1 // SPDX-License-Identifier: GPL-2.0-only
3 * ROHM Semiconductor BD6107 LED Driver
5 * Copyright (C) 2013 Ideas on board SPRL
7 * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
10 #include <linux/backlight.h>
11 #include <linux/delay.h>
12 #include <linux/err.h>
14 #include <linux/gpio/consumer.h>
15 #include <linux/i2c.h>
16 #include <linux/module.h>
17 #include <linux/platform_data/bd6107.h>
18 #include <linux/slab.h>
20 #define BD6107_PSCNT1 0x00
21 #define BD6107_PSCNT1_PSCNTREG2 (1 << 2)
22 #define BD6107_PSCNT1_PSCNTREG1 (1 << 0)
23 #define BD6107_REGVSET 0x02
24 #define BD6107_REGVSET_REG1VSET_2_85V (1 << 2)
25 #define BD6107_REGVSET_REG1VSET_2_80V (0 << 2)
26 #define BD6107_LEDCNT1 0x03
27 #define BD6107_LEDCNT1_LEDONOFF2 (1 << 1)
28 #define BD6107_LEDCNT1_LEDONOFF1 (1 << 0)
29 #define BD6107_PORTSEL 0x04
30 #define BD6107_PORTSEL_LEDM(n) (1 << (n))
31 #define BD6107_RGB1CNT1 0x05
32 #define BD6107_RGB1CNT2 0x06
33 #define BD6107_RGB1CNT3 0x07
34 #define BD6107_RGB1CNT4 0x08
35 #define BD6107_RGB1CNT5 0x09
36 #define BD6107_RGB1FLM 0x0a
37 #define BD6107_RGB2CNT1 0x0b
38 #define BD6107_RGB2CNT2 0x0c
39 #define BD6107_RGB2CNT3 0x0d
40 #define BD6107_RGB2CNT4 0x0e
41 #define BD6107_RGB2CNT5 0x0f
42 #define BD6107_RGB2FLM 0x10
43 #define BD6107_PSCONT3 0x11
44 #define BD6107_SMMONCNT 0x12
45 #define BD6107_DCDCCNT 0x13
46 #define BD6107_IOSEL 0x14
47 #define BD6107_OUT1 0x15
48 #define BD6107_OUT2 0x16
49 #define BD6107_MASK1 0x17
50 #define BD6107_MASK2 0x18
51 #define BD6107_FACTOR1 0x19
52 #define BD6107_FACTOR2 0x1a
53 #define BD6107_CLRFACT1 0x1b
54 #define BD6107_CLRFACT2 0x1c
55 #define BD6107_STATE1 0x1d
56 #define BD6107_LSIVER 0x1e
57 #define BD6107_GRPSEL 0x1f
58 #define BD6107_LEDCNT2 0x20
59 #define BD6107_LEDCNT3 0x21
60 #define BD6107_MCURRENT 0x22
61 #define BD6107_MAINCNT1 0x23
62 #define BD6107_MAINCNT2 0x24
63 #define BD6107_SLOPECNT 0x25
64 #define BD6107_MSLOPE 0x26
65 #define BD6107_RGBSLOPE 0x27
66 #define BD6107_TEST 0x29
67 #define BD6107_SFTRST 0x2a
68 #define BD6107_SFTRSTGD 0x2b
71 struct i2c_client *client;
72 struct backlight_device *backlight;
73 struct bd6107_platform_data *pdata;
74 struct gpio_desc *reset;
77 static int bd6107_write(struct bd6107 *bd, u8 reg, u8 data)
79 return i2c_smbus_write_byte_data(bd->client, reg, data);
82 static int bd6107_backlight_update_status(struct backlight_device *backlight)
84 struct bd6107 *bd = bl_get_data(backlight);
85 int brightness = backlight_get_brightness(backlight);
88 bd6107_write(bd, BD6107_PORTSEL, BD6107_PORTSEL_LEDM(2) |
89 BD6107_PORTSEL_LEDM(1) | BD6107_PORTSEL_LEDM(0));
90 bd6107_write(bd, BD6107_MAINCNT1, brightness);
91 bd6107_write(bd, BD6107_LEDCNT1, BD6107_LEDCNT1_LEDONOFF1);
93 /* Assert the reset line (gpiolib will handle active low) */
94 gpiod_set_value(bd->reset, 1);
96 gpiod_set_value(bd->reset, 0);
102 static int bd6107_backlight_check_fb(struct backlight_device *backlight,
103 struct fb_info *info)
105 struct bd6107 *bd = bl_get_data(backlight);
107 return bd->pdata->fbdev == NULL || bd->pdata->fbdev == info->device;
110 static const struct backlight_ops bd6107_backlight_ops = {
111 .options = BL_CORE_SUSPENDRESUME,
112 .update_status = bd6107_backlight_update_status,
113 .check_fb = bd6107_backlight_check_fb,
116 static int bd6107_probe(struct i2c_client *client,
117 const struct i2c_device_id *id)
119 struct bd6107_platform_data *pdata = dev_get_platdata(&client->dev);
120 struct backlight_device *backlight;
121 struct backlight_properties props;
126 dev_err(&client->dev, "No platform data\n");
130 if (!i2c_check_functionality(client->adapter,
131 I2C_FUNC_SMBUS_BYTE_DATA)) {
132 dev_warn(&client->dev,
133 "I2C adapter doesn't support I2C_FUNC_SMBUS_BYTE\n");
137 bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL);
145 * Request the reset GPIO line with GPIOD_OUT_HIGH meaning asserted,
146 * so in the machine descriptor table (or other hardware description),
147 * the line should be flagged as active low so this will assert
150 bd->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
151 if (IS_ERR(bd->reset)) {
152 dev_err(&client->dev, "unable to request reset GPIO\n");
153 ret = PTR_ERR(bd->reset);
157 memset(&props, 0, sizeof(props));
158 props.type = BACKLIGHT_RAW;
159 props.max_brightness = 128;
160 props.brightness = clamp_t(unsigned int, pdata->def_value, 0,
161 props.max_brightness);
163 backlight = devm_backlight_device_register(&client->dev,
164 dev_name(&client->dev),
165 &bd->client->dev, bd,
166 &bd6107_backlight_ops, &props);
167 if (IS_ERR(backlight)) {
168 dev_err(&client->dev, "failed to register backlight\n");
169 return PTR_ERR(backlight);
172 backlight_update_status(backlight);
173 i2c_set_clientdata(client, backlight);
178 static int bd6107_remove(struct i2c_client *client)
180 struct backlight_device *backlight = i2c_get_clientdata(client);
182 backlight->props.brightness = 0;
183 backlight_update_status(backlight);
188 static const struct i2c_device_id bd6107_ids[] = {
192 MODULE_DEVICE_TABLE(i2c, bd6107_ids);
194 static struct i2c_driver bd6107_driver = {
198 .probe = bd6107_probe,
199 .remove = bd6107_remove,
200 .id_table = bd6107_ids,
203 module_i2c_driver(bd6107_driver);
205 MODULE_DESCRIPTION("Rohm BD6107 Backlight Driver");
206 MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
207 MODULE_LICENSE("GPL");