2 * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
3 * Initial PowerPC version.
4 * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
6 * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
7 * Low-level exception handers, MMU support, and rewrite.
8 * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
9 * PowerPC 8xx modifications.
10 * Copyright (c) 1998-1999 TiVo, Inc.
11 * PowerPC 403GCX modifications.
12 * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
13 * PowerPC 403GCX/405GP modifications.
14 * Copyright 2000 MontaVista Software Inc.
15 * PPC405 modifications
16 * PowerPC 403GCX/405GP modifications.
17 * Author: MontaVista Software, Inc.
18 * frank_rowand@mvista.com or source@mvista.com
19 * debbie_chu@mvista.com
22 * Module name: head_4xx.S
25 * Kernel execution entry point code.
27 * This program is free software; you can redistribute it and/or
28 * modify it under the terms of the GNU General Public License
29 * as published by the Free Software Foundation; either version
30 * 2 of the License, or (at your option) any later version.
34 #include <linux/init.h>
35 #include <asm/processor.h>
38 #include <asm/pgtable.h>
39 #include <asm/cputable.h>
40 #include <asm/thread_info.h>
41 #include <asm/ppc_asm.h>
42 #include <asm/asm-offsets.h>
43 #include <asm/ptrace.h>
44 #include <asm/export.h>
45 #include <asm/asm-405.h>
47 /* As with the other PowerPC ports, it is expected that when code
48 * execution begins here, the following registers contain valid, yet
49 * optional, information:
51 * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
52 * r4 - Starting address of the init RAM disk
53 * r5 - Ending address of the init RAM disk
54 * r6 - Start of kernel command line string (e.g. "mem=96m")
55 * r7 - End of kernel command line string
57 * This is all going to change RSN when we add bi_recs....... -- Dan
63 mr r31,r3 /* save device tree ptr */
65 /* We have to turn on the MMU right away so we get cache modes
70 /* We now have the lower 16 Meg mapped into TLB entries, and the caches
75 ori r0,r0,MSR_KERNEL@l
78 ori r0,r0,start_here@l
82 b . /* prevent prefetch past rfi */
85 * This area is used for temporarily saving registers during the
86 * critical exception prolog.
98 _ENTRY(saved_ksp_limit)
102 * Exception vector entry code. This code runs with address translation
103 * turned off (i.e. using physical addresses). We assume SPRG_THREAD has
104 * the physical address of the current task thread_struct.
105 * Note that we have to have decremented r1 before we write to any fields
106 * of the exception frame, since a critical interrupt could occur at any
107 * time, and it will write to the area immediately below the current r1.
109 #define NORMAL_EXCEPTION_PROLOG \
110 mtspr SPRN_SPRG_SCRATCH0,r10; /* save two registers to work with */\
111 mtspr SPRN_SPRG_SCRATCH1,r11; \
112 mtspr SPRN_SPRG_SCRATCH2,r1; \
113 mfcr r10; /* save CR in r10 for now */\
114 mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
115 andi. r11,r11,MSR_PR; \
117 mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\
118 lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
119 addi r1,r1,THREAD_SIZE; \
120 1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
122 stw r10,_CCR(r11); /* save various registers */\
123 stw r12,GPR12(r11); \
125 mfspr r10,SPRN_SPRG_SCRATCH0; \
126 stw r10,GPR10(r11); \
127 mfspr r12,SPRN_SPRG_SCRATCH1; \
128 stw r12,GPR11(r11); \
130 stw r10,_LINK(r11); \
131 mfspr r10,SPRN_SPRG_SCRATCH2; \
132 mfspr r12,SPRN_SRR0; \
134 mfspr r9,SPRN_SRR1; \
136 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
138 SAVE_4GPRS(3, r11); \
142 * Exception prolog for critical exceptions. This is a little different
143 * from the normal exception prolog above since a critical exception
144 * can potentially occur at any point during normal exception processing.
145 * Thus we cannot use the same SPRG registers as the normal prolog above.
146 * Instead we use a couple of words of memory at low physical addresses.
147 * This is OK since we don't support SMP on these processors.
149 #define CRITICAL_EXCEPTION_PROLOG \
150 stw r10,crit_r10@l(0); /* save two registers to work with */\
151 stw r11,crit_r11@l(0); \
152 mfcr r10; /* save CR in r10 for now */\
153 mfspr r11,SPRN_SRR3; /* check whether user or kernel */\
154 andi. r11,r11,MSR_PR; \
155 lis r11,critirq_ctx@ha; \
157 lwz r11,critirq_ctx@l(r11); \
159 /* COMING FROM USER MODE */ \
160 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
161 lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
162 1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\
164 stw r10,_CCR(r11); /* save various registers */\
165 stw r12,GPR12(r11); \
168 stw r10,_LINK(r11); \
169 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
170 stw r12,_DEAR(r11); /* since they may have had stuff */\
171 mfspr r9,SPRN_ESR; /* in them at the point where the */\
172 stw r9,_ESR(r11); /* exception was taken */\
173 mfspr r12,SPRN_SRR2; \
175 mfspr r9,SPRN_SRR3; \
178 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
180 SAVE_4GPRS(3, r11); \
184 * State at this point:
185 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
186 * r10 saved in crit_r10 and in stack frame, trashed
187 * r11 saved in crit_r11 and in stack frame,
188 * now phys stack/exception frame pointer
189 * r12 saved in stack frame, now saved SRR2
190 * CR saved in stack frame, CR0.EQ = !SRR3.PR
191 * LR, DEAR, ESR in stack frame
192 * r1 saved in stack frame, now virt stack/excframe pointer
193 * r0, r3-r8 saved in stack frame
199 #define START_EXCEPTION(n, label) \
203 #define EXCEPTION(n, label, hdlr, xfer) \
204 START_EXCEPTION(n, label); \
205 NORMAL_EXCEPTION_PROLOG; \
206 addi r3,r1,STACK_FRAME_OVERHEAD; \
209 #define CRITICAL_EXCEPTION(n, label, hdlr) \
210 START_EXCEPTION(n, label); \
211 CRITICAL_EXCEPTION_PROLOG; \
212 addi r3,r1,STACK_FRAME_OVERHEAD; \
213 EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
214 NOCOPY, crit_transfer_to_handler, \
217 #define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
219 stw r10,_TRAP(r11); \
227 #define COPY_EE(d, s) rlwimi d,s,0,16,16
230 #define EXC_XFER_STD(n, hdlr) \
231 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
232 ret_from_except_full)
234 #define EXC_XFER_LITE(n, hdlr) \
235 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
238 #define EXC_XFER_EE(n, hdlr) \
239 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
240 ret_from_except_full)
242 #define EXC_XFER_EE_LITE(n, hdlr) \
243 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
248 * 0x0100 - Critical Interrupt Exception
250 CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
253 * 0x0200 - Machine Check Exception
255 CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
258 * 0x0300 - Data Storage Exception
259 * This happens for just a few reasons. U0 set (but we don't do that),
260 * or zone protection fault (user violation, write to protected page).
261 * If this is just an update of modified status, we do that quickly
262 * and exit. Otherwise, we call heavywight functions to do the work.
264 START_EXCEPTION(0x0300, DataStorage)
265 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
266 mtspr SPRN_SPRG_SCRATCH1, r11
275 mtspr SPRN_SPRG_SCRATCH3, r12
276 mtspr SPRN_SPRG_SCRATCH4, r9
279 mtspr SPRN_SPRG_SCRATCH6, r11
280 mtspr SPRN_SPRG_SCRATCH5, r12
283 /* First, check if it was a zone fault (which means a user
284 * tried to access a kernel or read-protected page - always
285 * a SEGV). All other faults here must be stores, so no
286 * need to check ESR_DST as well. */
288 andis. r10, r10, ESR_DIZ@h
291 mfspr r10, SPRN_DEAR /* Get faulting address */
293 /* If we are faulting a kernel address, we have to use the
294 * kernel page tables.
296 lis r11, PAGE_OFFSET@h
299 lis r11, swapper_pg_dir@h
300 ori r11, r11, swapper_pg_dir@l
302 mtspr SPRN_PID, r9 /* TLB will have 0 TID */
305 /* Get the PGD for the current thread.
308 mfspr r11,SPRN_SPRG_THREAD
312 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
313 lwz r11, 0(r11) /* Get L1 entry */
314 rlwinm. r12, r11, 0, 0, 19 /* Extract L2 (pte) base address */
315 beq 2f /* Bail if no table */
317 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
318 lwz r11, 0(r12) /* Get Linux PTE */
320 andi. r9, r11, _PAGE_RW /* Is it writeable? */
321 beq 2f /* Bail if not */
325 ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
326 stw r11, 0(r12) /* Update Linux page table */
328 /* Most of the Linux PTE is ready to load into the TLB LO.
329 * We set ZSEL, where only the LS-bit determines user access.
330 * We set execute, because we don't have the granularity to
331 * properly set this at the page level (Linux problem).
332 * If shared is set, we cause a zero PID->TID load.
333 * Many of these bits are software only. Bits we don't set
334 * here we (properly should) assume have the appropriate value.
337 andc r11, r11, r12 /* Make sure 20, 21 are zero */
339 /* find the TLB index that caused the fault. It has to be here.
343 tlbwe r11, r9, TLB_DATA /* Load TLB LO */
345 /* Done...restore registers and get out of here.
355 mfspr r12, SPRN_SPRG_SCRATCH5
356 mfspr r11, SPRN_SPRG_SCRATCH6
359 mfspr r9, SPRN_SPRG_SCRATCH4
360 mfspr r12, SPRN_SPRG_SCRATCH3
362 mfspr r11, SPRN_SPRG_SCRATCH1
363 mfspr r10, SPRN_SPRG_SCRATCH0
365 rfi /* Should sync shadow TLBs */
366 b . /* prevent prefetch past rfi */
369 /* The bailout. Restore registers to pre-exception conditions
370 * and call the heavyweights to help us out.
380 mfspr r12, SPRN_SPRG_SCRATCH5
381 mfspr r11, SPRN_SPRG_SCRATCH6
384 mfspr r9, SPRN_SPRG_SCRATCH4
385 mfspr r12, SPRN_SPRG_SCRATCH3
387 mfspr r11, SPRN_SPRG_SCRATCH1
388 mfspr r10, SPRN_SPRG_SCRATCH0
392 * 0x0400 - Instruction Storage Exception
393 * This is caused by a fetch from non-execute or guarded pages.
395 START_EXCEPTION(0x0400, InstructionAccess)
396 NORMAL_EXCEPTION_PROLOG
397 mr r4,r12 /* Pass SRR0 as arg2 */
398 li r5,0 /* Pass zero as arg3 */
399 EXC_XFER_LITE(0x400, handle_page_fault)
401 /* 0x0500 - External Interrupt Exception */
402 EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
404 /* 0x0600 - Alignment Exception */
405 START_EXCEPTION(0x0600, Alignment)
406 NORMAL_EXCEPTION_PROLOG
407 mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
409 addi r3,r1,STACK_FRAME_OVERHEAD
410 EXC_XFER_EE(0x600, alignment_exception)
412 /* 0x0700 - Program Exception */
413 START_EXCEPTION(0x0700, ProgramCheck)
414 NORMAL_EXCEPTION_PROLOG
415 mfspr r4,SPRN_ESR /* Grab the ESR and save it */
417 addi r3,r1,STACK_FRAME_OVERHEAD
418 EXC_XFER_STD(0x700, program_check_exception)
420 EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
421 EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
422 EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
423 EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
425 /* 0x0C00 - System Call Exception */
426 START_EXCEPTION(0x0C00, SystemCall)
427 NORMAL_EXCEPTION_PROLOG
428 EXC_XFER_EE_LITE(0xc00, DoSyscall)
430 EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
431 EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
432 EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
434 /* 0x1000 - Programmable Interval Timer (PIT) Exception */
438 /* 0x1010 - Fixed Interval Timer (FIT) Exception
443 /* 0x1020 - Watchdog Timer (WDT) Exception
448 /* 0x1100 - Data TLB Miss Exception
449 * As the name implies, translation is not in the MMU, so search the
450 * page tables and fix it. The only purpose of this function is to
451 * load TLB entries from the page table if they exist.
453 START_EXCEPTION(0x1100, DTLBMiss)
454 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
455 mtspr SPRN_SPRG_SCRATCH1, r11
464 mtspr SPRN_SPRG_SCRATCH3, r12
465 mtspr SPRN_SPRG_SCRATCH4, r9
468 mtspr SPRN_SPRG_SCRATCH6, r11
469 mtspr SPRN_SPRG_SCRATCH5, r12
471 mfspr r10, SPRN_DEAR /* Get faulting address */
473 /* If we are faulting a kernel address, we have to use the
474 * kernel page tables.
476 lis r11, PAGE_OFFSET@h
479 lis r11, swapper_pg_dir@h
480 ori r11, r11, swapper_pg_dir@l
482 mtspr SPRN_PID, r9 /* TLB will have 0 TID */
485 /* Get the PGD for the current thread.
488 mfspr r11,SPRN_SPRG_THREAD
492 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
493 lwz r12, 0(r11) /* Get L1 entry */
494 andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
495 beq 2f /* Bail if no table */
497 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
498 lwz r11, 0(r12) /* Get Linux PTE */
499 andi. r9, r11, _PAGE_PRESENT
502 ori r11, r11, _PAGE_ACCESSED
505 /* Create TLB tag. This is the faulting address plus a static
506 * set of bits. These are size, valid, E, U0.
509 rlwimi r10, r12, 0, 20, 31
513 2: /* Check for possible large-page pmd entry */
514 rlwinm. r9, r12, 2, 22, 24
517 /* Create TLB tag. This is the faulting address, plus a static
518 * set of bits (valid, E, U0) plus the size from the PMD.
521 rlwimi r10, r9, 0, 20, 31
527 /* The bailout. Restore registers to pre-exception conditions
528 * and call the heavyweights to help us out.
538 mfspr r12, SPRN_SPRG_SCRATCH5
539 mfspr r11, SPRN_SPRG_SCRATCH6
542 mfspr r9, SPRN_SPRG_SCRATCH4
543 mfspr r12, SPRN_SPRG_SCRATCH3
545 mfspr r11, SPRN_SPRG_SCRATCH1
546 mfspr r10, SPRN_SPRG_SCRATCH0
549 /* 0x1200 - Instruction TLB Miss Exception
550 * Nearly the same as above, except we get our information from different
551 * registers and bailout to a different point.
553 START_EXCEPTION(0x1200, ITLBMiss)
554 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
555 mtspr SPRN_SPRG_SCRATCH1, r11
564 mtspr SPRN_SPRG_SCRATCH3, r12
565 mtspr SPRN_SPRG_SCRATCH4, r9
568 mtspr SPRN_SPRG_SCRATCH6, r11
569 mtspr SPRN_SPRG_SCRATCH5, r12
571 mfspr r10, SPRN_SRR0 /* Get faulting address */
573 /* If we are faulting a kernel address, we have to use the
574 * kernel page tables.
576 lis r11, PAGE_OFFSET@h
579 lis r11, swapper_pg_dir@h
580 ori r11, r11, swapper_pg_dir@l
582 mtspr SPRN_PID, r9 /* TLB will have 0 TID */
585 /* Get the PGD for the current thread.
588 mfspr r11,SPRN_SPRG_THREAD
592 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
593 lwz r12, 0(r11) /* Get L1 entry */
594 andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
595 beq 2f /* Bail if no table */
597 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
598 lwz r11, 0(r12) /* Get Linux PTE */
599 andi. r9, r11, _PAGE_PRESENT
602 ori r11, r11, _PAGE_ACCESSED
605 /* Create TLB tag. This is the faulting address plus a static
606 * set of bits. These are size, valid, E, U0.
609 rlwimi r10, r12, 0, 20, 31
613 2: /* Check for possible large-page pmd entry */
614 rlwinm. r9, r12, 2, 22, 24
617 /* Create TLB tag. This is the faulting address, plus a static
618 * set of bits (valid, E, U0) plus the size from the PMD.
621 rlwimi r10, r9, 0, 20, 31
627 /* The bailout. Restore registers to pre-exception conditions
628 * and call the heavyweights to help us out.
638 mfspr r12, SPRN_SPRG_SCRATCH5
639 mfspr r11, SPRN_SPRG_SCRATCH6
642 mfspr r9, SPRN_SPRG_SCRATCH4
643 mfspr r12, SPRN_SPRG_SCRATCH3
645 mfspr r11, SPRN_SPRG_SCRATCH1
646 mfspr r10, SPRN_SPRG_SCRATCH0
649 EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
650 EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
651 EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
652 EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
653 #ifdef CONFIG_IBM405_ERR51
654 /* 405GP errata 51 */
655 START_EXCEPTION(0x1700, Trap_17)
658 EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
660 EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
661 EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
662 EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
663 EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
664 EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
665 EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
666 EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
667 EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
669 /* Check for a single step debug exception while in an exception
670 * handler before state has been saved. This is to catch the case
671 * where an instruction that we are trying to single step causes
672 * an exception (eg ITLB/DTLB miss) and thus the first instruction of
673 * the exception handler generates a single step debug exception.
675 * If we get a debug trap on the first instruction of an exception handler,
676 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
677 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
678 * The exception handler was handling a non-critical interrupt, so it will
679 * save (and later restore) the MSR via SPRN_SRR1, which will still have
680 * the MSR_DE bit set.
682 /* 0x2000 - Debug Exception */
683 START_EXCEPTION(0x2000, DebugTrap)
684 CRITICAL_EXCEPTION_PROLOG
687 * If this is a single step or branch-taken exception in an
688 * exception entry sequence, it was probably meant to apply to
689 * the code where the exception occurred (since exception entry
690 * doesn't turn off DE automatically). We simulate the effect
691 * of turning off DE on entry to an exception handler by turning
692 * off DE in the SRR3 value and clearing the debug status.
694 mfspr r10,SPRN_DBSR /* check single-step/branch taken */
695 andis. r10,r10,DBSR_IC@h
698 andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */
699 beq 1f /* branch and fix it up */
701 mfspr r10,SPRN_SRR2 /* Faulting instruction address */
703 bgt+ 2f /* address above exception vectors */
705 /* here it looks like we got an inappropriate debug exception. */
706 1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */
707 lis r10,DBSR_IC@h /* clear the IC event */
709 /* restore state and get out */
718 lwz r10,crit_r10@l(0)
719 lwz r11,crit_r11@l(0)
724 /* continue normal handling for a critical exception... */
725 2: mfspr r4,SPRN_DBSR
726 addi r3,r1,STACK_FRAME_OVERHEAD
727 EXC_XFER_TEMPLATE(DebugException, 0x2002, \
728 (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
729 NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
731 /* Programmable Interval Timer (PIT) Exception. (from 0x1000) */
733 NORMAL_EXCEPTION_PROLOG
735 mtspr SPRN_TSR,r0 /* Clear the PIT exception */
736 addi r3,r1,STACK_FRAME_OVERHEAD
737 EXC_XFER_LITE(0x1000, timer_interrupt)
739 /* Fixed Interval Timer (FIT) Exception. (from 0x1010) */
741 NORMAL_EXCEPTION_PROLOG
742 addi r3,r1,STACK_FRAME_OVERHEAD;
743 EXC_XFER_EE(0x1010, unknown_exception)
745 /* Watchdog Timer (WDT) Exception. (from 0x1020) */
747 CRITICAL_EXCEPTION_PROLOG;
748 addi r3,r1,STACK_FRAME_OVERHEAD;
749 EXC_XFER_TEMPLATE(WatchdogException, 0x1020+2,
750 (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)),
751 NOCOPY, crit_transfer_to_handler,
755 * The other Data TLB exceptions bail out to this point
756 * if they can't resolve the lightweight TLB fault.
759 NORMAL_EXCEPTION_PROLOG
760 mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
762 mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
763 EXC_XFER_LITE(0x300, handle_page_fault)
765 /* Other PowerPC processors, namely those derived from the 6xx-series
766 * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
767 * However, for the 4xx-series processors these are neither defined nor
771 /* Damn, I came up one instruction too many to fit into the
772 * exception space :-). Both the instruction and data TLB
773 * miss get to this point to load the TLB.
774 * r10 - TLB_TAG value
776 * r12, r9 - available to use
777 * PID - loaded with proper value when we get here
778 * Upon exit, we reload everything and RFI.
779 * Actually, it will fit now, but oh well.....a common place
785 /* load the next available TLB index.
787 lwz r9, tlb_4xx_index@l(0)
789 andi. r9, r9, (PPC40X_TLB_SIZE-1)
790 stw r9, tlb_4xx_index@l(0)
794 * Clear out the software-only bits in the PTE to generate the
795 * TLB_DATA value. These are the bottom 2 bits of the RPM, the
796 * top 3 bits of the zone field, and M.
801 tlbwe r11, r9, TLB_DATA /* Load TLB LO */
802 tlbwe r10, r9, TLB_TAG /* Load TLB HI */
804 /* Done...restore registers and get out of here.
814 mfspr r12, SPRN_SPRG_SCRATCH5
815 mfspr r11, SPRN_SPRG_SCRATCH6
818 mfspr r9, SPRN_SPRG_SCRATCH4
819 mfspr r12, SPRN_SPRG_SCRATCH3
821 mfspr r11, SPRN_SPRG_SCRATCH1
822 mfspr r10, SPRN_SPRG_SCRATCH0
824 rfi /* Should sync shadow TLBs */
825 b . /* prevent prefetch past rfi */
827 /* This is where the main kernel code starts.
833 ori r2,r2,init_task@l
835 /* ptr to phys current thread */
837 addi r4,r4,THREAD /* init task's THREAD */
838 mtspr SPRN_SPRG_THREAD,r4
841 lis r1,init_thread_union@ha
842 addi r1,r1,init_thread_union@l
844 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
846 bl early_init /* We have to do this with MMU on */
849 * Decide what sort of machine this is and initialize the MMU.
856 /* Go back to running unmapped so we can load up new values
857 * and change to using our exception vectors.
858 * On the 4xx, all we have to do is invalidate the TLB to clear
859 * the old 16M byte TLB mappings.
864 lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
865 ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
869 b . /* prevent prefetch past rfi */
871 /* Load up the kernel context */
873 sync /* Flush to memory before changing TLB */
875 isync /* Flush shadow TLBs */
877 /* set up the PTE pointers for the Abatron bdiGDB.
879 lis r6, swapper_pg_dir@h
880 ori r6, r6, swapper_pg_dir@l
881 lis r5, abatron_pteptrs@h
882 ori r5, r5, abatron_pteptrs@l
883 stw r5, 0xf0(r0) /* Must match your Abatron config file */
887 /* Now turn on the MMU for real! */
889 ori r4,r4,MSR_KERNEL@l
890 lis r3,start_kernel@h
891 ori r3,r3,start_kernel@l
894 rfi /* enable MMU and jump to start_kernel */
895 b . /* prevent prefetch past rfi */
897 /* Set up the initial MMU state so we can do the first level of
898 * kernel initialization. This maps the first 16 MBytes of memory 1:1
899 * virtual to physical and more importantly sets the cache mode.
902 tlbia /* Invalidate all TLB entries */
905 /* We should still be executing code at physical address 0x0000xxxx
906 * at this point. However, start_here is at virtual address
907 * 0xC000xxxx. So, set up a TLB mapping to cover this once
908 * translation is enabled.
911 lis r3,KERNELBASE@h /* Load the kernel virtual address */
912 ori r3,r3,KERNELBASE@l
913 tophys(r4,r3) /* Load the kernel physical address */
915 iccci r0,r3 /* Invalidate the i-cache before use */
917 /* Load the kernel PID.
923 /* Configure and load one entry into TLB slots 63 */
924 clrrwi r4,r4,10 /* Mask off the real page number */
925 ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
927 clrrwi r3,r3,10 /* Mask off the effective page number */
928 ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
930 li r0,63 /* TLB slot 63 */
932 tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
933 tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
937 /* Establish the exception vector base
939 lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */
940 tophys(r0,r4) /* Use the physical address */
947 oris r13,r13,DBCR0_RST_SYSTEM@h
952 #ifdef CONFIG_BDI_SWITCH
953 /* Context switch the PTE pointer for the Abatron BDI2000.
954 * The PGDIR is the second parameter.
962 isync /* Need an isync to flush shadow */
963 /* TLBs after changing PID */
966 /* We put a few things here that have to be page-aligned. This stuff
967 * goes at the beginning of the data segment, which is page-aligned.
973 .globl empty_zero_page
976 EXPORT_SYMBOL(empty_zero_page)
977 .globl swapper_pg_dir
979 .space PGD_TABLE_SIZE
981 /* Room for two PTE pointers, usually the kernel and current user pointers
982 * to their respective root page table.