1 // SPDX-License-Identifier: GPL-2.0-only
3 * Elantech Touchpad driver (v6)
5 * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
7 * Trademarks are the property of their respective owners.
10 #include <linux/delay.h>
11 #include <linux/dmi.h>
12 #include <linux/slab.h>
13 #include <linux/module.h>
14 #include <linux/i2c.h>
15 #include <linux/input.h>
16 #include <linux/input/mt.h>
17 #include <linux/platform_device.h>
18 #include <linux/serio.h>
19 #include <linux/libps2.h>
20 #include <asm/unaligned.h>
25 #define elantech_debug(fmt, ...) \
27 if (etd->info.debug) \
28 psmouse_printk(KERN_DEBUG, psmouse, \
29 fmt, ##__VA_ARGS__); \
33 * Send a Synaptics style sliced query command
35 static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c,
38 if (ps2_sliced_command(&psmouse->ps2dev, c) ||
39 ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
40 psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c);
48 * V3 and later support this fast command
50 static int elantech_send_cmd(struct psmouse *psmouse, unsigned char c,
53 struct ps2dev *ps2dev = &psmouse->ps2dev;
55 if (ps2_command(ps2dev, NULL, ETP_PS2_CUSTOM_COMMAND) ||
56 ps2_command(ps2dev, NULL, c) ||
57 ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
58 psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c);
66 * A retrying version of ps2_command
68 static int elantech_ps2_command(struct psmouse *psmouse,
69 unsigned char *param, int command)
71 struct ps2dev *ps2dev = &psmouse->ps2dev;
72 struct elantech_data *etd = psmouse->private;
74 int tries = ETP_PS2_COMMAND_TRIES;
77 rc = ps2_command(ps2dev, param, command);
81 elantech_debug("retrying ps2 command 0x%02x (%d).\n",
83 msleep(ETP_PS2_COMMAND_DELAY);
87 psmouse_err(psmouse, "ps2 command 0x%02x failed.\n", command);
93 * Send an Elantech style special command to read 3 bytes from a register
95 static int elantech_read_reg_params(struct psmouse *psmouse, u8 reg, u8 *param)
97 if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
98 elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
99 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
100 elantech_ps2_command(psmouse, NULL, reg) ||
101 elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
103 "failed to read register %#02x\n", reg);
111 * Send an Elantech style special command to write a register with a parameter
113 static int elantech_write_reg_params(struct psmouse *psmouse, u8 reg, u8 *param)
115 if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
116 elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
117 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
118 elantech_ps2_command(psmouse, NULL, reg) ||
119 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
120 elantech_ps2_command(psmouse, NULL, param[0]) ||
121 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
122 elantech_ps2_command(psmouse, NULL, param[1]) ||
123 elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
125 "failed to write register %#02x with value %#02x%#02x\n",
126 reg, param[0], param[1]);
134 * Send an Elantech style special command to read a value from a register
136 static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
139 struct elantech_data *etd = psmouse->private;
140 unsigned char param[3];
143 if (reg < 0x07 || reg > 0x26)
146 if (reg > 0x11 && reg < 0x20)
149 switch (etd->info.hw_version) {
151 if (ps2_sliced_command(&psmouse->ps2dev, ETP_REGISTER_READ) ||
152 ps2_sliced_command(&psmouse->ps2dev, reg) ||
153 ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
159 if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
160 elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READ) ||
161 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
162 elantech_ps2_command(psmouse, NULL, reg) ||
163 elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
169 if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
170 elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
171 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
172 elantech_ps2_command(psmouse, NULL, reg) ||
173 elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
180 psmouse_err(psmouse, "failed to read register 0x%02x.\n", reg);
181 else if (etd->info.hw_version != 4)
190 * Send an Elantech style special command to write a register with a value
192 static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
195 struct elantech_data *etd = psmouse->private;
198 if (reg < 0x07 || reg > 0x26)
201 if (reg > 0x11 && reg < 0x20)
204 switch (etd->info.hw_version) {
206 if (ps2_sliced_command(&psmouse->ps2dev, ETP_REGISTER_WRITE) ||
207 ps2_sliced_command(&psmouse->ps2dev, reg) ||
208 ps2_sliced_command(&psmouse->ps2dev, val) ||
209 ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) {
215 if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
216 elantech_ps2_command(psmouse, NULL, ETP_REGISTER_WRITE) ||
217 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
218 elantech_ps2_command(psmouse, NULL, reg) ||
219 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
220 elantech_ps2_command(psmouse, NULL, val) ||
221 elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
227 if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
228 elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
229 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
230 elantech_ps2_command(psmouse, NULL, reg) ||
231 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
232 elantech_ps2_command(psmouse, NULL, val) ||
233 elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
239 if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
240 elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
241 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
242 elantech_ps2_command(psmouse, NULL, reg) ||
243 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
244 elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
245 elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
246 elantech_ps2_command(psmouse, NULL, val) ||
247 elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
255 "failed to write register 0x%02x with value 0x%02x.\n",
262 * Dump a complete mouse movement packet to the syslog
264 static void elantech_packet_dump(struct psmouse *psmouse)
266 psmouse_printk(KERN_DEBUG, psmouse, "PS/2 packet [%*ph]\n",
267 psmouse->pktsize, psmouse->packet);
271 * Advertise INPUT_PROP_BUTTONPAD for clickpads. The testing of bit 12 in
272 * fw_version for this is based on the following fw_version & caps table:
274 * Laptop-model: fw_version: caps: buttons:
275 * Acer S3 0x461f00 10, 13, 0e clickpad
276 * Acer S7-392 0x581f01 50, 17, 0d clickpad
277 * Acer V5-131 0x461f02 01, 16, 0c clickpad
278 * Acer V5-551 0x461f00 ? clickpad
279 * Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons
280 * Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons
281 * Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons
282 * Asus TP500LN 0x381f17 10, 14, 0e clickpad
283 * Asus X750JN 0x381f17 10, 14, 0e clickpad
284 * Asus UX31 0x361f00 20, 15, 0e clickpad
285 * Asus UX32VD 0x361f02 00, 15, 0e clickpad
286 * Avatar AVIU-145A2 0x361f00 ? clickpad
287 * Fujitsu CELSIUS H760 0x570f02 40, 14, 0c 3 hw buttons (**)
288 * Fujitsu CELSIUS H780 0x5d0f02 41, 16, 0d 3 hw buttons (**)
289 * Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons
290 * Fujitsu LIFEBOOK E546 0x470f00 50, 12, 09 2 hw buttons
291 * Fujitsu LIFEBOOK E547 0x470f00 50, 12, 09 2 hw buttons
292 * Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons
293 * Fujitsu LIFEBOOK E557 0x570f01 40, 14, 0c 2 hw buttons
294 * Fujitsu T725 0x470f01 05, 12, 09 2 hw buttons
295 * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**)
296 * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons
297 * Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*)
298 * Lenovo L530 0x350f02 b9, 15, 0c 2 hw buttons (*)
299 * Samsung NF210 0x150b00 78, 14, 0a 2 hw buttons
300 * Samsung NP770Z5E 0x575f01 10, 15, 0f clickpad
301 * Samsung NP700Z5B 0x361f06 21, 15, 0f clickpad
302 * Samsung NP900X3E-A02 0x575f03 ? clickpad
303 * Samsung NP-QX410 0x851b00 19, 14, 0c clickpad
304 * Samsung RC512 0x450f00 08, 15, 0c 2 hw buttons
305 * Samsung RF710 0x450f00 ? 2 hw buttons
306 * System76 Pangolin 0x250f01 ? 2 hw buttons
307 * (*) + 3 trackpoint buttons
308 * (**) + 0 trackpoint buttons
309 * Note: Lenovo L430 and Lenovo L530 have the same fw_version/caps
311 static inline int elantech_is_buttonpad(struct elantech_device_info *info)
313 return info->fw_version & 0x001000;
317 * Interpret complete data packets and report absolute mode input events for
318 * hardware version 1. (4 byte packets)
320 static void elantech_report_absolute_v1(struct psmouse *psmouse)
322 struct input_dev *dev = psmouse->dev;
323 struct elantech_data *etd = psmouse->private;
324 unsigned char *packet = psmouse->packet;
327 if (etd->info.fw_version < 0x020000) {
329 * byte 0: D U p1 p2 1 p3 R L
330 * byte 1: f 0 th tw x9 x8 y9 y8
332 fingers = ((packet[1] & 0x80) >> 7) +
333 ((packet[1] & 0x30) >> 4);
336 * byte 0: n1 n0 p2 p1 1 p3 R L
337 * byte 1: 0 0 0 0 x9 x8 y9 y8
339 fingers = (packet[0] & 0xc0) >> 6;
342 if (etd->info.jumpy_cursor) {
344 etd->single_finger_reports = 0;
345 } else if (etd->single_finger_reports < 2) {
346 /* Discard first 2 reports of one finger, bogus */
347 etd->single_finger_reports++;
348 elantech_debug("discarding packet\n");
353 input_report_key(dev, BTN_TOUCH, fingers != 0);
356 * byte 2: x7 x6 x5 x4 x3 x2 x1 x0
357 * byte 3: y7 y6 y5 y4 y3 y2 y1 y0
360 input_report_abs(dev, ABS_X,
361 ((packet[1] & 0x0c) << 6) | packet[2]);
362 input_report_abs(dev, ABS_Y,
363 etd->y_max - (((packet[1] & 0x03) << 8) | packet[3]));
366 input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
367 input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
368 input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
370 psmouse_report_standard_buttons(dev, packet[0]);
372 if (etd->info.fw_version < 0x020000 &&
373 (etd->info.capabilities[0] & ETP_CAP_HAS_ROCKER)) {
375 input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);
377 input_report_key(dev, BTN_BACK, packet[0] & 0x80);
383 static void elantech_set_slot(struct input_dev *dev, int slot, bool active,
384 unsigned int x, unsigned int y)
386 input_mt_slot(dev, slot);
387 input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
389 input_report_abs(dev, ABS_MT_POSITION_X, x);
390 input_report_abs(dev, ABS_MT_POSITION_Y, y);
394 /* x1 < x2 and y1 < y2 when two fingers, x = y = 0 when not pressed */
395 static void elantech_report_semi_mt_data(struct input_dev *dev,
396 unsigned int num_fingers,
397 unsigned int x1, unsigned int y1,
398 unsigned int x2, unsigned int y2)
400 elantech_set_slot(dev, 0, num_fingers != 0, x1, y1);
401 elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2);
405 * Interpret complete data packets and report absolute mode input events for
406 * hardware version 2. (6 byte packets)
408 static void elantech_report_absolute_v2(struct psmouse *psmouse)
410 struct elantech_data *etd = psmouse->private;
411 struct input_dev *dev = psmouse->dev;
412 unsigned char *packet = psmouse->packet;
413 unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
414 unsigned int width = 0, pres = 0;
416 /* byte 0: n1 n0 . . . . R L */
417 fingers = (packet[0] & 0xc0) >> 6;
422 * Same as one finger, except report of more than 3 fingers:
423 * byte 3: n4 . w1 w0 . . . .
425 if (packet[3] & 0x80)
430 * byte 1: . . . . x11 x10 x9 x8
431 * byte 2: x7 x6 x5 x4 x4 x2 x1 x0
433 x1 = ((packet[1] & 0x0f) << 8) | packet[2];
435 * byte 4: . . . . y11 y10 y9 y8
436 * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
438 y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
440 pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
441 width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
446 * The coordinate of each finger is reported separately
447 * with a lower resolution for two finger touches:
448 * byte 0: . . ay8 ax8 . . . .
449 * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
451 x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2;
452 /* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
454 ((((packet[0] & 0x20) << 3) | packet[2]) << 2);
456 * byte 3: . . by8 bx8 . . . .
457 * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
459 x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2;
460 /* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
462 ((((packet[3] & 0x20) << 3) | packet[5]) << 2);
464 /* Unknown so just report sensible values */
470 input_report_key(dev, BTN_TOUCH, fingers != 0);
472 input_report_abs(dev, ABS_X, x1);
473 input_report_abs(dev, ABS_Y, y1);
475 elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
476 input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
477 input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
478 input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
479 input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
480 psmouse_report_standard_buttons(dev, packet[0]);
481 if (etd->info.reports_pressure) {
482 input_report_abs(dev, ABS_PRESSURE, pres);
483 input_report_abs(dev, ABS_TOOL_WIDTH, width);
489 static void elantech_report_trackpoint(struct psmouse *psmouse,
493 * byte 0: 0 0 sx sy 0 M R L
494 * byte 1:~sx 0 0 0 0 0 0 0
495 * byte 2:~sy 0 0 0 0 0 0 0
496 * byte 3: 0 0 ~sy ~sx 0 1 1 0
497 * byte 4: x7 x6 x5 x4 x3 x2 x1 x0
498 * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
500 * x and y are written in two's complement spread
501 * over 9 bits with sx/sy the relative top bit and
502 * x7..x0 and y7..y0 the lower bits.
503 * The sign of y is opposite to what the input driver
504 * expects for a relative movement
507 struct elantech_data *etd = psmouse->private;
508 struct input_dev *tp_dev = etd->tp_dev;
509 unsigned char *packet = psmouse->packet;
513 t = get_unaligned_le32(&packet[0]);
522 * This firmware misreport coordinates for trackpoint
523 * occasionally. Discard packets outside of [-127, 127] range
524 * to prevent cursor jumps.
526 if (packet[4] == 0x80 || packet[5] == 0x80 ||
527 packet[1] >> 7 == packet[4] >> 7 ||
528 packet[2] >> 7 == packet[5] >> 7) {
529 elantech_debug("discarding packet [%6ph]\n", packet);
533 x = packet[4] - (int)((packet[1]^0x80) << 1);
534 y = (int)((packet[2]^0x80) << 1) - packet[5];
536 psmouse_report_standard_buttons(tp_dev, packet[0]);
538 input_report_rel(tp_dev, REL_X, x);
539 input_report_rel(tp_dev, REL_Y, y);
546 /* Dump unexpected packet sequences if debug=1 (default) */
547 if (etd->info.debug == 1)
548 elantech_packet_dump(psmouse);
555 * Interpret complete data packets and report absolute mode input events for
556 * hardware version 3. (12 byte packets for two fingers)
558 static void elantech_report_absolute_v3(struct psmouse *psmouse,
561 struct input_dev *dev = psmouse->dev;
562 struct elantech_data *etd = psmouse->private;
563 unsigned char *packet = psmouse->packet;
564 unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
565 unsigned int width = 0, pres = 0;
567 /* byte 0: n1 n0 . . . . R L */
568 fingers = (packet[0] & 0xc0) >> 6;
574 * byte 1: . . . . x11 x10 x9 x8
575 * byte 2: x7 x6 x5 x4 x4 x2 x1 x0
577 x1 = ((packet[1] & 0x0f) << 8) | packet[2];
579 * byte 4: . . . . y11 y10 y9 y8
580 * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
582 y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
586 if (packet_type == PACKET_V3_HEAD) {
588 * byte 1: . . . . ax11 ax10 ax9 ax8
589 * byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
591 etd->mt[0].x = ((packet[1] & 0x0f) << 8) | packet[2];
593 * byte 4: . . . . ay11 ay10 ay9 ay8
594 * byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
596 etd->mt[0].y = etd->y_max -
597 (((packet[4] & 0x0f) << 8) | packet[5]);
599 * wait for next packet
604 /* packet_type == PACKET_V3_TAIL */
607 x2 = ((packet[1] & 0x0f) << 8) | packet[2];
608 y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
612 pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
613 width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
615 input_report_key(dev, BTN_TOUCH, fingers != 0);
617 input_report_abs(dev, ABS_X, x1);
618 input_report_abs(dev, ABS_Y, y1);
620 elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
621 input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
622 input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
623 input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
625 /* For clickpads map both buttons to BTN_LEFT */
626 if (elantech_is_buttonpad(&etd->info))
627 input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
629 psmouse_report_standard_buttons(dev, packet[0]);
631 input_report_abs(dev, ABS_PRESSURE, pres);
632 input_report_abs(dev, ABS_TOOL_WIDTH, width);
637 static void elantech_input_sync_v4(struct psmouse *psmouse)
639 struct input_dev *dev = psmouse->dev;
640 struct elantech_data *etd = psmouse->private;
641 unsigned char *packet = psmouse->packet;
643 /* For clickpads map both buttons to BTN_LEFT */
644 if (elantech_is_buttonpad(&etd->info))
645 input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
647 psmouse_report_standard_buttons(dev, packet[0]);
649 input_mt_report_pointer_emulation(dev, true);
653 static void process_packet_status_v4(struct psmouse *psmouse)
655 struct input_dev *dev = psmouse->dev;
656 unsigned char *packet = psmouse->packet;
660 /* notify finger state change */
661 fingers = packet[1] & 0x1f;
662 for (i = 0; i < ETP_MAX_FINGERS; i++) {
663 if ((fingers & (1 << i)) == 0) {
664 input_mt_slot(dev, i);
665 input_mt_report_slot_state(dev, MT_TOOL_FINGER, false);
669 elantech_input_sync_v4(psmouse);
672 static void process_packet_head_v4(struct psmouse *psmouse)
674 struct input_dev *dev = psmouse->dev;
675 struct elantech_data *etd = psmouse->private;
676 unsigned char *packet = psmouse->packet;
680 id = ((packet[3] & 0xe0) >> 5) - 1;
681 if (id < 0 || id >= ETP_MAX_FINGERS)
684 etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2];
685 etd->mt[id].y = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
686 pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
687 traces = (packet[0] & 0xf0) >> 4;
689 input_mt_slot(dev, id);
690 input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
692 input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
693 input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
694 input_report_abs(dev, ABS_MT_PRESSURE, pres);
695 input_report_abs(dev, ABS_MT_TOUCH_MAJOR, traces * etd->width);
696 /* report this for backwards compatibility */
697 input_report_abs(dev, ABS_TOOL_WIDTH, traces);
699 elantech_input_sync_v4(psmouse);
702 static void process_packet_motion_v4(struct psmouse *psmouse)
704 struct input_dev *dev = psmouse->dev;
705 struct elantech_data *etd = psmouse->private;
706 unsigned char *packet = psmouse->packet;
707 int weight, delta_x1 = 0, delta_y1 = 0, delta_x2 = 0, delta_y2 = 0;
710 id = ((packet[0] & 0xe0) >> 5) - 1;
711 if (id < 0 || id >= ETP_MAX_FINGERS)
714 sid = ((packet[3] & 0xe0) >> 5) - 1;
715 weight = (packet[0] & 0x10) ? ETP_WEIGHT_VALUE : 1;
717 * Motion packets give us the delta of x, y values of specific fingers,
718 * but in two's complement. Let the compiler do the conversion for us.
719 * Also _enlarge_ the numbers to int, in case of overflow.
721 delta_x1 = (signed char)packet[1];
722 delta_y1 = (signed char)packet[2];
723 delta_x2 = (signed char)packet[4];
724 delta_y2 = (signed char)packet[5];
726 etd->mt[id].x += delta_x1 * weight;
727 etd->mt[id].y -= delta_y1 * weight;
728 input_mt_slot(dev, id);
729 input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
730 input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
732 if (sid >= 0 && sid < ETP_MAX_FINGERS) {
733 etd->mt[sid].x += delta_x2 * weight;
734 etd->mt[sid].y -= delta_y2 * weight;
735 input_mt_slot(dev, sid);
736 input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[sid].x);
737 input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[sid].y);
740 elantech_input_sync_v4(psmouse);
743 static void elantech_report_absolute_v4(struct psmouse *psmouse,
746 switch (packet_type) {
747 case PACKET_V4_STATUS:
748 process_packet_status_v4(psmouse);
752 process_packet_head_v4(psmouse);
755 case PACKET_V4_MOTION:
756 process_packet_motion_v4(psmouse);
761 /* impossible to get here */
766 static int elantech_packet_check_v1(struct psmouse *psmouse)
768 struct elantech_data *etd = psmouse->private;
769 unsigned char *packet = psmouse->packet;
770 unsigned char p1, p2, p3;
772 /* Parity bits are placed differently */
773 if (etd->info.fw_version < 0x020000) {
774 /* byte 0: D U p1 p2 1 p3 R L */
775 p1 = (packet[0] & 0x20) >> 5;
776 p2 = (packet[0] & 0x10) >> 4;
778 /* byte 0: n1 n0 p2 p1 1 p3 R L */
779 p1 = (packet[0] & 0x10) >> 4;
780 p2 = (packet[0] & 0x20) >> 5;
783 p3 = (packet[0] & 0x04) >> 2;
785 return etd->parity[packet[1]] == p1 &&
786 etd->parity[packet[2]] == p2 &&
787 etd->parity[packet[3]] == p3;
790 static int elantech_debounce_check_v2(struct psmouse *psmouse)
793 * When we encounter packet that matches this exactly, it means the
794 * hardware is in debounce status. Just ignore the whole packet.
796 static const u8 debounce_packet[] = {
797 0x84, 0xff, 0xff, 0x02, 0xff, 0xff
799 unsigned char *packet = psmouse->packet;
801 return !memcmp(packet, debounce_packet, sizeof(debounce_packet));
804 static int elantech_packet_check_v2(struct psmouse *psmouse)
806 struct elantech_data *etd = psmouse->private;
807 unsigned char *packet = psmouse->packet;
810 * V2 hardware has two flavors. Older ones that do not report pressure,
811 * and newer ones that reports pressure and width. With newer ones, all
812 * packets (1, 2, 3 finger touch) have the same constant bits. With
813 * older ones, 1/3 finger touch packets and 2 finger touch packets
814 * have different constant bits.
815 * With all three cases, if the constant bits are not exactly what I
816 * expected, I consider them invalid.
818 if (etd->info.reports_pressure)
819 return (packet[0] & 0x0c) == 0x04 &&
820 (packet[3] & 0x0f) == 0x02;
822 if ((packet[0] & 0xc0) == 0x80)
823 return (packet[0] & 0x0c) == 0x0c &&
824 (packet[3] & 0x0e) == 0x08;
826 return (packet[0] & 0x3c) == 0x3c &&
827 (packet[1] & 0xf0) == 0x00 &&
828 (packet[3] & 0x3e) == 0x38 &&
829 (packet[4] & 0xf0) == 0x00;
833 * We check the constant bits to determine what packet type we get,
834 * so packet checking is mandatory for v3 and later hardware.
836 static int elantech_packet_check_v3(struct psmouse *psmouse)
838 struct elantech_data *etd = psmouse->private;
839 static const u8 debounce_packet[] = {
840 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff
842 unsigned char *packet = psmouse->packet;
845 * check debounce first, it has the same signature in byte 0
846 * and byte 3 as PACKET_V3_HEAD.
848 if (!memcmp(packet, debounce_packet, sizeof(debounce_packet)))
849 return PACKET_DEBOUNCE;
852 * If the hardware flag 'crc_enabled' is set the packets have
853 * different signatures.
855 if (etd->info.crc_enabled) {
856 if ((packet[3] & 0x09) == 0x08)
857 return PACKET_V3_HEAD;
859 if ((packet[3] & 0x09) == 0x09)
860 return PACKET_V3_TAIL;
862 if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02)
863 return PACKET_V3_HEAD;
865 if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c)
866 return PACKET_V3_TAIL;
867 if ((packet[3] & 0x0f) == 0x06)
868 return PACKET_TRACKPOINT;
871 return PACKET_UNKNOWN;
874 static int elantech_packet_check_v4(struct psmouse *psmouse)
876 struct elantech_data *etd = psmouse->private;
877 unsigned char *packet = psmouse->packet;
878 unsigned char packet_type = packet[3] & 0x03;
879 unsigned int ic_version;
882 if (etd->tp_dev && (packet[3] & 0x0f) == 0x06)
883 return PACKET_TRACKPOINT;
885 /* This represents the version of IC body. */
886 ic_version = (etd->info.fw_version & 0x0f0000) >> 16;
889 * Sanity check based on the constant bits of a packet.
890 * The constant bits change depending on the value of
891 * the hardware flag 'crc_enabled' and the version of
892 * the IC body, but are the same for every packet,
893 * regardless of the type.
895 if (etd->info.crc_enabled)
896 sanity_check = ((packet[3] & 0x08) == 0x00);
897 else if (ic_version == 7 && etd->info.samples[1] == 0x2A)
898 sanity_check = ((packet[3] & 0x1c) == 0x10);
900 sanity_check = ((packet[0] & 0x08) == 0x00 &&
901 (packet[3] & 0x1c) == 0x10);
904 return PACKET_UNKNOWN;
906 switch (packet_type) {
908 return PACKET_V4_STATUS;
911 return PACKET_V4_HEAD;
914 return PACKET_V4_MOTION;
917 return PACKET_UNKNOWN;
921 * Process byte stream from mouse and handle complete packets
923 static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
925 struct elantech_data *etd = psmouse->private;
928 if (psmouse->pktcnt < psmouse->pktsize)
929 return PSMOUSE_GOOD_DATA;
931 if (etd->info.debug > 1)
932 elantech_packet_dump(psmouse);
934 switch (etd->info.hw_version) {
936 if (etd->info.paritycheck && !elantech_packet_check_v1(psmouse))
937 return PSMOUSE_BAD_DATA;
939 elantech_report_absolute_v1(psmouse);
943 /* ignore debounce */
944 if (elantech_debounce_check_v2(psmouse))
945 return PSMOUSE_FULL_PACKET;
947 if (etd->info.paritycheck && !elantech_packet_check_v2(psmouse))
948 return PSMOUSE_BAD_DATA;
950 elantech_report_absolute_v2(psmouse);
954 packet_type = elantech_packet_check_v3(psmouse);
955 switch (packet_type) {
957 return PSMOUSE_BAD_DATA;
959 case PACKET_DEBOUNCE:
960 /* ignore debounce */
963 case PACKET_TRACKPOINT:
964 elantech_report_trackpoint(psmouse, packet_type);
968 elantech_report_absolute_v3(psmouse, packet_type);
975 packet_type = elantech_packet_check_v4(psmouse);
976 switch (packet_type) {
978 return PSMOUSE_BAD_DATA;
980 case PACKET_TRACKPOINT:
981 elantech_report_trackpoint(psmouse, packet_type);
985 elantech_report_absolute_v4(psmouse, packet_type);
992 return PSMOUSE_FULL_PACKET;
996 * This writes the reg_07 value again to the hardware at the end of every
997 * set_rate call because the register loses its value. reg_07 allows setting
998 * absolute mode on v4 hardware
1000 static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
1003 struct elantech_data *etd = psmouse->private;
1005 etd->original_set_rate(psmouse, rate);
1006 if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
1007 psmouse_err(psmouse, "restoring reg_07 failed\n");
1011 * Put the touchpad into absolute mode
1013 static int elantech_set_absolute_mode(struct psmouse *psmouse)
1015 struct elantech_data *etd = psmouse->private;
1017 int tries = ETP_READ_BACK_TRIES;
1020 switch (etd->info.hw_version) {
1024 if (elantech_write_reg(psmouse, 0x10, etd->reg_10) ||
1025 elantech_write_reg(psmouse, 0x11, etd->reg_11)) {
1031 /* Windows driver values */
1033 etd->reg_11 = 0x88; /* 0x8a */
1034 etd->reg_21 = 0x60; /* 0x00 */
1035 if (elantech_write_reg(psmouse, 0x10, etd->reg_10) ||
1036 elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
1037 elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
1043 if (etd->info.set_hw_resolution)
1048 if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
1055 if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
1058 goto skip_readback_reg_10; /* v4 has no reg 0x10 to read */
1063 * Read back reg 0x10. For hardware version 1 we must make
1064 * sure the absolute mode bit is set. For hardware version 2
1065 * the touchpad is probably initializing and not ready until
1066 * we read back the value we just wrote.
1069 rc = elantech_read_reg(psmouse, 0x10, &val);
1073 elantech_debug("retrying read (%d).\n", tries);
1074 msleep(ETP_READ_BACK_DELAY);
1075 } while (tries > 0);
1078 psmouse_err(psmouse,
1079 "failed to read back register 0x10.\n");
1080 } else if (etd->info.hw_version == 1 &&
1081 !(val & ETP_R10_ABSOLUTE_MODE)) {
1082 psmouse_err(psmouse,
1083 "touchpad refuses to switch to absolute mode.\n");
1088 skip_readback_reg_10:
1090 psmouse_err(psmouse, "failed to initialise registers.\n");
1096 * (value from firmware) * 10 + 790 = dpi
1097 * we also have to convert dpi to dots/mm (*10/254 to avoid floating point)
1099 static unsigned int elantech_convert_res(unsigned int val)
1101 return (val * 10 + 790) * 10 / 254;
1104 static int elantech_get_resolution_v4(struct psmouse *psmouse,
1105 unsigned int *x_res,
1106 unsigned int *y_res,
1109 unsigned char param[3];
1111 if (elantech_send_cmd(psmouse, ETP_RESOLUTION_QUERY, param))
1114 *x_res = elantech_convert_res(param[1] & 0x0f);
1115 *y_res = elantech_convert_res((param[1] & 0xf0) >> 4);
1121 static void elantech_set_buttonpad_prop(struct psmouse *psmouse)
1123 struct input_dev *dev = psmouse->dev;
1124 struct elantech_data *etd = psmouse->private;
1126 if (elantech_is_buttonpad(&etd->info)) {
1127 __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
1128 __clear_bit(BTN_RIGHT, dev->keybit);
1133 * Some hw_version 4 models do have a middle button
1135 static const struct dmi_system_id elantech_dmi_has_middle_button[] = {
1136 #if defined(CONFIG_DMI) && defined(CONFIG_X86)
1138 /* Fujitsu H730 has a middle button */
1140 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1141 DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
1145 /* Fujitsu H760 also has a middle button */
1147 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1148 DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"),
1152 /* Fujitsu H780 also has a middle button */
1154 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1155 DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H780"),
1163 * Set the appropriate event bits for the input subsystem
1165 static int elantech_set_input_params(struct psmouse *psmouse)
1167 struct input_dev *dev = psmouse->dev;
1168 struct elantech_data *etd = psmouse->private;
1169 struct elantech_device_info *info = &etd->info;
1170 unsigned int x_min = info->x_min, y_min = info->y_min,
1171 x_max = info->x_max, y_max = info->y_max,
1172 width = info->width;
1174 __set_bit(INPUT_PROP_POINTER, dev->propbit);
1175 __set_bit(EV_KEY, dev->evbit);
1176 __set_bit(EV_ABS, dev->evbit);
1177 __clear_bit(EV_REL, dev->evbit);
1179 __set_bit(BTN_LEFT, dev->keybit);
1180 if (info->has_middle_button)
1181 __set_bit(BTN_MIDDLE, dev->keybit);
1182 __set_bit(BTN_RIGHT, dev->keybit);
1184 __set_bit(BTN_TOUCH, dev->keybit);
1185 __set_bit(BTN_TOOL_FINGER, dev->keybit);
1186 __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
1187 __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
1189 switch (info->hw_version) {
1192 if (info->fw_version < 0x020000 &&
1193 (info->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
1194 __set_bit(BTN_FORWARD, dev->keybit);
1195 __set_bit(BTN_BACK, dev->keybit);
1197 input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
1198 input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
1202 __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
1203 __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
1206 if (info->hw_version == 3)
1207 elantech_set_buttonpad_prop(psmouse);
1208 input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
1209 input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
1210 if (info->reports_pressure) {
1211 input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
1213 input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
1216 input_mt_init_slots(dev, 2, INPUT_MT_SEMI_MT);
1217 input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
1218 input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
1222 elantech_set_buttonpad_prop(psmouse);
1223 __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
1224 /* For X to recognize me as touchpad. */
1225 input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
1226 input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
1228 * range of pressure and width is the same as v2,
1229 * report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility.
1231 input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
1233 input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
1235 /* Multitouch capable pad, up to 5 fingers. */
1236 input_mt_init_slots(dev, ETP_MAX_FINGERS, 0);
1237 input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
1238 input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
1239 input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2,
1242 * The firmware reports how many trace lines the finger spans,
1243 * convert to surface unit as Protocol-B requires.
1245 input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0,
1246 ETP_WMAX_V2 * width, 0, 0);
1250 input_abs_set_res(dev, ABS_X, info->x_res);
1251 input_abs_set_res(dev, ABS_Y, info->y_res);
1252 if (info->hw_version > 1) {
1253 input_abs_set_res(dev, ABS_MT_POSITION_X, info->x_res);
1254 input_abs_set_res(dev, ABS_MT_POSITION_Y, info->y_res);
1263 struct elantech_attr_data {
1264 size_t field_offset;
1269 * Display a register value by reading a sysfs entry
1271 static ssize_t elantech_show_int_attr(struct psmouse *psmouse, void *data,
1274 struct elantech_data *etd = psmouse->private;
1275 struct elantech_attr_data *attr = data;
1276 unsigned char *reg = (unsigned char *) etd + attr->field_offset;
1280 rc = elantech_read_reg(psmouse, attr->reg, reg);
1282 return sprintf(buf, "0x%02x\n", (attr->reg && rc) ? -1 : *reg);
1286 * Write a register value by writing a sysfs entry
1288 static ssize_t elantech_set_int_attr(struct psmouse *psmouse,
1289 void *data, const char *buf, size_t count)
1291 struct elantech_data *etd = psmouse->private;
1292 struct elantech_attr_data *attr = data;
1293 unsigned char *reg = (unsigned char *) etd + attr->field_offset;
1294 unsigned char value;
1297 err = kstrtou8(buf, 16, &value);
1301 /* Do we need to preserve some bits for version 2 hardware too? */
1302 if (etd->info.hw_version == 1) {
1303 if (attr->reg == 0x10)
1304 /* Force absolute mode always on */
1305 value |= ETP_R10_ABSOLUTE_MODE;
1306 else if (attr->reg == 0x11)
1307 /* Force 4 byte mode always on */
1308 value |= ETP_R11_4_BYTE_MODE;
1311 if (!attr->reg || elantech_write_reg(psmouse, attr->reg, value) == 0)
1317 #define ELANTECH_INT_ATTR(_name, _register) \
1318 static struct elantech_attr_data elantech_attr_##_name = { \
1319 .field_offset = offsetof(struct elantech_data, _name), \
1322 PSMOUSE_DEFINE_ATTR(_name, 0644, \
1323 &elantech_attr_##_name, \
1324 elantech_show_int_attr, \
1325 elantech_set_int_attr)
1327 #define ELANTECH_INFO_ATTR(_name) \
1328 static struct elantech_attr_data elantech_attr_##_name = { \
1329 .field_offset = offsetof(struct elantech_data, info) + \
1330 offsetof(struct elantech_device_info, _name), \
1333 PSMOUSE_DEFINE_ATTR(_name, 0644, \
1334 &elantech_attr_##_name, \
1335 elantech_show_int_attr, \
1336 elantech_set_int_attr)
1338 ELANTECH_INT_ATTR(reg_07, 0x07);
1339 ELANTECH_INT_ATTR(reg_10, 0x10);
1340 ELANTECH_INT_ATTR(reg_11, 0x11);
1341 ELANTECH_INT_ATTR(reg_20, 0x20);
1342 ELANTECH_INT_ATTR(reg_21, 0x21);
1343 ELANTECH_INT_ATTR(reg_22, 0x22);
1344 ELANTECH_INT_ATTR(reg_23, 0x23);
1345 ELANTECH_INT_ATTR(reg_24, 0x24);
1346 ELANTECH_INT_ATTR(reg_25, 0x25);
1347 ELANTECH_INT_ATTR(reg_26, 0x26);
1348 ELANTECH_INFO_ATTR(debug);
1349 ELANTECH_INFO_ATTR(paritycheck);
1350 ELANTECH_INFO_ATTR(crc_enabled);
1352 static struct attribute *elantech_attrs[] = {
1353 &psmouse_attr_reg_07.dattr.attr,
1354 &psmouse_attr_reg_10.dattr.attr,
1355 &psmouse_attr_reg_11.dattr.attr,
1356 &psmouse_attr_reg_20.dattr.attr,
1357 &psmouse_attr_reg_21.dattr.attr,
1358 &psmouse_attr_reg_22.dattr.attr,
1359 &psmouse_attr_reg_23.dattr.attr,
1360 &psmouse_attr_reg_24.dattr.attr,
1361 &psmouse_attr_reg_25.dattr.attr,
1362 &psmouse_attr_reg_26.dattr.attr,
1363 &psmouse_attr_debug.dattr.attr,
1364 &psmouse_attr_paritycheck.dattr.attr,
1365 &psmouse_attr_crc_enabled.dattr.attr,
1369 static const struct attribute_group elantech_attr_group = {
1370 .attrs = elantech_attrs,
1373 static bool elantech_is_signature_valid(const unsigned char *param)
1375 static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10 };
1385 * Some hw_version >= 4 models have a revision higher then 20. Meaning
1386 * that param[2] may be 10 or 20, skip the rates check for these.
1388 if ((param[0] & 0x0f) >= 0x06 && (param[1] & 0xaf) == 0x0f &&
1392 for (i = 0; i < ARRAY_SIZE(rates); i++)
1393 if (param[2] == rates[i])
1400 * Use magic knock to detect Elantech touchpad
1402 int elantech_detect(struct psmouse *psmouse, bool set_properties)
1404 struct ps2dev *ps2dev = &psmouse->ps2dev;
1405 unsigned char param[3];
1407 ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
1409 if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
1410 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1411 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1412 ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
1413 ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
1414 psmouse_dbg(psmouse, "sending Elantech magic knock failed.\n");
1419 * Report this in case there are Elantech models that use a different
1420 * set of magic numbers
1422 if (param[0] != 0x3c || param[1] != 0x03 ||
1423 (param[2] != 0xc8 && param[2] != 0x00)) {
1424 psmouse_dbg(psmouse,
1425 "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
1426 param[0], param[1], param[2]);
1431 * Query touchpad's firmware version and see if it reports known
1432 * value to avoid mis-detection. Logitech mice are known to respond
1433 * to Elantech magic knock and there might be more.
1435 if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
1436 psmouse_dbg(psmouse, "failed to query firmware version.\n");
1440 psmouse_dbg(psmouse,
1441 "Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
1442 param[0], param[1], param[2]);
1444 if (!elantech_is_signature_valid(param)) {
1445 psmouse_dbg(psmouse,
1446 "Probably not a real Elantech touchpad. Aborting.\n");
1450 if (set_properties) {
1451 psmouse->vendor = "Elantech";
1452 psmouse->name = "Touchpad";
1459 * Clean up sysfs entries when disconnecting
1461 static void elantech_disconnect(struct psmouse *psmouse)
1463 struct elantech_data *etd = psmouse->private;
1466 * We might have left a breadcrumb when trying to
1467 * set up SMbus companion.
1469 psmouse_smbus_cleanup(psmouse);
1472 input_unregister_device(etd->tp_dev);
1473 sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
1474 &elantech_attr_group);
1475 kfree(psmouse->private);
1476 psmouse->private = NULL;
1480 * Put the touchpad back into absolute mode when reconnecting
1482 static int elantech_reconnect(struct psmouse *psmouse)
1484 psmouse_reset(psmouse);
1486 if (elantech_detect(psmouse, 0))
1489 if (elantech_set_absolute_mode(psmouse)) {
1490 psmouse_err(psmouse,
1491 "failed to put touchpad back into absolute mode.\n");
1499 * Some hw_version 4 models do not work with crc_disabled
1501 static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
1502 #if defined(CONFIG_DMI) && defined(CONFIG_X86)
1504 /* Fujitsu H730 does not work with crc_enabled == 0 */
1506 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1507 DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
1511 /* Fujitsu H760 does not work with crc_enabled == 0 */
1513 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1514 DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"),
1518 /* Fujitsu LIFEBOOK E544 does not work with crc_enabled == 0 */
1520 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1521 DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E544"),
1525 /* Fujitsu LIFEBOOK E546 does not work with crc_enabled == 0 */
1527 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1528 DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E546"),
1532 /* Fujitsu LIFEBOOK E547 does not work with crc_enabled == 0 */
1534 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1535 DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E547"),
1539 /* Fujitsu LIFEBOOK E554 does not work with crc_enabled == 0 */
1541 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1542 DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"),
1546 /* Fujitsu LIFEBOOK E556 does not work with crc_enabled == 0 */
1548 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1549 DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E556"),
1553 /* Fujitsu LIFEBOOK E557 does not work with crc_enabled == 0 */
1555 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1556 DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E557"),
1560 /* Fujitsu LIFEBOOK U745 does not work with crc_enabled == 0 */
1562 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1563 DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U745"),
1571 * Some hw_version 3 models go into error state when we try to set
1572 * bit 3 and/or bit 1 of r10.
1574 static const struct dmi_system_id no_hw_res_dmi_table[] = {
1575 #if defined(CONFIG_DMI) && defined(CONFIG_X86)
1577 /* Gigabyte U2442 */
1579 DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
1580 DMI_MATCH(DMI_PRODUCT_NAME, "U2442"),
1588 * Change Report id 0x5E to 0x5F.
1590 static int elantech_change_report_id(struct psmouse *psmouse)
1593 * NOTE: the code is expecting to receive param[] as an array of 3
1594 * items (see __ps2_command()), even if in this case only 2 are
1595 * actually needed. Make sure the array size is 3 to avoid potential
1596 * stack out-of-bound accesses.
1598 unsigned char param[3] = { 0x10, 0x03 };
1600 if (elantech_write_reg_params(psmouse, 0x7, param) ||
1601 elantech_read_reg_params(psmouse, 0x7, param) ||
1602 param[0] != 0x10 || param[1] != 0x03) {
1603 psmouse_err(psmouse, "Unable to change report ID to 0x5f.\n");
1610 * determine hardware version and set some properties according to it.
1612 static int elantech_set_properties(struct elantech_device_info *info)
1614 /* This represents the version of IC body. */
1615 info->ic_version = (info->fw_version & 0x0f0000) >> 16;
1617 /* Early version of Elan touchpads doesn't obey the rule. */
1618 if (info->fw_version < 0x020030 || info->fw_version == 0x020600)
1619 info->hw_version = 1;
1621 switch (info->ic_version) {
1624 info->hw_version = 2;
1627 info->hw_version = 3;
1630 info->hw_version = 4;
1637 /* Get information pattern for hw_version 4 */
1638 info->pattern = 0x00;
1639 if (info->ic_version == 0x0f && (info->fw_version & 0xff) <= 0x02)
1640 info->pattern = info->fw_version & 0xff;
1642 /* decide which send_cmd we're gonna use early */
1643 info->send_cmd = info->hw_version >= 3 ? elantech_send_cmd :
1646 /* Turn on packet checking by default */
1647 info->paritycheck = 1;
1650 * This firmware suffers from misreporting coordinates when
1651 * a touch action starts causing the mouse cursor or scrolled page
1652 * to jump. Enable a workaround.
1654 info->jumpy_cursor =
1655 (info->fw_version == 0x020022 || info->fw_version == 0x020600);
1657 if (info->hw_version > 1) {
1658 /* For now show extra debug information */
1661 if (info->fw_version >= 0x020800)
1662 info->reports_pressure = true;
1666 * The signatures of v3 and v4 packets change depending on the
1667 * value of this hardware flag.
1669 info->crc_enabled = (info->fw_version & 0x4000) == 0x4000 ||
1670 dmi_check_system(elantech_dmi_force_crc_enabled);
1672 /* Enable real hardware resolution on hw_version 3 ? */
1673 info->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);
1678 static int elantech_query_info(struct psmouse *psmouse,
1679 struct elantech_device_info *info)
1681 unsigned char param[3];
1682 unsigned char traces;
1683 unsigned char ic_body[3];
1685 memset(info, 0, sizeof(*info));
1688 * Do the version query again so we can store the result
1690 if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
1691 psmouse_err(psmouse, "failed to query firmware version.\n");
1694 info->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
1696 if (elantech_set_properties(info)) {
1697 psmouse_err(psmouse, "unknown hardware version, aborting...\n");
1700 psmouse_info(psmouse,
1701 "assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n",
1702 info->hw_version, param[0], param[1], param[2]);
1704 if (info->send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
1705 info->capabilities)) {
1706 psmouse_err(psmouse, "failed to query capabilities.\n");
1709 psmouse_info(psmouse,
1710 "Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
1711 info->capabilities[0], info->capabilities[1],
1712 info->capabilities[2]);
1714 if (info->hw_version != 1) {
1715 if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, info->samples)) {
1716 psmouse_err(psmouse, "failed to query sample data\n");
1719 psmouse_info(psmouse,
1720 "Elan sample query result %02x, %02x, %02x\n",
1726 if (info->pattern > 0x00 && info->ic_version == 0xf) {
1727 if (info->send_cmd(psmouse, ETP_ICBODY_QUERY, ic_body)) {
1728 psmouse_err(psmouse, "failed to query ic body\n");
1731 info->ic_version = be16_to_cpup((__be16 *)ic_body);
1732 psmouse_info(psmouse,
1733 "Elan ic body: %#04x, current fw version: %#02x\n",
1734 info->ic_version, ic_body[2]);
1737 info->product_id = be16_to_cpup((__be16 *)info->samples);
1738 if (info->pattern == 0x00)
1739 info->product_id &= 0xff;
1741 if (info->samples[1] == 0x74 && info->hw_version == 0x03) {
1743 * This module has a bug which makes absolute mode
1744 * unusable, so let's abort so we'll be using standard
1747 psmouse_info(psmouse,
1748 "absolute mode broken, forcing standard PS/2 protocol\n");
1752 /* The MSB indicates the presence of the trackpoint */
1753 info->has_trackpoint = (info->capabilities[0] & 0x80) == 0x80;
1755 if (info->has_trackpoint && info->ic_version == 0x0011 &&
1756 (info->product_id == 0x08 || info->product_id == 0x09 ||
1757 info->product_id == 0x0d || info->product_id == 0x0e)) {
1759 * This module has a bug which makes trackpoint in SMBus
1760 * mode return invalid data unless trackpoint is switched
1761 * from using 0x5e reports to 0x5f. If we are not able to
1762 * make the switch, let's abort initialization so we'll be
1763 * using standard PS/2 protocol.
1765 if (elantech_change_report_id(psmouse)) {
1766 psmouse_info(psmouse,
1767 "Trackpoint report is broken, forcing standard PS/2 protocol\n");
1774 if (info->hw_version == 4) {
1775 if (elantech_get_resolution_v4(psmouse,
1779 psmouse_warn(psmouse,
1780 "failed to query resolution data.\n");
1784 /* query range information */
1785 switch (info->hw_version) {
1787 info->x_min = ETP_XMIN_V1;
1788 info->y_min = ETP_YMIN_V1;
1789 info->x_max = ETP_XMAX_V1;
1790 info->y_max = ETP_YMAX_V1;
1794 if (info->fw_version == 0x020800 ||
1795 info->fw_version == 0x020b00 ||
1796 info->fw_version == 0x020030) {
1797 info->x_min = ETP_XMIN_V2;
1798 info->y_min = ETP_YMIN_V2;
1799 info->x_max = ETP_XMAX_V2;
1800 info->y_max = ETP_YMAX_V2;
1805 i = (info->fw_version > 0x020800 &&
1806 info->fw_version < 0x020900) ? 1 : 2;
1808 if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
1811 fixed_dpi = param[1] & 0x10;
1813 if (((info->fw_version >> 16) == 0x14) && fixed_dpi) {
1814 if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
1817 info->x_max = (info->capabilities[1] - i) * param[1] / 2;
1818 info->y_max = (info->capabilities[2] - i) * param[2] / 2;
1819 } else if (info->fw_version == 0x040216) {
1822 } else if (info->fw_version == 0x040219 || info->fw_version == 0x040215) {
1826 info->x_max = (info->capabilities[1] - i) * 64;
1827 info->y_max = (info->capabilities[2] - i) * 64;
1833 if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
1836 info->x_max = (0x0f & param[0]) << 8 | param[1];
1837 info->y_max = (0xf0 & param[0]) << 4 | param[2];
1841 if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
1844 info->x_max = (0x0f & param[0]) << 8 | param[1];
1845 info->y_max = (0xf0 & param[0]) << 4 | param[2];
1846 traces = info->capabilities[1];
1847 if ((traces < 2) || (traces > info->x_max))
1850 info->width = info->x_max / (traces - 1);
1852 /* column number of traces */
1853 info->x_traces = traces;
1855 /* row number of traces */
1856 traces = info->capabilities[2];
1857 if ((traces >= 2) && (traces <= info->y_max))
1858 info->y_traces = traces;
1863 /* check for the middle button: DMI matching or new v4 firmwares */
1864 info->has_middle_button = dmi_check_system(elantech_dmi_has_middle_button) ||
1865 (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) &&
1866 !elantech_is_buttonpad(info));
1871 #if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
1874 * The newest Elantech device can use a secondary bus (over SMBus) which
1875 * provides a better bandwidth and allow a better control of the touchpads.
1876 * This is used to decide if we need to use this bus or not.
1879 ELANTECH_SMBUS_NOT_SET = -1,
1884 static int elantech_smbus = IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) ?
1885 ELANTECH_SMBUS_NOT_SET : ELANTECH_SMBUS_OFF;
1886 module_param_named(elantech_smbus, elantech_smbus, int, 0644);
1887 MODULE_PARM_DESC(elantech_smbus, "Use a secondary bus for the Elantech device.");
1889 static const char * const i2c_blacklist_pnp_ids[] = {
1891 * These are known to not be working properly as bits are missing
1897 static int elantech_create_smbus(struct psmouse *psmouse,
1898 struct elantech_device_info *info,
1899 bool leave_breadcrumbs)
1901 struct property_entry i2c_props[11] = {};
1902 struct i2c_board_info smbus_board = {
1903 I2C_BOARD_INFO("elan_i2c", 0x15),
1904 .flags = I2C_CLIENT_HOST_NOTIFY,
1906 unsigned int idx = 0;
1908 i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-x",
1910 i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-y",
1912 i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-min-x",
1914 i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-min-y",
1917 i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-x-mm",
1918 (info->x_max + 1) / info->x_res);
1920 i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-y-mm",
1921 (info->y_max + 1) / info->y_res);
1923 if (info->has_trackpoint)
1924 i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,trackpoint");
1926 if (info->has_middle_button)
1927 i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,middle-button");
1930 i2c_props[idx++] = PROPERTY_ENTRY_U32("elan,x_traces",
1933 i2c_props[idx++] = PROPERTY_ENTRY_U32("elan,y_traces",
1936 if (elantech_is_buttonpad(info))
1937 i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,clickpad");
1939 smbus_board.fwnode = fwnode_create_software_node(i2c_props, NULL);
1940 if (IS_ERR(smbus_board.fwnode))
1941 return PTR_ERR(smbus_board.fwnode);
1943 return psmouse_smbus_init(psmouse, &smbus_board, NULL, 0, false,
1948 * elantech_setup_smbus - called once the PS/2 devices are enumerated
1949 * and decides to instantiate a SMBus InterTouch device.
1951 static int elantech_setup_smbus(struct psmouse *psmouse,
1952 struct elantech_device_info *info,
1953 bool leave_breadcrumbs)
1957 if (elantech_smbus == ELANTECH_SMBUS_OFF)
1960 if (elantech_smbus == ELANTECH_SMBUS_NOT_SET) {
1962 * New ICs are enabled by default, unless mentioned in
1963 * i2c_blacklist_pnp_ids.
1964 * Old ICs are up to the user to decide.
1966 if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) ||
1967 psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids))
1971 psmouse_info(psmouse, "Trying to set up SMBus access\n");
1973 error = elantech_create_smbus(psmouse, info, leave_breadcrumbs);
1975 if (error == -EAGAIN)
1976 psmouse_info(psmouse, "SMbus companion is not ready yet\n");
1978 psmouse_err(psmouse, "unable to create intertouch device\n");
1986 static bool elantech_use_host_notify(struct psmouse *psmouse,
1987 struct elantech_device_info *info)
1989 if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
1992 switch (info->bus) {
1993 case ETP_BUS_PS2_ONLY:
1996 case ETP_BUS_SMB_ALERT_ONLY:
1997 case ETP_BUS_PS2_SMB_ALERT:
1998 psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n");
2000 case ETP_BUS_SMB_HST_NTFY_ONLY:
2001 case ETP_BUS_PS2_SMB_HST_NTFY:
2004 psmouse_dbg(psmouse,
2005 "Ignoring SMBus bus provider %d.\n",
2012 int elantech_init_smbus(struct psmouse *psmouse)
2014 struct elantech_device_info info;
2017 psmouse_reset(psmouse);
2019 error = elantech_query_info(psmouse, &info);
2023 if (info.hw_version < 4) {
2028 return elantech_create_smbus(psmouse, &info, false);
2030 psmouse_reset(psmouse);
2033 #endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
2036 * Initialize the touchpad and create sysfs entries
2038 static int elantech_setup_ps2(struct psmouse *psmouse,
2039 struct elantech_device_info *info)
2041 struct elantech_data *etd;
2043 int error = -EINVAL;
2044 struct input_dev *tp_dev;
2046 psmouse->private = etd = kzalloc(sizeof(*etd), GFP_KERNEL);
2053 for (i = 1; i < 256; i++)
2054 etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
2056 if (elantech_set_absolute_mode(psmouse)) {
2057 psmouse_err(psmouse,
2058 "failed to put touchpad into absolute mode.\n");
2062 if (info->fw_version == 0x381f17) {
2063 etd->original_set_rate = psmouse->set_rate;
2064 psmouse->set_rate = elantech_set_rate_restore_reg_07;
2067 if (elantech_set_input_params(psmouse)) {
2068 psmouse_err(psmouse, "failed to query touchpad range.\n");
2072 error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
2073 &elantech_attr_group);
2075 psmouse_err(psmouse,
2076 "failed to create sysfs attributes, error: %d.\n",
2081 if (info->has_trackpoint) {
2082 tp_dev = input_allocate_device();
2086 goto init_fail_tp_alloc;
2089 etd->tp_dev = tp_dev;
2090 snprintf(etd->tp_phys, sizeof(etd->tp_phys), "%s/input1",
2091 psmouse->ps2dev.serio->phys);
2092 tp_dev->phys = etd->tp_phys;
2093 tp_dev->name = "ETPS/2 Elantech TrackPoint";
2094 tp_dev->id.bustype = BUS_I8042;
2095 tp_dev->id.vendor = 0x0002;
2096 tp_dev->id.product = PSMOUSE_ELANTECH;
2097 tp_dev->id.version = 0x0000;
2098 tp_dev->dev.parent = &psmouse->ps2dev.serio->dev;
2099 tp_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
2100 tp_dev->relbit[BIT_WORD(REL_X)] =
2101 BIT_MASK(REL_X) | BIT_MASK(REL_Y);
2102 tp_dev->keybit[BIT_WORD(BTN_LEFT)] =
2103 BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) |
2104 BIT_MASK(BTN_RIGHT);
2106 __set_bit(INPUT_PROP_POINTER, tp_dev->propbit);
2107 __set_bit(INPUT_PROP_POINTING_STICK, tp_dev->propbit);
2109 error = input_register_device(etd->tp_dev);
2111 goto init_fail_tp_reg;
2114 psmouse->protocol_handler = elantech_process_byte;
2115 psmouse->disconnect = elantech_disconnect;
2116 psmouse->reconnect = elantech_reconnect;
2117 psmouse->fast_reconnect = NULL;
2118 psmouse->pktsize = info->hw_version > 1 ? 6 : 4;
2122 input_free_device(tp_dev);
2124 sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
2125 &elantech_attr_group);
2131 int elantech_init_ps2(struct psmouse *psmouse)
2133 struct elantech_device_info info;
2136 psmouse_reset(psmouse);
2138 error = elantech_query_info(psmouse, &info);
2142 error = elantech_setup_ps2(psmouse, &info);
2148 psmouse_reset(psmouse);
2152 int elantech_init(struct psmouse *psmouse)
2154 struct elantech_device_info info;
2157 psmouse_reset(psmouse);
2159 error = elantech_query_info(psmouse, &info);
2163 #if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
2165 if (elantech_use_host_notify(psmouse, &info)) {
2166 if (!IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) ||
2167 !IS_ENABLED(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)) {
2168 psmouse_warn(psmouse,
2169 "The touchpad can support a better bus than the too old PS/2 protocol. "
2170 "Make sure MOUSE_PS2_ELANTECH_SMBUS and MOUSE_ELAN_I2C_SMBUS are enabled to get a better touchpad experience.\n");
2172 error = elantech_setup_smbus(psmouse, &info, true);
2174 return PSMOUSE_ELANTECH_SMBUS;
2177 #endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
2179 error = elantech_setup_ps2(psmouse, &info);
2182 * Not using any flavor of Elantech support, so clean up
2183 * SMbus breadcrumbs, if any.
2185 psmouse_smbus_cleanup(psmouse);
2189 return PSMOUSE_ELANTECH;
2191 psmouse_reset(psmouse);