2 * This file is part of UBIFS.
4 * Copyright (C) 2006-2008 Nokia Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published by
8 * the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * You should have received a copy of the GNU General Public License along with
16 * this program; if not, write to the Free Software Foundation, Inc., 51
17 * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19 * Authors: Artem Bityutskiy (Битюцкий Артём)
24 * This file implements VFS file and inode operations for regular files, device
25 * nodes and symlinks as well as address space operations.
27 * UBIFS uses 2 page flags: @PG_private and @PG_checked. @PG_private is set if
28 * the page is dirty and is used for optimization purposes - dirty pages are
29 * not budgeted so the flag shows that 'ubifs_write_end()' should not release
30 * the budget for this page. The @PG_checked flag is set if full budgeting is
31 * required for the page e.g., when it corresponds to a file hole or it is
32 * beyond the file size. The budgeting is done in 'ubifs_write_begin()', because
33 * it is OK to fail in this function, and the budget is released in
34 * 'ubifs_write_end()'. So the @PG_private and @PG_checked flags carry
35 * information about how the page was budgeted, to make it possible to release
36 * the budget properly.
38 * A thing to keep in mind: inode @i_mutex is locked in most VFS operations we
39 * implement. However, this is not true for 'ubifs_writepage()', which may be
40 * called with @i_mutex unlocked. For example, when flusher thread is doing
41 * background write-back, it calls 'ubifs_writepage()' with unlocked @i_mutex.
42 * At "normal" work-paths the @i_mutex is locked in 'ubifs_writepage()', e.g.
43 * in the "sys_write -> alloc_pages -> direct reclaim path". So, in
44 * 'ubifs_writepage()' we are only guaranteed that the page is locked.
46 * Similarly, @i_mutex is not always locked in 'ubifs_readpage()', e.g., the
47 * read-ahead path does not lock it ("sys_read -> generic_file_aio_read ->
48 * ondemand_readahead -> readpage"). In case of readahead, @I_SYNC flag is not
49 * set as well. However, UBIFS disables readahead.
53 #include <linux/mount.h>
54 #include <linux/slab.h>
55 #include <linux/migrate.h>
57 static int read_block(struct inode *inode, void *addr, unsigned int block,
58 struct ubifs_data_node *dn)
60 struct ubifs_info *c = inode->i_sb->s_fs_info;
61 int err, len, out_len;
65 data_key_init(c, &key, inode->i_ino, block);
66 err = ubifs_tnc_lookup(c, &key, dn);
69 /* Not found, so it must be a hole */
70 memset(addr, 0, UBIFS_BLOCK_SIZE);
74 ubifs_assert(le64_to_cpu(dn->ch.sqnum) >
75 ubifs_inode(inode)->creat_sqnum);
76 len = le32_to_cpu(dn->size);
77 if (len <= 0 || len > UBIFS_BLOCK_SIZE)
80 dlen = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ;
81 out_len = UBIFS_BLOCK_SIZE;
82 err = ubifs_decompress(c, &dn->data, dlen, addr, &out_len,
83 le16_to_cpu(dn->compr_type));
84 if (err || len != out_len)
88 * Data length can be less than a full block, even for blocks that are
89 * not the last in the file (e.g., as a result of making a hole and
90 * appending data). Ensure that the remainder is zeroed out.
92 if (len < UBIFS_BLOCK_SIZE)
93 memset(addr + len, 0, UBIFS_BLOCK_SIZE - len);
98 ubifs_err(c, "bad data node (block %u, inode %lu)",
100 ubifs_dump_node(c, dn);
104 static int do_readpage(struct page *page)
108 unsigned int block, beyond;
109 struct ubifs_data_node *dn;
110 struct inode *inode = page->mapping->host;
111 loff_t i_size = i_size_read(inode);
113 dbg_gen("ino %lu, pg %lu, i_size %lld, flags %#lx",
114 inode->i_ino, page->index, i_size, page->flags);
115 ubifs_assert(!PageChecked(page));
116 ubifs_assert(!PagePrivate(page));
120 block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT;
121 beyond = (i_size + UBIFS_BLOCK_SIZE - 1) >> UBIFS_BLOCK_SHIFT;
122 if (block >= beyond) {
123 /* Reading beyond inode */
124 SetPageChecked(page);
125 memset(addr, 0, PAGE_SIZE);
129 dn = kmalloc(UBIFS_MAX_DATA_NODE_SZ, GFP_NOFS);
139 if (block >= beyond) {
140 /* Reading beyond inode */
142 memset(addr, 0, UBIFS_BLOCK_SIZE);
144 ret = read_block(inode, addr, block, dn);
149 } else if (block + 1 == beyond) {
150 int dlen = le32_to_cpu(dn->size);
151 int ilen = i_size & (UBIFS_BLOCK_SIZE - 1);
153 if (ilen && ilen < dlen)
154 memset(addr + ilen, 0, dlen - ilen);
157 if (++i >= UBIFS_BLOCKS_PER_PAGE)
160 addr += UBIFS_BLOCK_SIZE;
163 struct ubifs_info *c = inode->i_sb->s_fs_info;
164 if (err == -ENOENT) {
165 /* Not found, so it must be a hole */
166 SetPageChecked(page);
170 ubifs_err(c, "cannot read page %lu of inode %lu, error %d",
171 page->index, inode->i_ino, err);
178 SetPageUptodate(page);
179 ClearPageError(page);
180 flush_dcache_page(page);
186 ClearPageUptodate(page);
188 flush_dcache_page(page);
194 * release_new_page_budget - release budget of a new page.
195 * @c: UBIFS file-system description object
197 * This is a helper function which releases budget corresponding to the budget
198 * of one new page of data.
200 static void release_new_page_budget(struct ubifs_info *c)
202 struct ubifs_budget_req req = { .recalculate = 1, .new_page = 1 };
204 ubifs_release_budget(c, &req);
208 * release_existing_page_budget - release budget of an existing page.
209 * @c: UBIFS file-system description object
211 * This is a helper function which releases budget corresponding to the budget
212 * of changing one one page of data which already exists on the flash media.
214 static void release_existing_page_budget(struct ubifs_info *c)
216 struct ubifs_budget_req req = { .dd_growth = c->bi.page_budget};
218 ubifs_release_budget(c, &req);
221 static int write_begin_slow(struct address_space *mapping,
222 loff_t pos, unsigned len, struct page **pagep,
225 struct inode *inode = mapping->host;
226 struct ubifs_info *c = inode->i_sb->s_fs_info;
227 pgoff_t index = pos >> PAGE_SHIFT;
228 struct ubifs_budget_req req = { .new_page = 1 };
229 int uninitialized_var(err), appending = !!(pos + len > inode->i_size);
232 dbg_gen("ino %lu, pos %llu, len %u, i_size %lld",
233 inode->i_ino, pos, len, inode->i_size);
236 * At the slow path we have to budget before locking the page, because
237 * budgeting may force write-back, which would wait on locked pages and
238 * deadlock if we had the page locked. At this point we do not know
239 * anything about the page, so assume that this is a new page which is
240 * written to a hole. This corresponds to largest budget. Later the
241 * budget will be amended if this is not true.
244 /* We are appending data, budget for inode change */
247 err = ubifs_budget_space(c, &req);
251 page = grab_cache_page_write_begin(mapping, index, flags);
252 if (unlikely(!page)) {
253 ubifs_release_budget(c, &req);
257 if (!PageUptodate(page)) {
258 if (!(pos & ~PAGE_MASK) && len == PAGE_SIZE)
259 SetPageChecked(page);
261 err = do_readpage(page);
265 ubifs_release_budget(c, &req);
270 SetPageUptodate(page);
271 ClearPageError(page);
274 if (PagePrivate(page))
276 * The page is dirty, which means it was budgeted twice:
277 * o first time the budget was allocated by the task which
278 * made the page dirty and set the PG_private flag;
279 * o and then we budgeted for it for the second time at the
280 * very beginning of this function.
282 * So what we have to do is to release the page budget we
285 release_new_page_budget(c);
286 else if (!PageChecked(page))
288 * We are changing a page which already exists on the media.
289 * This means that changing the page does not make the amount
290 * of indexing information larger, and this part of the budget
291 * which we have already acquired may be released.
293 ubifs_convert_page_budget(c);
296 struct ubifs_inode *ui = ubifs_inode(inode);
299 * 'ubifs_write_end()' is optimized from the fast-path part of
300 * 'ubifs_write_begin()' and expects the @ui_mutex to be locked
301 * if data is appended.
303 mutex_lock(&ui->ui_mutex);
306 * The inode is dirty already, so we may free the
307 * budget we allocated.
309 ubifs_release_dirty_inode_budget(c, ui);
317 * allocate_budget - allocate budget for 'ubifs_write_begin()'.
318 * @c: UBIFS file-system description object
319 * @page: page to allocate budget for
320 * @ui: UBIFS inode object the page belongs to
321 * @appending: non-zero if the page is appended
323 * This is a helper function for 'ubifs_write_begin()' which allocates budget
324 * for the operation. The budget is allocated differently depending on whether
325 * this is appending, whether the page is dirty or not, and so on. This
326 * function leaves the @ui->ui_mutex locked in case of appending. Returns zero
327 * in case of success and %-ENOSPC in case of failure.
329 static int allocate_budget(struct ubifs_info *c, struct page *page,
330 struct ubifs_inode *ui, int appending)
332 struct ubifs_budget_req req = { .fast = 1 };
334 if (PagePrivate(page)) {
337 * The page is dirty and we are not appending, which
338 * means no budget is needed at all.
342 mutex_lock(&ui->ui_mutex);
345 * The page is dirty and we are appending, so the inode
346 * has to be marked as dirty. However, it is already
347 * dirty, so we do not need any budget. We may return,
348 * but @ui->ui_mutex hast to be left locked because we
349 * should prevent write-back from flushing the inode
350 * and freeing the budget. The lock will be released in
351 * 'ubifs_write_end()'.
356 * The page is dirty, we are appending, the inode is clean, so
357 * we need to budget the inode change.
361 if (PageChecked(page))
363 * The page corresponds to a hole and does not
364 * exist on the media. So changing it makes
365 * make the amount of indexing information
366 * larger, and we have to budget for a new
372 * Not a hole, the change will not add any new
373 * indexing information, budget for page
376 req.dirtied_page = 1;
379 mutex_lock(&ui->ui_mutex);
382 * The inode is clean but we will have to mark
383 * it as dirty because we are appending. This
390 return ubifs_budget_space(c, &req);
394 * This function is called when a page of data is going to be written. Since
395 * the page of data will not necessarily go to the flash straight away, UBIFS
396 * has to reserve space on the media for it, which is done by means of
399 * This is the hot-path of the file-system and we are trying to optimize it as
400 * much as possible. For this reasons it is split on 2 parts - slow and fast.
402 * There many budgeting cases:
403 * o a new page is appended - we have to budget for a new page and for
404 * changing the inode; however, if the inode is already dirty, there is
405 * no need to budget for it;
406 * o an existing clean page is changed - we have budget for it; if the page
407 * does not exist on the media (a hole), we have to budget for a new
408 * page; otherwise, we may budget for changing an existing page; the
409 * difference between these cases is that changing an existing page does
410 * not introduce anything new to the FS indexing information, so it does
411 * not grow, and smaller budget is acquired in this case;
412 * o an existing dirty page is changed - no need to budget at all, because
413 * the page budget has been acquired by earlier, when the page has been
416 * UBIFS budgeting sub-system may force write-back if it thinks there is no
417 * space to reserve. This imposes some locking restrictions and makes it
418 * impossible to take into account the above cases, and makes it impossible to
419 * optimize budgeting.
421 * The solution for this is that the fast path of 'ubifs_write_begin()' assumes
422 * there is a plenty of flash space and the budget will be acquired quickly,
423 * without forcing write-back. The slow path does not make this assumption.
425 static int ubifs_write_begin(struct file *file, struct address_space *mapping,
426 loff_t pos, unsigned len, unsigned flags,
427 struct page **pagep, void **fsdata)
429 struct inode *inode = mapping->host;
430 struct ubifs_info *c = inode->i_sb->s_fs_info;
431 struct ubifs_inode *ui = ubifs_inode(inode);
432 pgoff_t index = pos >> PAGE_SHIFT;
433 int uninitialized_var(err), appending = !!(pos + len > inode->i_size);
434 int skipped_read = 0;
437 ubifs_assert(ubifs_inode(inode)->ui_size == inode->i_size);
438 ubifs_assert(!c->ro_media && !c->ro_mount);
440 if (unlikely(c->ro_error))
443 /* Try out the fast-path part first */
444 page = grab_cache_page_write_begin(mapping, index, flags);
448 if (!PageUptodate(page)) {
449 /* The page is not loaded from the flash */
450 if (!(pos & ~PAGE_MASK) && len == PAGE_SIZE) {
452 * We change whole page so no need to load it. But we
453 * do not know whether this page exists on the media or
454 * not, so we assume the latter because it requires
455 * larger budget. The assumption is that it is better
456 * to budget a bit more than to read the page from the
457 * media. Thus, we are setting the @PG_checked flag
460 SetPageChecked(page);
463 err = do_readpage(page);
471 SetPageUptodate(page);
472 ClearPageError(page);
475 err = allocate_budget(c, page, ui, appending);
477 ubifs_assert(err == -ENOSPC);
479 * If we skipped reading the page because we were going to
480 * write all of it, then it is not up to date.
483 ClearPageChecked(page);
484 ClearPageUptodate(page);
487 * Budgeting failed which means it would have to force
488 * write-back but didn't, because we set the @fast flag in the
489 * request. Write-back cannot be done now, while we have the
490 * page locked, because it would deadlock. Unlock and free
491 * everything and fall-back to slow-path.
494 ubifs_assert(mutex_is_locked(&ui->ui_mutex));
495 mutex_unlock(&ui->ui_mutex);
500 return write_begin_slow(mapping, pos, len, pagep, flags);
504 * Whee, we acquired budgeting quickly - without involving
505 * garbage-collection, committing or forcing write-back. We return
506 * with @ui->ui_mutex locked if we are appending pages, and unlocked
507 * otherwise. This is an optimization (slightly hacky though).
515 * cancel_budget - cancel budget.
516 * @c: UBIFS file-system description object
517 * @page: page to cancel budget for
518 * @ui: UBIFS inode object the page belongs to
519 * @appending: non-zero if the page is appended
521 * This is a helper function for a page write operation. It unlocks the
522 * @ui->ui_mutex in case of appending.
524 static void cancel_budget(struct ubifs_info *c, struct page *page,
525 struct ubifs_inode *ui, int appending)
529 ubifs_release_dirty_inode_budget(c, ui);
530 mutex_unlock(&ui->ui_mutex);
532 if (!PagePrivate(page)) {
533 if (PageChecked(page))
534 release_new_page_budget(c);
536 release_existing_page_budget(c);
540 static int ubifs_write_end(struct file *file, struct address_space *mapping,
541 loff_t pos, unsigned len, unsigned copied,
542 struct page *page, void *fsdata)
544 struct inode *inode = mapping->host;
545 struct ubifs_inode *ui = ubifs_inode(inode);
546 struct ubifs_info *c = inode->i_sb->s_fs_info;
547 loff_t end_pos = pos + len;
548 int appending = !!(end_pos > inode->i_size);
550 dbg_gen("ino %lu, pos %llu, pg %lu, len %u, copied %d, i_size %lld",
551 inode->i_ino, pos, page->index, len, copied, inode->i_size);
553 if (unlikely(copied < len && len == PAGE_SIZE)) {
555 * VFS copied less data to the page that it intended and
556 * declared in its '->write_begin()' call via the @len
557 * argument. If the page was not up-to-date, and @len was
558 * @PAGE_SIZE, the 'ubifs_write_begin()' function did
559 * not load it from the media (for optimization reasons). This
560 * means that part of the page contains garbage. So read the
563 dbg_gen("copied %d instead of %d, read page and repeat",
565 cancel_budget(c, page, ui, appending);
566 ClearPageChecked(page);
569 * Return 0 to force VFS to repeat the whole operation, or the
570 * error code if 'do_readpage()' fails.
572 copied = do_readpage(page);
576 if (!PagePrivate(page)) {
577 SetPagePrivate(page);
578 atomic_long_inc(&c->dirty_pg_cnt);
579 __set_page_dirty_nobuffers(page);
583 i_size_write(inode, end_pos);
584 ui->ui_size = end_pos;
586 * Note, we do not set @I_DIRTY_PAGES (which means that the
587 * inode has dirty pages), this has been done in
588 * '__set_page_dirty_nobuffers()'.
590 __mark_inode_dirty(inode, I_DIRTY_DATASYNC);
591 ubifs_assert(mutex_is_locked(&ui->ui_mutex));
592 mutex_unlock(&ui->ui_mutex);
602 * populate_page - copy data nodes into a page for bulk-read.
603 * @c: UBIFS file-system description object
605 * @bu: bulk-read information
606 * @n: next zbranch slot
608 * This function returns %0 on success and a negative error code on failure.
610 static int populate_page(struct ubifs_info *c, struct page *page,
611 struct bu_info *bu, int *n)
613 int i = 0, nn = *n, offs = bu->zbranch[0].offs, hole = 0, read = 0;
614 struct inode *inode = page->mapping->host;
615 loff_t i_size = i_size_read(inode);
616 unsigned int page_block;
620 dbg_gen("ino %lu, pg %lu, i_size %lld, flags %#lx",
621 inode->i_ino, page->index, i_size, page->flags);
623 addr = zaddr = kmap(page);
625 end_index = (i_size - 1) >> PAGE_SHIFT;
626 if (!i_size || page->index > end_index) {
628 memset(addr, 0, PAGE_SIZE);
632 page_block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT;
634 int err, len, out_len, dlen;
638 memset(addr, 0, UBIFS_BLOCK_SIZE);
639 } else if (key_block(c, &bu->zbranch[nn].key) == page_block) {
640 struct ubifs_data_node *dn;
642 dn = bu->buf + (bu->zbranch[nn].offs - offs);
644 ubifs_assert(le64_to_cpu(dn->ch.sqnum) >
645 ubifs_inode(inode)->creat_sqnum);
647 len = le32_to_cpu(dn->size);
648 if (len <= 0 || len > UBIFS_BLOCK_SIZE)
651 dlen = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ;
652 out_len = UBIFS_BLOCK_SIZE;
653 err = ubifs_decompress(c, &dn->data, dlen, addr, &out_len,
654 le16_to_cpu(dn->compr_type));
655 if (err || len != out_len)
658 if (len < UBIFS_BLOCK_SIZE)
659 memset(addr + len, 0, UBIFS_BLOCK_SIZE - len);
662 read = (i << UBIFS_BLOCK_SHIFT) + len;
663 } else if (key_block(c, &bu->zbranch[nn].key) < page_block) {
668 memset(addr, 0, UBIFS_BLOCK_SIZE);
670 if (++i >= UBIFS_BLOCKS_PER_PAGE)
672 addr += UBIFS_BLOCK_SIZE;
676 if (end_index == page->index) {
677 int len = i_size & (PAGE_SIZE - 1);
679 if (len && len < read)
680 memset(zaddr + len, 0, read - len);
685 SetPageChecked(page);
689 SetPageUptodate(page);
690 ClearPageError(page);
691 flush_dcache_page(page);
697 ClearPageUptodate(page);
699 flush_dcache_page(page);
701 ubifs_err(c, "bad data node (block %u, inode %lu)",
702 page_block, inode->i_ino);
707 * ubifs_do_bulk_read - do bulk-read.
708 * @c: UBIFS file-system description object
709 * @bu: bulk-read information
710 * @page1: first page to read
712 * This function returns %1 if the bulk-read is done, otherwise %0 is returned.
714 static int ubifs_do_bulk_read(struct ubifs_info *c, struct bu_info *bu,
717 pgoff_t offset = page1->index, end_index;
718 struct address_space *mapping = page1->mapping;
719 struct inode *inode = mapping->host;
720 struct ubifs_inode *ui = ubifs_inode(inode);
721 int err, page_idx, page_cnt, ret = 0, n = 0;
722 int allocate = bu->buf ? 0 : 1;
724 gfp_t ra_gfp_mask = readahead_gfp_mask(mapping) & ~__GFP_FS;
726 err = ubifs_tnc_get_bu_keys(c, bu);
731 /* Turn off bulk-read at the end of the file */
732 ui->read_in_a_row = 1;
736 page_cnt = bu->blk_cnt >> UBIFS_BLOCKS_PER_PAGE_SHIFT;
739 * This happens when there are multiple blocks per page and the
740 * blocks for the first page we are looking for, are not
741 * together. If all the pages were like this, bulk-read would
742 * reduce performance, so we turn it off for a while.
750 * Allocate bulk-read buffer depending on how many data
751 * nodes we are going to read.
753 bu->buf_len = bu->zbranch[bu->cnt - 1].offs +
754 bu->zbranch[bu->cnt - 1].len -
756 ubifs_assert(bu->buf_len > 0);
757 ubifs_assert(bu->buf_len <= c->leb_size);
758 bu->buf = kmalloc(bu->buf_len, GFP_NOFS | __GFP_NOWARN);
763 err = ubifs_tnc_bulk_read(c, bu);
768 err = populate_page(c, page1, bu, &n);
775 isize = i_size_read(inode);
778 end_index = ((isize - 1) >> PAGE_SHIFT);
780 for (page_idx = 1; page_idx < page_cnt; page_idx++) {
781 pgoff_t page_offset = offset + page_idx;
784 if (page_offset > end_index)
786 page = pagecache_get_page(mapping, page_offset,
787 FGP_LOCK|FGP_ACCESSED|FGP_CREAT|FGP_NOWAIT,
791 if (!PageUptodate(page))
792 err = populate_page(c, page, bu, &n);
799 ui->last_page_read = offset + page_idx - 1;
807 ubifs_warn(c, "ignoring error %d and skipping bulk-read", err);
811 ui->read_in_a_row = ui->bulk_read = 0;
816 * ubifs_bulk_read - determine whether to bulk-read and, if so, do it.
817 * @page: page from which to start bulk-read.
819 * Some flash media are capable of reading sequentially at faster rates. UBIFS
820 * bulk-read facility is designed to take advantage of that, by reading in one
821 * go consecutive data nodes that are also located consecutively in the same
822 * LEB. This function returns %1 if a bulk-read is done and %0 otherwise.
824 static int ubifs_bulk_read(struct page *page)
826 struct inode *inode = page->mapping->host;
827 struct ubifs_info *c = inode->i_sb->s_fs_info;
828 struct ubifs_inode *ui = ubifs_inode(inode);
829 pgoff_t index = page->index, last_page_read = ui->last_page_read;
831 int err = 0, allocated = 0;
833 ui->last_page_read = index;
838 * Bulk-read is protected by @ui->ui_mutex, but it is an optimization,
839 * so don't bother if we cannot lock the mutex.
841 if (!mutex_trylock(&ui->ui_mutex))
844 if (index != last_page_read + 1) {
845 /* Turn off bulk-read if we stop reading sequentially */
846 ui->read_in_a_row = 1;
852 if (!ui->bulk_read) {
853 ui->read_in_a_row += 1;
854 if (ui->read_in_a_row < 3)
856 /* Three reads in a row, so switch on bulk-read */
861 * If possible, try to use pre-allocated bulk-read information, which
862 * is protected by @c->bu_mutex.
864 if (mutex_trylock(&c->bu_mutex))
867 bu = kmalloc(sizeof(struct bu_info), GFP_NOFS | __GFP_NOWARN);
875 bu->buf_len = c->max_bu_buf_len;
876 data_key_init(c, &bu->key, inode->i_ino,
877 page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT);
878 err = ubifs_do_bulk_read(c, bu, page);
881 mutex_unlock(&c->bu_mutex);
886 mutex_unlock(&ui->ui_mutex);
890 static int ubifs_readpage(struct file *file, struct page *page)
892 if (ubifs_bulk_read(page))
899 static int do_writepage(struct page *page, int len)
901 int err = 0, i, blen;
905 struct inode *inode = page->mapping->host;
906 struct ubifs_info *c = inode->i_sb->s_fs_info;
909 struct ubifs_inode *ui = ubifs_inode(inode);
910 spin_lock(&ui->ui_lock);
911 ubifs_assert(page->index <= ui->synced_i_size >> PAGE_SHIFT);
912 spin_unlock(&ui->ui_lock);
915 /* Update radix tree tags */
916 set_page_writeback(page);
919 block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT;
922 blen = min_t(int, len, UBIFS_BLOCK_SIZE);
923 data_key_init(c, &key, inode->i_ino, block);
924 err = ubifs_jnl_write_data(c, inode, &key, addr, blen);
927 if (++i >= UBIFS_BLOCKS_PER_PAGE)
935 ubifs_err(c, "cannot write page %lu of inode %lu, error %d",
936 page->index, inode->i_ino, err);
937 ubifs_ro_mode(c, err);
940 ubifs_assert(PagePrivate(page));
941 if (PageChecked(page))
942 release_new_page_budget(c);
944 release_existing_page_budget(c);
946 atomic_long_dec(&c->dirty_pg_cnt);
947 ClearPagePrivate(page);
948 ClearPageChecked(page);
952 end_page_writeback(page);
957 * When writing-back dirty inodes, VFS first writes-back pages belonging to the
958 * inode, then the inode itself. For UBIFS this may cause a problem. Consider a
959 * situation when a we have an inode with size 0, then a megabyte of data is
960 * appended to the inode, then write-back starts and flushes some amount of the
961 * dirty pages, the journal becomes full, commit happens and finishes, and then
962 * an unclean reboot happens. When the file system is mounted next time, the
963 * inode size would still be 0, but there would be many pages which are beyond
964 * the inode size, they would be indexed and consume flash space. Because the
965 * journal has been committed, the replay would not be able to detect this
966 * situation and correct the inode size. This means UBIFS would have to scan
967 * whole index and correct all inode sizes, which is long an unacceptable.
969 * To prevent situations like this, UBIFS writes pages back only if they are
970 * within the last synchronized inode size, i.e. the size which has been
971 * written to the flash media last time. Otherwise, UBIFS forces inode
972 * write-back, thus making sure the on-flash inode contains current inode size,
973 * and then keeps writing pages back.
975 * Some locking issues explanation. 'ubifs_writepage()' first is called with
976 * the page locked, and it locks @ui_mutex. However, write-back does take inode
977 * @i_mutex, which means other VFS operations may be run on this inode at the
978 * same time. And the problematic one is truncation to smaller size, from where
979 * we have to call 'truncate_setsize()', which first changes @inode->i_size,
980 * then drops the truncated pages. And while dropping the pages, it takes the
981 * page lock. This means that 'do_truncation()' cannot call 'truncate_setsize()'
982 * with @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'.
983 * This means that @inode->i_size is changed while @ui_mutex is unlocked.
985 * XXX(truncate): with the new truncate sequence this is not true anymore,
986 * and the calls to truncate_setsize can be move around freely. They should
987 * be moved to the very end of the truncate sequence.
989 * But in 'ubifs_writepage()' we have to guarantee that we do not write beyond
990 * inode size. How do we do this if @inode->i_size may became smaller while we
991 * are in the middle of 'ubifs_writepage()'? The UBIFS solution is the
992 * @ui->ui_isize "shadow" field which UBIFS uses instead of @inode->i_size
993 * internally and updates it under @ui_mutex.
995 * Q: why we do not worry that if we race with truncation, we may end up with a
996 * situation when the inode is truncated while we are in the middle of
997 * 'do_writepage()', so we do write beyond inode size?
998 * A: If we are in the middle of 'do_writepage()', truncation would be locked
999 * on the page lock and it would not write the truncated inode node to the
1000 * journal before we have finished.
1002 static int ubifs_writepage(struct page *page, struct writeback_control *wbc)
1004 struct inode *inode = page->mapping->host;
1005 struct ubifs_inode *ui = ubifs_inode(inode);
1006 loff_t i_size = i_size_read(inode), synced_i_size;
1007 pgoff_t end_index = i_size >> PAGE_SHIFT;
1008 int err, len = i_size & (PAGE_SIZE - 1);
1011 dbg_gen("ino %lu, pg %lu, pg flags %#lx",
1012 inode->i_ino, page->index, page->flags);
1013 ubifs_assert(PagePrivate(page));
1015 /* Is the page fully outside @i_size? (truncate in progress) */
1016 if (page->index > end_index || (page->index == end_index && !len)) {
1021 spin_lock(&ui->ui_lock);
1022 synced_i_size = ui->synced_i_size;
1023 spin_unlock(&ui->ui_lock);
1025 /* Is the page fully inside @i_size? */
1026 if (page->index < end_index) {
1027 if (page->index >= synced_i_size >> PAGE_SHIFT) {
1028 err = inode->i_sb->s_op->write_inode(inode, NULL);
1032 * The inode has been written, but the write-buffer has
1033 * not been synchronized, so in case of an unclean
1034 * reboot we may end up with some pages beyond inode
1035 * size, but they would be in the journal (because
1036 * commit flushes write buffers) and recovery would deal
1040 return do_writepage(page, PAGE_SIZE);
1044 * The page straddles @i_size. It must be zeroed out on each and every
1045 * writepage invocation because it may be mmapped. "A file is mapped
1046 * in multiples of the page size. For a file that is not a multiple of
1047 * the page size, the remaining memory is zeroed when mapped, and
1048 * writes to that region are not written out to the file."
1050 kaddr = kmap_atomic(page);
1051 memset(kaddr + len, 0, PAGE_SIZE - len);
1052 flush_dcache_page(page);
1053 kunmap_atomic(kaddr);
1055 if (i_size > synced_i_size) {
1056 err = inode->i_sb->s_op->write_inode(inode, NULL);
1061 return do_writepage(page, len);
1069 * do_attr_changes - change inode attributes.
1070 * @inode: inode to change attributes for
1071 * @attr: describes attributes to change
1073 static void do_attr_changes(struct inode *inode, const struct iattr *attr)
1075 if (attr->ia_valid & ATTR_UID)
1076 inode->i_uid = attr->ia_uid;
1077 if (attr->ia_valid & ATTR_GID)
1078 inode->i_gid = attr->ia_gid;
1079 if (attr->ia_valid & ATTR_ATIME)
1080 inode->i_atime = timespec_trunc(attr->ia_atime,
1081 inode->i_sb->s_time_gran);
1082 if (attr->ia_valid & ATTR_MTIME)
1083 inode->i_mtime = timespec_trunc(attr->ia_mtime,
1084 inode->i_sb->s_time_gran);
1085 if (attr->ia_valid & ATTR_CTIME)
1086 inode->i_ctime = timespec_trunc(attr->ia_ctime,
1087 inode->i_sb->s_time_gran);
1088 if (attr->ia_valid & ATTR_MODE) {
1089 umode_t mode = attr->ia_mode;
1091 if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
1093 inode->i_mode = mode;
1098 * do_truncation - truncate an inode.
1099 * @c: UBIFS file-system description object
1100 * @inode: inode to truncate
1101 * @attr: inode attribute changes description
1103 * This function implements VFS '->setattr()' call when the inode is truncated
1104 * to a smaller size. Returns zero in case of success and a negative error code
1105 * in case of failure.
1107 static int do_truncation(struct ubifs_info *c, struct inode *inode,
1108 const struct iattr *attr)
1111 struct ubifs_budget_req req;
1112 loff_t old_size = inode->i_size, new_size = attr->ia_size;
1113 int offset = new_size & (UBIFS_BLOCK_SIZE - 1), budgeted = 1;
1114 struct ubifs_inode *ui = ubifs_inode(inode);
1116 dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size);
1117 memset(&req, 0, sizeof(struct ubifs_budget_req));
1120 * If this is truncation to a smaller size, and we do not truncate on a
1121 * block boundary, budget for changing one data block, because the last
1122 * block will be re-written.
1124 if (new_size & (UBIFS_BLOCK_SIZE - 1))
1125 req.dirtied_page = 1;
1127 req.dirtied_ino = 1;
1128 /* A funny way to budget for truncation node */
1129 req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ;
1130 err = ubifs_budget_space(c, &req);
1133 * Treat truncations to zero as deletion and always allow them,
1134 * just like we do for '->unlink()'.
1136 if (new_size || err != -ENOSPC)
1141 truncate_setsize(inode, new_size);
1144 pgoff_t index = new_size >> PAGE_SHIFT;
1147 page = find_lock_page(inode->i_mapping, index);
1149 if (PageDirty(page)) {
1151 * 'ubifs_jnl_truncate()' will try to truncate
1152 * the last data node, but it contains
1153 * out-of-date data because the page is dirty.
1154 * Write the page now, so that
1155 * 'ubifs_jnl_truncate()' will see an already
1156 * truncated (and up to date) data node.
1158 ubifs_assert(PagePrivate(page));
1160 clear_page_dirty_for_io(page);
1161 if (UBIFS_BLOCKS_PER_PAGE_SHIFT)
1164 err = do_writepage(page, offset);
1169 * We could now tell 'ubifs_jnl_truncate()' not
1170 * to read the last block.
1174 * We could 'kmap()' the page and pass the data
1175 * to 'ubifs_jnl_truncate()' to save it from
1176 * having to read it.
1184 mutex_lock(&ui->ui_mutex);
1185 ui->ui_size = inode->i_size;
1186 /* Truncation changes inode [mc]time */
1187 inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
1188 /* Other attributes may be changed at the same time as well */
1189 do_attr_changes(inode, attr);
1190 err = ubifs_jnl_truncate(c, inode, old_size, new_size);
1191 mutex_unlock(&ui->ui_mutex);
1195 ubifs_release_budget(c, &req);
1197 c->bi.nospace = c->bi.nospace_rp = 0;
1204 * do_setattr - change inode attributes.
1205 * @c: UBIFS file-system description object
1206 * @inode: inode to change attributes for
1207 * @attr: inode attribute changes description
1209 * This function implements VFS '->setattr()' call for all cases except
1210 * truncations to smaller size. Returns zero in case of success and a negative
1211 * error code in case of failure.
1213 static int do_setattr(struct ubifs_info *c, struct inode *inode,
1214 const struct iattr *attr)
1217 loff_t new_size = attr->ia_size;
1218 struct ubifs_inode *ui = ubifs_inode(inode);
1219 struct ubifs_budget_req req = { .dirtied_ino = 1,
1220 .dirtied_ino_d = ALIGN(ui->data_len, 8) };
1222 err = ubifs_budget_space(c, &req);
1226 if (attr->ia_valid & ATTR_SIZE) {
1227 dbg_gen("size %lld -> %lld", inode->i_size, new_size);
1228 truncate_setsize(inode, new_size);
1231 mutex_lock(&ui->ui_mutex);
1232 if (attr->ia_valid & ATTR_SIZE) {
1233 /* Truncation changes inode [mc]time */
1234 inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
1235 /* 'truncate_setsize()' changed @i_size, update @ui_size */
1236 ui->ui_size = inode->i_size;
1239 do_attr_changes(inode, attr);
1241 release = ui->dirty;
1242 if (attr->ia_valid & ATTR_SIZE)
1244 * Inode length changed, so we have to make sure
1245 * @I_DIRTY_DATASYNC is set.
1247 __mark_inode_dirty(inode, I_DIRTY_SYNC | I_DIRTY_DATASYNC);
1249 mark_inode_dirty_sync(inode);
1250 mutex_unlock(&ui->ui_mutex);
1253 ubifs_release_budget(c, &req);
1255 err = inode->i_sb->s_op->write_inode(inode, NULL);
1259 int ubifs_setattr(struct dentry *dentry, struct iattr *attr)
1262 struct inode *inode = d_inode(dentry);
1263 struct ubifs_info *c = inode->i_sb->s_fs_info;
1265 dbg_gen("ino %lu, mode %#x, ia_valid %#x",
1266 inode->i_ino, inode->i_mode, attr->ia_valid);
1267 err = setattr_prepare(dentry, attr);
1271 err = dbg_check_synced_i_size(c, inode);
1275 if ((attr->ia_valid & ATTR_SIZE) && attr->ia_size < inode->i_size)
1276 /* Truncation to a smaller size */
1277 err = do_truncation(c, inode, attr);
1279 err = do_setattr(c, inode, attr);
1284 static void ubifs_invalidatepage(struct page *page, unsigned int offset,
1285 unsigned int length)
1287 struct inode *inode = page->mapping->host;
1288 struct ubifs_info *c = inode->i_sb->s_fs_info;
1290 ubifs_assert(PagePrivate(page));
1291 if (offset || length < PAGE_SIZE)
1292 /* Partial page remains dirty */
1295 if (PageChecked(page))
1296 release_new_page_budget(c);
1298 release_existing_page_budget(c);
1300 atomic_long_dec(&c->dirty_pg_cnt);
1301 ClearPagePrivate(page);
1302 ClearPageChecked(page);
1305 int ubifs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
1307 struct inode *inode = file->f_mapping->host;
1308 struct ubifs_info *c = inode->i_sb->s_fs_info;
1311 dbg_gen("syncing inode %lu", inode->i_ino);
1315 * For some really strange reasons VFS does not filter out
1316 * 'fsync()' for R/O mounted file-systems as per 2.6.39.
1320 err = filemap_write_and_wait_range(inode->i_mapping, start, end);
1325 /* Synchronize the inode unless this is a 'datasync()' call. */
1326 if (!datasync || (inode->i_state & I_DIRTY_DATASYNC)) {
1327 err = inode->i_sb->s_op->write_inode(inode, NULL);
1333 * Nodes related to this inode may still sit in a write-buffer. Flush
1336 err = ubifs_sync_wbufs_by_inode(c, inode);
1338 inode_unlock(inode);
1343 * mctime_update_needed - check if mtime or ctime update is needed.
1344 * @inode: the inode to do the check for
1345 * @now: current time
1347 * This helper function checks if the inode mtime/ctime should be updated or
1348 * not. If current values of the time-stamps are within the UBIFS inode time
1349 * granularity, they are not updated. This is an optimization.
1351 static inline int mctime_update_needed(const struct inode *inode,
1352 const struct timespec *now)
1354 if (!timespec_equal(&inode->i_mtime, now) ||
1355 !timespec_equal(&inode->i_ctime, now))
1360 #ifdef CONFIG_UBIFS_ATIME_SUPPORT
1362 * ubifs_update_time - update time of inode.
1363 * @inode: inode to update
1365 * This function updates time of the inode.
1367 int ubifs_update_time(struct inode *inode, struct timespec *time,
1370 struct ubifs_inode *ui = ubifs_inode(inode);
1371 struct ubifs_info *c = inode->i_sb->s_fs_info;
1372 struct ubifs_budget_req req = { .dirtied_ino = 1,
1373 .dirtied_ino_d = ALIGN(ui->data_len, 8) };
1374 int iflags = I_DIRTY_TIME;
1377 err = ubifs_budget_space(c, &req);
1381 mutex_lock(&ui->ui_mutex);
1382 if (flags & S_ATIME)
1383 inode->i_atime = *time;
1384 if (flags & S_CTIME)
1385 inode->i_ctime = *time;
1386 if (flags & S_MTIME)
1387 inode->i_mtime = *time;
1389 if (!(inode->i_sb->s_flags & MS_LAZYTIME))
1390 iflags |= I_DIRTY_SYNC;
1392 release = ui->dirty;
1393 __mark_inode_dirty(inode, iflags);
1394 mutex_unlock(&ui->ui_mutex);
1396 ubifs_release_budget(c, &req);
1402 * update_mctime - update mtime and ctime of an inode.
1403 * @inode: inode to update
1405 * This function updates mtime and ctime of the inode if it is not equivalent to
1406 * current time. Returns zero in case of success and a negative error code in
1409 static int update_mctime(struct inode *inode)
1411 struct timespec now = ubifs_current_time(inode);
1412 struct ubifs_inode *ui = ubifs_inode(inode);
1413 struct ubifs_info *c = inode->i_sb->s_fs_info;
1415 if (mctime_update_needed(inode, &now)) {
1417 struct ubifs_budget_req req = { .dirtied_ino = 1,
1418 .dirtied_ino_d = ALIGN(ui->data_len, 8) };
1420 err = ubifs_budget_space(c, &req);
1424 mutex_lock(&ui->ui_mutex);
1425 inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
1426 release = ui->dirty;
1427 mark_inode_dirty_sync(inode);
1428 mutex_unlock(&ui->ui_mutex);
1430 ubifs_release_budget(c, &req);
1436 static ssize_t ubifs_write_iter(struct kiocb *iocb, struct iov_iter *from)
1438 int err = update_mctime(file_inode(iocb->ki_filp));
1442 return generic_file_write_iter(iocb, from);
1445 static int ubifs_set_page_dirty(struct page *page)
1449 ret = __set_page_dirty_nobuffers(page);
1451 * An attempt to dirty a page without budgeting for it - should not
1454 ubifs_assert(ret == 0);
1458 #ifdef CONFIG_MIGRATION
1459 static int ubifs_migrate_page(struct address_space *mapping,
1460 struct page *newpage, struct page *page, enum migrate_mode mode)
1464 rc = migrate_page_move_mapping(mapping, newpage, page, NULL, mode, 0);
1465 if (rc != MIGRATEPAGE_SUCCESS)
1468 if (PagePrivate(page)) {
1469 ClearPagePrivate(page);
1470 SetPagePrivate(newpage);
1473 migrate_page_copy(newpage, page);
1474 return MIGRATEPAGE_SUCCESS;
1478 static int ubifs_releasepage(struct page *page, gfp_t unused_gfp_flags)
1481 * An attempt to release a dirty page without budgeting for it - should
1484 if (PageWriteback(page))
1486 ubifs_assert(PagePrivate(page));
1488 ClearPagePrivate(page);
1489 ClearPageChecked(page);
1494 * mmap()d file has taken write protection fault and is being made writable.
1495 * UBIFS must ensure page is budgeted for.
1497 static int ubifs_vm_page_mkwrite(struct vm_area_struct *vma,
1498 struct vm_fault *vmf)
1500 struct page *page = vmf->page;
1501 struct inode *inode = file_inode(vma->vm_file);
1502 struct ubifs_info *c = inode->i_sb->s_fs_info;
1503 struct timespec now = ubifs_current_time(inode);
1504 struct ubifs_budget_req req = { .new_page = 1 };
1505 int err, update_time;
1507 dbg_gen("ino %lu, pg %lu, i_size %lld", inode->i_ino, page->index,
1508 i_size_read(inode));
1509 ubifs_assert(!c->ro_media && !c->ro_mount);
1511 if (unlikely(c->ro_error))
1512 return VM_FAULT_SIGBUS; /* -EROFS */
1515 * We have not locked @page so far so we may budget for changing the
1516 * page. Note, we cannot do this after we locked the page, because
1517 * budgeting may cause write-back which would cause deadlock.
1519 * At the moment we do not know whether the page is dirty or not, so we
1520 * assume that it is not and budget for a new page. We could look at
1521 * the @PG_private flag and figure this out, but we may race with write
1522 * back and the page state may change by the time we lock it, so this
1523 * would need additional care. We do not bother with this at the
1524 * moment, although it might be good idea to do. Instead, we allocate
1525 * budget for a new page and amend it later on if the page was in fact
1528 * The budgeting-related logic of this function is similar to what we
1529 * do in 'ubifs_write_begin()' and 'ubifs_write_end()'. Glance there
1530 * for more comments.
1532 update_time = mctime_update_needed(inode, &now);
1535 * We have to change inode time stamp which requires extra
1538 req.dirtied_ino = 1;
1540 err = ubifs_budget_space(c, &req);
1541 if (unlikely(err)) {
1543 ubifs_warn(c, "out of space for mmapped file (inode number %lu)",
1545 return VM_FAULT_SIGBUS;
1549 if (unlikely(page->mapping != inode->i_mapping ||
1550 page_offset(page) > i_size_read(inode))) {
1551 /* Page got truncated out from underneath us */
1556 if (PagePrivate(page))
1557 release_new_page_budget(c);
1559 if (!PageChecked(page))
1560 ubifs_convert_page_budget(c);
1561 SetPagePrivate(page);
1562 atomic_long_inc(&c->dirty_pg_cnt);
1563 __set_page_dirty_nobuffers(page);
1568 struct ubifs_inode *ui = ubifs_inode(inode);
1570 mutex_lock(&ui->ui_mutex);
1571 inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
1572 release = ui->dirty;
1573 mark_inode_dirty_sync(inode);
1574 mutex_unlock(&ui->ui_mutex);
1576 ubifs_release_dirty_inode_budget(c, ui);
1579 wait_for_stable_page(page);
1580 return VM_FAULT_LOCKED;
1584 ubifs_release_budget(c, &req);
1586 err = VM_FAULT_SIGBUS;
1590 static const struct vm_operations_struct ubifs_file_vm_ops = {
1591 .fault = filemap_fault,
1592 .map_pages = filemap_map_pages,
1593 .page_mkwrite = ubifs_vm_page_mkwrite,
1596 static int ubifs_file_mmap(struct file *file, struct vm_area_struct *vma)
1600 err = generic_file_mmap(file, vma);
1603 vma->vm_ops = &ubifs_file_vm_ops;
1604 #ifdef CONFIG_UBIFS_ATIME_SUPPORT
1605 file_accessed(file);
1610 const struct address_space_operations ubifs_file_address_operations = {
1611 .readpage = ubifs_readpage,
1612 .writepage = ubifs_writepage,
1613 .write_begin = ubifs_write_begin,
1614 .write_end = ubifs_write_end,
1615 .invalidatepage = ubifs_invalidatepage,
1616 .set_page_dirty = ubifs_set_page_dirty,
1617 #ifdef CONFIG_MIGRATION
1618 .migratepage = ubifs_migrate_page,
1620 .releasepage = ubifs_releasepage,
1623 const struct inode_operations ubifs_file_inode_operations = {
1624 .setattr = ubifs_setattr,
1625 .getattr = ubifs_getattr,
1626 .listxattr = ubifs_listxattr,
1627 #ifdef CONFIG_UBIFS_ATIME_SUPPORT
1628 .update_time = ubifs_update_time,
1632 const struct inode_operations ubifs_symlink_inode_operations = {
1633 .readlink = generic_readlink,
1634 .get_link = simple_get_link,
1635 .setattr = ubifs_setattr,
1636 .getattr = ubifs_getattr,
1637 .listxattr = ubifs_listxattr,
1638 #ifdef CONFIG_UBIFS_ATIME_SUPPORT
1639 .update_time = ubifs_update_time,
1643 const struct file_operations ubifs_file_operations = {
1644 .llseek = generic_file_llseek,
1645 .read_iter = generic_file_read_iter,
1646 .write_iter = ubifs_write_iter,
1647 .mmap = ubifs_file_mmap,
1648 .fsync = ubifs_fsync,
1649 .unlocked_ioctl = ubifs_ioctl,
1650 .splice_read = generic_file_splice_read,
1651 .splice_write = iter_file_splice_write,
1652 #ifdef CONFIG_COMPAT
1653 .compat_ioctl = ubifs_compat_ioctl,