586                 *(.ref.text)                                            \
587                 *(.text.asan.* .text.tsan.*)                            \
588                 TEXT_CFI_JT                                             \
589         MEM_KEEP(init.text*)                                            \
590         MEM_KEEP(exit.text*)                                            \
591
592
593 /* sched.text is aling to function alignment to secure we have same
594  * address even at second ld pass when generating System.map */
595 #define SCHED_TEXT                                                      \
596                 ALIGN_FUNCTION();                                       \
597                 __sched_text_start = .;                                 \
598                 *(.sched.text)                                          \
599                 __sched_text_end = .;
600
601 /* spinlock.text is aling to function alignment to secure we have same
602  * address even at second ld pass when generating System.map */
603 #define LOCK_TEXT                                                       \
604                 ALIGN_FUNCTION();                                       \
605                 __lock_text_start = .;                                  \
606                 *(.spinlock.text)                                       \
607                 __lock_text_end = .;
608
609 #define CPUIDLE_TEXT                                                    \
610                 ALIGN_FUNCTION();                                       \
611                 __cpuidle_text_start = .;                               \
612                 *(.cpuidle.text)                                        \
613                 __cpuidle_text_end = .;
614
615 #define KPROBES_TEXT                                                    \
616                 ALIGN_FUNCTION();                                       \
617                 __kprobes_text_start = .;                               \
618                 *(.kprobes.text)                                        \
619                 __kprobes_text_end = .;
620
621 #define ENTRY_TEXT                                                      \
622                 ALIGN_FUNCTION();                                       \
623                 __entry_text_start = .;                                 \
624                 *(.entry.text)                                          \
625                 __entry_text_end = .;
626
627 #define IRQENTRY_TEXT                                                   \
628                 ALIGN_FUNCTION();                                       \
629                 __irqentry_text_start = .;                              \
630                 *(.irqentry.text)                                       \
631                 __irqentry_text_end = .;
632
633 #define SOFTIRQENTRY_TEXT                                               \
634                 ALIGN_FUNCTION();                                       \
635                 __softirqentry_text_start = .;                          \
636                 *(.softirqentry.text)                                   \
637                 __softirqentry_text_end = .;
638
639 #define STATIC_CALL_TEXT                                                \
640                 ALIGN_FUNCTION();                                       \
641                 __static_call_text_start = .;                           \
642                 *(.static_call.text)                                    \
643                 __static_call_text_end = .;
644
645 /* Section used for early init (in .S files) */
646 #define HEAD_TEXT  KEEP(*(.head.text))
647
648 #define HEAD_TEXT_SECTION                                                       \
649         .head.text : AT(ADDR(.head.text) - LOAD_OFFSET) {               \
650                 HEAD_TEXT                                               \
651         }
652
653 /*
654  * Exception table
655  */
656 #define EXCEPTION_TABLE(align)                                          \
657         . = ALIGN(align);                                               \
658         __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {               \
659                 __start___ex_table = .;                                 \
660                 KEEP(*(__ex_table))                                     \
661                 __stop___ex_table = .;                                  \
662         }
663
664 /*
665  * .BTF
666  */
667 #ifdef CONFIG_DEBUG_INFO_BTF
668 #define BTF                                                             \
669         .BTF : AT(ADDR(.BTF) - LOAD_OFFSET) {                           \
670                 __start_BTF = .;                                        \
671                 KEEP(*(.BTF))                                           \
672                 __stop_BTF = .;                                         \
673         }                                                               \
674         . = ALIGN(4);                                                   \
675         .BTF_ids : AT(ADDR(.BTF_ids) - LOAD_OFFSET) {                   \
676                 *(.BTF_ids)                                             \
677         }
678 #else
679 #define BTF
680 #endif
681
682 /*
683  * Init task
684  */
685 #define INIT_TASK_DATA_SECTION(align)                                   \
686         . = ALIGN(align);                                               \
687         .data..init_task :  AT(ADDR(.data..init_task) - LOAD_OFFSET) {  \
688                 INIT_TASK_DATA(align)                                   \
689         }
690
691 #ifdef CONFIG_CONSTRUCTORS
692 #define KERNEL_CTORS()  . = ALIGN(8);                      \
693                         __ctors_start = .;                 \
694                         KEEP(*(SORT(.ctors.*)))            \
695                         KEEP(*(.ctors))                    \
696                         KEEP(*(SORT(.init_array.*)))       \
697                         KEEP(*(.init_array))               \
698                         __ctors_end = .;
699 #else
700 #define KERNEL_CTORS()
701 #endif
702
703 /* init and exit section handling */
704 #define INIT_DATA                                                       \
705         KEEP(*(SORT(___kentry+*)))                                      \
706         *(.init.data init.data.*)                                       \
707         MEM_DISCARD(init.data*)                                         \
708         KERNEL_CTORS()                                                  \
709         MCOUNT_REC()                                                    \
710         *(.init.rodata .init.rodata.*)                                  \
711         FTRACE_EVENTS()                                                 \
712         TRACE_SYSCALLS()                                                \
713         KPROBE_BLACKLIST()                                              \
714         ERROR_INJECT_WHITELIST()                                        \
715         MEM_DISCARD(init.rodata)                                        \
716         CLK_OF_TABLES()                                                 \
717         RESERVEDMEM_OF_TABLES()                                         \
718         TIMER_OF_TABLES()                                               \
719         CPU_METHOD_OF_TABLES()                                          \
720         CPUIDLE_METHOD_OF_TABLES()                                      \
721         KERNEL_DTB()                                                    \
722         IRQCHIP_OF_MATCH_TABLE()                                        \
723         ACPI_PROBE_TABLE(irqchip)                                       \
724         ACPI_PROBE_TABLE(timer)                                         \
725         THERMAL_TABLE(governor)                                         \
726         DTPM_TABLE()                                                    \
727         EARLYCON_TABLE()                                                \
728         LSM_TABLE()                                                     \
729         EARLY_LSM_TABLE()                                               \
730         KUNIT_TABLE()
731
732 #define INIT_TEXT                                                       \
733         *(.init.text .init.text.*)                                      \
734         *(.text.startup)                                                \
735         MEM_DISCARD(init.text*)
736
737 #define EXIT_DATA                                                       \
738         *(.exit.data .exit.data.*)                                      \
739         *(.fini_array .fini_array.*)                                    \
740         *(.dtors .dtors.*)                                              \
741         MEM_DISCARD(exit.data*)                                         \
742         MEM_DISCARD(exit.rodata*)
743
744 #define EXIT_TEXT                                                       \
745         *(.exit.text)                                                   \
746         *(.text.exit)                                                   \
747         MEM_DISCARD(exit.text)
748
749 #define EXIT_CALL                                                       \
750         *(.exitcall.exit)
751
752 /*
753  * bss (Block Started by Symbol) - uninitialized data
754  * zeroed during startup
755  */
756 #define SBSS(sbss_align)                                                \
757         . = ALIGN(sbss_align);                                          \
758         .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {                         \
759                 *(.dynsbss)                                             \
760                 *(SBSS_MAIN)                                            \
761                 *(.scommon)                                             \
762         }
763
764 /*
765  * Allow archectures to redefine BSS_FIRST_SECTIONS to add extra
766  * sections to the front of bss.
767  */
768 #ifndef BSS_FIRST_SECTIONS
769 #define BSS_FIRST_SECTIONS
770 #endif
771
772 #define BSS(bss_align)                                                  \
773         . = ALIGN(bss_align);                                           \
774         .bss : AT(ADDR(.bss) - LOAD_OFFSET) {                           \
775                 BSS_FIRST_SECTIONS                                      \
776                 . = ALIGN(PAGE_SIZE);                                   \
777                 *(.bss..page_aligned)                                   \
778                 . = ALIGN(PAGE_SIZE);                                   \
779                 *(.dynbss)                                              \
780                 *(BSS_MAIN)                                             \
781                 *(COMMON)                                               \
782         }
783
784 /*
785  * DWARF debug sections.
786  * Symbols in the DWARF debugging sections are relative to
787  * the beginning of the section so we begin them at 0.
788  */
789 #define DWARF_DEBUG                                                     \
790                 /* DWARF 1 */                                           \
791                 .debug          0 : { *(.debug) }                       \
792                 .line           0 : { *(.line) }                        \
793                 /* GNU DWARF 1 extensions */                            \
794                 .debug_srcinfo  0 : { *(.debug_srcinfo) }               \
795                 .debug_sfnames  0 : { *(.debug_sfnames) }               \
796                 /* DWARF 1.1 and DWARF 2 */                             \
797                 .debug_aranges  0 : { *(.debug_aranges) }               \
798                 .debug_pubnames 0 : { *(.debug_pubnames) }              \
799                 /* DWARF 2 */                                           \
800                 .debug_info     0 : { *(.debug_info                     \
801                                 .gnu.linkonce.wi.*) }                   \
802                 .debug_abbrev   0 : { *(.debug_abbrev) }                \
803                 .debug_line     0 : { *(.debug_line) }                  \
804                 .debug_frame    0 : { *(.debug_frame) }                 \
805                 .debug_str      0 : { *(.debug_str) }                   \
806                 .debug_loc      0 : { *(.debug_loc) }                   \
807                 .debug_macinfo  0 : { *(.debug_macinfo) }               \
808                 .debug_pubtypes 0 : { *(.debug_pubtypes) }              \
809                 /* DWARF 3 */                                           \
810                 .debug_ranges   0 : { *(.debug_ranges) }                \
811                 /* SGI/MIPS DWARF 2 extensions */                       \
812                 .debug_weaknames 0 : { *(.debug_weaknames) }            \
813                 .debug_funcnames 0 : { *(.debug_funcnames) }            \
814                 .debug_typenames 0 : { *(.debug_typenames) }            \
815                 .debug_varnames  0 : { *(.debug_varnames) }             \
816                 /* GNU DWARF 2 extensions */                            \
817                 .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }      \
818                 .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }      \
819                 /* DWARF 4 */                                           \
820                 .debug_types    0 : { *(.debug_types) }                 \
821                 /* DWARF 5 */                                           \
822                 .debug_addr     0 : { *(.debug_addr) }                  \
823                 .debug_line_str 0 : { *(.debug_line_str) }              \
824                 .debug_loclists 0 : { *(.debug_loclists) }              \
825                 .debug_macro    0 : { *(.debug_macro) }                 \
826                 .debug_names    0 : { *(.debug_names) }                 \
827                 .debug_rnglists 0 : { *(.debug_rnglists) }              \
828                 .debug_str_offsets      0 : { *(.debug_str_offsets) }
829
830 /* Stabs debugging sections. */
831 #define STABS_DEBUG                                                     \
832                 .stab 0 : { *(.stab) }                                  \
833                 .stabstr 0 : { *(.stabstr) }                            \
834                 .stab.excl 0 : { *(.stab.excl) }                        \
835                 .stab.exclstr 0 : { *(.stab.exclstr) }                  \
836                 .stab.index 0 : { *(.stab.index) }                      \
837                 .stab.indexstr 0 : { *(.stab.indexstr) }
838
839 /* Required sections not related to debugging. */
840 #define ELF_DETAILS                                                     \
841                 .comment 0 : { *(.comment) }                            \
842                 .symtab 0 : { *(.symtab) }                              \
843                 .strtab 0 : { *(.strtab) }                              \
844                 .shstrtab 0 : { *(.shstrtab) }
845
846 #ifdef CONFIG_GENERIC_BUG
847 #define BUG_TABLE                                                       \
848         . = ALIGN(8);                                                   \
849         __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) {             \
850                 __start___bug_table = .;                                \
851                 KEEP(*(__bug_table))                                    \
852                 __stop___bug_table = .;                                 \
853         }
854 #else
855 #define BUG_TABLE
856 #endif
857
858 #ifdef CONFIG_UNWINDER_ORC
859 #define ORC_UNWIND_TABLE                                                \
860         . = ALIGN(4);                                                   \
861         .orc_unwind_ip : AT(ADDR(.orc_unwind_ip) - LOAD_OFFSET) {       \
862                 __start_orc_unwind_ip = .;                              \
863                 KEEP(*(.orc_unwind_ip))                                 \
864                 __stop_orc_unwind_ip = .;                               \
865         }                                                               \
866         . = ALIGN(2);                                                   \
867         .orc_unwind : AT(ADDR(.orc_unwind) - LOAD_OFFSET) {             \
868                 __start_orc_unwind = .;                                 \
869                 KEEP(*(.orc_unwind))                                    \
870                 __stop_orc_unwind = .;                                  \
871         }                                                               \
872         . = ALIGN(4);                                                   \
873         .orc_lookup : AT(ADDR(.orc_lookup) - LOAD_OFFSET) {             \
874                 orc_lookup = .;                                         \
875                 . += (((SIZEOF(.text) + LOOKUP_BLOCK_SIZE - 1) /        \
876                         LOOKUP_BLOCK_SIZE) + 1) * 4;                    \
877                 orc_lookup_end = .;                                     \
878         }
879 #else
880 #define ORC_UNWIND_TABLE
881 #endif
882
883 #ifdef CONFIG_PM_TRACE
884 #define TRACEDATA                                                       \
885         . = ALIGN(4);                                                   \
886         .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {               \
887                 __tracedata_start = .;                                  \
888                 KEEP(*(.tracedata))                                     \
889                 __tracedata_end = .;                                    \
890         }
891 #else
892 #define TRACEDATA
893 #endif
894
895 #ifdef CONFIG_PRINTK_INDEX
896 #define PRINTK_INDEX                                                    \
897         .printk_index : AT(ADDR(.printk_index) - LOAD_OFFSET) {         \
898                 __start_printk_index = .;                               \
899                 *(.printk_index)                                        \
900                 __stop_printk_index = .;                                \
901         }
902 #else
903 #define PRINTK_INDEX
904 #endif
905
906 /*
907  * Discard .note.GNU-stack, which is emitted as PROGBITS by the compiler.
908  * Otherwise, the type of .notes section would become PROGBITS instead of NOTES.
909  */
910 #define NOTES                                                           \
911         /DISCARD/ : { *(.note.GNU-stack) }                              \
912         .notes : AT(ADDR(.notes) - LOAD_OFFSET) {                       \
913                 __start_notes = .;                                      \
914                 KEEP(*(.note.*))                                        \
915                 __stop_notes = .;                                       \
916         } NOTES_HEADERS                                                 \
917         NOTES_HEADERS_RESTORE
918
919 #define INIT_SETUP(initsetup_align)                                     \
920                 . = ALIGN(initsetup_align);                             \
921                 __setup_start = .;                                      \
922                 KEEP(*(.init.setup))                                    \
923                 __setup_end = .;
924
925 #define INIT_CALLS_LEVEL(level)                                         \
926                 __initcall##level##_start = .;                          \
927                 KEEP(*(.initcall##level##.init))                        \
928                 KEEP(*(.initcall##level##s.init))                       \
929
930 #define INIT_CALLS                                                      \
931                 __initcall_start = .;                                   \
932                 KEEP(*(.initcallearly.init))                            \
933                 INIT_CALLS_LEVEL(0)                                     \
934                 INIT_CALLS_LEVEL(1)                                     \
935                 INIT_CALLS_LEVEL(2)                                     \
936                 INIT_CALLS_LEVEL(3)                                     \
937                 INIT_CALLS_LEVEL(4)                                     \
938                 INIT_CALLS_LEVEL(5)                                     \
939                 INIT_CALLS_LEVEL(rootfs)                                \
940                 INIT_CALLS_LEVEL(6)                                     \
941                 INIT_CALLS_LEVEL(7)                                     \
942                 __initcall_end = .;
943
944 #define CON_INITCALL                                                    \
945                 __con_initcall_start = .;                               \
946                 KEEP(*(.con_initcall.init))                             \
947                 __con_initcall_end = .;
948
949 /* Alignment must be consistent with (kunit_suite *) in include/kunit/test.h */
950 #define KUNIT_TABLE()                                                   \
951                 . = ALIGN(8);                                           \
952                 __kunit_suites_start = .;                               \
953                 KEEP(*(.kunit_test_suites))                             \
954                 __kunit_suites_end = .;
955
956 #ifdef CONFIG_BLK_DEV_INITRD
957 #define INIT_RAM_FS                                                     \
958         . = ALIGN(4);                                                   \
959         __initramfs_start = .;                                          \
960         KEEP(*(.init.ramfs))                                            \
961         . = ALIGN(8);                                                   \
962         KEEP(*(.init.ramfs.info))
963 #else
964 #define INIT_RAM_FS
965 #endif
966
967 /*
968  * Memory encryption operates on a page basis. Since we need to clear
969  * the memory encryption mask for this section, it needs to be aligned
970  * on a page boundary and be a page-size multiple in length.
971  *
972  * Note: We use a separate section so that only this section gets
973  * decrypted to avoid exposing more than we wish.
974  */
975 #ifdef CONFIG_AMD_MEM_ENCRYPT
976 #define PERCPU_DECRYPTED_SECTION                                        \
977         . = ALIGN(PAGE_SIZE);                                           \
978         *(.data..percpu..decrypted)                                     \
979         . = ALIGN(PAGE_SIZE);
980 #else
981 #define PERCPU_DECRYPTED_SECTION
982 #endif
983
984
985 /*
986  * Default discarded sections.
987  *
988  * Some archs want to discard exit text/data at runtime rather than
989  * link time due to cross-section references such as alt instructions,
990  * bug table, eh_frame, etc.  DISCARDS must be the last of output
991  * section definitions so that such archs put those in earlier section
992  * definitions.
993  */
994 #ifdef RUNTIME_DISCARD_EXIT
995 #define EXIT_DISCARDS
996 #else
997 #define EXIT_DISCARDS                                                   \
998         EXIT_TEXT                                                       \
999         EXIT_DATA
1000 #endif
1001
1002 /*
1003  * Clang's -fprofile-arcs, -fsanitize=kernel-address, and
1004  * -fsanitize=thread produce unwanted sections (.eh_frame
1005  * and .init_array.*), but CONFIG_CONSTRUCTORS wants to
1006  * keep any .init_array.* sections.
1007  * https://bugs.llvm.org/show_bug.cgi?id=46478
1008  */
1009 #if defined(CONFIG_GCOV_KERNEL) || defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KCSAN) || \
1010         defined(CONFIG_CFI_CLANG)
1011 # ifdef CONFIG_CONSTRUCTORS
1012 #  define SANITIZER_DISCARDS                                            \
1013         *(.eh_frame)
1014 # else
1015 #  define SANITIZER_DISCARDS                                            \
1016         *(.init_array) *(.init_array.*)                                 \
1017         *(.eh_frame)
1018 # endif
1019 #else
1020 # define SANITIZER_DISCARDS
1021 #endif
1022
1023 #define COMMON_DISCARDS                                                 \
1024         SANITIZER_DISCARDS                                              \
1025         *(.discard)                                                     \
1026         *(.discard.*)                                                   \
1027         *(.modinfo)                                                     \
1028         /* ld.bfd warns about .gnu.version* even when not emitted */    \
1029         *(.gnu.version*)                                                \
1030
1031 #define DISCARDS                                                        \
1032         /DISCARD/ : {                                                   \
1033         EXIT_DISCARDS                                                   \
1034         EXIT_CALL                                                       \
1035         COMMON_DISCARDS                                                 \
1036         }
1037
1038 /**
1039  * PERCPU_INPUT - the percpu input sections
1040  * @cacheline: cacheline size
1041  *
1042  * The core percpu section names and core symbols which do not rely
1043  * directly upon load addresses.
1044  *
1045  * @cacheline is used to align subsections to avoid false cacheline
1046  * sharing between subsections for different purposes.
1047  */
1048 #define PERCPU_INPUT(cacheline)                                         \
1049         __per_cpu_start = .;                                            \
1050         *(.data..percpu..first)                                         \
1051         . = ALIGN(PAGE_SIZE);                                           \
1052         *(.data..percpu..page_aligned)                                  \
1053         . = ALIGN(cacheline);                                           \
1054         *(.data..percpu..read_mostly)                                   \
1055         . = ALIGN(cacheline);                                           \
1056         *(.data..percpu)                                                \
1057         *(.data..percpu..shared_aligned)                                \
1058         PERCPU_DECRYPTED_SECTION                                        \
1059         __per_cpu_end = .;
1060
1061 /**
1062  * PERCPU_VADDR - define output section for percpu area
1063  * @cacheline: cacheline size
1064  * @vaddr: explicit base address (optional)
1065  * @phdr: destination PHDR (optional)
1066  *
1067  * Macro which expands to output section for percpu area.
1068  *
1069  * @cacheline is used to align subsections to avoid false cacheline
1070  * sharing between subsections for different purposes.
1071  *
1072  * If @vaddr is not blank, it specifies explicit base address and all
1073  * percpu symbols will be offset from the given address.  If blank,
1074  * @vaddr always equals @laddr + LOAD_OFFSET.
1075  *
1076  * @phdr defines the output PHDR to use if not blank.  Be warned that
1077  * output PHDR is sticky.  If @phdr is specified, the next output
1078  * section in the linker script will go there too.  @phdr should have
1079  * a leading colon.
1080  *
1081  * Note that this macros defines __per_cpu_load as an absolute symbol.
1082  * If there is no need to put the percpu section at a predetermined
1083  * address, use PERCPU_SECTION.
1084  */
1085 #define PERCPU_VADDR(cacheline, vaddr, phdr)                            \
1086         __per_cpu_load = .;                                             \
1087         .data..percpu vaddr : AT(__per_cpu_load - LOAD_OFFSET) {        \
1088                 PERCPU_INPUT(cacheline)                                 \
1089         } phdr                                                          \
1090         . = __per_cpu_load + SIZEOF(.data..percpu);
1091
1092 /**
1093  * PERCPU_SECTION - define output section for percpu area, simple version
1094  * @cacheline: cacheline size
1095  *
1096  * Align to PAGE_SIZE and outputs output section for percpu area.  This
1097  * macro doesn't manipulate @vaddr or @phdr and __per_cpu_load and
1098  * __per_cpu_start will be identical.
1099  *
1100  * This macro is equivalent to ALIGN(PAGE_SIZE); PERCPU_VADDR(@cacheline,,)
1101  * except that __per_cpu_load is defined as a relative symbol against
1102  * .data..percpu which is required for relocatable x86_32 configuration.
1103  */
1104 #define PERCPU_SECTION(cacheline)                                       \
1105         . = ALIGN(PAGE_SIZE);                                           \
1106         .data..percpu   : AT(ADDR(.data..percpu) - LOAD_OFFSET) {       \
1107                 __per_cpu_load = .;                                     \
1108                 PERCPU_INPUT(cacheline)                                 \
1109         }
1110
1111
1112 /*
1113  * Definition of the high level *_SECTION macros
1114  * They will fit only a subset of the architectures
1115  */
1116
1117
1118 /*
1119  * Writeable data.
1120  * All sections are combined in a single .data section.
1121  * The sections following CONSTRUCTORS are arranged so their
1122  * typical alignment matches.
1123  * A cacheline is typical/always less than a PAGE_SIZE so
1124  * the sections that has this restriction (or similar)
1125  * is located before the ones requiring PAGE_SIZE alignment.
1126  * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which
1127  * matches the requirement of PAGE_ALIGNED_DATA.
1128  *
1129  * use 0 as page_align if page_aligned data is not used */
1130 #define RW_DATA(cacheline, pagealigned, inittask)                       \
1131         . = ALIGN(PAGE_SIZE);                                           \
1132         .data : AT(ADDR(.data) - LOAD_OFFSET) {                         \
1133                 INIT_TASK_DATA(inittask)                                \
1134                 NOSAVE_DATA                                             \
1135                 PAGE_ALIGNED_DATA(pagealigned)                          \
1136                 CACHELINE_ALIGNED_DATA(cacheline)                       \
1137                 READ_MOSTLY_DATA(cacheline)                             \
1138                 DATA_DATA                                               \
1139                 CONSTRUCTORS                                            \
1140         }                                                               \
1141         BUG_TABLE                                                       \
1142
1143 #define INIT_TEXT_SECTION(inittext_align)                               \
1144         . = ALIGN(inittext_align);                                      \
1145         .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {               \
1146                 _sinittext = .;                                         \
1147                 INIT_TEXT                                               \
1148                 _einittext = .;                                         \
1149         }
1150
1151 #define INIT_DATA_SECTION(initsetup_align)                              \
1152         .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {               \
1153                 INIT_DATA                                               \
1154                 INIT_SETUP(initsetup_align)                             \
1155                 INIT_CALLS                                              \
1156                 CON_INITCALL                                            \
1157                 INIT_RAM_FS                                             \
1158         }
1159
1160 #define BSS_SECTION(sbss_align, bss_align, stop_align)                  \
1161         . = ALIGN(sbss_align);                                          \
1162         __bss_start = .;                                                \
1163         SBSS(sbss_align)                                                \
1164         BSS(bss_align)                                                  \
1165         . = ALIGN(stop_align);                                          \
1166         __bss_stop = .;