1 # SPDX-License-Identifier: GPL-2.0
4 tristate "USB Type-C Support"
6 USB Type-C Specification defines a cable and connector for USB where
7 only one type of plug is supported on both ends, i.e. there will not
8 be Type-A plug on one end of the cable and Type-B plug on the other.
9 Determination of the host-to-device relationship happens through a
10 specific Configuration Channel (CC) which goes through the USB Type-C
11 cable. The Configuration Channel may also be used to detect optional
12 Accessory Modes - Analog Audio and Debug - and if USB Power Delivery
13 is supported, the Alternate Modes, where the connector is used for
14 something else then USB communication.
16 USB Power Delivery Specification defines a protocol that can be used
17 to negotiate the voltage and current levels with the connected
18 partners. USB Power Delivery allows higher voltages then the normal
19 5V, up to 20V, and current up to 5A over the cable. The USB Power
20 Delivery protocol is also used to negotiate the optional Alternate
21 Modes when they are supported. USB Power Delivery does not depend on
22 USB Type-C connector, however it is mostly used together with USB
25 USB Type-C and USB Power Delivery Specifications define a set of state
26 machines that need to be implemented in either software or firmware.
27 Simple USB Type-C PHYs, for example USB Type-C Port Controller
28 Interface Specification compliant "Port Controllers" need the state
29 machines to be handled in the OS, but stand-alone USB Type-C and Power
30 Delivery controllers handle the state machines inside their firmware.
31 The USB Type-C and Power Delivery controllers usually function
32 autonomously, and do not necessarily require drivers.
34 Enable this configurations option if you have USB Type-C connectors on
35 your system and 1) you know your USB Type-C hardware requires OS
36 control (a driver) to function, or 2) if you need to be able to read
37 the status of the USB Type-C ports in your system, or 3) if you need
38 to be able to swap the power role (decide are you supplying or
39 consuming power over the cable) or data role (host or device) when
40 both roles are supported.
42 For more information, see the kernel documentation for USB Type-C
43 Connector Class API (Documentation/driver-api/usb/typec.rst)
44 <https://www.kernel.org/doc/html/latest/driver-api/usb/typec.html>
45 and ABI (Documentation/ABI/testing/sysfs-class-typec).
49 source "drivers/usb/typec/tcpm/Kconfig"
51 source "drivers/usb/typec/ucsi/Kconfig"
53 source "drivers/usb/typec/tipd/Kconfig"
56 tristate "Analogix ANX7411 Type-C DRP Port controller driver"
58 depends on USB_ROLE_SWITCH
59 depends on POWER_SUPPLY
61 Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port
64 If you choose to build this driver as a dynamically linked module, the
65 module will be called anx7411.ko.
68 tristate "Richtek RT1719 Sink Only Type-C controller driver"
69 depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
71 depends on POWER_SUPPLY
74 Say Y or M here if your system has Richtek RT1719 sink only
75 Type-C port controller driver.
77 If you choose to build this driver as a dynamically linked module, the
78 module will be called rt1719.ko
80 config TYPEC_HD3SS3220
81 tristate "TI HD3SS3220 Type-C DRP Port controller driver"
83 depends on USB_ROLE_SWITCH
85 Say Y or M here if your system has TI HD3SS3220 Type-C DRP Port
88 If you choose to build this driver as a dynamically linked module, the
89 module will be called hd3ss3220.ko.
91 config TYPEC_STUSB160X
92 tristate "STMicroelectronics STUSB160x Type-C controller driver"
93 depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
97 Say Y or M here if your system has STMicroelectronics STUSB160x
98 Type-C port controller.
100 If you choose to build this driver as a dynamically linked module, the
101 module will be called stusb160x.ko.
103 config TYPEC_WUSB3801
104 tristate "Willsemi WUSB3801 Type-C port controller driver"
108 Say Y or M here if your system has a WUSB3801 Type-C port controller.
110 If you choose to build this driver as a dynamically linked module, the
111 module will be called wusb3801.ko.
113 source "drivers/usb/typec/mux/Kconfig"
115 source "drivers/usb/typec/altmodes/Kconfig"