drivers/video/fbdev/cyber2000fb.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *  linux/drivers/video/cyber2000fb.c
   4  *
   5  *  Copyright (C) 1998-2002 Russell King
   6  *
   7  *  MIPS and 50xx clock support
   8  *  Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com>
   9  *
  10  *  32 bit support, text color and panning fixes for modes != 8 bit
  11  *  Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org>
  12  *
  13  * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device
  14  *
  15  * Based on cyberfb.c.
  16  *
  17  * Note that we now use the new fbcon fix, var and cmap scheme.  We do
  18  * still have to check which console is the currently displayed one
  19  * however, especially for the colourmap stuff.
  20  *
  21  * We also use the new hotplug PCI subsystem.  I'm not sure if there
  22  * are any such cards, but I'm erring on the side of caution.  We don't
  23  * want to go pop just because someone does have one.
  24  *
  25  * Note that this doesn't work fully in the case of multiple CyberPro
  26  * cards with grabbers.  We currently can only attach to the first
  27  * CyberPro card found.
  28  *
  29  * When we're in truecolour mode, we power down the LUT RAM as a power
  30  * saving feature.  Also, when we enter any of the powersaving modes
  31  * (except soft blanking) we power down the RAMDACs.  This saves about
  32  * 1W, which is roughly 8% of the power consumption of a NetWinder
  33  * (which, incidentally, is about the same saving as a 2.5in hard disk
  34  * entering standby mode.)
  35  */
  36 #include <linux/aperture.h>
  37 #include <linux/module.h>
  38 #include <linux/kernel.h>
  39 #include <linux/errno.h>
  40 #include <linux/string.h>
  41 #include <linux/mm.h>
  42 #include <linux/slab.h>
  43 #include <linux/delay.h>
  44 #include <linux/fb.h>
  45 #include <linux/pci.h>
  46 #include <linux/init.h>
  47 #include <linux/io.h>
  48 #include <linux/i2c.h>
  49 #include <linux/i2c-algo-bit.h>
  50
  51
  52 #ifdef __arm__
  53 #include <asm/mach-types.h>
  54 #endif
  55
  56 #include "cyber2000fb.h"
  57
  58 struct cfb_info {
  59         struct fb_info          fb;
  60         struct display_switch   *dispsw;
  61         unsigned char           __iomem *region;
  62         unsigned char           __iomem *regs;
  63         u_int                   id;
  64         u_int                   irq;
  65         int                     func_use_count;
  66         u_long                  ref_ps;
  67
  68         /*
  69          * Clock divisors
  70          */
  71         u_int                   divisors[4];
  72
  73         struct {
  74                 u8 red, green, blue;
  75         } palette[NR_PALETTE];
  76
  77         u_char                  mem_ctl1;
  78         u_char                  mem_ctl2;
  79         u_char                  mclk_mult;
  80         u_char                  mclk_div;
  81         /*
  82          * RAMDAC control register is both of these or'ed together
  83          */
  84         u_char                  ramdac_ctrl;
  85         u_char                  ramdac_powerdown;
  86
  87         u32                     pseudo_palette[16];
  88
  89         spinlock_t              reg_b0_lock;
  90
  91 #ifdef CONFIG_FB_CYBER2000_DDC
  92         bool                    ddc_registered;
  93         struct i2c_adapter      ddc_adapter;
  94         struct i2c_algo_bit_data        ddc_algo;
  95 #endif
  96
  97 #ifdef CONFIG_FB_CYBER2000_I2C
  98         struct i2c_adapter      i2c_adapter;
  99         struct i2c_algo_bit_data i2c_algo;
 100 #endif
 101 };
 102
 103 static char *default_font = "Acorn8x8";
 104 module_param(default_font, charp, 0);
 105 MODULE_PARM_DESC(default_font, "Default font name");
 106
 107 /*
 108  * Our access methods.
 109  */
 110 #define cyber2000fb_writel(val, reg, cfb)       writel(val, (cfb)->regs + (reg))
 111 #define cyber2000fb_writew(val, reg, cfb)       writew(val, (cfb)->regs + (reg))
 112 #define cyber2000fb_writeb(val, reg, cfb)       writeb(val, (cfb)->regs + (reg))
 113
 114 #define cyber2000fb_readb(reg, cfb)             readb((cfb)->regs + (reg))
 115
 116 static inline void
 117 cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
 118 {
 119         cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb);
 120 }
 121
 122 static inline void
 123 cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
 124 {
 125         cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb);
 126 }
 127
 128 static inline unsigned int
 129 cyber2000_grphr(unsigned int reg, struct cfb_info *cfb)
 130 {
 131         cyber2000fb_writeb(reg, 0x3ce, cfb);
 132         return cyber2000fb_readb(0x3cf, cfb);
 133 }
 134
 135 static inline void
 136 cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
 137 {
 138         cyber2000fb_readb(0x3da, cfb);
 139         cyber2000fb_writeb(reg, 0x3c0, cfb);
 140         cyber2000fb_readb(0x3c1, cfb);
 141         cyber2000fb_writeb(val, 0x3c0, cfb);
 142 }
 143
 144 static inline void
 145 cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
 146 {
 147         cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb);
 148 }
 149
 150 /* -------------------- Hardware specific routines ------------------------- */
 151
 152 /*
 153  * Hardware Cyber2000 Acceleration
 154  */
 155 static void
 156 cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 157 {
 158         struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
 159         unsigned long dst, col;
 160
 161         if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
 162                 cfb_fillrect(info, rect);
 163                 return;
 164         }
 165
 166         cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
 167         cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb);
 168         cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb);
 169
 170         col = rect->color;
 171         if (cfb->fb.var.bits_per_pixel > 8)
 172                 col = ((u32 *)cfb->fb.pseudo_palette)[col];
 173         cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb);
 174
 175         dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual;
 176         if (cfb->fb.var.bits_per_pixel == 24) {
 177                 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
 178                 dst *= 3;
 179         }
 180
 181         cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
 182         cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
 183         cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb);
 184         cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb);
 185 }
 186
 187 static void
 188 cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
 189 {
 190         struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
 191         unsigned int cmd = CO_CMD_L_PATTERN_FGCOL;
 192         unsigned long src, dst;
 193
 194         if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
 195                 cfb_copyarea(info, region);
 196                 return;
 197         }
 198
 199         cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
 200         cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb);
 201         cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb);
 202
 203         src = region->sx + region->sy * cfb->fb.var.xres_virtual;
 204         dst = region->dx + region->dy * cfb->fb.var.xres_virtual;
 205
 206         if (region->sx < region->dx) {
 207                 src += region->width - 1;
 208                 dst += region->width - 1;
 209                 cmd |= CO_CMD_L_INC_LEFT;
 210         }
 211
 212         if (region->sy < region->dy) {
 213                 src += (region->height - 1) * cfb->fb.var.xres_virtual;
 214                 dst += (region->height - 1) * cfb->fb.var.xres_virtual;
 215                 cmd |= CO_CMD_L_INC_UP;
 216         }
 217
 218         if (cfb->fb.var.bits_per_pixel == 24) {
 219                 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
 220                 src *= 3;
 221                 dst *= 3;
 222         }
 223         cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb);
 224         cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
 225         cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
 226         cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb);
 227         cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER,
 228                            CO_REG_CMD_H, cfb);
 229 }
 230
 231 static void
 232 cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image)
 233 {
 234         cfb_imageblit(info, image);
 235         return;
 236 }
 237
 238 static int cyber2000fb_sync(struct fb_info *info)
 239 {
 240         struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
 241         int count = 100000;
 242
 243         if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT))
 244                 return 0;
 245
 246         while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) {
 247                 if (!count--) {
 248                         debug_printf("accel_wait timed out\n");
 249                         cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
 250                         break;
 251                 }
 252                 udelay(1);
 253         }
 254         return 0;
 255 }
 256
 257 /*
 258  * ===========================================================================
 259  */
 260
 261 static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf)
 262 {
 263         u_int mask = (1 << bf->length) - 1;
 264
 265         return (val >> (16 - bf->length) & mask) << bf->offset;
 266 }
 267
 268 /*
 269  *    Set a single color register. Return != 0 for invalid regno.
 270  */
 271 static int
 272 cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 273                       u_int transp, struct fb_info *info)
 274 {
 275         struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
 276         struct fb_var_screeninfo *var = &cfb->fb.var;
 277         u32 pseudo_val;
 278         int ret = 1;
 279
 280         switch (cfb->fb.fix.visual) {
 281         default:
 282                 return 1;
 283
 284         /*
 285          * Pseudocolour:
 286          *         8     8
 287          * pixel --/--+--/-->  red lut  --> red dac
 288          *            |  8
 289          *            +--/--> green lut --> green dac
 290          *            |  8
 291          *            +--/-->  blue lut --> blue dac
 292          */
 293         case FB_VISUAL_PSEUDOCOLOR:
 294                 if (regno >= NR_PALETTE)
 295                         return 1;
 296
 297                 red >>= 8;
 298                 green >>= 8;
 299                 blue >>= 8;
 300
 301                 cfb->palette[regno].red = red;
 302                 cfb->palette[regno].green = green;
 303                 cfb->palette[regno].blue = blue;
 304
 305                 cyber2000fb_writeb(regno, 0x3c8, cfb);
 306                 cyber2000fb_writeb(red, 0x3c9, cfb);
 307                 cyber2000fb_writeb(green, 0x3c9, cfb);
 308                 cyber2000fb_writeb(blue, 0x3c9, cfb);
 309                 return 0;
 310
 311         /*
 312          * Direct colour:
 313          *         n     rl
 314          * pixel --/--+--/-->  red lut  --> red dac
 315          *            |  gl
 316          *            +--/--> green lut --> green dac
 317          *            |  bl
 318          *            +--/-->  blue lut --> blue dac
 319          * n = bpp, rl = red length, gl = green length, bl = blue length
 320          */
 321         case FB_VISUAL_DIRECTCOLOR:
 322                 red >>= 8;
 323                 green >>= 8;
 324                 blue >>= 8;
 325
 326                 if (var->green.length == 6 && regno < 64) {
 327                         cfb->palette[regno << 2].green = green;
 328
 329                         /*
 330                          * The 6 bits of the green component are applied
 331                          * to the high 6 bits of the LUT.
 332                          */
 333                         cyber2000fb_writeb(regno << 2, 0x3c8, cfb);
 334                         cyber2000fb_writeb(cfb->palette[regno >> 1].red,
 335                                            0x3c9, cfb);
 336                         cyber2000fb_writeb(green, 0x3c9, cfb);
 337                         cyber2000fb_writeb(cfb->palette[regno >> 1].blue,
 338                                            0x3c9, cfb);
 339
 340                         green = cfb->palette[regno << 3].green;
 341
 342                         ret = 0;
 343                 }
 344
 345                 if (var->green.length >= 5 && regno < 32) {
 346                         cfb->palette[regno << 3].red = red;
 347                         cfb->palette[regno << 3].green = green;
 348                         cfb->palette[regno << 3].blue = blue;
 349
 350                         /*
 351                          * The 5 bits of each colour component are
 352                          * applied to the high 5 bits of the LUT.
 353                          */
 354                         cyber2000fb_writeb(regno << 3, 0x3c8, cfb);
 355                         cyber2000fb_writeb(red, 0x3c9, cfb);
 356                         cyber2000fb_writeb(green, 0x3c9, cfb);
 357                         cyber2000fb_writeb(blue, 0x3c9, cfb);
 358                         ret = 0;
 359                 }
 360
 361                 if (var->green.length == 4 && regno < 16) {
 362                         cfb->palette[regno << 4].red = red;
 363                         cfb->palette[regno << 4].green = green;
 364                         cfb->palette[regno << 4].blue = blue;
 365
 366                         /*
 367                          * The 5 bits of each colour component are
 368                          * applied to the high 5 bits of the LUT.
 369                          */
 370                         cyber2000fb_writeb(regno << 4, 0x3c8, cfb);
 371                         cyber2000fb_writeb(red, 0x3c9, cfb);
 372                         cyber2000fb_writeb(green, 0x3c9, cfb);
 373                         cyber2000fb_writeb(blue, 0x3c9, cfb);
 374                         ret = 0;
 375                 }
 376
 377                 /*
 378                  * Since this is only used for the first 16 colours, we
 379                  * don't have to care about overflowing for regno >= 32
 380                  */
 381                 pseudo_val = regno << var->red.offset |
 382                              regno << var->green.offset |
 383                              regno << var->blue.offset;
 384                 break;
 385
 386         /*
 387          * True colour:
 388          *         n     rl
 389          * pixel --/--+--/--> red dac
 390          *            |  gl
 391          *            +--/--> green dac
 392          *            |  bl
 393          *            +--/--> blue dac
 394          * n = bpp, rl = red length, gl = green length, bl = blue length
 395          */
 396         case FB_VISUAL_TRUECOLOR:
 397                 pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp);
 398                 pseudo_val |= convert_bitfield(red, &var->red);
 399                 pseudo_val |= convert_bitfield(green, &var->green);
 400                 pseudo_val |= convert_bitfield(blue, &var->blue);
 401                 ret = 0;
 402                 break;
 403         }
 404
 405         /*
 406          * Now set our pseudo palette for the CFB16/24/32 drivers.
 407          */
 408         if (regno < 16)
 409                 ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val;
 410
 411         return ret;
 412 }
 413
 414 struct par_info {
 415         /*
 416          * Hardware
 417          */
 418         u_char  clock_mult;
 419         u_char  clock_div;
 420         u_char  extseqmisc;
 421         u_char  co_pixfmt;
 422         u_char  crtc_ofl;
 423         u_char  crtc[19];
 424         u_int   width;
 425         u_int   pitch;
 426         u_int   fetch;
 427
 428         /*
 429          * Other
 430          */
 431         u_char  ramdac;
 432 };
 433
 434 static const u_char crtc_idx[] = {
 435         0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
 436         0x08, 0x09,
 437         0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18
 438 };
 439
 440 static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
 441 {
 442         unsigned int i;
 443         unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown;
 444
 445         cyber2000fb_writeb(0x56, 0x3ce, cfb);
 446         i = cyber2000fb_readb(0x3cf, cfb);
 447         cyber2000fb_writeb(i | 4, 0x3cf, cfb);
 448         cyber2000fb_writeb(val, 0x3c6, cfb);
 449         cyber2000fb_writeb(i, 0x3cf, cfb);
 450         /* prevent card lock-up observed on x86 with CyberPro 2000 */
 451         cyber2000fb_readb(0x3cf, cfb);
 452 }
 453
 454 static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
 455 {
 456         u_int i;
 457
 458         /*
 459          * Blank palette
 460          */
 461         for (i = 0; i < NR_PALETTE; i++) {
 462                 cyber2000fb_writeb(i, 0x3c8, cfb);
 463                 cyber2000fb_writeb(0, 0x3c9, cfb);
 464                 cyber2000fb_writeb(0, 0x3c9, cfb);
 465                 cyber2000fb_writeb(0, 0x3c9, cfb);
 466         }
 467
 468         cyber2000fb_writeb(0xef, 0x3c2, cfb);
 469         cyber2000_crtcw(0x11, 0x0b, cfb);
 470         cyber2000_attrw(0x11, 0x00, cfb);
 471
 472         cyber2000_seqw(0x00, 0x01, cfb);
 473         cyber2000_seqw(0x01, 0x01, cfb);
 474         cyber2000_seqw(0x02, 0x0f, cfb);
 475         cyber2000_seqw(0x03, 0x00, cfb);
 476         cyber2000_seqw(0x04, 0x0e, cfb);
 477         cyber2000_seqw(0x00, 0x03, cfb);
 478
 479         for (i = 0; i < sizeof(crtc_idx); i++)
 480                 cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb);
 481
 482         for (i = 0x0a; i < 0x10; i++)
 483                 cyber2000_crtcw(i, 0, cfb);
 484
 485         cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb);
 486         cyber2000_grphw(0x00, 0x00, cfb);
 487         cyber2000_grphw(0x01, 0x00, cfb);
 488         cyber2000_grphw(0x02, 0x00, cfb);
 489         cyber2000_grphw(0x03, 0x00, cfb);
 490         cyber2000_grphw(0x04, 0x00, cfb);
 491         cyber2000_grphw(0x05, 0x60, cfb);
 492         cyber2000_grphw(0x06, 0x05, cfb);
 493         cyber2000_grphw(0x07, 0x0f, cfb);
 494         cyber2000_grphw(0x08, 0xff, cfb);
 495
 496         /* Attribute controller registers */
 497         for (i = 0; i < 16; i++)
 498                 cyber2000_attrw(i, i, cfb);
 499
 500         cyber2000_attrw(0x10, 0x01, cfb);
 501         cyber2000_attrw(0x11, 0x00, cfb);
 502         cyber2000_attrw(0x12, 0x0f, cfb);
 503         cyber2000_attrw(0x13, 0x00, cfb);
 504         cyber2000_attrw(0x14, 0x00, cfb);
 505
 506         /* PLL registers */
 507         spin_lock(&cfb->reg_b0_lock);
 508         cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
 509         cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
 510         cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
 511         cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb);
 512         cyber2000_grphw(0x90, 0x01, cfb);
 513         cyber2000_grphw(0xb9, 0x80, cfb);
 514         cyber2000_grphw(0xb9, 0x00, cfb);
 515         spin_unlock(&cfb->reg_b0_lock);
 516
 517         cfb->ramdac_ctrl = hw->ramdac;
 518         cyber2000fb_write_ramdac_ctrl(cfb);
 519
 520         cyber2000fb_writeb(0x20, 0x3c0, cfb);
 521         cyber2000fb_writeb(0xff, 0x3c6, cfb);
 522
 523         cyber2000_grphw(0x14, hw->fetch, cfb);
 524         cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) |
 525                               ((hw->pitch >> 4) & 0x30), cfb);
 526         cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb);
 527
 528         /*
 529          * Set up accelerator registers
 530          */
 531         cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb);
 532         cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb);
 533         cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb);
 534 }
 535
 536 static inline int
 537 cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var)
 538 {
 539         u_int base = var->yoffset * var->xres_virtual + var->xoffset;
 540
 541         base *= var->bits_per_pixel;
 542
 543         /*
 544          * Convert to bytes and shift two extra bits because DAC
 545          * can only start on 4 byte aligned data.
 546          */
 547         base >>= 5;
 548
 549         if (base >= 1 << 20)
 550                 return -EINVAL;
 551
 552         cyber2000_grphw(0x10, base >> 16 | 0x10, cfb);
 553         cyber2000_crtcw(0x0c, base >> 8, cfb);
 554         cyber2000_crtcw(0x0d, base, cfb);
 555
 556         return 0;
 557 }
 558
 559 static int
 560 cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb,
 561                         struct fb_var_screeninfo *var)
 562 {
 563         u_int Htotal, Hblankend, Hsyncend;
 564         u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend;
 565 #define ENCODE_BIT(v, b1, m, b2) ((((v) >> (b1)) & (m)) << (b2))
 566
 567         hw->crtc[13] = hw->pitch;
 568         hw->crtc[17] = 0xe3;
 569         hw->crtc[14] = 0;
 570         hw->crtc[8]  = 0;
 571
 572         Htotal     = var->xres + var->right_margin +
 573                      var->hsync_len + var->left_margin;
 574
 575         if (Htotal > 2080)
 576                 return -EINVAL;
 577
 578         hw->crtc[0] = (Htotal >> 3) - 5;
 579         hw->crtc[1] = (var->xres >> 3) - 1;
 580         hw->crtc[2] = var->xres >> 3;
 581         hw->crtc[4] = (var->xres + var->right_margin) >> 3;
 582
 583         Hblankend   = (Htotal - 4 * 8) >> 3;
 584
 585         hw->crtc[3] = ENCODE_BIT(Hblankend,  0, 0x1f,  0) |
 586                       ENCODE_BIT(1,          0, 0x01,  7);
 587
 588         Hsyncend    = (var->xres + var->right_margin + var->hsync_len) >> 3;
 589
 590         hw->crtc[5] = ENCODE_BIT(Hsyncend,   0, 0x1f,  0) |
 591                       ENCODE_BIT(Hblankend,  5, 0x01,  7);
 592
 593         Vdispend    = var->yres - 1;
 594         Vsyncstart  = var->yres + var->lower_margin;
 595         Vsyncend    = var->yres + var->lower_margin + var->vsync_len;
 596         Vtotal      = var->yres + var->lower_margin + var->vsync_len +
 597                       var->upper_margin - 2;
 598
 599         if (Vtotal > 2047)
 600                 return -EINVAL;
 601
 602         Vblankstart = var->yres + 6;
 603         Vblankend   = Vtotal - 10;
 604
 605         hw->crtc[6]  = Vtotal;
 606         hw->crtc[7]  = ENCODE_BIT(Vtotal,     8, 0x01,  0) |
 607                         ENCODE_BIT(Vdispend,   8, 0x01,  1) |
 608                         ENCODE_BIT(Vsyncstart, 8, 0x01,  2) |
 609                         ENCODE_BIT(Vblankstart, 8, 0x01,  3) |
 610                         ENCODE_BIT(1,          0, 0x01,  4) |
 611                         ENCODE_BIT(Vtotal,     9, 0x01,  5) |
 612                         ENCODE_BIT(Vdispend,   9, 0x01,  6) |
 613                         ENCODE_BIT(Vsyncstart, 9, 0x01,  7);
 614         hw->crtc[9]  = ENCODE_BIT(0,          0, 0x1f,  0) |
 615                         ENCODE_BIT(Vblankstart, 9, 0x01,  5) |
 616                         ENCODE_BIT(1,          0, 0x01,  6);
 617         hw->crtc[10] = Vsyncstart;
 618         hw->crtc[11] = ENCODE_BIT(Vsyncend,   0, 0x0f,  0) |
 619                        ENCODE_BIT(1,          0, 0x01,  7);
 620         hw->crtc[12] = Vdispend;
 621         hw->crtc[15] = Vblankstart;
 622         hw->crtc[16] = Vblankend;
 623         hw->crtc[18] = 0xff;
 624
 625         /*
 626          * overflow - graphics reg 0x11
 627          * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10
 628          * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT
 629          */
 630         hw->crtc_ofl =
 631                 ENCODE_BIT(Vtotal, 10, 0x01, 0) |
 632                 ENCODE_BIT(Vdispend, 10, 0x01, 1) |
 633                 ENCODE_BIT(Vsyncstart, 10, 0x01, 2) |
 634                 ENCODE_BIT(Vblankstart, 10, 0x01, 3) |
 635                 EXT_CRT_VRTOFL_LINECOMP10;
 636
 637         /* woody: set the interlaced bit... */
 638         /* FIXME: what about doublescan? */
 639         if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
 640                 hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE;
 641
 642         return 0;
 643 }
 644
 645 /*
 646  * The following was discovered by a good monitor, bit twiddling, theorising
 647  * and but mostly luck.  Strangely, it looks like everyone elses' PLL!
 648  *
 649  * Clock registers:
 650  *   fclock = fpll / div2
 651  *   fpll   = fref * mult / div1
 652  * where:
 653  *   fref = 14.318MHz (69842ps)
 654  *   mult = reg0xb0.7:0
 655  *   div1 = (reg0xb1.5:0 + 1)
 656  *   div2 =  2^(reg0xb1.7:6)
 657  *   fpll should be between 115 and 260 MHz
 658  *  (8696ps and 3846ps)
 659  */
 660 static int
 661 cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb,
 662                          struct fb_var_screeninfo *var)
 663 {
 664         u_long pll_ps = var->pixclock;
 665         const u_long ref_ps = cfb->ref_ps;
 666         u_int div2, t_div1, best_div1, best_mult;
 667         int best_diff;
 668         int vco;
 669
 670         /*
 671          * Step 1:
 672          *   find div2 such that 115MHz < fpll < 260MHz
 673          *   and 0 <= div2 < 4
 674          */
 675         for (div2 = 0; div2 < 4; div2++) {
 676                 u_long new_pll;
 677
 678                 new_pll = pll_ps / cfb->divisors[div2];
 679                 if (8696 > new_pll && new_pll > 3846) {
 680                         pll_ps = new_pll;
 681                         break;
 682                 }
 683         }
 684
 685         if (div2 == 4)
 686                 return -EINVAL;
 687
 688         /*
 689          * Step 2:
 690          *  Given pll_ps and ref_ps, find:
 691          *    pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005
 692          *  where { 1 < best_div1 < 32, 1 < best_mult < 256 }
 693          *    pll_ps_calc = best_div1 / (ref_ps * best_mult)
 694          */
 695         best_diff = 0x7fffffff;
 696         best_mult = 2;
 697         best_div1 = 32;
 698         for (t_div1 = 2; t_div1 < 32; t_div1 += 1) {
 699                 u_int rr, t_mult, t_pll_ps;
 700                 int diff;
 701
 702                 /*
 703                  * Find the multiplier for this divisor
 704                  */
 705                 rr = ref_ps * t_div1;
 706                 t_mult = (rr + pll_ps / 2) / pll_ps;
 707
 708                 /*
 709                  * Is the multiplier within the correct range?
 710                  */
 711                 if (t_mult > 256 || t_mult < 2)
 712                         continue;
 713
 714                 /*
 715                  * Calculate the actual clock period from this multiplier
 716                  * and divisor, and estimate the error.
 717                  */
 718                 t_pll_ps = (rr + t_mult / 2) / t_mult;
 719                 diff = pll_ps - t_pll_ps;
 720                 if (diff < 0)
 721                         diff = -diff;
 722
 723                 if (diff < best_diff) {
 724                         best_diff = diff;
 725                         best_mult = t_mult;
 726                         best_div1 = t_div1;
 727                 }
 728
 729                 /*
 730                  * If we hit an exact value, there is no point in continuing.
 731                  */
 732                 if (diff == 0)
 733                         break;
 734         }
 735
 736         /*
 737          * Step 3:
 738          *  combine values
 739          */
 740         hw->clock_mult = best_mult - 1;
 741         hw->clock_div  = div2 << 6 | (best_div1 - 1);
 742
 743         vco = ref_ps * best_div1 / best_mult;
 744         if ((ref_ps == 40690) && (vco < 5556))
 745                 /* Set VFSEL when VCO > 180MHz (5.556 ps). */
 746                 hw->clock_div |= EXT_DCLK_DIV_VFSEL;
 747
 748         return 0;
 749 }
 750
 751 /*
 752  *    Set the User Defined Part of the Display
 753  */
 754 static int
 755 cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 756 {
 757         struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
 758         struct par_info hw;
 759         unsigned int mem;
 760         int err;
 761
 762         var->transp.msb_right   = 0;
 763         var->red.msb_right      = 0;
 764         var->green.msb_right    = 0;
 765         var->blue.msb_right     = 0;
 766         var->transp.offset      = 0;
 767         var->transp.length      = 0;
 768
 769         switch (var->bits_per_pixel) {
 770         case 8: /* PSEUDOCOLOUR, 256 */
 771                 var->red.offset         = 0;
 772                 var->red.length         = 8;
 773                 var->green.offset       = 0;
 774                 var->green.length       = 8;
 775                 var->blue.offset        = 0;
 776                 var->blue.length        = 8;
 777                 break;
 778
 779         case 16:/* DIRECTCOLOUR, 64k or 32k */
 780                 switch (var->green.length) {
 781                 case 6: /* RGB565, 64k */
 782                         var->red.offset         = 11;
 783                         var->red.length         = 5;
 784                         var->green.offset       = 5;
 785                         var->green.length       = 6;
 786                         var->blue.offset        = 0;
 787                         var->blue.length        = 5;
 788                         break;
 789
 790                 default:
 791                 case 5: /* RGB555, 32k */
 792                         var->red.offset         = 10;
 793                         var->red.length         = 5;
 794                         var->green.offset       = 5;
 795                         var->green.length       = 5;
 796                         var->blue.offset        = 0;
 797                         var->blue.length        = 5;
 798                         break;
 799
 800                 case 4: /* RGB444, 4k + transparency? */
 801                         var->transp.offset      = 12;
 802                         var->transp.length      = 4;
 803                         var->red.offset         = 8;
 804                         var->red.length         = 4;
 805                         var->green.offset       = 4;
 806                         var->green.length       = 4;
 807                         var->blue.offset        = 0;
 808                         var->blue.length        = 4;
 809                         break;
 810                 }
 811                 break;
 812
 813         case 24:/* TRUECOLOUR, 16m */
 814                 var->red.offset         = 16;
 815                 var->red.length         = 8;
 816                 var->green.offset       = 8;
 817                 var->green.length       = 8;
 818                 var->blue.offset        = 0;
 819                 var->blue.length        = 8;
 820                 break;
 821
 822         case 32:/* TRUECOLOUR, 16m */
 823                 var->transp.offset      = 24;
 824                 var->transp.length      = 8;
 825                 var->red.offset         = 16;
 826                 var->red.length         = 8;
 827                 var->green.offset       = 8;
 828                 var->green.length       = 8;
 829                 var->blue.offset        = 0;
 830                 var->blue.length        = 8;
 831                 break;
 832
 833         default:
 834                 return -EINVAL;
 835         }
 836
 837         mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8);
 838         if (mem > cfb->fb.fix.smem_len)
 839                 var->yres_virtual = cfb->fb.fix.smem_len * 8 /
 840                                     (var->bits_per_pixel * var->xres_virtual);
 841
 842         if (var->yres > var->yres_virtual)
 843                 var->yres = var->yres_virtual;
 844         if (var->xres > var->xres_virtual)
 845                 var->xres = var->xres_virtual;
 846
 847         err = cyber2000fb_decode_clock(&hw, cfb, var);
 848         if (err)
 849                 return err;
 850
 851         err = cyber2000fb_decode_crtc(&hw, cfb, var);
 852         if (err)
 853                 return err;
 854
 855         return 0;
 856 }
 857
 858 static int cyber2000fb_set_par(struct fb_info *info)
 859 {
 860         struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
 861         struct fb_var_screeninfo *var = &cfb->fb.var;
 862         struct par_info hw;
 863         unsigned int mem;
 864
 865         hw.width = var->xres_virtual;
 866         hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT;
 867
 868         switch (var->bits_per_pixel) {
 869         case 8:
 870                 hw.co_pixfmt            = CO_PIXFMT_8BPP;
 871                 hw.pitch                = hw.width >> 3;
 872                 hw.extseqmisc           = EXT_SEQ_MISC_8;
 873                 break;
 874
 875         case 16:
 876                 hw.co_pixfmt            = CO_PIXFMT_16BPP;
 877                 hw.pitch                = hw.width >> 2;
 878
 879                 switch (var->green.length) {
 880                 case 6: /* RGB565, 64k */
 881                         hw.extseqmisc   = EXT_SEQ_MISC_16_RGB565;
 882                         break;
 883                 case 5: /* RGB555, 32k */
 884                         hw.extseqmisc   = EXT_SEQ_MISC_16_RGB555;
 885                         break;
 886                 case 4: /* RGB444, 4k + transparency? */
 887                         hw.extseqmisc   = EXT_SEQ_MISC_16_RGB444;
 888                         break;
 889                 default:
 890                         BUG();
 891                 }
 892                 break;
 893
 894         case 24:/* TRUECOLOUR, 16m */
 895                 hw.co_pixfmt            = CO_PIXFMT_24BPP;
 896                 hw.width                *= 3;
 897                 hw.pitch                = hw.width >> 3;
 898                 hw.ramdac               |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
 899                 hw.extseqmisc           = EXT_SEQ_MISC_24_RGB888;
 900                 break;
 901
 902         case 32:/* TRUECOLOUR, 16m */
 903                 hw.co_pixfmt            = CO_PIXFMT_32BPP;
 904                 hw.pitch                = hw.width >> 1;
 905                 hw.ramdac               |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
 906                 hw.extseqmisc           = EXT_SEQ_MISC_32;
 907                 break;
 908
 909         default:
 910                 BUG();
 911         }
 912
 913         /*
 914          * Sigh, this is absolutely disgusting, but caused by
 915          * the way the fbcon developers want to separate out
 916          * the "checking" and the "setting" of the video mode.
 917          *
 918          * If the mode is not suitable for the hardware here,
 919          * we can't prevent it being set by returning an error.
 920          *
 921          * In theory, since NetWinders contain just one VGA card,
 922          * we should never end up hitting this problem.
 923          */
 924         BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0);
 925         BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0);
 926
 927         hw.width -= 1;
 928         hw.fetch = hw.pitch;
 929         if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT))
 930                 hw.fetch <<= 1;
 931         hw.fetch += 1;
 932
 933         cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
 934
 935         /*
 936          * Same here - if the size of the video mode exceeds the
 937          * available RAM, we can't prevent this mode being set.
 938          *
 939          * In theory, since NetWinders contain just one VGA card,
 940          * we should never end up hitting this problem.
 941          */
 942         mem = cfb->fb.fix.line_length * var->yres_virtual;
 943         BUG_ON(mem > cfb->fb.fix.smem_len);
 944
 945         /*
 946          * 8bpp displays are always pseudo colour.  16bpp and above
 947          * are direct colour or true colour, depending on whether
 948          * the RAMDAC palettes are bypassed.  (Direct colour has
 949          * palettes, true colour does not.)
 950          */
 951         if (var->bits_per_pixel == 8)
 952                 cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
 953         else if (hw.ramdac & RAMDAC_BYPASS)
 954                 cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
 955         else
 956                 cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR;
 957
 958         cyber2000fb_set_timing(cfb, &hw);
 959         cyber2000fb_update_start(cfb, var);
 960
 961         return 0;
 962 }
 963
 964 /*
 965  *    Pan or Wrap the Display
 966  */
 967 static int
 968 cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
 969 {
 970         struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
 971
 972         if (cyber2000fb_update_start(cfb, var))
 973                 return -EINVAL;
 974
 975         cfb->fb.var.xoffset = var->xoffset;
 976         cfb->fb.var.yoffset = var->yoffset;
 977
 978         if (var->vmode & FB_VMODE_YWRAP) {
 979                 cfb->fb.var.vmode |= FB_VMODE_YWRAP;
 980         } else {
 981                 cfb->fb.var.vmode &= ~FB_VMODE_YWRAP;
 982         }
 983
 984         return 0;
 985 }
 986
 987 /*
 988  *    (Un)Blank the display.
 989  *
 990  *  Blank the screen if blank_mode != 0, else unblank. If
 991  *  blank == NULL then the caller blanks by setting the CLUT
 992  *  (Color Look Up Table) to all black. Return 0 if blanking
 993  *  succeeded, != 0 if un-/blanking failed due to e.g. a
 994  *  video mode which doesn't support it. Implements VESA
 995  *  suspend and powerdown modes on hardware that supports
 996  *  disabling hsync/vsync:
 997  *    blank_mode == 2: suspend vsync
 998  *    blank_mode == 3: suspend hsync
 999  *    blank_mode == 4: powerdown
1000  *
1001  *  wms...Enable VESA DMPS compatible powerdown mode
1002  *  run "setterm -powersave powerdown" to take advantage
1003  */
1004 static int cyber2000fb_blank(int blank, struct fb_info *info)
1005 {
1006         struct cfb_info *cfb = container_of(info, struct cfb_info, fb);
1007         unsigned int sync = 0;
1008         int i;
1009
1010         switch (blank) {
1011         case FB_BLANK_POWERDOWN:        /* powerdown - both sync lines down */
1012                 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0;
1013                 break;
1014         case FB_BLANK_HSYNC_SUSPEND:    /* hsync off */
1015                 sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0;
1016                 break;
1017         case FB_BLANK_VSYNC_SUSPEND:    /* vsync off */
1018                 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL;
1019                 break;
1020         case FB_BLANK_NORMAL:           /* soft blank */
1021         default:                        /* unblank */
1022                 break;
1023         }
1024
1025         cyber2000_grphw(EXT_SYNC_CTL, sync, cfb);
1026
1027         if (blank <= 1) {
1028                 /* turn on ramdacs */
1029                 cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS |
1030                                            RAMDAC_RAMPWRDN);
1031                 cyber2000fb_write_ramdac_ctrl(cfb);
1032         }
1033
1034         /*
1035          * Soft blank/unblank the display.
1036          */
1037         if (blank) {    /* soft blank */
1038                 for (i = 0; i < NR_PALETTE; i++) {
1039                         cyber2000fb_writeb(i, 0x3c8, cfb);
1040                         cyber2000fb_writeb(0, 0x3c9, cfb);
1041                         cyber2000fb_writeb(0, 0x3c9, cfb);
1042                         cyber2000fb_writeb(0, 0x3c9, cfb);
1043                 }
1044         } else {        /* unblank */
1045                 for (i = 0; i < NR_PALETTE; i++) {
1046                         cyber2000fb_writeb(i, 0x3c8, cfb);
1047                         cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb);
1048                         cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb);
1049                         cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb);
1050                 }
1051         }
1052
1053         if (blank >= 2) {
1054                 /* turn off ramdacs */
1055                 cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS |
1056                                          RAMDAC_RAMPWRDN;
1057                 cyber2000fb_write_ramdac_ctrl(cfb);
1058         }
1059
1060         return 0;
1061 }
1062
1063 static const struct fb_ops cyber2000fb_ops = {
1064         .owner          = THIS_MODULE,
1065         .fb_check_var   = cyber2000fb_check_var,
1066         .fb_set_par     = cyber2000fb_set_par,
1067         .fb_setcolreg   = cyber2000fb_setcolreg,
1068         .fb_blank       = cyber2000fb_blank,
1069         .fb_pan_display = cyber2000fb_pan_display,
1070         .fb_fillrect    = cyber2000fb_fillrect,
1071         .fb_copyarea    = cyber2000fb_copyarea,
1072         .fb_imageblit   = cyber2000fb_imageblit,
1073         .fb_sync        = cyber2000fb_sync,
1074 };
1075
1076 /*
1077  * This is the only "static" reference to the internal data structures
1078  * of this driver.  It is here solely at the moment to support the other
1079  * CyberPro modules external to this driver.
1080  */
1081 static struct cfb_info *int_cfb_info;
1082
1083 /*
1084  * Enable access to the extended registers
1085  */
1086 void cyber2000fb_enable_extregs(struct cfb_info *cfb)
1087 {
1088         cfb->func_use_count += 1;
1089
1090         if (cfb->func_use_count == 1) {
1091                 int old;
1092
1093                 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1094                 old |= EXT_FUNC_CTL_EXTREGENBL;
1095                 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1096         }
1097 }
1098 EXPORT_SYMBOL(cyber2000fb_enable_extregs);
1099
1100 /*
1101  * Disable access to the extended registers
1102  */
1103 void cyber2000fb_disable_extregs(struct cfb_info *cfb)
1104 {
1105         if (cfb->func_use_count == 1) {
1106                 int old;
1107
1108                 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1109                 old &= ~EXT_FUNC_CTL_EXTREGENBL;
1110                 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1111         }
1112
1113         if (cfb->func_use_count == 0)
1114                 printk(KERN_ERR "disable_extregs: count = 0\n");
1115         else
1116                 cfb->func_use_count -= 1;
1117 }
1118 EXPORT_SYMBOL(cyber2000fb_disable_extregs);
1119
1120 /*
1121  * Attach a capture/tv driver to the core CyberX0X0 driver.
1122  */
1123 int cyber2000fb_attach(struct cyberpro_info *info, int idx)
1124 {
1125         if (int_cfb_info != NULL) {
1126                 info->dev             = int_cfb_info->fb.device;
1127 #ifdef CONFIG_FB_CYBER2000_I2C
1128                 info->i2c             = &int_cfb_info->i2c_adapter;
1129 #else
1130                 info->i2c             = NULL;
1131 #endif
1132                 info->regs            = int_cfb_info->regs;
1133                 info->irq             = int_cfb_info->irq;
1134                 info->fb              = int_cfb_info->fb.screen_base;
1135                 info->fb_size         = int_cfb_info->fb.fix.smem_len;
1136                 info->info            = int_cfb_info;
1137
1138                 strscpy(info->dev_name, int_cfb_info->fb.fix.id,
1139                         sizeof(info->dev_name));
1140         }
1141
1142         return int_cfb_info != NULL;
1143 }
1144 EXPORT_SYMBOL(cyber2000fb_attach);
1145
1146 /*
1147  * Detach a capture/tv driver from the core CyberX0X0 driver.
1148  */
1149 void cyber2000fb_detach(int idx)
1150 {
1151 }
1152 EXPORT_SYMBOL(cyber2000fb_detach);
1153
1154 #ifdef CONFIG_FB_CYBER2000_DDC
1155
1156 #define DDC_REG         0xb0
1157 #define DDC_SCL_OUT     (1 << 0)
1158 #define DDC_SDA_OUT     (1 << 4)
1159 #define DDC_SCL_IN      (1 << 2)
1160 #define DDC_SDA_IN      (1 << 6)
1161
1162 static void cyber2000fb_enable_ddc(struct cfb_info *cfb)
1163         __acquires(&cfb->reg_b0_lock)
1164 {
1165         spin_lock(&cfb->reg_b0_lock);
1166         cyber2000fb_writew(0x1bf, 0x3ce, cfb);
1167 }
1168
1169 static void cyber2000fb_disable_ddc(struct cfb_info *cfb)
1170         __releases(&cfb->reg_b0_lock)
1171 {
1172         cyber2000fb_writew(0x0bf, 0x3ce, cfb);
1173         spin_unlock(&cfb->reg_b0_lock);
1174 }
1175
1176
1177 static void cyber2000fb_ddc_setscl(void *data, int val)
1178 {
1179         struct cfb_info *cfb = data;
1180         unsigned char reg;
1181
1182         cyber2000fb_enable_ddc(cfb);
1183         reg = cyber2000_grphr(DDC_REG, cfb);
1184         if (!val)       /* bit is inverted */
1185                 reg |= DDC_SCL_OUT;
1186         else
1187                 reg &= ~DDC_SCL_OUT;
1188         cyber2000_grphw(DDC_REG, reg, cfb);
1189         cyber2000fb_disable_ddc(cfb);
1190 }
1191
1192 static void cyber2000fb_ddc_setsda(void *data, int val)
1193 {
1194         struct cfb_info *cfb = data;
1195         unsigned char reg;
1196
1197         cyber2000fb_enable_ddc(cfb);
1198         reg = cyber2000_grphr(DDC_REG, cfb);
1199         if (!val)       /* bit is inverted */
1200                 reg |= DDC_SDA_OUT;
1201         else
1202                 reg &= ~DDC_SDA_OUT;
1203         cyber2000_grphw(DDC_REG, reg, cfb);
1204         cyber2000fb_disable_ddc(cfb);
1205 }
1206
1207 static int cyber2000fb_ddc_getscl(void *data)
1208 {
1209         struct cfb_info *cfb = data;
1210         int retval;
1211
1212         cyber2000fb_enable_ddc(cfb);
1213         retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SCL_IN);
1214         cyber2000fb_disable_ddc(cfb);
1215
1216         return retval;
1217 }
1218
1219 static int cyber2000fb_ddc_getsda(void *data)
1220 {
1221         struct cfb_info *cfb = data;
1222         int retval;
1223
1224         cyber2000fb_enable_ddc(cfb);
1225         retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SDA_IN);
1226         cyber2000fb_disable_ddc(cfb);
1227
1228         return retval;
1229 }
1230
1231 static int cyber2000fb_setup_ddc_bus(struct cfb_info *cfb)
1232 {
1233         strscpy(cfb->ddc_adapter.name, cfb->fb.fix.id,
1234                 sizeof(cfb->ddc_adapter.name));
1235         cfb->ddc_adapter.owner          = THIS_MODULE;
1236         cfb->ddc_adapter.class          = I2C_CLASS_DDC;
1237         cfb->ddc_adapter.algo_data      = &cfb->ddc_algo;
1238         cfb->ddc_adapter.dev.parent     = cfb->fb.device;
1239         cfb->ddc_algo.setsda            = cyber2000fb_ddc_setsda;
1240         cfb->ddc_algo.setscl            = cyber2000fb_ddc_setscl;
1241         cfb->ddc_algo.getsda            = cyber2000fb_ddc_getsda;
1242         cfb->ddc_algo.getscl            = cyber2000fb_ddc_getscl;
1243         cfb->ddc_algo.udelay            = 10;
1244         cfb->ddc_algo.timeout           = 20;
1245         cfb->ddc_algo.data              = cfb;
1246
1247         i2c_set_adapdata(&cfb->ddc_adapter, cfb);
1248
1249         return i2c_bit_add_bus(&cfb->ddc_adapter);
1250 }
1251 #endif /* CONFIG_FB_CYBER2000_DDC */
1252
1253 #ifdef CONFIG_FB_CYBER2000_I2C
1254 static void cyber2000fb_i2c_setsda(void *data, int state)
1255 {
1256         struct cfb_info *cfb = data;
1257         unsigned int latch2;
1258
1259         spin_lock(&cfb->reg_b0_lock);
1260         latch2 = cyber2000_grphr(EXT_LATCH2, cfb);
1261         latch2 &= EXT_LATCH2_I2C_CLKEN;
1262         if (state)
1263                 latch2 |= EXT_LATCH2_I2C_DATEN;
1264         cyber2000_grphw(EXT_LATCH2, latch2, cfb);
1265         spin_unlock(&cfb->reg_b0_lock);
1266 }
1267
1268 static void cyber2000fb_i2c_setscl(void *data, int state)
1269 {
1270         struct cfb_info *cfb = data;
1271         unsigned int latch2;
1272
1273         spin_lock(&cfb->reg_b0_lock);
1274         latch2 = cyber2000_grphr(EXT_LATCH2, cfb);
1275         latch2 &= EXT_LATCH2_I2C_DATEN;
1276         if (state)
1277                 latch2 |= EXT_LATCH2_I2C_CLKEN;
1278         cyber2000_grphw(EXT_LATCH2, latch2, cfb);
1279         spin_unlock(&cfb->reg_b0_lock);
1280 }
1281
1282 static int cyber2000fb_i2c_getsda(void *data)
1283 {
1284         struct cfb_info *cfb = data;
1285         int ret;
1286
1287         spin_lock(&cfb->reg_b0_lock);
1288         ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_DAT);
1289         spin_unlock(&cfb->reg_b0_lock);
1290
1291         return ret;
1292 }
1293
1294 static int cyber2000fb_i2c_getscl(void *data)
1295 {
1296         struct cfb_info *cfb = data;
1297         int ret;
1298
1299         spin_lock(&cfb->reg_b0_lock);
1300         ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_CLK);
1301         spin_unlock(&cfb->reg_b0_lock);
1302
1303         return ret;
1304 }
1305
1306 static int cyber2000fb_i2c_register(struct cfb_info *cfb)
1307 {
1308         strscpy(cfb->i2c_adapter.name, cfb->fb.fix.id,
1309                 sizeof(cfb->i2c_adapter.name));
1310         cfb->i2c_adapter.owner = THIS_MODULE;
1311         cfb->i2c_adapter.algo_data = &cfb->i2c_algo;
1312         cfb->i2c_adapter.dev.parent = cfb->fb.device;
1313         cfb->i2c_algo.setsda = cyber2000fb_i2c_setsda;
1314         cfb->i2c_algo.setscl = cyber2000fb_i2c_setscl;
1315         cfb->i2c_algo.getsda = cyber2000fb_i2c_getsda;
1316         cfb->i2c_algo.getscl = cyber2000fb_i2c_getscl;
1317         cfb->i2c_algo.udelay = 5;
1318         cfb->i2c_algo.timeout = msecs_to_jiffies(100);
1319         cfb->i2c_algo.data = cfb;
1320
1321         return i2c_bit_add_bus(&cfb->i2c_adapter);
1322 }
1323
1324 static void cyber2000fb_i2c_unregister(struct cfb_info *cfb)
1325 {
1326         i2c_del_adapter(&cfb->i2c_adapter);
1327 }
1328 #else
1329 #define cyber2000fb_i2c_register(cfb)   (0)
1330 #define cyber2000fb_i2c_unregister(cfb) do { } while (0)
1331 #endif
1332
1333 /*
1334  * These parameters give
1335  * 640x480, hsync 31.5kHz, vsync 60Hz
1336  */
1337 static const struct fb_videomode cyber2000fb_default_mode = {
1338         .refresh        = 60,
1339         .xres           = 640,
1340         .yres           = 480,
1341         .pixclock       = 39722,
1342         .left_margin    = 56,
1343         .right_margin   = 16,
1344         .upper_margin   = 34,
1345         .lower_margin   = 9,
1346         .hsync_len      = 88,
1347         .vsync_len      = 2,
1348         .sync           = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
1349         .vmode          = FB_VMODE_NONINTERLACED
1350 };
1351
1352 static char igs_regs[] = {
1353         EXT_CRT_IRQ,            0,
1354         EXT_CRT_TEST,           0,
1355         EXT_SYNC_CTL,           0,
1356         EXT_SEG_WRITE_PTR,      0,
1357         EXT_SEG_READ_PTR,       0,
1358         EXT_BIU_MISC,           EXT_BIU_MISC_LIN_ENABLE |
1359                                 EXT_BIU_MISC_COP_ENABLE |
1360                                 EXT_BIU_MISC_COP_BFC,
1361         EXT_FUNC_CTL,           0,
1362         CURS_H_START,           0,
1363         CURS_H_START + 1,       0,
1364         CURS_H_PRESET,          0,
1365         CURS_V_START,           0,
1366         CURS_V_START + 1,       0,
1367         CURS_V_PRESET,          0,
1368         CURS_CTL,               0,
1369         EXT_ATTRIB_CTL,         EXT_ATTRIB_CTL_EXT,
1370         EXT_OVERSCAN_RED,       0,
1371         EXT_OVERSCAN_GREEN,     0,
1372         EXT_OVERSCAN_BLUE,      0,
1373
1374         /* some of these are questionable when we have a BIOS */
1375         EXT_MEM_CTL0,           EXT_MEM_CTL0_7CLK |
1376                                 EXT_MEM_CTL0_RAS_1 |
1377                                 EXT_MEM_CTL0_MULTCAS,
1378         EXT_HIDDEN_CTL1,        0x30,
1379         EXT_FIFO_CTL,           0x0b,
1380         EXT_FIFO_CTL + 1,       0x17,
1381         0x76,                   0x00,
1382         EXT_HIDDEN_CTL4,        0xc8
1383 };
1384
1385 /*
1386  * Initialise the CyberPro hardware.  On the CyberPro5XXXX,
1387  * ensure that we're using the correct PLL (5XXX's may be
1388  * programmed to use an additional set of PLLs.)
1389  */
1390 static void cyberpro_init_hw(struct cfb_info *cfb)
1391 {
1392         int i;
1393
1394         for (i = 0; i < sizeof(igs_regs); i += 2)
1395                 cyber2000_grphw(igs_regs[i], igs_regs[i + 1], cfb);
1396
1397         if (cfb->id == ID_CYBERPRO_5000) {
1398                 unsigned char val;
1399                 cyber2000fb_writeb(0xba, 0x3ce, cfb);
1400                 val = cyber2000fb_readb(0x3cf, cfb) & 0x80;
1401                 cyber2000fb_writeb(val, 0x3cf, cfb);
1402         }
1403 }
1404
1405 static struct cfb_info *cyberpro_alloc_fb_info(unsigned int id, char *name)
1406 {
1407         struct cfb_info *cfb;
1408
1409         cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL);
1410         if (!cfb)
1411                 return NULL;
1412
1413
1414         cfb->id                 = id;
1415
1416         if (id == ID_CYBERPRO_5000)
1417                 cfb->ref_ps     = 40690; /* 24.576 MHz */
1418         else
1419                 cfb->ref_ps     = 69842; /* 14.31818 MHz (69841?) */
1420
1421         cfb->divisors[0]        = 1;
1422         cfb->divisors[1]        = 2;
1423         cfb->divisors[2]        = 4;
1424
1425         if (id == ID_CYBERPRO_2000)
1426                 cfb->divisors[3] = 8;
1427         else
1428                 cfb->divisors[3] = 6;
1429
1430         strcpy(cfb->fb.fix.id, name);
1431
1432         cfb->fb.fix.type        = FB_TYPE_PACKED_PIXELS;
1433         cfb->fb.fix.type_aux    = 0;
1434         cfb->fb.fix.xpanstep    = 0;
1435         cfb->fb.fix.ypanstep    = 1;
1436         cfb->fb.fix.ywrapstep   = 0;
1437
1438         switch (id) {
1439         case ID_IGA_1682:
1440                 cfb->fb.fix.accel = 0;
1441                 break;
1442
1443         case ID_CYBERPRO_2000:
1444                 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000;
1445                 break;
1446
1447         case ID_CYBERPRO_2010:
1448                 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010;
1449                 break;
1450
1451         case ID_CYBERPRO_5000:
1452                 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000;
1453                 break;
1454         }
1455
1456         cfb->fb.var.nonstd      = 0;
1457         cfb->fb.var.activate    = FB_ACTIVATE_NOW;
1458         cfb->fb.var.height      = -1;
1459         cfb->fb.var.width       = -1;
1460         cfb->fb.var.accel_flags = FB_ACCELF_TEXT;
1461
1462         cfb->fb.fbops           = &cyber2000fb_ops;
1463         cfb->fb.flags           = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
1464         cfb->fb.pseudo_palette  = cfb->pseudo_palette;
1465
1466         spin_lock_init(&cfb->reg_b0_lock);
1467
1468         fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
1469
1470         return cfb;
1471 }
1472
1473 static void cyberpro_free_fb_info(struct cfb_info *cfb)
1474 {
1475         if (cfb) {
1476                 /*
1477                  * Free the colourmap
1478                  */
1479                 fb_alloc_cmap(&cfb->fb.cmap, 0, 0);
1480
1481                 kfree(cfb);
1482         }
1483 }
1484
1485 /*
1486  * Parse Cyber2000fb options.  Usage:
1487  *  video=cyber2000:font:fontname
1488  */
1489 #ifndef MODULE
1490 static int cyber2000fb_setup(char *options)
1491 {
1492         char *opt;
1493
1494         if (!options || !*options)
1495                 return 0;
1496
1497         while ((opt = strsep(&options, ",")) != NULL) {
1498                 if (!*opt)
1499                         continue;
1500
1501                 if (strncmp(opt, "font:", 5) == 0) {
1502                         static char default_font_storage[40];
1503
1504                         strscpy(default_font_storage, opt + 5,
1505                                 sizeof(default_font_storage));
1506                         default_font = default_font_storage;
1507                         continue;
1508                 }
1509
1510                 printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
1511         }
1512         return 0;
1513 }
1514 #endif  /*  MODULE  */
1515
1516 /*
1517  * The CyberPro chips can be placed on many different bus types.
1518  * This probe function is common to all bus types.  The bus-specific
1519  * probe function is expected to have:
1520  *  - enabled access to the linear memory region
1521  *  - memory mapped access to the registers
1522  *  - initialised mem_ctl1 and mem_ctl2 appropriately.
1523  */
1524 static int cyberpro_common_probe(struct cfb_info *cfb)
1525 {
1526         u_long smem_size;
1527         u_int h_sync, v_sync;
1528         int err;
1529
1530         cyberpro_init_hw(cfb);
1531
1532         /*
1533          * Get the video RAM size and width from the VGA register.
1534          * This should have been already initialised by the BIOS,
1535          * but if it's garbage, claim default 1MB VRAM (woody)
1536          */
1537         cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb);
1538         cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb);
1539
1540         /*
1541          * Determine the size of the memory.
1542          */
1543         switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) {
1544         case MEM_CTL2_SIZE_4MB:
1545                 smem_size = 0x00400000;
1546                 break;
1547         case MEM_CTL2_SIZE_2MB:
1548                 smem_size = 0x00200000;
1549                 break;
1550         case MEM_CTL2_SIZE_1MB:
1551                 smem_size = 0x00100000;
1552                 break;
1553         default:
1554                 smem_size = 0x00100000;
1555                 break;
1556         }
1557
1558         cfb->fb.fix.smem_len   = smem_size;
1559         cfb->fb.fix.mmio_len   = MMIO_SIZE;
1560         cfb->fb.screen_base    = cfb->region;
1561
1562 #ifdef CONFIG_FB_CYBER2000_DDC
1563         if (cyber2000fb_setup_ddc_bus(cfb) == 0)
1564                 cfb->ddc_registered = true;
1565 #endif
1566
1567         err = -EINVAL;
1568         if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
1569                           &cyber2000fb_default_mode, 8)) {
1570                 printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id);
1571                 goto failed;
1572         }
1573
1574         cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 /
1575                         (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual);
1576
1577         if (cfb->fb.var.yres_virtual < cfb->fb.var.yres)
1578                 cfb->fb.var.yres_virtual = cfb->fb.var.yres;
1579
1580 /*      fb_set_var(&cfb->fb.var, -1, &cfb->fb); */
1581
1582         /*
1583          * Calculate the hsync and vsync frequencies.  Note that
1584          * we split the 1e12 constant up so that we can preserve
1585          * the precision and fit the results into 32-bit registers.
1586          *  (1953125000 * 512 = 1e12)
1587          */
1588         h_sync = 1953125000 / cfb->fb.var.pixclock;
1589         h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin +
1590                  cfb->fb.var.right_margin + cfb->fb.var.hsync_len);
1591         v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin +
1592                  cfb->fb.var.lower_margin + cfb->fb.var.vsync_len);
1593
1594         printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
1595                 cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10,
1596                 cfb->fb.var.xres, cfb->fb.var.yres,
1597                 h_sync / 1000, h_sync % 1000, v_sync);
1598
1599         err = cyber2000fb_i2c_register(cfb);
1600         if (err)
1601                 goto failed;
1602
1603         err = register_framebuffer(&cfb->fb);
1604         if (err)
1605                 cyber2000fb_i2c_unregister(cfb);
1606
1607 failed:
1608 #ifdef CONFIG_FB_CYBER2000_DDC
1609         if (err && cfb->ddc_registered)
1610                 i2c_del_adapter(&cfb->ddc_adapter);
1611 #endif
1612         return err;
1613 }
1614
1615 static void cyberpro_common_remove(struct cfb_info *cfb)
1616 {
1617         unregister_framebuffer(&cfb->fb);
1618 #ifdef CONFIG_FB_CYBER2000_DDC
1619         if (cfb->ddc_registered)
1620                 i2c_del_adapter(&cfb->ddc_adapter);
1621 #endif
1622         cyber2000fb_i2c_unregister(cfb);
1623 }
1624
1625 static void cyberpro_common_resume(struct cfb_info *cfb)
1626 {
1627         cyberpro_init_hw(cfb);
1628
1629         /*
1630          * Reprogram the MEM_CTL1 and MEM_CTL2 registers
1631          */
1632         cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb);
1633         cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb);
1634
1635         /*
1636          * Restore the old video mode and the palette.
1637          * We also need to tell fbcon to redraw the console.
1638          */
1639         cyber2000fb_set_par(&cfb->fb);
1640 }
1641
1642 /*
1643  * We need to wake up the CyberPro, and make sure its in linear memory
1644  * mode.  Unfortunately, this is specific to the platform and card that
1645  * we are running on.
1646  *
1647  * On x86 and ARM, should we be initialising the CyberPro first via the
1648  * IO registers, and then the MMIO registers to catch all cases?  Can we
1649  * end up in the situation where the chip is in MMIO mode, but not awake
1650  * on an x86 system?
1651  */
1652 static int cyberpro_pci_enable_mmio(struct cfb_info *cfb)
1653 {
1654         unsigned char val;
1655
1656 #if defined(__sparc_v9__)
1657 #error "You lose, consult DaveM."
1658 #elif defined(__sparc__)
1659         /*
1660          * SPARC does not have an "outb" instruction, so we generate
1661          * I/O cycles storing into a reserved memory space at
1662          * physical address 0x3000000
1663          */
1664         unsigned char __iomem *iop;
1665
1666         iop = ioremap(0x3000000, 0x5000);
1667         if (iop == NULL) {
1668                 printk(KERN_ERR "iga5000: cannot map I/O\n");
1669                 return -ENOMEM;
1670         }
1671
1672         writeb(0x18, iop + 0x46e8);
1673         writeb(0x01, iop + 0x102);
1674         writeb(0x08, iop + 0x46e8);
1675         writeb(EXT_BIU_MISC, iop + 0x3ce);
1676         writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf);
1677
1678         iounmap(iop);
1679 #else
1680         /*
1681          * Most other machine types are "normal", so
1682          * we use the standard IO-based wakeup.
1683          */
1684         outb(0x18, 0x46e8);
1685         outb(0x01, 0x102);
1686         outb(0x08, 0x46e8);
1687         outb(EXT_BIU_MISC, 0x3ce);
1688         outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf);
1689 #endif
1690
1691         /*
1692          * Allow the CyberPro to accept PCI burst accesses
1693          */
1694         if (cfb->id == ID_CYBERPRO_2010) {
1695                 printk(KERN_INFO "%s: NOT enabling PCI bursts\n",
1696                        cfb->fb.fix.id);
1697         } else {
1698                 val = cyber2000_grphr(EXT_BUS_CTL, cfb);
1699                 if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
1700                         printk(KERN_INFO "%s: enabling PCI bursts\n",
1701                                 cfb->fb.fix.id);
1702
1703                         val |= EXT_BUS_CTL_PCIBURST_WRITE;
1704
1705                         if (cfb->id == ID_CYBERPRO_5000)
1706                                 val |= EXT_BUS_CTL_PCIBURST_READ;
1707
1708                         cyber2000_grphw(EXT_BUS_CTL, val, cfb);
1709                 }
1710         }
1711
1712         return 0;
1713 }
1714
1715 static int cyberpro_pci_probe(struct pci_dev *dev,
1716                               const struct pci_device_id *id)
1717 {
1718         struct cfb_info *cfb;
1719         char name[16];
1720         int err;
1721
1722         sprintf(name, "CyberPro%4X", id->device);
1723
1724         err = aperture_remove_conflicting_pci_devices(dev, name);
1725         if (err)
1726                 return err;
1727
1728         err = pci_enable_device(dev);
1729         if (err)
1730                 return err;
1731
1732         err = -ENOMEM;
1733         cfb = cyberpro_alloc_fb_info(id->driver_data, name);
1734         if (!cfb)
1735                 goto failed_release;
1736
1737         err = pci_request_regions(dev, cfb->fb.fix.id);
1738         if (err)
1739                 goto failed_regions;
1740
1741         cfb->irq = dev->irq;
1742         cfb->region = pci_ioremap_bar(dev, 0);
1743         if (!cfb->region) {
1744                 err = -ENOMEM;
1745                 goto failed_ioremap;
1746         }
1747
1748         cfb->regs = cfb->region + MMIO_OFFSET;
1749         cfb->fb.device = &dev->dev;
1750         cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
1751         cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
1752
1753         /*
1754          * Bring up the hardware.  This is expected to enable access
1755          * to the linear memory region, and allow access to the memory
1756          * mapped registers.  Also, mem_ctl1 and mem_ctl2 must be
1757          * initialised.
1758          */
1759         err = cyberpro_pci_enable_mmio(cfb);
1760         if (err)
1761                 goto failed;
1762
1763         /*
1764          * Use MCLK from BIOS. FIXME: what about hotplug?
1765          */
1766         cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
1767         cfb->mclk_div  = cyber2000_grphr(EXT_MCLK_DIV, cfb);
1768
1769 #ifdef __arm__
1770         /*
1771          * MCLK on the NetWinder and the Shark is fixed at 75MHz
1772          */
1773         if (machine_is_netwinder()) {
1774                 cfb->mclk_mult = 0xdb;
1775                 cfb->mclk_div  = 0x54;
1776         }
1777 #endif
1778
1779         err = cyberpro_common_probe(cfb);
1780         if (err)
1781                 goto failed;
1782
1783         /*
1784          * Our driver data
1785          */
1786         pci_set_drvdata(dev, cfb);
1787         if (int_cfb_info == NULL)
1788                 int_cfb_info = cfb;
1789
1790         return 0;
1791
1792 failed:
1793         iounmap(cfb->region);
1794 failed_ioremap:
1795         pci_release_regions(dev);
1796 failed_regions:
1797         cyberpro_free_fb_info(cfb);
1798 failed_release:
1799         pci_disable_device(dev);
1800         return err;
1801 }
1802
1803 static void cyberpro_pci_remove(struct pci_dev *dev)
1804 {
1805         struct cfb_info *cfb = pci_get_drvdata(dev);
1806
1807         if (cfb) {
1808                 cyberpro_common_remove(cfb);
1809                 iounmap(cfb->region);
1810                 cyberpro_free_fb_info(cfb);
1811
1812                 if (cfb == int_cfb_info)
1813                         int_cfb_info = NULL;
1814
1815                 pci_release_regions(dev);
1816                 pci_disable_device(dev);
1817         }
1818 }
1819
1820 static int __maybe_unused cyberpro_pci_suspend(struct device *dev)
1821 {
1822         return 0;
1823 }
1824
1825 /*
1826  * Re-initialise the CyberPro hardware
1827  */
1828 static int __maybe_unused cyberpro_pci_resume(struct device *dev)
1829 {
1830         struct cfb_info *cfb = dev_get_drvdata(dev);
1831
1832         if (cfb) {
1833                 cyberpro_pci_enable_mmio(cfb);
1834                 cyberpro_common_resume(cfb);
1835         }
1836
1837         return 0;
1838 }
1839
1840 static struct pci_device_id cyberpro_pci_table[] = {
1841 /*      Not yet
1842  *      { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
1843  *              PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 },
1844  */
1845         { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000,
1846                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 },
1847         { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010,
1848                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 },
1849         { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000,
1850                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 },
1851         { 0, }
1852 };
1853
1854 MODULE_DEVICE_TABLE(pci, cyberpro_pci_table);
1855
1856 static SIMPLE_DEV_PM_OPS(cyberpro_pci_pm_ops,
1857                          cyberpro_pci_suspend,
1858                          cyberpro_pci_resume);
1859
1860 static struct pci_driver cyberpro_driver = {
1861         .name           = "CyberPro",
1862         .probe          = cyberpro_pci_probe,
1863         .remove         = cyberpro_pci_remove,
1864         .driver.pm      = &cyberpro_pci_pm_ops,
1865         .id_table       = cyberpro_pci_table
1866 };
1867
1868 /*
1869  * I don't think we can use the "module_init" stuff here because
1870  * the fbcon stuff may not be initialised yet.  Hence the #ifdef
1871  * around module_init.
1872  *
1873  * Tony: "module_init" is now required
1874  */
1875 static int __init cyber2000fb_init(void)
1876 {
1877         int ret = -1, err;
1878
1879 #ifndef MODULE
1880         char *option = NULL;
1881
1882         if (fb_get_options("cyber2000fb", &option))
1883                 return -ENODEV;
1884         cyber2000fb_setup(option);
1885 #endif
1886
1887         err = pci_register_driver(&cyberpro_driver);
1888         if (!err)
1889                 ret = 0;
1890
1891         return ret ? err : 0;
1892 }
1893 module_init(cyber2000fb_init);
1894
1895 static void __exit cyberpro_exit(void)
1896 {
1897         pci_unregister_driver(&cyberpro_driver);
1898 }
1899 module_exit(cyberpro_exit);
1900
1901 MODULE_AUTHOR("Russell King");
1902 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
1903 MODULE_LICENSE("GPL");